Docstoc

LOGISTIC MACHINERY

Document Sample
LOGISTIC MACHINERY Powered By Docstoc
					  ASSALAMUALAIKUM & GOOD MORNING




ALWAYS SHOW YOUR LOVE TO YOUR PARENTS
HEAVY MACHINERIES
  EARTH-MOVING
        &
EXCAVATION PLANT
EXCAVATOR
               FUNCTION
 To excavate soil at site during site clearing
  or during cut and fill process at earthwork
  activity.
 To dig trenches or drain
 To remove contaminated soil or unwanted
   soil and transfer it to the tipper truck
 Razing interior or exterior wall
 Installing culverts or irrigation lines or
  utility lines
Excavator Transporting Soil Into The Lorry
EXCAVATOR
BACKHOE
             FUNCTION

 To dig the soil
 The loading bucket can be used to push can
  either carry dirt or gravel sand or other
  materials.
 To excavate soil and transfer it into the
   truck
BACKHOE
MINI BACKHOE
SCRAPER
 It consist of a power unit & a scraper bowl
 Design & basic operation of the scraper
  bowl consist of a shaped bowl with cutting
  edge that can be lowered to cut the top
  surface of the soil to a depth of 300 mm.
 As the bowl moves forward the loosened
  earth is forced into the container and when
  full the cutting edge is raised to seal the
  bowl.
 To ensure that a full load is obtain
 bulldozer can be used where it act as a
 pusher over the last metres of scrape.
Excavate and transport soil where surface
  stripping, site levelling and cut & fill
  activities are planned.
 It is capable of producing a very smooth
  and accurate formation level.
SCRAPER
BULLDOZER
               FUNCTION
 To do stripping at the site
 To create a same level of soil
 Bulldozer can be used to assist scraper.
  Where it act as a pusher over the last metres
  of scrape in order to obtain a full load in the
  shaped bowl of scraper.
BULLDOZER
MOTORGRADER
              FUNCTION
 Used for finishing to fine limits large area
  of ground that have been scraped or
  bulldozed to the required formation level.
 Can only be used for grade the surface.
 Can’t be used for oversite excavation work
  because of their low motive power.
MOTORGRADER
TRANSPORTING
   PLANT
FORKLIFT
               FUNCTION
 Handling mainly palleted materials
  quickly & efficiently around building site
  areas.
 Also able to carry certain unpalleted
  materials, but this activity will need hand
  loading.
As a conclusion, it is to lift & carry material
  from one place to another.
FORKLIFT
TRUCK
               FUNCTION
 To transport excavated topsoil or soil from
  the site to place outside the site.
 To transport construction materials
  (aggregates, sand, bricks) to the area in the
  site.
TIPPER TRUCK
 To transport soil / sand within the
 construction site.
 It is not registered to “Jabatan
  Pengangkutan Jalan and therefore it has no
  plate number.
 It can’t be driven on the road and usually
  trailer used to carry / haul it from site to
  another.
TIPPER TRUCK
DRAGLINE
              FUNCTION
 Used for excavating in loose material and
  soft soils below the level of the machine.
 The accuracy where a dragline can
  excavate depends upon the skill of the
  operator.
DRAGLINE
ROLLER/COMPACTOR
              FUNCTION

 In road construction used to compress the
  asphalt properly in order to get a uniform
  compacted road surface.
 At construction site, used to compress the
  soil that already been leveled, in order to
  produce a well compacted surface or area
  to prevent excessive settlement.
ROLLER / COMPACTER
                 CRANE
 A device or machine for lifting loads by
  means of rope.
 Cranes can be classified to 3 category:
  a) Mobile Cranes
  b) Static / Stationary Cranes
  c) Tower Cranes
          MOBILE CRANES
 many wide variety of design & capacities
  that generally with 360 rotation / slewing
  circle, a low pivot & lifting jib.
 4 types of crane
  a) Self-propelled crane
  b) Lorry-mounted crane
  c) Track mounted crane
  d) Mast cranes
  e) Gantry cranes
SELF-PROPELLED CRANE
LORRY-MOUNTED CRANE
TRACK-MOUNTED CRANE
MAST CRANE
GANTRY CRANE
          STATIC CRANE
 These crane are fixed at their working
 position
 Used primarily for lifting heavy loads such
 as structural steelwork
 Among types of static crane are
  a) Guy derrick
  b) Scotch derrick
  c) Monotower cranes
SCOTCH DERRICK
         TOWER CRANES
 Some basic types of tower cranes are:
  a) Self-supporting static tower cranes
  b) Supported static tower cranes
  c) Travelling tower cranes
  d) Climbing Cranes
CLIMBING CRANE
HOPE YOU GAIN COMPLETE UNDERSTANDING




THANKS FOR THE ATTENTION GIVEN. SYUKRAN

				
DOCUMENT INFO