PAR or # of
Project Standard # Draft # -- <Filename> Stage Balloters
P1202 D9 dated
Jan 2006 --
PE/IC/1202_WG/1202 P1202 pdf> Submitted To Revcom 66
1235- Standard --
PE/IC/1235 2000 <1235-2000.pdf> Submitted To Revcom 65
PE/IC/1617_WG/1617 P1617 ables.pdf> Comment Resolution 62
PE/IC/400.3 P400.3 pdf> Submitted To Revcom 84
PE/IC/404_WG/404 P404 .pdf> Submitted To Revcom 71
PE/IC/835 835-2000 <835-1994.pdf> Submitted To Revcom 108
PE/IC/B3D_WG/592 P592 <P592_dtraft_2.pdf> Ballot 49
Draft 6 --
PE/IC/ICC_WG/400.1 P400.1 electric-April05.pdf> Comment Resolution 88
PE/IC/ICC_WG/532 P532 pdf> Comment Resolution 71
Response Approval Abstain
Ballot Close Date Rate % Rate % Rate % # Comments
03/28/2006 11:59pm ET 90.9% 98.3% 1.7% 1
06/10/2006 11:59pm ET 83.1% 92.5% 1.9% 3
10/28/2005 11:59pm ET 88.7% 94.2% 5.5% 35
05/07/2006 11:59pm ET 88.1% 97.1% 5.4% 1
10/23/2006 11:59pm ET 80.3% 94.2% 8.8% 2
04/28/2006 11:59pm ET 83.3% 97.6% 7.8% 2
11/09/2006 11:59pm ET 49.0% / 13 91.3% 4.2% 62
12/02/2005 11:59pm ET 75.0% 95.3% 3.0% 91
09/15/2006 11:59pm ET 80.3% 89.1% 3.5% 206
resolve comments, reset ballot, terminate ballot
reset ballot, terminate ballot
resolve comments, reset ballot, terminate ballot
resolve comments, reset ballot, terminate ballot
Year of Next Action Status Status 1 New News Action Required Project #
2007 Requested Extension Yes Coming Up 1637
2007 Active Yes Coming Up 82
2007 Requested Extension Yes Active Issue 1617
2007 Requested Extension Balloting Inactive 1425
2007 Active Coming Up 1407
2007 Active Coming Up 1300
2007 Active Coming Up 1234
2007 Requested Extension Yes Active Issue 400.1
2007 Requested Extension Confirm Status 1215
2007 Active Coming Up 1142
2007 Requested Extension Balloting Yes Coming Up 532
2007 Requested Extension Yes Coming Up 404
Project Publication Expiration Date PAR Expiration Date Working Group #
1637 12/1/2006 B10W
P82 1994 9/1/2007 6/1/2005 C14W
P1617 6/1/2006 C7W
P1425 2001 12/1/2006 Inactive C4D
P1407 1998 12/1/2007 12/31/2007 A13W
1300 1996 6/1/2007 8/1/1996 B5D
P1234 12/31/2007 C21W
P400.1 12/1/2007 C17W
1142 1995 1/1/2000 12/1/2007 A11D
P532 1993 1/1/1974 6/1/2006 A7W
P404 2000 6/1/2006 B2W
Paul J.Caronia Eric.Marsden@Borealis
Eric Marsden Group.com
Guide to Select Terminations for Shielded Power Cables 5-46kV
Test Procedure for Impulse Test on Insulated Conductors
Guide for Detection, Mitigation and Control of Concentric Neutral Corrosion in Medium Voltage Underground Cables
Guide for the Evaluation of the Remaining Life of Impregnated Paper Insulated Transmission Cable Systems
Guide for Accelerated Aging Tests for Medium Voltage Extruded Electric Power Cables Using Water Filled Tanks
Guide for Cable Connections for Gas Insulated Substations
Guide for Fault Locating on Shielded Power Cables Systems
Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems reated 5kV and above with High Direct Current
Guide for Application fo Seperable Connections in the Electric Power Industry
Guide for the Selection, Testing, Application and Installation of Cables Utilizing Radial and/or Longitudinal Moisture Barriers
Guide for Selecting and Testing Jackets for Power, Instrumentation and Control Cables
Standard for Extruded and Laminated Dielectric Shielded cable joints rated 2500 to 500kV
StatusStandards have a 5-year life spanPARs - 4-year
PAR Approved 12/02/02
PAR for Rev Approved June, 2001 Standard approved September 11, 2002. Good until December 1, 2007
Coordinate w. Dan Ward 804 775 5328, T&D Committee Chair will be changed from Valdez to Buchholz 12/7/2004. IEEE Editi
P1423/D12 approved as a new guded on 12/6/2001. Standard is good for 5 years from the date of publication
Current guide is good untill the expiration date of PAR (for revision)
Declined transfer to Substation Committee 4/16/2003. Standard Reaffirmed 6/13/2002, good for 5 years. Revision in progress
Extension granted. PAR approved 1/30/2000 P1234D11 balloted 2001. To many negative ballots. Hans is working on them. 1
IEEE 400-1991 will become P400.1 with a name change covering both high and low voltage instead of just high voltage. Told N
T&D PAR to be transferred to ICC. ICC Chare is Dave Donovan
Document Being Revised. Old PAR is withdran. New PAR for revision good through December 2006. Coordinate with Dan W
Coordinate w/Dan Ward 804 775 5328, T&D Committee
March 14, 2006 - Fulcomer - in comment resolution
August 26, 2006 Request Extension
March 14, 2006 - Bucholtz - in comment resolution
August 26, 2006 - Comment Resolution - Request an Extension
732-562-6003 or by email at firstname.lastname@example.org.
In progress email@example.com. Milan hopes to receive the PAR soon (3/9/06).
Extension requested. Final action on the above PAR will be taken at the 30 March 2006 Standards Board
meeting. You will receive written notification of the action taken.
October 18, 2006. Matt called. Said we need to reballot due to length of time th
Final action on the above PAR will be taken at the 14 September 2006 Standards Board meeting. You will receive written notifi
October 20, 2006. Joe Snow - will finalize with the WG and submitt to IEEE for technical review then, initiate the balloting proce
August 26, 2006 - Balloting opened August 16th and will close September 15th.
August 26, 2006 - Comment Resolution, Request for an extension
u will receive written notification of the action taken.
initiate the balloting process.
Count of Status Count of Status
Year of Next Action Total Status Total
2006 2 Inactive 26
2007 12 Active 19
2008 6 Requested Extension 8
2009 9 Approved 7
2010 4 Reaffirmed 3
2011 6 ??? 1
Confirm Status 3 Balloting 1
Expired 23 Modified Par Approved 1
(blank) 1 Grand Total 66
Grand Total 66
ICC Sponsored IEEE Standards and PAR Projects
Original Publication Status
Publication Expiration Standards have a 5-year life span
Project Date Date PAR Expiration Date Sub Working Group # Chairman E-mail Abbreviated Title PARs - 4-year
Szaniszio Reaffirmation of IEEE 1235 was approved by the IEEE-SA Standards Board on 15 September 2006
1235 2000 September 15, 2011 A A05W Walcott firstname.lastname@example.org Standard Test Methods for Identifying URD Cable Jackets and/or conduits and is valid for 5 years.
Paul J.Caronia Paul J.Caronia Guide for Selecting and Testing Jackets for Power, Instrumentation and IEEE 532 was approved as a revision standard by the IEEE-SA Standards Board on 27 September
532 1993 December 31, 2012 A A07W Eric Marsden Eric.Marsden@BorealisGroup.com Control Cables 2007and is good for 5 years
1210 1996 September 9, 2009 December 31, 2009 A A08W Weitz email@example.com Test for Determining Compatibility for Cable Lubricants with Wire and Cable Affirmative Revision Guide Approved 9/22/2004. Needs to be re-affirmed again.
Transferred to SubStation
1125 1993 June 1, 2005 Committee C A09W Cooper firstname.lastname@example.org Guide for Moisture Measurement & Handling in CGIT Transferred to Substation Committee 4/16/2003.
Joe Snow email@example.com Guide for the Selection, Testing, Application and Installation of Cables A two year extension has been granted until the end of 2009. Document is in ballot process as of July
1142 1995 December 31, 2009 A A11W Ajit Hiranandania firstname.lastname@example.org Utilizing Radial and/or Longitudinal Moisture Barriers 2009. https://development.standards.ieee.org/get-file/P1142.pdf?t=26466200024
John Densley Guide for Accelerated Aging Tests for Medium Voltage Extruded Electric IEEE 1407 was approved as a revision standard by the IEEE-SA Standards Board on 5 December
1407 2007 December 31, 2012 A A13W Walton email@example.com Power Cables Using Water Filled Tanks 2007 and is valid for 5 years
635 1994 July 1, 2009 December 31, 2009 A A15W Ken Bow firstname.lastname@example.org Guide for Selection & Design of Aluminum Sheaths for Power Cables Re-affirmation ballot taken. WG is resolving comments as of Email dated July 2, 2009.
P1728 NEW NEW A A17W Timothy J. Person email@example.com Guide for the Use of Extruded Shields PAR has not yet approved. Has one been submitted???
On 27 Mar 2008 the IEEE-SA Standards Board approved the above referenced project until 31 Dec
2012. A copy of the file can be found on our website at https://development.standards.ieee.org/get-
Guide for the Application of Extruded Conductor and Insulation Shields for file/P1781.pdf?t=21212000024. https://development.standards.ieee.org/get-
P1781 NEW NEW December 31, 2012 A A17W Timothy J. Person firstname.lastname@example.org Shielded Power Cables Rated 5 kV to 500 kV AC file/P1781.pdf?t=21212000024
A A18W Roy Jazowski email@example.com Guide for Investigating and Analyzing Power Cable, Joint, and Termination
1511 2004 May 12, 2009 December 31, 2009 B B12W Tom Champion firstname.lastname@example.org Failures on Systems Rated 5kV through 46kV IEEE 1511 approved 5/12/2004. good until 5/1/2009
A A18W Roy Jazowski Working group is developing PAR for daughter standard.
1511.1 NEW December 31, 2010 B B12W Jasek email@example.com http://standards.ieee.org/board/nes/projects/1511-1.pdf
Standard for Test Procedures and Requirements for Alternating Current On 17 June 2009 the IEEE-SA Standards Board approved the above referenced project until 30 June
Cable Terminations Used on Shielded Cables Having Laminated Insulation 2014. A copy of the file can be found on our website at https://development.standards.ieee.org/get-
Jim Braun Rated 2.5 kV Through 765 kV or Extruded Insulation Rated 2.5 kV Through file/P48.pdf?t=22419700024.
48 1996 June 30, 2014 B B01W Bill Taylor firstname.lastname@example.org 500 kV
Luzzi Standard for Extruded and Laminated Dielectric Shielded cable joints rated P404 was approved as a revision standard by the IEEE-SA Standards Board on 6 December 2006 and
404 2000 December 6, 2011 B B02W Frank DiGuglieimo email@example.com 2500 to 500kV is valid for five years.
Mike Malia Standard for Exposed Semi-conducting shields on HV Cable joints and P592 was approved as a revision standard by the IEEE-SA Standards Board on 5 December 2007 and
592 1996 December 31, 2012 B B03W Benn seperable insulated connections is valid for 5 years
Test Methods for Determination of Compatibility of Materials with Conductive
1026 1995 Withdrawn Inactive B B04W Gear Polymeric Insulation Shield and Jackets Standard withdrawn 01-01 IEEE will not reaffirm, new PAR needed for revision.
Milan Uzelac On 16 March 2006 the IEEE-SA Standards Board approved the project until 31 December 2010.
1300 1996 December 31, 2010 B B05W Frentzas firstname.lastname@example.org Guide for Cable Connections for Gas Insulated Substations http://standards.ieee.org/board/nes/projects/1300.pdf
DuPont November 2007. In ballot. On 5 Dec 2007 the IEEE-SA Standards Board approved the extension
1299 Makal Guide for the Connection of Surge Arresters to Protect Insulated Shielded request until 31 Dec 2008. https://development.standards.ieee.org/get-file/P1299.pdf?t=18354400024
ANSI C62.22.1) 1996 September 1, 2008 December 31, 2009 B B06W Kennedy email@example.com Electric Power Cable Systems
Phil Cox Walker, Mike Standard for Connectors Used in Underground Cable Splices and Project will expire in 2008. Will request an extension. WG to address document conflicts with ANSI
1659 December 1, 2008 December 31, 2009 B B08W Mike Walker [firstname.lastname@example.org] Terminations of Primary Network systems C119.4. http://standards.ieee.org/board/nes/projects/1659.pdf
1508 Withdrawn Inactive B B08W Cox email@example.com Standard for Solder Sweated Split Tinned Copper Connectors 5kV-35kV. PAR administratively withdrawn 12/10/2003
Guide for Evaluation of Solvents Used for Cleaning Electrical Cables and IEEE 1493 was approved as a new guide by the IEEE-SA Standards Board on 6 December 2006 and
1493 December 31, 2011 B B09W Rick Hartlien firstname.lastname@example.org Accessories is valid for five years.
1637 December 31, 2008 December 31, 2009 B B10W Bill Taylor email@example.com Guide to Select Terminations for Shielded Power Cables 5-46kV Negative ballots being addressed by WG. http://standards.ieee.org/board/nes/projects/1637.pdf
B16W Kennedy Standard for Separable Insulated Connector Systems for Power Distribution P386 was approved as a revision standard by the IEEE-SA Standards Board on 15 September 2006
386 September 15, 2011 B T&D Kumar firstname.lastname@example.org Systems Above 600V and is valid for five years
Donovan Guide for Application of Faulted Circuit Indicators for 200A, Single Phase Reaffirmation of 1216-2000 was approved by the IEEE-SA Standards Board on 15 September 2006
1216 September 15, 2011 B B17W Angerer email@example.com URD and is valid for five years.
P495 was approved as a revision standard by the IEEE-SA Standards Board on 27 September 2007
495 December 31, 2012 B B17W D. Donovan firstname.lastname@example.org Guide for Testing Faulted Circuit Indicators and is good for 5 years.
John Banting Draft Guide for the Application of Faulted Circuit Indicators for 200 / 600 A, November 2007. Responsibility to be transferred from IEEE T&D to the ICC. This is in the REVCOM
1610 Inactive Transferred to T & D B17W Dave Conocan email@example.com Three-Phase Underground Distribution December 2007 agenda and was approved for transfer.
Working Group will reaffirm in 2008. On 30 Jan 2009 the IEEE-SA Standards Board approved the
above referenced project until 31 Dec 2012. A copy of the file can be found on our website at
Harry Hayes https://development.standards.ieee.org/get-file/P1215.pdf?t=29930100024.
1215 December 1, 2007 December 31, 2012 B B18W Jankowich firstname.lastname@example.org Guide for Application fo Seperable Connections in the Electric Power Industry https://development.standards.ieee.org/get-file/P1215.pdf?t=29930100024
7/1/2011 12 of 12 41803712-2fdb-4c50-af0b-452cd5589a8d.xls
ICC Sponsored IEEE Standards and PAR Projects
Ernst 835-1994 (R2000) was approved by the IEEE-SA Standards Board on 8 June 2006 and is valid for five
835 2000 June 1, 2011 C C01W Purnhagen email@example.com IEEE Standard Power Cable Ampacity Tables years
On 5 Dec 2007 the IEEE-SA Standards Board approved the above referenced project until 31 Dec
2011. A copy of the file can be found on our website at https://development.standards.ieee.org/get-
Buckweitz file/P575.pdf?t=18350800024. https://development.standards.ieee.org/get-
575 December 6, 2011 C C02W Tom Champion firstname.lastname@example.org Guide for Application of Sheath Bonding file/P575.pdf?t=19741300024
Guide for the Evaluation of the Remaining Life of Impregnated Paper Reaffirmation of 1425-2001 was approved by the IEEE-SA Standards Board on
1425 2001 December, 2012 C C04W Zimnoch email@example.com Insulated Transmission Cable Systems 27 September 2007 and is good for 5 years
1406 1998 December 1, 2009 December 31, 2009 C C05W Floberg jengelhardt@USI-Power.com Guide to the Use of Gas-in-Fluid Analysis for Electric Power Cable Systems REVCOM approved 12/7/2004
Bascom Guide for Testing Transmission Cable Systems with Extruded Instulation, Allow to expire. Rusty Bascom, new chair will develop same gude but voltage will be extended to
1539 PAR EXPIRED C C8W Kroese firstname.lastname@example.org Part 1, 69kV through 150kV 500kV
Guide for the Design and Installation of Submarine Power & Communication
1120 1990 December 1, 2009 December 31, 2009 C C11W Neal Parker email@example.com Cables Guide approved 9/23/2004 and is valid for 5 years
On 19 May 2008 the IEEE-SA Standards Board approved the above referenced project until 31 Dec
2009. A copy of the file can be found on our website at https://development.standards.ieee.org/get-
P971 NEW December 31, 2009 C C12W Rios Guide for Distribution Cable Installation Methods in Duct Systems
1333 2000 Withdrawn Inactive C C13W Williams firstname.lastname@example.org Guide for Installation of T&D Cable Circuits Using Guided Horizontal Drilling Administratively Withdrawn - December 2005
February 2008. Extension approved through 2008. WG is currently resolving comments from re-
affirmation ballot which closed on Dec 28, 2008. An errata may be required to correct a publication
82 1994 September 1, 2007 C C14W Buchholz email@example.com Test Procedure for Impulse Test on Insulated Conductors error in one of the figures.
1254 PAR EXPIRED C C20W Campbell firstname.lastname@example.org Guide for the Measurement and Use of Soil Thermal Stability Data PAR dead 12/7/2004
P1234 was approved as a new guide by the IEEE-SA Standards Board on 17 May 2007 and is good
1234 December, 2012 C C21W Havercamp email@example.com Guide for Fault Locating on Shielded Power Cables Systems for 5 years
Johnson Guide for Planning & Designing Transition Facilities Between Overhead &
P1793 NEW NEW December 31, 2012 C C23W Rios Underground Transmission Lines https://development.standards.ieee.org/get-file/P1793.pdf?t=28127800024
The PAR for P1718 - PAR for a New Standard has been received by the IEEE Standards Office.
Chaaban Mohamed Submittal ID Number: 203543304_6995_095505.
P1718 NEW NEW December 31, 2012 C C24W Grodzinski firstname.lastname@example.org Guide for Temperature Monitoring of Cable Systems http://standards.ieee.org/board/nes/projects/1718.pdf
442 1996 March 1, 2008 C C25W Martin IEEE Guide for Soil Thermal Resistivity Measurements Reaffirmed March 20, 2003. Guide good through 2008
Al Kong Guideline For Working Procedures On Underground Transmission Circuits ON 27 September 2007 the IEEE-SA Standards Board approved the above referenced project until 31
P1727 NEW NEW December 31, 2011 C C29W Argaut AxK6@pge.com With Induced Voltage December 2011 http://standards.ieee.org/board/nes/projects/1727.pdf
Ken Bow email@example.com This is a IAS/ICIC PAR with ICC as a liaison reaffirmation ballot completed 3/3/2005, PAR for revision
1242 December 1, 2011 D D03W Art Maldonado firstname.lastname@example.org Guide for Selecting & Specifying Cables for Petrochemical Plants to be developed
John Merando email@example.com On 16 March 2006 the IEEE-SA Standards Board approved the project until 31 December 2008.
1185 1994 June 1, 2005 December 31, 2010 D D05W Steve Graham firstname.lastname@example.org Guide for Installation Methods for Generating Station Cables https://development.standards.ieee.org/get-file/P1185.pdf?t=29194000024
White Guide for Installation Methods for Fiber Optic Cables in Electric Power
1428 November 1, 2009 December 31, 2009 D D06W Brown Generating Stations and in Industrial Facilities New Standard approved 11/15/2004 for five years
Ken Hancock Recommended Practices for the Evaluation of Installed Cable Systems for
P1186 N/A Withdrawn Inactive D D7 LaMarca Class IE Circuits in Nuclear Power Generating Stations Last PAR Estension granted until 12/1/2003. PAR withdrawn per WG Chair Ken Hancock
634 November 1, 2009 December 31, 2009 D D08W Goesbeck Cable Penetration Fire Stop Qualification Test Revision standard approved 11-15-2004 for 5 years
D10W R. Konnik Robert.Konnik@R-SCC.com Standard for Qualifying Class 1E Electric Cables and Field Splices for Standard approved December 2003. Joint between NPEC (SC2) and ICC. NPEC has initated re-
383 1974 January 1, 2008 D NPEC A. Gwal email@example.com Nuclear Power Generating Stations affirmation ballot.
Ken Bow firstname.lastname@example.org On 6 March 2006 the IEEE-SA Standards Board approved the project until 31 December 2010.
1143 1994 December 1, 2010 D D11W Mick Bayer email@example.com Guide for Shielding Practice for Low Voltage Cables http://standards.ieee.org/board/nes/projects/1143.pdf
Ajit Gwal firstname.lastname@example.org Standard Procedure for the Determination of the Ampacity Derating Factors On 16 March 2006 the IEEE-SA Standards Board approved the project until 31 December 2010.
848 1996 December 31, 2010 D D13W Bert Spear Albert.Spear@duke-energy.com of Fire Protected Cables http://standards.ieee.org/board/nes/projects/848.pdf
On 19 Jan 2009 the IEEE-SA Standards Board approved the project PAR until 31 December 2012.
Gary Engmann gary engmann [email@example.com] Guide for the Design of Cable and Raceway Systems for Electric Generating This is a joint PAR with PGC. https://development.standards.ieee.org/get-
P422 December 31, 2012 D D14W John Merando firstname.lastname@example.org Stations file/P422.pdf?t=29927400024
John Merando email@example.com P1202 was approved as a revision standard by the IEEE-SA Standards Board on 8 June 2006 and is
1202 June 17, 2011 D D15W Tim Clancy firstname.lastname@example.org Standard for Flame Propagation Testig of Wire and Cable valid for five years.
IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical
Jan Pirrong email@example.com Fiber Splices for Use in Safety Systems of Nuclear Power Generating
P1682 NEW NEW December 31, 2009 D D16W Kofi Korash Korsah, Kofi [firstname.lastname@example.org] Stations This is a PE/NPE PAR. Co-sponsored by ICC http://standards.ieee.org/board/nes/projects/1682.pdf
Arturo Maldonado Standard For Testing Circuit Integrity Cables Using the Hydrocarbon Pool The Working Group was created on January 26, 2007 to develop new standard.
P1717 NEW NEW December 31, 2012 D D17W Don Smith email@example.com Fire Test Protocol http://standards.ieee.org/board/nes/projects/1717.pdf
On 5 Dec 2007 the IEEE-SA Standards Board approved the project until 31 Dec
Wen Guide for Field Testing and Evaluation of the Insulation of Shielded Power 2011 https://development.standards.ieee.org/get-file/P400.pdf?t=18350200024
400 2001 December, 2011 F F01W Cote Cable Systems (Ominibus) 400
7/1/2011 13 of 13 41803712-2fdb-4c50-af0b-452cd5589a8d.xls
ICC Sponsored IEEE Standards and PAR Projects
Larzelere firstname.lastname@example.org Guide for Field Testing of Laminated Dielectric, Shielded Power Cable P400.1 was approved as a revision guide by the IEEE-SA Standards Board on March 22, 2007 for five
400.1 2007 December, 2012 C F02W Buchholz email@example.com Systems reated 5kV and above with High Direct Current Voltage years.
New Guide approved September 23, 2004. Valid through September 2009. On 11 May 2009 the IEEE-
SA Standards Board approved the above referenced project until 31 Dec 2013. A copy of the file can
John Densley be found on our website at https://development.standards.ieee.org/get-file/P400.2.pdf?t=33299200024.
400.2 2004 December 31, 2013 F F03W Schlessinger firstname.lastname@example.org Very Low Frequency Testing in the Field 400.2 https://development.standards.ieee.org/get-file/P400.2.pdf?t=33299200024
Mashikian email@example.com Guide for Partial Discharge Testing of shielded Power Cable Systems in P400.3 was approved as a new guide by the IEEE-SA Standards Board on 15 September 2006 and is
P400.3 2006 September 15, 2011 F F04W Beane firstname.lastname@example.org Field Environment valid for five years
Guide for Detection, Mitigation and Control of Concentric Neutral Corrosion in P1617 was approved as a new standard by the IEEE-SA Standards Board on 27 September 2007 and
1617 2007 December, 2012 C F07W Vern Buchholz email@example.com Medium Voltage Underground Cables is good for 5 years.
Charlie VonHermann IEEE Guide for Making High Direct-Voltage Test on Power Cable Systems in
400 1991 Withdrawn Inactive 12-22 Jim Medek the Field To be replaced by 400.1 and administratively withdrawn
Jim Medek Diagnostic & Classification of Cable, Joint & Termination Troubles on
1197 Withdrawn Inactive 10-43 Bill Black Extruded Dielectric Cables PAR withdrawn 3/16/1995
402 1982 Withdrawn Inactive Measuring Resistivity of Cable Insulation at High Direct Voltages
646 1976 Withdrawn Inactive PAR withdrawn 9-18-1986
737 Withdrawn Inactive Gorur/Hervig Guide to Testing for Weathering of Polymeric Cable Accessories PAR withdrawn 3-16-95
816 1987 Withdrawn Inactive Doepken Test for Smoke Toxicity & Corrosive Products of Cable Accessories PAR withdrawn 3-18-1993
817 1993 Withdrawn Inactive Tuzinski Test Proceedures for Flame Retardant Coatings Applied to Insulated Cable Project expired 1/1/2000
972 1985 Withdrawn Inactive Guide for connection of insulated Al conductors PAR withdrawn 6/27/1991
1034 Withdrawn Inactive Doepken Fire & Smoke Test Procedure for Electrical Cables PAR withdrawn 3/16/1995
Test Procedure for Measuring the Resistance of Semi-Conducting Jackets on
1047 Withdrawn Inactive Underground Distribution Cable PAR withdrawn 3/16/1995
Guide for Testing the Insulation of Shielded Power Cable Systems in the
1343 Withdrawn Inactive Thue Field
1429 Withdrawn Inactive Recommended Practice for Electrical Systems in Cleanrooms Recommendation: Extend until December 2007
851 Withdrawn Inactive Resuali Application of Flame retardant coatings and tapes Withdrawn PAR
7/1/2011 14 of 14 41803712-2fdb-4c50-af0b-452cd5589a8d.xls