Ieee Guide for the Application of Sheath Bonding - Excel by zdi16487

VIEWS: 99 PAGES: 3

Ieee Guide for the Application of Sheath Bonding document sample

More Info
									                                                                                                                                           ICC Sponsored IEEE Standards and PAR Projects



                           Original           Publication                                                                                                                                                                                                                                                  Status
                          Publication         Expiration                                                                                                                                                                                                                                       Standards have a 5-year life span
        Project              Date                Date           PAR Expiration Date      Sub   Working Group #         Chairman                            E-mail                                           Abbreviated Title                                                                         PARs - 4-year life

  SUBCOMMITTEE A                                                                                                        Al Kong      AXK6@PGE.com
 Al Kong /Mark Walton                                                                                                 Mark Walton    mwalton@generalcable.com
                                                                                                                 Szaniszio                                                                                                                                    Reaffirmation of IEEE 1235 was approved by the IEEE-SA Standards Board on 15 September 2006
           1235              2000       September 15, 2011                                A        A05W          Walcott             steveszan@ca.inter.net                  Standard Test Methods for Identifying URD Cable Jackets and/or conduits          and is valid for 5 years.
                                                                                                                 Paul J.Caronia      Paul J.Caronia;                         Guide for Selecting and Testing Jackets for Power, Instrumentation and           IEEE 532 was approved as a revision standard by the IEEE-SA Standards Board on 27 September
           532               1993       December 31, 2012                                 A        A07W          Eric Marsden        Eric.Marsden@BorealisGroup.com          Control Cables                                                                   2007and is good for 5 years
                                                                                                                 John Fee
           1210              1996       September 9, 2009    December 31, 2009            A        A08W          Joe McAulife        jfee@polywater.com                      Test for Determining Compatibility for Cable Lubricants with Wire and Cable      Affirmative Revision Guide Approved 9/22/2004. Needs to be re-affirmed again.

                                                             Transferred to SubStation
           1125              1993       June 1, 2005         Committee                    C        A09W          Cooper              j.h.cooper@ieeee.org                    Guide for Moisture Measurement & Handling in CGIT                                Transferred to Substation Committee 4/16/2003.
                                                                                                                 Joe Snow            jsnow@snowbuilding.com;                 Guide for the Selection, Testing, Application and Installation of Cables
           1142              1995       December 31, 2014                                 A        A11W          Ajit Hiranandania   akhirana@bechtel.com                    Utilizing Radial and/or Longitudinal Moisture Barriers                           Re-affirmation was approved by SA Standards Board on 12/9/2009
                                                                                                                 John Densley                                                Guide for Accelerated Aging Tests for Medium Voltage Extruded Electric           IEEE 1407 was approved as a revision standard by the IEEE-SA Standards Board on 5 December
           1407              2007       December 31, 2012                                 A        A13W          Walton              j.densley@ieee.org                      Power Cables Using Water Filled Tanks                                            2007 and is valid for 5 years
           635               1994       December 31, 2014                                 A        A15W          Ken Bow             kblecnslt@consultant.com                Guide for Selection & Design of Aluminum Sheaths for Power Cables                Reaffirmation approved by SA Standards Board on Dec 9, 2009.
         P1728               NEW        NEW                                              A                       Timothy J. Person   persontj@dow.com                        Guide for the Use of Extruded Shields                                            PAR has been not approved. Has one been submitted???
                                                                                                                                                                                                                                                              On 27 Mar 2008 the IEEE-SA Standards Board approved the above referenced project until 31 Dec
                                                                                                                 Serge Pelissou                                              Guide for the Application of Extruded Conductor and Insulation Shields for       2012. A copy of the file can be found on our website at https://development.standards.ieee.org/get-
         P1781               NEW        NEW                  December 31, 2012           A         A17W          Timothy J. Person   persontj@dow.com                        Shielded Power Cables Rated 5 kV to 500 kV AC                                    file/P1781.pdf?t=21212000024
                                                                                         A         A18W          Roy Jazowski        rjazowski@teledyne.com                  Guide for Investigating and Analyzing Power Cable, Joint, and Termination
           1511              2004       May 12, 2009         December 31, 2009           B         B12W          Tom Champion        Thomas.Champion@neetrac.gatech.edu      Failures on Systems Rated 5kV through 46kV                                       IEEE 1511 approved 5/12/2004. good until 5/1/2009
                                                                                         A         A18W          Roy Jazowski        rjazowski@homac.com;                    Guide for Investigating and Analyzing Shielded Power Cable Failures on           PAR extension granted on 11/2/2009 until 12/31/2010.
         1511.1              NEW        NEW                  December 31, 2010           B         B12W          Margaret Jasek      rjazowski@odi.com                       Systems Rated 5 kV Through 46 kV                                                 http://standards.ieee.org/board/nes/projects/1511-1.pdf
  SUBCOMMITTEE B
 Harry Yaworski / Kraig                                                                                                              hyaworsk@tycoelectronics.com
         Bader                                                                                                   Harry Yaworski      kbader@fcgov.com
                                                                                                                                                                             Standard for Test Procedures and Requirements for Alternating Current
                                                                                                                                                                             Cable Terminations Used on Shielded Cables Having Laminated Insulation           On 17 June 2009 the IEEE-SA Standards Board approved the above referenced project until 30 June
                                                                                                                 Jim Braun                                                   Rated 2.5 kV Through 765 kV or Extruded Insulation Rated 2.5 kV Through          2014. A copy of the file can be found on our website at https://development.standards.ieee.org/get-
           48                1996       June 30, 2014                                     B        B01W          Bill Taylor         jimbr@connexusenergy.com                500 kV                                                                           file/P48.pdf?t=22419700024
                                                                                                                                                                                                                                                          P404 was approved as a revision standard by the IEEE-SA Standards Board on 6 December 2006 and
                                                                                                                                                                                                                                                          is valid for five years. On 5 Feb 2010 the IEEE-SA Standards Board approved P404 Project until 31
                                                                                                                 Glen Luzzi          g.luzzi@ieee.org                        Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated Dec 2014. A copy of the file can be found on our website at
           404               2000       December 6, 2011     December 31, 2014            B        B02W          Saleman Alibhay                                             2500 to 500 kV                                                               https://development.standards.ieee.org/get-file/P404.pdf?t=43585700024
                                                                                                                 Mike Malia                                                  Standard for Exposed Semi-conducting shields on HV Cable joints and          P592 was approved as a revision standard by the IEEE-SA Standards Board on 5 December 2007 and
           592               1996       December 31, 2012                                 B        B03W          Benn                                                        seperable insulated connections                                              is valid for 5 years
                                                                                                                                                                             Test Methods for Determination of Compatibility of Materials with Conductive
           1026              1995       Withdrawn            Inactive                     B        B04W          Bob Gear                                                    Polymeric Insulation Shield and Jackets                                      Standard withdrawn 01-01 IEEE will not reaffirm, new PAR needed for revision.
                                                                                                                 Milan Uzelac                                                                                                                             On 16 March 2006 the IEEE-SA Standards Board approved the project until 31 December 2010.
           1300              1996       December 31, 2010                                 B        B05W          Frank Frentzas      muzelac@gwelec.com                      Guide for Cable Connections for Gas Insulated Substations                    http://standards.ieee.org/board/nes/projects/1300.pdf


        1299                                                                                                     Farris Jibril       jibril@WestarEnergy.com                 Guide for the Connection of Surge Arresters to Protect Insulated Shielded        On 9 Dec 2009 the IEEE-SA Standards Board approved the extension request until 31 Dec 2010.
    ANSI C62.22.1)           1996       September 1, 2008    December 31, 2010            B        B06W          John Makal          john.makal@CooperIndustries.com         Electric Power Cable Systems                                                     https://development.standards.ieee.org/get-file/P1299.pdf?t=18354400024
                                                                                                                                     pcox@mlgw.org;
                                                                                                                 Phil Cox            mike.walker@tycoelectronics.com;        Standard for Connectors Used in Underground Cable Splices and                    On June 17, 2010 SA Standards Board aqpproved PAR extension until 12/31/2010. WG to address
           1659                         December 1, 2008     December 31, 2010            B        B08W          Mike Walker         m.l.walker@ieee.org                     Terminations of Primary Network systems                                          document conflicts with ANSI C119.4. http://standards.ieee.org/board/nes/projects/1659.pdf
                                                                                                                 Havercamp
           1508                         Withdrawn            Inactive                     B        B08W          Cox                 w.b.haverkamp@ieee.org                  Standard for Solder Sweated Split Tinned Copper Connectors 5kV-35kV.             PAR administratively withdrawn 12/10/2003
                                                                                                                                                                             Guide for Evaluation of Solvents Used for Cleaning Electrical Cables and         IEEE 1493 was approved as a new guide by the IEEE-SA Standards Board on 6 December 2006 and
           1493                         December 31, 2011                                 B        B09W          Rick Hartlien       r.hartlein@ieee.org                     Accessories                                                                      is valid for five years.

                                                                                                                 Bob Fulcomer                                                                                                                                 Negative ballots being addressed by WG. On 9 Dec 2009 the IEEE-SA Standards Board approved the
           1637                         December 31, 2008    December 31, 2010            B        B10W          Bill Taylor
                                                                                                                 Wall                bfulcomer@plymouthrubber.com            Guide to Select Terminations for Shielded Power Cables 5-46kV                    extension request until 31 Dec 2010. http://standards.ieee.org/board/nes/projects/1637.pdf
                                                                                                                 Wetzel
                                                                                                   B16W          Kennedy                                                     Standard for Separable Insulated Connector Systems for Power Distribution        P386 was approved as a revision standard by the IEEE-SA Standards Board on 15 September 2006
           386                          September 15, 2011                                B                      Kumar               fstepniak62@comcast.net                 Systems Above 600V                                                               and is valid for five years
                                                                                                                 Dave Donovan                                                Guide for Application of Faulted Circuit Indicators for 200A, Single Phase       Reaffirmation of 1216-2000 was approved by the IEEE-SA Standards Board on 15 September 2006
           1216                         September 15, 2011                                B        B17W          Angerer             dave.donovan@joslynhv.com               URD                                                                              and is valid for five years.
                                                                                                                                                                                                                                                              P495 was approved as a revision standard by the IEEE-SA Standards Board on 27 September 2007
           495                          December 31, 2012                                 B        B17W          Dave Donovan        dave.donovan@joslynhv.com               Guide for Testing Faulted Circuit Indicators                                     and is good for 5 years.
                                                                                                                 John Banting                                                Draft Guide for the Application of Faulted Circuit Indicators for 200 / 600 A,   November 2007. Responsibility transferred from IEEE T&D to the ICC per REVCOM December 2007
           1610                         Inactive             Transferred to T & D                  B17W          Dave Conocan        jbanting@cooperpower.com                Three-Phase Underground Distribution                                             meeting.

                                                                                                                                                                                                                                                           On 30 Jan 2009 the IEEE-SA Standards Board approved the above referenced project until 31 Dec
                                                                                                                 Harry Hayes                                                                                                                               2012. A copy of the file can be found on our website at https://development.standards.ieee.org/get-
           1215                         December 1, 2007     December 31, 2012            B        B18W          Jankowich           hhayes@ameren.com                       Guide for Application fo Seperable Connections in the Electric Power Industry file/P1215.pdf?t=29930100024




7/1/2011                                                                                                                                                            1 of 1                                                                                                                                     22595a13-ba6e-4ce0-a4fa-1358a598446f.xls
                                                                                                             ICC Sponsored IEEE Standards and PAR Projects




                                                                                                                                                                                                                                   On 5 Feb 2010 the IEEE-SA Standards Board approved P1816 project until 31 Dec 2014.         A copy of
                                                                                  David Crotty          DECrotty@hps.hubbell.com                   Guide for the Preparation of Extruded Dielectric, Shielded Cables Rated 2.5     the file can be found on our website at https://development.standards.ieee.org/get-
           1816         New    New                 December 31, 2014   B   B19W   Michael Smalley       michael.smalley@we-energies.com            kV through 46 kV for Installation of Cable Accessories                          file/P1816.pdf?t=43582500024
  SUBCOMMITTEE C
  Henk Geene / Frank                                                              Henk Geene / Frank    henk.geene@prysmian.com
       Frentzas                                                                   Frentzas              frank.frentzas@comed.com
                                                                                  Ernst                 ternst@usi-power.com                                                                                                       835-1994 (R2000) was approved by the IEEE-SA Standards Board on 8 June 2006 and is valid for five
           835          2000   June 1, 2011                            C   C01W   Dave Purnhagen        dpurnhagen@Usi-power.com                   IEEE Standard Power Cable Ampacity Tables                                       years
                                                                                                                                                                                                                                   On 5 Dec 2007 the IEEE-SA Standards Board approved the above referenced project until 31 Dec
                                                                                  Vern Buchholz                                                                                                                                    2011. A copy of the file can be found on our website. https://development.standards.ieee.org/get-
           575                 December 6, 2011                        C   C02W   Tom Champion          vern.buchholz@ieee.org                     Guide for Application of Sheath Bonding                                         file/P575.pdf?t=19741300024
                                                                                                                                                   Guide for the Evaluation of the Remaining Life of Impregnated Paper             Reaffirmation of 1425-2001 was approved by the IEEE-SA Standards Board on
           1425         2001   December 31, 2012                       C   C04W   Joe Zimnoch           joezimnoch@aol.com                         Insulated Transmission Cable Systems                                            27 September 2007 and is good for 5 years

           1406         1998   December 1, 2009    December 31, 2009   C   C05W   Dave Purnhagen        dpurnhagen@USI-Power.com                   Guide to the Use of Gas-in-Fluid Analysis for Electric Power Cable Systems      REVCOM approved 12/7/2004
                                                                                  Rusty Bascom                                                     Guide for Testing Transmission Cable Systems with Extruded Instulation,         Allow to expire. Rusty Bascom, new chair will develop same gude but voltage will be extended to
           1539                                    PAR EXPIRED         C   C8W    Art Kroese            r.bascom@pdc-cables.com                    Part 1, 69kV through 150kV                                                      500kV
                                                                                                                                                   Guide for the Design and Installation of Submarine Power & Communication
           1120         1990   June 30, 2015                           C   C11W   Neal Parker           n.k.parker@ieee.org                        Cables                                                                          On June 17, 2010, IEEE SA Standards Board approved re-affirmation of standard for 5 years.
                                                                                                                                                                                                                                   On 9 Dec 2009 the IEEE-SA Standards Board approved the above referenced project until 31 Dec
                                                                                                                                                                                                                                   2011. A copy of the file can be found on our website at https://development.standards.ieee.org/get-
           P971         NEW                        December 31, 2011   C   C12W   Jon Erickson          JCErickson@semprautilities.com             Guide for Distribution Cable Installation Methods in Duct Systems               file/P971.pdf?t=22421700024
                                                                                  Stewart
           1333         2000   Withdrawn           Inactive            C   C13W   Williams              j.williams@pdc-cables.com                  Guide for Installation of T&D Cable Circuits Using Guided Horizontal Drilling   Administratively Withdrawn - December 2005
            82          1994   December 31, 2014                       C   C14W   Vern Buchholz         vern.buchholz@ieee.org                     Test Procedure for Impulse Voltage Test on Insulated Conductors                 On Dec 9, 2009, IEEE SA Stds Board re-affirmed document for 5 years.
           1254         NEW    NEW                 December 31, 2013   C   C20W   Parmar, Geeta         Geeta@geothermusa.com                      Guide for Soil Thermal Stability                                                On Dec 9, 2009, IEEE SA Stds Board approved the PAR for 4 years.
                                                                                                                                                                                                                                   P1234 was approved as a new guide by the IEEE-SA Standards Board on 17 May 2007 and is good
           1234                December 31, 2012                       C   C21W   Havercamp             w.b.haverkamp@ieee.org                     Guide for Fault Locating on Shielded Power Cables Systems                       for 5 years
                                                                                  Dennis Johnson                                                   Guide for Planning & Designing Transition Facilities Between Overhead &
        P1793           NEW    NEW                 December 31, 2012   C   C23W   Dave Campilli                                                    Underground Transmission Lines                                                  https://development.standards.ieee.org/get-file/P1793.pdf?t=28127800024
                                                                                                                                                                                                                                   The PAR for P1718 - PAR for a New Standard has been received by the IEEE Standards Office.
                                                                                  Chaaban Mohamed                                                                                                                                  Submittal ID Number: 203543304_6995_095505.
        P1718           NEW    NEW                 December 31, 2012   C   C24W   Grodzinski            chaaban.mohamed@ireq.ca                    Guide for Temperature Monitoring of Cable Systems                               http://standards.ieee.org/board/nes/projects/1718.pdf
                                                                                  Patel, Nimesh                                                                                                                                    On 5 Feb 2010 the IEEE-SA Standards Board approved P442 project until 31 Dec 2014. A copy of
                                                                                  Cherukupalli,         Nimesh@geothermusa.com;                                                                                                    the file can be found on our website at https://development.standards.ieee.org/get-
           442          1996   March 1, 2008       December 31, 2014   C   C25W   Sudhakar              Sudhakar.Cherukupalli@BCHydro.bc.ca        IEEE Guide for Soil Thermal Resistivity Measurements                            file/P442.pdf?t=43585900024
                                                                                  Al Kong                                                          Guideline For Working Procedures On Underground Transmission Circuits           ON 27 September 2007 the IEEE-SA Standards Board approved the above referenced project until 31
        P1727           NEW    NEW                 December 31, 2011   C   C29W   Pierre Argaut         AxK6@pge.com                               With Induced Voltage                                                            December 2011 http://standards.ieee.org/board/nes/projects/1727.pdf
  SUBCOMMITTEE D
  Robert Konnik / Art                                                             Robert Konnik / Art   Robert.Konnik@R-SCC.com;
     Maldonado                                                                    Maldonado             art@amtechnologygroup.com
                                                                                  Art Maldonado         art@amtechnologygroup.com                                                                                                  This is a IAS/ICIC PAR with ICC as a liaison reaffirmation ballot completed 3/3/2005, PAR for revision
           1242                December 1, 2011                        D   D03W   Ken Bow               kblecnslt@consultant.com;                  Guide for Selecting & Specifying Cables for Petrochemical Plants                to be developed
                                                                                  John Merando          jmerando@bechtel.com
           1185         1994   December 31, 2015   Revision Approved   D   D05W   Steve Graham          s.graham@ieee.org                          Guide for Installation Methods for Generating Station Cables                    On 20 October 2010 the IEEE-SA Standards Board approved the revised Standard until 2015.
                                                                                                                                                   Guide for Installation Methods for Fiber Optic Cables in Electric Power
           1428         2004   December 31, 2015   Re-affirmed         D   D06W                                                                    Generating Stations and in Industrial Facilities                                On October 20, 2010, IEEE SA Standards Board approved re-affirmation for 5 years.
                                                                                                                                                   Recommended Practices for the Evaluation of Installed Cable Systems for
        P1186           N/A    Withdrawn           Inactive            D   D07W                                                                    Class IE Circuits in Nuclear Power Generating Stations                          Last PAR Estension granted until 12/1/2003. PAR withdrawn by WG Chair Ken Hancock.

           634          2004   June 30, 2015       Re-affirmed         D   D08W                                                                    Cable Penetration Fire Stop Qualification Test                                  On June 17, 2010, IEEE SA Standards Board approved re-affirmation of standard for 5 years.
                                                                                  Robert Konnik         Robert.Konnik@R-SCC.com;                   Standard for Qualifying Class 1E Electric Cables and Field Splices for          Standard approved December 2003. Joint between NPEC (SC2) and ICC. NPEC has initated re-
           383          1974   January 1, 2008                         D   D10W   Ajit Gwal             ajitg@dnfsb.gov                            Nuclear Power Generating Stations                                               affirmation ballot.
                                                                                  Ken Bow               kblecnslt@consultant.com;                                                                                                  On 6 March 2006 the IEEE-SA Standards Board approved the project until 31 December 2010.
           1143         1994   December 31, 2010                       D   D11W   Mick Bayer            mgbayer@dow.com                            Guide for Shielding Practice for Low Voltage Cables                             http://standards.ieee.org/board/nes/projects/1143.pdf
                                                                                  Ajit Gwal             ajitg@dnfsb.gov;                           Standard Procedure for the Determination of the Ampacity Derating Factors       On 16 March 2006 the IEEE-SA Standards Board approved the project until 31 December 2010.
           848          1996   December 31, 2010                       D   D13W   Bert Spear            Albert.Spear@duke-energy.com               of Fire Protected Cables                                                        http://standards.ieee.org/board/nes/projects/848.pdf
                                                                                                                                                                                                                             On 19 Jan 2009 the IEEE-SA Standards Board approved the project PAR until 31 December 2012.
                                                                                                                                                   Guide for the Design of Cable and Raceway Systems for Electric Generating This is a joint PAR with PGC. https://development.standards.ieee.org/get-
           P422         NEW    NEW                 December 31, 2012   D   D14W   John Merando          jmerando@bechtel.com;                      Stations                                                                  file/P422.pdf?t=29927400024
                                                                                  Charles Hills                                                                                                                              P1202 was approved as a revision standard by the IEEE-SA Standards Board on 8 June 2006 and is
           1202         1991   June 17, 2011                           D   D15W                         chills@generalcable.com                    Standard for Flame Propagation Testig of Wire and Cable                   valid for five years.
                                                                                                                                                   IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical
                                                                                  Jan Pirrong           jpirrong@cablelan.com;                     Fiber Splices for Use in Safety Systems of Nuclear Power Generating
        P1682           NEW    NEW                 December 31, 2011   D   D16W   Kofi Korash           Korsah, Kofi [korsahk@ornl.gov]            Stations                                                                        This is a PE/NPE PAR. Co-sponsored by ICC http://standards.ieee.org/board/nes/projects/1682.pdf

                                                                                  Art Maldonado         art@amtechnologygroup.com                  Standard For Testing Circuit Integrity Cables Using the Hydrocarbon Pool        The Working Group was created on January 26, 2007 to develop new standard.
        P1717           NEW    NEW                 December 31, 2012   D   D17W   Don Smith             DSmith@houwire.com                         Fire Test Protocol                                                              http://standards.ieee.org/board/nes/projects/1717.pdf

                                                                                                                                                                                                                                   Joint standard with IAS/PCIC.
        P1810           NEW    NEW                 December 31, 2013   D   D17W   Gil Shoshani          gil.shoshani@r-scc.com                     Guide for Installation of Circuit Integrity Cables in Petrochemical Plants      On Nov 2, 2009, PAR was approved by SA Standards Board until 31 Dec 2013.




7/1/2011                                                                                                                                  2 of 2                                                                                                                                    22595a13-ba6e-4ce0-a4fa-1358a598446f.xls
                                                                                                          ICC Sponsored IEEE Standards and PAR Projects



  SUBCOMMITTEE F                                                                                    j.densley@ieee.org
    John Densley                                                               John Densley         Nigel.hampton@Neetrac.gatech.ed
   Nigel Hampton                                                               Nigel Hampton        u
                                                                               Wen, Yingli                                                  Guide for Field Testing and Evaluation of the Insulation of Shielded Power       On 5 Dec 2007 the IEEE-SA Standards Board approved the project until 31 Dec 2011
           400     2001   December, 2011                           F   F01W    Cote                 Wen, Yingli [WenY@coned.com]            Cable Systems (Ominibus) 400                                                     https://development.standards.ieee.org/get-file/P400.pdf?t=18350200024
                                                                               Larzelere            evergreen@ieee.org;                     Guide for Field Testing of Laminated Dielectric, Shielded Power Cable            P400.1 was approved as a revision guide by the IEEE-SA Standards Board on March 22, 2007 for five
           400.1   2007   December, 2012                           F   F02W    Buchholz             buchholz@ieee.org                       Systems reated 5kV and above with High Direct Current Voltage                    years.

                                                                                                                                                                                                                             New Guide approved September 23, 2004. Valid through September 2009. On 11 May 2009 the IEEE-
                                                                               John Densley                                                                                                                                  SA Standards Board approved the above referenced project until 31 Dec 2013. A copy of the file can
           400.2   2004   December 31, 2013                        F   F03W    Schlessinger, Rob    j.densley@ieee.org                      Very Low Frequency Testing in the Field 400.2                                    be found on our website at https://development.standards.ieee.org/get-file/P400.2.pdf?t=33299200024
                                                                               Leviar
                                                                               Walton
                                                                               Mashikian            mashikian@imcorptech.com;               Guide for Partial Discharge Testing of shielded Power Cable Systems in           P400.3 was approved as a new guide by the IEEE-SA Standards Board on 15 September 2006 and is
       P400.3      2006   September 15, 2011                       F   F04W    Beane                wim.boone@kema.com                      Field Environment                                                                valid for five years
                                                                                                                                                                                                                             On 25 Mar 2010 the IEEE-SA Standards Board approved the above referenced project until 31 Dec
                                                                                                                                            Guide for Field testing of Shielded Power Cable Systems Rated 5kV and            2014. A copy of the file can be found on our website at https://development.standards.ieee.org/get-
       P400.4      NEW    NEW                  December 31, 2014   F   F05W    Ed Gulski            e.gulski@tudelft.nl                     Above With Damped Alternating Current Voltage (DAC)                              file/P400.4.pdf?t=45400400024
                                                                                                                                            Guide for Detection, Mitigation and Control of Concentric Neutral Corrosion in   P1617 was approved as a new standard by the IEEE-SA Standards Board on 27 September 2007 and
           1617    2007   December, 2012                           F   F07W    Vern Buchholz        vernbuchholz@shaw.ca                    Medium Voltage Underground Cables                                                is good for 5 years.




                                                                               Charlie VonHermann                                           IEEE Guide for Making High Direct-Voltage Test on Power Cable Systems in
           400     1991   Withdrawn            Inactive                12-22   Jim Medek                                                    the Field                                                                To be replaced by 400.1 and administratively withdrawn
                                                                               Jim Medek                                                    Diagnostic & Classification of Cable, Joint & Termination Troubles on
           1197           Withdrawn            Inactive                10-43   Bill Black                                                   Extruded Dielectric Cables                                               PAR withdrawn 3/16/1995
           402     1982   Withdrawn            Inactive                                                                                     Measuring Resistivity of Cable Insulation at High Direct Voltages
           646     1976   Withdrawn            Inactive                                                                                                                                                                      PAR withdrawn 9-18-1986
           737            Withdrawn            Inactive                        Gorur/Hervig                                                 Guide to Testing for Weathering of Polymeric Cable Accessories                   PAR withdrawn 3-16-95
           816     1987   Withdrawn            Inactive                        Doepken                                                      Test for Smoke Toxicity & Corrosive Products of Cable Accessories                PAR withdrawn 3-18-1993

           817     1993   Withdrawn            Inactive                        Tuzinski                                                     Test Proceedures for Flame Retardant Coatings Applied to Insulated Cable         Project expired 1/1/2000
           972     1985   Withdrawn            Inactive                                                                                     Guide for connection of insulated Al conductors                                  PAR withdrawn 6/27/1991
           1034           Withdrawn            Inactive                        Doepken                                                      Fire & Smoke Test Procedure for Electrical Cables                         PAR withdrawn 3/16/1995
                                                                                                                                            Test Procedure for Measuring the Resistance of Semi-Conducting Jackets on
           1047           Withdrawn            Inactive                                                                                     Underground Distribution Cable                                            PAR withdrawn 3/16/1995
                                                                                                                                            Guide for Testing the Insulation of Shielded Power Cable Systems in the
           1343           Withdrawn            Inactive                        Bill Thue                                                    Field
           1429           Withdrawn            Inactive                                                                                     Recommended Practice for Electrical Systems in Cleanrooms                        Recommendation:      Extend until December 2007
           851            Withdrawn            Inactive                        Bob Resuali                                                  Application of Flame retardant coatings and tapes                                Withdrawn PAR




7/1/2011                                                                                                                           3 of 3                                                                                                                                    22595a13-ba6e-4ce0-a4fa-1358a598446f.xls

								
To top