Warning Labels Green Wizard LGG-1550G Laser Wizard LGG-1505R User Guide Please read these instructions carefully before use World-wide Headquarters: th 3000 North 29 Ct., Hollywood, Florida, USA 33020 Tel: +1-954-929-1115 Fax: +1-954-929-5560 www.ChauvetLighting.com Maintenance & Servicing At the Front: Laser Aperture At the Rear: 1. Power Input There is no maintenance required. Work on internal parts should be carried out by a qualified technician. 2. Power Switch Removal of any covers is considered a breach of warranty and will not be covered under any such Mounting Bracket 3. Audio Sensitivity Adjustment agreement unless authorized first by the company. 4. Mode Switch (Audio/Auto/Manual) Troubleshooting 5. Manual Pattern Selection If the unit is not functional – check that the main power supply is ‘on’ and DC jack is secure. If the unit is not functional – make sure if in audio mode there is music playing. If after trying this solution you still have a problem, contact your dealer or CHAUVET. 1 2 3 4 5 Fig 1 Contact CHAUVET USA Introduction Technical Assistance: 1-800-762-1084 (954) 929-1115 E-Mail email@example.com Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy many trouble free hours with this unit .To assist with the care and use of the product we have prepared Caution this short guide. No user serviceable parts, please refer to CHAUVET for service. Unit should be mounted in such a manner that the emitted beam will no strike people. Operation Power Connections This lighting effect has been designed to function on a DC power supply of 9V and has been supplied with a suitable power pack for use with your local voltage. Check the label on the unit and the power plug The unit is supplied with a power pack appropriate to its voltage and destination. It is imperative that the for the correct voltage. correct power pack suitable for this unit be used at all times. If any other type of supply is provide to this unit then it is likely to render the unit non-operational. When connected to the mains power supply via the power pack and switched on the unit should Caution: Use of controls or adjustments or performance of procedures other than as specified herein may illuminate and shoot a 4.9mW single laser (either green or red). result in hazardous radiation exposure! Warning: Do not aim towards eye. Technical Specifications This unit provides three modes of operation accessible via the functions switch (Fig 1). The three modes are as follows: Sound Activation, Auto Mode and Manual. In the sound and automatic modes, the laser Model Green Wizard Laser Wizard will change through sixteen preset patterns. In manual mode, the user can select the pattern and rotation Power Adapter DC 9V 800 mA speed. Laser Diode Green laser diode Red laser diode Great with fog. Wavelength 532 nm 650nm Installation / Mounting Dimensions 143 x 188 x 131 mm / 5.63 x 7.4 x 5.16 in Weight 0.4 kg / 0.88 lbs This unit has been designed to be hung. It is recommended that, for safety purposes, your lighting effect be properly mounted using a suitable hanging clamp and safety cable. CHAUVET offers a range of items, which are ideal for safe mounting. User Information (Please complete for your records) Unit should be mounted in such a manner that the emitted beam will no strike people. Data Purchased : / / Serial No. : Cleaning Dealer Stamp : Model : LGG-1550G Green Wizard The most important part your lighting effect to keep clean is the glass front as this allows the laser output LGG-1505R Laser Wizard to transmit. This should be cleaned with a soft damp cloth. The housing of the unit may also be cleaned in the same way. Internal cleaning must be carried out by a fully qualified technician.