Docstoc

HURRISAFE 9100 Paint Prep- Residue Free Cleaning

Document Sample
HURRISAFE 9100 Paint Prep- Residue Free Cleaning Powered By Docstoc
					  HURRISAFE 9100 Paint Prep- Residue Free Cleaning
Procedures for Use to Prepare Race Car Surface for Paint




 1. Apply copious amounts of Hurrisafe 9100 Paint Prep to the entire surface to
    be prepared, flooding the entire surface.

 2. Scrub the surface using 180-240 grit (fine) Aluminum Oxide (red/burgundy)
    Pads. The scrubbing action will generate a rich lather.

 3. Pay particular attention to all edges, hood area, door jams, and headlight and
    rear light area and other surface that can trap dirt and dust. .

 4. Star from the top down.

 5. Allow to sit 2-3 minutes

 6. Add more Hurrisafe 9100 to flood the area and completely scrub the surface
    again with a 180-240 grit (fine) Aluminum Oxide (red/burgundy) Pads

 7. Rinse the Race Car thoroughly and allow to dry.

 8. Just before the primer/paint is applied wipe the entire car down with a clean,
    lint free cloth, that has been moisten with Hurrisafe Paint Prep

 9. Car is now ready for primer.

 10. Repeat Step eight in between primer and top coat if the car is exposed to
     significant airborne contamination prior to priming or painting the entire
     surface should be wiped down

				
DOCUMENT INFO
pptfiles pptfiles
About