Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

SAFE STEP Tile Treatment by RobParke

VIEWS: 0 PAGES: 2

									                                                                                                      Ref             SSTTB
                                                                                                      Date            31-3-04
                                                                                                      Issue No        3
                                                                                                      Page No         1 of 2


                                              SAFE STEP® Tile Treatment
                                      Technical Data & Application Instructions


              Description

              SAFE STEP® Tile Treatment is a suitable method for increasing the slip resistance of wet tiled
              surfaces. Can be used on ceramic tiles as well as marble, granite and terrazzo floors.

              SAFE STEP® Tile Treatment gives a microscopic peak and trough texture.


              Technical Data (Typical)

              Description:                                                Translucent blue gel
              Pack Size:                                                  5 Litres
              For use on:                                                 Tiles, marble, granite, terrazzo
              Density:                                                    1.04
              Coverage Rate:                                              40-50 m² per 5 Litre
              Health & Safety:                                            Corrosive
              pH range:                                                   4-6
              Application Temperature (surface):                          5-25ºC
              Shelf Life:                                                 2 year
              Flammability:                                               Non flammable
              Application:                                                Internal/External
              VOC (Volatile Organic Compounds):                           0 g/l
              Flash Point:                                                >100°C
              Dilution:                                                   Not recommended. Use as supplied
              Treatment Time:                                             30-45 minutes
              Storage:                                                    Keep container tightly closed and dry.
                                                                          Store at 5-25ºC

              TRL Pendulum Slip Resistance (4S slider)                    Untreated Tile          Treated Tile

              Dry:                                                           64                             66
              Wet:                                                           15                             49

              Surface Preparation
              1. All surfaces should be clean, dry and free                Application
                                                                                                                ®
                 from dirt and grease. It is important that                1. Evenly pour the SAFE STEP            Tile
                 any wax, polish and sealers are removed                      Treatment directly onto the prepared
                 prior to using the SAFE STEP® Tile                           surface at a rate of 100 ml per m² and
                 Treatment                                                    leave for 30-45 minutes. The product
                                                                              should be agitated over the surface every
              2. Any     surfaces    covered   in   heavy                     10 minutes during this time with a soft
                 grime/grease should be cleaned with                          brush. Add more product as required to
                              ®
                 SAFE STEP Heavy Duty Cleaner (or any                         keep the surface wet.
                 other good quality industrial detergent),
                 washed down thoroughly with clean water                   2. After 30-45 minutes, rinse a small area
                 and allowed to dry.                                          with clean water and test the slip
                                                                              resistance by pushing foot over surface. If
              3. Mask off and cover any surrounding                           the slip resistance properties are adequate
                 surfaces not requiring treatment.

                                                 ROCOL Site Safety Systems
                                          ROCOL House, Swillington, Leeds, LS26 8BS, United Kingdom
                          Tel: +44 (0)113 232 2800 Fax: +44 (0)113 232 2850 Technical Helpline: +44 (0)113 232 2840
                                  A Division of ITW Ltd. Registered Company No. 559693 VAT No. 742 0530 69
                                                                 www.rocol.com
                                Registered Office: Admiral House,St. Leonards Road, Windsor, Berkshire, SL4 3BL



PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
                                                                                                       Ref             SSTTB
                                                                                                       Date            31-3-04
                                                                                                       Issue No        3
                                                                                                       Page No         2 of 2


                  then continue as below. If not then step 1
                  and 2 should be repeated.

              3. After treatment a sodium bicarbonate
                 solution (Approx 100g in 5 litres of water)
                 may be applied directly to the treated
                 surface to ensure that any remaining
                 unreacted product is neutralised before
                 disposal.

              4. After treatment the area should be rinsed
                 thoroughly with clean fresh water and
                 allowed to dry.

              Caution
              Product suitability should be checked by
              testing first on a small inconspicuous area. In
              some cases it will remove the gloss from some
              tiled surfaces after treatment.

              Due to the acidic nature of the product avoid
              contact with metal or painted and lacquered
              surfaces. If this does occur wash off
              immediately with water, staining may occur.

              Do not apply when the surface temperature
              exceeds 25ºC

              Surface Maintenance
              After treatment it is important that the surface
              be cleaned regularly to maximise anti-slip
              performance. For heavily soiled surfaces the
              use of water based biodegradable detergent
              cleaner may be used in conjunction with a
              brush or mop. After cleaning, rinse thoroughly
              with clean water and allow to dry before use.

              Health & Safety
              Refer to Safety Data Sheet before use. If
              further copies are required or for further
              information, please contact us at the address
              below:

              Minimum Precautions
              Product causes burns and is harmful if
              swallowed. Wear suitable protective clothing,
              gloves and eye/face protection.


              In case of accident or if you feel unwell seek
              medical advice immediately.
              In case of contact with eyes, rinse immediately
              with plenty of water and seek medical advice.
              Use only in well ventilated areas.


                                                  ROCOL Site Safety Systems
                                           ROCOL House, Swillington, Leeds, LS26 8BS, United Kingdom
                           Tel: +44 (0)113 232 2800 Fax: +44 (0)113 232 2850 Technical Helpline: +44 (0)113 232 2840
                                   A Division of ITW Ltd. Registered Company No. 559693 VAT No. 742 0530 69
                                                                  www.rocol.com
                                 Registered Office: Admiral House,St. Leonards Road, Windsor, Berkshire, SL4 3BL



PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com

								
To top