Geothermal Service Contract - Excel

Document Sample
Geothermal Service Contract - Excel Powered By Docstoc
					Instructions for the Build Green NM Certification Checklist
This spreadsheet refers directly to the NAHB Model Green Home Building Guidelines. For
clarification on a section please refer to the corresponding section of the Guidelines.

Builders are encouraged to go through the guidelines in the design phase of a project to
assess what level to aim for and what needs to be incorporated into the project to meet
that goal. A third-party rater should also be contacted at this point to do an initial
assessment and schedule later on-site testing. As you progress through the project,
update the Checklist with any relevant details and collect all appropriate documentation.

When filling out the checklist, refer to the "Acceptable Documentation" column for details
regarding what documentation is acceptable to verify compliance. If the "Acceptable
Documentation" column is blank, there is no required documentation, but information
regarding how the criteria was met should be included in the last column.

The last column allows space for you to describe why you think that you meet the listed
criteria. Please include any information that may aid in verifying compliance, like detailed
information about a product used and instructions on where within the documentation to
find supporting information.

Once you have all of the information that you need to complete the Checklist, submit it
with the supporting documentation and 3rd Party test results noted in the checklist. The
administrator will review your application and contact you regarding any discrepancies or
missing items. As soon as your certification packet has been reviewed to the approval of
the BGNM Administrator, you will receive a certificate noting the total points accrued and
the level to which the home is certified. The Certification Fee is due when the certificate is
issued.
Checklist Summary

Project Information                                                                                       Project Number:
Builder:                                                                  Date:                           Phone:(              )
Contact Person:                                                           Email:
Project Address:
City, State                                                                                                         Zip:
Model Name and Plan #
Is the project in a BGNM Certified Community?        Yes         No       Name of community:
Is this a reissue of a floor plan certified at another address by BGNM?       Yes      No
Address of the certified model:
Are you applying for the NM Sustainable Building Tax Credit?              Yes        No                   For Tax Year:
Certification Fee for Bronze or Silver $195.00 / Gold $595.00             Amount Enclosed: $


Instructions

In order to be certified, the project must meet the point criteria for the desired level in every section and accrue at least 80, 90, or 100
additional points from any section(s) for bronze, silver, and gold, respectively. The checklist should automatically insert and sum your point
totals from each section.

Please submit a digital copy and a hard copy to Build Green NM with your certification packet. A final version of the approved checklist will
need to be signed upon receipt of the home certification.




Sections                                                                  Points Claimed                  Points Required
DOCUMENTATION IS REQUIRED FOR ALL POINTS CLAIMED                                                          Bronze           Silver   Gold
Section 1: Lot Design                                                     0                               8                10       12
Section 2: Resource Efficiency                                            0                               44               60       77
Section 3: Energy Efficiency                                              0                               37               62       100
Section 4: Water Efficiency                                               0                               30               40       50
Section 5: Indoor Environmental Quality                                   0                               32               54       72
Section 6: Operation, Maintenance and Homeowner Education                 0                               7                7        9
Section 7: Global Impact                                                  0                               3                5        6
Required Extra Points Accumulated From All Seven Sections                                                 80               90       100

Total Points                                                              0                               241              328      426

HERS Index _________     Square Footage __________________


I hereby certify that the information contained herein is accurate and complete to the best of my knowledge.

Builder's Signature:                                                                                      Date:


Build Green Director's Signature                                                                          Date:
            Property Address:                                                    Verifiable
            Section 1
                                                                     Available    Points        Acceptable             Explain in detail how criteria was met and/or note
            Lot Design, Preparation, and Development Points                      Claimed       Documentation                       attached documentation.
         1.1 Select the site. Select the site to minimize
Sitework environmental impact.
         1.1.1. Avoid environmentally sensitive areas as                7                     Set of Site Plans
         identified through site foot-printing process or existing                            SWPPP
Sitework third party data.
         1.1.2 Choose an infill site.                                   9                     Surrounding area
                                                                                              must be at least
                                                                                              five years old, or
                                                                                              the lot is a
Sitework                                                                                      teardown.
            1.1.3 Choose a Greyfield site.                              7                     Site was previously
                                                                                              built for non-
                                                                                              residental,non-
                                                                                              agricultural uses
                                                                                              and at least 50%
Sitework                                                                                      impervious
            1.1.4 Choose an EPA-recognized Brownfield.                  7                     surfaces
                                                                                              Government map
                                                                                              that the lot is within
                                                                                              an officially
                                                                                              designated
Sitework                                                                                      Brownfield
Sitework 1.2 Identify goals with your team.
Sitework 1.2.1 Establish a knowledgeable team.                          6                     Written Mission Statement
         A. Identify team member roles and how they relate to                                 Mission statement
         various phases of green lot design, prep, and                                        should include
         development.                                                                         team goals and
                                                                                              team member
Sitework                                                                                      roles.
         B. Create a mission statement that includes the                                      Mission Statement
Sitework project‟s goals and objectives.
Sitework 1.3 Design the site.
         Minimize environmental impacts; protect, restore, and
         enhance the natural features and environmental
         quality of the site (points for each guideline are only
Sitework rewarded upon implementation of these plans).
         1.3.1 Conserve natural resources. A-D must be
         addressed. Documentation needs to show
         compliance/implementation for each item.
Sitework
         A. Complete a natural resources inventory used to              2                     Natural Resources
         create the site plan                                                                 Inventory or site
                                                                                              plan with protected
                                                                                              areas noted
Sitework
            B. Create a protection and maintenance plan for             1                     Protection and
            priority natural resources/areas during construction.                             Maintenance Plan
Sitework    See Section 1.4 for guidance in forming the plan.
            C. Participate in a natural resources conservation          1
Sitework    program, e.g., Building With Trees.
            D. Provide basic training in tree and other natural         1
Site work   resource protection to onsite supervisor.
            1.3.2 Site the home and other built features to             n/a                   Points for whole         See Section 3.3.5.1 for solar
            optimize solar resource                                                           development only
Sitework    1.3.3 Minimize slope disturbance.                           5                     A-D must qualify         Must do all that apply.
            A. Limit development footprint on steep slopes (slopes                            Site Plans with
Sitework    greater than or equal to 25%).                                                    Topo lines
            B. Complete a hydrological/soil stability study for                               Soil Study
            steep slopes and use this study to guide the design of
Sitework    all structures onsite.
            C. Align road or extended driveway with natural                                   Site plan and topo
            topography to minimize its grade and reduce cut and
Sitework    fill.
            D. Reduce long-term erosion effects through the                                   Site plan and topo
            design and implementation of terracing, retaining
Sitework    walls, landscaping, and restabilization techniques.
            1.3.4 Minimize soil disturbance and erosion. See            6                     Sediment and
            Section 1.4 for further guidance.                                                 erosion control
Sitework                                                                                      plans (SWPPP)

     \faa1db16-20d9-4a6d-83d1-7e6172e58938.xls, Section 1                                                                                          Printed: 6/17/2011
         A. Schedule construction activities to minimize
Sitework exposed soils.
         B. Use alternative means to install utilities, such as
         tunneling instead of trenching, use of smaller
         equipment, shared trenches or easements, and
Sitework placement of utilities under streets instead of yards.
Sitework C. Demarcate limits of clearing and grading.
         1.3.5 Manage storm water using low impact                    8   SWPPP/ Storm
         development. Plan shows natural water and drainage               Water
         features. Maximum of 50% of driveways, parking                   Management Plan
Sitework areas, patios and walkways are impervious.
         A. Preserve and use natural water and drainage
Sitework features.
         B. Develop and implement storm water management
         plans that minimize concentrated flows and seek to
Sitework mimic natural hydrology.
         1.3.6 Devise landscape plans to limit water and                  Set of Landscape
         energy demand while preserving or enhancing the                  Plans
Sitework natural environment.
         A. Formulate a plan to restore or enhance natural            1
         vegetation that is cleared during development. Within
         this plan, phase landscaping to ensure denuded areas
Sitework are quickly vegetated.
         B. Select turf grass and other vegetation that are           1
Sitework native or regionally appropriate species.
         C. Minimize impervious surfaces and use permeable            1
         materials for driveways, parking areas, walkways, and
Sitework patios.
         D. Limit turf areas of landscaped area, selecting            1
         native and regionally appropriate trees and vegetation
Sitework in a way that complements the natural setting.
         E. Group plants with similar watering needs (hydro-          1
Sitework zoning).
         F. Specify planting of trees to increase site shading        1
         and moderate temperatures (see also Energy
         Efficiency guideline 3.4.1.c specifying siting of trees to
Sitework reduce the energy consumption of the home).
         G. Design vegetative wind breaks or channels as              1                         SWPPP
Sitework appropriate to local conditions.
         H. Require onsite tree trimmings or waste of                 1
         regionally appropriate trees to be used as protective
         mulch during construction or as a base for walking
Sitework trails.
         I. Establish an integrated pest management plan to           1
Sitework minimize chemical use of pesticides and fertilizers.
         1.3.7 Maintain/ Enhance wildlife habitat. Enhance            5   Set of Site plans
         quality of habitat, including food sources, diversity of
         habitat, and protective areas through selective
Sitework plantings and site design.
         1.4 Develop the site. Minimize environmental
Sitework intrusion during onsite construction.
         1.4.1 Provide onsite supervision and coordination            5   Site Plan/SWPPP
         during clearing grading, trenching, paving and
         installation of utilities to ensure that green
         development practices are in place (see 1.3.4)
         Implementation of erosion fencing or flagged lines to
Sitework protect unexcavated areas;
Sitework 1.4.2 Conserve existing onsite vegetation.                   5   Landscape Plan
         A. Minimize disturbance of and damage to trees and
         other vegetation designated for protection through
         installation of fencing and avoidance of trenching,
         significant changes in grade, and compaction of soil
Sitework and critical root zones.
         B. Prepare designated existing trees and vegetation              Evidence such as
         for the impacts of construction through pruning, root            Arborist's invoice
         pruning, fertilizing, and watering.                              for tree care and
                                                                          physical
                                                                          construction
                                                                          barriers to protect
Sitework                                                                  trees and roots.
           1.4.3 Minimize onsite soil disturbance and erosion.        6   SWPPP/ Storm
           A - G need to be incorporated                                  Water
                                                                          Management Plan -
                                                                          Sediment and
Sitework                                                                  erosion control
Sitework A. Demarcate limits of clearing and grading.                     plans


     \faa1db16-20d9-4a6d-83d1-7e6172e58938.xls, Section 1                                               Printed: 6/17/2011
         B. Create construction “no disturbance” zones using
         fencing or flagging to protect vegetation and sensitive
         areas from construction vehicles, material storage,
Sitework and washout.
         C. Install and maintain sediment and erosion controls.
Sitework
Sitework D. Stockpile and cover good soil for later use.
         E. Reduce soil compaction from construction
         equipment through laying mulch, chipped wood, or
Sitework plywood sheets.
         F. Stabilize disturbed areas within the EPA
Sitework recommended 14-day period.
         G. Improve the soil with organic amendments and
Sitework mulch.
Sitework 1.5 Innovative options
         Seek to obtain waivers or variances from local
Sitework development regulations to enhance green building.
Sitework 1.5.1 Share driveways or parking.                         6   Site Plan
Sitework 1.5.2 Other (specify).
         BRONZE MINIMUM = 8
         SILVER MINIMUM = 10
         GOLD MINIMUM = 12
         TOTAL SECTION ONE POINTS




     \faa1db16-20d9-4a6d-83d1-7e6172e58938.xls, Section 1                          Printed: 6/17/2011
          Property Address:
          Builder:




          Section 2
                                                                    Available    Points    Acceptable           Explain in detail how criteria was met and/or note
          Resource Efficiency                                        Points     Claimed   Documentation                     attached documentation.
          2.1 Reduce quantity of materials and waste
        2.1.1 Create an efficient home floor plan smaller than    9 max;                  Floor plan (with
        the national average. See chart "Guidelines for                                   sq. footage) BR
        Efficient Floor Plan Design" in Section 2.1.1 of the                              must have closet
Design Guidelines.
        2.1.2 Use advanced framing techniques that reduce        8 max; 4                 Plans with
        the amount of home building material while              pts for any               advanced framing
        maintaining the structural integrity of the home . such   2 items                 details. List
        as 24" 0/C, Single top plate on Interior / Exterior and                           advanced framing
        Bearing walls, Two-stud joists, etc. ( see User Guide                             techniques used
Framing for examples)
        2.1.3 Use 2' increment dimensions and layouts that            6                   House plans
        maximize the use of the resources by minimizing
Design material cuts.
        2.1.4 Create detailed material takeoffs. Provide an           7                   Framing Detail
Design onsite cut list for all framing and sheathing material.                            Takeoffs/ Cut List
        2.1.5 Use building materials that require no additional       4                   List Materials;
        finish resources to complete application onsite (i.e.                             Pre/no finish
        pigmented concrete floors, pre-finished trim not                                  materials used in
        requiring paint or stain, composite decking, etc.).                               a least 80% of
                                                                                          the construction;
                                                                                          exposed
                                                                                          concrete, pre-
                                                                                          finished siding,
                                                                                          hardwood floor,
Design                                                                                    wall paneling etc.
          2.1.6 Use pre-cut or pre-assembled building systems
Design    or methods
          A. Provide a pre-cut (joist) or pre-manufactured            3 per               House plans with
          (truss) floor and roof framing package – points                                 framing details or
Framing   provided for a flooring or a roof framing package.                              Truss detail.
Framing   B. Provide a panelized wall framing system                   6
Framing   C. Provide a panelized roof system                           6
Framing   D. Provide modular construction for the entire house         7
          2.1.7 Use a frost-protected shallow foundation               4                  House Plan with
Design    (FPSF). See diagram in 2.1.6 in Guidebook.                                      footing detail
Design    2.2 Enhance durability and reduce maintenance
          Building design minimizes degradation and
          weathering of materials/enhances life expectancy.
Design    Features and details to be specified on architectural
          plans.
          2.2.1 Provide a covered entry (e.g., awning, covered         6                  Elevation or site
          porch) at exterior doors to prevent water intrusion                             plans
Design    and subsequent rotting of joists, sills, and finishes
          2.2.2 Use recommended-sized roof overhangs for               7                  Elevation or site
Design    the climate.                                                                    plans
          2.2.3 Install perimeter drain for all basement footings      7                  Site Plans
Design    sloped to discharge to daylight, dry well, or sump pit
          2.2.4 Install drip edge at eave and gable roof edges         6                  plan with detail
Design                                                                                    and photographs
         2.2.5 Install gutter and downspout system to divert           6                  plan with detail or
         water 5‟ away from foundation and from there into the                            photographs
Design overall onsite drainage area
         2.2.6 Divert surface water from all sides of building.        7                  Site Plans
         Slope top of backfill to achieve settled slope of at                             drainage 10' from
Sitework least 6” of fall within 10 feet of the foundation walls                          the foundation
         2.2.7 Install continuous and physical foundation              7                  Continous barrier
         termite barrier in areas where subterranean termite                              below all framing
         infestation is locally problematic.                                              members
         2.2.8 Use termite-resistant materials for walls, floor        7                  Treated lumber
         joists, trusses, exterior decks, etc. in areas known to                          or steel, masonry
Framing be termite infested.
         2.2.9 Provide a water-resistive barrier (WRB) or a            8                  List WRB used
         drainage plane system behind the exterior veneer
Stucco   system or the exterior siding.
         2.2.10 Install ice flashing at roof„s edge                    5                  Flashing details
                                                                                          at least 24" past
Design                                                                                    the inside wall
                                                                                          surface
     6                                             6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
           2.2.11 Install enhanced foundation waterproofing           7        House Plans with
                                                                               detail or
Design                                                                         specifications
           2.2.12 Employ and show on plans the following              9        House Plans with
Design     flashing details:                                                   flashing details
Design     A. Around windows and doors
Design     B. Valleys
Design     C. Deck/house juncture
Design     D. Roof/wall junctures, chimneys step flashing
Design     E. Drip cap above windows and doors
Sitework   2.3 Reuse materials
           2.3.1 Disassemble existing buildings (deconstruction)      6        provide invoice or
           instead of demolishing                                              photos showing
                                                                               deconstruction
                                                                               and materials
Sitework                                                                       reused
           2.3.2 Use salvaged materials, where possible.              5        product sheet /list
                                                                               salvaged
                                                                               materials > 1% of
Sitework                                                                       construction cost
           2.3.3 Dedicate and provide onsite bins and/or space        6        recycling plan (in
           to facilitate the sorting and reuse of scrap building               C&D Waste
           materials. Per C&D posted on site; Clearly label bins.              Management
                                                                               Plan),
Sitework                                                                       photographs
Sitework 2.4 Use Recycled content materials
         2.4.1 Use recycled-content building materials. 3 pts       6 max;     list materials
         for 2 recycled items, 1 point for each the next 3                     used contain at
         recycled items                                                        least 10%
                                                                               recycled content
                                                                               in 80% of the
Sitework                                                                       material to qualify
Sitework 2.5 Recycle waste materials during construction
         2.5.1 Develop, post at jobsite, and implement a              7        POST onsite
         construction and demolition (C & D) waste                             recycling
         management plan that sets a goal to recycle 50% or                    efforts/C&D
         greater, by weight, of construction, demolition & land                Waste
         clearing waste.                                                       Management
                                                                               Plan. Provide
                                                                               receipts from
                                                                               landfill with
Sitework                                                                       recycling weight
           2.5.2 Conduct onsite recycling efforts, e.g., use          5        POST on site a
           grinder and apply materials onsite, thus reducing                   C&D Waste
           transportation-related costs.                                       Management
                                                                               Plan. Provide
                                                                               receipts from
                                                                               landfill with
Sitework                                                                       recycling weight
           2.5.3 Recycle construction waste offsite, e.g., wood,      6        List materials that
           cardboard, metals, drywall, plastics, asphalt roofing               were recycled
           shingles, concrete, block, other.                                   offsite (use of 2
                                                                               different materials
Sitework                                                                       = 6 pts)
Finish work .6 Use renewable materials
          2
          2.6.1 Use materials manufactured from renewable             5        List materials that
          resources (e.g., agricultural byproduct based                        were recycled
          products such as soy-based insulation; bamboo.                       offsite (use of 2
          OSB, Plywood sheething, particleboard, agrifiber                     different materials
          products, etc)                                                       = 6 pts, 3
Finish work                                                                    materials = 5pts)
          2.6.2 Use certified wood for wood and wood-based            4        Product literature
          materials and products from all credible third party                 & 80% of product
Finish work
          certified sources, including                                         used
Finish work . The Sustainable Forestry Initiative® Program
          A
Finish work . The American Tree Farm System®
          B
          C. The Canadian Standards Association‟s
          Sustainable Forest Management System Standards
          (CAN/CSA Z809)
Finish work
Finish work . Forest Stewardship Council (FSC)
          D
          E. Program for the Endorsement of Forest
Finish work
          Certification Systems (PEFC), and
          F. Other such credible programs as they are
Finish work
          developed and implemented.
Finish work .7 Use resource-efficient materials
          2

     7                                             6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
          2.7.1 Use products that contain fewer resources to      3           List materials
          meet the same end-use as traditional products I-                    used, 2 products
Finish work
          joist, trusses, finger joint studs                                  = 3 pts
Finish work .8 Innovative options
          2
          2.8.1 Use locally available, indigenous materials       3           List materials
Finish work                                                                   used
          2.8.2 Use a life cycle assessment (LCA) tool to         8           Provide LCA
          compare the environmental burden of building                        literature and
          materials and, based on the analysis, use the most                  calculations
          environmentally preferable product for that building
          component.
Finish work
          2.8.3 To avoid using a traditional water softener and   1           Provide
          use a non-chemical water conditioning system (such                  manufacturers
          as a magnetic system) to reduce mineral buildup and                 product
          increase the durability of the home.                                information
          BRONZE MINIMUM = 44
          SILVER MINIMUM = 60
          GOLD MINIMUM = 77
          TOTAL SECTION TWO POINTS                                       0




     8                                            6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
         Property Address:
         Builder:


         Section 3
         Energy Efficiency
         GUIDELINE                                              PTS       PTS          Acceptable            Explain in detail how criteria was met and/or note
                                                                AVAI    CLAIMED       Documentation                      attached documentation.
                                                                 L
         3.1 Implement integrated and comprehensive
         approach to energy-efficient design of building
         site, building envelope, and mechanical space
HVAC     conditioning systems
         REQUIREMENTS – The home must meet the
         following conditions listed in 3.1.1 through 3.1.3
HVAC     below.
         3.1.1 Home is 15% more energy efficient than            Req.             ResCheck
         required by IECC 2003. Conformance to this                               Analysis.REM/Rate is
         threshold shall be based on plan analysis using                          required for a Gold
         software such as ResCheck or other as approved by                        rating.
HVAC     Build Green NM.
         3.1.2 Size space heating and cooling                    Req.             Manual J, D, S, and T   A. Size, design, and install duct system using
         system/equipment according to building heating and                       load calculations, or   ANSI/ACCA Manual D® or equivalent.
         cooling loads calculated using ANSI/ACCA Manual J                        other software approved
         (7th or 8th Edition or equivalent, Computerized                          by the program
         software recognized by ACCA as being in                                  administrator.
         compliance with Manual J 8th Edition), Manual S,
HVAC     Manual D, and Manual T.
         3.1.3 Conduct third party plan review to verify design Req.              ResCheck or REM/Rate B. Design radiant or hydronic space heating systems
         and compliance with the Energy Efficiency section.                       done by 3rd Party ** using industry-approved guidelines, e.g., Guidelines
         When multiple homes of the same model are to be                                               for the Design and Installation of Radiant Panel
         built by the same builder, a representative sample                                            Heating and Snow/Ice Melting Systems by the
         (15%) of homes may be reviewed subject to a                                                   Radiant Panel Association, Heat Loss Guide (H-22)
HVAC     sample.
         3.1.4 After qualification of the builder, mandatory                      To qualify for random
         tests for multiple homes built to the same floor plan                    sampling on re-issues of
         within the same subdivision or metropolitan area and                     the same plan, provide
         climate zone may be sampled for these tests at a                         all applicable home
         rate of one in seven (7) homes. Different elevations                     energy testing for the
         of the same plan shall be considered to meet this                        first seven consecutive
         requirement. To qualify for sampling in a                                projects, including
         metropolitan area, a builder must first complete,                        Building Envelope
         without any incidence of failure, a complete set of the                  Leakage tests, Duct
         mandatory tests on at least seven consecutive                            Leakage tests,
         homes in that metropolitan area. For this initial                        REM/Rate or ResCheck.
         phase of testing all applicable tests shall be
         performed in each of the seven (7) consecutive
         homes. After the builder qualifies, the BGNN
         program administrator shall randomly select the
         homes to be sampled. Exceptions: a builder who is
         participating in the Energy Star for Homes program
         and following the RESNET sampling protocol will be
         considered to meet the BGNM sampling
         requirements. A builder currently qualified to the
         RESNET sampling protocol will not be required to re-
         qualify.Check is acceptable for a Bronze or Silver
         ** Res
         rating, but a Gold rating requires REM/Rate.
         3.2 Performance path
         An energy efficiency line item with a “(PP)”
         preceding it is a line item likely to be used to
         calculate X% above IECC 2003. If a builder chooses
         to use the performance path – line item 3.2.1 – to
         meet the guideline‟s energy efficiency requirements,
         then the items preceded with (PP) are not available.
         3.2.1 Home is X% above IECC 2003
         A. 15% (Bronze)                                         37               ResCheck Analysis/
                                                                                  REM/Rate
         B. 30% (Silver)                                         62               ResCheck Analysis/
                                                                                  REM/Rate
        C. 40% (Gold) Third Party HERS rater to perform         100               REM/Rate                   NEED ENTIRE HERS ENERGY TEST RESULTS
        3.3 Prescriptive path (PP)                                                                           (PP) Not available if points awarded in 3.2.1)
Framing 3.3.1 Building envelope




    9                                          6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
           (PP) 3.3.1 A. Increase effective R-value of building
           envelope using advanced framing techniques,
           continuous insulation, and/or, integrated structural
           insulating system. Measures may include but are
Framing not limited to:
Framing SIPS, or                                                       8      House Plans
Framing ICFS, or                                                       8      House Plans
            Advanced Framing                                           6      House Plans with
Framing                                                                       framing details
                  -     Insulated corners and interior/exterior wall
Framing intersections*
Framing            - Insulated headers on exterior walls
Framing Raised heel trusses                                            2
Insulatio Continuous insulation on exterior wall                       4
n
Insulatio Continuous insulation on cathedral ceiling                   4
n
           (PP) 3.3.1 B. Incorporate air sealing package to            10     Building Specifications
Insulatio reduce infiltration. (All measures that apply to
n          project must be performed.)
Insulatio 1.      Sill sealer between foundation and sill plate.
n
Insulatio 2.      Caulk bottom plate of exterior walls.
n
Insulatio 3.      Air seal band joist cavities between floors.
n
           4.     Ensure air barrier continuity at all framed
           cavities such as air chases, soffits, coffered or
           dropped ceilings, and behind tub/shower units on
Insulatio exterior walls. Utilize either an interior or exterior air
n          barrier as per local practice.
           5.     Caulk/foam all electrical, plumbing, heating
Insulatio penetrations between floors (including attic,
n          basement, crawl space, and garage) and to exterior
Insulatio 6.      Block and seal cantilevered floors and
n          kneewalls.
Insulatio 7.      Weatherstrip attic hatches, kneewall doors.
n
Insulatio 8.      Insulate, caulk, or foam between window/door
n          jambs and framing.
           9.     If installing recessed lights in ceilings adjacent
           to unconditioned space, use rated, air-tight Type IC
Electrical housings.
           10. Caulk/foam HVAC register boots that penetrate
Insulatio the building envelope to subfloor or drywall that
n          penetrate the building envelope.
           11. If a fireplace is installed, install a gas fireplace
           that is sealed combustion or a wood-burning
Framing fireplace with gasketed doors.
           (PP) 3.3.1 C. Use ENERGY STAR® – rated windows              8      Product information:
           appropriate for local climate.                                     www.efficientwindows.or
Windows                                                                       g
HVAC         3.3.2 HVAC design, equipment, and installation                                             PERFORMANCE PATH
           A. Size, design, and install duct system using              8          "Manual J" should
HVAC       ANSI/ACCA Manual D® or equivalent.                                       include D,S,T
           B. Design radiant or hydronic space heating systems         8      Documentation of
           using industry-approved guidelines, e.g., Guidelines               design or design signed
           for the Design and Installation of Radiant Panel                   by professional
           Heating and Snow/Ice Melting Systems by the
HVAC       Radiant Panel Association, Heat Loss Guide (H-22)
           C. Use ANSI/ACCA Manual S® or equivalent to                 8      Manual S calculation
HVAC       select heating and/or cooling equipment.
           D. Verify performance of the heating/cooling system.        8      contract with HVAC
HVAC       HVAC contractor to perform the following:                          contractor
           · Start-up procedure according to manufacturer‟s
HVAC       instructions
           · Refrigerant charge verified by super-heat and/or
HVAC       sub-cooling method
HVAC       · Burner set to fire at nameplate input
HVAC       · Air handler setting/fan speed
HVAC       · Total air flow within 10% of design flow
           · Total external system static should not exceed
HVAC       equipment capability at rated airflow.



     10                                             6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
         E. Use HVAC installer and service technician        6                HVAC Contractor
         certified by a nationally or regionally recognized                   Certificate
         program such as NATE, BPI, RPA, or manufacturers‟
HVAC     training.
         PRESCRIPTIVE PATH (PP) continued                   Point   are not   available if awarded    in 3.2.1
                                                             s
         (PP) F. Fuel-fired space heating equipment                           Product information
HVAC     efficiency (AFUE):
HVAC     Gas Furnace ≥81%                                    4
HVAC     ≥88% (ENERGY STAR)                                  6
HVAC     ≥94%                                                8
HVAC     Oil Furnace: ≥83%                                   2
HVAC     Gas or Oil Boiler: ≥85%% (ENERGY STAR)              2
HVAC     >90%                                                6
         Note: Add 3 Points if Manual S and D and startup
         procedures are followed when one of the space
HVAC     heating units noted above is installed.
         (PP) G. Heat pump efficiency (cooling mode)                          Certification of HVAC
HVAC                                                                          contractor
HVAC     1. SEER 11-12*                                       0
HVAC     2. SEER 14                                           4
HVAC     3. SEER 15-18                                        6
HVAC     4. SEER 19+                                          7
HVAC     5. Staged air conditioning equipment                 9
         Note: Split-systems must be ARI-tested as a
HVAC     matched set.
         Note: Add 3 points if Manual S and D and start-up
         procedures are followed when one of the ground
         source heat pumps noted above has been installed.
HVAC     Do not take these points again in 3.3.2.H.
         (PP) H. Heat pump efficiency (heating mode)                          Certification of HVAC
HVAC                                                                          contractor
HVAC     1. 7.2-7.9 HSPF                                      6
HVAC     2. 8.0-8.9HSPF                                       7
HVAC     3. 9.0-10.5HSPF                                      9
HVAC     4. >10.5 HSPF                                        10
         Note: Split-systems must be ARI-tested as a
HVAC     matched set.
         (PP) I. Ground source heat pump installed by a                       Certification of HVAC
         Certified Geothermal Service Contractor. (cooling                    contractor
HVAC     mode)
HVAC     1.     EER = 13-14                                   5
HVAC     2.     EER = 15-18                                   6
HVAC     3.     EER = 19-24                                   8
HVAC     4.     EER = >25                                     10
         Note: Add 3 points if Manual S and D and start-up
         procedures are followed when one of the ground
         source heat pumps noted above has been installed.
HVAC     Do not take these points again in 3.3.2.J.
         (PP) J. Ground source heat pump installed by a                       Certification of HVAC
         Certified Geothermal Service Contractor. (heating                    contractor
HVAC     mode)
HVAC         1.COP 2.4 - 2.6                                  6
HVAC         2.COP 2.7 - 2.9                                  8
HVAC         3. COP ≥3.0                                      10
         Performance Path continues from 3.2.1
         K. Seal ducts, plenums, and equipment to reduce      6               Certification of HVAC
HVAC     leakage. Use UL 181 foil tapes and/or mastic.                        contractor
HVAC     L. When installing ductwork:                         8
             1.No building cavities used as ductwork, e.g.,                   Certification of HVAC
         panning joist or stud cavities.                                      contractor shows duct
HVAC                                                                          design
               2.Install all heating and cooling ducts and                    floor plan
           mechanical equipment within the conditioned
HVAC       building envelope.
           Safety Notice: There are energy and water
           efficiencies to be gained by placing the furnace and
           water heater in conditioned space. BGNM does not
           recommend the installation of gravity vented
           appliances within the living area due to the possibility
           of carbon monoxide poisoning.
HVAC           3.No ductwork installed in exterior walls.           15         House plans
           M. Install return ducts or transfer grilles in every     6          Certification of HVAC
           room having a door except baths, kitchens, closets,                 contractor Building
HVAC       pantries, and laundry rooms.                                        specs
           N. Install ENERGY STAR ceiling fans. (Points per         1          Product information
     11
Electrical fan.)                                     6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
Electrical O. Install whole-house fan with insulated louvers.           4      Product information
           P. Install ENERGY STAR labeled mechanical                    8      Product information
Electrical exhaust from every bathroom ducted to the outside.
Plumbin 3.3.3 Water heating design, equipment, and
g          installation
Plumbin A. Water heater Energy Factor (EF) equal to or                  4      Installer certified &
g
Plumbin greater than those listed in the following table.                      product information
g
Plumbin                              Gas                                       www.gamanet.org
g
Plumbin               Size (Gallons)     Energy Factor
g
Plumbin                         30        0.64
g
Plumbin                         40        0.62
g
Plumbin                         50        0.60
g
Plumbin                         65        0.58
g
Plumbin                         75        0.56
g
Plumbin                            Electric
g
Plumbin                         30        0.95
g
Plumbin                         40        0.94
g
Plumbin                         50        0.92
g
Plumbin                         65        0.90
g
Plumbin                         80        0.88
g
Plumbin                         100       0.86
g
Plumbin                              Oil
g
Plumbin                         30        0.59
g                               50        0.55
             B. Install whole house instantaneous (tankless)            4      Installer certified &
Plumbin      water heater. (Water heater complies with DOE                     product information
g            Standard 10CFR430)
Plumbin      C. Insulate all hot water lines with a minimum of 1”       4      Installer certified &
g            insulation.                                                       product information
             D. Install heat trap on cold and hot water lines to        3      Installer certified &
Plumbin      and from the water heater (if not integral to the water           product information
g            heater).
             E. Install manifold plumbing system with parallel          5      Plumbing plan
Plumbin      piping configuration (aka “home run”) using smallest
g            diameter piping allowed by code.
             Safety Notice: there are energy and water
             efficiencies to be gained by placing the furnace and
             water heater in conditioned space. BGNM does not
             recommend the installation of gravity vented
             appliances within the living area due to the possibility
             of carbon monoxide poisoning.
Electrical   3.3.4 Lighting and appliances
             A. Use an ENERGY STAR Advanced Lighting                    7      Product information
             Package (ALP) in home. Fixtures must energy star                  NOT just CFL bulbs
             labeled and/or be listed
Electrical   http:www.energystar.gov/ia/products
             B. Install all recessed lighting fixtures within the       7      describe insulation and
             conditioned envelope of the building, e.g., housing               attic/roof construction
Electrical   does not penetrate insulated ceiling.
             C. Install motion sensors on outdoor lighting (if not      7      product information
Electrical   credited under 3.3.4.a).
             D. Install tubular skylights in rooms without              2      note on house plans
Framing      windows.
Electrical   E. Install ENERGY STAR-labeled appliance:
Electrical   ·      Refrigerator                                        3      Product information
Electrical   ·      Dishwasher                                          3      Product information
Electrical   ·      Washing machine.                                    5      Product information
Solar        3.3.5 Renewable energy/solar heating and cooling           10
Solar        3.3.5.1 Solar space heating and cooling
             A. Use sun-tempered design: building orientation,                 Calculate glazing area
             sizing of glazing, design of overhangs to provide                 percentages
Solar        shading are in accordance with guidelines below:
Solar              Long side of the home faces within 30o of south;            orientation on plan
                   Glazing area < 7% of Finished Floor Area (FFA)              Calculate glazing area
Solar        on south face (Low-E);                                            percentages
                  Glazing area < 2% of FFA on west face (Low-E,                Calculate glazing area
Solar        Low SHGC);                                                        percentages
                  Glazing area < 4% of FFA on east face (Low-E,                Calculate glazing area
Solar        Low SHGC);                                                        percentages
                   Glazing area < 4% of FFA on north face (Low-                Calculate glazing area
Solar        E);                                                               percentages
                  Skylights less than 2% of Finished Ceiling Area,             Calculate glazing area
Solar        with shades and insulated wells;                                  percentages
     12                                              6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
                Overhangs designed to provide shading on                    describe overhangs
          south-facing glass (at a minimum), or adjustable                  installed
          canopies or awnings. (See Users Guide for charts
          that indicate length of overhang, amount and period
Solar     of shading according to latitude.)
          B. Use passive solar design: sun-tempered design           10     Builder Spec sheet
          as above plus additional south-facing glazing,                    identifying passive solar
          appropriately designed thermal mass to prevent                    design features
          overheating, and provision for air flow to adjoining
Solar     rooms.
                Sun-tempered design as outlined above except                documentation of design
          additional glazing permitted on south wall PLUS                   or design signed by
Solar                                                                       professional
               For any room with south-facing glazing > 7% of               Calculate glazing area
Solar     FFA, properly sized thermal mass, and                             percentages
                Provision for forced air flow to adjoining areas            describe air flow
Solar     as needed.                                                        provisions
                (SBIC Passive Solar Design Guidelines for your
Solar     climate should be referenced to size thermal mass.)
          Note: 3.3.5.1.A must also be done in order to
Solar     receive points for 3.3.5.1.B.
Solar     C. Use passive cooling.                                    8
                Exterior shading on east and west windows,                  list sources of shading
          e.g., shade trees, moveable awnings or louvers,
Solar     covered porches
                Overhangs designed to provide shading on                     Awnings need to cover
          south-facing glazing. (Use supplied charts that                    south facing windows
          indicate length of overhang, amount and period of
          shading according to latitude.) (Not to be double-
Solar     counted if credited in 3.3.5.1.A above.)
Solar           Windows located to facilitate cross ventilation.
               Solar reflective roof or radiant barrier in hot              product information
Solar     climates.
          Note: All of the above must be done in order to
Solar     receive points for this line item.
Solar     3.3.5.2 Solar water heating
          A. Install solar water heating system. Must use                   product information
Solar     SRCC rated system. Solar fraction:
Solar     1.     0.3                                                 8
Solar     2.     ≥ 0.5                                               10
Solar     3.3.5.3 Additional renewable energy options
          A. Supply electricity needs by onsite renewable                   Installer certified &
          energy source such as photovoltaics, wind or hydro                product information
          whereby the system is estimated to produce the
Solar     following kWh per year:
Solar     2,000 to 3,999                                             8
Solar     4,000 to 5,999                                             10
Solar     6,000 +                                                    12
          (Equipment should carry all applicable IEEE and UL
          certifications. Installation shall be in accordance with
Solar     local utility and electrical code requirements.)
          B. Provide clear and unshaded roof area (+/-30°of                 Building specifications
          south or flat) for future solar collector or
          photovoltaics. Minimum area of 200 sf. Provide a
Solar     rough-in of piping from the roof to the utility area:
Solar     ·      Conduit                                             3
Solar     ·      Insulated piping                                    5
Testing   3.3.6 Verification
          3.3.6.1 Conduct onsite third party inspection to verify
Testing   installation of energy related features such as:
          A. ResNet Insulation Inspection                            8      2 onsite inspections by
                                                                            Third Party (rough in
Testing                                                                     and final)
          B. Energy Star Thermal bypass Inspection                   8      Thermal Bypass
Testing                                                                     Inspection by Third
          (When at least 100 homes of the same model are to                 Party
          be built by the same builder, a representative sample
Testing   (15%) of homes may be inspected.)
          3.3.6.2 Conduct third party testing to verify                     Third Party report
          performance, e.g., blower door, duct leakage testing,             showing results of
Testing   flow hood testing, (per test).                                    testing
          A. Building envelope leakage: blower door test             8      Blower Door test results
Testing   results < 0.35 ACHnat
          B. Central HVAC duct leakage: duct leakage test            8      Duct Blast test results
Testing   results:
    13                                            6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
           · Leakage to unconditioned space < 5% of rated
Testing    blower capacity.
Testing    · Total leakage < 10% of rated blower capacity.
Testing    C. Balanced HVAC air flows: flow hood test results:     8       Flow Hood Test results
           · Measured flow at each supply and return register
Testing within 25% of design flow.
Testing · Total air flow within 10% of design flow
           (When multiple homes of the same model are to be
           built by the same builder, a representative sample of
           homes may be tested subject to the sampling
Testing protocol.)
HVAC       3.3.7 Innovative options
HVAC       A. Install drain water heat-recovery system.            2       product information
           B. Install desuperheater in conjunction with ground     6       product information
HVAC       source heat pump.
           C. Install heat pump water heater. Must be rated        6       product information
           according to the current US DOE test standard and
HVAC       shall have an EF > 1.7.
           D. Install occupancy sensors for lighting control.      4       product information
Electrical (Points per sensor.)
           BRONZE MINIMUM = 37
           SILVER MINIMUM = 62
           GOLD MINIMUM = 100
           TOTAL SECTION 3 POINTS




     14                                          6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
           Property Address:
           Builder:




           Section 4
                                                                     PTS         PTS      Acceptable           Explain in detail how criteria was met and/or
Plumbin    Water Efficiency                                         AVAIL      CLAIMED   Documentation                note attached documentation.
g          4.1 Indoor/Outdoor Water Use
Plumbin    4.1.1 Hot water delivery to remote locations aided by      6
g          installation of:
Plumbin    A. On-demand water heater at point of use served                              Product / Installer
g          by cold water only. (Points per unit installed)                               Information
Plumbin    B. Control-activated recirculation system.                                    Product / Installer
g                                                                                        Information
Plumbin  4.1.2 Water heater located within 30 feet pipe run of           9               Floor plan
g        all bathrooms and kitchen.
                             ®                                        7 per              Product / Installer
Plumbin 4.1.3 Energy Star water-conserving appliances
g        installed, e.g., dishwasher, washing machine.              applianc             Information
Plumbin 4.1.4 Water efficient showerhead using conventional             e.               Product / Installer
g        aerator or venturi technology for flow rate < 2.5 gpm.                          Information
         100% of showerheads                                             8
         or                                                             or
         per-fixture (maximum of 3 fixtures)                          2 per
                                                                     fixture
Plumbin 4.1.5 Water-efficient sink faucets/aerators < 2.2                                Product / Installer
g        gallons/minute.                                                                 Information
         100% of fixtures                                                8
         or                                                             or
         per-fixture (maximum of 3 fixtures)                          2 per
                                                                     fixture
Plumbin 4.1.6 Ultra low flow toilets installed:                                          Product / Installer
g
Plumbin                                                                                  Information
g        A. Power-assist
                 100% toilets power assist                              12
         or                                                             or
Plumbin          Per-toilet (maximum 8 points)                         4 ea
g        B. Dual flush.
                 100% toilets dual flush                                18
         or                                                             or
                 Per-toilet (maximum 12 points)                        6 ea
         C. <1.3 GPF
                 100% toilets ultra low flow                             9
         or                                                             or
                 Per-toilet (maximum 6 points)                         3 ea
         4.1.7 Low-volume, non-spray irrigation system                   7               Landscape Plan/
         installed, e.g., drip irrigation, bubblers, drip emitters,                      Landscaping
Sitework soaker hose, stream-rotator spray heads.                                        contract
         4.1.8 Irrigation system zoned separately for turf and           6               Landscape Plan/
         bedding areas, or retain the natural landscape.                                 Landscaping
Sitework                                                                                 contract
         4.1.9 Weather-based irrigation controllers, e.g.,               7               Product
         computer-based weather record.                                                  information verify
                                                                                         system uses
                                                                                         weather records
                                                                                         or moisture
                                                                                         sensors, not just
Sitework                                                                                 a timer
         4.1.10 Collect and use rainwater as permitted by             9                  Product
         local code. (Additional credit for distribution system                          Information/descr
Sitework that uses a renewable energy source or gravity.)                                ibe system
         4.1.11 Innovative wastewater technology as                   7                  Submit plan
Plumbin permitted by local code, e.g., constructed wetland,                              approved by
g
Plumbin sand filter, and aerobic system.                                                 local code
g        4.2 Innovative options
         4.2.1 Shut-off valve, motion sensor, or pedal-               6                  Product
         activated faucet to enable intermittent on/off                                  Information- must
         operation.                                                                      be hands free
                                                                                         controls or
Plumbin                                                                                  sensors on all
g                                                                                        faucets


     15                                         6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
        4.2.2 Separate and re-use greywater as permitted by    6          Product
Plumbin local code.                                                       Information
g                                                                         installer certified
        4.2.3 Composting or waterless toilet as permitted by   6          Product
Plumbin local code.                                                       Information
g                                                                         installer certified
        BRONZE MINIMUM = 30
        SILVER MINIMUM = 40
        GOLD MINIMUM = 50
        TOTAL SECTION 4 POINTS                                      0




    16                                      6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
          Property Address:
          Builder:



          Section 5
                                                                   PTS      PTS      Acceptable         Explain in detail how criteria was met and/or
HVAC      Indoor Environmental Quality                            AVAIL   CLAIMED   Documentation              note attached documentation.
HVAC      5.1 Minimize potential sources of pollutants
          5.1.1 For vented space heating and water heating          8
HVAC      equipment:
          A. Install direct vent equipment.                                         Builder spec
HVAC                                                                                sheet
HVAC      Or
          B. Install induced/mechanical draft combustion
HVAC      equipment.
          5.1.2 Install space heating and water heating             6               House Plans
          equipment in isolated mechanical room or closet                           and spec sheet
          with an outdoor source of combustion and ventilation
          air. Safety Notice: there are energy and water
          efficiencies to be gained by placing the furnace and
          water heater in conditioned space. BGNM does not
          recommend the installation of gravity vented
          appliances within the living area due to the
Design possibility of carbon monoxide poisoning.
          5.1.3 Install direct-vent, sealed-combustion gas          6               Builder spec
Design fireplace, sealed wood fireplace, or sealed                                  sheet
Design Or
Design No fireplace or woodstove installed.                                         House Plans
          5.1.4 Ensure a tightly-sealed door in between the         9               Building
          garage and living area and provide continuous air                         Specifications
          barrier between garage and living areas including air
Finishworksealing penetrations, walls, ceilings, and floors.
          5.1.5 Ensure particleboard, medium density                6               Product
          fiberboard (MDF) and hardwood plywood substrates                          Information/ list
          are certified to low formaldehyde emission standards                      of low-
          ANSI A208.1, ANSI A208.2 and ANSI/HPVA HP1,                               formaldehyde
          respectively. Composite wood/agrifiber panel                              products used
          products must either                                                      manufacturer
Finishwork                                                                          spec sheet
          5.1.6 Install carpet, carpet pad, and floor covering      6               List of products
          adhesives that hold “Green Label” from Carpet and                         used
          Rug Institute‟s indoor air quality testing program or                     manufacturer
Finishworkmeet equivalent thresholds verified by a third party.                     spec sheet
          5.1.7 Mask HVAC outlets during construction and           5               Contract with
          vacuum ducts, boots, and grilles before turning on                        HVAC contractor
HVAC      central heating/cooling system.
          5.1.8 Use low VOC emitting wall finishes like             3               List of products
          interior plaster, wallpaper, etc. (except paint, see                      used
          section 7).                                                               manufacturer
Finishwork                                                                          spec sheet
          5.2 Manage potential pollutants generated in the
          home
HVAC      5.2.1 Vent kitchen range exhaust to the outside.          7               House Plans
          5.2.2 Provide mechanical ventilation at a rate of 7.5                     Product
          cfm per bedroom + 7.5 cfm and controlled                                  information and
          automatically or continuous with manual override.                         spec sheet
          The ventilation equipment may be:                                         (should also
                                                                                    include guidance
                                                                                    in Homeowners
HVAC                                                                                Manaul)
          A. Exhaust or supply fan(s), or                           7               Product
HVAC                                                                                Information
          B. Balanced exhaust and supply fans, or                   9               Product
HVAC                                                                                Information
          C. Heat-recovery ventilator, or                          10               Product
HVAC                                                                                Information
          D. Energy-recovery ventilator                            10               Product
HVAC                                                                                Information




     17                                       6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
             5.2.3 Install MERV 9 filters on central air or              3        Product
             ventilation systems.                                                 information and
                                                                                  spec sheet
                                                                                  (should also
                                                                                  include guidance
                                                                                  in Homeowners
HVAC                                                                              Manaul)
             5.2.4 Install humidistat to control whole-house             4        Product
             humidification system.                                               information and
                                                                                  spec sheet
                                                                                  (should also
                                                                                  include guidance
                                                                                  in Homeowners
HVAC                                                                              Manaul)
             5.2.5 Install sub-slab de-pressurization system or          6        Product
             infrastructure to facilitate future installation of radon            Information/
             mitigation system. *The more stringent requirement                   Photographs
             between a local building code and this provision
HVAC         shall apply.
             5.2.6 Verify all exhaust flows meet design                  9        Flow Hood Test
HVAC         specifications
             5.3 Moisture management (vapor, rainwater,
             plumbing, HVAC)
             5.3.1 Control bathroom exhaust fan with a timer or          6        Product
Electrical   humidistat.                                                          Informatioin
             5.3.2 Install moisture resistant backerboard – not          6        list product(s)
             paper-faced sheathing – under tiled surfaces in wet                  used
Drywall      areas.
             5.3.3 Install vapor retarder directly under slab (6-mil)    9        list product(s)
             or on crawl space floor (8-mil). In crawl spaces,                    used
             extend poly up wall and affix with glue and furring
             strips, or damp- proof wall below grade. Joints
Concrete     lapped 12 inches.
             5.3.4 Protect unused moisture-sensitive materials           6        Refer to
             from water damage through just-in-time delivery,                     Moisture
             storing unused materials in a dry area, or tenting                   Management
Framing      materials and storing on a raised platform.                          Plan
             5.3.5 Keep plumbing supply lines out of exterior            5        House Plans
Plumbing     walls.
             5.3.6 Insulate cold water pipes in unconditioned            4        pumbing
             spaces with ½” insulation or other coating that                      contract/
Plumbing     comparably prevents condensation.                                    photographs
             5.3.7 Insulate HVAC ducts, plenums, and trunks in           4        Building
             unconditioned basements and crawl spaces to avoid                    Specifications/
             condensation.                                                        HVAC contractor
HVAC                                                                              agreement
        5.3.8 Check moisture content of wood before it is                4        Refer to
        enclosed on both sides. Ensure moisture content of                        Moisture
        subfloor/substrate meets the appropriate industry                         Management
Framing standard for the finish flooring material to be                           Plan
        installed.
        5.4 Innovative options
        BRONZE MINIMUM = 32
        SILVER MINIMUM = 54
        GOLD MINIMUM = 72
        TOTAL SECTION 5 POINTS                                               0




     18                                             6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
         Property Address:
         Builder:




         Section 6
                                                                    PTS   PTS     Acceptable        Explain in detail how criteria was met and/or note
         Operation, Maintenance, and Homeowner Education
                                                AVAIL CLAIMED Documentation                                     attached documentation.
         6.1 Provide Home Manual to owners/occupants                 9          Complete Copy
         on the use and care of the home. Manual must                           of Home
Manual   include all items below:                                               Owner's Manual
         A. Narrative detailing the importance of maintenance                    A - I should be
         and operation to keep a green built home green                         address in
Manual                                                                          manual
Manual   B. Local Green Building Program certificate.
         C. Warranty, operation, and maintenance
Manual   instructions for equipment and appliances
Manual   D. Household recycling opportunities
         E. Information on how to enroll in a program so that
         the home receives energy from a renewable energy
Manual   provider
         F. Explanation of the benefits of using compact
Manual   fluorescent light bulbs in high usage areas
         G. A list of habits/actions to optimize water and
Manual   energy use
Manual   H. Local public transportation options (if applicable)
         I. Clearly labeled diagram showing safety valves and
Manual   controls for major house systems.
         6.2 Optional information to include in the Home                        Information to be
         Manual                                                                 included in
                                                                                Home Owner's
Manual                                                                          Manual
Manual   (Choose at least 5)
         A. A list of local service providers that focus on          2
         regularly scheduled maintenance and proper
         operation of equipment and the structure (sealants,
         caulks, gutter and downspout system; shower/tub
Manual   surrounds, irrigation systems, etc).
         B. A photo record of framing with utilities installed.
         Photos should be taken prior to installing insulation,
Manual   clearly marked, and provided in homeowner‟s
         manual. Green Home Building Guidelines items
         C. List of
Manual   included in the home.
Manual   D. User-friendly maintenance checklist
         E. Instructions for proper handling and disposal of
Manual   hazardous materials.
         F. Information on organic pest control, fertilizers, de-
Manual   icers and cleaning products.
Manual   G. Information about native or low-water landscape
         H. Information on how to keep a home‟s relative
Manual   humidity in the range of 30-60%
         I. Instructions for checking crawlspace for termite
Manual   tubes periodically
         J. Instructions for keeping gutters clean. Instructions
         should note that downspouts should divert water at
Manual   least five feet away from foundation
         6.3 Provide education to owners/occupants in the
Manual   use and care of their dwellings.
         A. Instruct homeowner/occupants about the                   7          Describe best
         building‟s goals and strategies and occupant‟s                         practice
         impacts on costs of operating the building. Provide                    implementation
         training to owners/occupants for all control systems
Manual
         in the house.
Manual   6.4 Solid waste
         A. Encourage homeowners/occupants to recycle by             1          House plans
         providing built-in space in the home‟s design (e.g.,
         kitchen, garage, covered outdoor space) for recycling
Manual   containers.
         6.5 Innovative options
         BRONZE MINIMUM = 7
         SILVER MINIMUM = 7
         GOLD MINIMUM = 9
         TOTAL SECTION 6 POINTS                                            0




    19                                                 6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls
           Property Address:
           Builder:




           Section 7
                                                                     PTS      PTS    Acceptable        Explain in detail how criteria was met and/or
           Global Impact                                            AVAIL   CLAIMED Documentation             note attached documentation.
Finishwork 7.1 Products
           7.1.1 Product manufacturer‟s operations and                3             List
           business practices include environmental                                 manufacturers
           management system concepts (the product line,                            & provide ISO
           plant, or company must be ISO 14001 certified)                           14001
Finishwork                                                                          Certification
           7.1.2 Choose low- or no-VOC indoor paints. VOC             6             Manufacturer
           concentrations (grams/liter) of interior paints should                   spec sheet with
           be equal to or less than those specified by the                          VOC content
Finishwork EPA‟s Environmentally Preferable Purchasing
Finishwork Program:
           ·Interior latex coatings: Flat: 100 grams/liter
Finishwork                           Non-flat: 150 grams/liter
Finishwork · Interior oil-based paints: 380 grams/liter
           7.1.3 Use low VOC sealants. VOC concentrations             5             Product
           for construction adhesives and sealants should meet                      Information with
           the limits specified in the California Air Resources                     VOC content
           Board Regulation for Reducing Volatile Organic
Finishwork Compound Emissions from Consumer Products:
                  ·Construction adhesives: the greater of 15% by
Finishwork weight or 200 grams/liter
                  ·Sealants and caulks: the greater of 4% by
Finishwork weight or 60 grams/liter
                 ·Contact adhesives: the greater of 80% by
Finishwork weight or 650 grams/liter
           7.2 Innovative options
           7.2.1 Builder‟s operations and business practices          4             Builders ISO
           include environmental management system                                  14001
Finishwork concepts (the builder must be ISO 14001 certified)                       Certification
           BRONZE MINIMUM = 3
           SILVER MINIMUM = 5
           GOLD MINIMUM = 6
           TOTAL SECTION 7 POINTS                                              0




     20                                       6/17/2011faa1db16-20d9-4a6d-83d1-7e6172e58938.xls

				
DOCUMENT INFO
Description: Geothermal Service Contract document sample