Reflector Assembly and Installation

Document Sample
Reflector Assembly and Installation Powered By Docstoc
					                                            Reflector Assembly
                                             and Installation
                  Parts List                               (27 RD Reflector)

        Backhaul Module with Reflector (BHRF)                             Tools Needed                           http://www.motorola.com/canopy
                                                               7/16 inch wrench or adjustable wrench.            Sales Support: 866-515-5825
            Subscriber Module with Reflector (SMRF)
                                                               Flat blade screwdriver or 5/16 inch socket        Technical Support: 888-605-2552 (+1 217 824 9742)
               Reflector (only) (27RD)
                                                                 for hose clamps.
                                                               1/2 inch wrench for U-Bolts - Backhaul only.
√   √     √                              Module Arm



                                                                                                1
√   √     √             Hose Clamps

√   √     √            Dish

√   √     √
                         Carriage Bolts
√   √     √
                            Bolts
√   √     √             Nuts
√   √     √             Lock Washers
√   √     √                 Flat Washers


                           Elevation
√   √     √                Assembly                                                                Set on table or other
                                                                                                   convenient surface.
√   √     √                 Elevation Adjuster
√   √     √           Bracket                                                                      Bolt Module Arm to Dish
√   √     √           Carriage Bolt
√   √     √           Nut
√   √     √                                                                                                                                                          Ins
                                            Support Arm
                                                                                                                                                                     on

√                                      U-Bolts                                                                                                                       Fo
                                                                                                                                                                     us

√
√
√                      Bolts
                                         V-Bracket
                                         Spreader Plates
                                                                                         2                                                                           Fo
                                                                                                                                                                     Mo
                                                                                                                                                                     ap
√                      Lock Washers
√                      Flat Washers                                                                                                                                  (la
                                                                                                                                                                     de
                                                                       Connect Elevation Adjuster and Bracket to Elevation Assembly
√   √                                        Canopy Module                                                                                              Page 1 of 2 Ad
                                                                       using existing nut, washer, and bolt, and additional carriage bolt and nut.
                                                                                                                                                        27RD A&I
                                                                       Tighten snug, but not fully tight.                                               Rev 4       to
                                                                                                                                                 1. Loosen bolts on
                                                                                           Elevation
                                                                                                                                                    collar of Elevation
                                                                                           Adjuster
                                                                                                                                                    Assembly.


                  3                                  Connect with 4 bolts,
                                                     8 flat washers,
                                                                                      4                                                          2. Insert Support Arm.

                                                                                                                                              3. Us
                                                     4 lock washers,                                                                                ew
                                                     and 4 nuts.                                                                                until rench on
                                                                                                                                                     arms       E
                                                     Tighten securely.                                                                                    are p levation
                                                                                                                                                               aralle    Adju
                                                                                                                                                                      l.      ster
2)

                                                                                                                                                                   4. Then remove
                                                                                                                                                                      Support Arm.


                                               No
                                               Gap



                        Tighten hose clamps
                        until Module
                        is fully seated
                        in tube indentation.


                                                                    1. Install reflector
                                                                       on Support Arm.

                                                                    2. Adjust aim
                                                                                                6                                                                            Misaimed!

             5                                                         vertically
                                                                       and horizontally,
                                                                       then tighten
                                                                       all bolts.
                                                                                                                                                               Wrong
     Install Support Arm                                                                                                                                       Angle!
     on tower or building.
                             Vertical, Plumb




     For Backhaul,                                                    Correct




                                                                                                  then adjust as required
     use provided U-Bolts.

     For Subscriber



                                                                                                                            Vertical, Plumb
     Module, use locally                                                                          Vertical, Plumb
     approved fasteners
     (lag bolts, screws, etc.)
     depending on installation.
f 2 Adjust Support Arm                                                                                                                                                         Page 2 of 2
                                                                                                                                                                               27RD A&I
    to be vertical and plumb.                                                                                                                                                  Rev 4

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:9
posted:6/10/2011
language:English
pages:2