Get documents about "WILTON DRILLING
Document Sample
Belt Drive Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Variable Speed Drill Presses . . . . . . . . . . . . . . . . . . . . . . 94
WILTON DRILLING
Geared Head Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . 97
Direct Drive Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . 101
Radial Arm Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . 103
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
15" AND 20" DRILL PRESSES DRILLING
WILTON DRILLING
2530 2500 2550
15" AND 20" DRILL PRESSES
• Cast iron head STANDARD EQUIPMENT
• Large quill allows greater accuracy • 5/8" Drill chuck and arbor
• Head casting features a permanently lubricated ball bearing spindle assembly, using
four heavy duty ball bearings mounted in an enclosed quill for extended life
• Massive T-slotted production work table (Model 2550 only)
• Table tilts 45°
• Large ground steel column diameter for maximum head and table support
• 3-3/8" stroke for deep hole applications
• Accurate depth stop for precise hole depths
STOCK NUMBER 2530 2500 2550
Type 15" Bench 15" Floor 20"Floor
Drills to Center of Circle (in.) 15 15 20
Cast Iron Drilling Capacity (max./in.) 5/8 5/8 3/4
Steel Drilling Capacity (max./in.) 1/2 1/2 5/8
Quill Diameter (in.) 1-7/8 1-7/8 2-1/4
Quill Travel (in.) 3-3/8 3-3/8 4-3/4
Spindle Taper 2 MT 2 MT 3 MT
12 (250, 340, 390, 510, 600, 650, 990, 12 (250, 340, 390, 510, 600, 650, 990, 12 (150, 260, 300, 440, 490, 540, 1150,
Number & Range of Spindle Speeds (RPM)
1550, 1620, 1900, 2620, 3100) 1550, 1620, 1900, 2620, 3100) 1550, 1840, 2220, 2950, 4200)
Overall Table Size (in.) 10 x 10 10 x 10 18-1/2 x 16-1/2
Table Working Surface (in.) 10 x 10 10 x 10 14 x 16
T-slot Number & Size (in) N/A N/A 3 & 1/2
Column Diameter (in.) 2-7/8 2-7/8 3-5/8
Base Size (in.) 11 x 18-1/2 11 x 19-1/2 22-3/4 x 17-3/4
Spindle to Base (in.) 24-1/2 48-3/4 43-1/2
Motor 3/4HP, 115V, 1Ph, 1725 RPM 3/4HP, 115V, 1Ph, 1725 RPM 1-1/2HP, 115V, 1Ph, 1725 RPM
Floor Space Required (in./L x W x H) 26 x 13-3/8 x 39 26 x 13-3/8 x 63-1/2 34 x 21 x 67
Net Weight (lbs.) 157 185 321
*Capacities for continuous production use will vary based on application
92
DRILLING 15" 6- SPEED DRILL PRESSES
15" 6-SPEED DRILL PRESSES
• Constructed to provide a solid base for drilling
• Offers a greater range in spindle speeds than others in this class
• Larger quill provides greater accuracy
• Large production work table give the operator the room to work
and support for the job
• 3" Column for head support, while the quill is also supported to
lessen deflection
STANDARD EQUIPMENT
• 1/2" Drill Chuck and arbor
WILTON DRILLING
STOCK NUMBER A3816 A3836
Type 15" Floor 15" Bench
Drills to Center of Circle (in.) 15 15
Cast Iron Drilling Capacity (in.) 5/8 5/8
Steel Drilling Capacity (in.) 1/2 1/2
Quill Diameter (in.) 2-1/4 2-1/4
Spindle Travel (in.) 6 6
Number of Spindle Speeds 6 6
375, 625, 1125, 375, 625, 1125,
Spindle Speeds (RPM)
1950, 3400, 5000 1950, 3400, 5000
Table Overall/Table 15-1/4 x 17-3/4/ 14-1/4 x 12-3/8 /
Working Surface (in.) 12-1/2 x 14-1/2 10-5/8 x 12-3/8
T-slot Number & Size (in.) 2 & 1/2 2 & 1/2
Spindle to Table (in.) 41
Spindle to Base (in.) 47-1/2 11
Overall Height (in.) 67-1/2 36-1/2
Spindle Taper 2 MT 2MT
Column Diameter (in.) 3 3
Table Capacity (max./lbs.) 100 100
1HP, 115/230V, 1Ph 1HP, 115/230V, 1Ph
Motor
Prewired 115V Prewired 115V
Floor Space Required (in./L x W x H) 30 x 20 x 71 A3816
Net Weight (lbs.) 394 375
93
15" VARIABLE SPEED DRILL PRESSES DRILLING
15" VARIABLE SPEED DRILL PRESSES
• Speeds from 400 to 5,000 RPM
• Handwheel adjustment sets the speeds
• Large 2-1/4" quill allows greater accuracy
• 3" column diameter for maximum head support
• Full bearing support on quill for maximum spindle stiffness
• 6" stroke for deep hole applications
• Accurate depth stop for precise hole depths
• 1/2" Drill chuck and arbor
• Safety collar
WILTON DRILLING
A5816
STOCK NUMBER A5816/A5818 A5836/A5838
Type 15" Floor 15" Bench
Drills to Center of Circle (in.) 15 15
Cast Iron Drilling Capacity (max./in.) 5/8 5/8
Steel Drilling Capacity (max./in.) 1/2 1/2
Column Diameter (in.) 3 3
Quill Diameter (in.) 2-1/4 2-1/4
Spindle Taper 2 MT 2 MT
Spindle Travel (in.) 6 6
Spindle Speeds (RPM) 400 to 5000 400 to 5000
Overall Table Size (in.) 15-1/4 x 17-3/4 14-1/4 x 21
Table Working Surface (in.) 12-1/2 x 14-1/2 10-5/8 x 12-3/8
T-slot Number & Size (in.) 2 & 1/2 2 & 1/2
Spindle to Table (in.) 41
Spindle to Base (in.) 47-1/2 11
Overall Height (in.) 67-1/2 36-1/2
1 HP, 115/230V, 1Ph, 1 HP, 115/230V, 1Ph, Prewired
Motor A5816/A5836
Prewired 115V 115V
1HP, 230/460V, 3Ph, 1HP, 230/460V, 3Ph, Prewired
Motor A5818/A5838
Prewired 230V 230V
Floor Space Required (in./L x W x H) 30 x 20 x 71
A5836
Net Weight (lbs.) 426 336
*Capacities for continuous production use will vary based on application
94 wiltontool.com
DRILLING 20" VARIABLE SPEED DRILL PRESSES
20" VARIABLE SPEED DRILL PRESSES
• Variable spindle speeds from 300 to 2000 RPM
• External #3 Morse Taper
• Front mounted positive control depth stop
• 6" quill travel
• Massive 3" quill diameter
• Heavy duty cast iron design
• Large precision ground T-slot production table for easy set ups
• Front or side rack and worm gear table raiser
• Table rotates 360° around the column
• Machined T-slotted base
• Head is massively constructed for more accuracy and rigidity
WILTON DRILLING
STOCK NUMBER 2221VS 2223VS
Drills to Center of Circle (in.) 20 20
Cast Iron Drilling Capacity (in.) 1-1/4 1-1/4
Steel Drilling Capacity (in.) 1 1
Column Diameter (in.) 4-1/2 4-1/2
Range of Spindle Speeds (RPM) 300 to 2000 300 to 2000
Distance Spindle to Column (max./in.) 10-7/16 10-7/16
Distance Spindle to Table (in.) 32-3/8 32-3/8
Spindle Travel (in.) 6 6
Spindle Taper 3 MT 3 MT
Quill Diameter (in.) 3 3
Table Size (in.) 18-1/8 x 14-3/4 18-1/8 x 14-3/4
T-slot Number & Size (in.) 2 & 5/8 2 & 5/8
Table Travel (in.) 32-3/8 32-3/8
Base Working Surface (in.) 15-1/4 x 12-1/16 15-1/4 x 12-1/16
Base Slots Number & Size (in.) 2 & 5/8 2 & 5/8
2HP, 115/230V, 1Ph, 2HP, 230/460V, 3Ph,
Motor for 2221VS OPTIONAL EQUIPMENT STOCK NUMBER
Prewired 115V Prewired 230V
Floor Space Required (in./L x W x H) 34-1/4 x 27 x 77-1/4 34-1/4 x 27 x 77-1/4 Coolant system, 1/8HP pump, 115/220V, 1Ph 5512104
Net Weight (lbs.) 715 715 Coolant system, 1/8HP pump, 220/440V, 3Ph 5508071
* Capacities for continuous production use will vary based on application Jacob's chuck, 3/16"–3/4", keyed with #3 arbor 5108010
95
ELECTRONIC VARIABLE SPEED DRILL PRESSES DRILLING
ELECTRONIC VARIABLE SPEED DRILL PRESSES
• Variable spindle speeds from 65 to 2000 RPM
• #3 Morse taper spindle
• Latest AC inverter variable speed technology
• High torque at all speeds both forward and reverse
• Continuous speed adjustment while in operation
• Front mounted LED spindle RPM readout
• Forward and reverse for tapping
• Emergency stop
• Front mounted positive control depth stop
• Large precision ground T-slot production table for easy set ups
• Head is massively constructed for more accuracy and rigidity
WILTON DRILLING
STOCK NUMBER 2232AC 2234AC
Drills to Center of Circle (in.) 20 20
Cast Iron Drilling Capacity (in.) 1-1/2 1-1/2
Steel Drilling Capacity (in.) 1-3/8 1-3/8
Quill Diameter (in.) 3 3
Distance Spindle to Column (in.) 10-7/16 10-7/16
Distance Spindle to Table (max./in.) 32-3/8 32-3/8
Spindle Speeds (RPM) 65 to 2000 65 to 2000
Spindle Travel (in.) 6 6
Spindle Taper 3 MT 3 MT
Quill Travel (in.) 6 6
Column Diameter (in.) 4-1/2 4-1/2
Table Working Surface (in.) 18-1/8 x 14-3/4 18-1/8 x 14-3/4
T-slot Number & Size (in.) 2 & 5/8 2 & 5/8
Table Travel (in.) 32-3/8 32-3/8
Table Overall Size (in.) 22 x 18-3/4 22 x 18-3/4
OPTIONAL EQUIPMENT STOCK NUMBER
Base Working Surface (in.) 15-1/4 x 12-1/16 15-1/4 x 12-1/16
Coolant system, 1/8HP pump, Base Slots Number & Size (in.) 2 & 5/8 2 & 5/8
5508071
220V/440V, 3Ph Overall Base Size (in.) 27-2/4 x 20 27-2/4 x 20
Coolant system, 1/8HP pump, Motor 2HP, 230V, 3Ph 2HP, 460V, 3Ph
5512104
115V/220V, 1Ph
Floor Space Required (in./L x W x H) 37 x 27 x 82-1/4 37 x 27 x 82-1/4
Jacob's chuck, 3/16"–3/4",
5108010 Net Weight (lbs.) 792 792
keyed with #3 arbor
96 wiltontool.com
DRILLING 20" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
20" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
• Helical gears for smooth, quiet operation
• Quick release drill ejector
• Safety latch to prevent head dropping when unclamped
• Eight spindle speeds
• T-Slotted table with coolant trough
• Head and table rotate 360° around column
• 2 position, High/Low switch
• 3-15/16" Column diameter
• English/Metric depth gauge
WILTON DRILLING
A2608-1/ A2608-2/ A2608M-PF2/
STOCK NUMBER
A2608-4 A2608M-PF4
Drills to Center of Circle (in.) 20 20
Drilling Capacity Mild Steel (in.) 1-1/4 1-1/4
Tapping Capacity Mild Steel (in.) 1/2 1/2
Column Diameter (in.) 3-15/16 3-15/16
Distance Spindle to Table (max./in.) 35-5/8 35-5/8
Spindle Taper 3 MT 3MT
8 (130, 260, 420, 840, 535, 8 (130, 260, 420, 840, 535,
Spindle Speeds (RPM)
1070, 1745, 3480) 1070, 1745, 3480)
Quill Feed Manual Power Feed
Quill Feed Rates (IPR) N/A (.004, .006, .009, .012)
Quill Travel (in.) 5-1/8 5-1/8
Quill Diameter (in.) 2-3/8 2-3/8
Vertical Movement of Drill Head 8-5/8 8-5/8 A2608M-PF2
Table Size (in.) 15-3/4 x 19-3/4 15-3/4 x 19-3/4
T-slot Number & Size (in) 2 & 9/16 2 & 9/16
OPTIONAL EQUIPMENT STOCK NUMBER
Table Weight Capacity (lbs.) 350 350
Keyless drill chuck and arbor KDC130-MT3
Vertical Movement of Table (in.) 24-1/2 24-1/2
Jacobs drill chuck, key and arbor 5108010
Motor for A2608-1 (2 speed) 3/4 to 1HP, 115V, 1Ph
Foot operated start/stop switch 5245631A
Motor for A2608-2 (2 speed) 1 to 1-1/2HP, 220V, 3Ph 1 to 1-1/2HP, 220V, 3Ph
Flanged Quill 2G08459
Motor for A2608-4 (2 speed) 1 to 1-1/2HP, 440/460V, 3Ph 1 to 1-1/2HP, 440/460V, 3Ph 5-speed forward/reverse switch* 1820061
Floor Space Required (in./L x W x H) 24 x 22 x 72 24 x 22 x 72 Foot reversing switch* 5245631
Net Weight (lbs.) 475 600 * 3 phase machines only
97
25" WILTON/ARBOGA GEAR HEAD DRILL PRESSES DRILLING
25" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
• Helical gears for smooth, quiet operation
• Quick release drill ejector
• English/Metric depth gauge
• T-Slotted table and base with coolant trough
• Automatic feed control buttons located on feed levers
• Electro-magnetic clutch power feed
• Head and table rotate 360° around column
• No-volt release prevents spindle start when power returns
after shut down
WILTON DRILLING
STOCK NUMBER A3808M-PF2 A3808M-PF4
Drills to Center of Circle (in.) 25 25
Drilling Capacity Mild Steel (in.) 1-3/8 1-3/8
Tapping Capacity Mild Steel (in.) 3/4 3/4
Column Diameter (in.) 4-15/16 4-15/16
8(90, 190, 320, 640, 8(90, 190, 320, 640,
Range of Spindle Speeds (RPM)
530, 1060, 1790, 3610) 530, 1060, 1790, 3610)
Spindle Taper 4MT 4MT
Quill Feed Power Feed Power Feed
Distance Spindle to Table (max./in.) 32 32
Quill Feed Rates (IPR) 4 (.004, .006, .009, .012) 4 (.004, .006, .009, .012)
Quill Travel (in.) 5-1/8 5-1/8
Quill Diameter (in.) 2-3/8 2-3/8
Vertical Movement of Drill Head (in.) 9 9
Table Size (in.) 15-3/4 x 19-1/2 15-3/4 x 19-1/2
T-slot Number & Size (in) 2 & 9/16 2 & 9/16
Table Weight Capacity (lbs.) 350 350
Vertical Movement of Table (in.) 24-1/2 24-1/2
OPTIONAL EQUIPMENT STOCK NUMBER
2-1/4 to 3HP, 220V,
Automatic spindle reverse 1T05030 Motor 2-1/4 to 3HP, 460V, 3Ph
3Ph, 2-Speed
Foot reversing switch 5245631 Floor Space Required (in./L x W x H) 26 x 23 x 71 26 x 23 x 71
Foot operated start/stop switch 5245631A Net Weight (lbs.) 640 640
98 wiltontool.com
DRILLING 26" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
26" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
• Helical gears for smooth, quiet operation
• Quick release drill ejector
• English/Metric depth gauge
• Machined, T-Slotted base plate
• Head and table rotate 360° around column
• No-volt release prevents spindle start when power returns after
shut down
• Fully enclosed spindle
WILTON DRILLING
A3008M-PF2/
MODEL NUMBER A3008-2/ A3008-4
A3008M-PF4
Drills to Center of Circle (in.) 26 26
Drilling Capacity Mild Steel (in.) 1-1/4 1-1/4
Tapping Capacity Mild Steel (in.) 5/8 5/8 A3008M-PF2
Distance Spindle to Table (max./in.) 35 35
Spindle Taper 3MT 3MT
8(90, 190, 320, 530 ,640, 1060, 8 (90, 190, 320, 530,640, 1060,
Range of Spindle Speeds (RPM)
1790, 3610) 1790, 3610)
Column Diameter (in.) 4-1/2 4-1/2
Quill Feed Manual Power Feed
Quill Feed Rates (IPR) 4 (.004, .006, .009, .012)
Quill Travel (in.) 6 6
Quill Diameter (in.) 2-7/16 2-7/16
Vertical Movement of Drill Head (in.) 9 9
Table Size (in.) 15-3/4 x 19-3/4 15-3/4 x 19-3/4
T-slot Number & Size (in) 2 & 9/16 2 & 9/16
Table Weight Capacity (lbs.) 450 450
Vertical Movement of Table 30 30 OPTIONAL EQUIPMENT STOCK NUMBER
Motor for A3008-2/ A3008M-FP2 (2 speed) 1-1/2 to 2HP, 220V, 3Ph 1-1/2 to 2HP, 220V, 3Ph Flanged Quill 1T08019
Motor for A3008-4/ A3008M-FP4 (2 speed) 1-1/2 to 2HP, 440/460V, 3Ph 1-1/2 to 2HP, 440/460V, 3Ph Automatick spindle reverse 1T05030
Floor Space Required (in./L x W x H) 28 x 24 x 72 28 x 24 x 72 Foot reversing switch 5245631
Net Weight (lbs.) 565 600 Foot operated start/stop switch 5245631A
99
26" WILTON/ARBOGA GEAR HEAD DRILL PRESSES DRILLING
26" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
• Helical gears for smooth, quiet operation
• Quick release drill ejector
• English/Metric depth gauge
• Machined, T-Slotted base plate
• Head and table rotate 360° around column
• No-volt release prevents spindle start when power returns after
shut down
• Fully enclosed spindle
• Large T-Slotted Table
WILTON DRILLING
A4008M-PF2/
STOCK NUMBER A4008-2 / A4008-4
A4008M-PF4
Drills to Center of Circle (in.) 26 26
Drilling Capacity Mild Steel (in.) 1-7/8 1-7/8
Tapping Capacity Mild Steel (in.) 1 1
Column Diameter (in.) 5-1/2 5-1/2
8 (108, 162, 240, 360, 8 (105, 162, 240, 360,
Range of Spindle Speeds (RPM)
528, 805, 1175, 1800) 528, 805, 1175, 1800)
Spindle Taper 4 MT 4 MT
Quill Feed Manual Power Feed
Quill Feed Rates (IPR) 4 (.004, .006, .009, .013 )
Quill Travel (in.) 8 8
A4008-2 Quill Diameter (in.) 2-3/4 2-3/4
Distance Spindle to Table (max./in.) 32 32
Table Size (in.) 20 x 24 20 x 24
Table Weight Capacity (lbs.) 550 550
Vertical Movement of Table (in.) 25 25
Motor for A4008-2/
3HP, 220V, 3Ph 3HP, 220V, 3Ph
A4008M-PF2
OPTIONAL EQUIPMENT STOCK NUMBER
Motor for A4008-4/
Foot operated start/stop switch 5245631A 3HP, 440/460V, 3Ph 3HP, 440/460V, 3Ph
A4008M-PF4
Automatic spindle reverse 1T05030 Floor Space Required
23 x 28 x 81 23 x 28 x 81
Foot reversing switch 5245631 (in./L x W x H)
Flanged Quill 2GO8599 Net Weight (lbs.) 700 750
100 wiltontool.com
DRILLING DIRECT DRIVE ROUND COLUMN DRILL PRESSES
DIRECT DRIVE ROUND COLUMN DRILL
PRESSES WITH MECHANICAL CLUTCH
• Two speed forward and reverse switch
• Mechanical Powerfeed clutch engagement
• Heavy duty quill and spindle
• Tempered, ground spindle with internal taper mounted in precision
bearings for maximum accuracy, minimizing deflection
• Speed and feed selectors are located on one side of the drill head for
convenience and ease of operation
• Oversized base is precision ground with T-slots for added versatility
and stability
• Spindle gear box is equipped with steel hardened, ground, shafts
and gears
• Spindle gear box is internally lubricated in a continuous oil bath for
long term smooth operation
• Tilting table, 45° left and right
• Powerfeed can be disengaged manually
STANDARD EQUIPMENT
• Automatic tool ejector
WILTON DRILLING
• Manual quill lock
• Coolant system
• Low voltage at switch
2360
STOCK NUMBER 2350 2360 2380
Drills to Center of Circle (in.) 28 30 33
Cast Iron Drilling Capacity (in.) 1-7/8 2-5/32 2-7/8
Steel Drilling Capacity (in.) 1-3/4 2 2-3/4
Cast Iron Tapping Capacity (in.) 1-3/4 2 2-3/8
Steel Tapping Capacity (in.) 1-9/16 1-3/4 2-1/8
Quill Diameter (in.) 3.228 3.465 3.78
Distance Spindle to Column (max./in.) 14 15 16-1/2
9 (82, 120, 180, 240, 354, 9 (55, 98, 156, 198, 346, 12 (42, 58, 86, 116, 154, 249, 304,
Number & Range of Spindle Speeds (RPM)
528, 678, 1026, 1524) 456, 576, 822, 1338) 412, 554, 748, 1098, 1458)
Automatic Feeds (in.) .004, .008, .012, .016 .003, .006, .010, .014 .002, .004, .006, .008, .014, .020
Spindle Travel (in.) 9 10 11
Spindle Distance to Base (in.) 49 50 51
Spindle Distance to Table (min./in.) 2.67 2-3/4 2-3/4
Spindle Distance to Table (max./in.) 30-1/2 30-1/2 30-1/2
Table Size (in.) 22 x 19 22 x 19 23-1/2 x 23-1/2
T-Slot Size (in.) 1/2 5/8 5/8
Work Table Capacity (lbs) 400 400 400
Spindle Taper 4MT 4MT 5MT
Base Slots Size (in.) 5/8 5/8 5/8
3HP, 230/460V, 3Ph 4HP, 230/460V, 3Ph 7-1/2HP, 230/460V, 3Ph
Motor
Prewired 230V Prewired 230V Prewired 230V
Floor Space Required (in./ L x W x H) 40 x 30 x 95 53 x 30 x 108 55 x 33 x 110
Net Weight (lbs) 1840 2405 3065
101
DIRECT DRIVE ROUND COLUMN DRILL PRESSES DRILLING
DIRECT DRIVE ROUND COLUMN WITH
ELECTRO-MAGNETIC CLUTCH DRILL PRESSES
• Push button control panel
• Power feed gear box fitted with an electro-magnetic clutch for power
feed engagement and overload protection
• Heavy duty quill and spindle with manual quill locking
• Tempered, ground spindle with internal taper mounted in precision
bearings for maximum accuracy, minimizing deflection
• Speed and feed selectors are located on one side of the drill head for
convenience and ease of operation
• Oversized base is precision ground with T-slots for added versatility
and stability
• Coolant tank and pump integrated into base
• Spindle gear box is equipped with steel hardened, ground, shafts
and gears
• Spindle gear box is internally lubricated in a continuous oil bath for
long term smooth operation
STANDARD EQUIPMENT
• Automatic tool ejector
• Manual quill lock
WILTON DRILLING
• Coolant system
• Low voltage at switch
2455
STOCK NUMBER 2401/2402* 2404* 2444/2445* 2455/2456* 2475/2476*
Drills to Center of Circle (in.) 28 28 30 33 33
Steel Drilling Capacity (in.) 1-3/8 1-3/4 2 2-3/8 2-3/4
Steel Tapping Capacity (in.) 1-1/2 1-9/16 1-3/4 2 2-1/8
Quill Diameter (in.) 3.228 3.228 3.465 3.465 3.78
Distance Spindle to Column (max./in.) 14 14 15 16-1/2 16-1/2
12 (42, 58, 86, 116, 154, 249,
8(112, 160, 245, 358, 9 (82, 120, 180, 354, 528, 9 (55, 98, 156, 198, 346, 12 (48, 72, 96, 144, 186, 234,
Number & Range of Spindle Speeds (RPM) 304, 412, 554, 748, 1098,
532, 762, 1164) 678, 1026, 1524) 456, 576, 822, 1338) 288, 360, 480, 804, 996, 1278)
1485)
6 (.002, .004, .006, 6 (.002, .004, .006,
Automatic Feeds (in.) 3 (.004, .007, .010) 4 (.004, .008, .012, .016) 4 (.003, .006, .010, .014)
.008, .014, .020) .008, .014, .020)
Spindle Travel (in.) 7 9 10 10 11
Spindle Distance to Base (in.) 48 49 50 51 51
Spindle Distance to Table (min./in.) 1.37 2.67 2.75 2.95 2.75
Spindle Distance to Table (max./in.) 30-1/2 30-1/2 30-1/2 30-1/2 30-1/2
Table Size (in.) 22 x 19 22 x 19 33-1/2 x 23-1/2 33-1/2 x 23-1/2 33-1/2 x 23-1/2
T-slot Number & Size (in.) 3 & 1/2 3 & 1/2 3 & 5/8 3 & 5/8 3 & 5/8
Work Table Capacity (lbs.) 575 575 575 750 750
Spindle Taper 4MT 4MT 4MT 5MT 5MT
2HP, 230/460V, 3Ph 3HP, 230/460V, 3Ph 4HP, 230/460V, 3Ph 5-1/2HP, 230/460V, 3Ph 7-1/2HP, 230/460V, 3Ph
Motor
Prewired 230V Prewired 230V Prewired 230V Prewired 230V Prewired 230V
Floor Space Required (in./ L x W x H) 50 x 27 x 98 50 x 27 x 98 53 x 30 x 108 53 x 33 x 109 55 x 33 x 115
Net Weight (lbs.) 1632 1632 2405 2800 2536
* Equipped with Automatic Tapping Control
102 wiltontool.com
DRILLING 3' ARM RADIAL DRILL PRESS
WILTON DRILLING
STOCK NUMBER 720R 3' ARM RADIAL DRILL PRESSES
Steel Drilling Capacity (in.) 1-1/2
• The power train gears and spline shafts are made of the finest quality,
Cast Iron Drilling Capacity (in.) 2 heat treated and ground nickel chrome steel–giving extra strength and
Steel Tapping Capacity (in.) 3/4 smoothness to high torque loads
Cast Iron Tapping Capacity (in.) 1 • The spindle is made of the finest case hardened steel, for extra
strength and wear
Steel Boring Capacity (in.) 2-3/4
• The spindle is supported by double row taper roller and thrust ball
Cast Iron Boring Capacity (in.) 4
bearings at the nose, with thrust and radial axis bearings at the top
Column Diameter (in.) 8-1/4
• Built to withstand exceptionally heavy drilling and boring loads and
Distance from Column to Spindle (max./in.) 29-1/2 to insure maximum accuracy
Distance from column to spindle center, Min. (in.) 8-5/8 • Arm raising safety device prevents arm from dropping
Travel of head (Horizontal) (in.) 20-7/8 • Counter balanced mechanism for spindle return
Distance from base to spindle end, Max. (in.) 41-3/4 • 6 speeds/3 feed rates make exotic materials easier to drill, bore and tap
Distance from base to spindle end, Min. (in.) 9-5/8 • Centralized control center
Travel of arm (Vertical) (in.) 23-13/16 • Automatic tool ejector
Table Size (in.) 23-5/8 x 17-1/2 x 15 • Independent arm electric clamping system, which locks and unlocks
T-slot Number & Size (in) 3 & 3/4 the head and column
Base Dimensions (in.) 49-5/8 x 25-3/16 x 6-9/32 • Push button controls are all reduced to 110V
Spindle Taper 4 MT • Electrical circuits are located in the built-in control box at the rear of
Spindle Stroke (in.) 8-1/4 the arm--this keeps the controls dust-and-humidity-free while making
them easily accessible for maintenance
Range of Spindle Speeds (RPM) 6 (88–1500)
• Entire frame is made of Meehanite and high tensile strength cast iron
Feed Rates (IPR) .002, .004, .006
to handle the heaviest of jobs
3HP, 230/460V, 3Ph,
Motor
Prewired 230V STANDARD EQUIPMENT
Elevating Motor 1HP • Built-in work light
Coolant Pump Motor 1/8HP • Coolant pump
Machine Height from Floor (max./in.) 85-7/16 • Tool kit
Floor Space Required (in./L x W x H) 64 x 32 x 85
• Box table
Shipping Weight (lbs.) 2970
wiltontool.com 103
4' ARM RADIAL DRILL PRESSES DRILLING
4' ARM RADIAL DRILL PRESSES
• Power train gears and spline shafts are made of the finest quality,
heat treated and ground nickel chrome steel–giving extra strength and
smoothness to high torque loads
• The spindle is made of the finest case hardened steel, for extra strength
and wear
• The spindle is supported by double row taper roller and thrust ball
bearings at the nose, with thrust and radial axis bearings at the top
• The spindle is built to withstand exceptionally heavy drilling and boring
loads and to insure maximum accuracy
• Push button controls are all reduced to 110V
• Electrical circuits are located in the built-in control box at the rear of the
arm–this keeps the controls dust and humidity free while making them
easily accessible for maintenance
• Entire frame is made of Meehanite and high tensile strength cast iron to
handle the heaviest of jobs
• Arm raising safety device prevents arm from dropping
• Counter balanced mechanism for spindle return
• 12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
• Centralized control center
WILTON DRILLING
• Automatic tool ejector
• Independent manual arm clamping system, which locks and unlocks the
head and column
STANDARD EQUIPMENT
1230R
• Built-in work light
• Coolant pump
• Tool kit
• Box table
STOCK NUMBER 1100R 1100R-4 1230R 1230R-4
Steel Drilling Capacity (in.) 1-3/4 1-3/4 1-7/8 1-7/8
Cast Iron Drilling Capacity (in.) 2-1/4 2-1/4 2-5/16 2-5/16
Steel Tapping Capacity (in.) 1 1 1 1
Cast Iron Tapping Capacity (in.) 1-1/4 1-1/4 1-1/2 1-1/2
Steel Boring Capacity (in.) 3-3/8 3-3/8 3-3/8 3-3/8
Cast Iron Boring Capacity (in.) 4-3/4 4-3/4 4-3/4 4-3/4
Column Diameter (in.) 10-1/4 10-1/4 11-13/16 11-13/16
Distance from Column to Spindle (max./in.) 43-5/16 43-5/16 46 46
Distance from Column to Spindle (min./in.) 9-5/8 9-5/8 13-3/4 13-3/4
Travel of head (Horizontal) (in.) 33-5/8 33-3/8 35 35
Distance Base to Spindle (max./in.) 50-3/8 50-3/8 54 54
Distance Base to Spindle (min./in.) 12-5/8 12-5/8 19-3/8 19-3/8
Travel of arm (Vertical/in.) 24 24 34-5/8 34-5/8
Table Dimensions (in.) 24-3/4 x 20-1/2 x 16-1/2 24-3/4 x 20-1/2 x 16-1/2 27-7/8 x 20-1/2 x 16-1/2 27-7/8 x 20-1/2 x 16-1/2
T-slot Number & Size (in.) 3 & 3/4 3 & 3/4 3 & 3/4 3 & 3/4
Base Dimensions (in.) 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2
Spindle Taper 4 MT 4MT 4 MT 4 MT
Quill Travel (in.) 9 9 9-7/8 9-7/8
Spindle Travel w/Power Feed Engaged (in.) 4 4 4 4
Spindle Speeds (RPM) 12 (44–1500) 12 (44–1500) 12 (45–1550) 12 (45–1550)
Feed Rates (IPR) 3 (.002, .004, .006) 3 (.002, .004, .006) 3 (.002, .004, .006) 3 (.002, .004, .006)
Motor (2-Speed) (Low & High) 1-1/2 to 3HP, 230V, 3Ph 1-1/2 to 3HP, 460V, 3Ph 2-1/2 to 5HP, 230V, 3Ph 2-1/2 to 5HP, 460V, 3Ph
Elevating Motor 1HP 1HP 1HP 1HP
Coolant Pump Motor 1/8HP 1/8HP 1/8HP 1/8HP
Machine Height from Floor (in.) 100 100 109-1/2 109-1/2
Floor Space Required(in./L x W x H) 74 x 34 x 89 74 x 34 x 39 80 x 39 x 89 80 x 39 x 89
Shipping Weight (lbs.) 4290 4290 4620 4620
104
DRILLING 5' ARM RADIAL DRILL PRESS
WILTON DRILLING
STOCK NUMBER 1600R 5' ARM RADIAL DRILL PRESSES
Drilling Capacity (in.) 2-1/2
• The power train gears and spline shafts are made of the finest quality,
Cast Iron Drilling Capacity (in.) 2-7/8 heat treated and ground nickel chrome steel–giving extra strength and
Steel Tapping Capacity (in.) 2 smoothness to high torque loads
Cast Iron Tapping Capacity (in.) 2-3/8 • The spindle is made of the finest case hardened steel, for extra strength
and wear
Steel Boring Capacity (in.) 5
• The spindle is supported by double row taper roller and thrust ball
Cast Iron Boring Capacity (in.) 7-3/8
bearings at the nose, with thrust and radial axis bearings at the top
Column Diameter (in.) 17
• The spindle is built to withstand exceptionally heavy drilling and boring
Distance from Column to Spindle (max./in.) 63 loads and to insure maximum accuracy
Distance from Column to Spindle (min./in.) 17 • Push button controls are all reduced to 110V
Travel of head (Horizontal) (in.) 49-5/8 • Electrical circuits are located in the built-in control box at the rear of the
Distance Base to Spindle (max./in.) 63 arm–this keeps the controls dust-and-humidity-free while making them
Distance Base to Spindle (min./in.) 13 easily accessible for maintenance
Travel of arm (Vertical/in.) 50 • Entire frame is made of Meehanite and high tensile strength cast iron to
handle the heaviest of jobs
Table Dimensions (in.) 27-7/8 x 19-5/8 x 15-3/4
• Arm raising safety device prevents arm from dropping
T-slot Number & Size (in.) 3 & 7/8
• Counter balanced mechanism for spindle return
Base Dimensions (in.) 97-5/8 x 41-11/32 x 8-1/4
• 12 speeds/6 feed rates make exotic materials easier to drill, bore
Spindle Taper 5 MT
and tap
Quill Travel (in.) 14-9/16
• Centralized control center
Spindle Travel w/Power Feed Engaged (in.) 13
• Automatic tool ejector
Range of Spindle Speeds (RPM) 12 (40–1920)
• Hydraulic head and column clamping
Feed Rates (IPR) 6 (.003–.038 IPR)
7-1/2HP, 230/460V, 3Ph, STANDARD EQUIPMENT
Motor
Prewired 230V • Built-in work light
Elevating Motor 2HP • Coolant pump
Clamping Motor 1HP • Tool kit
Coolant Pump Motor 1/2HP • Box table
Machine Height from Floor (in.) 124-58/64
Floor Space Required(in./L x W x H) 116 x 55 x 112
Shipping Weight (lbs.) 11,220
wiltontool.com 105
DRILL PRESS VISES DRILLING
CAM ACTION DRILL PRESS VISES
• Simple push or pull on the center bar knob sets the jaw in position
• Easy press locking lever cams the jaw ahead 3/32", exerting a holding
pressure that is adjustable from 400 to 1100 lbs.
• Base is designed for clear through drilling applications
• Unique top locking lever can be raised or lowered to tighten or loosen
against the workpiece
STOCK MODEL JAW OPENING JAW DEPTH SHIP WEIGHT
JAW WIDTH (IN.)
NUMBER NUMBER (IN.) (IN.) (LBS.)
13400 1203 3 3 1-1/4 10
13401 1204 4 4-11/16 1-5/16 18
13402 1206 6 6-3/16 1-13/16 34
13403 1208 8 8-3/16 2 51
SUPER PRECISION DRILL PRESS VISES
• Rugged design makes these vises perfect for even the most difficult of
drilling, tapping and reaming operations
• Body made from close grain aged cast iron
• Ground vise bed for smooth and consistent jaw movement
• Jaws are hardened and grounded, with cross patterned 90° V-grooves
WILTON DRILLING
in the stationary jaw facilitating holding of round pieces both horizontally
and vertically
• Hardness of jaws-55+3HRC
STOCK MODEL JAW WIDTH JAW OPENING SHIP WEIGHT
JAW DEPTH (IN.)
NUMBER NUMBER (IN.) (IN.) (LBS.)
11718 DPV/80 3-3/16 3-1/2 1 13
11719 DPV/100 4 4 1-1/4 20
VERSATILE DRILL PRESS VISES
• Made from high grade cast iron
• Ground vise bed for smooth, consistent jaw movement
• Hardened top V-groove jaws
• Rugged design and large workload capacity
STOCK JAW WIDTH JAW OPENING SHIP WEIGHT
MODEL NUMBER JAW DEPTH (IN.)
NUMBER (IN.) (IN.) (LBS.)
Continuous Nut
63238 1335 3 2-3/4 1-7/8 6
63239 1345 4 4 2-1/8 12
63240 1360 5 5 2-1/8 24
Rapid Acting Nut
63241 1435 3-1/2 4-1/4 1-3/4 11
63242 1445 4-1/2 4-3/4 1-7/8 15
63243 1460 6 6-3/4 2-1/8 28
STANDARD & ANGLE DRILL PRESS VISES
• Precision grinding of sides and front side face permits additional mounting
positions for drilling, tapping or reaming
• Combining a smooth moveable jaw plate with a cross-patterned 90°
V-groove stationary jaw
• The vise is recommended for general use
STOCK JAW WIDTH JAW DEPTH SHIP WEIGHT
MODEL NUMBER JAW OPENING (IN.)
NUMBER (IN.) (IN.) (LBS.)
Standard Models
12800 25 2-1/2 2-9/16 1-1/2 6
12860 30 3 3-1/8 1-3/4 10
Angle Models
12850 25A 2-1/2 2-1/2 1-1/2 12
12870 30A 3-1/8 3-1/8 1-3/4 17
106 wiltontool.com
DRILLING DRILLING ACCESSORIES
KEYLESS DRILL CHUCKS WITH INTEGRAL SHANK
• Integral shank design eliminates the possiblilty of the chuck slipping on its arbor
• It is ideal for all your drill press and machining center operations
• All parts are precision ground, heat treated and balanced with each one being
precision tested to .0019" T.I.R.
STOCK NUMBER CAPACITY (IN.) MALE TAPER WEIGHT (LBS.)
KDC80-MT2 0–5/16 MT-2 1-1/2
KDC130-MT3 0–1/2 MT-3 2-1/2
KDC130-MT4 0–1/2 MT-4 2-3/4
KDC160-MT3 1/8–5/8 MT-3 3-1/2
KDC160-MT4 1/8–5/8 MT-4 4
PRECISION KEYLESS DRILL CHUCKS-TAPPER MOUNTED
WILTON DRILLING
• These chucks incorporate a unique self-tightening feature, whick allows them to
grip the cutting tool tighter as more torque is applied
• Even when high torque is applied, the chucks can be easily opened by hand
• Extremely high accurachy and precision design make these chucks suitable for
use on machining centers, CNC machines and conventional equuipment
• All parts are precision ground, heat treated and balanced with each chuck being
precision tested to .0019" T.I.R.
STOCK NUMBER CAPACITY (IN.) TAPER MOUNT WEIGHT (LBS.)
KDC100-JT2 0–3/8 JT2 1-1/2
KDC100-JT33 0–3/8 JT33 1-1/2
KDC130-JT33 0–1/2 JT33 2
KDC130-JT6 0–1/2 JT6 2
KDC160-JT6 1/8–5/8 JT6 2-1/2
KDC160-JT3 1/8–5/8 JT3 2-1/2
ARBORS
• Precision CNC machined and ground arbors provide high accuracy and close
tolerance fits
• For best accuracy and fit we recommend mounting Wilton keyless drill
chucks on Wilton arbors
STOCK NUMBER CHUCK TAPER SHANK TAPER WEIGHT (OZ.)
DCA2-JT2 JT2 MT-2 5
DCA2-JT33 JT33 MT-2 5
DCA2-JT6 JT6 MT-2 5
DCA2-JT3 JT3 MT-2 7
DCA3-JT33 JT33 MT-3 11
DCA3-JT6 JT6 MT-3 11
DCA3-JT3 JT3 MT-3 12
DCA4-JT6 JT6 MT-4 21
DCA4-JT3 JT3 MT-4 23
107
DRILLING ACCESSORIES DRILLING
REVERSIBLE TAPPING HEADS
• Pre-selective torque drive prevents tap breakage
• 1.75: 1 reverse ratio increases productivity
• Self-feed ensures gauge perfect threads
• Re-entry cushion eliminates cross threading
• Right hand tapping only
STANDARD EQUIPMENT
• Tap holder
• Two morse taper arbors
• Two keys
• Brake rod
• Hex wrench
• Packaged in wooden box with latch
STOCK NUMBER TAPPING CAPACITY HEAD WEIGHT PACKAGE WEIGHT
WTH25 5/64–1/4 2-1/2 5
WTH50 3/16–7/16 5-1/4 9-3/4
WTH75 5/16–3/4 10 16-1/4
WILTON DRILLING
MILLING TABLES
• Highest quality meehanite castings
• Table and ways precision ground
• Adjustable keys and locks for added rigidity
• Leadscrews supported by axial ball bearings
• Table accuracy on horizontal plane within 0.001"
• Leadscrew accuracy 0.0005"
• 3 T-Slots
STOCK NUMBER 5104561 5107901
Working Surface (in.) 22-9/16 x 9-7/16 17-23/32 x 9-7/16
Longitudinal Feed (in.) 14-49/64 14-49/64
Crossfeed (in.) 6-1/8 6-1/8
Length of Bedplate (in.) 10-13/64 10-13/64
Width of Bedplate (in.) 9 -7/32 9-7/32
Total Height (in.) 4-1/2 4-1/2
Net Weight (lbs.) 123 165
ADAPTER PLATE WITH STUD
For use with all WILTON/ARBOGA Gear Head Drill Presses. Fits directly
onto the standard table knee. Will not fit ARBOGA Model A4008.
STOCK NUMBER DESCRIPTION
5107980 Adapter plate with stud
ADAPTER PLATE WITH STUD
Can be used on all WILTONdrill presses with 18" x 25" tables. These
adapter plates bolt directly onto Wilton's standard T-slot production table.
STOCK NUMBER DESCRIPTION
5046110 Box Plate Adapter
108 wiltontool.com
