Docstoc

WM5347N Product Specification No_Logo v1.0.1

Document Sample
WM5347N Product Specification No_Logo v1.0.1 Powered By Docstoc
					                            Product Management
           Specification – WM5347N WiMAX IAD




Product Specification
  WM5347N WiMAX IAD
                                                                          Product Management
                                                         Specification – WM5347N WiMAX IAD


Revision Information
Here is the revision history which records the changes information of this document. The
revision information consists of revision number, change description, change date and the
author of this edition.


  Revision #                             Description                       Date         Author

  V1.0.0       First formal release.                                 June 10, 2010   Paul Chi
               1.   Correct bandwidth of 3.5GHz model.
  V1.0.1       2.   Correct Wi-Fi data rate.                         June 30, 2010   Paul Chi
               3.   Correct physical dimension
                                                                                            Product Management
                                                                           Specification – WM5347N WiMAX IAD

                                                TABLE of CONTENTS

1.     PRODUCT OVERVIEW .................................................................................................1
     1.1.    FEATURES .......................................................................................................................... 1
     1.2.    MODEL NAMES.................................................................................................................... 1

2.     SPECIFICATIONS .........................................................................................................2
     2.1.    HARDWARE SPECIFICATION ................................................................................................. 2
     2.2.    SOFTWARE SPECIFICATION .................................................................................................. 4
     2.3.    WIFI FUNCTIONS ................................................................................................................. 5
     2.4.    VOIP .................................................................................................................................. 6
     2.5.    POWER REQUIREMENT ........................................................................................................ 7
     2.6.    PHYSICAL ........................................................................................................................... 7
     2.7.    ENVIRONMENT .................................................................................................................... 7
     2.8.    PACKAGING REQUIREMENT .................................................................................................. 7




                                                                                                                                               Page: i
                                                              Product Management
                                             Specification – WM5347N WiMAX IAD

1. PRODUCT OVERVIEW

WM5347N IAD with 802.11n Wi-Fi packed powerful functions - WiMAX, WiFi, VOIP, Fax all
in one box. WM5347N was designed to provide broad band access and VOIP all-in-on box.
WM5347N complies with 802.16e-2005 wave 2 standard, and support both MIMO A
(Space-time-coding) and B (Space-time-multiplexing). WM5347N comes with a browser-
based utility for easy setup and configuration for quick and easy installation to enable
WiMAX services on-the-fly.

WM5347N is designed with internal high gain MIMO antenna for WiMAX and internal
antenna for Wi-Fi. WM5347N supports TR-069 and OAM-DM for remote management and
built-in firewall.



1.1. Features
   IEEE 802.11n Wi-Fi

   Easy to use browser-based utility

   Support VoIP (SIP) call

   FXS port supports regular phone or Fax

   High performance MIMO antenna

   Built-in firewall

   Support TR069 / OAM-DM

   Support 3 variations in terms of frequency band

      2.3GHz Band: 2.305GHz ~ 2.395GHz

      2.5GHz Band: 2.496GHz ~ 2.690GHz

      3.5GHz Band: 3.3 ~ 3.6GHz



1.2. Model Names
The model names of 3 variances are listed below.

   WM5347N-2G3

   WM5347N-2G5

   WM5347N-3G5



                                                                                    Page: 1
                                                           Product Management
                                          Specification – WM5347N WiMAX IAD
2. SPECIFICATIONS

2.1. Hardware Specification
  Standard Compliance

     IEEE 802.16e-2005 Wave 2

  Frequency Band:

     2.3G: 2305~2395MHz (WM5347N-2G3)

     2.5G: 2496~2690MHz (WM5347N-2G5)

     3.5G: 3300~3600MHz (WM5347N-3G5)

  Antenna Gain:

     WiMAX: 6 dBi (internal)

     Wi-Fi: 0 dBi (Internal)

  Modulation: Adaptive QPSK / 16QAM / 64QAM (DL & UL)

  Maximum Output power:

     QPSK-CTC-3/4 TX power max. 27dBm, min 26dBm

     16QAM -CTC-3/4 TX power max. 27dBm, min 26dBm

     64QAM -CTC-3/4 TX power max. 27dBm, min 26dBm

  Channel Bandwidth / FFT Size

     3.5MHz / 512 FFT

     5MHz / 512 FFT

     7MHz / 1024 FFT

     8.75MHz / 1024 FFT

     10MHz / 1024 FFT

  User Data Throughput (Matrix B):

     UL: Maximum 8Mbps at 64QAM CTC 5/6

     DL: Maximum 26Mbps at 64QAM CTC 5/6

  RX Sensitivity(10MHz, MRC):

     QPSK 1/2, -98dBm, QPSK 3/4, -95dBm


                                                                         Page: 2
                                                            Product Management
                                           Specification – WM5347N WiMAX IAD
   16QAM 1/2, -92dBm, 16QAM 3/4, -89dBm

   64QAM 1/2, -87dBm, 64QAM 3/4, -82dBm

   64QAM 5/6, -79dBm

Fast channel feedback

AMC 2x3 and beam forming sounding

Convoutional coding (CC) and convolutional turbo code (CTC)

PUSC and FUSC sub-carrier allocation modes (DL)

HARQ categoriy-1/2/3/4, stop and wait, chase combining, and ,multi-channel support

Closed and open loop power control

ECINR and PCINR measurement

WiMAX MAC

   128 bits AES-CCM data encryption/decryption

   CMAC Message Digest

   EAP-TLS/TTLS, SIM/AKA/ROHC authentication; others are upon customer request

   PKMv2 Key management

   ARQ

   Packaging/fragmentation

   Five QoS classes – UGS, ERT-VR, RT-VR, NRT-VR, BE

   Convergence sub-layer payload header

   IPv4/v6 Ethernet and VLAN convergence sub-layer

   Sleep and idle modes

   Handover and optimized handover

I/O:

   2 x 10/100-BaseT RJ-45 Ethernet ports

   2 x RJ-11 ports for FXS

   1 x Power Jack

   1 x Power on / off Switch

   1 x Reset Button

                                                                                 Page: 3
                                                               Product Management
                                              Specification – WM5347N WiMAX IAD
     Wi-Fi: IEEE 802.11 b/g/n

  MIMO ( 1TX/2 RX ):

     STC Matrix A+ MRC in DL for two antennas

     STC Matrix B ( MIMO 2 x2 on DL )

  QoS Service Class:

     BE, UGS, rt-VR, nrt-VR, ert-VR

  Power Control:

     idle/sleep mode, paging



2.2. Software Specification
  PPP Support

     PPPoE (RFC 2516)

  Network

     Support Router, IP-Sharer/NAT and LAN Bridge Modes

     Stateful packet inspection

     Static Routing table

     RIP1 (RFC 1058) / RIP2 (RFC 1389)

     NAT with Application Layer Gateways (ALG) support

     DNS relay (proxy)

     Network Address Translation (NAT)/ PAT support

     UPnP

     DHCP client, server (RFC 2131) and relay function

  Quality of Service

     Support QoS function in the network system

     IP: IP ToS function (RFC 1349), supports priority queues for upstream and
     downstream traffic based on ToS field

     Diffserv Codepoint (DSCP) (RFC 2475)

     Voice traffic priority at ensured configured bandwidth


                                                                                 Page: 4
                                                                Product Management
                                               Specification – WM5347N WiMAX IAD
  Management

     LAN/WAN management via Telnet interface or Web-based browser interface

     Firmware upgrade through TFTP, FTP, or HTTP/HTTPS

     Status display and event report from Web-based management

  Auto-Provisioning Support

     Remote Firmware and configuration file upgrade via Web, TR069 and OMA-DM

     Status and performance monitoring and alerting (SNMP v2, Traffic Statistic, Event
     Log)

     TR-069 or OMA-DM



2.3. WiFi Functions
  Support IEEE 802.11b/g/n

  Support IEEE802.1x, WPA, WPA2 authentication (personal & enterprise)

  64/128bit WEP Encryption

  MAC-address-based access/filtering control

  Wireless Distribution System (WDS) support

  Supports both transmit and receive antenna diversity

  Data rates

     11b: 1, 2, 5.5, 11Mbps

     11g: 1, 2, 6, 9, 12, 18, 24, 36, 48, 54

     11n: 15, 30, 45, 60, 90, 120, 135, 150

  DSSS with DBPSK and DQPSK, CCK modulations and demodulations with long and
  short preamble.

  OFDM with BPSK, QPSK, 16QAM and 64QAM modulations and demodulations
  supported with rate compatible punctured convolution coding with coding rate of 1/2, 2/3
  and 3/4.

  Multiple-SSID support

  Hidden SSID




                                                                                      Page: 5
                                                                Product Management
                                               Specification – WM5347N WiMAX IAD
2.4. VoIP
  VoIP Protocol

     SIP (RFC3261) for VoIP, SRTP for SIP (RFC3411)

     TLS for SIP (RFC2246)

     SDP (RFC2327)

  SIP basic messages: REGISTER, INVITE, ACK, BYE, CANCEL, SUBSCRIBE, NOTIFY,
  OPTIONS, INFO (RFC2976), UPDATE(RFC3311), OFFER/ANSWER (RFC3264),
  REFER (RFC3515),"Replaces" Header (RFC3891)

  SIP authentication (HTTP Digest with MD5)

  VoIP Voice Features

     Jitter Buffer, Voice Activity Detection, Comfort Noise Generation, Caller ID
     detection/generation,

     Call process tone

     Codecs: G.711, G.726, G.729A (Optional), G.723.1(Optional), G.168 Echo
     Cancellation

     T.38 Fax

     G3 Fax / Modem tone detection and fall-back to G.711 (Pass Through)

  Phone User Service

     Basic call thru SIP account number

     Caller ID detection/generation for type I and II

     CLIP / CLIR

  Supplementary call features:

     Call Hold

     Call Transfer

     Call Forward

     Call Waiting

     Call Conferencing (SIP only)

     DND

     Anonymous call blocking

     Call return
                                                                                    Page: 6
                                                              Product Management
                                             Specification – WM5347N WiMAX IAD
  Flexible Dial Plan support

  Support 1 or 2 accounts for the device

  RFC2833



2.5. Power Requirement
  Input: 120 / 240 VAC, 60 / 50 Hz

  Output: 12 VDC, 1.5 Amp



2.6. Physical
  Dimension (H*W*D):

     218mm x 135mm x 35mm (w/o Stand)

     232mm x 135mm x 65mm (include Stand)

  Weight: 477g



2.7. Environment
                                 C       C
  Operating temperature range: 0 ° to 45 °

                                 C       C
  Storage temperature range: -40 ° to 65 °

  Humidity: 10~90%, non-condensing



2.8. Packaging Requirement
  WM5347N IAD in plain gift box

  One Ethernet Cable, 8P4C, 1.83m, yellow

  One telephone line, 6P2C, 1.83m, gray

  One Power Adaptor

  QIG, A4 size, single page

  CD with User Manual




                                                                            Page: 7
                                  Product Management
                 Specification – WM5347N WiMAX IAD




Non-disclosure




                                                Page: 8

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:124
posted:6/5/2011
language:Irish
pages:11