Metalworking Products CoroPak by mikeholy

VIEWS: 69 PAGES: 30

									This PDF document is divided into several files


   Please click here to continue
                             Solid holders HSK          TOOLHOLDING SYSTEMS
HSK solid holders


                                                                             CoroGrip®
                              Basic holders
                                                                             Page D 97



                                                                             HydroGrip®
                                                                             Page D 104

                              Solid holders
                                                                             Adjustable Coromant U drill
                                                                             holder
                                                                             Page D 114




                                                                              Holders and adaptors for
                                                                              CoroMill® modular cutting tools
                                                                              Page D 108




Basic holders
Coromant Capto                                   D 22     Accessories                                 D 117

Varilock                                         D 58     Taper details                               D 118

                                                          Handling instructions                       D 127
Programme Overview                               D 90
                                                          Spare parts                                 D 139
Solid holders
Facemill holder                                  D 91
Damped facemill holder                           D 91
Collet chuck holder                              D 92                                                                D
Weldon shank holder                              D 92
Whistle Notch shank holder                       D 93
Coromant Delta and                               D 94
Coromant U drill holder
Morse taper holder                               D 94
Tapping chuck                                    D 95
Blanks                                           D 96
Coolant tube                                     D 96




                                                                                                              D 89
                                 HSK solid holders                     TOOLHOLDING SYSTEMS
 Facemill holder
 392.41005




                                     Note: Hole for data carrier is not standard.
                                                                                                                                 l1 = programming length

HSK              Ordering code                Dimensions, mm
size

                   Balanced by design                                                                       KG
                                              D5m     dmt        D5t   lc     l1     l3         l22
63-A/C           392.41005- 63 22 050 B        63     22         50    16     50     24         –          1,1
                            63 27 060 B        63     27         50    18     60     34         –          1,35
                            63 32 060 B        63     32         63    20     60     –          16         1,5
                            63 40 060 B        63     40         80    23     60     –          16         2,0
100-A/C          392.41005- 100 22 050 A      100     22         50    16     50     21         –          2,4
                            100 27 050 A      100     27         50    18     50     21         –          2,45
                            100 32 050 A      100     32         63    20     50     21         –          2,8
                            100 40 060 A      100     40         80    23     60     31         –          3,6
Coolant tube must be ordered separately, see page D 96.                                               Ordering example: 2 pieces 392.41005-63 22 050 B




 Damped milling adaptor
 392.41006




                                                                                     D1




                                                                                                                                                           D
Coupling         Ordering code                 Dimensions, mm
size

                                                                                                                        KG
                                               dmt         D5t         D1      D5m        l1          l3          lc           Max rpm

HSK 63-A/C       392.41006-63 22 220A          22          40          50      63         220         194         16    3,7   6 000
                 392.41006-63 27 260A          27          55          63      63         260         –           18    6,2   4 000
HSK 100-A/C 392.41006-100 22 260A              22          40          50      100        260         221         16    5,5   6 000
            392.41006-100 27 320A              27          55          85      100        320         275         18   12,3   4 000
HSK 100-A/C 392.41006-100 32 330A              32          70          85      100        330         285         20   14,9   3 000

                                                                                                      Ordering example: 2 pieces 392.41006-63 22 220A




         D 117         D 163


                                                                                                                                                    D 91
                   TOOLHOLDING SYSTEMS                                                                     HSK solid holders

     Collet chuck
     DIN 6499
     392.41014
                                                                                                                                Accessories
                                                                                                                                                          393.14
                                                                                                                                 Not delivered with the
                                                                                                                                 tool, must be ordered
                                                                                                                                 separately.


                                              Note: Hole for data carrier is not standard.                                       See page                 D 124

    HSK            Ordering code                        Dimensions, mm                                                                 Collets
    size                                                                                                                               393.14

                     Balanced by design                                                                                                                   Chuck
                                                                                                                  KG
                                                        D5m       dmt         D21          l3        l21                               Size               spanner
     63-A/C        392.41014- 63 32 100 B                 63      2–20        50            74       100      1,25                      32                5680 096-03
                              63 40 120 B                 63      3–26        63            94       120      1,85                      40                5680 096-04
    100-A/C        392.41014- 100 32 100 A              100       2–20        50            71       100      2,6                       32                5680 096-03
                              100 40 120 A              100       3–26        63            91       120      3,2                       40                5680 096-04
                              100 50 130 A              100       6–34        78           101       130      4,5                       50                5680 096-05

    Coolant tube must be ordered separately see page D 96.                                                        Ordering example: 2 pieces 392.41014-63 32 100 B




           D 163

     Endmill holder, Weldon type
     Shank according to DIN 6535-HB
     392.41020




                           Note: Hole for data carrier is not standard.                                                                          l1 = programming length

    HSK            Ordering code                        Dimensions, mm
    size

                     Balanced by design
                                                                                                                        KG
                                                        D5m     dmt      D1         l1          l3   l21    l22

     63-A/C        392.41020- 63   06   065   B           63     6       25         47          39    65    –          0,9
D                             63   08   065   B           63     8       28         47          39    65    –          0,9
                              63   10   065   B           63    10       35         45          39    65    –          1,0
                              63   12   080   B           63    12       42         57,5        54    80    –          1,2
                              63   14   080   B           63    14       44         57,5        54    80    –          1,3
                              63   16   080   B           63    16       48         56          54    80    –          1,4
                              63   18   080   B           63    18       50         56          54    80    –          1,5
                              63   20   080   B           63    20       52         55          54    80    –          1,5
                              63   25   110   B           63    25       65         86          –    110    16         2,6
                              63   32   110   B           63    32       72         86          –    110    16         2,8
    100-A/C        392.41020- 100   10   080   A        100     10       35         60          51    80    –          2,5
                              100   12   080   A        100     12       42         57,5        51    80    –          2,8
                              100   14   080   A        100     14       44         57,5        51    80    –          2,7
                              100   16   100   A        100     16       48         76          71   100    –          3,0
                              100   18   100   A        100     18       50         76          71   100    –          3,1
                              100   20   100   A        100     20       52         75          71   100    –          3,2
                              100   25   100   A        100     25       65         76          71   100    –          3,7
                              100   32   100   A        100     32       72         76          71   100    –          4,0
                              100   40   120   A        100     40       90         90          –    120    16         5,8
    Coolant tube must be ordered separately, see page D 96.                                                       Ordering example: 2 pieces 392.41020-63 06 065 B




           D 164

    D 92
                               HSK solid holders                    TOOLHOLDING SYSTEMS
 Whistle Notch holder
 Shank according to DIN 6535-HE
 Short design for carbide drills
 Adjustable presetting length
 392.41021




                                   Note: Hole for data carrier is not standard.
                                                                                                                        l1 = programming length

HSK            Ordering code                 Dimensions, mm
size

                 Balanced by design
                                                                                                    KG
                                             D5m     dmt     D1      l1           l3   l21   l22

 63-A/C        392.41021-63 06 080 B          63      6      25      42–52        54    80   –     1,0
                         63 08 080 B          63      8      28      42–52        54    80   –     1,0
                         63 10 080 B          63     10      35      38-48        54    80   –     1,1
                         63 12 090 B          63     12      42      43-53        64    90   –     1,3
                         63 14 090 B          63     14      44      43-53        64    90   –     1,4
                         63 16 100 B          63     16      48      50-60        74   100   –     1,6
                         63 18 100 B          63     18      50      50-60        74   100   –     1,7
                         63 20 100 B          63     20      52      48-58        74   100   –     1,8
                         63 25 110 B          63     25      65      52-62        –    110   24    2,6
                         63 32 110 B          63     32      72      49-59        –    110   19    2,8
100-A/C        392.41021-100 10 090 A        100     10      35      48-58        61    90   –     2,5
                         100 12 100 A        100     12      42      53-63        71   100   –     2,7
                         100 14 100 A        100     14      44      53-63        71   100   –     2,8
                         100 16 100 A        100     16      48      50-60        71   100   –     2,9
                         100 18 100 A        100     18      50      50-60        71   100   –     3,0
                         100 20 110 A        100     20      52      58-68        81   110   –     3,3
                         100 25 120 A        100     25      65      62-72        91   120   –     4,2
                         100 32 120 A        100     32      72      59-69        91   120   –     4,5
Coolant tube must be ordered separately, see page D 96.                                      Ordering example: 2 pieces 392.41021-63 06 080 B




                                                                                                                                                  D




       D 164


                                                                                                                                           D 93
                   TOOLHOLDING SYSTEMS                                                                        HSK solid holders

     Holder for Coromant U and Delta drills
     Shank according to ISO 9766
     392.41027




                                             1) Programming length for Coromant U drills.
                                             2) Programming length for Coromant Delta drills.

                                             Note: Hole for data carrier is not standard.
                                                                                                                                                 l1 = programming length

    HSK            Ordering code                       Dimensions, mm
    size

                       Balanced by design
                                                       D5m     dmt     D1        l11)        l12)        l3     l22       KG




     63-A/C        392.41027-63   16   080   B          63     16      36         80         30,5        54     –        1,1
                             63   20   080   B          63     20      40         80         28,5        54     –        1,1
                             63   25   090   B          63     25      45         90         32,5        64     –        1,2
                             63   32   090   B          63     32      52         90         28,5        64     –        1,3
    100-A/C        392.41027-100   16   090   A        100     16      36         90         40,5        61     –        2,6
                             100   20   090   A        100     20      40         90         38,5        61     –        2,6
                             100   25   100   A        100     25      45        100         42,5        71     –        2,7
                             100   32   100   A        100     32      52        100         38,5        71     –        2,9
                             100   40   110   A        100     40      65        110         38,5        81     –        3,5
    Coolant tube must be ordered separately, see page D 96.                                                           Ordering example: 2 pieces 392.41027-63 16 080 B




           D 164




     Morse taper holder
     392.41041




D


                                             Note: Hole for data carrier is not standard.
                                             Sleeves must be ordered separately, see page D 96.
                                                                                                                                                 l1 = programming length

    HSK            Morse       Ordering code                         Dimensions, mm
    size           taper

                                   Balanced by design
                                                                                                               KG
                                                                     D5m    D1          l1          l3
     63-A/C        2           392.41041-63 02 120B                  63     32          120          94       1,2                      For tools with tenon
     63-A/C        3                     63 03 140B                  63     40          140         114       1,6
     63-A/C        4                     63 04 160B                  63     52          160         134       2,3
    100-A/C        3           392.41041-100 03 150A                 100    40          150         121       3,0
    100-A/C        4                     100 04 170A                 100    52          170         141       3,7
    100-A/C        5                     100 05 200A                 100    68          200         171       5,2
                                                                                                                      Ordering example: 2 pieces 392.41041-50 01 100A




    D 94
                                    HSK solid holders                         TOOLHOLDING SYSTEMS
  Tapping chucks




                                                             X
  Collet type
  392.41060A
  392.41060B




                                                           Floating design,                                            For synchronized machines
                                                           External coolant supply                                     With internal coolant supply
                                                                                                                       Max. coolant pressure 10 bar.
                                  Note: Hole for data carrier is not standard.

 Tap              HSK            Ordering code                         Tap shank                Dimensions, mm                                         Collet
 range            size                                                 dimensions, mm                                                                  391.60A
                                                                                                                                          Max.
                                                                                                                                          torque,
                                                                       Bk            dmm        D5m   D21     l1       l3    l21     KG   Nm           Size

                                 For synchronized machines
 M7–M16            63-A/C        392.41060A-63 02 080B                 2-10          2,8-13      63   40       39       54    80    1,1    60           3,   4
 M7–M16            63-A/C                   63 02 120B                 2-10          2,8-13      63   40       79       94   120    1,6    60           3,   4
 M14–M32           63-A/C                   63 03 100B                 8-18          10-23       63   56,4     45       74   100    1,8   380           5,   6
 M7-M16            100-A/C       392.41060A-100 02 105A                2-10          2,8-13     100   40       64       79   105    2,2    60           3,   4
 M14–M32           100-A/C                  100 03 105A                8-18          10-23      100   56,4     50       79   105    2,5   380           5,   6
                              Floating design
 M7–M16            63-A/C        392.41060B-63 02 113B                 2-10          2,8-13      63   40    72          87   113    1,1    60           3,   4
 M14–M32           63-A/C                   63 03 165B                 8-18          10-23       63   56,4 110         139   165    2,6   380           5,   6
 M7–M16            100-A/C       392.41060B-100 02 120A                2-10          2,8-13     100   40    79          91   120    2,6    60           3,   4
 M14–M32           100-A/C                  100 03 172A                8-18          10-23      100   56,4 117         143   172    4,2   380           5,   6
Coolant tube must be ordered separately, see page D 96.                                                Ordering example: 2 pieces 392.41060A-63 02 0780B




Collets must be ordered separately                                                                                                                                      D
 Collet1)                    Ordering code                                    Accessories1)
 size

                                                      Shank 2)                                              Spanner for
                  dmm                                 DIN 374                 Key for jaws                  locking nut
 1                 3,5–6,5   391.60A-OZ      J421 M5–M12                         3021 010-040                5680 090-01
 2                 6,5–10    391.60A-OZ      J422
 3                 2,8–7     391.60A-OZ      J443 M4–M16                         3021 010-040                5680 090-02
 4                 7–13      391.60A-OZ      J440
 5                10–16      391.60A-OZ      J461 M14–M32                        3021 010-040                5680 092-01
 6                16–23      391.60A-OZ      J462
1) Accessories,   not delivered with the tool, must be ordered separately.                                         Ordering example: 10 pieces 391.60A-OZ J421
2) For   other standards, check shank dimensions Bk and dmm (∅ and )




          D 117          D 165


                                                                                                                                                                 D 95
                      TOOLHOLDING SYSTEMS                                                    HSK solid holders

     Blanks
     392.41050




                                        Material: 42 CrMo4
                                        Tensile strength: 800N/mm2
                                        HB ≅ 235


    HSK               Ordering code                   Dimensions, mm
    size


                                                                                       KG
                                                      D5m   D1       l7         l21
      63-A/C          392.41050- 63 64 250A            63    64      250        208    6,3
      63-A/C                     63 130 150A           63   130      150        108   12,2
    100-A/C           392.41050- 100 104 250A         100   104      250        205   16,4
    100-A/C                      100 145 200A         100   145      200        155   22,4
    If localized hardening is required, induction type hardening is recommended.                Ordering example: 2 pieces 392.41050-50 54 250A




     Coolant tube
     5692 for solid HSK assortment




    HSK               Ordering code     Dimensions, mm                                                      Accessories   1)
    size

D                                                                                                           Key for coolant
                                        D21      l1         l2            dth                               tube
       63-A/C         5692 022-04       12       11,5       36,5          M18x1                             5680 094-04

      100-A/C         5692 022-06       16       15,5       44,5          M24x1,5                           5680 094-06

    1) Must   be ordered separately.                                                                     Ordering example: 2 pieces 5692 022-03




              D 165


    D 96
                                     CoroGrip®                TOOLHOLDING SYSTEMS
CoroGrip® high precision power chuck - makes
high precision manufacturing easy
The tool holding system CoroGrip is a hydro- mechanical
chuck with a performance superior to any conventional
system on the market - and with all the capabilities
required for High Speed Machining.




Higher clamping force in a wider range
                                                                                             Transmission torque
CoroGrip provides a clamping force twice as high as shrink fit                               comparison
holders, and three                                                                           Shank         Torque,          Holder
times better than hydraulic chucks.                                                          diameter       Nm
Its precision is easily on a level with shrink fit holders.                                  6 mm                 11        CoroGrip
                                                                                                                   5        Shrink fit
CoroGrip is capable of all applications from superfinishing to                                                              Hydraulic chuck
                                                                                                                   6
heavy roughing.
                                                                                             12 mm                92        CoroGrip
                                                                                                                  72        Shrink fit
The CoroGrip chuck is less dependant on the shank toler-                                                          50        Hydraulic chuck
ances. Even shanks with h7 tolerance can be clamped in a
CoroGrip chuck.                                                                              20 mm              458         CoroGrip
                                                                                                                243         Shrink fit
                                                                                                                181         Hydraulic chuck
                                                                                             25 mm              882         CoroGrip
                                                                                                                421         Shrink fit
                                                                                                                365         Hydraulic chuck
                                                                                             32 mm             1532         CoroGrip
                                                                                                                 ---        Shrink fit
                                                                                                                651         Hydraulic chuck




CoroGrip - the chuck for HSM                                CoroGrip torque transmission by spindle speed
                                                            (Tool shank tolerance h6)                                                                D
The high and reliable clamping force gener-
ated, remains stable on a safe level also at
                                                            Torque (Nm)
extremely high spindle speeds.                      10000
This together with the individually balanced
holder makes CoroGrip a most suitable                                          Shank diameter, dmt
chuck for High Speed Machining.                      1000

                                                                                    32
                                                                                             25
                                                      100

                                                                                                          20

                                                       10                                                                   12


                                                                                                                                           Spindle
                                                        1                                                                                  speed
                                                        0         20 000   40 000   60 000   80 000     100 000        120 000   140 000   rpm



                                                                                                                                              D 97
                TOOLHOLDING SYSTEMS                                       CoroGrip®

    A safe grip in all applications – from finishing to heavy
    roughing.
    Extremely high torque transmission capability prevents the tool from slipping. This
    also applies to rough operations, and as the mechanism is self-locking, no hy-
    draulic pressure is retained in the mechanism during machining. The clamping
    forceremains consistent both during the entire operation and over long term use.




    Longer tool life in high quality production.                Universal - clamps all common shanks on the
    The chucks are manufactured with close tolerances,          market.
    resulting in a maximum run out at the cutting edge of       All types of cutting tools with cylindrical, Whistle Notch
    only 0,002 - 0,006 mm - measured at a length of three       or Weldon shanks are safely retained in the CoroGrip
    times the tool diameter.                                    chuck even if the shank is only clamped along half of its
    The run out is consistently maintained throughout its       length. Many shanks can be clamped directly into the
    extensive operation, enhancing tool life and workpiece      holder with or without any collets.
    quality.




                         Valve handle in position T                                          Pump and valve handles in
                         for entering and releasing of                                       position A for clamping.
                         tool.


D




                         Valve handle in position T                                          Pump and valve handles in
                         after clamping of the tool.                                         position B for releasing

    D 98
                                   CoroGrip®           TOOLHOLDING SYSTEMS
Extend your reach with CoroGrip® pencil collet
New CoroGrip pencil collets allow you to reach even fur-
ther, when using long overhangs in die and mould appli-
cations. Available in a 20 mm outer diameter, the collet
can accept four different sizes of tool shank: 6, 8, 10 and
12 mm. So maximum versatility is assured.
Using the CoroGrip pencil collet gives you a three-fold
advantage:
• Machining in cavities and pockets with improved
    productivity!
• No compromise in stability while reaching further –
    improved bending stiffness.
• Improved tool life – up to four times longer.
A laser marking on the collet indicates the maximum
recommended protrusion for undiminished clamping
force. Never exceed this position! Always use in line with
Coromant recommendations!
Only to be used in combination with CoroGrip chucks.




Easy handling allows tool change in
less than 20 seconds
The high clamping force required for the CoroGrip
system is generated by an external hydraulic pump.
This provides a pressure of 700 bar for operating the
clamping and releasing mechanism. As the
mechanism is self-locking, no hydraulic pressure is
retained during machining.
The pressure is always 700 bar – for all chuck sizes –
so there is no risk of failure.
Three different hydralic pumps are avalable for changing
tools in the CoroGrip holder - a manual hand pump and
two pneumatic motor driven pumps. The latter use the
regular pneumatic air available in the work shop (min. 5
bar required).                                                                      D
By using either of these pumps, tool changing is
ergonomically and easily performed in less than 20 sec-
onds - and the same gripping force is always applied to
the tool shank.




Pre-setting
Also pre-setting of the tool is an easy operation with the
CoroGrip concept.
By using an optical reader, and depending on its
accuracy, the tool length can be set within +/- 3-5 mi-
crons. The tool is guaranteed to maintain its axial position
during the whole clamping process.



                                                                             D 99
                 TOOLHOLDING SYSTEMS                                                                     CoroGrip®

     CoroGrip®
     Precision Power Chuck
     Coromant Capto®
     391.HMD


                                                                                                                          Accessories
                                                                                                                                                     393.CG
                                                                                                                          Not delivered with the     393.CGS
                                                                                                                          tool, must be ordered
                                                                                                                          separately.

                                                                                                                          See page                  D 125-D 126
                                Individually balanced, C3, C4, C5 and C6, G2.5 at 25 000 rpm                              For pumps, see page D 103.
                                                       C8, G2.5 at 14 000 rpm

     Coupling   Ordering code         Dimensions, mm                                                                                    Collets
     size                                                                                                                               393.CG
                                                                                                                                        393.CGS
                                                                                                                KG
                                      dmt    D5m   D21   D22         lc1         lc2         l1      l22                                Size
       C3       C3-391.HMD-06 049 06         32    27    24           40         34           49         6     0,2                         -
                          -12 049 12         32    36    34           40         –            49         7,5   0,2                        12
       C4       C4-391.HMD-06 050 06         40    27    24           40         30           50      6        0,2                         -
                          -12 052 12         40    36    34           42         32           52      7,5      0,3                        12
                          -20 069 20         40    55    52           59         –            69     17        0.7                        20
       C5       C5-391.HMD-12 052 12         50    36    34           41         32           52      7,5      0,5                        12
                          -20 070 20         50    55    52           59         –            70     17        0,9                        20
                          -25 078 25         50    67    62           67         –            78     22,25     1,4                        25
       C6       C6-391.HMD-20 071 20         63    55    52           57         49           71     17        1,2                        20
                          -25 080 25         63    67    62           66         58           80     22,25     1,8                        25
                          -32 095 32         63    81    76           81         –            95     29,5      2,4                        32
       C8       C8-391.HMD-32 102 32         80    81    76           90.5 71,5              101.5 29,5        3,5                        32



                                                                                                               Ordering example: 2 pieces C3-391.HMD-06 049




     CoroGrip® chuck extension
     Plain parallel shank
     393.HMD
                                                                                                                          Accessories
D                                                                                                                                                    393.CG
                                                                                                                                                     393.CGS
                                                                                                                          Not delivered with the
                                                                                                                          tool, must be ordered
                                                                                                                          separately.

                                                                                                                          See page                  D 125-D 126
                                                                                                                          For pumps, see page D 103.
                                        Individually balanced, G2.5 at 25 000 rpm

    Chuck extension                                                                                                                        Collet
                                                                                                                                           size
    Ordering            Dimensions, mm
    code
                        dmm      dmt        D21    D22         lc1         lc2         l1          l22          KG



    393.HMD-25 06 200   25       06         27     26          40          28          200         6           1,0                           -
            32 12 250   32       12         36     34          40          32          250         7,5         1,5                          12
                                                                                                               Ordering example: 2 pieces 393.HMD-25 06 200




    D 100
                                           CoroGrip®                   TOOLHOLDING SYSTEMS
 CoroGrip®
 Precision Power Chuck
 HSK form A/C
 392.410HMD
                                                                                                                           Accessories
                                                                                                                                                      393.CG
                                                                                                                           Not delivered with the     393.CGS
                                                                                                                           tool, must be ordered
                                                                                                                           separately.


                                   Individually balanced, 63-A/C, G2.5 at 25 000 rpm                                       See page                 D 125-D 126
                                                          100-A/C, G2.5 at 14 000 rpm                                      For pumps, see page D 103.
                               Note: Hole for data carrier is not standard.

Coupling       Ordering code              Dimensions, mm                                                                                    Collets
size                                                                                                                                        393.CG
                                                                                                                                            393.CGS

                                          dmt    D5m     D21     D22     D23         lc1        l1    l22           l23     KG
                                                                                                                                            Size
 63-A/C        392.410HMD -63 06 062      06      63     27      26      44           40    62         6            36     0,7               -
                          -63 12 065      12      63     36      34      44           40    65         7,5          39     0,8               12
                          -63 20 077      20      63     55      52      –            52    77        17            51     1,2               20
                          -63 25 100      25      63     67      62      –            66 100          22,25         74     1,9               25
 100-A/C       392.410HMD -100 20 084     20     100     55      52      –            52    83,5      17            54,5   2,6               20
                          -100 25 090     25     100     67      62      –            58    89,5      22,25         60,5   3,2               25
                          -100 32 103     32     100     81      76      –            71,5 103        29,5          74     3,7               32

Coolant tube must be ordered separately, see page D 96.                                               Ordering example: 2 pieces 392.410HMD-63 06 062




 CoroGrip®
 Precision Power Chuck
 HSK form E
 392.417HMD
                                                                                                                           Accessories
                                                                                                                                                      393.CG
                                                                                                                           Not delivered with the     393.CGS
                                                                                                                           tool, must be ordered
                                                                                                                           separately.

                                                                                                                           See page                 D 125-D 126
                                                                                                                           For pumps, see page D 103.                   D
                                   Individually balanced, G2.5 at 25 000 rpm

Coupling       Ordering code              Dimensions, mm                                                                                    Collets
size                                                                                                                                        393.CG
                                                                                                                                            393.CGS

                                                                                                                              KG
                                          dmt    D5m     D21     D22           lc1         l1        l3       l22                           Size
 HSK 32-E      392.417HMD -32 12 067      12     32      36      34            40           67       47        7,5            0,4            12
 HSK 40-E      392.417HMD -40 12 067      12     40      36      34            40           67       47        7,5            0,5            12
 HSK 50-E      392.417HMD -50 12 066      12     50      36      34            40           66       40        7,5            0,7            12
                          -50 20 091      20     50      55      52            57           91       65       17              1,3            20
 HSK 63-E      392.417HMD -63 12 065      12     63      36      34            40           65       39        7,5            1,1            12
                          -63 20 077      20     63      55      52            52           77       51       17              1,5            20
                          -63 25 100      25     63      67      63            66          100       74       22,25           2,0            25

For coolant tube (to be ordered separately), see page D 96.                                           Ordering example: 2 pieces 392.417HMD-32 12 067




                                                                                                                                                                D 101
                  TOOLHOLDING SYSTEMS                                                            CoroGrip®

     CoroGrip®
     Precision Power Chuck
     392.272HMD/ .55HMD/ .369HMD



                                                                                                                          Accessories
                                                                                                                                                          393.CG
                                                                                                                          Not delivered with the          393.CGS
                                                                                                                          tool, must be ordered
                                                                                                                          separately.

                                                                                                                          See page                       D 125-D 126
                                                                                                                          For pumps, see page D 103.
                                        Individually balanced, Taper 40, G2.5 at 25 000 rpm
                                                               Taper 50, G2.5 at 14 000 rpm

    Coupling         Taper   Ordering                     Dimensions, mm                                                                   Collet
    type             size    code                                                                                                          size


                                                                                                                                 KG
                     ISO                                  dmt   D21     D22          l1           l3           l22

    ISO 7388.1       40      392.272HMD-40 12 052         12    36      34           51,1             32        7,5             0,9         12
    DIN 69871-B      40                -40 20 085         20    55      52           84,1             65       17               1,3         20
    Form A/B         40                -40 25 094         25    67      62           93,1             74       22,25            1,9         25
                     50                -50 20 069         20    55      52           68,1             49       17               3,0         20
                     50                -50 25 078         25    67      62           77,1             58       22,25            3,6         25
                     50                -50 32 091         32    81      76           90,6             71,5     29,5             4,1         32
    MAS/BT 403       30      392.55HMD -30 06 052         06    27      24           52               30        6               0,7          -
                     30                -30 12 054         12    36      34           54               32        7,5             0,9         12
                     30                -30 20 071         20    55      52           71               49       17               1,1         20
    MAS/BT 403       40      392.369HMD-40 12 059         12    36      34           59               32        7,5             1,1         12
    Form A/B         40                -40 20 076         20    55      52           76               49       17               1,5         20
                     40                -40 25 085         25    67      63           85           –            22,25            1,9         25
                     50                -50 20 087         20    55      52           87               49       17               3,8         20
                     50                -50 25 096         25    67      62           96               58       22,25            4,5         25
                     50                -50 32 110         32    81      76          109,5             71,5     29,5             4,9         32
                                                                                                       Ordering example: 2 pieces 392.140HMD-40 12 052




     CoroGrip®                                                                                             Max recommended protrusion
     Pencil collet
     393.CGP
D




    Collet size   Ordering code                           Dimensions, mm

                                                                                                                                             Min. tool length to
                                                                                                                                      KG
                                                                                                                                             be clamped inside
                                                          dmm     dmt         D22           lc         l2            l3   l21                collet

    20               393.CGP- 20   06   72                20       6           9            17         37            72   21      0,1        6   x   D
                              20   08   72                20       8          11            17         37            72   21      0,1        4   x   D
                              20   10   72                20      10          13            17         41            72   21      0,1        4   x   D
                              20   12   72                20      12          15            17         41            72   21      0,1        3   x   D
                                                                                                              Ordering example: 2 pieces 393.CGP-20 06 72




    D 102
                                         CoroGrip®              TOOLHOLDING SYSTEMS
 Hydralic pump equipment
 Hand pump                                      Pneumatic pump                                    Pneumatic bench pump
 Handle, manual switch with pressure            Handle, foot pedal, switch with pressure          Handle, manual switch with pressure
 gauge included.                                gauge included)                                   gauge included.




 Ordering code                                  Ordering code                                    Ordering code
 391.HPUMP-12 32 A                              391.PPUMP-12 32 A                                391.BPUMP-12 32 A




Accessories included with the pump
 Handle                                Dimensions, mm




                                       dmt                         Handle                  Nozzle kit
                                       6 – 32                      391.HANDLE-06 32 B       5472 010-01A



                                                                                                 Ordering example 1 piece 391.HANDLE-06 32 B




                                                                                                                                                D




                                                                                                                                        D 103
                   TOOLHOLDING SYSTEMS                                              HydroGrip®




    HydroGrip® high precision chuck
    Satisfies the highest demands regarding:

        High accuracy                High clamping                High rotating       Easy handling                 Versatility
                                         force                       speed




               3 µm               3 times a conv. chuck          Up to 25 000 RPM    Compact design,               For use in most
                                                                    as standard      hydraulic                        machines




    Small radial run out
    The run out at the front of the chuck (B) is less than 3 µm.                          A          B
    At a distance of 4 × tool diameter from the front, the run out is
    less than 10 µm.
    With each chuck an individual measuring report is enclosed. In
    this report you can find:                                                        Dc
    - radial run out at the front of the chuck
    - radial run out at a distance of 4 × d from the front                                    4xDc
    - measured clamping power (Nm)




    Axial tool stop
    The hole through the taper is threaded in the front end. In this
    hole a M8 screw can be inserted to act as tool stop. When cut-
    ting fluid is required through the flange, the screw will act as a
    spindle seal. If cutting fluid is required through the spindle, a 3,5                                 M8
D   mm dia hole should be drilled through the screw.



                                                                                                     Dia. 3,5 mm




     Warning!
                                                                                                                     Minimum
     Never tighten the pressure screw without having a tool
     with the right shank diameter and style in the chuck.                                                           clamping
     Direct clamping without collet is only permitted with cy-                                                       length
     lindrical shanks.



                                                                                                                                Max.
                                                                                                                                3 mm




    D 104
                                              HydroGrip®                      TOOLHOLDING SYSTEMS
 HydroGrip®
 Coromant Capto®
 High precision chuck adaptor
 Short version
 391.CGA
                                                                                                                                          Accessories
                                                                                                                                                                        393.CG
                                                                                                                                          Not delivered with the        393.CGS
                                                                                                                                          tool, must be ordered
                                                                                                                                          separately.

                                                                                                                                          See page                   D 125-D 126
                                                    lc2 = Min clamping length
                                                                                                                                                             l1 = programming length

Coupling       Ordering                 Dimensions, mm                                                                                                Collets
size           code                                                                                                                                   393.CG
                                                                                                                                                      393.CGS
                   Prebalanced
                                        D5m    dmt      D21     D22    lc1      lc2         l1         l3     l21   l22        KG
                                                                                                                                        Max rpm       Size          Clamping key1)
C4             C4-391.CGA-12 062        40     12       56      24     41       38          62         41     20    14       0,7        25 000        12            5680 017-02
C5             C5-391.CGA-20 074        50     20       65      31     52       49          74         53     20    26       1,2        25 000        20            5680 017-02
C6             C6-391.CGA-32 084        63     32       81      52     61       58          84         61     20    34       2,1        20 000        32            5680 017-02


1) Accessories,   not delivered with the tool, must be ordered separately.                                                 Ordering example: 2 pieces C4-391.CGA-12 062


 Pencil HydroGrip®                                                           Design B                                      Design A

 High precision chuck adaptor
 Coromant Capto®
 391.CGB

                                                              Design C


                                                                                                                                          Accessories
                                                                                                                                                                        393.CG
                                                                                                                                          Not delivered with the        393.CGS
                                                                                                                                          tool, must be ordered
                                                                                                                                          separately.

                                                                                                                                          See page                   D 125-D 126
  lc2 = Min clamping length                                                                                                                                  l1 = programming length

Coupling       Ordering code                    Dimensions, mm                                                                                                             Collets
size                                                                                                                                                                       393.CG
                                                                                                                                                                           393.CGS        D
                   Prebalanced         Front                                                                                                          KG
                                       design dmt D5m D1             D21     D22      lc1        lc2    l1    l3     l21     l22    l23    l24                 Max rpm Size
C4             C4-391.CGB- 06 086      A        6      40     40     12      -        40         30      86    50    –       –      –      –        0,5        25 000      -
                           12 098A     A       12      40     40     19,5    -        40         37      98    50    –       –      –      –        0,7        25 000     12
                           12 148A     A       12      40     40     19,5    -        40         37     148   100    –       –      –      –        0,8        15 000     12
                           12 198A     B       12      40     40     19,5    24,5     40         37     198   150    50      75     –      –        0,9        15 000     12
C5             C5-391.CGB- 06 086      A        6      50     40     12      –        40         30      86    50    –       –       66    –        0,7        25 000          -
                           12 086      A       12      50     40     19,5    –        40         37      86    50    –       –       66    –        1,0        25 000         12
                           12 136      A       12      50     40     19,5    –        40         37     136   100    –       –      116    –        1,1        15 000         12
                           12 186      B       12      50     40     19,5    24,5     40         37     186   150    50      75     166    –        1,2        15 000         12
                           20 158A     C       20      50     40     32      –        52         49     158   110    –       –      138    60       1,3        15 000         20
                           20 238A     C       20      50     40     32      –        52         49     238   190    –       –      218    60       1,7        10 000         20
C6             C6-391.CGB- 06 088      A        6      63     40     12               40         30      88    50    –       –       66    –        1,9        25 000          -
                           12 092A     A       12      63     40     19,5    –        40         37      92    50    –       –       70    –        1,1        25 000         12
                           12 142A     A       12      63     40     19,5    –        40         37     142   100    –       –      120    –        1,3        15 000         12
                           12 192A     B       12      63     40     19,5    24,5     40         37     192   150    50      75     170    –        1,5        15 000         12
                           20 152A     C       20      63     40     32      –        52         49     152   110    –       –      130    60       1,9        15 000         20
                           20 232A     C       20      63     40     32      –        52         49     232   190    –       –      210    60       2,9        10 000         20
                                                                                                                           Ordering example: 2 pieces C4-391.CGB-06 086


       D 166

                                                                                                                                                                                  D 105
                    TOOLHOLDING SYSTEMS                                HydroGrip®

     Coromant HydroGrip®
     High precision chuck
     392.140CG/ .272CG/ .55CG/ .00CG




                                                                                                  Accessories
                                                                                                                            393.CG
                                                                                                  Not delivered with the    393.CGS
                                                                                                  tool, must be ordered
                                                                                                  separately.


                                                                                                  See page                 D 125-D 126
                                Prebalanced
                                                                                                               I1 = programming length

    Spindle           Taper   Ordering              Dimensions, mm                                                             Collet
    design                    code                                                                                             size


                      ISO                           dmt   D21   D22   lc1    l1       l21   α21       KG
                                                                                                               Max rpm
    ISO 7388.1        40      392.140CG-40 20 060   20    65    34    50     60       52    20       1,5       25 000          20
    DIN 69871-A       50      392.140CG-50 32 068   32    81    46    57,8   68       52    45       3,7       14 000          32
    DIN 69871-B       40      392.272CG-40 20 060   20    65    34    50     60       52    20       1,5       25 000          20
                      50      392.272CG-50 32 068   32    81    46    57,9   68       60    45       3,7       14 000          32
    MAS/BT 403        40      392.55CG-40 20 056    20    65    34    50     56       52    20       1,5       25 000          20
                      50      392.55CG-50 32 075    32    81    46    57,9   75       60    45       3,7       14 000          32
    DIN 2080          40      392.00CG-40 20 052    20    65    34    50     52       52    20       1,5       25 000          20
                      50      392.00CG-50 32 064    32    81    46    57,9   64       60    45       3,7       14 000          32



                                                                                  Ordering example: 2 pieces 392.140CG-40 20 060




D




            D 166


    D 106
                                                HydroGrip®                  TOOLHOLDING SYSTEMS
 HydroGrip® high precision chuck
 HSK
 Short version
 392.410CGA

                                                                                                                                     Accessories
                                                                                                                                                                   393.CG
                                                                                                                                         Not delivered with the    393.CGS
                                                                                                                                         tool, must be ordered
                                                                                                                                         separately.
                                         lc2 = Min clamping length
                                                                                                                                        See page                D 125-D 126
                                         Note: Hole for data carrier is not standard.
                                                                                                                                                           l1 = programming length

HSK             Ordering code                    Dimensions, mm                                                                                                   Collets
size                                                                                                                                                              393.CG
                                                                                                                                                                  393.CGS
                   Prebalanced
                                                                                                                                     KG
                                                 D5m    dmt     D21    D22         l1      lc1     lc2          l21         l22                   Max rpm         Size
 63-A/C         392.410CGA- 63 12 076A            63    12      56     24           76     41      38           20          14      1,2           25 000           12
                            63 20 088A            63    20      65     31           88     53      50           20          26      1,5           25 000           20
                            63 32 096A            63    32      81     52           96     61      58           20          34      2,1           25 000           32
100-A/C         392.410CGA- 100 12 079A 100             12      56     24           79     41      38           20          14      2,8           14 000           12
                            100 20 091A 100             20      65     31           91     53      50           20          26      3,1           14 000           20
                            100 32 099A 100             32      81     52           99     61      58           20          34      3,6           14 000           32
Coolant tube must be ordered separately, see page D 96.                                                       Ordering example: 2 pieces 392.410CGA-63 12 076A




 HydroGrip® high precision chuck
 HSK                                                                           Design B
 Pencil type
 392.410CGB




                                                Design A                                                                                 Accessories
                                                                                                                                                                    393.CG
                                                                                                                                          Not delivered with the    393.CGS
                                                                                                                                          tool, must be ordered
                                                                                                                                          separately.


                                                                                                                                         See page                 D 125-D 126
                                                                                                                                                                                      D
 Note: Hole for data carrier is not standard.                                                                               lc2 = Min clamping length, l1 = programming length

HSK             Ordering code                            Dimensions, mm                                                                                              Collets
size                                                                                                                                                                 393.CG
                                                                                                                                                                     393.CGS
                    Prebalanced                 Front                                                                                        KG
                                                design D5m dmt D1           D21 D22 lc1          lc2     l1           l3     l21   l22                 Max rpm Size
 63-A/C         392.410CGB- 63 06 095            A         63    6    40    12      –      40    30       94,5 50            –     –       1,0         25 000             -
                            63 12 112B           A         63   12    40    19,5    –      40    37      112    50           –     –       1,2         15 000            12
                            63 12 162B           A         63   12    40    19,5    –      40    37      162   100           –     –       1,3         15 000            12
                            63 12 212B           B         63   12    40    19,5    24,5   40    37      212   150           50    75      1,6         15 000            12
100-A/C         392.410CGB- 100 12 115B          A       100    12    40    19,5 –    40         37      115           50    –     –       2,8         15 000            12
                            100 12 165B          A       100    12    40    19,5 –    40         37      165          100    –     –       2,9         15 000            12
                            100 12 215B          B       100    12    40    19,5 24,5 40         37      215          150    50    75      3,1         10 000            12
Coolant tube must be ordered separately, see page D 96.                                                        Ordering example: 2 pieces 392.410CGB-63 06 095




       D 166

                                                                                                                                                                              D 107
                  TOOLHOLDING SYSTEMS                                             CoroMill® modular cutting tools


    CoroMill® modular cutting tools
    A system of small CoroMill® screw type cutters and a variety of shanks
    for demanding die and mould making.

                                                   Coromant Capto®               ISO/ MAS                    HSK
                                                   Page D 109                    Page D 111                  Page D 110
            Damped milling adaptor


    Coromant Capto®         HSK
    Page D 109              Page D 110




                                                                                                                         Basic holders




                                                     Solid carbide
                                                     extension                                            Intermediate
                                                     Page D 113                                               adaptors
                                                                                                            Page D 112




                        For productive vibration       CoroMill® cutters
                            free machining




            Turn on the Silence
D
                                                                     CoroMill® 390            CoroMill® 300        CoroMill® Ball Nose
                                                                     Page A 32                Page A 69            Page A 74


    Silent Tools is a definition of tool holders
    made to reduce vibrations due to a damper             Tool set-ups with CoroMill® performance
    inside the tool body and is a trade mark of
    Teeness ASA.                                          Slim, but rigid assemblies with accessibility for milling of deep and
                                                          narrow cavities.
                                                          Opportunities to optimise the total gauge length of the set-up for
                                                          best performance in each application.
                                                          Many tool solutions with minimum number of modules will reduce
                                                          inventory costs.
                                                          Damped milling adaptor for high productivity at extremely long
                                                          overhangs – with no vibration.




    D 108
        CoroMill® modular cutting tools   TOOLHOLDING SYSTEMS
Coromant Capto® adaptor
Shank with threaded coupling
391.T
                                                                                           CoroMill® 390
                                                                                           Page A 32



                                                                                            CoroMill® 300
                                                                                            Page A 69



                                                                                      CoroMill® Ball Nose
     Balanced by design                                                               Page A 74


Coupling      Ordering code                 Dimensions, mm
size


                                                                                                      KG
                                            Dth    D5t         D5m         l1          l3

C3            C3-391.T -08 060              M8     12,8        32           60         37,8       0,16
                       -10 070              M10    17,8        32           70         48,5       0,20
C4            C4-391.T -08 070              M8     12,8        40           70         41,8       0,30
                       -10 080              M10    17,8        40           80         52,4       0,35
                       -12 080              M12    20,8        40           80         52,8       0,41
C5            C5-391.T -08 070              M8     12,8        50           70         40,4       0,49
                       -10 080              M10    17,8        50           80         51,1       0,54
                       -12 080              M12    20,8        50           80         51,5       0,57
                       -16 080              M16    28,8        50           80         52,6       0,70
C6            C6-391.T -08 070              M8     12,8        63           70         35,1       0,90
                       -10 090              M10    17,8        63           90         55,8       0,90
                       -12 100              M12    20,8        63          100         66,2       0,98
                       -16 100              M16    28,8        63          100         67,3       1,10
                                                                         Ordering example: 2 pieces C3-391.T-08 060




Coromant Capto® Damped milling adaptor
Shank with threaded coupling
391.TD
                                                                                           CoroMill® 390
                                                                                           Page A 32



                                                                                            CoroMill® 300
                                                                                            Page A 69                             D


                                                                                      CoroMill® Ball Nose
                                                                                      Page A 74

Coupling      Ordering code                 Dimensions, mm
size


                                            Dth   D5t     D5m       D1          l1    l3        l21        l22    α        KG




C4            C4-391.TD -10 175             M10   17,8    40        30          175   150       10,5       13,5   2,098   0,98

C5            C5-391.TD -12 186             M12   21      50        34          186   160       12,2       15,5   1,782   1,48
                        -16 279             M16   29      50        50          279   259       15,8       19     2,148   3,40

C6            C6-391.TD -16 279             M16   29      63        50          279   251,6 15,8           19     2,216   3,76

                                                                     Ordering example: 2 pieces C4-391.TD-10 175


                                                                                                                          D 109
                TOOLHOLDING SYSTEMS               CoroMill® modular cutting tools

     HSK 63 Form A/C
     Shank with threaded coupling
     392.410T
                                                                                CoroMill® 390
                                                                                Page A 32



                                                                                     CoroMill® 300
                                                                                     Page A 69



                                                                                CoroMill® Ball Nose
                                                                                Page A 74


    Coupling    Ordering code          Dimensions, mm
    size


                                                                                                            KG
                                       Dth    D5t          D21       D5m        l1         l3

    HSK 63-A/C 392.410T -63 08 084     M8     12,8         20        63          84         50         0,79
                        -63 08 134     M8     12,8         25        63         134        100         0,93
    HSK 63-A/C 392.410T -63 10 084     M10    17,8         24        63          84         50         0,84
                        -63 10 134     M10    17,8         32        63         134        100         1,09
    HSK 63-A/C 392.410T -63 12 084     M12    20,8         24        63          84         50         0,85
                        -63 12 134     M12    20,8         36        63         134        100         1,19
    HSK 63-A/C 392.410T -63 16 084     M16    28,8         34        63          84         50         0,98
                        -63 16 134     M16    28,8         41        63         134        100         1,49
                                                                Ordering example: 2 pieces 392.410T-63 08 084




     HSK 63 Form A/C
     Damped milling adaptor
     Shank with threaded coupling                                               CoroMill® 390
     392.410TD                                                                  Page A 32



                                                                                     CoroMill® 300
D                                                                                    Page A 69



                                                                                CoroMill® Ball Nose
                                                                                Page A 74


    Coupling    Ordering code          Dimensions, mm
    size


                                       Dth   D1      D5t     D21    D5m    l1        l3         l21   l22        α      KG




    HSK 63-A/C 392.410TD -63 10 183A   M10   30      17,8 20        63     183 150,1 10,5 13,5 2,094 1,2
                         -63 12 193A   M12   34      21   25        63     193 160,77 12,2 15,5 1,770 1,6
    HSK 63-A/C 392.410TD -63 16 280A   M16   50      29      32     63     280 252              15,8 19          2,212 3,5
                                                           Ordering example: 2 pieces 392.410TD-63 10 183A




    D 110
        CoroMill® modular cutting tools      TOOLHOLDING SYSTEMS
Solid holders
Shank with threaded coupling
392.140T
                                                                                CoroMill® 390
                                                                                Page A 32



                                                                                     CoroMill® 300
                                                                                     Page A 69



                                                                               CoroMill® Ball Nose
                                                                               Page A 74


Machine        Taper   Ordering code           Dimensions, mm
design         size


                                                                                            KG
                                               Dth    D5t       D21     l1      l3
ISO7388/1      40      392.140T -40 08 058     M8     12,8      15     57,1    30       0,92
Din 69871                       -40 08 098     M8     12,8      23     97,1    70       1,02
                                -40 10 058     M10    17,8      20     57,1    30       0,96
                                -40 10 098     M10    17,8      28     97,1    70       1,12
                                -40 12 058     M12    20,8      24     57,1    30       0,98
                                -40 12 098     M12    20,8      31     97,1    70       1,18
                                -40 16 058     M16    28,8      28,8   57,1    30       1,03
                                -40 16 098     M16    28,8      34     97,1    70       1,28
               40      392.55T -40 08 058      M8     12,8      15     57,1    30       1,08
MAS BT                          -40 08 098     M8     12,8      23     97,1    70       1,20
(JIS B 6339)                    -40 10 058     M10    17,8      20     57,1    30       1,11
                                -40 10 098     M10    17,8      28     97,1    70       1,27
                                -40 12 058     M12    20,8      24     57,1    30       1,14
                                -40 12 098     M12    20,8      31     97,1    70       1,34
                                -40 16 058     M16    28,8      28,8   57,1    30       1,18
                                -40 16 098     M16    28,8      34     97,1    70       1,45
                                                                   Ordering example: 2 pieces 392.140T-40 08 058




                                                                                                                   D




                                                                                                          D 111
               TOOLHOLDING SYSTEMS            CoroMill® modular cutting tools

     Reduction adaptor
     Shank with threaded coupling
     391.02T
                                                                         CoroMill® 390
                                                                         Page A 32



                                                                              CoroMill® 300
                                                                              Page A 69



                                                                        CoroMill® Ball Nose
                                                                        Page A 74

    Thread    Ordering code          Dimensions, mm
    size


                                                                                      KG
                                     Dth    dth       D5t        D5m     l1
    M10       391.02T -08 10 030     M10    M8        12,8       17,8    30         0,06
    M12               -08 12 040     M12    M8        12,8       20,8    40         0,09
    M12               -08 12 060     M12    M8        12,8       20,8    60         0,12
    M12               -08 12 080     M12    M8        12,8       20,8    80         0,16
    M16               -08 16 060     M16    M8        12,8       28,8    60         0,20
    M16               -08 16 080     M16    M8        12,8       28,8    80         0,25
    M12       391.02T -10 12 035     M12    M10       17,8       20,8    35         0,09
    M16               -10 16 060     M16    M10       17,8       28,8    60         0,29
    M16               -10 16 080     M16    M10       17,8       28,8    80         0,29
    M16       391.02T -12 16 040     M16    M12       20,8       28,8    40         0,17
                                                             Ordering example: 2 pieces 391.02T-08 10 030




     Extension adaptor
     Shank with threaded coupling
     391.01T

                                                                              CoroMill® 390 Page A 32



                                                                              CoroMill® 300 Page A 69
D
                                                                        CoroMill® Ball Nose Page A 74


    Thread    Ordering code          Dimensions, mm
    size


                                                                                            KG
                                     Dth    dth       D5t        D5m     l1
    M8        391.01T   -08 08 030   M8     M8        12,8       12,8    30                0,04
    M10       391.01T   -10 10 035   M10    M10       17,8       17,8    35                0,07
    M12       391.01T   -12 12 040   M12    M12       20,8       20,8    40                0,11
    M16       391.01T   -16 16 040   M16    M16       28,8       28,8    40                0,20
                                                             Ordering example: 2 pieces 391.01T-08 08 030




    D 112
     CoroMill® modular cutting tools   TOOLHOLDING SYSTEMS
Cylindrical solid carbide shank extensions
Shank with threaded coupling
393.T

                                                                                 CoroMill® 390 Page A 32



                                                                                     CoroMill® 300 Page A 69


                                                                              CoroMill® Ball Nose Page A 74

         Ordering code                     Dimensions, mm



                                                                                            KG
                                           Dth    D5t       dmm        l2      l21
         393.T -16 08 110                  M8     12,8      16         115      60        0,3
               -16 08 150                  M8     12,8      16         155     100        0,4
         393.T -20 10 115                  M10    17,8      20        120       60     0,2
               -20 10 175                  M10    17,8      20        180      120     0,3
                                                                     Ordering example: 2 pieces 393.T-16 08 110




Morse taper extensions
Shank with threaded coupling
393.42T
                                                                                 CoroMill® 390 Page A 32



                                                                                     CoroMill® 300 Page A 69

                                                                                                                   D
                                                                              CoroMill® Ball Nose Page A 74


         Ordering code                     Dimensions, mm



                                                                                KG
                                       M   Dth    D5t       D21        l3
         393.42T -02 08 040            2   M8     12,8      12,8       40      0,1
                 -02 10 060            2   M10    17,8      17,8       60      0,2
         393.42T -03 12 030            3   M12    20,8      24         30      0,3
                 -03 12 060            3   M12    20,8      24         60      0,
         393.42T -04 16 035            4   M16    28,8      31,5       35      0,7
                 -04 16 095            4   M16    28,8      31,5       95      1,0
                                                                   Ordering example: 2 pieces 393.42T-02 08 040




                                                                                                           D 113
Adjustable Coromant U drill holder                            TOOLHOLDING SYSTEMS
 Adjustable Coromant U drill holders
 392.140277 / .410277 / .55277 / .58277                                                                                                           392.140277
                                                                                                                                                     .55277
                                                                                                                                                     .58277




                                                                                                               392.272277
                                                                                                               Coolant through
                                                                                                               flange
                                 Diametrical adjustment in increments
                                 of 0,05 mm: –0,4
                                              +1,4

                                 Note: Drill should not be adjusted below nominal diameter.                                              l1 = programming length

Machine             Taper         Ordering code                     Dimensions, mm                                                                           Slide
design                                                                                                                                                       size

                    ISO                                             D5m          D1        l1           l21         KG



                    40             392.140277-40 01 055 A           –             86       55           79,6       2,2                                       01
DIN 69871-A
                    50             392.140277-50 02 055 A           –            106       55           79,6       4,7                                       02
                    50             392.140277-50 03 075 A           –            140       75           85         6,5                                       03
                    40             392.272277-40 01 055 A           –             86       55           79,6       2,2                                       01
DIN 69871-B
                    50             392.272277-50 02 055 A           –            106       55           79,6       4,7                                       02
                    50             392.272277-50 03 075 A           –            140       75           85         6,5                                       03
                    40             392.55277-40 01 055 A            –             86       55           79,6       2,1                                       01
MAS-BT
                    50             392.58277-50 02 055 A            –            106       55           79,6       4,4                                       02
                    50             392.58277-50 03 080 A            –            140       80          90       6,5                     03
Slides must be ordered separately, see page D 116.                                              Ordering example: 2 pieces 392.140277-40 01 055 A




                                                                                                                         D5m
 Adjustable Coromant U drill holders
 HSK
 392.410 277
                                                                                                                                             l1
                                                                                                                                                  l21

                                  Diametrical adjustment in increments                                               4   2   0   2   4
                                                                                                                                                                          D
                                  of 0,05 mm: –0,4
                                               +1,4
                                                                                                                             D1
                                  Note: Hole for data carrier is not standard.
                                        Drill should not be adjusted below nominal diameter.
                                                                                                                                         l1 = programming length

HSK              Ordering code                Dimensions, mm                                                                                        Slide
size                                                                                                                                                393.277


                                                                                      KG
                                              D5m     D1       l1         l21                                                                       Size
HSK 63-A/C       392.410 277-63 01 060 B       63       86     60         84,6    1,8                                                                   01
HSK 100-A/C      392.410 277-100 02 065 A     100     106      65         89,6    4,3                                                                   02
HSK-A 100        392.410 277-100 03 085 A     100     140      85         95      6,3                                                                   03
Slides must be ordered separately, see page D116.                                               Ordering example: 2 pieces 392.410 277-63 01 060 A
Coolant tube must be ordered separately, see page D 96.




       D 167       D 117

                                                                                                                                                                  D 115
                  TOOLHOLDING SYSTEMS                                                                        Adjustable Coromant U drill holder

     Adjustable Coromant U drill adaptors
     391.277
                                 Coromant Capto®


                                Diametrical adjustment in increments
                                of 0,05 mm: –0,4
                                             +1,4
                                Note: Drill should not be adjusted below nominal diameter.
                                                                                                                                                 l1 = programming length

    Coupling    Ordering code                          Dimensions, mm                                                                                             Slide
    size                                                                                                                                                          size

                                                       D5m           D1           l1          l21            KG




    C5          C5-391.277-01 040 A                    50             86          40          64,6        1,6                                             01
    C6          C6-391.277-01 040 B                    63             86          40          64,6        1,9                                             01
                            02 045 A                   63            106          45          69,6        2,9                                             02
     C8         C8-391.277-02 050 A                    80            106          50          74,6        3,5                                             02
    Slides must be ordered separately.                                                                               Ordering example: 2 pieces C5-391.277-01 040 A


     Adjustable Coromant U drill adaptors
     391.277
                               Varilock

                                       Diametrical adjustment in increments
                                       of 0,05 mm: –0,4
                                                    +1,4
                                       Note: Drill should not be adjusted below nominal diameter.
                                                                                                                                                 l1 = programming length

    Coupling    Ordering code              Dimensions, mm                                                                                                         Slide
    size                                                                                                                                                          size

                                           D5m       D1         l1              l21           KG




    50          391.277-01 50 040 A        50         86        40              64,6         1,5                                                                    01
    80          391.277-02 80 045 A        80        106        45              69,6         2,8                                                                    02
    Slides must be ordered separately.                                                                                Ordering example: 2 pieces 391.277-01 50 040 A


     Slide for adjustable Coromant U drill holders
     Shank according to ISO 9766
D    393.277
                                                                                                    Sleeve for smaller drill shanks
                                                                                                     Slide        Ordering code
                                                                                                     size                                 dmm   dmt     D1   l1      l3
                                                                                                     03           393.277-40 32 074 A     40    32      48   4       74

                                                                                                                                                 l1 = programming length

    Slide      Ordering code                Dimensions, mm
    size
                                                                                                        KG
                                             dmt          D1              l1           l21
     01        393.277-20 01 075 A           20           40              75           43             0,7
                       25 01 080 A           25           45              80           48             0,8
     02        393.277-20 02 075 A           20           40              75           43             1,0
                       25 02 085 A           25           45              85           54             1,2
                       32 02 085 A           32           52              85           54             1,3
     03        393.277-40 03 090 A           40           65              100          65             3,3                         D 117         D 167
                       50 03 100 A           50           75              110          75             3,7
                                                                                                                      Ordering example: 2 pieces 393.277-20 01 075 A


    D 116
This PDF document is divided into several files


   Please click here to continue

								
To top