Calibration PriCelist by mikeholy

VIEWS: 125 PAGES: 24

									Calibration PriCelist
Mitutoyo nederland bv




          Calibration prices
          Valid from 01-10-2010
                                                                    Why is technical competence
                                                                    so critical?
Mitutoyo is a world leader serving a global market place            m inimiSe R iSk
in dimensional metrology. To help industries implement              Throughout the world today, customers seek reassurance
and maintain their dimensional traceability to nationally or        that the products, materials or services they produce or
internationally recognized standards, Mitutoyo provides not         purchase meet their expectations or are conform to specific
only precision measuring instruments but also accredited            requirements. This often means that the product is sent to a
calibration services in various parts of the globe.                 laboratory to determine its characteristics against a standard
                                                                    or a specification. For the manufacturer or supplier, choosing
T echnical compe Tence                                              a technically competent laboratory minimises the risk of
(iSo9001 & iSo17025 guideline )                                     producing or supplying a faulty product.
The ISO 9001 standard is widely used in manufacturing and           a void e xpenSive R eTeSTing
service organisations to certify quality management systems.        Testing of products and materials can be expensive and time
Unlike certification to ISO 9001, ISO17025 uses besides quality     consuming, even when they are done correctly the first time.
management criteria also procedures specifically developed          If not done correctly, then the cost and time involved in re-
to determine technical competence, thus assuring customers          testing can be even higher if the product has failed to meet
that the test, calibration or measurement data supplied by the      specifications or expectations. Not only costs go up, but your
laboratory or inspection service are accurate and reliable.         reputation as a supplier or manufacturer can go down. You can
                                                                    also be held liable for any failure of your product, particularly
Specialist technical assessors conduct a thorough evaluation        if it involves public safety or financial loss to a client. Choosing
of all factors in a laboratory that affect the production of test   a technically competent laboratory minimises the chance of
or calibration data. Laboratory accreditation bodies use the        retesting being required.
ISO17025 standard to assess factors relevant to the laboratory’s    e nhance Y ouR c uSTomeRS ’ c onfidence
technical competence, including the:                                Confidence in your product is enhanced if clients know it has
•	 technical competency of staff;                                   been thoroughly evaluated by an independent, competent
•	 validity and appropriateness of calibration methods;             calibration facility. This is particularly so if you can demonstrate
•	 traceability of measurements and calibrations to national        to them that the laboratory itself has been evaluated by a
   standards;                                                       third party. Increasingly customers are relying on independent
•	 suitability, calibration and maintenance of test equipment;      evidence, rather than simply accepting a supplier’s word that
•	 calibration environment;                                         the product is “fit for purpose”.
•	 sampling, handling and transportation of calibration items;      R educe c oSTS and i mpRove a ccepT ance of Y ouR
•	 quality assurance of test and calibration data.                  g oodS o veRSeaS
                                                                    Through a system of international agreements, technically
                                                                    competent accredited laboratories receive a form of
                                                                    international recognition, which allows their data to be more
                                                                    readily accepted on overseas markets. This recognition helps
                                                                    to reduce costs for manufacturers and exporters that have
                                                                    their products or materials tested in accredited laboratories, by
                                                                    reducing or eliminating the need for retesting in the importing
                                                                    country.




  2
Dutch accreditation Council (raad voor accreditatie - rva)

a bouT The R v a                                                          ranges or uncertainties. This information is specified in the
The mission of the Dutch Accreditation Council (RvA) is to                laboratory’s scope of accreditation, issued by the accreditation
ensure that interested parties can have justified confidence in           body. The description in the scope of accreditation also has
all accreditations of conformity assessment provided by and               advantages for the customers of laboratories in enabling them
monitored by the RvA. By carrying out its job, the RvA strives to         to find the appropriate laboratory or testing service. These
make a contribution to society and to the quality-related image           days laboratory accreditation bodies publish the scopes of
of the Netherlands.                                                       accreditation for their accredited laboratories on the internet.

W haT iS accR ediTaTion ?                                                 h iSToRY (nko became R v a)
Laboratory accreditation is a means of determining the                    NKO (Nederlandse Kalibratie Organisatie) was established
technical competence of laboratories to perform specific types            in 1975 by the Dutch Ministry for Economic Affairs, in close
of testing, measurement and calibration. It also provides                 collaboration with the business world and government
formal recognition to competent laboratories, thus providing              institutions. The aim of NKO was
a ready means for customers to identify and select reliable               to improve the quality of the
testing, measurement and calibration services able to meet                metrology used in industry,
their needs. To maintain this recognition, laboratories are re-           education, conformity-certifying
evaluated periodically by the accreditation body to ensure their          bodies and the government.
continued compliance with requirements, and to check that                 In September 1995 NSS (NKO/
their standard of operation is being maintained. The laboratory           STERIN/STERLAB) and the Dutch
is also required to participate in relevant proficiency testing           Certification Council (RvC)
programs between reassessments, as a further demonstration                merged to become the Dutch
of technical competence. Accredited laboratories usually issue            Accreditation Council (RvA).
test or calibration reports bearing the accreditation body’s logo         Mitutoyo Nederland has a RvA-accreditation since 1994 (K 086).
or endorsement, as an indication of their accreditation. Clients
are encouraged to check with the laboratory as to what specific           Reference: http://www.rva.nl/
tests or measurements they are accredited for, and for what




R v a a cc RediT aTion logo and a ccRedi TaTion maRkS
An accreditation mark is the symbol used by the accredited body to communicate its accredited status.
An RvA accreditation mark is the combination of the RvA logo in association with an identification of the
accredited area and the registration number of the accredited body concerned.




The Mitutoyo Institute of Metrology organises the following courses on the subject of
calibration:
•	 Basic technics calibration
•	 Practical technics calibration
•	 Calibration technics for experts and quality managers

For information you can go to the Mitutoyo website www.mitutoyo.nl >>> Opleidingen or
you can ask for the brochure by email: mim@mitutoyo.nl.




                                                                                                                                    3
international laboratory accreditation Cooperation (ilaC)

i nT eRnaTional Recogni Tion                                                 ilac
Laboratory accreditation is highly regarded both nationally and              The ILAC Arrangement builds upon existing or developing
internationally as a reliable indicator of technical competence.             regional arrangements established around the world. The
Through a system of international agreements accredited                      European cooperation for Accreditation (EA) and the Asia
laboratories receive a form of international recognition,                    Pacific Laboratory Accreditation Cooperation (APLAC) are ILAC-
which allows their data to be accepted on overseas markets.                  recognized regions with acceptable MRAs.
Such international agreements, called mutual recognition
arrangements (MRAs), are crucial in enabling calibration                     Reference: http://www.ilac.org/
data to be accepted between these countries. In effect,
each partner in such an MRA recognises the other partner’s
accredited laboratories as if they themselves had undertaken
the accreditation of the other partner’s laboratories. This
recognition helps to reduce costs for manufacturers and
exporters that have their products or materials tested. The
ILAC Arrangement is to develop a global network of accredited
testing, calibration and inspection facilities that can be relied on
to provide accurate data.




   NMIJ           SPRING          NML       SIRIM      NIST          VSL         NPL        PTB        METAS        iNRiM        SP       INMETRO




                   SAC-
   JCSS                          CNLA       DSM        A2LA          RvA        UKAS        DKD         SAS          SIT       SWEDAC      RBC
                 SINGLAS

           APLAC                                                           EA
                                                              ILAC

  Mitutoyo        Mitutoyo      Mitutoyo   Mitutoyo   Mitutoyo   Mitutoyo       Mitutoyo   Mitutoyo   Mitutoyo      Mitutoyo   Mitutoyo   Mitutoyo
   Japan         Asia-Pacific    Taiwan    Malaysia     USA      Nederland        UK       Germany    Switzerland     Italy     Sweden     Brazil

                                                                     K086



Figure 1: ILAC-recognized regions with acceptable mutual recognition arrangements (MRAs).




  4
Contents measuring instruments

                                                        page                                                      page
l engTh                                                        l engTh   meaSuRing inSTRumenTS          (c onTinued )
   Square gauge block                                      6     Linear gauge                                       16
   Small rectangular gauge block                           6     Dial indicator                                     16
   Small rectangular gauge block (sets)                    6     Test indicator                                     16
   Long rectangular gauge block                            6     Thickness gauge                                    16
   Long rectangular gauge block (sets)                     6     i-Checker                                          16
   Caliper Calibration Set                                 7     Indicator Tester 170-102                           17
   Micrometer standard (flat measurement surfaces)         7     Indicator Tester 521-105 and 521-103               17
   Micrometer standard (sets)                              7     Height gauge                                       17
   Step gauge (check master)                               7     Low-force height gauge                             17
   Glass scale (projector scale)                           8     Linear height and QM-height                        17
   Line standard (vision scale)                            8     Profile projector                                  18
   Calibration plate (2D-Grid)                             8     Toolmaker Microscope, TM-500                       18
   Calibration chart (glass)                               8     Measurement microscope                             18
   Motic Calibration Slide                                 8     Quick Vision                                       18
R oughneSS        S pecimen                                      Quick Scope                                        18
   Type A1                                                 9     Quick Image                                        18
   Type A2                                                 9   R oughneSS     TeSTeRS
   Type B and C                                            9     Roundness tester                                   19
   Type D1                                                10   R oundneSS     TeSTeRS
R oundneSS        ST anda R dS                                   Roughness tester                                   19
   Hemisphere                                             10   d iameT eR
d iST anceS                                                      Setting ring (ring gauge)                          20
   Laser measurement                                      11     Master ball                                        20
l engTh    meaS uRing inSTR umenTS                             f oRm
   Caliper                                                11     Straight edge                                      21
   Plastic caliper                                        11     Knife edge straight edge                           21
   Carbon fiber caliper                                   11     Surface plate                                      21
   Build-in type caliper                                  12   c ooR dinaTe    meaSuRing machineS
   Depth type caliper                                     12     CMM                                                21
   Tire thread depth gage                                 12   a ngle
   Dial caliper gauge for outside measurements            12     Precision square                                   22
   Dial Caliper gauge for inside measurements             12     Quadra square master                               22
   Outside micrometer with interchangeable anvils         12     Spirit level                                       22
   Outside micrometer                                     13     Electronic level                                   22
   Outside micrometer (sets)                              13
   Limit micrometer with double spindle                   13
                                                               c alibRaTion     pRoceduRe                           23
   Inside micrometer "Mini- Holtest"(2 points)            13
   Inside micrometer "Mini- Holtest"(2 points) (sets)     14
   Bore gage for extra small holes                        14
   Inside micrometer (3 points)                           14
   Inside micrometer (3 points) (sets)                    14
   Caliper type inside micrometer                         15
   Tubular inside micrometer (2 points)                   15
   Micrometer head                                        15
   Micrometer with dial indicator                         15
   Dial snap micrometer                                   15
   Indicating micrometer                                  15




n oTe   T o deSc RipTion of ToolS :
l = measured length (m)
d = measured diameter (m)
pcs = pieces




                                                                                                                    5
Description                              Picture   Groupnr.            Range       Price in Euro

l engT h

Square gauge block                                  300           (0,1 - 100) mm        13,00
                                                    301          (100 - 500) mm        126,00
Best measurement capability (k=2):
0,05 µm + 0,7 · 10-6 · l

Variation in length: 0,04 µm




Small rectangular gauge block                       300          (0,1 - 100) mm         13,00

Best measurement capability (k=2):
0,05 µm + 0,7 · 10-6 · l

Variation in length: 0,04 µm


Small rectangular gauge block (sets)                310          2 gauge blocks        26,00
                                                    311          9 gauge blocks       117,00
Best measurement capability (k=2):                  312         10 gauge blocks       130,00
0,05 µm + 0,7 · 10-6 · l                            313         32 gauge blocks       416,00
                                                    314         46 gauge blocks       598,00
Variation in length: 0,04 µm                        315         47 gauge blocks       611,00
                                                    316         76 gauge blocks       988,00
                                                    317         87 gauge blocks      1131,00
                                                    318        103 gauge blocks      1339,00
                                                    319        112 gauge blocks      1456,00
                                                    320        122 gauge blocks      1586,00
Range for calibration: (0,1 - 100) mm



Long rectangular gauge block                        301         (>100 - 500) mm        126,00
                                                    302        (>500 - 1000) mm        126,00
Best measurement capability (k=2):                  303       (>1000 - 1500) mm        126,00
0,10 µm + 0,34 · 10-6 · l

Variation in length: 0,22 µm




Long rectangular gauge block (sets)                 321          8 gauge blocks      1008,00

Best measurement capability (k=2):
0,10 µm + 0,34 · 10-6 · l

Variation in length: 0,22 µm


Range for calibration: (100 - 1500) mm




  6
Description                                     Picture   Groupnr.            Range           Price in Euro




Caliper Calibration Set                                    326        (4 - 131,4) mm, 5 pcs       488,00
                                                           327       (20 - 131,4) mm, 3 pcs       307,00




Best measurement capability (k=2):
see rectangular gauge block on page 6
see setting ring on page 20




Micrometer standard (flat measurement surfaces)            340        (>25 - 1500) mm              15,00

Best measurement capability (k=2):
0,10 µm + 0,50 · 10-6 · l

Variation in length: 0,04 µm

Micrometer standard (sets)                                 341             5 standards             75,00
                                                           342            11 standards            165,00
Best measurement capability (k=2):
0,10 µm + 0,50 · 10-6 · l

Variation in length: 0,04 µm


Range for calibration: (>25 - 1500) mm



Step gauge (check master)                                  350            (0 - 310) mm           576,00
                                                           351            (0 - 450) mm           828,00
Best measurement capability (k=2):                         352            (0 - 610) mm          1116,00
0,12 µm + 0,34 · 10-6 · ls + 0,12 · 10-6 · lt              353            (0 - 750) mm          1368,00
                                                           354            (0 - 770) mm          1404,00
Variation in length: 0,06 µm                               355           (0 - 1010) mm          1836,00
                                                           356           (0 - 1150) mm          1972,00
                                                           357           (0 - 1510) mm          2584,00

                                                           358            (0 - 300) mm            324,00
                                                           359            (0 - 600) mm            432,00

                                                           360             26 surfaces            494,00
                                                           361             50 surfaces            926,00

                                                           362             22 surfaces            396,00
                                                           363             30 surfaces            540,00
                                                           364             26 surfaces            468,00

Koba step gauges                                           365             22 surfaces            396,00
                                                           366             42 surfaces            756,00
                                                           367             52 surfaces            936,00




                                                                                                           7
Description                                          Picture   Groupnr.              Range           Price in Euro

l engT h ( conTinued )

Glass scale (projector scale)                                   430          (0-50) mm, pitch 5 mm       220,00
                                                                431          (0-80) mm, pitch 5 mm       340,00
Best measurement capability (k=2):                              432       (0-100) mm, pitch 10 mm        220,00
0,4 µm + 1,0 · 10-6 · l                                         433       (0-150) mm, pitch 10 mm        320,00
                                                                434       (0-200) mm, pitch 10 mm        420,00
                                                                435       (0-300) mm, pitch 10 mm        620,00
                                                                436       (0-400) mm, pitch 10 mm        820,00



Line standard (vision scale)
QI scales                                                       490        (0-105) mm, pitch 5 mm        440,00
                                                                491        (0-205) mm, pitch 5 mm        840,00

QV/QS scales                                                    492       (0-200) mm, pitch 10 mm        420,00
                                                                493       (0-250) mm, pitch 10 mm        520,00
                                                                494       (0-400) mm, pitch 10 mm        820,00

HQV scales (zeroglass)                                          492       (0-200) mm, pitch 10 mm        420,00
                                                                493       (0-250) mm, pitch 10 mm        520,00
Best measurement capability (k=2):                              494       (0-400) mm, pitch 10 mm        820,00
0,08 µm + 0,5 · 10-6 · l


Calibration plate (2D-Grid)                                     840            (200x200) mm,             840,00
                                                                                 pitch 10 mm
Best measurement capability (k=2):
Distance between 2 points: 0,8 µm + 0,5 · 10-6 · l
Linearity: 0,2 µm + 0,5 · 10-6 · l
Straightness: 0,2 µm
Squareness: 0,2"



Calibration chart (glass)                                       841                                      440,00

Best measurement capability (k=2):
0,24 µm




Motic Calibration Slide                                         842                                      100,00

Best measurement capability (k=2):
Diameter circle 10,0 µm




  8
Description                          Picture   Groupnr.            Range       Price in Euro

R oughneSS       S pecimen

Type A1
Like Mitutoyo step standards                    580             (0-20) µm d        180,00

2 step gauge


4 step gauge


Best measurement capability (k=2):
-d (0-20µm): 10 nm + 2%.d


Type A2
Like Halle standards                            580        (0-20) µm d or Pt       180,00

Depth-setting standards



Best measurement capability (k=2):
-d (0-20µm): 10 nm + 2%.d
-Pt (0-20µm): 10 nm + 2%.Pt

Type B and C
Like Mitutoyo roughness standards               580            (0-20) µm Ra        180,00
                                                          (0-80) µm Rt or Rz
Single sine wave                                           (10-250) µm RSm



Like Rubert standards
Sine of saw tooth wave standards


Best measurement capability (k=2):
-Ra (0-20µm): 3 nm + 3%.Ra
-Rz (0-80µm): 30 nm + 2%.Rz
-Rt (0-80µm): 40 nm + 3%.Rt
-RSm (10-250µm):    0.1%.RSm

Type B and C
Like Mitutoyo roughness standards               581            (0-20) µm Ra        270,00
                                                          (0-80) µm Rt or Rz
Dual sine wave                                             (10-250) µm RSm



Best measurement capability (k=2):
-Ra (0-20µm): 3 nm + 3%.Ra
-Rz (0-80µm): 30 nm + 2%.Rz
-Rt (0-80µm): 40 nm + 3%.Rt
-RSm (10-250µm):    0.1%.RSm




                                                                                            9
Description                                Picture   Groupnr.            Range       Price in Euro




Type D1
Like Halle standards                                  581            (0-20) µm Ra        180,00
-Roughness standards Fine, Middle, Gross                        (0-80) µm Rt or Rz     per piece




Best measurement capability (k=2):
-Ra (0-20µm): 3 nm + 3%.Ra
-Rz (0-80µm): 30 nm + 2%.Rz
-Rt (0-80µm): 40 nm + 3%.Rt


R oundneSS    ST andaRd S

Like Mitutoyo roundness standards                     550          (0-1) µm RONt         360,00



-RONt (0-1µm): 15 nm + 15%.RONt




  10
Description                          Picture   Groupnr.        Range      Price in Euro

d iST anceS

Laser measurement                                                         on request

Best measurement capability (k=2):
0,20 µm + 0,7 · 10-6 · l




l engTh    meaS uRing inSTR umenTS


Caliper                                         10         (0 - 100) mm        35,00
                                                10         (0 - 150) mm        35,00
Best measurement capability (k=2):              10         (0 - 200) mm        35,00
9,6 µm + 4,2 · 10-6 · l                         11         (0 - 300) mm        40,00
                                                11         (0 - 450) mm        40,00
                                                11         (0 - 600) mm        40,00
                                                12        (0 - 1000) mm        45,00
                                                12        (0 - 1500) mm        45,00


Plastic caliper                                 10         (0 - 150) mm        35,00

Best measurement capability (k=2):
100 µm




Carbon fiber caliper                            11         (0 - 300) mm        40,00
                                                11         (0 - 450) mm        40,00
Best measurement capability (k=2):              11         (0 - 600) mm        40,00
9,6 µm + 4,2 · 10-6 · l                         12        (0 - 1000) mm        45,00
                                                12        (0 - 1500) mm        45,00




                                                                                    11
Description                                      Picture                 Groupnr.          Range       Price in Euro

l engT h   meaSu Ring inSTRumenTS        (c on Tinued )

Build-in type caliper                                                     10           (0 - 100) mm         35,00
                                                                          10           (0 - 150) mm         35,00
Best measurement capability (k=2):                                        10           (0 - 200) mm         35,00
9,6 µm + 4,2 · 10-6 · l                                                   11           (0 - 300) mm         40,00
                                                                          11           (0 - 450) mm         40,00
                                                                          11           (0 - 600) mm         40,00
                                                                          12           (0 - 800) mm         45,00
                                                                          12          (0 - 1000) mm         45,00



Depth type caliper                                                        10           (0 - 150) mm         35,00
                                                                          10           (0 - 200) mm         35,00
Best measurement capability (k=2):                                        11           (0 - 300) mm         40,00
9,6 µm + 4,2 · 10-6 · l                                                   11           (0 - 450) mm         40,00
                                                                          11           (0 - 600) mm         40,00
                                                                          12           (0 - 750) mm         45,00
                                                                          12          (0 - 1000) mm         45,00


Tire thread depth gage                                                    10            (0 - 25) mm         35,00

Best measurement capability (k=2):
8 µm



Dial caliper gauge for outside measurements                               230           (0 - 10) mm         35,00
                                                                          231           (0 - 20) mm         40,00
Best measurement capability (k=2):                                        232           (0 - 50) mm         45,00
1,0 µm




Dial Caliper gauge for inside measurements                                230           (0 - 10) mm         35,00
                                                                          231           (0 - 20) mm         40,00
Best measurement capability (k=2):                                        232           (0 - 50) mm         45,00
3,1 µm




Outside micrometer with interchangeable anvils                            31             (0 - 50) mm        40,00
                                                                          32           (0 - 100) mm         40,00
Best measurement capability (k=2):                                        33           (0 - 150) mm         45,00
1,2 µm + 6,6 · 10-6 · l                                                   33         (100 - 200) mm         45,00
                                                                          34         (150 - 300) mm         50,00
                                                                          34         (200 - 300) mm         50,00
                                                                          35         (300 - 400) mm         55,00
                                                                          36         (400 - 500) mm         60,00
For calibration prices of the included micrometer standards see page 7    37         (500 - 600) mm         65,00
                                                                          38         (600 - 700) mm         70,00
                                                                          39         (700 - 800) mm         75,00
                                                                          40         (800 - 900) mm         80,00
                                                                          41        (900 - 1000) mm         85,00




  12
Description                                      Picture                 Groupnr.            Range           Price in Euro



                                                                          30             (0 - 25) mm              35,00
Outside micrometer
                                                                          31             (0 - 30) mm              40,00
                                                                          31            (25 - 50) mm              40,00
Best measurement capability (k=2):                                        32            (50 - 75) mm              40,00
1,2 µm + 6,6 · 10-6 · l                                                   32           (75 - 100) mm              40,00
                                                                          33          (100 - 125) mm              45,00
                                                                          33          (125 - 150) mm              45,00
                                                                          33          (150 - 175) mm              45,00
                                                                          33          (175 - 200) mm              45,00
For calibration prices of the included micrometer standards see page 7    34          (200 - 225) mm              50,00
                                                                          34          (225 - 250) mm              50,00
                                                                          34          (250 - 275) mm              50,00
                                                                          34          (275 - 300) mm              50,00
                                                                          35          (300 - 325) mm              55,00
                                                                          35          (325 - 350) mm              55,00
                                                                          35          (350 - 375) mm              55,00
                                                                          35          (375 - 400) mm              55,00
                                                                          36          (400 - 425) mm              60,00
                                                                          36          (425 - 450) mm              60,00
                                                                          36          (450 - 475) mm              60,00
                                                                          36          (475 - 500) mm              60,00
                                                                          37          (500 - 525) mm              65,00
                                                                          37          (525 - 550) mm              65,00
                                                                          37          (550 - 575) mm              65,00
                                                                          37          (575 - 600) mm              65,00



Outside micrometer (sets)                                                 50            (0 - 50) mm, 2 pcs        75,00
                                                                          51            (0 - 75) mm, 3 pcs       115,00
Best measurement capability (k=2):                                        52           (0 - 100) mm, 4 pcs       155,00
1,2 µm + 6,6 · 10-6 · l                                                   53           (0 - 150) mm, 6 pcs       245,00
                                                                          54        (150 - 300) mm, 6 pcs        290,00
                                                                          55          (0 - 300) mm, 12 pcs       535,00




For calibration prices of the included micrometer standards see page 7


Limit micrometer with double spindle                                      45              (0 - 25) mm             70,00
                                                                          46             (25 - 50) mm             80,00
Best measurement capability (k=2):
1,2 µm + 6,6 · 10-6 · l




Inside micrometer "Mini- Holtest"(2 points)                               100           (2 - 2,5) mm              35,00
                                                                          100           (2,5 - 3 ) mm             35,00
Best measurement capability (k=2):                                        100           (3 - 4 ) mm               35,00
1,8 µm                                                                    100           (4 - 5 ) mm               35,00
                                                                          100           (5 - 6 ) mm               35,00




                                                                                                                       13
Description                                          Picture                   Groupnr.            Range           Price in Euro

l engT h   meaSu Ring inSTRumenTS          (c on Tinued )

Inside micrometer "Mini- Holtest"(2 points) (sets)                              110            (2 - 3) mm, 2 pcs        70,00
                                                                                111            (3 - 6) mm, 3 pcs       105,00
Best measurement capability (k=2):
1,8 µm



For calibration prices of the included setting ring see page 20




Bore gage for extra small holes                                                 210         (0,95 - 1,55) mm            35,00
                                                                                210         (1,50 - 4,00) mm            35,00
Best measurement capability (k=2):                                              210         (3,70 - 7,30) mm            35,00
0,3 µm + 4,8 · 10-6 · l                                                         210        (7,00 - 10,00) mm            35,00
                                                                                210       (10,00 - 18,00) mm            35,00


The calibration prices only apply to the dial gauge




Inside micrometer (3 points)                                                    120               (6 - 8) mm            35,00
                                                                                120              (8 -10) mm             35,00
Best measurement capability (k=2):                                              120             (10 -12) mm             35,00
1,7 µm + 9,8 · 10-6 · d                                                         120            (12 - 16) mm             35,00
                                                                                120            (16 - 20) mm             35,00
                                                                                120            (20 - 25) mm             35,00
                                                                                121            (25 - 30) mm             40,00
                                                                                121            (30 - 40) mm             40,00
                                                                                121            (40 - 50) mm             40,00
                                                                                122            (50 - 63) mm             40,00
                                                                                122            (62 - 75) mm             40,00
                                                                                122            (75 - 88) mm             40,00
                                                                                122           (87 - 100) mm             40,00
                                                                                123          (100 - 125) mm             45,00




Inside micrometer (3 points) (sets)                                             130           (6 - 12) mm, 5 pcs       609,00
                                                                                131          (12 - 20) mm, 3 pcs       322,00
Best measurement capability (k=2):                                              132          (12 - 25) mm, 5 pcs       609,00
see inside micrometer (3 points);                                               133          (20 - 50) mm, 6 pcs       659,00
see setting ring on page 20                                                     134          (25 - 50) mm, 5 pcs       624,00
                                                                                135          (50 - 75) mm, 3 pcs       332,00
                                                                                136         (50 - 100) mm, 6 pcs       664,00
                                                                                137         (75 - 100) mm, 3 pcs       332,00




For other sets see calibration prices of inside micrometers and ring gauges.




  14
Description                                      Picture                 Groupnr.         Range       Price in Euro




Caliper type inside micrometer                                            31           (5 - 30) mm         35,00
                                                                          32          (25 - 50) mm         40,00
                                                                          32          (50 - 75) mm         40,00
Best measurement capability (k=2):                                        32         (75 - 100) mm         40,00
2,2 µm + 4,2 · 10-6 · d                                                   33        (100 - 125) mm         45,00




Tubular inside micrometer (2 points)                                      32           (50 - 75) mm        40,00
                                                                          32          (75 -100) mm         40,00
Best measurement capability (k=2):                                        33        (100 - 125) mm         45,00
2,8 µm + 7,2 · 10-6 · l




Micrometer head                                                           70         (0 - 1 ) mm           50,00
                                                                          70         (0 - 2,5) mm          50,00
Best measurement capability (k=2):                                        70         (0 - 5 ) mm           50,00
1,2 µm + 1,3 · 10-6 · l                                                   70         (0 - 6,5) mm          50,00
                                                                          70         (0 - 13 ) mm          50,00
                                                                          70         (0 - 15 ) mm          50,00
                                                                          70         (0 - 25 ) mm          50,00
                                                                          71         (0 - 50 ) mm          60,00



Micrometer with dial indicator                                            60           (0 - 25) mm         35,00
                                                                          61          (25 - 50) mm         40,00
Best measurement capability (k=2):                                        62          (50 - 75) mm         40,00
1,9 µm                                                                    63         (75 - 100) mm         40,00




Dial snap micrometer                                                      60           (0 - 25) mm         35,00
                                                                          61          (25 - 50) mm         40,00
Best measurement capability (k=2):                                        62          (50 - 75) mm         40,00
1,0 µm                                                                    63         (75 - 100) mm         40,00




Indicating micrometer                                                     60           (0 - 25) mm         35,00
                                                                          61          (25 - 50) mm         40,00
Best measurement capability (k=2):                                        62          (50 - 75) mm         40,00
0,9 µm                                                                    63         (75 - 100) mm         40,00



For calibration prices of the included micrometer standards see page 7




                                                                                                                15
Description                                Picture    Groupnr.       Range       Price in Euro

l engT h    meaSu Ring inSTRumenTS   (c on Tinued )

Linear gauge                                           210          (0 - 5) mm        35,00
                                                       210         (0 -10) mm         35,00
Best measurement capability (k=2):                     211        (0 - 25) mm         40,00
0,3 µm + 4,8 · 10-6 · l                                211        (0 - 30) mm         40,00
                                                       212        (0 - 50) mm         45,00
                                                       212       (0 - 100) mm         45,00


Dial indicator                                         210       (0 - 0,08) mm        35,00
                                                       210       (0 - 0,1 ) mm        35,00
Best measurement capability (k=2):                     210       (0 - 0,5 ) mm        35,00
0,3 µm + 4,8 · 10-6 · l                                210       (0 - 0,8 ) mm        35,00
                                                       210       (0 - 1 ) mm          35,00
                                                       210       (0 - 2 ) mm          35,00
                                                       210       (0 - 2,5) mm         35,00
                                                       210       (0 - 3,5) mm         35,00
                                                       210       (0 - 4 ) mm          35,00
                                                       210       (0 - 5 ) mm          35,00
                                                       210       (0 - 10 ) mm         35,00
                                                       211       (0 - 12 ) mm         40,00
                                                       211       (0 - 12,7) mm        40,00
                                                       211       (0 - 20 ) mm         40,00
                                                       211       (0 - 25 ) mm         40,00
                                                       211       (0 - 30 ) mm         40,00
                                                       212       (0 - 50 ) mm         45,00
                                                       212       (0 - 60 ) mm         45,00
                                                       212       (0 - 80 ) mm         45,00
                                                       212       (0 - 100 ) mm        45,00


Test indicator                                         185          all ranges        35,00

Best measurement capability (k=2):
0,6 µm




Thickness gauge                                        220        (0 - 1) mm          35,00
                                                       220        (0 - 10) mm         35,00
Best measurement capability (k=2):                     221        (0 - 12) mm         35,00
0,9 µm                                                 222        (0 - 20) mm         40,00
                                                       223        (0 - 25) mm         40,00




i-Checker                                              200       (0 - 100) mm        450,00

Best measurement capability (k=2):
0,06 µm + 0,8 · 10-6 · l




  16
Description                                       Picture   Groupnr.       Range       Price in Euro




Indicator Tester 170-102                                     201         (0 - 25) mm       180,00

Best measurement capability (k=2):
0,4 µm




Indicator Tester 521-105 and 521-103                         202          (0 - 5) mm       225,00
                                                             203          (0 - 1) mm       225,00
Best measurement capability (k=2):
0,3 µm




Height gauge                                                 20         (0 - 200) mm        60,00
                                                             20         (0 - 300) mm        60,00
Best measurement capability (k=2):                           21         (0 - 600) mm        70,00
9,8 µm + 1,8 · 10-6 · l                                      22        (0 - 1000) mm        80,00




Low-force height gauge                                       710         (0 - 50) mm       180,00*

VL-50 / VL-50A / Elecont-type

Best measurement capability (k=2):
0,9 µm


* For calibration on site prices are on request



Linear height and QM-height                                  390       (0 - 1000) mm       270,00*

Best measurement capability (k=2):
1,2 µm + 2,9 · 10-6 · l



* For calibration on site prices are on request




                                                                                                 17
Description                                    Picture    Groupnr.      Range   Price in Euro

l engT h   meaSu Ring inSTRumenTS        ( con Tinued )

Profile projector                                          420                  on request

Best measurement capability (k=2):
1,5 µm + 2,4 · 10-6 · l




Toolmaker Microscope, TM-500                               440                  on request

Best measurement capability (k=2):
2,0 µm + 3,2 · 10-6 · l




Measurement microscope                                     440                  on request

Best measurement capability (k=2):
0,9 µm + 3,6 · 10-6 · l




Quick Vision                                               450       Hyper QV   on request
                                                           460             QV
Best measurement capability (k=2):
x- and y-axis: 0,2 µm + 0,4 · 10-6 · l
z-axis: 0,4 µm + 2,8 · 10-6 · l




Quick Scope                                                470                  on request

Best measurement capability (k=2):
0,7 µm + 7,5 · 10-6 · l




Quick Image                                                480                  on request

Best measurement capability (k=2):
0,7 µm + 7,5 · 10-6 · l




  18
Description               Picture   Groupnr.   Range   Price in Euro

R oughneSS    Te ST eRS


Roughness tester                     560               on request
                                     561
                                     570
                                     571




R oundneSS    T eSTeRS

Roundness tester                     530               on request
                                     540
                                     541




                                                                 19
Description                          Picture   Groupnr.     Range       Price in Euro

d iame Te R

Setting ring (ring gauge)                       520       (4 - 50) mm       252,00

Best measurement capability (k=2):

Diameter: 0,2 µm
Roundness: 0,10 µm + 10% ·RONt




Master ball                                     510       (0 - 30) mm       252,00

Best measurement capability (k=2):

Diameter: 0,2 µm
Roundness: 0,10 µm + 10% ·RONt




  20
Description                                   Picture   Groupnr.          Range       Price in Euro

f oRm

Straight edge                                            370          (0 - 300) mm        120,00
                                                         371          (0 - 500) mm        135,00
Best measurement capability (k=2):                       372          (0 - 750) mm        150,00
1,5 µm                                                   373         (0 - 1000) mm        165,00
                                                         375          (0 - 280) mm        270,00




Knife edge straight edge                                 370          (0 - 300) mm        120,00
                                                         371          (0 - 500) mm        135,00
Best measurement capability (k=2):                       372          (0 - 750) mm        150,00
1,5 µm                                                   373         (0 - 1000) mm        165,00




Surface plate                                            400       (1000 x 1000) mm    on request
                                                         401       (2000 x 2000) mm
Best measurement capability (k=2):                       402       (3000 x 3000) mm
0,2 µm + 0,7 · 10-6 · l




Maximum range for calibration: (3000 x 3000) mm




c ooR dinaTe    mea SuRing machine S

CMM + probe system
                                                         500                          on request
                                                         501
Best measurement capability (k=2):                       502
CMM: 0,1 µm + 0,4 · 10-6 ·l                              503
Probe: 0,1 µm




                                                                                                21
Description                                      Picture   Groupnr.      Range          Price in Euro

a ngle

Precision square                                            380        (200 x 300) mm       155,00
                                                            381        (300 x 500) mm       170,00
                                                            382        (400 x 750) mm       185,00
                                                            383       (600 x 1000) mm       200,00



Best measurement capability (k=2):
Angle deviation: 2,4 µm/(length shortest leg)
Straightness: 1,5 µm

Maximum range for calibration: (600 x 1000) mm




Quadra square master                                        384        (200 x 300) mm       300,00
                                                            384        (300 x 500) mm       300,00
                                                            384        (400 x 750) mm       300,00
                                                            384       (600 x 1000) mm       300,00
Best measurement capability (k=2):
Angle deviation: 2,4 µm/(length shortest leg)
Straightness: 1,5 µm

Maximum range for calibration: (600 x 1000) mm


Spirit level                                                700        ±0,1 mm/m            270,00

Best measurement capability (k=2):
0,01 mm/m (≈2")




Electronic level                                            810       ±2000 µm/m            270,00

Best measurement capability (k=2):
1 µm/m (≈0,2“)




  22
                                   www.mitutoyo.eu




c alib RaTion pRocedu Re
For customers outside the BeNeLux, please contact your local Mitutoyo representative (they will contact Mitutoyo
Nederland).

1. BeNeLux customers and Mitutoyo affiliates plan calibration order with department Sales Inside (Tel: 0031-
   (0)318-534911 or kalibratie@mitutoyo.nl);
2. Send object(s) to be calibrated to Mitutoyo Nederland (Landjuweel 35, 3905 PE Veenendaal, The Netherlands);
3. The object(s) are cleaned and inspected visually;
4. Adjustment of measuring instruments is only done in agreement with the customer;
5. Calibration towards international standards, manufacturing guidelines or custom specific;
6. Assessment of the calibration results, compared to manufacturing specifications, on request;
7. Results reported in a Dutch or English calibration certificate;
8. RvA-sticker with calibration date and recalibration date (recalibration date to be filled in by the customer);
9. Packing and transport to the customer (transport from Mitutoyo to the customer is insured, transport costs are
   for account of the customer).




                                                                                                                    23
                                                                               Coordinate Measuring Machines
                                                                               Vision Measuring Systems

                                                                               Surface-, Form- and Contour
                                                                               Measurement
                                                                               Optical Measuring
                                                                               Sensor Systems
                                                                               Hardness Measuring
                                                                               Digital Scale and DRO Systems

                                                                               Small Tool Instruments and
                                                                               Data Management
                                                                               Mitutoyo Service Departments



                                                                                  Mitutoyo Nederland b.v.
                                                                                                               2010V.04




                                                                                  Landjuweel 35
                                                                                  3905 PE Veenendaal
                                                                                  The Netherlands
p lea Se noT e :
                                                                                  T + 31 318 534911
•	 All earlier price lists are out of date.
                                                                                  F + 31 318 534914
•	 All prices are subject to VAT.
                                                                                  E kalibratie@mitutoyo.nl
•	 Mitutoyo Nederland b.v. reserves the right to make price changes.
                                                                                  U www.mitutoyo.nl
•	 RvA calibrations can be performed for all makes of measuring instruments.
•	 Calibrations according to Mitutoyo's Terms of Delivery.

								
To top