Docstoc

MEASURING MARKING

Document Sample
MEASURING MARKING Powered By Docstoc
					               MEASURING - MARKING




                                                        CONTENTS
    RULES
                      ADJUSTABLE SQUARE                   69
                      ANGLE PLATES                        67
DAVID USE PHOTO
                      ANGLE MEASURER                  60/62
    SD0010            AUTO CENTRE PUNCHES                 71
                      BEVELLED STRAIGHT EDGE              62
                      BORE GAUGES                         65
                      CALIPER GAUGES                 63 - 64
                      CALIPERS & DIVIDERS                 68
                      CENTRE PUNCHES                 70 - 71
CALIPER GAUGES        CENTRE SQUARES                      69
                      DEPTH GAUGES                        62
                      DIAL GAUGES                         66
                      DRIVE PIN PUNCHES              71 - 72
                      ELECTRONIC CALIPER GAUGES           64
                      ENGINEERS BLUE                      71
                      ENGINEERS MARKING GAUGE             69
                      ENGINEERS MINI LEVELS               67
                      ENGINEERS SQUARES              68 - 69
                      FEELER GAUGES                       63
 MICROMETERS          FLAT SQUARES                   68 - 69
                      LETTER & NUMBER STAMPS         72 - 73
DAVID USE PHOTO       MAGNETIC BASES & DIAL GAUGES        66
                      MEASURING WHEELS                    74
    SD0010
                      MEASURING SETS                      65
                      MICROMETERS                         65
                      ODDLEG CALIPERS                     68
                      OPTICAL CENTRE PUNCH                71
                      POCKET SPRING BALANCES         73 - 74
                      PROTRACTORS                         62
   SCRIBES
                      RADIUS GAUGE                        62
                      RULER STOP                          61
DAVID USE PHOTO       RULES                          60 - 61
    SD0010            SCALE RULES                         61
                      SCRIBES                        69 - 70
                      SLATERS TRACK GAUGES                73
                      SURFACE GAUGES                      67
                      SURFACE PLATES                      67
                      TELESCOPIC GAUGE SET                65
CENTRE PUNCHES        TOOL MAKERS CLAMPS                  73
                      TRANSFER PUNCHES                    71
                      UNIVERSAL BEVEL PROTRACTOR          66
DAVID USE PHOTO
                      V-BLOCK & CLAMP                     73
    SD0010            VERNIER GAUGES                      63
                      WATERLINE MARKER                    67
                      WIGGLER & CENTRE FINDER SET         67
                      WIRE GAUGE                          73




                                                               59
                               SQUIRES MODEL & CRAFT TOOLS
                                  RULES                                              STAINLESS STEEL CENTRE RULES a high quality centring rule
                                                                                     with permanently etched imperial graduations. The rules are
STAINLESS STEEL RULES a range of high quality stainless steel                        marked on one face only with scales of 6" - 0 - 6"/12" - 0 - 12"
rules. Easy to read permanently etched graduations showing                           graduated in 32nds on one edge, 0 - 12"/0 - 24" graduated in
metric graduations of ½mm, mm, cm and imperial graduations of                        16ths on the other. Useful when marking out and can also be
1/16, 1/32 and 1/64". Metric/Imperial conversion tables are etched                   used as a right/left hand reading rule. Available in 12" and 24".
on the reverse side. Lengths 6", 12", 24" and 39".



                                                                                     CODE       TYPE                                                                PRICE
                                                                                     RLCF12     Centre Rule 12".................................................... £5.99
CODE       TYPE                                                            PRICE     RLCF24     Centre Rule 24".................................................... £11.99
040-551    L/C Stainless Steel Rule 6"..................................    £1.50
040-552    L/C Stainless Steel Rule 12"................................     £2.99    WIDE PATTERN ALUMINIUM RULE a useful lightweight alumini-
040-553    L/C Stainless Steel Rule 24"................................     £5.99    um rule for use in the workshop, home or drawing office. The rule
040-554    L/C Stainless Steel Rule 39"................................    £10.99    is graduated in centimetres and millimetres on one edge and inch-
                                                                                     es and sixteenths on the other. Length 600mm long, 50 mm wide
FISHER STAINLESS STEEL RULES manufactured from high                                  and has a hanging hole at one end.
quality stainless steel. Permanently etched graduations show met-
ric graduations of ½mm, mm, cm and imperial graduations of 1/16,
1/32 and 1/64". Lengths 6", 12", 24" and 39".

                                                                                     CODE       TYPE                                                 PRICE
                                                                                     040-113    Wide Pattern Aluminium Rule 60cm..................... £4.99
CODE       TYPE                                                        PRICE
RLSS06     Fisher Stainless Steel Rule 6".............................. £2.50
                                                                                     FISHER FOLDING RULES a folding rule with permanently etched
RLSS12     Fisher Stainless Steel Rule 12"............................ £3.99
                                                                                     markings. The rule folds in half pivoting on a strong rivet. The rule
RLSS24     Fisher Stainless Steel Rule 24"............................ £7.99
                                                                                     has pressed indentations, these serve to hold the rule straight
RLSS39     Fisher Stainless Steel Rule 39"............................ £14.99
                                                                                     when extended. The rules have metric and imperial scales, gradu-
                                                                                     ated in mm and cm on one side, 1/16, 1/4, 1/2 and 1" on the
FISHER SATIN CHROME STAINLESS STEEL RULES manufac-
                                                                                     reverse side. Length overall 24", available in steel or stainless
tured in Japan from high quality hardened stainless steel. The
                                                                                     steel.
satin chrome finish is an ideal surface for printing fine graduations
which are easy to read with minimum light reflection. The ruler
shows metric graduations of ½mm, mm, cm and imperial gradua-
tions of 1/10, 1/16, 1/20, 1/32, 1/50 and 1/64". 6", 12" and 24".
                                                                                     CODE       TYPE                                                  PRICE
                                                                                     040-126    Fisher Stainless Steel Folding Rule 24"............... £7.99

                                                                                     MARK RULER a special folding ruler which is useful in many fields
                                                                                     of work. It will replace protractors, squares and angle finders in
CODE       TYPE                                                       PRICE          many applications and can also be used as a normal ruler.
RLFC06     Fisher Satin Chrome Rule 6"................................ £3.99         Manufactured in tough clear plastic with easy to read markings,
RLFC12     Fisher Satin Chrome Rule 12".............................. £6.99          graduated in mm. The rule folds in half allowing angles of 0 - 180°,
RLFC24     Fisher Satin Chrome Rule 24".............................. £16.99         the pivot has been
                                                                                     designed to allow
ALUMINIUM RULES a range of anodised aluminium rules with                             so the rule will lay
easy to read markings on both sides. Metric showing graduations                      flat on the work.
of mm and cm, imperial graduations of 1/16, 1/4, 1/2 and 1".                         2 sizes available.
Available in 6" and 12" lengths. Made in England.
                                                                                     CODE       TYPE                                                             PRICE
                                                                                     RL4003     Mark Ruler 30cm.................................................. £2.99
                                                                                     RL1557     Mark Ruler 60cm.................................................. £5.99
CODE       TYPE                                                             PRICE
040-070    Aluminium Rule 6"................................................ £1.75   EASY ANGLE PROTRACTOR RULER a heavy duty foldable
040-072    Aluminium Rule 12".............................................. £2.99    steel protractor ruler with metric and imperial graduations. It is ,
                                                                                     adjustable through 360° and has an integrated angle finder for
FLEXIBLE STEEL RULES a range of flexible stainless steel rules                       easy angle measuring. It is fitted with a tightening screw to lock
which are useful for measuring curved surfaces. The rules have                       angle in place for repated measurements.
permanently etched marking showing metric graduations of mm
and cm, imperial graduations of 1/16, 1/32, 1/2 and 1".




CODE       TYPE                                                        PRICE
040-013    Flexible Stainless Steel Rule 6"............................ £2.50        CODE       TYPE                                                 PRICE
040-014    Flexible Stainless Steel Rule 12".......................... £4.50         040-421    Easy Angle Protractor Ruler 600mm.................... £4.99


60                                       SQ UIRE S T E L . 01243 842424 - FA X . 01842525
                             SQUIRES MODEL & CRAFT TOOLS
FOLDING RULES two types of these useful rules are available, a                     STAINLESS STEEL SCALE RULES a range of flat profile stain-
plastic type manufactured from tough impact resistant ABS plastic                  less steel scale rules covering a range of popular modelling scales.
with clear graduations of mm/cm on one side, imperial on the other                 All types have permanently etched markings on a satin finish. The
graduated in 1/8". The hardwood folding rule has black gradua-                     reverse side of all types has a range of conversion tables covering
tions and solid brass hinges and tips. Metric on one side showing                  inches to mm, metric tapping drill sizes, BA tapping and clearance
cm, mm. Imperial on the reverse showing inches and 1/8". Length                    sizes. All rules are 12".
overall 1M/39",
folding down
to 10½".
                                                                                   CODE       TYPE                                                 PRICE
                                                                                   040-102    S/Steel Scale Rule 2mm/Foot - N Gauge............. £3.99
                                                                                   040-103    S/Steel Scale Rule 3.5mm/Foot - HO Gauge....... £3.99
CODE      TYPE                                                           PRICE
                                                                                   040-104    S/Steel Scale Rule 4mm/Foot - OO Gauge.......... £3.99
12392     Plastic Folding Rule 39"....................................... £8.25
                                                                                   040-107    S/Steel Scale Rule 7mm/Foot - O Gauge............. £3.99
36522     Hardwood Folding Rule 39".................................. £9.99
                                                                                   040-112    S/Steel Scale Rule 1"/Foot - 1/12th Scale............ £3.99
                                                                                   040-128    S/Steel Scale Rule 1/2"/Foot - 1/24th Scale......... £3.99
POCKET RULE WITH CLIP a 150mm stainless steel rule with
                                                                                   040-135    S/Steel Scale Rule 1/35th - Military Modelling...... £3.99
metric and imperial graduations. Fitted a pocket clip/sliding depth
                                                                                   040-172    S/Steel Scale Rule 1/72nd - Military Modelling..... £3.99
gauge.
                                                                                   STAINLESS STEEL SCALE RULE a flat profile stainless steel
                                                                                   scale rule with 1/12th and 1/24th permanently etched markings.
CODE      TYPE                                           PRICE                     The 1/24th edge features a centre 0. Length 12".
040-611   S/L Pocket Rule with Pocket Clip/Depth Gauge... £1.99

RULE WITH DRILL GAUGE a 150mm stainless steel rule with
metric and imperial graduations. This rule also features a series of               CODE       TYPE                                                 PRICE
holes 1/16" - 1/4", ideal for identifying drill sizes etc.                         040-241    S/Steel Scale Rule 1/12th - 1/24th Scale............. £3.99

                                                                                   SCALE RULES a range high quality aluminium scale rules. The
                                                                                   section of the rule is triangular allowing six working edges for the
                                                                                   various scales. This arrangement allows a clear, uncluttered scale
                                                                                   to be read. 2 types are available:- Metric showing 1:100, 1:200,
                                                                                   1:300, 1:400, 1:500 and 1:600. The imperial scales read 1:12,
CODE      TYPE                                             PRICE
                                                                                   1:24, 1:35, 2mm =1 foot,
040-959   Stainless Steel Rule 150mm with Drill Gauge...... £1.99
                                                                                   4mm = 1 foot and 7mm = 1foot.
FLAT MARKING OUT RULER/SQUARE a one piece flat square
useful for measuring and marking out on flat material such as foam
board and polystyrene sheet. The square is steel with a black fin-                 CODE       TYPE                                                           PRICE
ish and has metric and imperial markings. Although not a preci-                    RL1001     Scale Rule Metric 15cm........................................ £5.50
sion tool, it is                                                                   RL1002     Scale Rule Metric 30cm........................................ £12.99
useful addition                                                                    RL1003     Scale Rule Imperial 15cm..................................... £5.99
to the modellers
work bench.                                                                        TRIANGULAR SCALE RULE METRIC a high quality aluminium
Dims:-                                                                             metric scale rule. The section of the rule is triangular allowing six
200 x 300mm.                                                                       working edges for the various scales. This arrangement allows a
                                                                                   clear, uncluttered scale to be
                                                                                   read. 1:20, 1:25, 1:50, 1:75,
                                                                                   1:100 and 1:125.
CODE      TYPE                                        PRICE                        Length 30cm.
040-894   L/C Flat Marking Out Ruler/Square 200x300mm. £4.50
                                                                                   CODE       TYPE                                                   PRICE
                           SCALE RULES                                             041-125    Triangular Scale Rule Metric 30cm...................... £2.99

PECO N SCALE RULE a handy stainless steel rule useful for all                                                     RULER STOP
British N Gauge modellers. It carries markings showing the correct
measurements up to 50ft for British N Scale (1:148), ideal for                     RULER STOP a handy tool machined from steel with a knurled
scratch building, kit building and for measuring scale distances on                brass nut. The Rule Stop will fit onto virtually any standard steel
the layout. The correct coupling height for PECO N gauge rolling                   rule between 8mm(5/16") and 32mm(1-1/4") wide. It clamps firmly
stock is also shown, along with a track centre guide for postioning                and square to the rule by virtue of an internal dovetail face and fine
multiple track                                                                     machining. It turns the
formations.                                                                        humble steel rule into a
                                                                                   depth gauge, a transfer
CODE      TYPE                                                            PRICE    gauge and small square.
040-002   Peco N Scale Rule............................................... £3.99

    WHEN PLACING AN ORDER                                                          CODE       TYPE                                                                   PRICE
PLEASE USE THE FULL ORDER CODE                                                     040-047    Ruler Stop............................................................. £4.99


                                E -m a il: sa les@squire s t ool s . c om - w w w. s q u i re s t ool s . c om                                                       61
                              SQUIRES MODEL & CRAFT TOOLS
                 BEVELLED STRAIGHT EDGE                                            DEPTH GAUGE PROTRACTOR a stainless steel protractor with a
                                                                                   depth gauge rule. The protractor plate is graduated 0-180° in
BEVELLED STRAIGHT EDGE a top quality steel workshop                                opposite directions, the 6" depth gauge rule can be locked in posi-
straight edge used for cutting thin material such as card and                      tion, and is graduated in metric and imperial. All graduations are
veneer and for checking the straightness of lengths of timber,                     permanently
machine tables, plane soles etc. It is 38mm wide and 5mm thick                     etched. Plate
and ground on all surfaces for accuracy. Length 450mm.                             dims:- 3½" x 2".



                                                                                   CODE   TYPE                                                         PRICE
CODE       TYPE                                                        PRICE
                                                                                   PRDG20 Depth Gauge Protractor....................................... £8.99
040-350    Bevelled Straight 450mm..................................... £9.99

                                                                                                            ANGLE MEASURER
                          DEPTH GAUGES
                                                                                   ANGLE MEASURER a simple device that gives a direct reading of
DEPTH GAUGE a 6"/150mm depth gauge with permanently
                                                                                   corner angles in the range 25° to 165° and it also gives an auto-
etched graduations on the rule. The metric and imperial scales are
                                                                                   matic readout of the half angle needed for cutting mitre joints. It is
on opposite sides, the rule is easily turned over in the depth stop
                                                                                   manufactured with anodised aluminium arms with clear angle
which can be
                                                                                   markings. Length overall 380mm.
locked in
position.


CODE       TYPE                                                       PRICE
DG0010     Depth Gauge 6"/150mm....................................... £4.99

VERNIER DEPTH GAUGE-METRIC for measuring the depth of
holes, slots and recesses. Manufactured from stainless steel with
permanently etched graduations on the rule. Calibrated 0-02mm
with 100mm wide                                                                    CODE       TYPE                                                       PRICE
base and locking                                                                   040-111    Angle Measurer 25° to 165°................................. £5.99
screw. Supplied
in a wooden                                                                                                  RADIUS GAUGES
storage case.
                                                                                   L/C METRIC RADIUS GAUGES a range of economically priced
                                                                                   radius gauges with folding leaves and accurately formed concave
CODE       TYPE                                                PRICE
                                                                                   and convex radii for fast, positive identification of various radii.
52413      Vernier Depth Gauge Metric 0 - 200mm............... £14.99
                                                                                   The blades are individually stamped.
-----
DIGITAL DEPTH GAUGE a digital depth gauge ideal for checking
tyres, brake shoes and hole depths. It has a 0.01mm resolution
and metric and imperial
modes. With a clear LCD
display and measuring
range of 0 - 25mm.                                                                 CODE       TYPE                                                      PRICE
Requires 1 x CR2032                                                                040-609    L/C Radius Gauge 1 - 7mm.................................. £5.99
battery (not supplied).                                                            040-569    L/C Radius Gauge 7.5 - 15mm............................. £8.99
                                                                                   040-610    L/C Radius Gauge 15.5 - 25mm........................... £9.99
CODE       TYPE                                                      PRICE
040-085    Digital Depth Gauge 0 - 25mm............................. £11.99
                                                                                   RADIUS GAUGE with folding leaves and accurately formed con-
                                                                                   cave and convex radii for fast, positive identification of various
                          PROTRACTORS                                              radii. The blades are individually stamped. Manufactured in .0 -
                                                                                   3mm in 0.25mm increments and 3.5 to 7mm in 0.50mm incre-
STAINLESS STEEL PROTRACTOR a stainless steel protractor                            ments. Made in Germany.
with permanently etched graduations on the plate and ruler. The
protractor plate is graduated 0-180° in opposite directions, the bot-
tom edge of the plate also has a metric scale. The rule is marked
0 - 100mm in mm graduations. The rule can be locked in position.
Plate dims:-                                                                       CODE       TYPE                                                                PRICE
90 x 50mm.                                                                         040-125    Radius Gauge....................................................... £12.99


                                                                                              WHEN PLACING AN ORDER
                                                                                                 PLEASE USE THE
CODE       TYPE                                                           PRICE
040-015    Stainless Steel Protractor..................................... £5.99
                                                                                                FULL ORDER CODE

62                                      SQ UIRE S T E L . 01243 842424 - FA X . 01842525
                                SQUIRES MODEL & CRAFT TOOLS
                          FEELER GAUGES                                                         CALIPER GAUGES

FEELER GAUGE SETS with 100mm long taper blades. Each                    MINIATURE BRASS CALIPERS pocket size vernier type calipers
blade is marked with its size and folds into a plated steel case with   with graduations in metric and imperial. 3 sizes are available, ideal
thumbscrew.                                                             for working in
Metric set contains:-                                                   confined spaces.
0.05, 0.10, 0.15, 0.20,
0.30, 0.40, 0.50, 0.60,
0.70 & 0.80mm.
                                                                        CODE       TYPE                                                          PRICE
Imperial set contains:-                                                 GAGP02     Mini Brass Caliper Gauge 2"................................    £3.50
0.0015, 0.002, 0.003,                                                   GAGP03     Mini Brass Caliper Gauge 3"................................    £3.99
0.004, 0.006, 0.008,                                                    GAGP04     Mini Brass Caliper Gauge 4"................................    £4.99
0.010, 0.012, 0.015
& 0.025".                                                               DRAPER PLASTIC CALIPER GAUGE for internal, external and
                                                                        depth measurements. Metric and imperial graduations, reading
                                                                        150mm/6" with a vernier scale of 1/128" x 0.05mm.
CODE        TYPE                                          PRICE
73988       Feeler Gauge Set Met 10 Blades 0.05 - 0.80mm. £2.75
73970       Feeler Gauge Set Imp 10 Blades 0.0015 - 0.025" £2.75

FEELER GAUGE SETS expert quality, 100mm long taper blades,
hardened and polished for long accurate life. Each blade is
marked with its size and folds into a polished steel case with
thumbscrew.                                                             CODE   TYPE                                                       PRICE
Metric set contains:-                                                   GAP010 Draper Plastic Caliper Gauge............................... £2.75
0.05, 0.10, 0.15, 0.20, 0.25,
0.30, 0.35, 0.40, 0.45, 0.50,                                           DRAPER CALIPER GAUGES general purpose steel caliper
0.55, 0.60, 0.65, 0.70, 075,                                            gauges for internal, external and depth measurements with a
0.80, 0.90, 0.95 & 1.0mm.                                               thumb wheel for fine adjustment. Metric and imperial graduation
Imperial set contains:-                                                 reading 110mm/4½" and 150mm/6". Both sizes have a vernier
0.0015, 0.002, 0.0025, 0.003,
                                                                        scale of 1/128" x 0.05mm. Made in Germany.
0.004, 0.005, 0.006, 0.007,
0.008, 0.009, 0.010, 0.011,
0.012, 0.013, 0.014, 0.015,
0.016, 0.017, 0.018, 0.019,
0.020, 0.021, 0.022, 0.023,
0.024 & 0.025".

                                                                        CODE   TYPE                                                         PRICE
CODE        TYPE                                          PRICE
                                                                        GAGP05 Draper Caliper Gauge 5"...................................... £4.75
73996       Feeler Gauge Set Met 20 Blades 0.05-1.0mm..... £6.49
                                                                        GAGP06 Draper Caliper Gauge 6"...................................... £5.50
10286       Feeler Gauge Set Imp 26 Blades 0.0015-0.025... £9.99
                                                                        MINIATURE METRIC VERNIER GAUGE a miniature vernier
COMBINATION FEELER GAUGE an expert quality, one piece
                                                                        gauge ideal for working on small components or in restricted
combination gauge with 32 dual marked blades 95mm long, hard-
                                                                        spaces. Internal, external, depth and step measurements, manu-
ened for long accurate life. Each blade is marked with its size and
                                                                        factured from high quality stainless steel with etched graduations
folds into a polished steel case with thumbscrew. Metric 0.03 -
                                                                        reading 0 - 70mm with a vernier scale of 0.05mm (1/20mm). Matt
1.0mm. Imperial 0.001 - 0.040".
                                                                        chrome plated beam. Supplied in a storage wallet.
Metric:-0.03, 0.04, 0.05, 0.06,
0.07, 0.08, 0.09, 0.10, 0.13,
0.15, 0.18, 0.20, 0.23, 0.25,
0.28, 0.30, 0.33, 0.35, 0.40,
0.45, 0.50, 0.55, 0.60, 0.63,
0.65, 0.70, 075, 0.80, 0.85,
0.90 & 1.0mm.
Imperial:-0.001, 0.0015, 0.002,                                         CODE   TYPE                                                     PRICE
0.0025, 0.0028, 0.003, 0.0035,                                          GAMV22 Mini Vernier Gauge Metric 0 - 7cm....................... £13.99
0.004, 0.005, 0.006, 0.007, 0.008,
0.009, 0.010, 0.011, 0.012, 0.013,                                      DRAPER EXPERT QUALITY VERNIER GAUGE with fine adjust-
0.014, 0.015, 0.016, 0.018, 0.020,                                      ment screw for internal, external, depth and step measurements.
0.022, 0.024, 0.025, 0.026, 0.028,                                      Manufactured from high quality stainless steel with permanently
0.030, 0.032, 0.034, 0.035                                              etched graduations reading 0-140mm/0-5-1/2" with a vernier scale
& 0.040".
                                                                        of 0.001" (1/1000") and 0.02mm (1/50mm). Matt chrome plated
                                                                        beam and fine adjustment screw. Supplied in a storage case.
CODE        TYPE                                          PRICE
19613       Dual Reading Combi Feeler Gauge 32 Blades.... £16.99


       IF THERE ARE OTHER PRODUCTS
     THAT YOU WOULD LIKE US TO STOCK,
                                                                        CODE   TYPE                                                PRICE
     PLEASE FEEL FREE TO LET US KNOW.
                                                                        GAFA40 Expert Quality Vernier Gauge with Fine Adj......... £28.99


                                E -m a il: sa les@squire s t ool s . c om - w w w. s q u i re s t ool s . c om                                     63
                           SQUIRES MODEL & CRAFT TOOLS
STAINLESS STEEL DIAL CALIPER GAUGES easy to use caliper                     MOORE & WRIGHT DIGITAL CALIPER this high quality caliper is
gauges for internal, external, depth and step measurement. 2                manufactured from glass reinforced nylon which is highly durable.
types are available, a mini caliper ideal for small small components        Ideal for accurate and reliable measurements, ease of use and
or in restricted spaces, measuring range 0-100mm with a clear               speed of operation in both metric and imperial. Measures internal,
read-off to 0.02mm. The imperial model has a range 0-6" with a              external, depth and step with instant metric/imperial conversion
read-off to 0.001". Thumb wheel for fine adjustment, zero adjust-           and zero may be set in any position. Powered by a button cell.
ment. Supplied in a robust case.                                            Capacity
                                                                            0-6"
                                                                            0-150mm
                                                                            Resolution
                                                                            0.01"
                                                                            0.1mm

CODE   TYPE                                                 PRICE           CODE   TYPE                                              PRICE
GADG23 Mini S/S Dial Caliper Gauge Metric 0 - 100mm.... £19.99              GA015D M & Wright Digital Plastic Caliper 0-6"/150mm.... £49.99
GADG27 Stainless Steel Dial Caliper Gauge Imperial......... £22.99
                                                                            MOORE & WRIGHT DIGITAL CALIPER this high quality caliper is
                                                                            manufactured to exacting standards for accurate and reliable mea-
             ELECTRONIC CALIPER GAUGES                                      surements, ease of use and speed of operation in both metric and
                                                                            imperial. Measures internal, external, depth and step with instant
MC DIGITAL CALIPER a high quality caliper manufactured from                 metric/imperial conversion and zero may be set in any position.
glass reinforced nylon. Ideal for accurate and reliable measure-            The unit is powered by a single button cell. *Note - Subject to
ments, ease of use and speed of operation in both metric and                Design Change.*
imperial. Measures internal, external, and step with instant
metric/imperial conversion and zero may be set in any position.             Capacity
The unit is powered by a single button cell. Capacity 0-4"/0-100mm          0-6"
Resolution                                                                  0-150mm
0.01"                                                                       Resolution
0.1mm                                                                       0.0005"
                                                                            0.01mm
                                                                            CODE         TYPE                                                  PRICE
                                                                            040-915      M & Wright Digital Caliper 0-6"/150mm................ £92.99
CODE      TYPE                                                     PRICE
040-800   MC Plastic Caliper 0-4"/100mm........................... £12.99   SOLAR POWERED DIGITAL CALIPER a high quality dual pow-
                                                                            ered caliper manufactured from Carbon Fibre composite. Ideal for
ELECTRONIC CALIPER GAUGES high quality stainless steel dig-                 accurate and reliable measurements, ease of use and speed of
ital caliper gauges for internal, external, depth and step measure-         operation in both metric and imperial. Measures internal, external,
ments. The LCD display allows quick and easy readings, instant              depth and step with instant metric/imperial conversion and zero
mm/in conversion and zero may be set in any position. Powered               may be set in any position. The unit is powered by a single coin
by a single button cell. 3 sizes are available.                             cell (CR2016). Capacity 0-6"/0-150mm, Resolution 0.01"/0.1mm
Capacity
0-4"/0-100mm
0-6"/0-150mm
0-12"/0-300mm
Resolution
0.0005"
0.01mm

CODE      TYPE                                                 PRICE        CODE         TYPE                                           PRICE
040-029   Electronic Caliper Gauge 0 - 4"/100mm............... £19.99       040-945      Carbon Comp Solar Digital Caliper 0-6"/150mm.. £17.99
GAEC76    Electronic Caliper Gauge 0 - 6"/150mm............... £19.99
040-034   Electronic Caliper Gauge 0 - 12"/300mm............. £44.99        SOLAR POWERED DIGITAL CALIPER a high quality dual pow-
                                                                            ered caliper manufactured from stainless steel. Ideal for accurate
PROFESSIONAL DIGITAL VERNIER CALLIPER professional                          and reliable measurements, ease of use and speed of operation in
digital calipers with four function measurement, internal, external,        both metric and imperial. Measures internal, external, depth and
depth and step. It has thumb lock adjustment, zero-setting at any           step with instant metric/imperial conversion and zero may be set in
position and a 13mm x 38mm large display screen with metric and             any position. The unit is powered by a single coin cell (CR2016).
imperial measurement. Manufactured from hardened stainless                  Capacity 0-6"/0-150mm, Resolution 0.01"/0.1mm
steel. Supplied with SR44 battery and carry/storage case.
Capacity
0-6"
0-150mm




CODE      TYPE                                               PRICE          CODE         TYPE                                             PRICE
041-244   S/L Professional Digital Caliper 0 - 6"/150mm..... £19.99         040-949      Stainless Steel Solar Digital Caliper 0-6"/150mm £39.99


64                                   SQ UIRE S T E L . 01243 842424 - FA X . 01842525
                              SQUIRES MODEL & CRAFT TOOLS
                           MICROMETERS                                                                    MEASURING SETS

METRIC MICROMETERS standard quality outside micrometers,                          6 PIECE MEASURING SET a useful selection of measuring tools
with error adjustment screw. 2 types are available, metric reading                which are commonly used in almost any project. The set con-
0-25mm graduated to 1/50mm (0.01mm) and imperial reading 0-                       tains:-6" spring dividers, 6" outside calipers, 6" inside calipers,
1" graduated 0.001".                                                              depth gauge, pocket ruler and a vernier caliper gauge.




CODE       TYPE                                                          PRICE
GA0060     Metric Micrometer 0-25mm................................... £5.99
040-061    Imperial Micrometer 0-1"...................................... £5.99

HIGH QUALITY METRIC MICROMETER 0-25MM a high quality
metric micrometer with an enamelled bow frame which is cut away
at the anvil end to facilitate measurements in narrow slots. It has
                                                                                  CODE      TYPE                                                           PRICE
tungsten carbide measuring surfaces, pearl chrome plate thimble
                                                                                  59110     6 Piece Measuring Set......................................... £19.99
and sleeve with ratchet and locking lever. It is fitted with heat
resistant pads. Measuring range 0-25mm graduated to 0.01mm.
Supplied in a storage box with adjustment tool.                                                             BORE GAUGES

                                                                                  L/C BORE GAUGES a range of economically priced bore gauges
                                                                                  manufactured from stainless steel with permanently etched metric
                                                                                  graduations. The taper is accurate throughout the length of the
                                                                                  gauge making it a convenient tool for measuring diameters of
                                                                                  small holes and slots etc.
CODE       TYPE                                                PRICE
GA0066     High Quality Metric Micrometer 0-25mm.............. £14.99

MOORE & WRIGHT EXTERNAL MICROMETERS 0-1" & 0-25mm                                 CODE      TYPE                                                         PRICE
the 965 series micrometers have a dark blue enamelled recessed                    040-822   L/C Bore Gauge 1 - 15mm...................................    £3.49
bow frame cut away at the anvil end to facilitate usage in narrow                 040-202   L/C Bore Gauge 15 - 30mm.................................     £6.49
slots. Pearl chrome plate thimble and sleeve with ratchet and lock-               040-712   L/C Bore Gauge 30 - 45mm.................................     £7.99
ing lever. The 1965 and 1965M are similar to 965 and 965M
except that they have tungsten carbide tips. Each is supplied in a                BORE GAUGE METRIC manufactured from stainless steel with
plastic storage case with adjustment wrench.                                      permanently etched metric graduations. The taper is accurate
                                                                                  throughout the length of the gauge making it a convenient tool for
                                                                                  measuring diameters of small holes and slots etc. Range 1 -
                                                                                  15mm.


                                                                                  CODE      TYPE                                                 PRICE
                                                                                  040-201   Groz Bore Gauge Metric 1 - 15mm...................... £6.99
Code       965      965M          1965           1965M
Cap.       0-1"     0-25mm        0-1"           0-25mm                                             TELESCOPIC GAUGE SET
Grad.      0.001"   0.01mm        0.001"         0.01mm
CODE       TYPE                                                          PRICE    TELESCOPIC GAUGE SET used for the accurate measuring of
965        M & Wright Micrometer 0-1".................................   £39.99   bore diameters and groove widths. The spring-loaded plunger
965M       M & Wright Micrometer 0-25mm..........................        £39.99   expands within the groove and is then locked in position. The bore
1965       M & Wright Micrometer 0-1".................................   £39.99   gauge is then removed and the size can then be measured with a
1965M      M & Wright Micrometer 0-25mm..........................        £39.99   micrometer or caliper gauge. Satin chrome finish and supplied in a
                                                                                  PVC wallet. The set of 6 gauges cover the size range from 8mm
                                                                                  (5/16") to
           OUR SHOP IS NOW OPEN                                                   150mm (6").
            AT 100 LONDON ROAD
               BOGNOR REGIS
          MONDAY - FRIDAY 9.00 - 5.30
            SATURDAY 9.00 - 5.30
                                                                                  CODE      TYPE                                                           PRICE
        FREE PARKING FOR 2 HOURS                                                  52416     Telescopic Gauge Set.......................................... £24.99


                                E -m a il: sa les@squire s t ool s . c om - w w w. s q u i re s t ool s . c om                                              65
                            SQUIRES MODEL & CRAFT TOOLS
            UNIVERSAL BEVEL PROTRACTOR                                         METRIC DIAL INDICATOR 41mm an expert quality metric dial
                                                                               indicator reading 0 -
UNIVERSAL BEVEL PROTRACTOR SET used for the accurate                           100 in metric
measuring of angles, setting up jigs, laying out, and can be used              graduations of 0.01mm
for assembling and machining. It is fully calibrated through 360°              with a range of 5mm.
and has a magnifying glass for clear reading. It is supplied with a            The bezel diameter
300mm plain rule and acute angle attachment. Supplied in a plas-               is 41mm.
tic case for safe storage.


                                                                               CODE       TYPE                                                    PRICE
                                                                               51855      Metric Dial Indicator 0.01mm/5mm....................... £29.99
                                                                               -----
                                                                               DIAL INDICATORS 55mm expert quality dial indicators reading 0
                                                                               - 100 in metric or imperial graduations. The bezel diameter is
                                                                               55mm. The metric
CODE      TYPE                                                        PRICE    version is graduated
52430     Universal Bevel Protractor Set............................. £64.99   0.01mm, range 10mm.
                                                                               The imperial version
                                                                               is 0.0005", range 1".
           MAGNETIC BASES & DIAL GAUGES

MINIATURE MAGNETIC BASE miniature magnetic base with fine
adjustment for use with dial test indicators.                                  CODE       TYPE                                                             PRICE
The powerful magnet in the base which is                                       51830      Dial Indicator 0.01mm/10mm................................ £22.99
always engaged. The base has a precision                                       51831      Dial Indicator 0.0005"/1"....................................... £25.99
ground surface and a keeper plate is supplied
which should be replaced after use.                                            DUAL READING DIAL INDICATOR GAUGE an Expert Quality
                                                                               dual reading dial gauge, reading 0 - 100 in metric and imperial
Overall height - 138mm.                                                        graduations. Graduations
Shaft height - 100mm.                                                          0 - 25mm x 0.01mm &
Base diameter - 28mm.                                                          0 - 1" x 0.001". The bezel
                                                                               diameter is 55mm with an
                                                                               8mm stem. It is fitted with
CODE      TYPE                                               PRICE             a lug on the back
GA0125    Mini Magnetic Base with Fine Adjustment............ £9.99            of the case.

STANDARD MAGNETIC BASES high quality magnetic bases for                        CODE       TYPE                                                    PRICE
use with dial test indicators available with or without fine adjust-           65781      Dial Indicator Gauge Metric & Imperial................. £46.99
ment. Both feature a strong magnet which is operated by an
On/Off switch. Precision ground surface. Base dimensions 50 x                  METRIC DIAL INDICATOR an expert quality metric dial indicator
55 x 60mm. Main shaft 180 x 12mm. Height overall 240mm.                        reading 0 - 40 - 0 in graduations of 0.01mm. The bezel diameter is
**Product subject                                                              31mm. It is fitted with two mounting lugs.
to minor design
change**.




                                                                               CODE       TYPE                                                                PRICE
                                                                               040-022    Metric Dial Indicator.............................................. £24.99

                                                                               DIGITAL DIAL GAUGE an electronic dial gauge offers clear read-
                                                                               ings. It shows metric readings to 2 decimal places and 3 decimal
                                                                               places for imperial reading. The dial gauge can be switched
                                                                               instantly between metric and imperial reading, the gauge can also
                                                                               be set to zero at any point allowing plus or minus readings.
                                                                               Maximum and minimum deflections can be read from a mean posi-
                                                                               tion. The case of the
CODE      TYPE                                                    PRICE        instrument is plastic,
GA0129    Magnetic Base with On/Off Switch....................... £24.99
                                                                               suitable for general
GA0132    Magnetic Base with Fine Adjustment................... £24.99
                                                                               workshop usage.
                                                                               Supplied in a storage
                                                                               case. **Available
    POST FREE DELIVERY ON ALL ORDERS                                           while stocks last**
       WITHIN THE UNITED KINGDOM
       MINIMUM ORDER VALUE £10.00                                              CODE       TYPE                                                 PRICE
                                                                               040-019    Digital Dial Gauge...................Was £49.99. Now £39.99


66                                    SQ UIRE S T E L . 01243 842424 - FA X . 01842525
                               SQUIRES MODEL & CRAFT TOOLS
            WIGGLER AND CENTRE FINDER SET                                                                       SURFACE PLATE

WIGGLER SET for the accurate location of working points on drill                       GRANITE SURFACE PLATE a handy flat surface for measuring.
presses, milling and jig boring machines etc. Contents:- chuck                         Made entirely of granite it will always rename flat and changes in
holder, needle point, ball contact, disc contact attachments and off-                  temperature and humidity will not effect its accuracy. Dims 305 x
set indicator holder. All supplied in a plastic storage wallet. 2 stets                230 x 50mm. Flatness ±0.002mm
are available, a good qaulity budget set and a premium set manu-
factured by LS Starrett Company.




CODE       TYPE                                                   PRICE
040-707    L/C Wiggler and Centre Finder Set...................... £8.99               CODE       TYPE                                                PRICE
040-828    Starrett Wiggler and Centre Finder Set................ £39.99               040-191    Granite Surface plate 305 x 230 x 50mm............. £34.99

                                                                                       WORKSHOP ANGLE PLATES high quality angle plates used for
                       WATERLINE MARKER                                                layout and inspection work.
                                                                                       Manufactured from high quality
WATERLINE MARKER ideal for the accurate marking of water-                              close grain cast iron precision
lines on model ships, also useful                                                      ground flat and square. 3 sizes
for marking lines on many other                                                        are available.
models including model cars
and aeroplanes etc. Supplied
complete with pencil which can
be set at any position on the                                                          CODE       TYPE                                                       PRICE
pillar. Pillar height 200mm,                                                           PG2        Workshop Angle Plate 2" x 2" x 2".......................    £8.99
height overall 250mm.                                                                  PG3        Workshop Angle Plate 3" x 3" x 3".......................   £12.99
                                                                                       PG4        Workshop Angle Plate 4" x 4" x 4".......................   £19.99


                                                                                                          ENGINEERS MINI LEVELS

                                                                                       MOORE & WRIGHT MINI LEVEL a small general purpose pocket
                                                                                       level manufactured to exacting standards. It is manufactured from
CODE       TYPE                                                               PRICE    a single block of carbon steel and has a single vial. Ultra compact
EA7378     Waterline Marker.................................................. £14.99   dimensions:- Length 50mm, width 18mm, height 18mm. Accuracy
                                                                                       ±1°

                         SURFACE GAUGES

UNIVERSAL SURFACE GAUGE manufactured from tool steel
hardened and tempered and supplied
                                                                                       CODE    TYPE                                                 PRICE
with two pillars - 230mm and 300mm.
                                                                                       ELT001X Moore & Wright Mini Level with Single Vial.......... £11.99
The double-ended scriber can be
mounted in any position and set
                                                                                       MOORE & WRIGHT MINI LEVEL WITH VERTICAL PLUMB VIAL
at any angle on the pillar, final fine
                                                                                       a small general purpose pocket level manufactured to exacting
adjustment is obtained by the
                                                                                       standards. It is manufactured from a single block of carbon steel
adjusting screw on the base. The
                                                                                       and features a horizontal and vertical plumb vial. Compact dimen-
base has a 'V' groove for use on
                                                                                       sions:- Length 65mm, width 20mm, height 38mm. Accuracy ±1°.
cylindrical work and two retractable
gauge pins are provided. Base
width 80mm x 65mm.




CODE    TYPE                                                        PRICE
GASG39 Universal Surface Gauge..................................... £21.99             CODE    TYPE                                                   PRICE
M/W101B Moore & Wright Universal Surface gauge............ £84.99                      ELT002X Moore & Wright Mini Level with 2 Vials................ £24.99



          WHEN PLACING AN ORDER                                                               IF THERE ARE OTHER PRODUCTS
             PLEASE USE THE                                                                 THAT YOU WOULD LIKE US TO STOCK,
            FULL ORDER CODE                                                                 PLEASE FEEL FREE TO LET US KNOW.


                                 E -m a il: sa les@squire s t ool s . c om - w w w. s q u i re s t ool s . c om                                                67
                                SQUIRES MODEL & CRAFT TOOLS
                       CALIPERS & DIVIDERS                                                                        FLAT SQUARES
SPRING CALIPERS AND DIVIDERS used for comparative mea-                                   X-ACTO 3" TRIANGLE SQUARE a stainless steel triangle with
surements and marking out. Each has finely ground points and a                           permanently etched imperial graduations. The triangle square is
hand wheel                                                                               flat, to lay on the work piece.
for fine
adjustment.
3", 5"and 6"
sizes.



                                                                                         CODE      TYPE                                                         PRICE
                Outside              Inside              Spring
                                                                                         X7725     X-Acto 3" Triangle Square.................................... £4.50
                caliper              caliper             divider
                                                                                         X-ACTO 3" X 4" FLAT SQUARE a stainless steel flat square with
CODE        TYPE                                                                PRICE    accurate permanently etched imperial graduations. The square is
CA0023      Outside Caliper 3"................................................ £3.50     flat to lay on the work piece.
040-166     Outside Caliper 5"................................................ £4.99
CA0026      Outside Caliper 6"................................................ £6.50
CA0013      Inside Caliper 3"................................................... £3.50
040-165     Inside Caliper 5"................................................... £4.99
CA0016      Inside Caliper 6"................................................... £6.50
CA0033      Spring Divider 3"................................................... £3.50
040-167     Spring Divider 5"................................................... £4.99
CA0036      Spring Divider 6"................................................... £6.50

MOORE & WRIGHT SPRING CALIPERS AND DIVIDERS used
for comparative measurements and marking out. Manufactured                               CODE      TYPE                                                          PRICE
from high quality tool steel to exacting standards. Each has finely                      X7726     X-Acto 3" x 4" Flat Square.................................... £4.50
ground points and a hand wheel for fine adjustment. 3", 4" and 6"
sizes.                                                                                                       ENGINEERS SQUARES

                                                                                         MINIATURE ENGINEERS SQUARE with solid steel stock with
                                                                                         hardened, tempered and finely polished blade. Manufactured con-
                                                                                         forming to BS939 workshop grade
                                                                                         B for squareness.
                                                                                         Tolerance of the working
                                                                                         surface and the blade
                                                                                         edge falls within
            Outside                Inside                      Spring                    0.016mm/0.00064".
            caliper                caliper                     divider

CODE   TYPE                                                      PRICE                   CODE      TYPE                                                      PRICE
MW-523 Moore & Wright Outside Caliper 3"...................... £13.99                    041-101   Miniature Engineers Square 1"............................. £6.50
MW-524 Moore & Wright Outside Caliper 4"...................... £14.50
MW-526 Moore & Wright Outside Caliper 6"...................... £14.99                    FISHER ENGINEERS SQUARES solid steel stock with hardened,
MW-513 Moore & Wright Inside Caliper 3"......................... £13.99                  tempered and finely polished blades. Manufactured conforming to
MW-514 Moore & Wright Inside Caliper 4"......................... £14.50                  BS939 workshop grade
MW-516 Moore & Wright Inside Caliper 6"......................... £14.99                  B for squareness.
MW-503 Moore & Wright Spring Divider 3"......................... £13.99                  Tolerance of the working
MW-504 Moore & Wright Spring Divider 4"......................... £14.50                  surface and the blade
MW-506 Moore & Wright Spring Divider 6"......................... £14.99                  edge falls within
                                                                                         0.016mm/0.00064".

                          ODDLEG CALIPERS
                                                                                         CODE      TYPE                                                       PRICE
JENNY CALIPER oddleg calipers manufactured from polished tool                            041-002   Fisher Engineers Square to BS939B 2"...............         £8.50
steel. The marking point which is mounted on the offset leg is                           041-003   Fisher Engineers Square to BS939B 3"...............         £8.99
ground to a fine point and the straight leg has a locating spur.                         041-004   Fisher Engineers Square to BS939B 4"...............         £9.50
                                                                                         041-006   Fisher Engineers Square to BS939B 6"...............        £11.50
                                                                                         041-009   Fisher Engineers Square to BS939B 9"...............        £29.99
                                                                                         041-012   Fisher Engineers Square to BS939B 12".............         £39.99


                                                                                             POST FREE DELIVERY ON ALL ORDERS
CODE    TYPE                                                            PRICE
040-960 L/CJenny Calipers 6"............................................ £6.50
                                                                                                WITHIN THE UNITED KINGDOM
MW3415 Moore & Wright Jenny Calipers 5"....................... £10.99                           MINIMUM ORDER VALUE £10.00

68                                           SQ UIRE S T E L . 01243 842424 - FA X . 01842525
                           SQUIRES MODEL & CRAFT TOOLS
4 PIECE ENGINEERS SQUARE SET a set containing 4 carefully                   ADJUSTABLE ENGINEERS SQUARE a high quality precision
crafted engineers squares manufactured from high quality tool               adjustable square which is equally suited for engineering and cabi-
steel. The stock and blade are precision ground to ensure                   net making. The stock is supplied with 2 blades, one has square
straightness and accuracy, and the spring steel blade is hardened           ends, the other blade has a 45° and a 60° end, a small steel rule
and tempered for increased durability. Manufactured to BS939                with metric graduations is supplied which can also be held in the
workshop Grade B.                                                           stock. The stock can be fixed at any point along the blades and
Supplied in a                                                               locked in position.
wooden storage                                                              The blade lengths are
case containing                                                             4" and 2½" for the
2" , 3", 4" & 6".                                                           stock. All edges and
                                                                            faces are ground for
                                                                            squareness.

                                                                            CODE      TYPE                                                       PRICE
                                                                            040-010   Adjustable Engineers Square............................... £29.99
CODE      TYPE                                              PRICE
040-246   4 Piece Engineers Square Set to BS939B........... £37.99
                                                                                          ENGINEERS MARKING GAUGE
ENGINEERS KNIFE EDGE SQUARES a range of high quality
knife edge squares with solid steel stocks hardened, tempered and           ENGINEERS MARKING GAUGE a high quality precision marking
finely polished. These squares will lay flat on the work piece and          gauge which is equally suited for engineering and cabinet making.
facilitate precise visual control. The 50mm square is manufactured          It has permanent metric graduations which are easily read against
to DIN875/00 form C, the 100mm and 150mm sizes are manufac-                 the pearl chrome background. The setting can be locked using a
tured to BS939                                                              large knurled nut. Ideal for for transferring dimensions, rebate
Workshop Grade B                                                            depths etc. Graduations 0 - 200mm. All edges and faces are
for squareness.                                                             ground for squareness.
 Dimensions:-
040-050:- 50 x 40mm
59297:- 150 x 100mm
                                                                            CODE      TYPE                                                PRICE
CODE      TYPE                                                PRICE         040-020   Engineers Marking Gauge 0 - 200mm.................. £18.99
040-050   Engineers Knife Edge Square 50mm................... £29.99
59297     Knife Edge Square 150mm Was £29.95 - NOW.. £9.99                                        CENTRE SQUARES
STAINLESS STEEL FLAT ENGINEERS SQUARES a range of                           ENGINEERS CENTRE SQUARES used for fast and accurate
flat one piece sold steel squares which will lay flat on the work-          location of centres in any round stock, particularly useful for
piece. Manufactured from Inox steel to DIN875/0 for squareness              machinists, toolmakers and lathe work. Manufactured from quality
and parallelism. Use for                                                    tool steel, hardened and tempered. 2 sizes are available for maxi-
precision measuring in                                                      mum dia of 38mm/1½" and maximum dia of 76mm/3". Length
the workshop. Supplied                                                      overall 80mm and
in a hinged wooden box.                                                     140mm respectively.




CODE      TYPE                                                     PRICE
040-210   Precision Flat Squre 75 x 50mm.......................... £10.99
040-211   Precision Flat Squre 100 x 75mm........................ £12.99    CODE      TYPE                                                  PRICE
                                                                            040-003   Engineers Centre Square 38mm/1½"................... £6.99
ENGINEERS STOP SQUARES a range of precision stop squares                    040-004   Engineers Centre Square 76mm/3"...................... £11.99
similar to a flat engineers square but
with a extra piece added to the shorter
blade. This piece would be lined up to
                                                                                                          SCRIBES
the edge of the workpiece which
ensures accurate marking with the                                           MACHINISTS SCRIBER with a single hardened ground point and
blade on the work. The stop also                                            knurled body. Length 114mm/4½".
allows the square to stand freely,
this is ideal for use with a surface
                                                                            CODE      TYPE                                                    PRICE
plate for example. Manufactured
                                                                            040-086   Machinists Scribe 114mm/4½"............................. £1.99
from special steel to DIN875/11
for squareness and parallelism.
                                                                            ECLIPSE MACHINISTS SCRIBER a single ended scriber with
                                                                            knurled body and finely ground point. Length 5".
CODE      TYPE                                                  PRICE
040-300   Engineers Stop Square 75 x 50mm...................... £12.99
040-310   Engineers Stop Square 100 x 70mm.................... £14.99       CODE      TYPE                                                        PRICE
040-320   Engineers Stop Square 150 x 100mm.................. £18.99        ECL227    Eclipse Machinists Scriber 5"............................... £3.99


                             E -m a il: sa les@squire s t ool s . c om - w w w. s q u i re s t ool s . c om                                        69
                                SQUIRES MODEL & CRAFT TOOLS
ENGINEERS SCRIBER a double ended scriber with hardened and                              SLIM TUNGSTEN TIP SCRIBER a clutch pencil scriber with a
ground points. Length 7".                                                               0.5mm tungsten carbide point. It is ideal for all delicate scribing
                                                                                        and will scribe hardened materials including steel and ceramics.
                                                                                        The body is silver anodised and has a pocket clip. When not in
CODE   TYPE                                                              PRICE          use the point can be retracted into the body. Spare points are
SCR010 Engineers Scribe.................................................. £2.50         available. Length 5½".
ECL222 Eclipse Engineers Scriber.................................... £4.99
                                                                                        CODE   TYPE                                                         PRICE
HANDY SCRIBER double ended scriber with a point and a knife
                                                                                        SCR930 Slim Tungsten Tip Scriber.................................... £9.99
end for use as a scraper. Hardened and ground. Length 7".
                                                                                        SCR931 Spare Tip for Slim Scriber (0.5mm x 30mm)........ £1.50

                                                                                        CHINA MARKERS suitable for smooth writing on china, glass,
CODE   TYPE                                                                PRICE        plastics, rubber and smooth non porous and porous sufaces.
SCR020 Handy Scribe........................................................ £2.50
76229R Eclipse Handy Scriber.......................................... £7.99

ENGINEERS MINI POCKET SCRIBER a useful sized pocket                                     CODE       TYPE                                                         PRICE
scriber with a hardened steel reversible point and pocket clip.                         040-652    China Markers Pack of 2...................................... £1.00
Length 3½"/ 89mm.
                                                                                                  AUTOMATIC CENTRE PUNCH/SCRIBES
CODE         TYPE                                                       PRICE           SLIMLINE POCKET SCRIBE/AUTO CENTRE PUNCH a good
040-151      Engineers Mini Pocket Scribe............................... £3.50          quality a pencil type scriber for delicate scribing and doubles as an
                                                                                        automatic centre punch. When scribing, if a reference mark is
ENGINEERS POCKET SCRIBER a good quality pocket scriber                                  required, simply depress the scribe and an internal hammer mech-
with knurled grip and pocket clip. The tip is reversible for safe stor-                 anism strikes the point and a perfect mark is made. The punch is
age in the pocket when not in use. Length 125mm.                                        adjustable to allow for working hard or soft materials. The scribe
                                                                                        has a pocket clip. Length 150mm.

CODE         TYPE                                                         PRICE
34104        Engineers Pocket Scriber..................................... £4.99        CODE       TYPE                                                PRICE
                                                                                        040-023    Slim Pocket Scribe/Auto Centre Punch................ £6.99
TCT SCRIBER AND GLASS CUTTER a high quality scriber with
a tungsten carbide tip. It has a tip guard and pocket clip. Length                      SLIM SCRIBER/AUTO CENTRE PUNCH a pencil type scriber for
145mm.                                                                                  delicate scribing. A feature of this tool is that it also doubles as an
                                                                                        automatic centre punch. When scribing, if a reference mark is
                                                                                        required, simply depress the scribe and an internal hammer mech-
CODE         TYPE                                                      PRICE            anism strikes the point and a perfect mark is made. The punch is
040-657      TCT Scriber and Glass Cutter.............................. £2.99           adjustable to allow for working hard or soft materials. The scribe
                                                                                        has a pocket clip and spare points are available. Length 5½".
CARBIDE TIP SCRIBER with a single carbide point for marking
hardened material including steel and ceramics. The body is
leightweight aluminium, knurled for good grip and is fitted with a
pocket clip. Length 4½".                                                                CODE   TYPE                                                      PRICE
                                                                                        SCR206 Slim Scriber/Auto Centre Punch........................... £14.99
                                                                                        SCR207 Spare Tip for Slim Scriber/Auto Centre Punch..... £4.65
CODE         TYPE                                                          PRICE
040-470      Carbide Tip Scribe 4½"........................................ £3.99                               CENTRE PUNCHES

CARBIDE TIP SCRIBER with a single carbide point for marking                             PRIORY CENTRE PUNCHES a high quality range of hardened
hardened material including steel and ceramics. Heavy knurled                           steel punches carefully heat treated for long life. Precisely knurled
body with pocket clip. Length 5½".                                                      body with square head which gives good striking area and pre-
                                                                                        vents the punch from rolling. Manufactured in England.

CODE         TYPE                                                          PRICE
040-055      Carbide Tip Scribe 5½"........................................ £5.99
                                                                                        CODE       TYPE                                                          PRICE
POCKET SCRIBE WITH TUNGSTEN POINT a clutch pencil                                       CP-116     Priory Centre Punch 1/16".................................... £3.75
scriber with a tungsten carbide point. Ideal for all scribing and will                  CP-332     Priory Centre Punch 3/32".................................... £3.75
scribe hardened materials including steel and ceramics. The body                        CP-18      Priory Centre Punch 1/8"...................................... £3.75
is chrome finish, with a pocket clip. When not in use the point can                     CP-532     Priory Centre Punch 5/32".................................... £3.75
be retracted into the body.                                                             CP-316     Priory Centre Punch 3/16".................................... £3.75
                                                                                        CP-14      Priory Centre Punch 1/4"...................................... £3.75
                                                                                        ECL351A    Eclipse Centre Punch 1/8".................................... £3.99
                                                                                        ECL351B    Eclipse Centre Punch 5/32".................................. £3.99
CODE         TYPE                                                    PRICE              ECL351C    Eclipse Centre Punch 3/16".................................. £3.99
040-075      Pocket Scribe with Tungsten Point....................... £5.99             ECL351D    Eclipse Centre Punch 1/4".................................... £3.99


70                                          T E L . 0 1 2 4 3 8 4 2424              -      FA X . 01243 842525
                              SQUIRES MODEL & CRAFT TOOLS
AUTOMATIC CENTRE PUNCH a hand operated centre punch                                                           ENGINEERS BLUE
which does not require a hammer. The tool is held in an upright
position and then depressed for a perfect centre mark every time.                   MICROMETER ENGINEERS MARKING BLUE gives a clear mark
Adjustable for hard/soft materials, light/heavy indents. Heavy                      on any metal in any light,
knurled body for easy handling. Length 130mm.                                       and being a lubricant it
                                                                                    cannot damage bearings
                                                                                    or other working parts.
CODE       TYPE                                                         PRICE       Supplied in a 38g tin.
040-289    Automatic Centre Punch....................................... £3.99

MINI AUTOMATIC CENTRE PUNCH a mini automatic centre
punch which is is deal for making light indents to heavy punching
without using a hammer. The pressure can be varied from 5lbs to                     CODE   TYPE                                                               PRICE
approximately 30lbs simply by rotating the head. Length 116mm.                      EGBLUE Engineers Blue..................................................... £4.50


CODE       TYPE                                           PRICE                                             TRANSFER PUNCHES
040-071    Mini Automatic Centre Punch 116mm 5-30lb....... £8.99
                                                                                    TRANSFER PUNCHES a pair of unique punches used for trans-
AUTOMATIC CENTRE PUNCH an expert quality heavy duty auto-                           ferring the positions of holes from one piece of work to another.
matic centre punch with special S2 steel tip for marking hard mate-                 One punch has 5 locating diameters varying from 6 - 19mm, the
rials. Adjustable striking force, with knurled body for easy han-                   other has a conical end for transferring the positions of counter-
dling.                                                                              sunk holes. The master is placed on top of the new piece of mate-
                                                                                    rial, a light tap with a hammer is required to drive the spring loaded
                                                                                    punch into the new workpiece below. The working length of the
CODE       TYPE                                                         PRICE       punch is 30mm, overall
13612      Automatic Centre Punch....................................... £8.99       length is 110mm.
                                                                                    Supplied as a pair.
H/D AUTOMATIC CENTRE PUNCH an automatic centre punch
which is is deal for making light indents to heavy punching without
                                                                                    CODE        TYPE                                                           PRICE
using a hammer. The pressure can be varied by rotating the head.
                                                                                    040-026     Transfer Punches Pair.......................................... £8.99

                                                                                    TRANSFER PUNCH SET a full set of transfer punches ranging
CODE       TYPE                                              PRICE                  from 3/32" to 1/2" diameter. They are used to transfer the position
040-101    H/D Automatic Centre Punch 150mm.................. £7.99                 of holes drilled in one workpiece to another quickly and accurately.
                                                                                    The master workpiece is
PRIORY 271 AUTOMATIC CENTRE PUNCH a high quality auto-                              placed on top of the next
matic centre punch which is is deal for making light indents to                     workpiece, the punch is
heavy punching without using a hammer. The depth of impression                      placed in the hole and the
can be adjusted via the screw cap for light indents to heavy punch-                 small point on the end the
ing.                                                                                punch marks the position of
                                                                                    the next hole to be drilled.
                                                                                    The punches are hardened
CODE       TYPE                                            PRICE                    and ground. Supplied as a
040-271    Priory 271 Automatic Centre Punch 160mm........ £15.99                   set of 28 punches in a
                                                                                    storage stand. Length
                                                                                    of punches 4-7/8".
                   OPTICAL CENTRE PUNCH
                                                                                    CODE        TYPE                                                        PRICE
OPTICAL CENTRE PUNCH a precision tool which provides a sim-                         040-031     28 Piece Transfer Punch Set................................ £24.99
ple yet accurate method of precise centre punching on finely
scribed work. It consists of a steel holder, 2 clear acrylic rods and                                       DRIVE PIN PUNCHES
2 hardened steel punches with a 60° and 90° point. The acrylic
rods have an engraved cross on one and a bullseye on the other.                     MINIATURE PIN PUNCH SET a high quality miniature pin punch
The rods are used to sight the positioning, acting to carry light and               supplied with 2 spare tips. Used for various applications including
to magnify at the same time. Once aligned the base which has a                      driving miniature pins, and producing rivet marks in thin sheet.
non-slip surface on the underside, is held firmly and the acrylic rod               Available with either 0.8mm or 1.0mm tips. Note the tips are not
is exchanged for the chosen punch                                                   interchangeable.
which is the lightly struck leaving an
indentation in the precise position.                                                CODE        TYPE                                                      PRICE
The position can be re-checked if                                                   041-000     Miniature Pin Punch 0.8mm................................. £5.99
required by replacing the acrylic rod.                                              041-001     Miniature Pin Punch 1.0mm................................. £5.99
Base diameter 48mm, diameter of
punches 9.5mm. Supplied in a
wooden box.                                                                                    WHEN PLACING AN ORDER
                                                                                                  PLEASE USE THE
CODE       TYPE                                                            PRICE
040-244    Optical Centre Punch........................................... £28.99
                                                                                                 FULL ORDER CODE

                                 E -m a il: sa les@squire s t ool s . c om - w w w. s q u i re s t ool s . c om                                                 71
                               SQUIRES MODEL & CRAFT TOOLS
4" DRIVE PIN PUNCH SET hardened parallel pin punches ideal                                           LETTER & NUMBER STAMPS
for driving shafts and removing cotter pins etc. Knurled body with
centreless ground tip.                                                               NUMBER & LETTER STAMP SET a combined set of numbers
The 1/16" punch is                                                                   and letters for marking metals and other solid materials. The set
available individually.                                                              contains the letters A to Z plus '&' and numbers 0-8 (6 is used
                                                                                     twice). Two sizes of figure height 1/16" (1.6mm) and 1/8" (3mm).
DPPS10 sizes:-                                                                       Manufactured from a quality steel and supplied in a storage box.
1/16" 3/32"
1/8" 5/32"
CODE   TYPE                                                           PRICE
DPP116 Drive Pin Punch 1/16".......................................... £2.50
DPPS10 Drive Pin Punch Set 1/16"-5/32"........................... £5.99

PARALLEL PIN PUNCH 3/32" a parallel pin punch with a heavy
knurled body and 3/32" pin punch. The length overall is 150mm
with a 43mm parallel drive.

                                                                                     CODE    TYPE                                               PRICE
CODE        TYPE                                               PRICE                 040-009 Number & Letter Stamp Set 1/16" (1.6mm).......... £10.99
DPP007      Parallel Pin Punch 3/32" - Length 150mm............ £2.99                CPNL05 Number & Letter Stamp Set 1/8" (3mm)............... £12.99
PARALLEL PIN PUNCHES long pattern 200mm overall length                               NUMBER STAMP SET for marking metals and other solid materi-
with 90mm parallel drive. 5 sizes available individually and a set                   als. Manufactured from high quality steel, heat treated to give
containing one of each size in a wallet.                                             maximum endurance and accuracy of impression. The set contains
                                                                                     0-8 (6 is used twice), stamp height 1/8" (3mm). Made in England,
                                                                                     supplied in a plastic storage case. A range of economically priced
CODE        TYPE                                                            PRICE    imported sets are also available with figure heights of 1/8", 3/16"
19675       Parallel Pin Punch 1/8"......................................... £2.90   and 1/4".
19676       Parallel Pin Punch 3/16"....................................... £2.90
19677       Parallel Pin Punch 1/4"......................................... £2.90
19678       Parallel Pin Punch 5/16"....................................... £2.90
19679       Parallel Pin Punch 3/8"......................................... £3.65
19674       5 Piece Parallel Pin Punch Set............................. £15.99

SLIDING PUNCH SET a set of sliding punches used by clock
makers and engineers for chasing pins or dowels on fine equip-
ment. When chasing a small pin or dowel with a conventional pin
punch the punch spindle may sometimes buckle in use if the pin is
stuck. The body of the punch is slid down to the end of the punch
so that the whole punch is placed over the job. The punch is then                    CODE      TYPE                                                          PRICE
gently tapped with a hammer to move the pin, the body of the                         CPN110    Priory Number Stamp Set 1/8"............................. £13.99
punch is supports the spindle of the punch. The punches are                          37336     Number Stamp Set 1/8"........................................ £6.99
made from chrome vanadium steel, the sliding punch body is nick-                     37337     Number Stamp Set 3/16"...................................... £9.99
el plated. The sizes included in the set are:- 0.9, 1.4, 1.8, 2.4, 2.8,              37338     Number Stamp Set 1/4"........................................ £10.99
3.4, 3.9 and 5.9mm.
Supplied in a wallet.                                                                LETTER STAMP SET for marking metals and other solid materi-
                                                                                     als. Manufactured from high quality steel, heat treated to give max-
                                                                                     imum endurance and accuracy of impression. The set contains A
                                                                                     to Z and '&'. The stamp height is 1/8" (3mm). Made in England,
                                                                                     supplied in a plastic storage case. A range of economically priced
                                                                                     imported sets are also available with figure heights of 1/8", 3/16"
                                                                                     and 1/4".



CODE        TYPE                                                          PRICE
040-028     8 Piece Sliding Punch Set.................................... £26.99


           OUR SHOP IS NOW OPEN
            AT 100 LONDON ROAD
               BOGNOR REGIS
                                                                                     CODE      TYPE                                                             PRICE
          MONDAY - FRIDAY 9.00 - 5.30                                                CPL100    Priory Letter Stamp Set 1/8"................................. £29.99
            SATURDAY 9.00 - 5.30                                                     37333     Letter Stamp Set 1/8"........................................... £17.99
                                                                                     37334     Letter Stamp Set 3/16"......................................... £27.99
         FREE PARKING FOR 2 HOURS                                                    37335     Letter Stamp Set 1/4"........................................... £28.99


72                                        SQ UIRE S T E L . 01243 842424 - FA X . 01842525
                              SQUIRES MODEL & CRAFT TOOLS
AUTOMATIC NUMBER AND LETTER STAMP SET a 38 piece                                                 SLATER’S TRACK BUILDING GAUGE
letter and number stamp set for use on wood or metal surfaces.
The set contains 9 number stamps (0 to 8) and 26 letter bits (A to                    SLATER’S TRACK GAUGE a precision gauge for use when con-
Z), one period bit, one ampersand bit, a brass auto centre punch,                     structing 7mm track.
all in a plastic storage case. Character size is 1/8".                                Brass construction.


                                                                                      CODE      TYPE                                                            PRICE
                                                                                      S71510    Slater’s Track Gauge............................................ £7.40


                                                                                                                  WIRE GAUGE

                                                                                      WIRE GAUGE METRIC/IMPERIAL manufactured from heavy
                                                                                      gauge stainless steel. Used for
                                                                                      measuring the gauges of steel
CODE      TYPE                                                PRICE                   wire, hot and cold rolled sheet
040-138   Automatic Letter & Number Stamp Set................ £14.99                  steel. The metric dimensions
                                                                                      are recorded on one side and
                    TOOL MAKERS CLAMPS                                                gauge marking is on the other.
                                                                                      A low cost version is also
TOOLMAKERS CLAMPS case hardened steel jaws with tempered                              available.
clamping screws. The screw
heads are knurled and have                                                            CODE      TYPE                                                      PRICE
cross holes for tightening.                                                           040-036   Wire Gauge Metric/Imperial 0 - 36........................ £19.99
Screw clips keep the jaws in                                                          040-492   L/C Wire Gauge Metric/Imperial 0 - 36................. £9.99
place. Used for clamping small
items while drilling and tapping etc.                                                                        SPRING BALANCES
CODE      TYPE                                                           PRICE        SPRING BALANCE a range of low cost spring balances for a
CL0040    Toolmakers Clamp 2"........................................... £4.99        quick and easy method of weighing. It has a traditional style face
CL0042    Toolmakers Clamp 2-1/2"..................................... £4.99          with clear and easy
CL0045    Toolmakers Clamp 3"........................................... £5.99        to read metric and
CL0050    Toolmakers Clamp 4"........................................... £6.99        imperial graduations.
CL0055    Toolmakers Clamp 6"........................................... £12.99
ECL410    Eclipse Toolmakers Clamp 2".............................. £20.99
ECL411    Eclipse Toolmakers Clamp 3".............................. £21.99            CODE      TYPE                                                      PRICE
ECL412    Eclipse Toolmakers Clamp 4".............................. £29.99            040-079   S/L Spring Balance 12.5Kg/25lb........................... £3.50
                                                                                      040-081   S/L Spring Balance 25Kg/50lb.............................. £3.99
                                                                                      040-083   S/L Spring Balance 50Kg/112lb............................ £4.99
                        V-BLOCK & CLAMP
                                                                                      CK POCKET BALANCE a range of pocket spring balances with
MACHINIST V-BLOCK AND CLAMP SET a matched pair of V-                                  brass scale and black lacquered body, the hook and ring is tinned
blocks and screw clamps. Manufactured from a hardened tool                            for corrosion protection. Calibrated in 1lb/½Kg divisions.
steel and supplied as a
matched and numbered
pair. The 'V' angles are
precision ground central,                                                             CODE      TYPE                                                         PRICE
parallel and square to                                                                049-025   CK Pocket Balance 12.5Kg/25lb..........................       £6.85
the sides and ends. The                                                               049-032   CK Pocket Balance 15Kg/32lb.............................      £7.99
V capacity is 25mm.                                                                   049-044   CK Pocket Balance 20Kg/44lb.............................      £8.30
Supplied as a set of two                                                              049-050   CK Pocket Balance 23Kg/50lb.............................      £8.50
blocks and two clamps.                                                                049-066   CK Pocket Balance 30Kg/66lb.............................      £8.85
                                                                                      049-088   CK Pocket Balance 40Kg/88lb.............................     £13.60
                                                                                      049-211   CK Pocket Balance 50Kg/112lb...........................      £14.75
CODE      TYPE                                                               PRICE
CL0060    Machinist V-Block................................................. £26.99   HANGING SCALES a quick and easy method of weighing.
                                                                                      Robust metal casing with a durable
BENCH BLOCK a 75mm diameter bench block which is ideal for                            painted finish. Clear and easy to
supporting small items. With                                                          read metric scale in 50g increments.
a hardened and polished steel                                                         Simple method of calibration for
base.                                                                                 comparison weighing.




                                                                                      CODE      TYPE                                                           PRICE
CODE      TYPE                                                            PRICE       040-017   Hanging Scales 5Kg............................................. £3.75
040-603   Bench Block 75mm............................................... £15.99      040-001   Hanging Scales 10Kg........................................... £3.99


                                E -m a il: sa les@squire s t ool s . c om - w w w. s q u i re s t ool s . c om                                                   73
                                SQUIRES MODEL & CRAFT TOOLS
HANGING SCALES an accurate and quick method of weighing                                                           HELPING HANDS
and measuring. Large 65mm diameter
dual dial displays both metric and                                                        HEAVY DUTY HELPING HANDS WITH GLASS MAGNIFIER a
imperial. Convenient integral 1m                                                          variation of the popular Helping Hands with an extra large glass
tape measure. Robust metal handle                                                         lens. The 90mm glass lens gives clear undistorted magnification
and hanging hook.                                                                         of x2½. The magnifier is mounted to the cross bar using ball joints
                                                                                          allowing universal positioning of the lens. The crocodile clip
                                                                                          "hands" are mounted on a cross bar which is mounted on a ball
                                                                                          joint. The height of the lens and the "hands" can be raised or low-
                                                                                          ered on the column. Ideal for soldering, assembling, painting etc.
CODE       TYPE                                                          PRICE
040-420    Hanging Scales 22Kg........................................... £4.50


                       MEASURING WHEELS

MICRO MEASURING WHEEL the telescopic shaft extends
between 350 and 810mm. Durable patterned handle for extra grip.
Clear and easy to read metric dial measuring 0 - 999m with an
accuracy of +/- 2%.




CODE       TYPE                                                    PRICE
                                                                                          CODE       TYPE                                              PRICE
040-436    Micro Measuring Wheel 0 - 999M......................... £14.99
                                                                                          020-861    H/Duty Helping Hands with Glass Magnifier......... £5.99
MINI MEASURING WHEEL a compact, foldaway mini measuring
wheel with distance range of                                                                                     VACUUM CLEANER
0-9999m. The comfortable
telescopic handle extends                                                                 MINIATURE VACUUM CLEANER a powerful battery operated
460-900mm. Sturdy dual                                                                    mini vacuum cleaner which is ideal for removing dust and fluff from
wheels give good stability                                                                models such as dolls houses, model railway layouts, static diora-
and analogue display contains                                                             mas, keyboards and PCB's. It is also useful for reclaiming scatter
an instant zero button.                                                                   materials such as ballast, as used in model railways. The vacuum
Foldaway wheel for storage                                                                cleaner which is supplied with two heads: a long reach nozzle and
into canvas carrying bag.                                                                 a brush, is also effective on relatively large areas without the noz-
                                                                                          zle attachments. The dust compartment is easily removed for
CODE       TYPE                                                    PRICE                  emptying, and the inlet has a diaphragm valve to prevent the con-
040-077    Mini Measuring Wheel 0 - 9999M......................... £24.99                 tents from spilling out. The filter is also easily removed for clean-
                                                                                          ing. Powered
                                                                                          by 4 AA cells
                            INCLINOMETER                                                  (not supplied).

INCLINOMETER ideal for roofing, scaffolding and general angle
measurement. Clear and easy
to read dial divided into 90°
quadrants. It has a durable
                                                                                          CODE   TYPE                                                       PRICE
100mm diameter plastic
                                                                                          CTMV10 Miniature Vacuum Cleaner................................... £5.99
housing with a convenient
magnetic base.


                                                                                             OUR SHOP IS NOW OPEN
CODE
040-471
           TYPE                                                                  PRICE
           Inclinometer.......................................................... £4.99
                                                                                              AT 100 LONDON ROAD
                                                                                                 BOGNOR REGIS
           OUR SHOP IS NOW OPEN                                                             MONDAY - FRIDAY 9.00 - 5.30
            AT 100 LONDON ROAD
               BOGNOR REGIS                                                                   SATURDAY 9.00 - 5.30
          MONDAY - FRIDAY 9.00 - 5.30
            SATURDAY 9.00 - 5.30                                                                           FREE PARKING
                                                                                                            FOR 2 HOURS
       FREE PARKING FOR 2 HOURS

74                                         SQ UIRE S T E L . 01243 842424 - FA X . 01842525

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:128
posted:5/28/2011
language:English
pages:16