Spec 2000 from 3501 thru 3850

							                                                                         3803.2

                                   3801
                            Rigid Steel Conduit
3801.1 Scope
    This Specification covers rigid steel conduit and fittings for
electrical systems.
3801.2 Requirements
    Rigid steel conduit and fittings shall conform to the Federal
Specification No. WW-C-581 (Class 1).
    All rigid steel conduit and fittings shall be hot-dip galvanized on
both the inside and outside surfaces.
3801.3 Inspection and Testing
    Each length of conduit shall bear the Underwriters' Laboratories
Inc. (UL) label.
    The Department reserves the right to sample, test, inspect, and
accept or reject conduit or fittings based on its own tests.


                                  3802
                       Intermediate Metal Conduit
3802.1 Scope
    This Specification covers intermediate metal conduit and fittings for
electrical systems.
3802.2 Requirements
    Intermediate metal conduit and fittings shall conform to the Federal
Specification No. WW-C-581 (Class 2).
    All intermediate metal conduit and fittings shall be hot-dip
galvanized on both the inside and outside surfaces.
3802.3 Inspection and Testing ............................................... 3801

                                  3803
                           Non-Metallic Conduit
3803.1 Scope
    This Specification covers non-metallic conduit and fittings for
electrical systems.
3803.2 Requirements
    Non-metallic conduit and fittings shall conform to the Federal
Specification No. W-C-1094.
    If the Contract fails to specify the type of conduit to be furnished,
heavy-wall rigid PVC Schedule 40 plastic conduit and fittings shall be
furnished, except all conduit runs under roadway surfaces shall be




                                      979