B Max Setup Beasley Composites by mikeholy

VIEWS: 67 PAGES: 1

									                                                    KART SET UP SHEET
Kart Model: Arrow AX8 BMAX                                  Driver : Bart Price
Class _______Rotax Light________ Event _____S.A Open Titles________ Date: 2005
AXLE SIZE: ______50mm______ AXLE LENGTH: ___1030mm___AXLE TYPE: ____Hard____
 REAR AXLE BEARINGS: 2 or 3? ____3____
 FRONT CRASH BAR: TIGHT ________ LOOSE _______
 REAR CRASH BAR: TIGHT _______ LOOSE ________
 FRONT TRACK ___15_____ mm OF SPACERS INSIDE WHEEL.
 REAR TRACK ___1385__ mm OVERALL WIDTH TO OUTSIDE EDGE OF WHEELS.
 FRONT WHEEL ALIGNMENT: ZERO ______ TOE IN ______ mm TOE OUT __ 2___ mm
 FRONT CASTOR: MINIMUM ________ CENTRAL _______ MAXIMUM ________
 FRONT CAMBER: ZERO ________ POSITIVE ___4____ mm NEGATIVE ____6____ mm

 STUB AXLE: Inner holes_____________ Outer holes_____________

 TIE ROD MOUNTING HOLE: Inner holes_____________ Outer holes_____ ________
 SEAT POSITION: A ___23____ mm B ___205_____ mm C __95____ mm
 SEAT STAYS: TIGHT ________ LOOSE ________
 SIDE TORSION BAR: IN ________ OUT ________
 FRONT TORSION BAR: IN _______ OUT _______
 REAR TORSION BAR: OUT ________ VERTICAL ________ FLAT ________
 REAR CIK CROSS BAR: TIGHT ________ LOOSE ________ REMOVED _______
 TYRE PRESSURE: FRONT LEFT ___13.5__ FRONT RIGHT ____13.5____ PSI __ BAR __
 TYRE PRESSURE: REAR LEFT ___13.5___ REAR RIGHT ___13.5__ PSI ___ BAR ____
 WHEEL FRONT TYPE: _________Std Futura___________________
 WHEEL REAR TYPE: __________ Std Futura ____________________
 FRONT HUB LENGTH: __________
 REAR HUB LENGTH: _____90mm_____
 SIDE POD BARS: LOOSE ________ TIGHT _______
 FRONT RIDE HEIGHT: LOW ________ MIDDLE ________ HIGH _________
 REAR RIDE HEIGHT: LOW ________ MIDDLE _______ HIGH ________
OTHER SPECIAL DETAILS: ____________________________________

D:\Docstoc\Working\pdf\e00eadd2-f0f3-4f8b-9c1b-4912d888a26e.doc

								
To top