Docstoc

dropsa

Document Sample
dropsa Powered By Docstoc
					Single Line Restrictor
The 01 Single Line System operates by distributing the
output of a pump over a number of Meter Units.
This system provides a simple and very cost effective method of oil lubrication on small
machine applications such as: wood-working machines, shoe making machines, small
machine tools, printing machines




Advantages:
- Entry level low cost lubrication system
- Different solutions to best fit any application need
- Easy to expand or change the meter units
- Orifices can be built into machinery

Typical Applications:
- Small Machine Tools
- Woodworking Machines
- Small Printing Machines
- Textile Machines



Single Line System basic concept

The 01 System consists of meter units (calibrated 'orifices') that balance the distribution
line pressure and divide the oil from the pump proportionally across the meter units.
A Smile pump with an "01 System" represents one of the lowest priced entry level
centralized lubrication systems on the market today whilst maintaining high reliability
and appearance.
Meter Units
The Meter Units can be intermittent or continuous lubrication. Used to partition the oil
between the lubrication points.
Intermittent Meter Units contain a check valve to prevent back flow.
The vast range amply covers all practical requirements.
Meter Units may be fitted either directly to the bearing or grouped in Juctions




       Spiral meter unit

Spiral Meter Units for Continuous Lubrication
Spiral Meter Unit features
For use on high precision mechanisms, or fo hidh speed rotating bearings where it is
necessary to mantain a continuous film.
Availabe for flow rates of a few mm³/hour up to very high flow.
Suitable for use with pure mineral oil with a maximum viscosity of 1500 cSt (6942 SUS)
at the working pressure
       Spiral meter unit

Cylindrical Meter Units for Continuous Lubrication
Cylindrical Meter Unit features
For use on mechanisms that work intermittently, or lightly loaded.
Pressure from 1 to 10 bar (from 14.7 to 147 psi).
Suitable for use with pure mineral oil with a maximum viscosity of 1000 cSt at 40 °C
(4628 SUS at 104 °F).


 Dual Line System
Simple and reliable particularly in harsh environmental
Lubrication systems engineered with the Dual Line system are generally used on large
scale machinery and in harsh operating conditions to lubricate multiple points on large
machines. The system can grow to a very complex one with a length that often can
exceed 60 meters. The large section of pump packages together with many custom design
options allows any lubrication system to be developed reliably and cost-effectively.

DropsA skilled engineers are available to design large scale project and provide
installation, commissioning, support and training anywhere in the world.




Advantages:
- Can be used at high pressures (500 Bar / 7000 psi)
- Easy Expansion or modification of the system
- Modular Elements (using the modular dual-line system) allows the element to be
changed quickly and without disconnecting pipe work.
- In the event of a blocked point or element, the remainder of the lubrication system
continues to operate normally.
Typical Applications:
- Paper Machines
- Steel Plants
- Cement Works
- Large Cranes and Loading Equipment




Download

To access the documentation download area, please sign in with the login box on the
top left of the page or register.

Dual-Line System basic concept




       The Dual Line distributor valves can be installed next to the lubrication point
       avoiding the need for complex pipework.


In Dual Line system exist two main lines both of them actuated alternately by means of a
changeover valve.
A lubrication cycle is completed when both main lines have to be alternately pressurised
and be relieved of pressure.

The system is a parallel type and each dual-line valves operates independently of any
other in the system, therefore, in the event of one lubrication point becoming blocked or
failing, the remainder of the system is not affected and continues working without
problems.
Single Line Injectors
Positive Displacement Injectors




This System consists of the latest direct positive displacement injector technology
developed by Dropsa.

Used in a large range of application, total loss oil lubrication involves creating a thin oil-
film between moving parts which is renewed at regular intervals by an automated
lubrication system.




Download


To access the documentation download area, please sign in with the login box on the
top left of the page or register.

Single Line Injectors basic concept

This technology provides precise and fail-safe dosage of oil independent of viscosity,
temperature or pressure.
Additionally, the new cartridge format allows substantial new application possibilities.
Also it is entirely produced, assembled and tested on an automated production line
offering unprecedented value for money and quality.
When combined with a competitive pump package, such as the electrically driven Smart
Pump, high performance system can be obtained at good prices.
Our push-lock system allows further reduction in installation cost.


Serial 26 Progressive System
High assurance of lubricating system operation and
monitoring
The Serial 26 progressive feeder is the key part to the system allowing the metered
dispensing of grease under pressure to each point in the lubrication system. The modular
system of progressive distributor offers flexibility advantages for system design engineers
and low cost maintenance advantages.

Serial 26 Progressive system is used mainly for grease lubrication in total loss or re-
circulating oil systems. High Pressures and long pipe runs are common requirements as
operating or environmental demanding conditions. Serial 26 can be used also as zoned
system when irregular cycle conditions for different parts of the machine are requested.

The design parameters of a progressive systems include many variables such as volume
and frequency of grease required at each point, number of points, operating conditions,
pump pressure, etc. DropsA skilled engineers are available to design large scale project
and provide installation, commissioning, support and training anywhere in the world.
Advantages:
- Can be used at high pressures
- Easy Expansion or modification of the system
- Modular Elements (using SMO-SMX progressive distributor) allow the element to be
changed quickly and without disconnecting pipe work.
- Modular concept provides low cost replacement of components
Typical Applications:
- Machine Tools, particularly medium-large sized systems
- Transfer lines
- Small-Medium Grease lubricated machinery - E.g. woodworking
- Presses (generally for Oil re-circulation)
- Cement Plants
- Mining
- Steel and Chemical
- Pulp & Paper, Printing
- Offshore and Marine
- Gas and Petrochemical
- Chassis and Mobile Equipment




Download


To access the documentation download area, please sign in with the login box on the
top left of the page or register.

Serial 26 progressive basic concept




Smart2
   1. Downloads
   2. Part Numbers
Lufricant pumps for Orifice (01) and Injector (33V)
Lubricant Systems

Specifications:
- Reservoir Capacity: 3lt ( 0.660 galls) in oil-proof rasparent plastic
- Compatible lubricant: Mineral oil
- Storage temperature: --4°F ÷ + 140°F
- Working Temperature +41°F ÷ +140°F
- Electrical power 110/230 V AC 50H - 110/230 V 60HZ
- Max pressure: 441psi ( 30bar)



The SMART2 range oil lubrication pumps provides innovative pump packages for the
machine Tool Industry.
The SMART2 Electric Pump has been designed for systems with a working pressure of
up to30 bar.

The pumps are available either with a built in controller card which controls the entire
system or the manual version can be connected to a separate control device.
It is suitable for systems requiring flow rates of up to 100cm³/min and pressure of up to
30 bar.

Innovative pump package for the machine tool industry
All units are fitted as standard with built in Pressure switch, Low Level Switch and
Pressure Gauge and PCB user interface.
Downloads


To access the documentation download area, please sign in with the login box on the
top left of the page or register.


   Have a question about this item?




Refine your search
Family

                         All
                         System 33V
                         Single Line System 01

Actuation

                         All
                         Electric
                         Manual

Element Type

                         Pump

Hertz

                         All
                         50 Hertz
                         60 Hertz

Lubricant

                         Oil

Output Min

                         All
                         201-1000 cmü (12,3-61 Cu.in.)
                         51-200 cmü (3,11-12,20 Cu.in.

Output Type
               Fixed

Voltage Operating

               All
               230 V AC Single phase
               110 V AC Single phase

Operating Pressure

               11-40 Bar (161-588 Psi)

Reservoir

               3 Lt (0,79 gallons)

Reservoir material

               Plastic

Working Temperature

               High -5 +120C (+23 +248F)

Max. Oil Viscosity

               460 cSt

Min. Oil Viscosity

               32 cSt

Part numbers - Models found

Availability Part Number           Description          Price Buy
             3600210     E-PUMP SMART2 VIP 110V-50HZ
             3600211     E-PUMP SMART2 VIP 110V-60HZ
             3600212     E-PUMP SMART2 VIP 220V-50HZ
             3600213     E-PUMP SMART2 VIP 220V 60HZ
             3600240     E-PUMP SMART2 110V-50HZ MANUAL
             3600241     E-PUMP SMART2 110V-60HZ MANUAL
             3600242     E-PUMP SMART2 220V-50HZ MANUAL
             3600243     E-PUMP SMART2 220V 60HZMANUAL
Part numbers - Accessories found

                  Part
Availability                                  Description                     Price Buy
                 Number
                           SAMBA LEVEL N.O. W/OUT TOP
               1655582
                           CONNECTOR
               6770070     OIL AUTOMATIC RELEASE PLUG


Top of the page.



Bravo
   1. Downloads
   2. Part Numbers




The small pump package with big features
Key features
-Modular stackable reservoirs & Minimum level as standard.
-Voltages available: 12V AC/DC, 24V AC/DC, 110V/230V 50/60 Hz, as standard.
-High performance flow and pressure rating.
-Integrated fixture: for SMP and SMPM distributors
-Multi connector system: allow many electrical connector types to be applied to the
standard product to suit varied OEM and end user requirements.
DESIGN AND ADVANCED SOLUTIONS
This small pump package contains many innovative features exclusive to DropsA
allowing fresh possibilities in lubrication systems engineering.
It is suited for not only for indoor industrial applications but also mobile plant and
vehicle lubrication systems.

VARIO-DRIVE: THE INNOVATIVE SYSTEM
VARIO-Drive is a new power management system for the pump motor that protects and
adjusts the pumping system electronically. That means increased reliability and greater
lifespan of the pump motor as well as the ability to electronically adjust the pump output
from 50% to 100% of its nominal value.
You will find that you are able to precisely control and engineer systems like never
before.

NEW GENERATION CONTROLLER
The integrated next generation control system is a central to delivering these new
solutions to the customer.
It allows five different ways to trigger and control the lubrication event in a system:

1. Time based interval: 0 min - 99 hours
2. Impulse Counter: 1 - 9999 cycles
3. Combined Trigger: both Timer and impulse counter
4. Impulse Driven: uses impulse input to determine both standby and operation mode (0-
9999 impulses)
5. Remote Only: Acts as Slave to host machine.
Downloads


To access the documentation download area, please sign in with the login box on the
top left of the page or register.


  Have a question about this item?




Refine your search
Family

                        Electric pumps

Actuation

                        Electric

Element Type

                        Pump

Hertz

                        50/60 Hertz Dual frequency

Lubricant

                        All
                        Grease
                        Oil

Output Min

                        0-50 cmü (0-3,05 Cu. in.)

Voltage Operating
                All
                24DC
                12VAC
                12DC
                110 V AC Single phase
                24AC
                230 V AC Single phase

Operating Pressure

                400 Bar

Reservoir

                All
                2 Lt (0,53 gallons)
                5 Lt (1,32 gallons)
                3 Lt (0,79 gallons)
                8 Lt (2,11 gallons)

Reservoir material

                Plastic

Working Temperature

                Extended -30 +80C (-22 +176F)

Grease Viscosity

                Max NGLI 2

Min. Oil Viscosity

                46 cSt

Part numbers - Models found

                   Part
Availability                         Description            Price Buy
                 Number
                0888400 BRAVO GREASE PUMP AUTOMATIC2KG 110-
                        230V AC
                        BRAVO GREASE PUMP AUTOMATIC5KG 110-
                0888401
                        230V AC
                 Part
Availability                          Description              Price Buy
                Number
                         BRAVO GREASE PUMP AUTOMATIC8KG 110-
               0888402
                         230V AC
                         BRAVO GREASE PUMP AUTOMATIC2KG 12-
               0888403
                         24V DC
                         BRAVO GREASE PUMP AUTOMATIC5KG 12-
               0888404
                         24V DC
                         BRAVO GREASE PUMP AUTOMATIC8KG 12-
               0888405
                         24V DC
               0888406
                         BRAVO MANUAL 2KG 110-220VAC
               0888407   BRAVO MANUAL 5KG 110-220VAC
               0888408   BRAVO MANUAL 8KG 110-220VAC
               0888409   Bravo manual 2kg 12VDC/AC
               0888410   Bravo manual 5kg 12VDC/AC
               0888411   Bravo manual 8kg 12VDC/AC
               0888412   BRAVO MANUAL 2KG 24VDC/AC
               0888413   BRAVO MANUAL 5kg 24VDC/AC
               0888414   BRAVO MANUAL 8KG 24VDC/AC
                         POMPA PER OLIO "BRAVO" AUTOMATICA
               0888415
                         2KG 110VAC/220VAC
                         POMPA PER OLIO "BRAVO" AUTOMATICA
               0888416
                         5KG 110VAC/220VAC
                         POMPA PER OLIO "BRAVO" AUTOMATICA
               0888417
                         8KG 110VAC/220VAC
                         POMPA PER OLIO "BRAVO" AUTOMATICA
               0888418
                         2KG 12VDC/24VDC
                         POMPA PER OLIO "BRAVO" AUTOMATICA
               0888419
                         5KG 12VDC/24VDC
                         POMPA PER OLIO "BRAVO" AUTOMATICA
               0888420
                         8KG 12VDC/24VDC
                         POMPA PER OLIO "BRAVO" MANUALE 2KG
               0888421
                         110VAC/220VAC
                         POMPA PER OLIO "BRAVO" MANUALE 5KG
               0888422
                         110VAC/220VAC
                         POMPA PER OLIO "BRAVO" MANUALE 8KG
               0888423
                         110VAC/220VAC
                         POMPA PER OLIO "BRAVO" MANUALE 2KG
               0888424
                         12V DC/AC
               0888425   POMPA PER OLIO "BRAVO" MANUALE 5KG
                 Part
Availability                          Description             Price Buy
                Number
                         12V DC/AC
                         POMPA PER OLIO "BRAVO" MANUALE 8KG
               0888426
                         12V DC/AC
                         POMPA PER OLIO "BRAVO" MANUALE 2KG
               0888427
                         24V DC/AC
                         POMPA PER OLIO "BRAVO" MANUALE 5KG
               0888428
                         24V DC/AC
               0888429   BRAVO MANUAL 8LT 24VDC/AC



Part numbers - Accessories found

                 Part
Availability                          Description             Price Buy
                Number
                         INTERRUTTORE INSTABILE VERDE 12V
               0039433
                         "PULSA 004" ALBERICI
                         BRAVO REMOTE CONTROL SWITCHAND
               0039434
                         LAMP 24V
               0765355   MOTOR.PUMP R1/15 KG 10
               0888038   Kit carttridge fat filling
               0888058   BRAVO PUMPING ELEM 6MM WITHBY-PASS



Pump Series 989000
   1. Downloads
   2. Part Numbers
Compact and low cost; ideal for applications on small-
medium size machine tools.

Key features
- Standard Equipment: refilling filter, electric minimum level and a pumping unit fixed or
adjustable delivery.
- Standard version can be integrated with up to three pumping unit.
- Two pumping units available: Ø 6 mm = 10 cm3/min delivery; Ø 8 mm = 17 cm3/min
delivery.
- Proven pumping technology: for 999 series pump elements.
- Pressure: 300 bar (4410 psi)
- Fixed and adjustable: pump elements.



COMPACT AND LOW COST
989 pump series is ideal for applications where space and costs are key factors. The pump
is perfectly integrated with the 999 pump series from which it inherits the main features
like: modularity, quality and performance. For these reasons Series 989 represents the
perfect solution for an extensive range of midsize applications.

STANDARD EQUIPMENT
The standard version is ready equipped to satisfy the requirements in small-medium
machine tools applications. The standard version of the pump is complete with refilling
filter, electric minimum level, a pumping unit with 6 mm or 8 mm diameter.

FIT YOUR APPLICATION NEEDS
989 pump series can fit the changing needs of your application. The availability of
installing up to two pumping unit (with fixed or adjustable delivery) gives you two
options: to triple the standard flow or connect three lubrication lines directly to the pump.
Fixed or adjustable delivery are available. The adjustable delivery is: 1,4 - 10 cm3/min
for 6mm diameter pump element and 2,5 - 17 cm3/min for the 8mm diameter.




Downloads


To access the documentation download area, please sign in with the login box on the
top left of the page or register.
  Have a question about this item?




Refine your search
Family

                        Electric pumps

Actuation

                        Electric

Element Type

                        Pump

Hertz

                        50/60 Hertz Dual frequency

Lubricant

                        Grease

Voltage Operating

                        All
                        220-380 V AC Threephase
                        24DC

Operating Pressure

                        <300 Bar (<4410 Psi)

Reservoir

                        5 Lt (1,32 gallons)

Working Temperature

                        Normal -5 +40C (+23 +104F)

Grease Viscosity
               Max NGLI 2

Output Max

               All
               2,5-17cc/min(0,15-1,03cu.in/m
               17 cc/min (1,03 cu.in/min)
               1,4-10cc/min(0,085-0,61cu.in/m
               10 cc/min (0,61 cu.in/min)

Part numbers - Models found

Availability Part Number             Description            Price Buy
             0989001     E-GREASE PUMP 5KG 1/30-•6 FIX
             0989002     E-GREASE PUMP 5KG 1/30-•8 FIX
             0989003     E-GRASE PUMP 5KG 1/30-•6 ADJ
             0989004     E-GREASE PUMP 5KG 1/30-•8 ADJ
             0989011     E-GREASE PUMP 5KG 1/30-•6 FIX24VDC
             0989012     E-GREASE PUMP 5KG 1/30-•8 FIX24VDC
             0989013     E-GREASE PUMP 5KG 1/30-•6 ADJ24VDC
             0989014     E-GREASE PUMP 5KG 1/30-•8 ADJ24VDC



Part numbers - Accessories found

                   Part
Availability                                 Description       Price Buy
                 Number
               0299041C    PUMPING UNIT ADJ. D6
               0299042C    PUMPING UNIT ADJ. D8
               0299642C    PUMPING UNIT FIX D6
               0299643C    PUMPING UNIT FIX D8
               0888036     BY-PASS VALVE 0-250 BAR ROLLO
                           PRESSURE GAUGE 400BAR/40MPA DN63
               3292099
                           1/4GAS



Pump Series 999000
   1. Downloads
   2. Part Numbers




Key features
- Operating pressure: up 75Mpa (750bar)
- Delivery: - Fixed: up to 33 cm^3/min - 1500 r.p.m.
          - Adjustable: up to 51 cm^3/min - 2200 r.p.m.
- Lubricant: - Oil viscosity 100cSt min
            - Grease NLGI 2



Modular pumps particularly suitable for the lubrication of small or medium size
machinery.
They are used for different types of oil and grease lubrication systems and in a very large
range of applications because of their high quality, high performance and low cost.

The modular construction of 999 series pumps enables easy dismantling for maintenance,
guarantees very high reliability and allows very fast adjustment of the units for different
operating conditions.

The semplicity of construction guarantees long life, reliability and simplified and reduced
maintenance.
The modularity of the components allows the system engineer to construct the lubrication
unit to meet the specific needs of the lubrication system it is serving.




Downloads
To access the documentation download area, please sign in with the login box on the
top left of the page or register.


  Have a question about this item?




Refine your search
Family

                        Electric pumps

Actuation

                        Electric

Element Type

                        Pump

Hertz

                        50/60 Hertz Dual frequency

Lubricant

                        All
                        Grease
                        Oil

Output Min

                        0-50 cmü (0-3,05 Cu. in.)

Output Type

                        All
                        Fixed
                        Adjustable

Voltage Operating

                        24DC

Operating Pressure
               All
               >400 Bar (>5880 Psi)
               460 Bar
               750 Bar
               200 Bar
               450 Bar
               410 Bar
               230 Bar
               300 Bar
               400 Bar

Reservoir

               All
               30 Lt (7,92 gallons)
               5 Kg
               10 kg
               6 Lt. (1,58 gallons)
               3 Kg
               11 Lt (2,90 gallons)
               30 Kg
               3 Lt (0,79 gallons)

Working Temperature

               Normal -5 +40C (+23 +104F)

Grease Viscosity

               Max NGLI 2

Min. Oil Viscosity

               15 cSt

Features

               All
               With hydraulic reverser
               1 way - 2 pumps
               Hydraulic reverser
               2way - 2 pumps

Dosing system

               All
            26
            02

Cc/min

            All
            5 + 34
            17
            25,5
            2,5 + 17
            1,4 + 9,5
            33
            9,5
            66
            34
            5 + 33

Part numbers - Models found

Availability Part Number               Description   Price Buy
             0999202     E-PUMP ADJ 33 K30 MET
             0999204     E-PUMP ADJ.9,5 K30 MET
             0999206     E-PUMP ADJ.17 K30 MET
             0999212     E-PUMP ADJ 33 K5 MET
             0999214     E-PUMP ADJ 9,5 K5 MET
             0999216     E-PUMP ADJ 17 K 5 MET
             0999222     E-PUMP ADJ 33 K10 MET
             0999224     E-PUMP ADJ 9,5 K10 MET
             0999226     E-PUMP ADJ 17 K10 MET
             0999232     E-PUMP ADJ 33 K3 MET
             0999234     E-PUMP ADJ 9,5 K 4 MET
             0999236     E-PUMP ADJ 17 K3 MET
             0999242     E-PUMP ADJ 33 3LT MET
             0999252     E-PUMP ADJ 33 L30 MET
             0999254     E-PUMP ADJ 9,5 30LT MET
             0999256     E-PUMP ADJ 17 L 30 MET
             0999262     E-PUMP ADJ 33 5LT MET
             0999264     E-PUMP ADJ 9,5 5LT MET
             0999266     E-PUMP ADJ 17 L5 MET
             0999272     E-PUMP ADJ 33 L10 MET
Availability Part Number                Description   Price Buy
             0999274     E-PUMP ADJ 9,5 L10 MET
             0999276     E-PUMP ADJ 17 L10 MET
             0999302     E-PUMP FIX 33 K30 MET
             0999304     E-PUMP FIX 9,5 K30 MET
             0999306     E-PUMP FIX 17 K30 MET
             0999312     E-PUMP FIX 33 5KG MET
             0999314     E-PUMP FIX 9,5 K5 MET
             0999316     E-PUMP FIX 17 K5 MET
             0999322     E-PUMP FIX 33 K10 MET
             0999324     E-PUMP FIX 9,5 K10 MET
             0999326     E-PUMP FIX 17 K10 MET
             0999332     E-PUMP FIX 33 3KG. MET
             0999334     E-PUMP FIX 9,5 K3 MET
             0999336     E-PUMP FIX 17 3KG MET
             0999346     E-PUMP FIX 17 3LT
             0999352     E-PUMP FIX 33 30LT MET
             0999354     E-PUMP FIX 9,5 30LT MET
             0999356     E-PUMP FIX 17 L30 MET
             0999362     E-PUMP FIX 33 L5 MET
             0999364     E-PUMP FIX 9,5 5LT MET
             0999366     E-PUMP FIX 17 5LT MET
             0999372     E-PUMP FIX 19 10LT MET
             0999374     E-PUMP FIX 9,5 10LT MET
             0999376     EL-PUMP FIS 17 L10 LAM
             0999501     E-PUMP FIX 17 K10 MET
             0999502     E-PUMP 9.5 ADJ LAM + KIT
             0999504     E-PUMP 10 KG
             0999505     E-PUMP FIX 17 K 5 MET+KIT
             0999506     E-PUMP FIX 17 K30 MET+KIT
             0999507     E-PUMP ADJ 17 K10
             0999508     E-PUMP ADJ 9,5 K5
             0999509     E-PUMP ADJ 17 K30
             0999510     E-PUMP ADJ K5 MET+KIT
             0999511     E-PUMP FIX 33 K10 MET+KIT
             0999513     E-PUMP FIX 33 K30 MET+KIT
             0999519     E-PUMP ADJ.9,5 K30
Availability Part Number                Description            Price Buy
             0999521     EL-PUMP ADJ.33 K30 MET+KIT
             0999523     EL-PUMP ADJ 17 K5
             0999525     E-PUMP ADJ 17 30 KG
             0999527     E-PUMP ADJ.33 K10
             0999528     EL-POMPA FIS 33 KG 5 LAM + KIT E
             0999529     EL-POMPA FIS 25 KG 5 LAM +KIT 24VCC *
             0999530     E-PUMP FIXED 17 K30 METAL+KIT
             0999532     E-PUMP ADJ.17 KG.30 +KIT
             0999533     E-PUMP FIX33 K10 MET+KIT CA
             0999538     E-PUMP ADJ. 17 L30 + KIT
             0999540     E-PUMP FIX 33 K30
             0999542     EL-POMPA FIS 33 KG 30 LAM +KIT CA
             0999545     EL-POMPA 2P REG 33 KG 30 +KIT
             0999546     E-PUMP ADJ 17 L10 MET
             0999547     EL-POMPA FIS 33 K 5 LAM+KIT
             0999548     E-PUMP ADJ.9,5 K10 MET+KIT
             0999549     E-PUMP FIX 17 KG.10 + KIT
             0999552     EL. POMPA REG. 9.5 K5 LAM+KIT CA *
             0999553     EL-POMPA REG 17 L30 LAM+KIT CA
             0999554     E-PUMP ADJ. 9,5 K30
             0999555     EL-PUMP ADJ 17 K3 MET+KIT
             0999556     E-PUMP ADJ. 9,5 L10
             0999557     E-PUMP FIX 17 K30
             0999558     E-PUMP RADJ 9,5 KG 30
             0999560     EL-POMPA FIS 17 KG30 LAM +KIT **
             0999562     E-PUMP ADJ. 34 KG.10 + KIT
             0999563     E-PUMP ADJ. 9.5 LT5 + KIT
             0999564     E-PUMP ADJ 9.5 L10 MET+KIT
             0999565     EL-POMPA REG9,5 L 5 LAM+KIN
             0999566     EL-POMPA FIS 33 K10 LAM+KIT CA
             0999568     E-PUMP FIX 33 KG 30 MET+KIT
             0999569     E-PUMP FIX 33CC KG.30
             0999570     E-PUMP FIX 17 KG.5 LAM+KIT
             0999571     E-PUMP FIX 9.5 KG 30 LAM+KIT
             0999575     EL-POMPA REG33 K30 LAM+KIT *
             0999577     E-PUMP REG 17 K10 MET + KIT
             0999578     E-PUMP REG.17 K.30 + KIT
Availability Part Number               Description                Price Buy
             0999580     E-PUMP FIX 17 L10 MET+KIT



Part numbers - Accessories found

Availability      Part Number                  Description            Price Buy
               0299443           KIT X LS IP 1WAY-350 BAR
               0299443 270/480
               60
               0299444           KIT FOR LS 2P 1 WAY- 350 BAR
               0299445           KIT FOR LS 2P 2US - 350 BAR
               0299450           BY-PASS VALVE 0-250 BAR
               0299451           BY-PASS VALVE 0-350 BAR
               0299452           BY-PASS VALVE 50-800 BAR
                                 KIT FOR D.LI•NE B-P 1P
               0299462
                                 HYDR.REVERSER
               0299463           PUMP ASSY KIT
               0299466           BY-PASS VALVE 0-250 BAR AISI 316L
               0299467           BY-PASS VALVE 0-350 BAR AISI 316L
               0299468           BY-PASS VALVE 50-800 BAR AISI 316L
               0299475           KIT FOR D.LINE B-P 2P HYDR.REVC
               0299481           KIT ASSY 1P 800 BAR
               0299482           KIT FOR LS 1P 1 OUTLET 200 BAR
               0299484           KIT FOR D.LINE 1OUTLET 200BAR
               0299485           KIT FOR LS 2P-2OUT. 800BAR
               0999531           EL-POMPA FIS 33 KG 30 LAM +KIT



Sumo
   1. Downloads
   2. Part Numbers
The flexible high performance heavy duty electric
grease pump solution

Key features
- Dual pump modules as standard for maximum uptime and redundancy
- Quick swap pump modules mean zero downtown and disruption to pipe-work during
pump maintenance.
- High output and pressure make large extended systems possible:- 400cm3/min (24cu.
in), 2x200 cm3/min Modules, 400 Bar (5880 psi)
- Electrical dual line inverter integrates directly onto outlet
- Minimum level capacitance switch and visual maximum level as standard
- Handles Grease NLGI 2
DUAL PUMPING MODULE
400cm3 (2x200cm3) pump modules installed in tandem configuration provide 400bar
(5880 psi) and redundancy .
This allows the system to continue working even if one pump module becomes
ineffective.
Sumo pump is suitable for large single line or dual line systems.

INSTRUMENTATION MODULES
Sophisticated add on instrumentation modules and options means even complex
requirements can be met with off-the-shelf standard product.

QUICK SWAP SYSTEM
Both pumping modules can be quickly replaced from the front mounting of the pump. No
pipe work needs to be disrupted meaning near-zero downtime during maintenance.

DUAL LINE OR SINGLE LINE IS EASY
The outlet plate fixing system has both Pressure and Return ports.
The outlets are directly compatible with Dropsa's electrical or pneumatic line inverters
(including Modular version).




Downloads
To access the documentation download area, please sign in with the login box on the
top left of the page or register.


   Have a question about this item?




Refine your search
Family

                         All
                         Serial 26 Progressive System
                         Dual Line System
                         Electric pumps

Output/Cycle

                         400 cmü

Operating Pressure

                         400 Bar

Reservoir

                         30 Kg

Reservoir material

                         Sheet metal

Working Temperature

                  

Max. Oil Viscosity

                         32cSt

Part numbers - Models found

Availability Part Number                                 Description        Price Buy
            1525212 15 MT
                                        POMPA SUMO 30KG CARR.FLEX 15M
Availability Part Number                Description              Price Buy
            2477000
                           POMPA SUMO 30KG A30002
            A30002
            2477001        SUMO GREASE PUMP 100KG
            2477050        SUMO OIL PUMP 30KG
            2477051        SUMO OIL PUMP 100KG
                           SUMO GREASE PUMP
               2477100
                           80KGTRANSPARENT RESERVOIR



Part numbers - Accessories found

                 Part
Availability                           Description               Price Buy
                Number
                         INVERTITORE ELETTROMAGNETICO24 V
               0083400
                         DC
                         INVERTITORE ELETTROMAGNETICO110 V
               0083401
                         AC
                         INVERTITORE ELETTROMAGNETICO220 V
               0083402
                         AC
               0083420   DIRECTIONAL MOD.VALVE 24V DC
                         DIRECTIONAL MODULAR VALVE 110V AC
               0083421
                         50/60HZ
               0083422   MODULAR VALVE 220V AC 50/60Hz
               0083450   INVERTITORE PNEUMATICO 24 V CC
                         INVERTITORE PNEUMATICO24 V CA 50/ 60
               0083451
                         Hz
                         INVERTITORE PNEUMATICO110 V CA 50/ 60
               0083452
                         Hz
                         INVERTITORE PNEUMATICO220 V AC 50/ 60
               0083453
                         Hz
               0295060   POMPANTE PORTATA VARIABILE
               0295130   KIT LIVELLO LASER 100 KG
               0295140   KIT SENSORE ULTRASUONI 30 KG
                         KIT LIVELLO GALLEGGIANTE PEROLIO
               0295150
                         30KG
                         KIT LIVELLO GALLEGGIANTE PEROLIO
               0295160
                         100KG
               0295210   ASSIEME SERBATOIO 80KG TRASPARENTE
MLP Pump
   1. Downloads
   2. Part Numbers




Electropumps for oil and grease

SEE NEW PRODUCT: BRAVO PUMP

Specifications:
- Input voltage: 12VDC - 24VDC - 110VAC - 220VAC /50Hz
- Working Temperature: - 30°C÷+ 80°C (- 22°F÷+176°F )
- Number of outlets: 1- 2 - 3
- Pumping element: Piston-type Ø 6 mm ( 0.2 in.) driven by cam
- Main piping inlet: Fast-lock for Ø 6 mm ( 0.2 in.) pipe
- Reservoir: 2, 4, 8 lt (0.44-0.88-1.76 gals) with MIN-MAX level indicator
- Mineral Lubricant: Grease MAX NLGI 2
- Reservoir refill system: Lubricator A/M10X1 UNI7663
- Air-bubbles discharge: Rotating cylinder and grease scraper
- Maximum pressure: 250 ± 50 bar ( 3675 ± 735 psi ) safety valve inside the pumping
unit
- Flowrate for each outlet: ~ 2.8 cm3/min (~ 0.17 cu.in.)




MLP is a piston pump driven by an eccentric cam which has been designed to operate
with a maximum of three pumping elements.
The housing is a compact monobloc plastic element shaped to offer a full resistance to
mechanical stresses.
A roller-shaped system and a grease-scraper enable to eliminate air bubbles from grease,
thus ensuring an easy operation, also at low temperatures.
The worm-gear ratiomotor with helical wheel and DC low voltage, is directly started by
the user or through the control timer setting.

The pump is available in three versions (12-24VDC e 110-220VAC), all provided with
the magnetic sensor for the minimum level:
- no TIMER
- with TIMER PAUSE-WORK
- with TIMER PAUSE-SENSOR




Downloads


To access the documentation download area, please sign in with the login box on the
top left of the page or register.


   Have a question about this item?




Refine your search
Family

                         All
                         Electric pumps
                         Serial 26 Progressive System

Actuation

                         Electric

Element Type

                         Pump
Hertz

               50 Hertz

Lubricant

               Grease

Output Min

               0-50 cmü (0-3,05 Cu. in.)

Output Type

               Fixed

Voltage Operating

               All
               230 V AC Single phase
               12DC
               24DC
               110 V AC Single phase

Operating Pressure

               400 Bar

Reservoir

               All
               3 Lt (0,79 gallons)
               6 Lt. (1,58 gallons)
               11 Lt (2,90 gallons)

Reservoir material

               Plastic

Working Temperature

               Extended -30 +80C (-22 +176F)

Grease Viscosity

               Max NGLI 2
Part numbers - Models found

                  Part
Availability                           Description             Price Buy
                Number
               0888300   GREASE E-PUMP 12V DC 2KG.
               0888301   GREASE E-PUMP 12V DC 4KG.
               0888302   GREASE E-PUMP 12V DC 8KG.
               0888303   GREASE E-PUMP 24V DC 2KG.
               0888304   GREASE E-PUMP 24V DC 4KG.
               0888305   GREASE E-PUMP 24V DC 8KG.
               0888306   GREASE E-PUMP 110V 2KG.
               0888307   GREASE E-PUMP 110V 4KG.
               0888308   GREASE E-PUMP 110V 8KG.
               0888309   GREASE E-PUMP 230V 2KG.
               0888310   GREASE E-PUMP 230V 4KG.
               0888311   GREASE E-PUMP 230V 8KG.
               0888312   GREASE E-PUMP 12V DC 2KG.WITH TIMER
               0888313   GREASE E-PUMP 12V DC 4KG.WITH TIMER
               0888314   GREASE E-PUMP 12V DC 8KG.WITH TIMER
               0888315   GREASE E-PUMP 24V DC 2KG.WITH TIMER
               0888316   GREASE E-PUMP 24V DC 4KG.WITH TIMER
               0888317   GREASE E-PUMP 24V DC 8KG.WITH TIMER
               0888318   GREASE E-PUMP 110V 2KG.WITHTIMER
               0888319   GREASE E-PUMP 110V 4KG.WITH TIMER
               0888320   GREASE E-PUMP 110V 8KG.WITH TIMER
               0888321   GREASE E-PUMP 230V 2KG.WITH TIMER
               0888322   GREASE E-PUMP 230V 4KG.WITH TIMER
               0888323   GREASE E-PUMP 230V 8KG.WITH TIMER
                         GREASE E-PUMP 12V DC 2KG.WITH TIMER
               0888324
                         PAUSE-SENSOR
                         GREASE E-PUMP 12V DC 4KG.WITH TIMER
               0888325
                         PAUSE-SENSOR
                         GREASE E-PUMP 12V DC 8KG.WITH TIMER
               0888326
                         PAUSE-SENSOR
                         GREASE E-PUMP 24V DC 2KG.WITH TIMER
               0888327
                         PAUSE-SENSOR
                         GREASE E-PUMP 24V DC 4KG.WITH TIMER
               0888328
                         PAUSE-SENSOR
                 Part
Availability                           Description             Price Buy
                Number
                         GREASE E-PUMP 24V DC 8KG.WITH TIMER
               0888329
                         PAUSE-SENSOR
                         GREASE E-PUMP 110V 2KG.WITH TIMER
               0888330
                         PAUSE-SENSOR
                         GREASE E-PUMP 110V 4KG.WITH TIMER
               0888331
                         PAUSE-SENSOR
                         GREASE E-PUMP 110V 8KG.WITH TIMER
               0888332
                         PAUSE-SENSOR
                         GREASE E-PUMP 230V 2KG.WITH TIMER
               0888333
                         PAUSE-SENSOR
                         GREASE E-PUMP 230V 4KG.WITH TIMER
               0888334
                         PAUSE-SENSOR
                         GREASE E-PUMP 230V 8KG.WITH TIMER
               0888335
                         PAUSE-SENSOR



Part numbers - Accessories found

Availability Part Number           Description          Price Buy
             0888356     KIT RESERVOIR 2KG FOR MLP PUMP
             0888357     KIT RESERVOIR 4KG FOR MLP PUMP
             0888358     KIT RESERVOIR 8KG FOR MLP PUMP



Pump Series 777000
   1. Downloads
   2. Part Numbers
Motorized pumps for Oil or Grease
VOIR NOUVEAU PRODUIT : POMPE SUMO

Key features
- Lubricant: Oil or Grease
- Maximum pressure 500 Bar (7250 psi.)
- Viscosity: Oil min 100ccSt; Grease max 265ASTM (NLGI 2)
- Pump: Double body type 4 pistons
- Reservoir capacity: 22,66 & 220lb
- Three phase motor: 220/380V 50/60HZ 4 poles.
                     1500 r.p.m. 0.37kW up +32°F, 0.75kW up to -86°F.
                  - Protection: IP44
                  - Reduction unit: 1:15 ratio
                  - Temperature range: Refer to moto type values

The Dropsa 777000 series modular motorized pump is suitable for a wide range of
applications. Once installed it is a simple operation to adjust the pressure and adjust
lubricant output (using a flow control).

The modular construction of the pump assembly uses common components throughout
the range and therefore reduces spares holding.
The double pump body has two outlets which can either be combined together for one
outlet or feed to two independent systems. In the case of a Dual Line System the two
pump outlets would operate an inverter.

Access to the pump is simple through the reservoir lid or through the covers surrounding
the pump and reduction unit. Re-filling of the reservoir is recommended through the
charging filter to eliminate any ingress of contaminates.
The frequency of operation can be monitored with Dropsa Control Panels or through the
machines P.C.
The pump has a standard kit identical to the other version Plus hoses, quick copulings and
shut-off valves.
TROLLEY VERSION
The pump has a standard kit identical to the version Plus hoses, quick coupling and shut-
off valves.

Overall Dimensions:
Height : 1017 mm
Width: 475 mm
Depth: 730 mm




Downloads


To access the documentation download area, please sign in with the login box on the
top left of the page or register.


   Have a question about this item?




Refine your search
Family

                         All
               Electric pumps
               Serial 26 Progressive System
               Dual Line System

Actuation

               Electric

Element Type

               Pump

Hertz

               All
               50 Hertz
               50/60 Hertz Dual frequency

Lubricant

               All
               Oil
               Grease

Output Min

               All
               201-1000 cmü (12,3-61 Cu.in.)
               51-200 cmü (3,11-12,20 Cu.in.

Output Type

               Fixed

Voltage Operating

               All
               230 V AC Single phase
               380-550 V AC Threephase

Operating Pressure

               All
               400 Bar
               >400 Bar (>5880 Psi)
Reservoir

                All
                11 Lt (2,90 gallons)
                >30 Lt (>7,92 gallons)
                30 Lt (7,92 gallons)

Working Temperature

                Normal -5 +40C (+23 +104F)

Grease Viscosity

                Max NGLI 2

Max. Oil Viscosity

                >460 cSt

Min. Oil Viscosity

                15 cSt

Part numbers - Models found

                    Part
Availability                                  Description     Price Buy
                  Number
                0777005      E-PUMP 10K ASSY
                0777010      E-PUMP 30K ASSY
                0777020      E-PUMP 100K ASSY
                0777040      E-PUMP 30KG ASSY
                0777060      E-PUMP 10K ASSY
                0777083      E-PUMP 100K ASSY
                0777207      E-PUMP 30KG MOTOR.0.75 KW
                             E-PUMP WITH MECH INVERTER100KG
                0777271
                             TANK
                0777273      E-PUMP KG.30 MOTOR 0.75 KW
                0777393      E-PUMP MECH. KG.10
                0777510      777 PUMP 10L ASSY
                0777521      777 PUMP 30L ASSY
                0777535      777 PUMP 100L ASSY
                   Part
Availability                           Description             Price Buy
                 Number
               0777560    777 PUMP 10L ASSY
               0777572    777 PUMP 30L ASSY
               0777584    777 PUMP 100L ASSY
               0777950    777 MOBILE PUMP 10K
               0777951    E-PUMP TROLLEY 30KG 3 PH
               0777952    MOBILE E-PUMP KG 10
               0777953    TROLLEY E-PUMP KG 30
               0777954    MOBILE E-PUMP KG 10 1PH
               0777955    E-PUMP WITH TROLLEY 30K SINGLE PH.
               0777959    E-PUMP TROLLEY HYDR REV. KG10
                          E-PUMP WITH TROLLEY HYDR.INVERTER
               0777961
                          KG30
               0777963    E-PUMP WITH TROLLEY 30K



Part numbers - Accessories found

Availability Part Number                   Description        Price Buy
                           INVERTITORE ELETTROMAGNETICO24 V
               0083400
                           DC
                           INVERTITORE ELETTROMAGNETICO110 V
               0083401
                           AC
                           INVERTITORE ELETTROMAGNETICO220 V
               0083402
                           AC
                           INVERTITORE ELETTROMAGNETICO380 V
               0083403
                           AC
               0083420     DIRECTIONAL MOD.VALVE 24V DC
                           DIRECTIONAL MODULAR VALVE 110V AC
               0083421
                           50/60HZ
               0083422     MODULAR VALVE 220V AC 50/60Hz
               0083423     Modular Valve 380V AC
               0083450     INVERTITORE PNEUMATICO 24 V CC
                           INVERTITORE PNEUMATICO24 V CA 50/
               0083451
                           60 Hz
                           INVERTITORE PNEUMATICO110 V CA 50/
               0083452
                           60 Hz
               0083453     INVERTITORE PNEUMATICO220 V AC 50/
Availability Part Number                  Description     Price Buy
                           60 Hz
           2036004         HYDRAULIC FITTING 1911-B1
           2036017         HYDRAULIC FITTING 1641-B
           2036400         EXSTENSION 6239
           2036401         FLEX EXTENSION B 6248-1
           2036403         PROL.RIGIDA INN.RAP. TESTINA
           2513005         FLEX 6X17 CM 200
           2513005
           200CM
           2513005
                           FLEX 6X17 CM 300
           300CM
           2513021         FLEX 6X17 CM
           2513021 1000
                           FLEX 6X17 L 1000 CM
           CM
           2513021 1500
                           FLEX 6X17 L 1500 CM
           CM
           2513021 500
                           FLEX 6X17 L 500 CM
           CM
           2513021 2000
                           FLEX 6X17 L 2000 CM
           CM
           2513021 600
                           FLEX 6X17 L 600 CM
           CM
           2513021 10
                           FLEX 6X17 L 10 MT
           MT
           2513021 100
                           FLEX 6X17 L 100 CM
           CM
           2513021
                           FLEX 6X17 L 1200 CM
           1200CM
           2513021 150
                           FLEX 6X17 L 150 CM
           CM
           2513021 300
                           FLEX 6X17 L 300 CM
           CM
           2513021 4 MT    FLEX 6X17 L 4 MT
           2513021 6 MT    FLEX 6X17 L 6 MT
           3352008         FLEX ASSY 13X23 CM
           3352008 100
                           FLEX 13X23 LUNGHEZZA 100 CM
           CM
           3352008 150
                           FLEX 13X23 LUNGH 150 CM
           CM
           3352008 200     FLEX 13X23 LUNGH. 200 CM
Availability Part Number                      Description   Price Buy
            CM
            3352008 500
                            FLEX 13X23 LUNGH. 500 CM
            CM
            3352008 300
                            FLEX 13X23 LUNGH. 300 CM
            CM
            3352008 600
                            FLEX 13X23 LUNGH. 600 CM
            CM
            3352008 50
                            FLEX 13X23 LUNGH. 50 CM
            CM
            3352008 80
                            FLEX 13X23 LUNGH. 80 CM
            CM



Pump Series 242000
   1. Downloads
   2. Part Numbers




Motorized pumps for Oil or Grease
SEE NEW PRODUCT : SUMO PUMP

Key features
- Operating pressure: up 15Mpa (150bar)
- Pump capacity: max 450 cm/min
-Tank capacity: 65 litres (oil), 65 kg (grease)
- Motor: 3ph:220/380V - 50Hz 1500 rpm- 0,75 kW
- Min. work time (sec) : 2a ( min pause time 96 sec.)
- Operatin temp: -5°C + 40°C
- Lubricant: Oil viscosity 100cSt min ; Grease NLGI 2
The 242 series lubrication pumps are particularly suited to the heavy industrial sector,
with its features of long life, safe and constant functioning and reduced maintenance
being indispensable for ensuring a perfect and efficient lubrication of machinery working
under heavy and demanding conditions, and in particular where continuous operating is
required to ensure a high level of production.

By selecting from a range of perfectly compatible and easily assembled components it is
possible to vary the pressure, the quantity of lubricant delivered, the type of lubricant or
the type of distribution.

The complete machine, mounted on a base, can be considered a true central lubrication
unit with its high performance permitting an extensive layout and a high number of
lubrication points.




Downloads


To access the documentation download area, please sign in with the login box on the
top left of the page or register.


   Have a question about this item?




Refine your search
Family

                         All
                         Electric pumps
                         Dual Line System

Actuation

                         Electric
Element Type

               Pump

Hertz

               50 Hertz

Lubricant

               All
               Grease
               Oil

Output Min

               All
               201-1000 cmü (12,3-61 Cu.in.)
               51-200 cmü (3,11-12,20 Cu.in.

Output Type

               Fixed

Voltage Operating

               380-550 V AC Threephase

Operating Pressure

               81 - 150 Bar (1190-2205 Psi)

Reservoir

               >30 Lt (>7,92 gallons)

Reservoir material

               Aluminium

Working Temperature

               Normal -5 +40C (+23 +104F)

Grease Viscosity
               Max NGLI 2

Max. Oil Viscosity

               >460 cSt

Min. Oil Viscosity

               15 cSt

Part numbers - Models found

Availability Part Number      Description      Price Buy
             0242501     E.PUMP 1/10 65 KG
             0242502     E.PUMP 1/20 65 KG
             0242503     E.PUMP 1/40 65 KG
             0242511     E.PUMP 1/10 65 KG
             0242512     E.PUMP 1/20 65 KG
             0242513     E.PUMP 1/40 65 KG
             0242521     E.PUMP 1/10 65 LT
             0242522     E.PUMP 1/20 65 LT
             0242523     E.PUMP 1/40 65 LT
             0242531     MOTOR/PUMP 1/10 65 LT
             0242532     MOTOR/PUMP 1/20 65 LT
             0242533     E.PUMP 1/40 65 LT



Part numbers - Accessories found

                 Part
Availability                            Description            Price Buy
                Number
                           INVERTITORE ELETTROMAGNETICO24 V
               0083400
                           DC
                           INVERTITORE ELETTROMAGNETICO110 V
               0083401
                           AC
                           INVERTITORE ELETTROMAGNETICO220 V
               0083402
                           AC
                           INVERTITORE ELETTROMAGNETICO380 V
               0083403
                           AC
                  Part
Availability                            Description               Price Buy
                 Number
               0083420    DIRECTIONAL MOD.VALVE 24V DC
                          DIRECTIONAL MODULAR VALVE 110V AC
               0083421
                          50/60HZ
               0083422    MODULAR VALVE 220V AC 50/60Hz
               0083423    Modular Valve 380V AC
               0083450    INVERTITORE PNEUMATICO 24 V CC
                          INVERTITORE PNEUMATICO24 V CA 50/ 60
               0083451
                          Hz
                          INVERTITORE PNEUMATICO110 V CA 50/ 60
               0083452
                          Hz
                          INVERTITORE PNEUMATICO220 V AC 50/ 60
               0083453
                          Hz
               0085180    REVERSING VALVE +++
               0242030    VALVE AND FILTER FOR GREASE
               0242045    VALVE AND FILTER FOR OIL
               0242050    PUMP GROUP
               0242142    UNIDIRECTIONAL COUPLING
               0242210    REDUCER 1/10
               0242220    REDUCER 1/20
               0242240    REDUCER 1/40



Pneumatically driven pump Series 233000
& 234000
   1. Downloads
   2. Part Numbers
For oil and grease for dual line systems

Specifications:
- Compression ratio: 40:1
- Command air pressure: minimum 4 bar (0.4 MPa) - maximum 10 bar (1 MPa) -
recommended 7 bar (0.7 MPa)
- Lubricant outlet : G 1/4 UNI-ISO 228/1 (1/4 Gas)
- Compressed air inlet: G 1/4 UNI-ISO 228/1 (1/4 Gas)
- Delivery flow rate: 400 gr. of grease/min with an air pressure of 10 bar




These powerful, robust and long lasting pumps, mounted on commercial drums, are used
for transferring light greases, lubricants and other non-corrosive fluids or, fitted with a
flexible hose and gun, for filling grease cups or small tanks in the industrial and
automotive fields.
Another interesting application of this type of pump is in the lubrication field where its
capacity to deliver large quantities at a high working pressure renders it particularly
suitable for feeding centralised progressive systems.

The pump is made up of a motor assembly with a synthetic rubber piston, particularly
resistant to abrasion, moved from top to bottom (and vice-versa) by a compressed air jet,
and a pump rod with a chromed piston, connected to the motor piston.
The lubricant is primed on the upstroke of the piston filling the lower chamber of the
pump rod or the priming chamber and from here, through a non-return valve, passes to
the upper chamber (high pressure chamber).
In the successive downstroke phase, the piston forces this quantity of lubricant through
the pump outlet and, simultaneously, refills the priming chamber so repeating the cycle.

The following accessories can be supplied on request:

Pressure disk - to be used when the pump is mounted directly on a commercial grease
drum. This disk acts to maintain the grease compact and to avoid the formation of air
bubbles in the feed line so prejudicing the the functioning of the system.

Lid - made for mounting this type of pump, substituting the original drum lid.

Suction filter - to be mounted on the pump dip tube as the lubricants supplied in
commercial drums are not always free from impurities.

The versions for double lines are complete with a tank of 5 Kg/lt. In sheet steel, minimum
level electrical contact, filling valve, hydraulic inverter and pressure gauge; these are
suitable for the lubrication of small to medium sized machinery.
Downloads


To access the documentation download area, please sign in with the login box on the
top left of the page or register.


  Have a question about this item?




Refine your search
Family

                        All
                        Pump
                        Pneumatic pumps

Lubricant

                        All
                        Grease
                        Oil 1500 cSt
                        Grease NLGI 1

Output Max

                        400 gr

Weight

                        All
                        7 Kg
                        5,5kg
                        18,5 Kg
                        23 kg
                        18,3 Kg
                        7,5 kg
                        6 Kg
                        9Kg
               21 kg
               35 Kg

Dimensions l x p x h

               All
               580 x 240 x 200 mm
               530 x 215 x 200 mm

Dosing system

               All
               02
               26

Compressed air inlet

               1/4 Gas

Compression ratio

               40 : 1

For drums

               All
               20 Kg
               20 Fornito
               5 fornito
               56 Kg
               5 Kg
               180 Kg

Lubricant output

               1/4 Gas

Pressure control max

               10 Bar

Pressure control min

               4 Bar

Part numbers - Models found
Availability Part Number        Description     Price Buy
             0233250     PNEU PUMP NO G/L/LV.SW
             0233300     PNEU PUMP 45-1 KG 5
             0233305     PNEU PUMP G/L/LV.SW
             0233310     PNEU PUMP 45-1KG 5
             0233330     PNEU PUMP 40/1 5 LT
             0234000     PNEU PUMP 45/1 5 KG
             0234125     PNEU PUMP 45:1 20 KG
             0234126     PNEU PUMP 40-1 180 KG
             0234150     PNEUMATIC PUMP 20 KG
             0234200     PNEU PUMP 45/1 56 KG
             0234250     PNEU PUMP R45/1 180 KG
             0254500     PNEU PUMP 45/1 20 KG



Part numbers - Accessories found

Availability     Part Number              Description        Price Buy
               0101100         FLEX 6X14 CM
               0101100 CM 100 FLEX 6X14 CM 100 L
               0101100 CM 200 FLEX 6X14 CM 200 L
               0101100 CM 300 FLEX 6X14 CM 300 L
               0101100 CM 1000 FLEX 6X14 CM 1000 L
               0101100 CM 30 FLEX 6X14 CM 30 L
               0234063         SUCTION FILTER FOR PNEU. PUMP
               1151000         GUN WITH CONTROL VALVE 6320-3
               2037659         ROTARY CONN B52752 + 43760
               2513006         NIPPLE

				
DOCUMENT INFO