MV Catalog DESIGN SPREADS.qxd by pengtt

VIEWS: 237 PAGES: 28

									INDUSTRIAL QUALITY CLEANING EQUIPMENT


                      High Pressure Washers and Accessory Tools

                                     Air and Electric Tube Cleaners
                            Flexible Shafts and Condenser Brushes

           Tube Tools for Heat Exchangers, Condensers and Chillers

                   Line Cleaning Pumps For Draught Beer Systems

                                            Vapor/Steam Cleaners

                                                    Water Brooms
TABLE OF CONTENTS
PRESSURE WASHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7
   • A/C Coil Scrubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
   • Economy Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
   • Heavy Duty Electric Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
   • Heavy Duty Gasoline Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

ACCESSORIES FOR PRESSURE WASHERS . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
   • A/C Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
   • Flexible Wand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 8
   • Rotating Brush Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
   • Telescoping Spray Lance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
   • Hose Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
   • Cart for Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
   • Turbo Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

WATER BROOMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

LINE CLEANING PUMPS FOR DRAUGHT BEER SYSTEMS . . . . . . . . . . . .10

VAPOR STEAM CLEANERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12

TUBE CLEANING SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-20
   • Air Powered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
   • Electric Powered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-16
   • Shafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-18
   • Custom Length Shafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
   • Shaft Lubricators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
   • Brush and Coupling Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-20

TUBE PLUGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

TUBE TOOLS FOR HEAT EXCHANGERS, CONDENSERS, CHILLERS . . . .21-25
   • Vacuum Leak Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
   • Tube Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
   • Manual Tube Puller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
   • Tube Expanders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25

TECHNICAL SUPPORT & SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

TERMS AND CONDITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26




                                                              –1–
 CS250 MINI MAX A.C. COIL SCRUBBER




At last! Maxi-Vac offers a machine specifically designed for                         SPECIFICATIONS
coil cleaning. Sufficient pressure to clean most coil beds,
light weight and small enough to carry up ladders. Plug in                 MODEL                              CS250
anywhere – ONLY 2 AMPS!                                                    Motor*               .2 HP, 1725 RPM, 115VAC 60 Hz

Plus, the pump is compatible with the broad range of coil                  PSI                                250 PSI

cleaning solutions used today!                                             GPM                                  1.0
                                                                           Hose                            15' x 1/4" I.D.
FEATURES:                                                                  Case                    Steel Case Powder Coated
• Direct drive plunger pump with Viton seals, stainless steel plunger,     Dimensions                    12" x 14" x 5" High
  nylon body. Extremely resistant to coil cleaning solutions.
                                                                           Gun                          Trigger Gun w/Safety
• All steel, powder coated case.
• Siphon premixed solutions (Kit 250-60 Sold Separately).                  Pump                         Direct Drive Plunger

• Recessed UL approved male power receptacle.                              Wand                          18" Stainless Steel
• Accepts flexible wand shown below.                                       Nozzle                             20° fixed
• Only 18lbs                                                               Weight                              18 lbs.
• Only 2 AMPS                                                            * 230 Volt 50/60Hz Available



 FLEX WAND

                                                                                             Bend this 18" flexible wand
                                                                                             into almost any position to
                                                                                             clean hard to reach
                                                                                             surfaces and coils. The
                                                                                             trigger gun quick couples to
                                                                                             pressure hose. Trigger gun
                                                                                             is included. To select the
                                                                                             proper Flex Wand to match
                                                                                             a Maxi-Vac pressure
                                                                                             washer, see page 8.



                                                                   –2–
                            ECONOMY PRESSURE WASHERS
 MODELS P1100 AND P1250 WITH TOTAL STOP!
     • Italian made, economically priced, electric pressure washers designed
       for intermittent duty applications.
     • TSS — Both units are equipped with a patented system which shuts the
                 motor down when the trigger is released. This prevents over
                 heating of pump, extends pump/valve life.
     • Chemicals are applied by means of a chemical applicator which couples
       directly to the trigger gun/lance. No harmful chemicals go through the pump.
     • Will siphon water from a container.
     • A/C Cleaning Kits are available to lower output pressure, shorten
       gun/lance length, and provide siphon hose – page 8.
     For heavy-duty machines, see pages 5-8.

 P1100 — WITH TOTAL STOP SYSTEM (TSS)
                                                                 FEATURES:
                                                                 • 115 VAC, 12 AMPS, 60 HZ
                                                                 • 25 Ft. Pressure Hose with Quick Couple
                                                                 • 35 Ft. Power Cord with GFCI Plug
                                                                 • Trigger Gun/Quick Couple Nozzle 26"
                                                                 • Chemical Applicator
                                                                 • 29# Net Weight: 11"H x 7"W x 13"L
                                                                 • Unit will siphon from bucket. See page 8
                                                                   for A/C Cleaning Kit
                                             • 1100 PSI          • Cart - page 9
                                             • 1.6 G.P.M.




 P1250 — WITH TOTAL STOP SYSTEM (TSS)

FEATURES:
• 115 VAC, 14.5 AMPS, 60 HZ
• 25 Ft. Pressure Hose with Quick Couple
• 35 Ft. Power Cord with GFCI Plug
• Trigger Gun/Quick Couple Nozzle 33"
• Chemical Applicator
• 35# Net Weight: 24"H x 14"W x 16"L
• Unit will siphon from bucket. See page 8
  for A/C Cleaning Kit                                      • 1250 PSI
                                                            • 1.5 G.P.M.



                                              –3–
 MODELS JS400 & 5000B
Compact, lightweight pressure washers, ideal for limited duty applications such as
cleaning air conditioning coils, vents, hoods, and other items where higher pressure and
water flow is not desired. Soaps/chemicals applied at hi-pressure thru a suction hose and
thru the pump. This means soap—or cleaner—must be premixed and drawn from a
bucket. The unit will not mix soap and water. Strong acid and caustic cleaners can
damage the pump. American made.


 MODEL JS400
                                                              SPECIFICATIONS
                                                     MODEL                               JS400
                                                     Motor*              1/3 HP, 1725 RPM, 115VAC 60 Hz
                                                     PSI                                 400 PSI
                                                     GPM                                   1.0
                                                     Hose                             15' x 1/4" I.D.
                                                     Case                    Steel Case Powder Coated
                                                     Dimensions                  9" x 10" x 15" Long
                                                     Gun                        Trigger Gun w/Safety
                                                     Pump                       Direct Drive Plunger
FEATURES:                                            Wand                                  18"
• Direct Drive Pump                                  Nozzle                             20° fixed
• Rugged all Steel Case - Powder Coated -
  NO PLASTIC PARTS                                   Weight                              43 lbs.
• Siphon Premixed Soaps at Full Pressure           * 220 Volt 50Hz Motors Available
• Trigger Gun for Easy Operation
• Recessed Male Power Receptacle
• Adjustable Angle Nozzle Available
• Cart - page 9
• Accepts Flexible Wand - page 8



 MODEL 5000B
                                                              SPECIFICATIONS
                                                     MODEL                               5000B
                                                     Motor            3/4 HP, 1725 RPM, TEFC 115/208-230V, 60 Hz*

                                                     PSI                                   500
                                                     GPM                                   2.0
                                                     Hose                             15' x 1/4" I.D.
                                                     Case              Steel Base and Handle Powder Coated
                                                     Dimensions                 10" x 14" x 22" Long
                                                     Gun
FEATURES:                                                                       Trigger Gun w/Safety

• Siphon Premixed Soaps at Full Pressure
                                                     Pump                       Twin Piston Cast Iron

• Trigger Gun for Easy Operation                     Wand                                  18"

• Adjustable Angle Nozzle Available                  Nozzle                             20° fixed

• Four Casters Available (not shown)                 Weight                              64 lbs.
                                                     Service Cord               35 ft. w / GFCI Plug
                                                   *50 Hz Motors Available

                                            –4–
 MODELS JS700I, 1300I, 1500I, JS2200I, JS3000I
These larger units have many special features that make them ideal for
commercial/industrial applications with maximum flexibility.

Pressure Regulating/Unloader Valves: This Feature allows the          chemicals pass through the pump - lengthening pump life. The
operator to select the desired operating pressure from 0 to the       Injector is adjustable so that the ratio of soap to water can be
maximum designed pressure for the unit by simply turning a            changed from “0” to about a 10% soap mix, depending on the
knob on the machine. Higher pressures for stubborn/heavier            viscosity of the soap/chemical.
tasks - lower pressures for more delicate tasks. These “Unloader
Valves” also reduce unnecessary wear on the motor and pump.           Adjustable Nozzles: All models are equipped with a “Hi-Lo”
When the trigger is released and no water is spraying, the            Nozzle which offers maximum versatility in that the operator can
valves, “unload” the pressure in the pump to “0”. This reduces        apply cleaners at low pressure - or - rinse at high pressure, by a
wear on the system and lengthens pump and motor life.                 simple push-pull adjustment on the nozzle. Also, by rotating the
                                                                      barrel of the nozzle, the spray pattern can be changed from 0°
Soap/Chemical Application. All models include an Injector to          (for maximum penetration and power) to any desired fan
allow controlled measured application of soaps or chemicals.          shaped pattern.
Controlled by a simple push-pull motion on the barrel of the
nozzle, pressure is changed from low to high. At low pressure,        Rugged Construction: All fittings are brass. All housing
soap can be applied with the water - allowing the soap or             components are heavy gauge steel, phosphate treated to reduce
chemical to stay on the surface and do its job. At high pressure,     rust, powder coated, and baked at 400° F for maximum durability.
only clear water is being sprayed to rinse and clean. Since the       All parts are field repairable/replaceable. Model 1300I has a high
Injector is located on the “High-Pressure” side of the pump, no       impact plastic housing.




 MODEL JS 700I
                                                                              • Cleaning floors, Walls, Machinery,
                                                                                Playground Equipment, Air
                                                                                Conditioning Coils, Vents/Hoods

                                                                              • Lightweight for Maximum Portability
                                                                                and Flexibility



                                                                                          SPECIFICATIONS
                                                                                 MODEL                                I
                                                                                                                 JS700I
                                                                                 Motor               3/4 HP, 1725 RPM, 115VAC 60 Hz
                                                                                 PSI                       Adjustable to 700 PSI
FEATURES:                                                                        GPM                                1.5
• Variable Pressure 0 - 700 PSI
                                                                                 Hose                          15' x 1/4" I.D.
• Adjustable Angle Nozzle from 0° to wide fan
                                                                                 Case                   Steel Case Powder Coated
• Adjustable Chemical Injector allows soaps or
  chemicals to be applied at low pressure                                        Dimensions                 9" x 10" x 15" Long

• Chemicals do not pass through pump,                                            Gun                       Trigger Gun w/Safety
  lengthens pump life                                                            Pump                       Direct Drive Plunger
• Rugged Steel Case - Powder Coated - No                                         Wand                          24" Insulated
  Plastic Parts
                                                                                 Nozzle                   Hi-Lo - Adjustable Angle
• Recessed Male Power Receptacle
                                                                                 Weight                           50 lbs.
• Accepts Flex Wand - page 8
• Cart - page 9


                                                                    –5–
 MODEL 1300I*
                                                        • Service Stations, Garages, Hotels, Motels
                                                          Pools, Playgrounds, Restaurants, Fast
                                                          Food Stores, Industry, Farms

                                                        • Anywhere requiring a heavy duty
                                                          hi-pressure, portable, electric cleaning
                                                          system!

                                                                    SPECIFICATIONS
                                                          MODEL                                I
                                                                                           1300I
                                                          Motor               2.0 HP, 120 VAC, 19 Amps, 60 Hz
                                                          PSI                        Adjustable to 1300
FEATURES:                                                 GPM                                2.1
• Variable Pressure 0 - 1300 PSI                          Hose                          25' X 3/8" I.D.
• Adjustable Angle Nozzle from 0° to Wide Angle           Dimensions                  9" x 9" x 14" Long
• Chemical Injector allows soaps and chemicals            Gun                       Trigger Gun w/Safety
  to be applied at low pressure
                                                          Pump              3 Plunger-Oil Bath Aluminum Manifold
• Chemicals do not pass through pump -
  Extending Pump Life                                     Wand                        Quick Couple 28"

• Accessory Tools - page 8 & 9                            Nozzle                   Hi-Lo Adjustable Angle

• Cart - page 9                                           Weight                           60 lbs.
                                                          Service Cord               35 ft. w / GFCI Plug
                                                        *Made in Italy



 MODEL 1500I
                                                        • Factories, Garages, Farms,
                                                          Campgrounds, Pools, Resorts, Hotels,
                                                          Motels, Restaurants

                                                        • All Applications that require a heavy
                                                          duty, portable, electric cleaning system


                                                                    SPECIFICATIONS
                                                          MODEL                                I
                                                                                           1500I
                                                          Motor            2.0 HP, 3450 RPM, 60Hz, 115/208-230 VAC*

                                                          PSI                      Adjustable to 1500 PSI
                                                          GPM                                2.1
FEATURES:                                                 Hose                          25' x 3/8" I.D.
• Variable Pressure 0 - 1500 PSI                          Base                      Steel with 10" Wheels
• Adjustable Angle Nozzle from 0° to Wide Angle           Dimensions                 28"L x 20"W x 25"'H
• Chemical Injector allows soaps and chemicals            Gun                       Trigger Gun w/Safety
  to be applied at low pressure
                                                          Pump                       3 Plunger-Oil Bath
• Chemicals do not pass through pump -
  Extending pump life                                     Wand                        Quick Couple 28"

• Accessory Tools - page 8 & 9                            Nozzle                   Hi-Lo; Adjustable Angle
                                                          Weight                           81 lbs.
                                                          Service Cord               35 ft. w / GFCI Plug
                                                        *50 Hz Motors Available



                                                  –6–
    HEAVY DUTY GASOLINE ENGINE PRESSURE WASHERS
 MODELS JS2200I and JS3000I

FEATURES:                                                               IDEAL FOR USE IN:
• Variable Pressure 0 to 2200 PSI,                                      •   Factories, Garages, Farms, Campgrounds,
  and 0 to 3000 PSI
                                                                            Pools, Resorts, Hotels, Motels,
• Adjustable Angle Nozzle 0° to Wide Angle                                  Restaurants
• Adjustable Chemical Injector allows soaps                             •   All Applications that Require A Heavy Duty
  and chemicals to be applied at low pressure
                                                                            Gasoline Engine Cleaning System
• Chemicals do not pass through pump -
  Extending Pump Life

• Accessory Tools - page 8 & 9

• Rugged Steel frame with 10" wheels

• Oil alert will shut down engine automatically
  and prevent damage if oil is below safe level.




                                                                  SPECIFICATIONS
  MODEL                                                  I
                                                   JS2200I                                           I
                                                                                               JS3000I
  Engine                                  6 HP OHV Vanguard *                            11 HP OHV Vanguard *
  PSI                                        Adjustable to 2200                            Adjustable to 3000
  GPM                                                3.0                                           4.0
  Hose                                          25' x 3/8" I.D.                              25' x 3/8" I.D.
  Base                                     Steel with 10" Wheels                         Steel with 10" Wheels
  Dimensions                               38" L x 18" W x 30" H                         38" L x 18" W x 30" H
  Gun                                      Trigger Gun w/Safety                           Trigger Gun w/Safety
  Pump                               3 Plunger-Oil Bath Brass Manifold              3 Plunger-Oil Bath Brass Manifold
  Wand                                       Quick Couple 28"                              Quick Couple 28"
  Nozzle                                  Hi-Lo; Adjustable Angle                        Hi-Lo; Adjustable Angle
  Weight                                           115 lbs.                                     137 lbs.
                                                                                                * 2 Year warranty on Engine




                                                                  –7–
                        PRESSURE WASHER ACCESSORIES
 A/C COIL CLEANING KIT — #AC100

                                                           The A/C Coil Cleaning Kit is specifically designed for cleaning air
                                                           conditioning coils. The Kit includes a 25 ft. pressure hose with a trigger
                                                           gun and nozzle to yield 600 PSI of pressure (safe for coil cleaning)
                                                           and a 6 ft. siphon hose for inlet water.


                                                           Adapts to Models P1100 and P1250.




 FLEXIBLE WAND ASSEMBLY
• Select Flex Wand number to correspond with Maxi-Vac
  pressure washer model number.
• The Flex Wand trigger gun is equipped with a 1/4" quick
  disconnect nipple to snap on/off pressure hose. Use Maxi-Vac
  quick disconnect number 5020 to equip existing
  gun/wand/hose assemblies with the quick disconnect feature.
• The operating pressure of the JS700I lowers to 400PSI when
  used with Flex Wand.
                                                                                  Flex Wand No.     Use With
• The operating pressure of the P1100 lowers to 600PSI when                       FW250             CS250, JS400, P1100, JS650
  used with Flex Wand.                                                            FW700             JS700I



 ROTATING BRUSH KIT                                                    HOSE ASSEMBLY
                          Rotating Brush Kit                                                           • 3000 PSI Max.
                          Part # 11000                                                                 • 250°F, (275°F intermittent)
                          Large (6") brush head rotates on                                             • 3/8" solid x 3/8" swivel
                          the end of a 14" arm to agitate
                          stubborn stains and dirt. Will func-
                          tion with cleaners injected through                                             Fits Maxi-Vac Models1500I,
                          the machine. The brush arm has                                                  P2000I, JS2200I, JS3000I
                          a quick connect coupling to MAXI-
                          VAC Models: P1100, P1250,
                                                                                              Part #         Description
                          1300I, 1500I, P2000I, JS2200I
                                                                                              15016 - 25     Hose Ass’y Black, 25'
                                                                                              15016 - 50     Hose Ass’y Black, 50'
                                                                                              15016 - 100    Hose Ass’y Black, 100'


 TELESCOPING SPRAY LANCES
                                                                        Part #         Description
                                                                        11024 -   12   Telescoping Wand, 12-foot
                                                                        11024 -   18   Telescoping Wand, 18-foot
                                                                        11024 -   24   Telescoping Wand, 24-foot
                                                                        11024 -   SB   Telescoping Wand Support Belt (Not Shown)

                              Heavy Duty Black Fiberglass
                                                                        To obtain proper nozzle, specify model pressure washer to
                              3000 PSI Max Pressure
                                                                        be used with telescoping lance.


                                                                 –8–
 CART FOR PRESSURE WASHERS
                                                          Part # CT100
                                                          Welded steel, powder coated cart with two 8" solid
                                                          rubber wheels. Designed to accept Maxi-Vac
                                                          Pressure Washers P1000, P1100, JS400, JS700I,
                                                          1300I.

                                                          15 lbs., 18" W x 12" D x 33" H.

                                                          Assembly required.

                                                          Shown with 1300I Hi-Pressure Washer




 WATER BROOMS                                                    TURBO NOZZLES
                                                                                    Turbo Nozzle
HEAVY DUTY ALL STEEL WATER BROOM                                                    Doubles the cleaning power of Jet
                                                                                    Streamer Pressure Washers over
Attach broom to garden hose and water sweeps dirt
                                                                                    1000PSI. A rotating nozzle on a 14"
away. Broom has brass water jets, 3/4" garden hose
connection, brass ball valve with lever handle to                                   quick disconnect lance. Converts 0°
control flow, and 2" swivel casters with rubber wheels.                             maximum blasting penetration to a 25°
                                                                                    spinning action to cut through the
                                                                                    toughest grime.
36" wide, 49" handle, 7 nozzles.
                                                                                    Part # 11020 fits models P1100, P1250
PART # WB360
                                                                                    Part # 11021 fits models 1300I, 1500I,
                                                                                                 P2000I, JS2200I
24" wide, 49" handle, 5 nozzles.                                                    Part # 11022 fits JS3000I

PART # WB240




                                                          –9–
 LINE CLEANING PUMPS

FOR DRAUGHT BEER DISPENSING SYSTEMS
• Specifically designed for use in cleaning draught beer
  dispensing systems and assisting in preventing the build up of
  bacteria, mold, and beerstone from line surfaces.
• Also ideal for cleaning soft drink dispensing systems, and other
  applications requiring the recirculation of liquids at low pressure.




 MODEL JS300 Medium Duty
• Designed for use on direct draw and short run systems.

• Self priming duplex diaphragm pump may be run dry
  indefinitely without damage to pump.

• Internal recirculating by-pass protects system from
  excess pressure.

• Pump wetted parts resistant to acid based cleaners.

• Siphons premixed cleaners from pail and recirculates.

• Unit is enclosed in powder coated steel housing for
  rugged dependability and safety.

• Only 16 pounds: 1.5GPM Max Flow Rate

• 115 Volts, A. C. 50/60HZ; 0.50 Amps


 MODEL JS350 Heavy Duty
• Designed for use with larger systems, longer runs, including
  stadiums, auditoriums, tracks, etc.

• Direct drive, positive displacement pump gives constant flow
  thru longer lines.–Internal by-pass allows volume control by
  operator.

• Pulsation action adds “scrubbing” motion and aids in cleaning.

• Special brackets on handle and frame allow for quick and
  secure storage of cord and hoses.

• Siphons premixed cleaner from pail and recirculates.

• Totally enclosed motor for maximum safety.

• Powder coated all steel frame.

• Only 30 pounds; 1.7GPM Max Flow Rate

• 115 Volts AC 60HZ; 5.3 Amps

                                                          –10–
 VAPOR STEAM CLEANER VS125
                   CLEANS – DEGREASES – SANITIZES
• This cleaning method utilizes
  extremely high temperature (240°-
  270°F) water vapor, under
  regulated pressure, to clean almost
  any surface—quickly and easily!
• Vapor is comprised of smaller water
  droplets than steam. Thus, vapor
  can penetrate tiny cracks even
  steam cannot reach.
• Uses ordinary tapwater.
• No toxic chemicals or additives.
• 100% environmentally safe!

Cleans and Sanitizes:
• Refrigeration Coils
• Coolers & Dairy Cases
• Wash Rooms
• Appliances – Ranges, Ovens, Refrigerators
• Vents/Hoods/Filters
• Beds/Chairs/Carts
• Kills Drainfly Larvae

Specifications:
• Max Pressure: 65 PSI
• Max. Temperatures 270° F
• Size 11" W x 18" D x 12" H
• Weight: 31 lb. (filled)

Features:
• Self contained 1 gallon boiler—no need for a water supply.
• Operates up to 2 hours on one fill up of water.
• Uses approximately 1 oz of water per minute—depending on pressure—no mess to clean up!
• Sanitizes and melts greasy dirt with 270° F of steam.
• Heavy duty stainless steel enclosure with convenient roll-about design.

Safety Features:
• Low water indicator lamp
• High temperature limit switch
• Pressure relief valve for high pressure
• Wand switch to control steam
• Pressure regulator to control steam pressure


                                                 –11–
    STANDARD ACCESSORIES FOR VS125
The machine comes standard with the following tools:

•   Detachable 6 foot steam hose with spray gun         •   One medium round nylon brush (3" diameter)
•   Two wand extensions (20" long)                      •   One triangle nylon brush (3" diameter)
•   One wand extension (10" long)                       •   One 5" long nylon brush
•   Detail brush attachment                             •   One window cleaning squeegee
•   Five nylon detail brushes (1" diameter)             •   One large nylon carpet/floor attachment
•   Five stainless steel detail brushes (1" diameter)   •   One storage/carry bag




                                                                               VS125-50 3"
                                                                               Triangle Nylon Brush




        VS125-15 20" Wand Extension
        VS125-20 10" Wand Extension
                                                                                  MV125-55 5" Long
                                                                                  Nylon Brush


                            VS125-25 Detail
                            Brush Attachment




                                                                               MV125-60 Window
             VS125-30 1" Nylon Detail Brush                                    Cleaning Squeegee
             VS125-35 1" Steel Detail Brush
             VS125-40 1" Brass Detail Brush
             (Packed 12 Each)




                         VS125-45 3" Round
                         Nylon Brush

                                                            VS125-65 Nylon Carpet/Floor Attachment


                                                    –12–
AIR POWERED TUBE CLEANER




                                                                              Features:
JM1700 Air Powered Tube                                                       • Air Powered
Cleaner With Foot Control*                                                    • Shock Resistant
                                                                              • Compact and Lightweight
This compact tube cleaner is designed for                                     • Water Flush To Remove Deposits
cleaning applications where the use of electricity                            • Speed and Torque Controls
is not available; or, may not be desirable. The                               • Air Powered Foot Switch for
machine offers variable torque and variable                                     Hands Free Operation
                                                                              • Flexible Shaft and Tools Are
speed to match cleaning requirements.
                                                                                Interchangeable With Other Machines

                                             SPECIFICATIONS
         MODEL                                                                       JM1700
         Flexible Shaft Speed                                     Variable to 3000 RPM—Use 1900 Series Shaft
         Motor Power                                          Up to 1 1/2 HP Depending On Air Pressure and Volume
         Air Requirements                                   Minimum 60 PSI at 15 CFM, Maximum 100 PSI at 70 CFM
         Input Water                                                               Garden Hose
         Unit Dimensions                                                       9" W x 10" H x 15" L
         Unit Weight (Excludes Shafts)                                                27 lbs.
         Overall Shipping Dimensions                                           12" W x 23" H x 11" L
         Overall Shipping Weight (Excludes Shafts)                                    30 lbs.

                        * Shafts and brushes sold separately. Use 1900 series shafts shown on page 16-17.



                                                             –13–
    ELECTRIC TUBE CLEANING SYSTEMS
RECOMMENDED FOR:
•   Heat Exchangers
•   Condensers
•   Evaporators
•   Absorption Machines
•   Chillers




The Maxi-Vac Jet Mate makes tube cleaning a safe, simple, one man job. While a tool rotates through
the tube, driven by a flexible shaft, water assists by flushing out loosened deposits. Tubes are left clean
and free of energy robbing build-ups of scale, algae, mud, etc.



    HOW IT WORKS
The Jet Mate Tube Cleaner was designed with a flexible shaft which rotates at
speeds from 0 to 1800 RPM inside a watertight nylon casing. As the shaft is fed into
the tube being cleaned, water from a garden hose is carried thru the machine to the
brush or cutting tool. The brush or cutting tool loosens deposits in the tube and
water assists in flushing deposits out the end of the tube. Operation of the machine
is controlled by an air actuated foot switch. Step on the switch - the shaft rotates
and water flows thru the casing. Lift the foot off the switch - the shaft immediately
stops rotating and water stops flowing. Thus - the machine operates and water
flows only when the operator deliberately depresses the foot switch!



    WILL NOT DAMAGE TUBES
The brush or cutting tool can be fed through the tube - unaffected by
slight sagging of the tube. Properly sized and selected brushes and
tools will not cut into the tube wall, nor get stuck.



    CONSTANT TORQUE • VARIABLE SPEED • INCREASED SAFETY

Maxi-Vac has carefully designed the Jet Mate Tube                   speeds from near 0 to 1800 RPM with constant torque.
Cleaner with operator safety and equipment reliability in           Thus, the operator can handle the shaft and tools at a
mind. The unit is powered by a D.C. (Permanent Magnet)              safe comfortable speed for the condition of the tube
motor. The motor is combined with a solid state speed con-          being cleaned. This feature cannot be offered on units
trol. This combination allows the operator to select rotational     with A.C. motors and constant high RPM’s.


                                                             –14–
 FIVE ELECTRIC POWERED MODELS AVAILABLE
The following models incorporate Maxi-Vac’s very popular “quick disconnect” flexible shaft coupler. This
coupler provides for a quick, positive connection everytime! There are no loose coupling nuts or O-rings to
become damaged or lost! Use Maxi-Vax 1800 series flexible shafts with these units.

 JM1200           Tube Cleaner — Constant Speed w/Foot Control
                  Designed for applications where variable speed and/or reverse rotation is not desired
                  or budget restraints demand a more economical unit.

 JM1800           Tube Cleaner — Variable Speed w/Foot Control
                  Maxi-Vac has carefully designed the JM1800 with operator safety and equipment
                  reliability in mind. The unit is powered by a D.C. (Permanent Magnet) motor, combined
                  with a solid state speed control. This allows the operator to select rotational speeds
                  from 0 to 1800 RPM with constant torque. Thus, the operator can handle the shaft and
                  tools at a safe comfortable speed for the condition of the tubes being cleaned. This
                  feature cannot be offered on units with A.C. motors and constant high RPM’s.

 JM1800 R Tube Cleaner — Variable Speed & Reversible w/Reversible Foot Control
                  CLEANING INTERNALLY ENHANCED TUBES is made easier by
                  this machine. The JM1800 R incorporates all the features of the
                  JM1800 plus a reversible rotating shaft and two direction foot
                  switch to permit clockwise rotation entering tubes and counter
                  clockwise rotation for exiting.


 TUBE CLEANERS WITH UNIVERSAL SHAFT COUPLERS
Maxi-Vac offers our variable speed and variable speed reversible Tube Cleaners with a shaft coupler
designed to accept flexible shafts of the style offered by Goodway Tool, and others. These machines were
added to Maxi-Vac’s line to accommodate users who prefer Maxi-Vac’s constant torque/variable speed
features; yet, may have existing machines and/or flexible shafts produced by one of the other manufactur-
ers, and do not wish to mix styles, or obsolete their existing shafts. Use Maxi-Vac 1900 series flexible
shafts with these units.

  JM1900          Tube Cleaner — Variable Speed with Universal Coupler*
                  and Foot Control
 JM1900 R Tube Cleaner — Variable Speed & Reversible with
          Universal Coupler* and Reversible Foot Control
*The Universal Coupler has a 2" Locking Nut and .400" Drive Coupler.



 AIR POWERED TUBE CLEANERS — SEE PAGE 13
                                                                –15–
 SPECIFICATIONS FOR ELECTRIC TUBE CLEANERS*
                                                                                                                JM1800, JM1800R
                                                                        JM1200                                  JM1900 & JM1900R
           Flexible Shaft Speed                                         1140 RPM                                0 - 1800 RPM
           Motor Power**                                                1/3 HP, 8 Amps                          1/2 HP, 6 Amps - Rectified D.C. Motor
           (50 Hz Motors Available)                                     60 Hz, 115 Volts                        60 Hz, 115 Volts***
           Input Water                                                  Garden Hose                             Garden Hose
           Unit Dimensions                                              11"W x 17"L x 9"H                       11"W x 17"L x 9"H
           Unit Weight (Excludes Shafts)                                40 lbs.                                 40 lbs.
           Overall Shipping Dimensions                                  12"W x 23"L x 11"H                      12"W x 23"L x 11"H
           Overall Shipping Weight (Excludes Shafts)                    44 lbs.                                 JM 1800 & JM 1900 = 50 lbs.
                                                                                                                JM 1800R & JM 1900R = 50 lbs.
             * Not intended for use on curved or bent tubes
            ** Equipped with recessed male power receptacle
           *** These units available in 220 Volt 50/60 Hz


Note: flexible shafts, brushes and/or tools required to complete the Jet Mate Tube Cleaning System are sold sep-
arately. Please see below to select the proper components.


 SHAFTS AND ACCESSORIES
Flexible Shafts with Nylon Casing
When ordering flexible shafts and tools, note that each shaft is designed for a specific model(s) of tube cleaner(s); also,
each is designed for use with a particular range of brush and tool sizes—in a particular range of tube or pipe sizes. The
proper selection of shaft and tool is essential for successful cleaning.
When ordering flexible shafts, you must determine the diameter of the tube or pipe and the longest length to be cleaned.

           Shaft Part No.**                                  Overall Dia.                        Core Dia.                       Thread-Tool End
           15XX - 1/4                                              1/4"                              1/8"                        8/32 Female
           18XX - 1/4                                              1/4"                              1/8"                        8/32 Female
           19XX - 1/4                                              1/4"                              1/8"                        8/32 Female
           15XX - 3/8                                              3/8"                              1/4"                        1/4-28 Female
           18XX - 3/8                                              3/8"                              1/4"                        1/4-28 Female
           19XX - 3/8                                              3/8"                              1/4"                        1/4-28 Female
           18XX - 1/2                                              1/2"                              5/16"                       1/4-28 Female
           19XX - 1/2                                              1/2"                              5/16"                       1/4-28 Female
           19XX - 3/4*                                             3/4"                              1/2"                        1/4 Female Pipe
           18XX - 1*                                               1/2"                              5/16"                       1/4 Female Pipe

           ** For Pipes and Tubes over 1" I.D.
           ** “XX” in Maxi-Vac’s part number represents shaft length as shown in the following listing.




Flexible Shafts for Maxi-Vac Model 1500 Only
1515-1/4          Flexible Shaft 15', for tubes 1/4" - 5/16" ID                       1515-3/8            Flexible Shaft 15', for tubes 3/8" - 1" ID
1525-1/4          Flexible Shaft 25', for tubes 1/4" - 5/16" ID                       1525-3/8            Flexible Shaft 25', for tubes 3/8" - 1" ID
1535-1/4          Flexible Shaft 35', for tubes 1/4" - 5/16" ID                       1535-3/8            Flexible Shaft 35', for tubes 3/8" - 1" ID


                                                                           –16–
Flexible Shafts for Maxi-Vac Models JM1200, JM1800 & JM1800R
1815-1/4         Flexible Shaft 15', for tubes 1/4" - 5/16" ID                      1835-3/8          Flexible Shaft 35', for tubes 3/8" - 1/2" ID
1825-1/4         Flexible Shaft 25', for tubes 1/4" - 5/16" ID                      1825-1/2          Flexible Shaft 25', for tubes 9/16" - 1" ID
1835-1/4         Flexible Shaft 35', for tubes 1/4" - 5/16" ID                      1835-1/2          Flexible Shaft 35', for tubes 9/16" - 1" ID
1815-3/8         Flexible Shaft 15', for tubes 3/8" - 1/2" ID                       1825-1            Flexible Shaft 25', for tubes over 1" ID
1825-3/8         Flexible Shaft 25', for tubes 3/8" - 1/2" ID                       1835-1            Flexible Shaft 35', for tubes over 1" ID


Flexible Shafts for Maxi-Vac Models JM1700, JM1900 & JM1900R
                                                                                    1925-3/4*         Flexible Shaft 25', for tubes over 1" ID with
1915-1/4         Flexible Shaft 15', for tubes 1/4" - 5/16" ID                                        1/4" Female Pipe Coupler*
1925-1/4         Flexible Shaft 25', for tubes 1/4" - 5/16" ID                      1935-3/4*         Flexible Shaft 35', for tubes over 1" ID with
1935-1/4         Flexible Shaft 35', for tubes 1/4" - 5/16" ID                                        1/4" Female Pipe Coupler*
1915-3/8         Flexible Shaft 15', for tubes 3/8" - 1/2" ID
1925-3/8         Flexible Shaft 25', for tubes 3/8" - 1/2" ID                       Dry Application - ONLY
1935-3/8         Flexible Shaft 35', for tubes 3/8" - 1/2" ID                       1925D-3/4 or 1935D-3/4 with Heat Resistant Covered
1925-1/2         Flexible Shaft 25', for tubes 9/16" - 1" ID                        Steel Casings

1935-1/2         Flexible Shaft 35', for tubes 9/16" - 1" ID

Note: All 19XX - 3/4 shafts require the A1900 adapter to accept 1/2 - 12 male threaded tools or brushes.



 CROSS REFERENCE TABLE
Maxi-Vac’s 1900 Series Flexible Shafts are interchangeable with competitive shafts as referenced below:


     PART NO.
     Goodway                            Maxi-Vac                            Maxi-Vac Description

     GTC-701-17                         1915-1/4                            15' for tubes 1/4" - 5/16" ID
     GTC-701-25                         1925-1/4                            25' for tubes 1/4" - 5/16" ID
     —                                  1935-1/4                            35' for tubes 1/4" - 5/16" ID
     GTC-702-17                         1915-3/8                            15' for tubes 3/8" - 1/2" ID
     GTC-702-25                         1925-3/8                            25' for tubes 3/8" - 1/2" ID
     GTC-702-35                         1935-3/8                            35' for tubes 3/8" - 1/2" ID
     GTC-703-25                         1925-1/2                            25' for tubes 9/16" - 1" ID
     GTC-704-25                         1925-1/2                            25' for tubes 9/16" - 1" ID
     GTC-703-35                         1935-1/2                            35' for tubes 9/16" - 1" ID
     GTC-704-35                         1935-1/2                            35' for tubes 9/16" - 1" ID
     GTC-720-25                         1925-3/4*                           25' for tubes 1" and over
     GTC-720-35                         1935-3/4*                           35' for tubes 1" and over
     GTC-721-25
                                        1925D-3/4*                          25' for tubes 1" and over dry applications
     GTC-721G-25
     GTC-721-35
                                        1935D-3/4*                          35' for tubes 1" and over dry applications
     GTC-721G-35

*ALL 1925-3/4, 1935-3/4, 1925D-3/4 & 1935D-3/4 shafts require the A1900 adapter to accept 1/2-12 male threaded tools and brushes.


                                                                          –17–
CUSTOM SHAFTS
Maxi-Vac will fabricate custom shafts in any length to fit your needs.
Call our customer service department with your specifications.



SHAFT LUBRICATOR
                                       Fast, easy preparation of flexible shafts for end-of the season storage.
                                       Simply fill the lubricator with water-soluble lubricant, connect the flexible
                                       shaft and attach a compressed air line (quick-connect fits air line). The
                                       flow of air and lubricant displaces water and coats the flexible shaft to
                                       protect it from harmful rust and corrosion. Lubricant flushes out with
                                       water when shaft is used again.


                                                                            1800SL Fits all 1800 Series Shafts
                                                                            1900SL Fits all 1900 Series Shafts




BRUSH AND BUFFING TOOL COUPLING DATA
  Sizes & Thread Data                Coupling Specifications

  1/4", 5/16", 3/8"                  Requires MV 0832 Coupler to fasten brush to ALL 1/4" O.D. Shafts, one coupler
  Diameter Brushes have              is provided with each pack of five (5) brushes.
  8-32 Female Threads


  7/16" thru 1" Diameter             Standard Maxi-Vac brush. Couples to all 15XX - 3/8, 18XX - 3/8, 19XX - 3/8,
  Brushes have 1/4-28 Male Threads   18XX - 1/2 and19XX - 1/2 series shafts. No couplers required.


  1" & over Diameter Brushes have    Standard Maxi-Vac brush. Couples to 1825 - 1 and 1835 - 1 shafts for use
  1/4 N.P.T. Male Threads            with Jet Mate 1800 Tube Cleaners; also couples to 1925 - 3/4 and 1935 - 3/4
                                     shafts for use with JM1900 Tube Cleaners.


  1508 Buffing Tools have            Couples directly to 15XX - 1/4, 18XX - 1/4, and 19XX - 1/4 shafts. For use in
  8-32 Male Threads                  5/16" and 3/8" diameter tubes.


  1509, 1510, 1511 Buffing Tools     Couples directly to 15XX - 3/8, 18XX - 3/8, 19XX - 3/8, 18XX - 1/2 and 19XX
  have 1/4 - 28 Male Threads         - 1/2 shafts. For use in 3/8" I.D. thru 1" I.D. tubes.




                                                       –18–
BRUSHES 1/4" – 1"                                                                               Order By Part Number and Size



1519 Nylon Condenser Brush, 5 of 1 size per package
   Recommended for removing soft deposits (mud, algae, etc.) in straight, non-ferrous tubes (copper, brass, plastic, etc.).
   Brush should be equal to or 1/16" smaller than tube I.D. (Sizes shown are actual O.D. of brush.)


                                                                                     1519 –        1/4, 5/16, 3/8 Female
                                                                                     1519 –        7/16, 1/2, 9/16, 5/8, 11/16
                                                                                                   3/4, 13/16, 7/8, 15/16, 1"



1529 Brass Condenser Brush, 5 of 1 size per package
   Recommended for removing soft and light scale deposits in straight, non-ferrous tubes. Brush should be equal to or 1/16"
   smaller than tube I.D. (Sizes shown are actual O.D. of brush.)


                                                                                     1529 –        1/4, 5/16, 3/8 Female
                                                                                     1529 –        7/16, 1/2, 9/16, 5/8, 11/16
                                                                                                   3/4, 13/16, 7/8, 15/16, 1"



1539 Maxi-Grit Nylon - priced per each
   Recommended for removing soft and light scale deposits in straight, ferrous and non-ferrous tubes.The abrasive
   impregnated nylon bristles of this brush clean and polish tubes in one step. Unlike regular spiral brushes, Maxi-Grit is
   designed to be oversized in the tube so the bristles lay over, putting the abrasive in contact with the tube wall.

                                                                                     1539-1/2      (for   tubes   1/4 - 3/8)
                                                                                     1539-3/4      (for   tubes   3/8 - 5/8)
                                                                                     1539-1        (for   tubes   11/16 - 3/4)
                                                                                     1539-1 1/4    (for   tubes   13/16 - 1")


1549 Stainless Steel Condenser Brush - priced per each
   Recommended for removing soft and light scale deposits in straight, ferrous tubes (carbon steel, stainless steel, etc. ) Brush
   should be equal to or 1/16" smaller than tube I.D. (Sizes shown are actual O.D. of brush).


                                                                                     1549 –        1/4, 5/16, 3/8 Female
                                                                                     1549 –        7/16, 1/2, 9/16, 5/8,
                                                                                                   11/16, 3/4, 13/16, 7/8, 15/16, 1"



1559 Maxi-Spin Clean Tapered Impregnated Nylon - priced per each
   Recommended for removing soft and light scale deposits in straight enhanced condenser tubes. The smaller diameter
   stands stiff and cleans the grooves. The longer bristles lay flat to clean the large areas between the grooves. The small
   diameter of the brush should match the tube diameter.

                                                                                     1559-1/2      (for 1/2" ID Tubes)
                                                                                     1559-5/8      (For 5/8" ID Tubes)
                                                                                     1559-3/4      (For 3/4" ID Tubes)




                                                               –19–
                                                                                                   Order by Part Number and Size
BRUSHES OVER 1" DIAMETER                                                                           Priced per each



1519 Nylon;                       1 1/4, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2, 2 3/4, 3, 3 1/4, 3 1/2, 3 3/4, 4

1529 Brass;                       1 1/4, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2, 2 3/4, 3, 3 1/4, 3 1/2, 3 3/4, 4

1549 Stainless;                   1 1/4, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2, 2 3/4, 3, 3 1/4, 3 1/2, 3 3/4, 4

1569 Tempered Wire*; 1 1/4, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2, 2 3/4, 3, 3 1/4, 3 1/2, 3 3/4, 4


*Tempered wire double spiral.
All Brushes over 1" Diameter have 1/4 NPT male threads, and are available on special order.




ADJUSTABLE BUFFING TOOLS
Adjustable Buffing Tools are used for removing light to medium scale deposits or for finishing tubes previously “roughed out”
with other cleaning tools. They can be used in both ferrous and non-ferrous straight tubes. They can be used only in a
clockwise rotation and not recommended for internally enhanced tubes.

                                                                      1508     Adjustable   Buffing Tool   5/16" to 3/8"
                                                                      1509     Adjustable   Buffing Tool   3/8" to 1/2"
                                                                      1510     Adjustable   Buffing Tool   1/2" to 5/8"
                                                                      1511     Adjustable   Buffing Tool   5/8" to 1"




BRASS TUBE PLUG*
Our tapered tube plugs are used to seal the ends of leaking chiller, condenser, or heat exchanger tubes. Simply drive the
plugs with a hammer to properly seat.


                                                              Plug No.        Description
                                                              BTP065          5/8" (15.9 mm) O.D. with BWG range 15-22

                                                              BTP075          3/4" (19.1 mm) O.D. with BWG range 15-22

                                                              BTP088          7/8" (22.2 mm) O.D. with BWG range 15-22

                                                              BTP100          1" (25.4 mm) O.D. with BWG range 15-22
*   Contact our customer service for other sizes.




                                                                  –20–
TUBE TOOLS FOR HEAT EXCHANGERS, CONDENSERS, CHILLERS
VACUUM LEAK TESTER – MODEL KVLD 3000
The vacuum leak tester KVLD-3000 is a simple method used by manufacturers and maintenance technicians to identify leaky
tubes in chillers, condensers and similar tubular exchangers. It is a fast and economical way of identifying tubes for plugging
or replacement. Compressed air flows through a venturi chamber, producing a vacuum in the tested tube. A steady gauge
reading indicates a good tube. A falling reading on the gauge indicates a leaking tube. A 3/4” x 20 BWG tube, 20 feet long,
can be tested in 5-6 seconds.



FEATURES:
• Only one tool necessary to test multiple sizes

• Built in easy to read vacuum gauge

• Muffled exhaust for quiet operation

• Lightweight easy to use

• No special operator training required



SPECIFICATIONS:
• Cover a wide range of tubes with one unit (1/4” to 3” tubes)

• Requires 90 PSI dry clean air at 26 CFM

• Carrying Case – 16” L x 12” W x 4” H

• Tool Weight – 4.4 lbs

• Approximate Shipping Weight – 6.6 lbs



Standard Unit KVLD 3000 is
equipped to test 5/8” to 1 1/4” tubes
Additional Nozzles to be ordered in
pairs (2 per)

 Nozzle No.          Tube Size
 K-1002              1/4” – 3/4” O.D. Tubes

 K-1003              5/8” – 1 1/4” O.D. Tubes

 K-1004              1 1/8” – 2” O.D. Tubes

 K-1005              1 7/8” – 3” O.D. Tubes




                                                                 –21–
ONE REVOLUTION TUBE CUTTER – MODEL ORTC-xxx*
These tools have been designed for cutting both ferrous and non-ferrous tubes, that are commonly found, in heat exchang-
ers, boilers and condensers. Our standard tool is adjustable from 1”-6” (25 mm-155 mm). Longer reach tools are available in
10” (254 mm) increments. The tool is designed to be used with a hand or ratchet wrench only. Impact wrenches should never
be used with these tools. The cutting of the tube is based on the eccentric principle, where the cutter bit moves out to the
tube wall as the cutter is rotated. Continued clockwise rotation will puncture and cut the tube in one revolution. Simply rotat-
ing the tool counterclockwise closes the bit and the tool can be removed from the tube.




                 Tube O.D.                        Tube Gauge               Tool I.D.   Tool Diameter
                                                                                                       Tool Number*   Tool Bit**
        [inch]                 [mm]                   [mm]                   [mm]          [mm]

                                                       14                 11.4-11.9        11.2         ORTC-113      N-625-3

                                                     15-16                 12-12.9         11.7         ORTC-119      N-625-3

         5/8                   15.8                  17-18                12.7-13.5        12.3         ORTC-123      N-625-2

                                                     19-20                13.5-14.2        13.1         ORTC-131      N-625-2

                                                       22                 14.0-14.7        13.6         ORTC-139      N-750-2

                                                     14-15                14.7-15.5        14.3         ORTC-145      N-750-2

                                                       16                 15.2-16.5        14.8         ORTC-151      N-750-2
         3/4                    19
                                                     17-18                15.9-16.5        15.3         ORTC-153      N-750-2

                                                     19-20                16.7-17.5        16.3         ORTC-163      N-1000-1

                                                     14-15                17.8-18.5        17.4         ORTC-174      N-1000-1

                                                     16-17                18.8-19.5        18.4         ORTC-184      N-1000-1
         7/8                   22.2
                                                       18                  19.3-20         19.0         ORTC-190      N-1000-1

                                                     19-20                19.8-20.6        19.3         ORTC-193      N-1000-2

                                                       12                 19.8-20.6        19.3         ORTC-193      N-1000-2

                                                       14                 20.8-21.6        20.5         ORTC-205      N-1000-2

                                                       14                 21.3-22.1        21.0         ORTC-210      N-1000-2
          1                    25.4
                                                     16-17                21.8-22.6        21.5         ORTC-215      N-1000-2

                                                     18-20                22.6-23.1        22.3         ORTC-223      N-1000-2

                                                       22                 23.9-24.6        23.2         ORTC-232      N-1000-2

*Order by specific tool number. **Replacement bits are ordered by tool bit number.




                                                                            –22–
MANUAL TUBE PULLER – MODEL MTP xxx-xx*

Manual tube pullers are used to extract sample
tubes in chillers and condensers for metallurgical
analysis; or, when a partial retube is required.




                                                       Tube OD
                                                                                                               Tube Puller   Spare Spears
             Tube O.D.                                      Wall Thickness                 Tube I.D.            Number*       Number**
                                    Tube Gauge
     [inch]              [mm]                            [inch]            [mm]   [inch]               [mm]

                                         14              0.083             2.11   0.459                11.66   MTP 625-14     JTP 5/8-14

                                         16              0.065             1.65   0.495                12.57   MTP 625-16     JTP 5/8-16
       5/8            15.88
                                         18              0.049             1.24   0.527                13.39   MTP 625-18     JTP 5/8-18

                                         20              0.035             0.89   0.555                14.10   MTP 625-20     JTP 5/8-20

                                         14              0.083             2.11   0.585                14.86   MTP 750-14     JTP 3/4-14

                                         16              0.065             1.65   0.620                15.75   MTP 750-16     JTP 3/4-16
       3/4            19.05
                                         18              0.049             1.24   0.652                16.56   MTP 750-18     JTP 3/4-18

                                         20              0.035             0.89   0.680                17.27   MTP 750-20     JTP 3/4-20

                                         14              0.083             2.11   0.709                18.01   MTP 875-14     JTP 7/8-14

                                         16              0.065             1.65   0.745                18.92   MTP 875-16     JTP 7/8-16
       7/8               22.2
                                         18              0.049             1.24   0.777                19.74   MTP 875-18     JTP 7/8-18

                                         20              0.035             0.89   0.805                20.45   MTP 875-20     JTP 7/8-20

                                         14              0.083             2.11   0.834                21.18   MTP 1000-14    JTP 1-14

                                         16              0.065             1.65   0.870                22.10   MTP 1000-16    JTP 1-16
        1                25.4
                                         18              0.049             1.24   0.902                22.91   MTP 1000-18    JTP 1-18

                                         20              0.035             0.89   0.930                23.62   MTP 1000-20    JTP 1-20

*Order by specific tool number. **Order spare spears by dimensional JTP number.




                                                                          –23–
3 ROLL TUBE EXPANDERS – 800 SERIES
Used to form a mechanical seal between tubes and tube sheets in condensers, chillers,
evaporators, and other tubular exchangers. Used to roll new tubes or reroll existing tubes.
Simply match tube OD and gauge along with tube sheet thickness for correct tool.

 TUBE ID                                                                             TUBE SHEET THICKNESS

                  [inch]         [mm]

     Min          0.334              8.48

     Max          1.027              26.9
                                                                                           MIN: 12.7 mm 1/2”                       MAX: 57.1 mm         2 1/4”

 TUBE OD

                  [inch]         [mm]                                                     Supplied standard with FTTC-800 thrust collar
     Min           1/2               12.7

     Max          1 1/8              28.5




                                                                                                            Tube Sheet Thickness
                                                                    Min.               Max.                                                            Mandrel
   Tube O.D.              Tube Gauge             Tube I.D.        Expansion          Expansion        1/2” to 1 1/2”   1 1/4” to 2 1/4”                Square
                                                                                                                                          Mandrel
                                                                                                    12.7 to 38.1 mm 31.7 to 57.1 mm

 [inch]    [mm]   [bwg]     [inch]     [mm]    [inch]   [mm]    [inch]   [mm]    [inch]     [mm]    Tool No. Roll No. Tool No. Roll No.             [inch]   [mm]

                   10       0.134       3.40   0.482    12.24   0.471    11.96   0.536      13.61     811       R-5     812     R-5-A      M-5       3/8     9.5

                    11      .0120       3.05   0.510    12.95   0.499    12.67   0.564      14.33     815       R-6     816     R-6-A      M-6       3/8     9.5

                   12       .0109       2.77   0.532    13.51   0.522    13.26   0.582      14.78     819       R-7     820     R-7-A      M-6       3/8     9.5

                   13       0.095       2.41   0.560    14.22   0.550    13.97   0.615      15.62     821       R-8     822     R-8-A      M-8       3/8     9.5

                   14       0.083       2.11   0.584    14.83   0.574    14.58   0.639      16.23     823       R-9     824     R-9-A      M-8       3/8     9.5

                   15       0.072       1.83   0.606    15.39   0.596    15.14   0.661      16.79     825      R-10     826    R-10-A      M-8       3/8     9.5

  3/4      19      16       0.065       1.65   0.620    15.75   0.605    15.37   0.685      17.40     827      R-10     828    R-10-A      M-9       3/8     9.5

                   17       0.058       1.47   0.634    16.10   0.619    15.72   0.699      17.75     829      R-11     830     R-11-A     M-9       3/8     9.5

                   18       0.049       1.24   0.652    16.56   0.619    15.72   0.699      17.75     829      R-11     830     R-11-A     M-9       3/8     9.5

                   19       0.042       1.07   0.666    16.92   0.642    16.31   0.722      18.34     831      R-12     832    R-12-A      M-9       3/8     9.5

                   20       0.035       0.89   0.680    17.27   0.642    16.31   0.722      18.34     831      R-12     832    R-12-A      M-9       3/8     9.5

                   21       0.032       0.81   0.686    17.42   0.624    16.31   0.722      18.34     831      R-12     832    R-12-A      M-9       3/8     9.5

                   22       0.028       0.71   0.694    17.63   0.624    16.31   0.722      18.34     831      R-12     832    R-12-A      M-9       3/8     9.5



                                               Tools from 3/8” – 1 1/2” available upon request.




                                                                              –24–
5 ROLL TUBE EXPANDERS – 800-5 SERIES
TUBE ID                                                                             TUBE SHEET THICKNESS

                 [inch]         [mm]

    Min          0.509          12.98

    Max          1.44           36.68
                                                                                          MIN: 12.7 mm 1/2”                       MAX: 57.1 mm         2 1/4”

TUBE OD

                 [inch]         [mm]                                                     Supplied standard with FTTC-800 thrust collar
    Min           5/8               15.8

    Max          1 1/2              38.1




                                                                                                         Tube Sheet Thickness
                                                                   Min.               Max.                                                            Mandrel
  Tube O.D.              Tube Gauge             Tube I.D.        Expansion          Expansion        1/2” to 1 1/2”   1 1/4” to 2 1/4”                Square
                                                                                                                                         Mandrel
                                                                                                   12.7 to 38.1 mm 31.7 to 57.1 mm

[inch]    [mm]   [bwg]     [inch]     [mm]    [inch]   [mm]    [inch]   [mm]    [inch]     [mm]    Tool No. Roll No. Tool No. Roll No.             [inch]   [mm]

                   13      0.095       2.41   0.560    14.22   0.550    13.97   0.615      15.62    821-5    R-5-5    822-5   R-5-A-5 M-822-5       3/8     9.5

                   14      0.083       2.11   0.584    14.83   0.574    14.58   0.639      16.23    823-5    R-6-5    824-5   R-6-A-5 M-824-5       3/8     9.5

                   15      0.072       1.83   0.606    15.39   0.590    14.99   0.661      16.79    825-5    R-7-5    826-5   R-7-A-5 M-826-5       3/8     9.5

                   16      0.065       1.65   0.620    15.75   0.605    15.37   0.685      17.40    827-5    R-7-5    828-5   R-7-A-5     M-13      3/8     9.5

                   17      0.058       1.47   0.634    16.10   0.619    15.72   0.699      17.75    829-5    R-7-5    830-5   R-7-A-5 M-830-5       3/8     9.5
 3/4      19
                   18      0.049       1.24   0.652    16.56   0.619    15.72   0.699      17.75    829-5    R-7-5    830-5   R-7-A-5 M-830-5       3/8     9.5

                   19      0.042       1.07   0.666    16.92   0.642    16.31   0.722      18.34    831-5    R-9-5    832-5   R-9-A-5     M-13      3/8     9.5

                   20      0.035       0.89   0.680    17.27   0.642    16.31   0.722      18.34    831-5    R-9-5    832-5   R-9-A-5     M-13      3/8     9.5

                   21      0.032       0.81   0.686    17.42   0.624    16.31   0.722      18.34    831-5    R-9-5    832-5   R-9-A-5     M-13      3/8     9.5

                   22      0.028       0.71   0.694    17.63   0.624    16.31   0.722      18.34    831-5    R-9-5    832-5   R-9-A-5     M-13      3/8     9.5



                                              Tools from 3/8” – 1 1/2” available upon request.




                                                                             –25–
 TECHNICAL SUPPORT AND SERVICE
We believe the most effective way to serve our customer is with strong technical support and
after the sale service. Maxi-Vac stocks a complete line of replacement parts and accessories for
quick response to Parts Orders. Trained technicians are available to assist with technical
inquiries. We also assure our customers of the highest level of knowledge and skill applicable to
our products by performing all warranty, repair and rebuild work in our own Service Department,
under company supervision.



 TERMS AND CONDITIONS

   • FREE FREIGHT all year on orders of 6 or more machines to one location.

   • Program Pricing available to qualified stocking distributors only. See
     your Maxi-Vac sales representative for qualification information.

   • ORDER PROCEDURES –
     Phone Maxi-Vac Sales Dept @ 630/620-6669 Monday thru Friday.
     FAX – Maxi-Vac @ 630-620-6683 – 24 hrs a day, 7 days a week
     E-Mail – 24 hrs a day, 7 days a week sales@maxi-vac.com

   • Minimum order $25.00 – $10.00 service charge on orders under $25.00

   • FREIGHT – All items will be shipped via UPS ground or common
     carrier unless otherwise specified by the customer. All orders will be
     sent prepaid, unless otherwise specified. Prepaid Freight will be
     added to the invoice.

   • Payment Terms – Open Account – upon approval of submitted credit
     applications, net 30 days. – Visa or Mastercard also accepted.

   • Returns – RGA numbers must accompany all returns. Restocking
     Fee – 15%. Only new, unused items will be accepted for restocking!

   • Prices subject to change without notice.
     All prices FOB Addison, IL




                                               –26–
                                                  Why Buy
                                                                                                ?
                             Since 1970 Maxi-Vac has been producing cleaning
                             equipment designed for commercial and industrial
                             applications

                             •   You will not find our equipment sold in discount stores.
                             •   You will not find plastic used in critical functions.
                             •   You will not find a warranty that restricts use to home and “hobby”
                                 activities.
                             •   You will not have to throw a Maxi-Vac machine away because it
                                 cannot be repaired.


                             The company is dedicated to providing
                             rugged/portable/lightweight/American made equipment of
                             the highest quality - utilizing state of the art components.

                             •   You will find our equipment sold exclusively thru established whole-
                                 sale/distributors across the country!
                             •   You will find top quality metal components in all key functions,
                                 designed for longer service!
                             •   You will find technical support after the sale from our staff of trained
                                 technicians!
                             •   You will find Maxi-Vac carries an extensive inventory of spare parts
                                 to minimize down time!
                             •   You will find all warranty, service, rebuild work is performed in our
                                 shop to insure the highest level of control and quality!
                             •   You will find a one year limited warranty on all Maxi-Vac
                                 machines with no restrictions on applications!



                                          Why Not Buy
                                                                                                ?

Mailing Address: P.O. Box 1276, Addison, IL 60101 - 8276
                                                                                                            DISTRIBUTED BY:
Phone: (630) 620-6669 Fax: (630) 620-6683

Shipping Address: 367#F Rohlwing Rd., Addison, IL 60101 - 8276

E-Mail Address: sales@maxi-vac.com




                                  Visit us on the WEB @ www.maxi-vac.com                                             MV273 1/06

								
To top