Docstoc

bb tools flyer

Document Sample
bb tools flyer Powered By Docstoc
					                                                                            129


CHEMICALS

Contents
                             Pages                                 Pages

WD 40                           130   LOCTITE CLEANERS &
3-IN-1 PRODUCTS             130-131   DEGREASERS                  182-183
PLUS GAS                        131   LOCTITE DISPENSERS          183-184
AMBERSIL CLEANERS           131-136   LOCTITE REPAIR KITS             184
AMBERSIL LUBRICANTS         136-141   LOCTITE WEARING COMPOUNDS 184-185
AMBERSIL ANTI-CORROSION     141-142   LOCTITE BRUSHABLE CERAMICS      185
AMBERSIL WELDING PRODUCTS 141-143     LOCTITE PLASTIC PADDING     186-188
AMBERSIL FAULT DETECTORS        143   THISTLEBOND PRODUCTS            188
AMBERSIL LEAK DETECTORS         143   DEVCON PUTTY                188-190
AMBERSIL CUTTING LUBRICANTS     144   DEVCON LIQUIDS                  190
AMBERSIL SPATTER RELEASE        144   DEVCON FLEXANE PRODUCTS         191
AMBERSIL MOULD PRODUCTS 144-146       DEVCON CLEANERS                 192
AMBERSIL EJECTOR PIN                  DEVCON ADHESIVES            192-193
LUBRICANTS                      146   ARALDITE ADHESIVES          193-195
MOLYSLIP PRODUCTS           147-148   ELECTRONIC SOLVENT CLEANERS 195-196
ROCOL LUBRICANTS            148-151   GASKET COMPOUNDS            196-197
ROCOL GREASE                151-154   JOINTING COMPOUNDS              197
ROCOL GEAR & COMPRESSOR               PTFE TAPE                       197
OILS                        154-155
                                      LEAK DETECTORS                  198
ROCOL ANTI-CORROSION            155
                                      CUTTING COMPOUNDS               198
ROCOL METALWORKING
LUBRICANTS                  156-164   DOW CORNING PRODUCTS        198-199
ROCOL CLEANERS              164-165   MOLYKOTE PRODUCTS               199
ROCOL PIPE JOINTING                   EVERBUILD SILICONES         199-203
COMPOUNDS                   165-166   EVERBUILD CLEANERS              203
ROCOL GAS INDUSTRY                    EVERBUILD SEALANT GUNS          204
PRODUCTS                        166
                                      EVERBUILD EXPANDING FOAM 204-205
LOCTITE THREADLOCKERS       167-168
                                      EVERBUILD ADHESIVES         205-208
LOCTITE THREAD SEALANTS     168-169
                                      EVERBUILD TILE ADHESIVES
LOCTITE GASKETING           169-170
                                      & GROUT                     208-210
LOCTITE RETAINERS           170-171
                                      EVERBUILD PAINT, PUTTY
LOCTITE INSTANT ADHESIVES   171-173   & FILLERS                   211-212
LOCTITE STRUCTURAL                    EVERBUILD PROTECTORS            212
ADHESIVES                   174-175
                                      EVERBUILD CLEANING/
LOCTITE EPOXY PUTTY         175-177   PRESERVING LIQUIDS         212-214
LOCTITE FLEXIBLE SILICONES  177-179   RAWLPLUG PLASTIC WOOD
LOCTITE PRIMERS                 179   & PLUGS                         214
LOCTITE ACTIVATORS              180   EVERBUILD WIPES/
LOCTITE ANTI-SEIZE                    HAND CLEANERS                   214
COMPOUNDS                   180-181
130                           WD-40 & 3-IN-ONE PRODUCTS




           WD-40 Protective Lubricant                                   3-IN-ONE Penetrant Spray                                   3-IN-ONE White Lithium Grease
WD-40 is a spray-on multi-purpose liquid.                    Fast acting penetrant spray that frees rusted and seized        Long lasting, spray-on lubricant that also prevents rust
Features include                                             fittings. Applications include nuts, bolts, pipe fittings and   and corrosion. Suitable for automotive, marine and
• Disperses water                                            engines                                                         workshop use. Features include
• Penetrates and loosens rusted parts                                                                                        • Sprays on evenly without drips or splatter
                                                               Stock No                   Size                    Price
• Protects against rust and corrosion                                                                                        • Suitable for heavy duty applications
• Lubricates and stops squeaks                                 262652                    400 ml                     3.89     • Contains no hazardous chemicals; suitable for use
• Many cleaning applications                                                                                                   around the house
• Operates from -100°F to +500°F                                                                                             • Water and heat resistant
• Will not affect most fabrics, rubber or plastics                                                                           • Operates from -10°C to +250°C

WD-40 Aerosol                                                                                                                  Stock No                  Size                   Price

  Stock No                   Size                    Price                                                                     262654                   400 ml                   3.34

  262610                    250 ml                    2.04
  262620                    450 ml                    3.09

WD-40 Bottle
Supplied with spray applicator
  Stock No                   Size                    Price
  262630                   5 litres                  17.35

WD-40 Drum
  Stock No                   Size                    Price
  262635                   25 litres                 86.43
                                                                        3-IN-ONE Silicone Spray
WD-40 Spray Applicator                                       Long lasting, quick drying, go-anywhere, advanced
  Stock No                   Size                    Price   silicone spray that lubricates, inhibits corrosion and
                                                             protects electrical parts. Features include
  262636                    550 ml                    2.74   • Safe on metal, rubber, wood and vinyl
                                                             • Suitable for wet environments and marine use                   3-IN-ONE High Performance Lubricant
                                                             • No-mess formula
                                                             • Operates from -40°C to +200°C                                 This advanced PTFE synthetic formula provides
                                                             • NSF H2 registered                                             outstanding and long-lasting lubrication and corrosion
                                                                                                                             protection under extremes of temperature, pressure and
                                                               Stock No                   Size                    Price
                                                                                                                             motion. Extends the life of all types of tools and
                                                               262653                    400 ml                     3.39     machinery. Features include
                                                                                                                             • Safe on metal, rubber, wood, vinyl and most plastics
                                                                                                                             • Dramatically reduces friction and wear
                                                                                                                             • Drives out moisture
                                                                                                                             • Operates from -45°C to +235°C
                                                                                                                               Stock No                  Size                   Price
                                                                                                                               262655                   400 ml                   4.73




                    3-IN-ONE Oil
High quality light lubricating oil. Features include
• Contains a rust inhibitor
• Plastic spout on flexi-can enables access to confined
  spaces without spillage
• Aerosol contains PTFE for superior lubrication and
  longer lasting protection
 Stock No                   Size                     Price
 262640               100 ml Flexi-Can                1.58
 262650               200 ml Flexi-Can                2.57
 262651                250 ml Aerosol                 1.94
                                 3-IN-ONE PRODUCTS/PLUS GAS/AMBERSIL CLEANERS                                                                                               131




     3-IN-ONE Heavy Duty Degreaser                                         Plus Gas Dismantling Fluid                       Amberclens Trigger Multi-Surface Cleaner
Heavy duty, professional, spray-on cleaner and                  The original Plus Gas Formula A dismantling fluid that      Ambersil product. A multi-surface, water based cleaner
degreaser. Produces a water-rinseable, deep                     penetrates deep down to break the grip of rust, scale,      that is ideal for industrial, engineering, aerospace and
penetrating citrus foam that quickly removes grease, oil,       carbon, paint and gum. Usually works in seconds             commercial cleaning/degreasing applications
tar and grime                                                                                                               • Cleans all hard surfaces and fabrics
  Stock No                   Size                   Price
                                                                Plus Gas Aerosol                                            • Safe on delicate plastics such as polycarbonate
                                                                                                                            • Ready to use, no need for mixing or diluting
                                                                  Stock No                  Size                  Price
  262656                    500 ml                    3.63                                                                  • Non-flammable and biodegradable
                                                                  262730                   200 ml                  3.49     • Viscous formulation allows application to vertical
                                                                  262740                   400 ml                  5.44       surfaces without wasteful run-off
                                                                                                                            • Available in a convenient to use trigger spray or in a
                                                                                                                              5 litre bottle
                                                                Plus Gas Tin with Spout                                     • Aerospace approved
                                                                  Stock No                  Size                  Price     • Conforms to AMS 1550b and Cathay Pacific MAR 26/01
                                                                                                                              specifications
                                                                  262710                   250 ml                  3.19
                                                                  262720                   500 ml                  5.27      Stock No                  Size                  Price
                                                                                                                             268201            750 ml Trigger Spray           4.41
                                                                Plus Gas Tin                                                 268202                 5 litre Bulk             17.61
                                                                  Stock No                  Size                  Price
                                                                  262745                  1 litre                  8.73
                                                                  262750                  5 litres                28.48

                                                                Plus Gas Drum
                                                                  Stock No                  Size                  Price
                                                                  262755                  25 litres              112.96
   3-IN-ONE Anti-Seize Copper Grease
This powerful lubricant and anti-seize compound protects
metal from corrosion, water, heat and acid. Once applied,
it forms a friction-reducing protective coating that will not
wash off or burn. Features include
• Prevents seizure from high temperature and corrosion
• Assists dismantling of threaded fasteners
• Prevents disc brake squeal
• Capable of withstanding extreme temperatures;
   operates from -30°C to +1100°C
                                                                                                                                Amberclens NB Foaming Cleaner
  Stock No                   Size                   Price
  262657                    300 ml                    3.59                                                                  Ambersil product. A water based foaming cleaner that
                                                                                                                            has been formulated to meet the high standards required
                                                                                                                            for use in the aerospace industry. Features include
                                                                                                                            • Cleans all hard surfaces and fabrics
                                                                                                                            • Safe on delicate plastics such as polycarbonate
                                                                                                                            • Non-flammable and anti-static
                                                                                                                            • Quick and easy to use; spray on, wipe off
                                                                                                                            • Stable foam allow application to vertical surfaces
                                                                Amberclens Anti-Static Foaming Cleaner                        without wasteful run-off
                                                                Ambersil product. A multi-purpose, water based, foaming      Stock No                  Size                  Price
                                                                cleaner that is ideal for general cleaning of electronic,
                                                                industrial and office equipment. Features include            268203                   400 ml                  5.05
                                                                • Safe on plastics, metals, painted and glazed surfaces
                                                                • Removes tough stubborn stains such as grease and
                                                                  grime
                                                                • Anti-static formulation reduces the attraction of
                                                                  airborne dust
                                                                • Quick and easy to use; spray on, wipe off
                                                                • Fitted with 360° spray system for all angle use
                                                                • Foaming action limits over application
                                                                • Conforms with military specifications, NATO catalogue
                                                                  no. 6550-99-2125987
                                                                 Stock No                  Size                   Price
                                                                 268200                   400 ml                   3.15
132                           AMBERSIL CLEANERS

                                                                                                                           Aquasafe Detergent Cleaner/Degreaser CONTINUED >

                                                                                                                            Aquasafe RTU Cleaner/Degreaser
                                                                                                                            Ready to use Aquasafe cleaner; pre-diluted 3:1. Supplied
                                                                                                                            in a trigger spray bottle
                                                                                                                              Stock No                   Size                   Price
                                                                                                                              268212                    750 ml                   6.58




               Amberclens Wipes                               Ambersolv AB1 Micro Emulsion Cleaner
Ambersil product. A multi-purpose cleaning wipe              Ambersil product, A water based micro-emulsion
offering all the advantages of the original Amberclens       cleaner, formulated from a blend of high grade citrus oils
cleaner. Ideal for use on business machines, office          and surfactants; an ideal alternative to traditional
equipment, machinery, plant, cabinets and casings.           solvents and highly alkaline cleaners. Suitable for use in
Features include                                             engineering, aerospace and general industrial
• Safe on plastics, metals and painted surfaces              applications. Features include
• Quickly and easily removes dirt, grease and grime          • Safe on metals and most plastics
• Anti-static formulation reduces the attraction of          • Removes tough stubborn soiling such as oil, grease, tar,
  airborne dust                                                bitumen, dirt, grime, silicone, water based paints, inks      Amberklene FE10 Fast Drying Solvent Cleaner
• Convenient and easy to use, especially where water           and dyes
  and cleaning materials are not freely available            • Non-flammable and biodegradable                              Ambersil product. A fast and effective solvent
• Big value 100 wipe pack                                    • Does not contain chlorinated solvents, bleaching             cleaner/degreaser. Suitable for use in industrial, aviation,
                                                               agents or abrasives                                          automotive, polymer processing, general engineering and
  Stock No               Description                Price
                                                             • Low pH 9.3                                                   textile applications. Features include
  268204               Cleaning Wipes                 3.77   • Industrial strength, can be diluted 1:20 with water          • Safe on ferrous and non-ferrous metals and most
                                                             • Multi-use by spraying, soaking, immersion, wiping or           plastics
                                                               ultrasonic                                                   • Powerful flushing action; rapidly removes contaminants
                                                             • Meets many specifications; Boeing D6-17487,                  • Evaporates quickly to leave a clean dry surface
                                                               McDonnell Douglas CSD#1, AMS 1526B                           • Excellent alternative to 1.1.1 Trichloroethane
                                                             • Core laboratories EPA-classified as non-hazardous            • Conforms to military specifications, Nato catalogue no.
                                                               Stock No                  Size                   Price         6850-99-6636478

                                                               268206                   5 litres                24.58         Stock No               Description                Price
                                                               268207                  25 litres               101.29         268213               400 ml Aerosol                4.90
                                                               268208                  200 litres              688.71         268214                5 litre Drum                27.79
                                                                                                                              268215                25 litre Drum              109.47
                                                                                                                              268216               200 litre Drum              744.40




  Ambersolv AB1 Citrus Foam Cleaner
Ambersil product. A water based foaming cleaner,
formulated from a blend of high grade citrus oils and
surfactants; and ideal alternative to traditional solvents
and highly alkaline cleaners. Suitable for use in
engineering, aerospace and general industrial
applications. Features include
• Safe on metals and most plastics
• Removes tough stubborn soiling such as oil, grease,
  tar, bitumen, dirt, grime, silicone, water based paints,    Aquasafe Detergent Cleaner/Degreaser
  inks and dyes
• Non-flammable and biodegradable                            Ambersil product. A water based detergent cleaner that          Amberklene ME20 Heavy Duty Solvent Cleaner
• Does not contain chlorinated solvents, bleaching           exhibits high solvency power; an ideal alternative to
  agents or abrasives                                        traditional solvents. Suitable for use in industrial,          Ambersil product. A highly effective, heavy duty,
• Low pH 9.3                                                 automotive, engineering, transport, aviation, marine and       cleaner/degreaser. Suitable for use in all industrial,
• Foaming action limits over application                     electronics applications. Features include                     aviation, automotive and engineering applications that
• Meets many specifications; Boeing D6-17487,                • Safe on metals, most plastics, rubber and painted            require a stronger degreaser with a longer contact time.
  McDonnell Douglas CSD#1, AMS 1526B                           surfaces                                                     Features include
• Core laboratories EPA-classified as non-hazardous          • Removes tough stubborn soiling such as oil, grease,          • Safe on ferrous and non-ferrous metals and most
                                                               grime, silicone, wax, nicotine, soot, ink and coffee           plastics
  Stock No                   Size                   Price
                                                             • Non-flammable and biodegradable                              • Heavy duty cleaner for extra stubborn stains and
  268205                    400 ml                    3.05   • Contains a highly effective corrosion inhibitor to help        soiling
                                                               prevent flash rusting                                        • Removes heavy deposits of oil, grease, waxes and
                                                             • Multi-use by spraying, soaking, brushing, immersion,           silicones
                                                               wiping or ultrasonic                                         • Superior wetting properties ensure extended contact
                                                                                                                              time with soiling
                                                             Aquasafe Bulk Cleaner/Degreaser                                • Controlled evaporation to leave a clean dry surface
                                                             • Super industrial strength, can de diluted 1:40 with water    • High flash point +41°C
                                                               Stock No                  Size                   Price         Stock No               Description                Price
     All prices are in pounds sterling
                                                               268209                   5 litres                20.63         268217               400 ml Aerosol                4.99
             and exclude V.A.T.                                268210                  25 litres                82.58         268218                5 litre Drum                28.29
                                                               268211                  200 litres              568.34         268219                25 litre Drum              111.43
                                                                                                                              268220               200 litre Drum              744.40
                                                                                                        AMBERSIL CLEANERS                                                     133




 Amberklene LO30 Low Odour Solvent Cleaner                               Amberton Contact Cleaner                                       BA40 Solvent Cleaner
Ambersil product. A highly effective, low odour,              Ambersil product. A quick and effective, ultra pure,         Ambersil product. Water soluble solvent cleaner.
cleaner/degreaser which is safe for use on a wide variety     contact cleaner; ideal for use on electrical contacts,       A specialist cleaner/degreaser designed to remove a
of materials. Suitable for use in industrial, aerospace and   switches, electrical assemblies, PCBs, relays and            variety of uncured sealant and adhesive residues,
general engineering applications and for the precision        precision equipment. Features include                        principally in aerospace applications. Features include
cleaning of electronic and electrical equipment.              • Excellent material capability; safe on metals, plastics,   • Safe for use on metals
Features include                                                rubbers and glass                                          • Removes many stubborn residues such as uncured
• Safe for use on metals and painted surfaces                 • Quick and efficient cleaning                                 polysulphides, adhesives, inks, resins, varnishes and
• Outstanding compatibility with plastics                     • Effective light duty degreaser; will remove oil, grease,     lacquers
• Evaporates quickly to leave a clean dry surface               waxes and silicones                                        • Low pressure spray provides even coverage and
• Low odour, ideal for use in enclosed areas                  • Evaporates very quickly to leave no residue                  prevents splash back
• Ultra low conductivity                                      • Low odour                                                  • Extremely fast evaporation to leave no residue
• Meets aerospace specifications; US Federal                  • Non-conductive
                                                                                                                             Stock No              Description                Price
  Specification TT-N-95B, listed in British Airways           • Rail approved product, catalogue no. 07/07224
  standard practice manual                                                                                                   268234               400 ml Aerosol                4.67
                                                                Stock No               Description                Price
  Stock No               Description               Price
                                                                268229               400 ml Aerosol                6.31
  268221               400 ml Aerosol                5.12       268230                 5 litre Drum               35.37
  268222                5 litre Drum                28.91       268231                25 litre Drum              142.84
  268223                25 litre Drum              112.73       268232               200 litre Drum              971.36
  268224               200 litre Drum              766.53




                                                                                                                                 IPA Electronic Cleaning Solvent
                                                                                                                           Ambersil product. Universally accepted 'safe' solvent for
                                                                                                                           the quick and efficient cleaning of delicate electrical and
                                                                                                                           electronic components in a wide variety of electronic,
                                                                            NF Precision Cleaner                           computing, aerospace and industrial applications. Ideal
 Ambersolv SB1 Citrus Based Solvent Cleaner                                                                                for cleaning video and audio heads, photocopier drums,
                                                              Ambersil product. Non-flammable contact cleaner.             optical devices, switches and PCBs. Features include
Ambersil product. A high performance citrus based             Suitable for cleaning and degreasing all types of            • Gentle, yet highly effective, alcohol based cleaner
cleaning agent; an ideal alternative to traditional           electrical and electronic components where a shutdown        • Excellent material compatibility, safe on plastics and
chlorinated or highly volatile solvent cleaners. Suitable     has to be avoided. Suitable for relays, switches, circuit      rubber
for use in aerospace, industrial and general engineering      breakers, alarm and signal systems, PCBs, connectors,        • Evaporates to leave a clean dry surface
applications. Features include                                generators, contacts, laboratories and test equipment,       • Can be used to remove moisture by forming an
• Safe on metals and most plastics                            terminals plugs and jacks, electromechanical assemblies,       azeotrope, a mixture of IPA and water that evaporates
• Effective on a wide range of soiling such as oil, grease,   motor controls and sensors                                     more quickly than water
  tar, bitumen, silicones, rubber-based adhesives, oil-                                                                    • Conforms to BS 1595, ASTM D770, DIN 53245
  based paints, inks and dyes                                   Stock No               Description                Price
• Deep penetrating action for heavy soiling                     268233               400 ml Aerosol               15.06      Stock No              Description                Price
• Natural based and biodegradable                                                                                            268235               400 ml Aerosol               4.93
• High flash point +67°C, classified as non-flammable                                                                        268236                5 litre Drum               27.60
• Multi-use by spraying, soaking, immersion, wiping or                                                                       268237                25 litre Drum              93.84
  ultrasonic                                                                                                                 268238               200 litre Drum             638.13
• Meets many specifications; Boeing D6-17487,
  McDonnell Douglas CSD#1, Pratt and Whitney PMC
  1409/1/2/3/4
  Stock No              Description                Price
  268225               400 ml Aerosol               5.03
  268226                5 litre Drum               28.19
  268227                25 litre Drum             116.80
  268228               200 litre Drum             795.05




                                               Looking for an item not listed? Call our Sales Team on 01224 620944
134                          AMBERSIL CLEANERS




 Lec-Klene High Flash Point Solvent Cleaner                                    Glass Cleaner                                                  Air Duster
Ambersil product. A highly refined solvent cleaner which     Ambersil product. Formulated to quickly and easily          Ambersil product. Aerosol contains pure liquefied inert
has been formulated to satisfy the exacting requirements     produce a sparkling finish on all glass and ceramic         gas which produces a powerful blast of dry gas for the
of military, aerospace and defence related industries.       surfaces. Suitable for glass screens, windscreens,          easy removal of dust and contamination from electrical
Features include                                             lenses and mirrors. Features include                        and electronic equipment. Also suitable for general
• Safe on metals, painted surfaces, epoxy based              • Produces a smear and residue free finish                  cleaning in areas where the use of liquid cleaners is
  composites, acrylic sheet, plastics and rubbers            • Pleasant perfume leaves area smelling fresh and clean     undesirable. Features include
• Powerful cleaner which rapidly removes oil, grease,                                                                    • Safe on metals, plastics, rubbers and painted surfaces
                                                              Stock No              Description               Price
  wax, tar, bitumen, brake dust and other general soiling                                                                • Powerful yet economical
• High flash point +62°C                                      268246               400 ml Aerosol               3.81     • Non-flammable
• Ultra low odour, ideal for use in enclosed areas            268247                 5 litre Drum              16.44     • Extension tube allows access to confined areas
• Controlled evaporation to leave zero residue                268248                25 litre Drum              55.88     • Non ozone depleting, does not contain CFC's or HCFC's
• Non-conductive                                                                                                         • Meets military specifications, NATO catalogue no.
• Meets military and industrial specifications;                                                                            6830-993826112
  DEF STAN 68-148 issue 2, ASTM F159-97, ASTM F1110
                                                                                                                          Stock No              Description               Price
  Stock No              Description               Price
                                                                                                                          268250               400 ml Aerosol              7.89
  268239              400 ml Aerosol               5.86
  268240               5 litre Drum               33.26
  268241               25 litre Drum             119.73
  268242              200 litre Drum             814.21




                                                                       Label and Sticker Remover
                                                             Ambersil product. Speciality product for the fast and
                                                             effective removal of self-adhesive paper labels and
                                                             adhesive residues. No need to scratch or scrape.
                                                             Features include                                                      Multi-Surface Spray Polish
                                                             • Safe on most surfaces
                                                             • Effective cleaner for the removal of some inks and dyes   Ambersil product. Cleaner and polish for hard surfaces.
                                                             • Controlled evaporation allows time for solvent to         Suitable for office equipment, all types of furniture,
               Solvent Degreaser                               penetrate label                                           formica, vinyl, enamel and automotive interiors.
                                                             • Pleasant citrus smell                                     Features include
Ambersil product. A powerful, water rinsable, solvent                                                                    • Multi-purpose formula, cleans and polishes in one
based, degreaser. Ideal for use in the most demanding         Stock No              Description               Price      • Wax/silicone blend produces high gloss shine
industrial, automotive and engineering applications.          268249               200 ml Aerosol               4.05     • Industrial strength
Features include                                                                                                         • Does not leave any dry white residues
• Safe on metals, painted surfaces and most plastics                                                                     • Pleasant perfume leaves area smelling fresh and clean
• Powerful solvent blend with fast penetrating action that
  cuts through the heaviest oil and grease soiling                                                                        Stock No              Description               Price
• Contains a highly effective emulsifier that enables                                                                     268251               400 ml Aerosol              2.97
  dissolved oil/grease residues to mix with water for easy
  wash-off
• High flash point +39°C
• Multi-use by spraying, soaking, immersion, brushing
  and wiping
  Stock No              Description               Price
  268243                5 litre Drum              14.99
  268244                25 litre Drum             52.91
  268245               200 litre Drum            359.84
                                                                                                       AMBERSIL CLEANERS                                                   135




             Hard Surface Cleaner                                             Gasket Stripper                                 Aquasafe FG Cleaner/Degreaser
Ambersil product. Water based, highly alkaline,            Ambersil product. Non-chlorinated gaskets, paints,            Ambersil product. Concentrated, industrial strength,
detergent cleaner. Features include                        adhesives and sealants stripper. Features include             biodegradable, water based, cleaner/degreaser.
• Suitable for hot or cold use                             • High penetrating power                                      Exceptional, multi-purpose cleaner, it can be used for a
• Concentrated; formulated for use in a dilution with      • Clings to vertical surfaces; ideal for fixed industrial     multitude of cleaning applications in the food industry.
  water                                                      equipment                                                   Authorised for use on food processing and packaging
• Multi-purpose; quickly removes grease, oil, grime,                                                                     equipment, as a floor and wall cleaner, in inedible
  nicotine, wax and polish                                   Stock No                Description                 Price   product processing, non-processing and exterior areas.
                                                             268258                400 ml Aerosol                 6.58   Features include
  Stock No              Description               Price
                                                                                                                         • Safe on all metals and safe on plastics if rinsed after
  268252                5 litre Drum               11.42                                                                   application
  268253               25 litre Drum               49.87                                                                 • Quickly penetrates and removes grease, oil, grime and
  268254               200 litre Drum             369.92                                                                   tough stains from any washable surface
                                                                                                                         • Effective in both cold and warm water
                                                                                                                         • Biodegradable as per OECD 301B
                                                                                                                         • Non-flammable and non-abrasive
                                                                                                                         • Does not contain ammonia, chlorinated or petroleum
                                                                                                                           solvents, phosphates, EDTA or nonylphenolethoxylates
                                                                                                                         • Economical and convenient, because it can be diluted
                                                                                                                           up to 1:100 to meet all cleaning and degreasing needs
                                                                                                                         • NSF A1 registered (no. 137997); meets USDA 1998 A1
                                                                                                                           guidelines for use in the food industry
                                                                                                                           Stock No              Description               Price
                                                                                                                           268260            750 ml Trigger Spray            6.98




                                                                   Amberclens FG Foam Cleaner
                                                           Ambersil product. Heavy duty, biodegradable, water
                                                           based, all-purpose, foam cleaner/degreaser. Specially
              Traffic Film Remover                         formulated for use on food processing and packaging
                                                           equipment. Features include
Ambersil product. Concentrated vehicle wash.               • Safe on all metals and safe on plastics if rinsed after
Features include                                             application
• Removes heavy and oily soiling from commercial           • Removes grease, oil, grime and tough stains from any
  vehicles, side curtains, plant and machinery               washable surface
• Suitable for hot or cold use                             • Biodegradable as per OECD 301B
• Multi-use by hand, swab, brush and immersion             • Does not contain ammonia, chlorinated or petroleum
                                                             solvents, phosphates, EDTA or nonylphenolethoxylates
  Stock No              Description               Price
                                                           • Stable non-dripping formula; ideal on vertical surfaces
  268255                5 litre Drum               11.03   • Foaming action limits over application
  268256               25 litre Drum               47.74   • NSF A1 registered (no. 137995); meets USDA 1998 A1
  268257               200 litre Drum             270.74     guidelines for use in the food industry                        Amberklene FG Cleaner/Degreaser
                                                             Stock No                Description                 Price   Ambersil product. Heavy duty, solvent based, industrial,
                                                             268259                500 ml Aerosol                 3.90   cleaner/degreaser. Specially formulated for use on food
                                                                                                                         processing and packaging equipment. Authorised for
                                                                                                                         use in inedible product processing, non-processing and
                                                                                                                         exterior areas. Features include
                                                                                                                         • Safe on metals. Test on plastics and some paints prior
                                                                                                                           to use
                                                                                                                         • Quickly penetrates and removes grease, oil, grime, tar,
                                                                                                                           adhesives, dirt and water from metal parts, equipment
                                                                                                                           and machinery
                                                                                                                         • Higher flash point of 40°C for application safety
                                                                                                                         • Non ozone depleting and biodegradable
                                                                                                                         • Does not contain water or chlorinated solvents
                                                                                                                         • Non-staining neutral product
                                                                                                                         • Controlled evaporation to allow maximum contact time
                                                                                                                           with contamination
                                                                                                                         • Fitted with 360° spray system for all angle use,
                                                                                                                           including upside down
                                                                                                                         • NSF C1 registered (no. 137996); meets USDA 1998 C1
                                                                                                                           guidelines for use in the food industry
                                                                                                                           Stock No              Description               Price
                                                                                                                           268261               500 ml Aerosol               5.78
136                          AMBERSIL CLEANERS & LUBRICANTS




           Stainless Steel Cleaner FG                         PX24 Industrial Strength Protective Lubricant                          AGL1 Greaseless Lubricant
Ambersil product. Water based, non-corrosive, foaming,       Ambersil product. Formulated specifically to meet the        Ambersil product. AGL1 is a multi-purpose, greaseless
cleaner/degreaser. This product combines tough               exacting demands of military maintenance personnel,          lubricant that prevents electrical and electronic
cleaning power with a durable protective coating in one      PX24 is a multi-purpose product for lubrication,             malfunction caused by water penetration, humidity,
application. Features include                                protection against corrosion, water displacement, light      condensation or corrosion. The stable, low surface
• Safe on stainless steel, aluminium, chrome and most        surface rust removal and penetration to free seized parts.   tension, high capillary action formula provides great
  plastics (test on plastics prior to use)                   Features include                                             penetrating and wetting power. Features include
• Cleans grease, dirt, dust, fingerprints and watermarks     • Safe on metals, paint, rubber and plastics                 • Can be used on all metals and alloys
  from stainless steel                                       • Penetrates quickly to free rusted or seized parts          • Safe on modern plastics, painted surfaced, coatings
• Leaves a long term, non-greasy, protective coating         • Highly effective water displacement properties make          and rubbers
  which inhibits staining and contamination                    PX24 the perfect damp-start solution                       • Prevents corrosion by displacing moisture
• Foaming action limits over application                     • Leaves a protective, non-conductive, lubricating film      • Restores resistance value by reducing current leakage
• Fitted with 360° spray system for all angle use,             that remains operational at severe sub-zero                • Leaves a thin, protective, high dielectric strength,
  including upside down                                        temperatures                                                 lubricating film
• NSF C1 registered (no. 138212); meets USDA 1998 C1         • Treated, freshly machined parts resist finger-printing     • Helps restore water damaged electrical equipment
  guidelines for use in the food industry                      and will stay clean and bright                             • Frees rusted or seized parts by penetrating under dirt
                                                             • Aerosol is fitted with 360° spray system for all angle       and scale into the finest pores and cracks
  Stock No              Description               Price
                                                               use, including upside down                                 • Fitted with 360° spray system for all angle use
  268262               500 ml Aerosol               5.35     • Flash point >80°C, not classified as flammable under       • Water displacement: conforms to IP178/61, method B
                                                               CHIP regulations                                           • Salt spray resistance: 55 hours
                                                             • Copper corrosion: conforms to IP154 Max 1, no pitting
                                                                                                                            Stock No               Description               Price
                                                               or etching
                                                             • Corrosion protection: conforms to IP178A, no corrosion       268271               400 ml Aerosol               4.42
                                                             • Water displacement: conforms to IP178B, complete
                                                               displacement of saline test solution
                                                             • Specifications/Approvals: Def Stan 68-10/4 PX24, NATO
                                                               Code C-634, Augusta Westland Helicopters WHPS 158
                                                               Stock No              Description               Price
                                                               268267               400 ml Aerosol              5.00
                                                               268268                5 litre Drum              28.02
                                                               268269                25 litre Drum             95.28
                                                               268270               200 litre Drum            647.84




            40+ Protective Lubricant
Ambersil product. The complete maintenance treatment
for lubrication, protection against corrosion, water
displacement, light surface rust removal and penetration                                                                             Amberglide PTFE Lubricant
to free seized parts. Too many applications to list, but
more than 40. Features include                                                                                            Ambersil product. Amberglide is a multi-purpose, high
• Lastingly effective on all metals, including aluminium                                                                  grade lubricant with PTFE for long lasting lubrication and
• Safe on paint, rubber and plastics                                                                                      protection in high wear applications
• Penetrates quickly to free rusted or seized parts                                                                       Features include
• Highly effective water displacement properties make                                                                     • Cleans, lubricated, protects and waterproofs
  40+ the perfect damp-start solution                                                                                     • Leaves a durable protective film
• Leaves a protective, non-conductive, lubricating film                                                                   • Significantly increases re-lubrication intervals
  that remains operational at severe sub-zero                                                                             • PTFE lubrication reduces friction and wear
  temperatures                                                                                                            • Wide operating temperature gauge (-10°C to +180°C)
• High corrosion protection, 200 hours in BS 3900 F4 salt                                                                   especially effective as a high-temperature lubricant on
  spray test                                                                                                                fuser units in photocopies
• Treated, freshly machined parts resist 'finger-printing'
  and will stay clean and bright                                                                                            Stock No               Description               Price
• Aerosol is fitted with 360° spray system for all angle                                                                    268272               400 ml Aerosol               9.38
  use, including upside down
• Conforms to IP 178, methods A and B
• Meets industrial specifications; Rolls Royce item 1036J,
  Ford Tox no. 114469, Rail Approved catalogue no.
  27/29302
  Stock No              Description               Price
  268263               400 ml Aerosol              2.97
  268264                5 litre Drum              17.14
  268265                25 litre Drum             58.25
  268266               200 litre Drum            396.10
                                                                                                AMBERSIL LUBRICANTS                                                        137




             AMS4 Silicone Grease                                  Gear and Wire Rope Lubricant                                           Penetrating Oil
Ambersil product. XG250 silicone grease provides a           Ambersil product. A fast drying, high solids lubricant,    Ambersil product. High grade lubricating agent,
smooth non-melting coating that insulates, lubricates,       formulated to provide protection and lubrication to open   formulated to offer quick and easy removal of seized and
seals, preserves and waterproofs. Features include           gears and wire ropes under all operating conditions.       rusted components. Features include
• Insulates high voltage parts against leaking and arcing    Features include                                           • Safe on metals, alloys, paint, rubber, plastics and wood
• Waterproofs electronics in damp or humid conditions        • Adheres strongly to all treated areas                    • Penetrates quickly and deeply to free seized and rusted
• In aviation, seals exposed components against              • Forms a dry, solids enhanced, non-peeling film             components
  moisture ingress and helps to prevent ice build-up         • Tough durable coating resists corrosion and abrasion     • Deposits a specialised corrosion-inhibiting lubricant
• Lubricates slow running gears, door runners, curtain       • Deep penetration for internal protection of wire ropes     that facilitates re-assembly
  side tracks and other moving parts                         • Resists water wash off and dust absorption               • Cleans light surface rust
• Preserves rubber against hardening and cracking            • Resists extremes of temperature                          • Softens and removes carbon deposits
• Assists assembly of tight fitting components               • Can be applied to gears in motion
                                                                                                                          Stock No               Description               Price
• Highly versatile with many other applications              • Suitable for gears at all speeds
• Wide operating temperature range (-50°C to +200°C)         • Pencil jet spray pattern to facilitate accurate            268277               400 ml Aerosol                4.13
• Specifications/Approvals                                     application
  Def Stan 68-69/1
                                                               Stock No              Description               Price
  Mil-S-8660B
  NATO Code S-736, catalogue no. 5970-99-224-4975              268275               400 ml Aerosol              7.53
  RAF-34B
  Stock No               Description               Price
  268273               400 ml Aerosol               7.71




                                                                                                                                   Rust Flash Penetrating Oil
                                                                                                                        Ambersil product. Quick acting penetrating oil with
                                                                                                                        freeze shock effect. This no-compromise product
                                                                                Belt Dressing                           destroys the structure of rust and corrosion by thermal
                                                                                                                        shock, leaving small fissures. The active liquid then
                                                             Ambersil product. Formulated to improve grip on            rapidly penetrates into these fissures to free the seized
                                                             industrial drive belts. Features include                   component. Features include
 Chainspray Chain and Drive Lubricant                        • Adheres strongly to all treated belts                    • Safe on all metals and alloys and most plastics and
                                                             • Prevents slippage on flat, round and V-belts               rubbers
Ambersil product. A high solids, heat dissipating            • Reduces belt squeal                                      • Cracks rust by rapid cooling to -40°C
lubricant, specifically developed for chain lubrication in   • Extends belt life                                        • Frees metal parts seized by dirt, rust, corrosion or
conjunction with the manufacturers of fork lift trucks.                                                                   dried-up greasy deposits
                                                               Stock No              Description               Price
Features include                                                                                                        • Does not contain silicones or acids
• Offers maximum adhesion to chain links                       268276               400 ml Aerosol              5.32    • Fitted with 360°C spray system for all angle use
• Resists throw off and can be applied to running chains                                                                • Supplied with extension tube for access to confined
• Resists water wash off and dust absorption                                                                              areas
• High temperature resistance up to 300°C
• Pencil jet spray pattern to facilitate accurate                                                                         Stock No               Description               Price
  application                                                                                                             268278               500 ml Aerosol                3.93
• Meets military specifications, Def Stan
  D/DQA/TS/CS/217/1
  Stock No               Description               Price
  268274               400 ml Aerosol               7.20
138                          AMBERSIL LUBRICANTS




             Anti-seize Copper Paste                                       Dry PTFE Lubricant                                  Silicone Anti-Stick Lubricant FG
Ambersil product. High temperature, anti-seize lubricant.    Ambersil product. Dry film anti-stick spray. Special resin   Ambersil product. A high purity, highly concentrated,
This product is a soft paste, based on micronised copper     bonded, PTFE system with excellent anti-stick and            silicone lubricant, formulated for use where incidental
powder and synergistic anti-oxidant, anti-corrosion and      lubricating properties. Features include                     food contact may occur. Features include
anti-wear additives suspended in a premium grade stable      • For use where a wet-film lubricant is undesirable          • Odourless, colourless, tasteless and chemically inert
oil. It is an effective anti-seize formulation, preventing   • Forms a dry non-staining film                              • Suitable for applications throughout the food and drinks
metal-to-metal contact, seizing, galling and fretting        • Completely free of silicones and will therefore allow         industry where sticking may present problems, eg
corrosion. Features include                                    decorative treatment of any moulded parts                     conveyors, labelling, packaging and heat sealing.
• Reduces friction and wear, even when the base oil has      • Ideal for use in the food, textile, paper and plastics     • Helps prevent line jams
  evaporated                                                   manufacturing industries where direct contact is           • Inhibits adhesive build up on blades and heat sealers
• Enables easy disassembly of all threaded parts,              involved with surfaces that would be contaminated by       • Can be used as a mould release agent for plastic food
  flanges, press-fits and other metal components, even         wet or silicone-based lubricants                              containers and packaging
  after long operational periods                             • Suitable as an electrical anti-tracking agent              • Operational up to 200°C
• Threaded parts remain in good condition and can be         • Unaffected by water, oil or solvents                       • Approved by the FDA and considered safe for use
  re-used                                                    • Wide operational temperature range (-100°C to +200°C)         where incidental food contact may occur
• Excellent sealing even in corrosive atmospheres                                                                         • WRAS approved product
                                                               Stock No              Description               Price
• High pressure and high temperature resistant;
                                                                                                                            Stock No              Description               Price
  lubricates to 300°C, anti-seize properties to 1100°C         268281               400 ml Aerosol               9.51
• Absorbs disc brake noise                                                                                                  268283               400 ml Aerosol               8.63
• Resistant to hot and cold water
• Lead-free and nickel-free
  Stock No              Description               Price
  268279               400 ml Aerosol               5.16




                                                                            Silicone Lubricant
                                                                                                                                           Silicone Grease
                                                             Ambersil product. A general purpose, medium duty,
                                                             silicone lubricant with excellent anti-stick and slip        Ambersil product. A multi-purpose silicone grease that
                                                             properties. Features include                                 lubricates, insulates and waterproofs. Features include
                                                             • Safe on metals, wood, glass, fabrics, most plastics,       • High insulating properties; ideal for switch contacts,
               Dry Moly Lubricant                               rubbers and most hard surfaces                              ignition systems and EHT connections
                                                             • Odourless, colourless and non-toxic                        • Good water-repellent properties; especially effective
Ambersil product. Resin bonded, high pressure resistant,     • Excellent slip properties on cutting tables, cutting         for protecting coaxial satellite TV dish connectors and
dry film lubricant containing molybdenum disulphide for         knives, blades, chutes and conveyors. Eliminates            other outdoor installations
metal-to-metal lubrication. Features include                    fabric drag                                               • Remains effective for long periods
• For use where a wet-film lubricant is undesirable          • Inhibits adhesive build up on knives and blades            • Reasonable mechanical lubricant
• Particularly effective where high load bearing surface     • Can be used as a mould release agent on plastics and       • Operating temperature range from -50°C to +200°C
  to surface contact is present                                 rubbers
                                                                                                                            Stock No                  Size                  Price
• Prevents seizing, fretting and scuffing, and reduces       • Operating temperature range from -50°C to +200°C
  friction                                                   • WRAS approved product                                        268284                   100 ml                   4.87
• Aides assembly and disassembly of threaded and close                                                                      268285                   1 litre                 47.49
  tolerance components                                         Stock No              Description               Price
• Surface treatment of rolling and sliding bearings            268282               500 ml Aerosol               2.65
  improves running-in
• Resists corrosion and repels water
  Stock No              Description               Price
  268280               400 ml Aerosol               8.86




                                 Trade Counter open 8.15 am - 5.30 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
                                                                                                 AMBERSIL LUBRICANTS                                                        139




                Ambergrease EXL                                                 Chain Lube FG                                              Machine Oil FG
Ambersil product. Long life, high performance, bearing         Ambersil product. Food grade chain and drive lubricant.   Ambersil product. Food grade general purpose lubricant
grease. A premium quality, extremely stable, lithium-          A high performance lubricant based on stable vegetable    and penetrating oil. An extremely efficient and effective
calcium multi-complex soap thickened grease designed           oils and PTFE, specifically formulated to provide         lubricant, based on pharmaceutical grade highly refined
to provide extended re-lubrication intervals in a wide         convenient, effective lubrication and protection in       white oils, specifically formulated for use in food
range of non-arduous and arduous working conditions.           applications where incidental food contact may occur or   processing equipment where incidental food contact may
Features include                                               in applications where a clean lubricant is preferred.     occur. Features include
• Suitable for use in all types of anti-friction sliding       Features include                                          • Safe on metals, most plastics, painted surfaces and
  surfaces and plain bearings                                  • Good adhesion to metal surfaces, even at elevated         wood. If in doubt, on-the-job testing prior to use is
• Greatly extends lubrication intervals ensuring maximum         temperatures and high rpm                                 advised
  cost savings in grease consumption                           • Gentle foaming action limits over application and       • Lubricates efficiently over a wide temperature range -
• Good water washout resistance                                  prevents dripping                                         18°c to +120°C (150°C short time)
• Anti-corrosion agents protect components and extend          • Excellent penetration and lubrication properties        • Does not resinify, allowing longer lubrication intervals
  their working life                                           • Leaves a tenacious, long lasting, lubricant film        • Excellent penetrating ability; loosens rust, scale, dirt
• Wide operating temperature range (-30°C to +150°C)           • Contains PTFE to reduce friction and wear                 and corrosion to free parts and fasteners
• Exceptional load carrying capacity                           • Good load carrying properties                           • Prevents corrosion
  Timken OK Load (IP236): 25 kg                                • Prevents corrosion and resists water wash off           • Creates a water-repellent, colourless film
  Mean Hertz Load: 125 kg                                      • Wide range of applications; chain drives, wire ropes,   • High colour and oxidation stability
• Exceptional EP performance                                     open gears, conveyors, bearings etc                     • Fitted with 360° spray system for all angle use
  Shell Four Ball Weld Load (IP239): 800 kg                    • Operating temperature range from -15°C to +175°C        • Formulated using only food grade acceptable
• NLGI Classification: 2                                       • Virtually odourless and colourless                        components
• Compatible with most other greases                           • Formulated using only food grade acceptable             • Does not contain silicone, nut oils or nut oil derivatives
                                                                 components                                              • NSF H1 registered (no. 137999); meets USDA 1998 H1
  Stock No               Description                Price
                                                               • Does not contain nut oils or nut oil derivatives          guidelines for use as a lubricant with possible
  268286               400 g Cartridge                4.85     • NSF H1 registered (no. 137998); meets USDA 1998 H1        incidental food contact
                                                                 guidelines for use as a lubricant with possible
                                                                                                                           Stock No               Description                Price
                                                                 incidental food contact
                                                                                                                           268290                400 ml Aerosol               6.34
                                                                Stock No              Description              Price
                                                                268289               400 ml Aerosol              8.70




                   Greaseomatic
Ambersil product. Self-contained automatic lubricator
filled with Ambergrease EXL. Features include
• Ensures a regular controlled input of Ambergrease EXL
   for a pre-selected period up to 12 months
• Fits all standard grease nipples
• Exerts constant low pressure to keep contaminants out
   of bearings
• Works in any position, on it's side, upside down or on
   moving parts
• Works by chemical reaction; not subject to mechanical
   or electrical failure
• Cannot create a spark, suitable for use in explosive
   environments such as the offshore oil industry
• Highly durable nylon construction, cannot rust or
   corrode even when submerged underwater
• Ideal for use in arduous, dangerous or difficult to get at
   locations
  Stock No                   Size                   Price
  268287                    120 ml                  27.86
140                            AMBERSIL LUBRICANTS




              Silicone Lubricant FG                                             Ambergrease FG1                                               Ambergrease FG2
Ambersil product. Food grade silicone lubricant. A              Ambersil product. Multi-purpose bearing grease for food       Ambersil product. High temperature resistant, food grade
versatile, non-corrosive product, based on a blend of           processing equipment. Ambergrease FG1 is designed to          grease, Features include
high quality stable silicone oils, that lubricates, protects,   cover a wide range of food grade applications, including      • Suitable for all plain and anti-friction bearings as well
waterproofs and restores a wide range of parts and              extremes of temperature, wet and saturated                      as sliding surfaces
equipment. Features include                                     environments, heavily loaded applications and where           • Greatly reduced formation of carbon deposits
• For use on virtually any part or equipment made of            there is a presence of dust and other contaminants.             associated with many high temperature greases
  metal, plastic, rubber, nylon or wood                         Features include                                              • Provides long term lubrication at high temperatures,
• Provides excellent lubrication, especially between            • Suitable for all plain and anti-friction bearings as well     extending lubrication intervals
  parts made from dissimilar materials eg metal/plastic           as sliding surfaces                                         • Contains PFFE for improved anti-wear performance
  and metal/rubber                                              • Wide performance characteristics enable                     • Good water sealing properties, protecting components
• Ensures superior lubrication of plastics                        standardisation to one product for most food grade            from corrosion in wet environments
• Renovates and protects metals, plastics, rubber and             applications                                                • Does not affect most rubber sealing materials
  wood                                                          • Provides long term lubrication, extending lubrication       • Resistant to a wide range of chemical cleaning
• Excellent release qualities                                     intervals                                                     solutions used in the food industry
• Low surface tension gives better coverage and deeper          • Contains PTFE for improved anti-wear performance            • NGLI Classification: 2
  penetration                                                   • Highly water resistant, providing protection against        • Shell Four Ball Weld Load (IP239): 180 kg
• Highly water resistant and repels water from treated            corrosion                                                   • Operating temperature range from - 50°C to +220°C
  areas                                                         • NGLI Classification: 2                                      • Formulated using only food grade acceptable
• Wide operating temperature range (-40°C to +200°C)            • Contains Extreme Pressure (EP) additives                      components
• Fitted with 360° spray system for all angle use               • Shell Four Ball Weld Load (IP239): 400 kg                   • Does not contain genetically modified ingredients, nut
• Forms a colourless, non-staining film                         • Operating temperature range from -50°C to +165°C              oils or nut oil derivatives
• Does not contain nut oils or nut oil derivatives              • Formulated using only food grade acceptable                 • NSF H1 registered (no. 138265); meets USDA 1998 H1
• NSF H1 registered (no. 138000); meets USDA 1998 H1              components                                                    guidelines for use as a lubricant with possible
  guidelines for use as a lubricant with possible               • Does not contain genetically modified ingredients, nut        incidental food contact
  incidental food contact                                         oils or nut oil derivatives
                                                                                                                                Stock No               Description               Price
                                                                • NSF H1 registered (no. 138264); meets USDA 1998 H1
  Stock No                Description                Price
                                                                  guidelines for use as a lubricant with possible               268293               400 g Cartridge             16.47
  268291                400 ml Aerosol                 5.16       incidental food contact
                                                                  Stock No               Description               Price
                                                                  268292               400 g Cartridge               9.83
                             AMBERSIL LUBRICANTS & ANTI-CORROSION PRODUCTS                                                                                                 141




             Assembly Grease FG                                               Brake Cleaner                                        Zinc-Rich Cold Galvanise
Ambersil food grade product. A white, non-toxic, grease-    Ambersil product. Cleaner/degreaser for brake and           Ambersil product. A unique combination of zinc powders
like compound with a high solids lubricant content for      clutch parts. A non-chlorinated solvent blend, formulated   and resins, formulated to form a high performance zinc-
use as an assembly lubricant and anti-seize compound.       to quickly and safety remove brake fluid, grease, oil and   rich coating that actively fights rust and corrosion by its
Features include                                            hardened deposits from brake and clutch parts. Helps        galvanic properties. Features include
• Use as an assembly lubricant for lubricating bushes,      brakes last longer and perform better. Features include     • Excellent corrosion protection for all ferrous metalwork
   sliding surfaces and small open plastic or metal gears   • Safe on all metals                                        • Ideal touch-up for damaged galvanised surfaces
• Provides protection against scuffing during assembly      • Safe on most plastics, coatings and rubbers (test prior   • Excellent corrosion resistance, even when the coating
• Prevents damage during start up and protects against        to use)                                                      is scratched or damaged
   premature wear during running in, prolonging             • Excellent penetrating, dissolving and degreasing          • Good mechanical resistance due to its excellent
   component life                                             properties                                                   adhesion to the metal
• Resists water washout, extending relubrication            • Evaporates quickly and leaves no residue                  • Fast drying; additional coats can be applied in 10-15
   intervals when used as a service lubricant               • Reduces disc brake squeal and clutch chatter                 minutes
• Prevents seizure of threaded components, enabling         • Can be applied without disassembly                        • Allows spot welding
   quick and easy disassembly                               • Fitted with 360° spray system for all angle use           • No chlorinated solvents, totally lead and chromate free
• Allows reuse of threaded components                       • Supplied with extension tube for hard-to-reach areas      • Zinc 99% pure, content 61% cured film
• Operating temperature range:                                                                                          • Matt, dark grey, weathered appearance
                                                              Stock No              Description               Price
   -30°C to +150°C (as a service lubricant)                                                                             • Suitable as a primer, can be over-coated with acrylic,
   -30°C to +1100°C (as an anti-seize compound)               268296               500 ml Aerosol               3.12       cellulose, alkyd, polyurethane-alkyd and epoxy paint
• Formulated using only food grade acceptable                                                                              systems
   components                                                                                                           • Specifications: NSN 8030-01-120-3553
• Does not contain genetically modified ingredients, nut                                                                                    EN 1461:1999
   oils or nut oil derivatives
                                                                                                                          Stock No               Description               Price
• NSF H1 registered (no. 138266); meets USDA 1998 H1
   guidelines for use as a lubricant with possible                                                                        268298               400 ml Aerosol                5.99
   incidental food contact
 Stock No               Description              Price
 268294                  500 g Tin                13.41




                                                                         Battery Pole Protector
                                                            Ambersil product. A Vaseline based product, used as a
                                                            lubricant and anti-corrosion agent in electro technology.
                                                            Features include
                                                            • Blue colour makes it easy to control the points of
                                                              application                                                    Zinc-Rich Bright Cold Galvanise
                                                            • Quick drying to avoid the adhesion of dust and dirt
                                                            • Dries to a thick pasty protective film                    Ambersil product. A combination of zinc and aluminium
                                                            • Water repellent, it protects contacts against corrosion   powders, resins and additives, formulated to form a
                  FLT Chainlube                             • Prevents sulphating of battery connectors and poles       flexible protective film with a bright glossy appearance.
                                                            • Lubricates heavy duty contacts and sliding or spring      Features include
Ambersil product. Mechanical handling chain lubricant.        loaded contacts                                           • Excellent corrosion protection for all ferrous metalwork
A foaming lubricant specifically formulated for use on      • Suitable for outdoor use                                  • Ideal touch-up for freshly galvanised surfaces
chains, drives and tail-lifts in mechanical handling        • Special formula allows easy dismounting of batteries      • Unique combination of flexibility and hardness
applications. Features include                              • Compatible with most materials                            • Resists rusting peeling and fading
• Offers maximum adhesion to chain links                    • Fitted with a 360° spray system for all angle use         • Adheres well to metal surfaces
• Resists throw off and can be applied to running chains                                                                • Fast drying; additional coats can be applied in 15-20
                                                              Stock No              Description               Price
• Resists water wash off                                                                                                   minutes
• Excellent penetration for complete lubrication              268297               500 ml Aerosol               4.26    • No chlorinated solvents, totally lead and chromate free
• Protects against corrosion                                                                                            • Zinc 99% pure, content 40% cured film
• Operating temperature range:                                                                                          • Bright silver, freshly galvanised appearance, excellent
  up to 200°C continuously                                                                                                 colour match for recently hot-dipped galvanised parts
  200°C to 300°C intermittently                                                                                         • Suitable as a primer, can be over-coated with acrylic,
• Foaming action limits over application                                                                                   cellulose, alkyd, polyurethane-alkyd and epoxy paint
• Lansing Bagnall approved                                                                                                 systems
                                                                                                                        • Suitable as a top coat for cold galvanising spray
 Stock No               Description              Price
                                                                                                                        • Specification: EN 1461: 1999
 268295               500 ml Aerosol               3.31
                                                                                                                          Stock No               Description               Price
                                                                                                                          268299               400 ml Aerosol                6.76
142                          AMBERSIL ANTI-CORROSION & WELDING PRODUCTS




                    Galva Shine                                                    Inox 200                                                   Zinc Primer
Ambersil product. Touch-up paint that combines the          Ambersil product. Protective anti-corrosion paint for         Ambersil brand. Multi-purpose, zinc phosphate primer
lustre look of pieces straight out of the hot-dip           stainless steel surfaces. Paint has the lustre look of        for all metal surfaces. Formulated with modified alkyd
galvanising bath with the convenience of an aerosol can.    stainless steel, providing an attractive coating for          resins, zinc phosphate and other anti-corrosion pigments,
Features include                                            discoloured stainless steel. Features include                 zinc primer fights rust and gives longer lasting interior
• Excellent touch-up for freshly galvanised surfaces        • Covers and protects welding seams on stainless steel        and exterior corrosion resistance to topcoats.
• Aesthetic touch-up after assembly of thin-plated            structures                                                  Features include
  galvanised constructions                                  • Touch-up paint to repair the damaged aspect after           • Slows down rust by inhibition and complex building
• Can also be used to give pieces a new zinc look             assembly of stainless steel structures                      • Provides better topcoat adhesion and coverage
• Unique combination of flexibility and hardness            • Provides a closed durable film with a unique                • Retains topcoat colour brilliance
• Provides a closed tough durable coat that keeps it          combination of flexibility and hardness                     • Grey colour is suitable even for light topcoat colours
  lustre through time                                       • Excellent adhesion to stainless steel                       • Repaintable with all one-component paints
• Adheres extremely well to galvanised surfaces             • Fast drying; dry-to-touch after 10 minutes                  • Strong adhesion to degreased, bare metal surfaces
• Fast drying; additional coats can be applied in 5-10      • Totally lead free                                           • Surface preparation may be needed for oxidised or
  minutes                                                   • Protective film contains the pigments of stainless steel,     galvanised surfaces
• No chlorinated solvents, totally lead and chromate free     giving its appearance the lustre look of polished           • Saves pre-paint time by filling hairline cracks and other
• Bright, glossy, freshly galvanised appearance               stainless steel                                               slight imperfections
• Aerosol uses LPG propellant for controlled spray and      • Aerosol uses LPG propellant for controlled spray and        • Fast drying, repaintable after 1 hour (24 hours for best
  film properties                                             film properties                                               results)
                                                                                                                          • No chlorinated or aromatic solvents, totally lead and
  Stock No              Description              Price        Stock No               Description               Price
                                                                                                                            chromate free
  268300               400 ml Aerosol              5.07       268305               400 ml Aerosol                7.54     • Aerosol uses dimethylether (DME) propellant for
                                                                                                                            controlled spray and film properties
                                                                                                                          • Salt spray test (ASTM B117) : <500 hours @ 35 µm film
                                                                                                                            thickness
                                                                                                                            Stock No               Description               Price
                                                                                                                            268307               400 ml Aerosol               4.86




               Corrosion Inhibitor                                              Alu Hi-Temp
Ambersil product. Corrosion Inhibitor forms a clear         Ambersil product. Protective anti-corrosion paint, based
protective coating that provides long lasting protection    on silicone resins and active aluminium pigments, for
against rust and corrosion. Principally designed for        high temperature applications. Features include
indoor use, it will also provide short term protection to   • Hard durable finish that will not chip, peel or burn off
components stored outdoors. Features include                • High thermal stability; resists temperatures up to 600°C                 Flaw Detector Cleaner
• Forms a continuous homogeneous, soft, flexible film       • Very good resistance to temperature fluctuations
• Film will not harden or crack; total protection assured   • Good weather stability, although some loss of gloss         Ambersil product. Powerful solvent cleaner/degreaser
• Displaces surface moisture on application; no need for      after extended exposure                                     and excess penetrant remover for the non-destructive
  a separate de-watering fluid                              • Excellent coverage                                          detection of open-to-surface defects by liquid penetrant
• Suitable for the protection of ferrous metals in highly   • Fast drying; additional coats can be applied in 15-30       inspection. Features include
  humid conditions                                            minutes                                                     • Quickly dissolves grease, oil, lubricants, tar and
• Film allows subsequent handling and resists acid finger   • No chlorinated or aromatic solvents, totally lead and         adhesives
  printing                                                    chromate free                                               • Effective wash-away of contaminants and coloured
• Will not stain or mark components                         • Use on stoves, heaters, kilns, incinerators, chimneys,        penetrant
• Suitable as an anti-seize coating on bolts, hinges,         exhaust manifolds, engines, ovens and steam pipes           • Stable, non-staining and non-corrosive
  fixings and moving parts                                  • Matt aluminium appearance                                   • Safe on most plastics, coatings and rubbers (test prior
• Specifications/Approvals                                  • Aerosol uses dimethylether (DME) propellant for               to use)
  Protection against corrosion:                               controlled spray and film properties                        • Fast evaporation
  MIL-RF-16173E (Class 1, Grade 2)                          • Heat resistance ASTM D-2485-68                              • Leaves no residue
  Water displacing: Passes IP 178, Method B                   Method 1 (Continuous) : 600°C                               • Low odour
  Salt spray test (ASTM B117):                                Method 2 (Cycling)        : 635°C                           • Free of chlorinated solvents
  250 hours min. protection @ 18 µm film thickness                                                                        • Specifications/Approvals
                                                              Stock No               Description               Price
                                                                                                                            EN ISO 3452-2:2000
  Stock No              Description              Price
                                                              268306               400 ml Aerosol                6.42       RCC-M Tome III Chap MC4200
  268301               400 ml Aerosol              5.58                                                                     ASME Code Section V
  268302                5 litre Drum              29.50
                                                                                                                            Stock No               Description               Price
  268303                25 litre Drum            132.67
  268304               200 litre Drum            862.40                                                                     268308               400 ml Aerosol               4.64
                                            AMBERSIL WELDING & SPECIALITY PRODUCTS                                                                                     143




           Flaw Detector Penetrant                                      Freezer Fault Detector                                           Leak Detector
Ambersil product. Liquid penetrant for the quick and       Ambersil product. A rapid cooling agent for instant fault   Ambersil product. A viscous gel, formulated for quick
easy visual non-destructive detection of open-to-surface   finding on electronic equipment. The product is sprayed     and easy on-site detection of gas and air leaks.
defects in surfaces components and structures.             directly onto the suspect component. If the fault           Features include
Features include                                           disappears, this confirms that the component is defective   • Stable gel formulation; does not break down in use
• Inspections are carried out quickly and easily with      and should be replaced. Features include                    • Viscous formulation, allowing use on vertical and
  ready-to-use aerosols                                    • Reduces component temperatures to -50°C                     undercut surfaces without excessive run-off or over
• Low surface tension penetrant that quickly finds its     • Non-flammable, low toxicity and odourless                   application
  way into the tiniest defect                              • Instant fault finder for use on PCBs, transistors,        • Non-flammable and completely odourless
• Coloured with highly visible dark red dye                   resistors, condensers and intermittent dry joint         • Non-staining and non-corrosive
• Sensitive and reliable test method                          connectors                                               • Safe on plastics and all metals
• Economical technology with no need for expensive         • Cools thermally sensitive parts during soldering or       • Safe on compressed air and most industrial gases
  advanced equipment                                          calibration                                              • Highlights all leaks even under low pressure. Bubbles
• Widely applicable, regardless of the nature of the       • Can be used for shrink fitting close tolerance metal        will appear at the precise location of the leak
  materials or the shape of the objects. Can be applied       assemblies                                               • Removes the need for sophisticated electronic
  to the underside of components or structures             • Embrittles sticky substances (eg chewing gum) to            equipment and immersion tanks
• Specifications/Approvals                                    facilitate their removal
                                                                                                                        Stock No              Description              Price
  EN ISO 3452-2:2000                                       • Formulated without the use of CFCs or HCFCs
  RCC-M Tome III Chap MC4200                               • Specifications/Approvals                                   268313                 5 litre Drum             23.49
  ASME Code Section V                                         British Rail Catalogue No. 7/20505
 Stock No               Description              Price       Stock No              Description              Price
 268309               400 ml Aerosol              5.99       268311              400 ml Aerosol               7.92




          Flaw Detector Developer                                            Leak Detector
Ambersil product. Fast drying developer for the quick      Ambersil product. A water based formulation for quick
and easy visual non-destructive detection of open-to-      and easy on-site detection of gas and air leaks.
surface defects in surfaces components and structures.     Features include
Features include                                           • Stable foam formulation; does not break down in use
• Dries quickly to form a white powder coating             • Safe water based formulation; no oils silicones or
• No run off                                                 harmful solvents, no run-off hazard
• The developer acts like a blotter and draws penetrant    • Non-flammable and completely odourless
  out of the surface imperfections                         • Non-staining and non-corrosive
• Allows effective bleed through penetrating dye           • Safe on plastics and all metals
• The white powder coating is an excellent contract        • Safe on compressed air and most industrial gases
  medium, offering maximum visibility against the red      • Highlights all leaks even under low pressure. Bubbles
  penetrant fluid                                            will appear at the precise location of the leak
• The speed of appearance, the shape and the               • Removes the need for sophisticated electronic
  dimensions of the red lines and dots can give              equipment and immersion tanks
  information about the nature of the defects              • Fitted with a 360° spray system for all angle use
• Easily removed after inspection                          • Specifications/Approvals
• Specifications/Approvals                                   DIN 30657
  EN ISO 3452-2: 2000                                        DVGW registration no. NG 5170 AS 0069
  RCC-M Tome III Chap MC4200                                 MIL-L-25567
  ASME Code Section V
                                                             Stock No              Description              Price
 Stock No               Description              Price
                                                             268312              400 ml Aerosol               4.71
 268310               400 ml Aerosol              5.93
144                          AMBERSIL LUBRICANTS, WELDING & RELEASE AGENT PRODUCTS




       Tufcut Metal Cutting Lubricant                                   Bioweld Spatter Release                                      Easy Weld Spatter Release
Ambersil product. Instant, ready-to-use, metal cutting       Ambersil product. Unique water based spatter release         Ambersil product. Spatter release agent based on
lubricant for faster production and improved surface         agent. Prevents spatter adhesion on welding equipment,       biodegradable oil. Quick and easy way to prevent
finish. A must use product where right first time results    workpieces, surfaces, jigs and surrounding areas             adherence of spatter to metal surfaces. When sprayed
are essential. Features include                              Features include                                             into a welding nozzle, it can aid welding performance.
• Provides an extreme-pressure resistant tenacious film      • Safe in use; contains no harmful solvents; silicones or    Ideal for use in professional workshops.
   between the tool cutting and the workpiece, ensuring        mineral oils                                               Features include
   an excellent surface finish and an extended tool life     • Non-flammable and completely odourless                     • Non-silicone, heat resistant barrier
• Dissipates heat and allows heavier close tolerance cuts    • Available as aerosol spray or bulk liquid                  • Long term, anti-adherent effect
• Excellent results across a wide range of tough metals,     • Aerosol has fine spray pattern that ensures total          • Easy removal of welding spatter by brushing or wiping
   including titanium, stainless steel, high tensile, high     control and economical coverage                            • Economical, due to its thin film performance
   speed and high carbon steels                              • Contains a rust inhibiting agent                           • Odourless
• Outstanding performance for turning, drilling, reaming,    • After welding, the film is easily wiped away and leaves    • Contains effective corrosion inhibitors
   tapping and thread cutting                                  no residues. Post welding operations (eg. Painting and     • Extends nozzle life
• Handy pack sizes allow application direct to the cutting     plating) can then be carried out without interference      • Improves arc stability, ensuring free gas flow
   edge                                                                                                                   • Prevents obstruction of automatic and semi-automatic
                                                               Stock No              Description               Price
• Available as aerosol spray, aerosol foam, pouring                                                                         welding equipment
   bottle, liquid bulb for automatic feed systems and hand     268319               400 ml Aerosol               2.48     • Hydrocarbon propellant
   applied paste                                               268320                5 litre Drum               13.33     • Fitted with a 360° spray system for all angle use
• Foaming lubricant is specifically formulated for             268321                25 litre Drum              43.46     • Residual film may be removed by Ambersil Industrial
   application to vertical surfaces without excessive loss                                                                  Degreaser or Ambersil Fast Dry Degreaser
   of lubricant from the work piece. It can also be used
   for close tolerance machining, as the foam allows                                                                        Stock No               Description               Price
   longer contact time and increased lubricant penetration                                                                  268323               400 ml Aerosol                2.29

Tufcut Liquids
  Stock No              Description               Price
  268314            400 ml Aerosol Spray            8.15
  268315            300 ml Aerosol Foam             8.91
  268316                350 ml Bottle               8.95
  268317                 5 litre Drum              51.05

Tufcut Cutting Compound
  Stock No              Description               Price
  268318                  500 g Tin                 7.06




                                                                              Spatter Release
                                                             Ambersil product. Traditional solvent based spatter
                                                             release agent. Prevents spatter adhesion on welding
                                                             equipment, workpieces, surfaces, jigs and surrounding          Formula One Silicone Release Agent
                                                             areas. Features include
                                                             • Contains no silicones                                      Ambersil product. A multi-purpose, heavy duty, mould
                                                             • Non-flammable                                              release agent, based on a high percentage silicone
                                                             • Economical as only a light even film needs to be applied   formulation dissolved in a blend of solvents.
                                                             • After welding, the film is easily wiped away and leaves    Features include
                                                               no residues. Post welding operations (eg painting and      • Provides a heavy duty film for the release of stubborn
                                                               plating) can then be carried out without interference        and hard-to-release plastic and rubber parts
                                                                                                                          • Formulated for injection moulding, but is also highly
                                                               Stock No              Description               Price        effective in many other moulding and forming
                                                               268322               400 ml Aerosol               1.93       processes
                                                                                                                          • Will not build up in the mould and helps to improve
                                                                                                                            surface finish, reduce rejects and increase production
                                                                                                                          • Also useful as an anti-stick agent in the food, textiles,
                                                                                                                            foam converting, printing and shoe industries
                                                                                                                          • Operational up to 200°C (High temperature version also
                                                                                                                            available, Formula One HT, operational up to 300°C)
                                                                                                                          • Contains silicone, so may be unsuitable where
                                                                                                                            decorative work (eg painting and plating) is necessary
                                                                                                                            on the moulded part
                                                                                                                            Stock No               Description               Price
                                                                                                                            268324               400 ml Aerosol                7.95
                                                               For ease and accuracy when placing                           268325                5 litre Drum                25.28
                                                                                                                            268326                25 litre Drum              101.10
                                                                orders please use our stock number                          268327               200 litre Drum              687.53
                                                                                     AMBERSIL RELEASE AGENTS                                                                145




  Formula Six Silicone Release Agent                                 DP200 Silicone Release Agent                          Formula Seven Non-Silicone Release Agent
Ambersil product. A multi-purpose, medium duty, mould         Ambersil product. A specialist, air curing, long lasting,    Ambersil product. A heavy duty, wet film, non-silicone,
release agent, based on silicones dissolved in a blend of     semi-permanent, mould release agent, based on a high         mould release agent, based on a blend of synthetic
solvents. Features include                                    percentage of silicone resins. Features include              materials and solvents. Features include
• Provides a medium duty film for the release of all          • Cures on exposure to air to form a highly durable, dry,    • Provides a heavy duty film with excellent release
  thermoplastics and many types of rubber                       release film                                                 characteristics on a wide range of thermoplastics and
• Suitable for injection moulding, compression moulding,      • Formulated for moulding processes where the use of           rubbers
  vacuum forming and many other moulding and forming            'free' silicone can cause cracking                         • Particularly effective in injection moulding and vacuum
  processes                                                   • Effective release agent for rotational moulding. Also        forming processes
• Will not build up in the mould and helps to improve           useful for moulding processes and materials where a        • Will not build up in the mould and helps to improve
  surface finish, reduce rejects and increase production        durable, long lasting release film is required               surface finish, reduce rejects and increase production
• Also useful as an anti-stick agent in the textiles, foam    • Suitable for many polymer types, natural and synthetic     • Clear and colourless
  converting, printing and shoe industries                      rubbers, and rotational grades of polyethylene             • Operational up to 170°C
• Operational up to 200°C                                     • Can be used as a mould seal or as a base coat for the      • Completely free of silicones and therefore allows post-
• Aerosol fitted with 360° spray system for all angle use       subsequent application of other Ambersil mould               moulding treatments such as painting, printing and
• Recognised by Underwriters Laboratories Inc                   release agents                                               gluing
• Contains silicone, so may be unsuitable where               • Operational up to 200°C                                    • Recognised by Underwriters Laboratories Inc
  decorative work (eg painting and plating) is necessary      • Cures in approximately 10 minutes at room
                                                                                                                             Stock No              Description               Price
  on the moulded part                                           temperature; approximately 6 minutes by heating to 110°C
                                                              • Specifications/Approvals                                     268336               400 ml Aerosol              6.77
  Stock No               Description                Price
                                                                Rolls Royce Item 116061, Approved Supplier 176               268337                25 litre Drum            150.34
  268328               400 ml Aerosol                6.30                                                                    268338               200 litre Drum           1022.26
                                                                Stock No               Description               Price
  268329                25 litre Drum               79.73
  268330               200 litre Drum              542.18       268332               400 ml Aerosol              10.53




                                                                                                                             Formula Ten Non-Silicone Release Agent
 Formula Eight Silicone Release Agent                          Formula Five Non-Silicone Release Agent                     Ambersil product. A dry film, non-silicone, mould release
                                                                                                                           agent, based on a blend fluorochemical actives and
Ambersil product. A multi-purpose, light duty, mould          Ambersil product. A light duty, dry film, non-silicone,      solvents. Features include
release agent, based on silicones dissolved in a blend of     mould release agent, based on a blend of waxes, esters       • Effective release agent for thermosetting plastics,
solvents. Features include                                    and solvents. Features include                                 polyurethane, epoxy resins and polyester
• Provides a light duty film for the release of fine detail   • Provides a light duty film with excellent release          • Will not build up in the mould and helps to improve
  plastic and rubber parts                                      characteristics for all types of thermoplastics, some        surface finish, reduce rejects and increase production
• Suitable for injection moulding, compression moulding,        thermosetting plastics, silicone rubber and many other     • Clear and colourless
  vacuum forming and many other moulding and forming            types of rubber                                            • Operational up to 180°C
  processes                                                   • Effective release agent for fine detail plastic and        • Completely free of silicones and therefore allows post-
• Effective and economical solution to many release             rubber parts in injection moulding and vacuum forming,       moulding treatments such as printing, painting and
  problems                                                      and plaster of Paris, GRP and silicone rubber in other       gluing
• Will not build up in the mould and helps to improve           moulding processes
                                                                                                                             Stock No              Description               Price
  surface finish, reduce rejects and increase production      • Will not build up in the mould and helps to improve
• Also useful as an anti-stick agent in the textiles, foam      surface finish, reduce rejects and increase production       268339               400 ml Aerosol              7.33
  converting, shoe and foundry industries                     • Also useful as an anti-stick agent in the textile, foam
• Operational up to 200°C                                       converting, printing and shoe industries
• Recognised by Underwriters Laboratories Inc                 • Operational up to 150°C
• Contains silicone, so may be unsuitable where               • Completely free of silicones and therefore allows post-
  decorative work (eg painting and plating) is necessary        moulding treatments such as painting, printing and
  on the moulded part                                           gluing
                                                              • Specifications/Approvals
  Stock No               Description                Price
                                                                Recognises by Underwriters Laboratories Inc
  268331               400 ml Aerosol                4.95       Meets WL 94V-0, 94V-1, 94V-2, 94HB
                                                                Stock No               Description               Price
                                                                268333               400 ml Aerosol               6.29
                                                                268334                25 litre Drum             139.56
                                                                268335               200 litre Drum             953.63
146                           AMBERSIL MOULD PROTECTION & LUBRICANTS




                 Mould Protective                                          Green Mould Protective                                           Polymer Remover
Ambersil product. A visible, non-silicone, anti-corrosion,    Ambersil product. A highly visible, non-silicone, anti-       Ambersil product. Effective and powerful solvent blend,
protective coating for all types of mould tools, and other    corrosion, protective coating for all types of mould tools,   developed for use on heavily soiled moulds and dies to
metallic parts and components. Features include               and other metallic parts and components.                      remove a variety of soiled deposits. Features include
• Durable protective coating for tools in storage             Features include                                              • Removes plastics, rubbers and resin deposits, including
• Tracer dye ensures that total coverage of the mould is      • Durable protective coating for tools in storage               ABS, acetals, acylates, PVC, uncured epoxy resins,
  assured                                                     • Highly visible green tracer dye allows easy visual            nylons, polyamides, polystyrenes, rubbers, silicone
• Resists corrosion; the mould tool remains in top              identification and ensures complete coverage and thus         resins, cellulose resins and alkyd resins
  condition                                                     total protection                                            • Controlled evaporation rate for maximum efficiency
• Displaces and repels moisture                               • Resists corrosion: the mould tool remains in top            • Evaporates completely to leave a clean dry surface
• Will not harden or crack                                      condition
                                                                                                                              Stock No              Description               Price
• Allows handling, and resists acid finger marking            • Displaces and repels moisture
• Easily removed when production recommences                  • Resists the effects of high humidity                          268346               400 ml Aerosol              8.70
• Specifications/Approvals                                    • Viscous consistency prevents run-off                          268347                 5 litre Drum             49.55
  Corrosion protection (IP178, Method A) : No rusting or      • Film will not penetrate or creep into the mould tool          268348                25 litre Drum            193.18
  pitting                                                     • Will not harden or crack
  Water displacing (IP178, Method B) : Saline solution is     • Allows handling, and resists acid finger marking
  completely displaced from surface of metal                  • Easily removed when production recommences
  Stock No               Description                Price       Stock No               Description               Price
  268340               400 mm Aerosol                6.97       268342               400 ml Aerosol                8.86




                                                                                                                                         Ejector Pin Lubricant
                                                                                                                            Ambersil product. Clear, non-staining lubricant,
                                                                                                                            formulated from a unique blend of highly refined mineral
                                                                                                                            oils, extreme pressure additives, and de-watering and
                                                                                                                            anti-corrosion agents. Features include
             Clear Mould Protective                                             Mould Cleaner                               • Offers outstanding performance under conditions of
                                                                                                                              extreme pressure and loading on all moving and
Ambersil product. A transparent, non-silicone, anti-          Ambersil product. Powerful solvent cleaner that removes         mechanical parts
corrosion, protective coating for all types of mould tools,   a wide range of soiling from mould tools, extrusion dies      • Suitable for all close tolerance applications, including
and other metallic parts and components.                      and other metal surfaces. Features include                      conditions where contamination could cause a problem
Features include                                              • Quickly and easily removes oil, grease, old protective      • Extremely tenacious; will not fling off moving parts
• Durable protective coating for tools in storage               films, and silicone and non-silicone release agents         • Displaces moisture and protects against corrosion
• Clear film will not stain or mark the moulding,             • Evaporates completely to leave a clean dry surface          • Operational up to 120°C
  recommended for use with clear or white polymers            • Special formulation permits use on hot production
• Resists corrosion; the mould tool remains in top              tooling without excessive solvent loss by evaporation         Stock No              Description               Price
  condition                                                                                                                   268349               400 ml Aerosol              7.78
• Displaces and repels moisture                                Stock No                Description               Price
• Film will not penetrate or creep into the mould tool         268343                400 ml Aerosol               5.44
• Will not harden or crack                                     268344                 5 Litre Drum               31.03
• Allows handling, and resists acid finger marking             268345                 25 Litre Drum             120.98
• Easily removed when production recommences
  Stock No               Description                Price
  268341                400 ml Aerosol               7.93




           Prices shown are indicative prices. For current prices call 01224 620944
                              or email: sales@gibbtools.co.uk
                                                                                                     MOLYSLIP PRODUCTS                                                     147




      Copaslip Anti-Seize Compound                                   Molyslip ADF Air Drying Film                        Molyslip MCC Metal Working Compound
Molyslip Atlantic product. Copaslip® is the original anti-   Molyslip Atlantic product. Pure Molybdenum Disulphide      Molyslip Atlantic product. High performance, low melting
seize/assembly compound. Contains copper and                 in an air drying bonding resinate. Features include        point, metalworking compound for use on all metals.
polybutene and is a premium non-melt base with               • Forms a dry lubricating film                             Features include
corrosion and oxidation inhibitors. Features include         • For use where a wet film lubricant is undesirable        • Based on extreme pressure additives fortified with
• Protects against seizure of metal parts, even under          (e.g. dust contamination)                                  Molybdenum Disulphide to provide excellent extreme
  extreme conditions of temperature and pressure             • Ideal for pre-assembly treatment of parts to prevent       pressure performance and lubricity
• Effective even in corrosive atmospheres                      seizure, galling and scuffing                            • For use with all metals, including the more difficult
• Ensures easy dismantling threaded fasteners                                                                             metals and alloys such as titanium and nimonics
                                                               Stock No              Description               Price
• Lead free                                                                                                             • Improves cutting performance, providing a better
• Operational up to 1100°C                                     262354               400 ml Aerosol               9.28     surface finish. Reduced friction lengthens tool life and
                                                               262355                 5 Litre Can              129.75     enables a higher rate of metal removal
  Stock No               Description               Price
                                                                                                                        • Primary uses include drilling, tapping, sawing,
  262348                 100 g Tube                 2.51                                                                  broaching and all thread cutting operations. May also
  262349               400 ml Aerosol               5.61                                                                  be used for pressing, drawing and extruding
  262350                  500 g Tin                 6.38
                                                                                                                          Stock No               Description                Price
  262351                  5 kg Tin                 48.23
                                                                                                                          262310                   450 g Tin                 5.19
                                                                                                                          262311                    3 kg Tin                25.52




                                                                   Molyslip AS40 Anti-Scuff Paste
                                                             Molyslip Atlantic product. Anti-scuff, bedding-in paste.
                                                             Galled lubricating oil with a high proportion of
                                                             Molybdenum Disulphide. Contains 40% Molybdenum
      Alumslip Anti-Seize Compound                           Disulphide with graphite and corrosion and oxidation
                                                             inhibitors
Molyslip Atlantic product. Alumslip® is an aluminium
                                                               Stock No              Description               Price        Molyslip Metal Working Lubricant
based anti-seize compound, developed for the same
applications as Copaslip®. Features include                    262356                  500 g Tin                24.40   Molysip Atlantic product. Concentrated metalworking
• Protects against seizure of metal parts, even under          262357                  5 kg Tin                243.50   fluid containing a unique oil-soluble molybdenum
  extreme conditions of temperature and pressure                                                                        compound and the most effective extreme pressure
• Effective even in corrosive atmospheres                                                                               anti-weld additives. Features include
• Ensures easy dismantling of threaded fasteners                                                                        • High performance lubricant that combats the extreme
• Copper free                                                                                                              pressures developed during metalworking
• Operational up to 1100°C                                                                                              • For use with all metals, including stainless steel and
                                                                                                                           light alloys which are prone to surface welding or
  Stock No               Description               Price
                                                                                                                           pick-up on the tool
  262352                  500 g Tin                 6.38                                                                • Lubricates, reducing friction, heat and distortion of the
  262353                  5 kg Tin                 51.44                                                                   work
                                                                                                                        • Lengthens tool life, improves surface finish and
                                                                                                                           increases dimensional accuracy
                                                                                                                        • Uses include tapping, drilling, threading, reaming,
                                                                                                                           drawing, pressing, extruding and forming

                                                                                                                        MWF Metal Working Fluid
                                                                                                                          Stock No               Description                Price
                                                                                                                          262320                 350 ml Bottle               5.27
                                                                                                                          262321                  5 litre Flask             36.80
                                                                                                                          262322                 25 litre Drum             165.00

                                                                                                                        MWS Metal Working Spray
                                                                                                                          Stock No               Description                Price
                                                                                                                          262323                400 ml Aerosol               5.70
148                            MOLYSLIP PRODUCTS & ROCOL LUBRICANTS




 Molyslip MEP Extreme Pressure Additive                           Molyslip MTG Machine Tool Grease                                           Wire Rope Fluid
Molyslip Atlantic product. Additive for soluble cutting         Molyslip Atlantic product. Lithium based, high melt point   Rocol Wire Rope Fluid is designed to penetrate to the
oils to improve lubricating and anti-weld properties.           grease for all lubrication points on machine tools.         wire rope core, protecting and lubricating inside and out
• Contains a stable soluble molybdenum compound and             Features include                                            to extend safe working life, reducing unplanned down
  high proportions of emulsifying agents and anti-weld          • Formulated to provide high load bearing capacity and      time and replacement costs. Features include
  additives                                                       prolonged lubrication intervals                           • Contains moly and other anti-wear additives in a
• Stabilises the emulsion, prolonging it's life and             • Contains Molybdenum Disulphide and extreme                  solvent base
  ensuring uniform performance                                    pressure additives for best performance in arduous        • Evaporates to leave a long lasting protective film
• Contains an effective biocide to prevent liberation of          working conditions                                        • Repels water and protects against corrosion, even in
  hydrogen sulphide with its objectionable smell                • Anti-corrosion agents protect components and extend         extreme environments
• Can be used as a super EP soluble oil in its own right          their working life                                        • Suitable for application to wet ropes
                                                                • Resistant to water and soluble oil dilutions              • Can be applied by swab, brush or compressed air spray
  Stock No                Description                Price
                                                                                                                            • Temperature range: -30°C to +100°C
                                                                  Stock No              Description               Price
  262324                  5 litre Flask              34.37
                                                                                                                              Stock No                  Size                  Price
  262325                 25 litre Drum              159.30        262326                  450 g Tin                5.36
                                                                  262327                  5 kg Tin                46.80       268602                   5 litres               81.73
                                                                                                                              268603                  20 litres              280.32




    Molyslip MSO Soluble Cutting Oil
                                                                              Wire Rope Dressing
Molyslip Atlantic product. Reliable general purpose                                                                                         Wire Rope Spray
soluble cutting oil of the milky emulsion type.                 Rocol Wire Rope Dressing is designed to penetrate to the
Features include                                                wire rope core, protecting and lubricating inside and out   Rocol Wire Rope Spray is designed to penetrate to the
• Consists of a blend of solvent refined mineral oils and       to extend safe working life, reducing unplanned down        wire rope core, protecting and lubricating inside and out
  performance enhancers with emulsifiers and corrosion          time and replacement costs. Features include                to extend safe working life, reducing unplanned down
  inhibitors                                                    • Tenacious, semi-fluid, non-melting grease, containing     time and replacement costs. Features include
• Dilution is 1 part oil to 10-30 parts water, for use in all     molybdenum disulphide (moly)                              Aerosol applied wire rope lubricant containing moly and
  operations that require a general purpose cutting oil         • Penetrates to the rope core providing excellent           other anti-wear additives in a solvent base
• Use in all manual and re-circulating cutting systems            lubricity and high load carrying capabilities             Evaporates to leave a long lasting protective film
• Practically odourless                                         • Repels water and protects against corrosion, even in      Repels water and protects against corrosion, even in
• MSO Clear is available for operations requiring good            sea water environments                                    extreme environments
  visibility                                                    • Easily applied by brush, even at low temperatures         Temperature range: -30°C to +100°C
  Stock No                Description                Price      • Use on all non-friction drive type ropes in hostile         Stock No                  Size                  Price
                                                                  environments, including cranes derricks and
  262340                  5 litre Flask              21.76        submersible platforms                                       268604               400 ml Aerosol             14.20
  262341                 25 litre Drum               93.15      • Temperature range: -30°C to +100°C
                                                                  Stock No                  Size                  Price
                                                                  268600                   4 kg                   63.57
                                                                  268601                   18 kg                 267.45




                                   Phone Lines open 7.30 am - 6.00 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
                                                                                                        ROCOL LUBRICANTS                                                   149




   Biogen Biodegradable Rope Guard                                         Chain and Drive Fluid                                    Chainguard Hi-Load Spray
Rocol Biogen Rope Guard is designed to penetrate to the       Rocol Chain and Drive Fluid is a bulk fluid, general       Rocol Hi-load Spray is a heavy duty, aerosol applied,
wire rope core, protecting and lubricating inside and out     purpose, drive and conveyor chain lubricant, designed to   drive and conveyor chain lubricant. Features include
to extend safe working life, reducing unplanned down          reduce chain wear and prolong chain life.                  • Rapidly penetrates chain links and pins
town and replacement costs. Features include                  Features include                                           • Thin film lubricant with moly for good load carrying
• Tenacious, solvent free, semi-fluid rope dressing           • Rapidly penetrates chain links and pins                    capabilities
• Non-toxic and biodegradable                                 • Provides long term wet film lubrication, extending       • Water repellent, ideal for humid and wet working
• Provides the same cost effective, high performance            lubrication intervals and reducing lubricant usage         conditions
  levels and long life associated with all Rocol products     • Water resistant, good for humid and wet working          • Lubricates and protects chains and drive systems
• Repels water, making it particularly suitable for areas       conditions                                                 operating under heavy loads or in difficult conditions
  of extreme water contamination                              • Good load carrying properties                            • Ideal for fork lift truck chains
• Temperature range: -30°C to +100°C                          • Excellent corrosion protection                           • Temperature range: -30°C to +180°C
• Assessed to CEC L-33-A-93 testing procedure                 • Temperature range: -15°C to +150°C
                                                                                                                           Stock No                  Size                   Price
  Stock No                  Size                   Price       Stock No                   Size                 Price
                                                                                                                           268611               300 ml Aerosol              12.03
  268605                    18 kg                 339.20       268607                   5 litres               61.33
                                                               268608                   20 litres             241.53




                                                                                                                            Tufgear Spray Open Gear Lubricant
             Chain and Drive Spray
                                                                               Chainguard 230                            Rocol Tufgear Spray is designed to protect against
Rocol Chain and Drive Spray is a multi-purpose, aerosol                                                                  corrosion and reduce friction and wear on open gear
applied, drive and conveyor chain lubricant.                  Rocol Chainguard 230 is a special purpose chain            teeth, increasing efficiency and prolonging gear life.
Features include                                              lubricant, designed to reduce chain wear and prolong       Features include
• Rapidly penetrates chain links and pins to ensure           chain life n high temperature environments.                • Provides a thin film with good load carrying capabilities
  trouble-free operation, cutting expensive downtime and      Features include                                           • Highly tenacious, will not throw off in operation
  productivity loss                                           • Rapidly penetrates chain links and pins                  • Repels water and protects against corrosion
• Provides a thin film of temperature resistant mineral oil   • Provides long term wet film lubrication                  • Use on small gear trains, gears on overhead equipment
• Applied film has good adhesion, reducing dripping and       • Use on chains running continuously at temperatures up      and for application through guards onto moving gears
  throw off                                                     to 230°C                                                 • Bitumen free
• Water repellent, ideal for humid and wet working            • Suitable for drying machines, bakery ovens and paint     • Temperature range: -10°C to +100°C
  conditions                                                    stoving ovens
                                                              • Suitable for chains operating under heavy loads            Stock No                  Size                   Price
• Excellent corrosion protection
• Use for the lubrication of drive and conveyor chains not    • Temperature range: +10°C to +230°C                         268612               400 ml Aerosol              16.16
  fitted with automatic lubrication systems                    Stock No                   Size                 Price
• Temperature range: -30°C to +150°C
                                                               268609                   5 litres              129.76
  Stock No                  Size                   Price       268610                   20 litres             450.25
  268606               300 ml Aerosol              10.40
150                           ROCOL LUBRICANTS




Tufgear Universal Open Gear Lubricant                                           Dry Moly Spray                                                 Dry Moly Paste
Rocol Tufgear Universal has been developed to deal with       Rocol Dry Moly Spray is an aerosol applied dry film            Rocol Dry Moly Paste is a soft lubricating paste with high
the loads found in the largest gears and withstand the        lubricant of resin bonded molybdenum disulphate.               moly content which can be rubbed or burnished on to the
aggressive environments within which they operate.            Features include                                               surface to give a dry bonded film. Features include
Features include                                              • For use where conventional lubricants fail or cause          • For use where conventional lubricants fail or cause
• Organically modified clay thickened grease, based on a        unacceptable contamination                                     unacceptable contamination
  blend of high viscosity oils and high load carrying solid   • Exceptionally high load carrying strength                    • Exceptionally high load carrying strength
  lubricants                                                  • Withstands high temperatures                                 • Withstands high temperatures
• Water resistant, will protect gears that are exposed to     • Use as a dry film lubricant on slides, gears and plain       • Use as a dry film lubricant on slides, plain bearings,
  strong underwater currents                                    bearings                                                       cams and valves
• Excellent corrosion protection                              • Aids assembly and disassembly of threaded and close          • Assists assembly and disassembly of threaded and
• Suitable for all types and sizes of open gears                tolerance components; prevents galling, pick-up and            close tolerance components; prevents galling and
• Bitumen free                                                  seizure.                                                       seizure
• Temperature range: -40°C to +120°C                          • Temperature range: -50°C to +450°C                           • Temperature range: -50°C to +450°C
  Stock No                   Size                  Price        Stock No                   Size                   Price        Stock No                  Size                  Price
  268613               400 g Cartridge              7.82        268619                400 ml Aerosol              27.77        268621                    100 g                  26.31
  268614                     5 kg                  84.97                                                                       268622                    750 g                  80.22
  268615                    18 kg                 341.89




                                                                                 Dry Moly Fluid
                                                                                                                                               Oxylube Spray
Tuflube Allweather Open Gear Lubricant                        Rocol Dry Moly Fluid is a brush/dip/spray applied dry film
                                                              lubricant of resin bonded moly. Features include               Rocol Oxylube Spray is an aerosol applied thin lubricating
Rocol Tuflube Allweather has been developed to provide        • For use where conventional lubricants fail or cause          film of molybdenum disulphide bonded with an inorganic
long term lubrication in wet and humid conditions.              unacceptable contamination                                   agent. Features include
Features include                                              • Exceptionally high load carrying strength                    • Use particularly in oxygen rich or vacuum
• Extremely adhesive, water resistant lubricant               • Withstands high temperatures                                    environments, or where components may be affected
• Displaces water; can be applied to wet surfaces             • Widely used for the lifetime lubrication of lightly loaded      by chemicals, solvents or petroleum based products
• Excellent corrosion protection                                or slow moving parts                                         • Good load carrying strength
• Use on sliding surfaces, gears, slow speed bearings         • Use as a dry film lubricant on bearings and chains           • Withstands high temperatures
  and outdoor equipment or wherever a heavy duty              • Temperature range: -50°C to +450°C                           • Resists pick-up of dirt and dust
  lubricant is required                                                                                                      • Use as an anti-seize on precision threaded components
                                                                Stock No                   Size                   Price      • Temperature range: -200°C to +450°C
• Bitumen Free
• Temperature range: -30°C to +70°C                             268620                    5 litres               268.43        Stock No                  Size                  Price
  Stock No                   Size                  Price
                                                                                                                               268623               400 ml Aerosol              30.69
  268616               400 g Cartridge             13.53
  268617                     5 kg                 128.30
  268618                    18 kg                 429.34
                                                                                                          ROCOL LUBRICANTS                                                151




   MT-LM Assembly and Run-in Paste                                              Dry PTFE Spray                                 Sapphire Precision Lube Spray
Rocol Assembly and Running-In Lubricant is a soft greasy      Rocol Dry PTFE Spray is an aerosol applied, non-toxic,     Rocol Sapphire Lube Spray is an aerosol applied, ultra
paste with high moly content. Features include                non-staining, PTFE lubricant. Features include             high performance lubricant. Features include
• Provides a thin lubricating film that resists high loads    • Provides a dry, low friction, non-stick surface          • Made from synthetic oils with PTFE
• Use as a lubricant to facilitate assembly of close          • Reduces static                                           • Provides excellent lubrication and penetration in a
  tolerance components and interference fits                  • Use on cams, slides, chutes, open bearings and shears      wide range of industrial applications
• Prevents pick-up and galling                                  on food packaging or printing machinery                  • Formulated for medium/high load applications
• Protects components during the critical start-up and        • Temperature range: -200°C to +270°C                      • Excellent corrosion protection
  running-in period                                           • NSF registered                                           • Use on links, pins, pivots, bearings and chains
• Prevents wear and fretting corrosion                                                                                   • Fitted with 360° spray system for all angle use
                                                                Stock No                   Size                  Price
• Use for the lubrication of valves and slow moving                                                                      • Temperature range: -55°C to +250°C
  surfaces under high loads                                     268627               400 ml Aerosol              13.18
                                                                                                                           Stock No                  Size                 Price
• Acts as an anti-seize to facilitate dismantling and
  adjustment                                                                                                               268630              400 ml Aerosol              11.76
• Temperature range: -50°C to +450°C
  Stock No                  Size                   Price
  268624                    100 g                  23.74
  268625                    750 g                  80.70




                                                                                 Vac Pump Oil
                                                              Rocol Vac Pump Oil is a high performance vacuum oil                     Sapphire Spray Grease
                                                              formulated to extend lubricant lifetime in high load and
                                                              elevated pressure conditions. Features include             Rocol Sapphire Spray Grease is an aerosol applied, high
                                                              • Clean low odour product that minimises deposits in       quality grease. Features include
                                                                vacuum pump systems                                      • Multi-purpose grease for maximum convenience and
           Precision Silicone Spray                           • Increases pump reliability and extends lubrication         ease of application
                                                                intervals                                                • Provides excellent lubrication over a wide temperature
Rocol Precision Silicone Spray is an aerosol applied,         • Prevents corrosion from moisture ingress                   range
non-toxic, colourless, silicone lubricant. Features include   • Ideal for use as a gearbox flushing oil                  • Formulated for medium/high load applications
• Provides a light lubricating film with wide temperature     • Temperature range: -5°C to +130°C                        • Good corrosion protection
  stability                                                   • NSF registered                                           • Use on bearings, links, pins and slides
• Effective lubricant where cleanliness is essential                                                                     • Temperature range: -50°C to +200°C
• Excellent anti-stick and slip properties                      Stock No                   Size                  Price
                                                                                                                           Stock No                  Size                 Price
• Use on slides, bearings, conveyors, cutting tables,           268628                   5 litres                67.22
  cutting knives and sealing jaws                               268629                   20 litres              175.30     268631              400 ml Aerosol               9.83
• Can be used as a mould release agent for plastics and
  rubbers
• Temperature range: -50°C to +200°C
• NSF registered
  Stock No                  Size                   Price
  268626               400 ml Aerosol              10.23
152                             ROCOL BEARING GREASE




           Sapphire Bearing Grease                            Sapphire Premier Bearing Grease                              Sapphire Aqua 2 Bearing Grease
Rocol Sapphire Bearing Grease is a revolutionary, high    Rocol Sapphire Premier is a premium performance, multi-     Rocol Sapphire Aqua 2 is a water resistant grease for all
performance grease that provides effective long term      purpose grease for use in arduous conditions.               applications. Features include
lubrication and meets the ever increasing demands of      Features include                                            • Soap thickened bearing grease
today's production environment. Features include          • Provides excellent lubrication at higher speeds and       • Exceptional resistance to water washout
• Multi-purpose, multi-complex, soap grease                 higher temperatures                                       • Provides long term lubrication of bearings that are
• Excellent load carrying capability                      • Good load carrying capability                               operating in water or are subjected to continual
• Significantly extends relubrication intervals           • Fortified with PTFE                                         washing by water
• Superior corrosion protection                           • Superior corrosion protection                             • Exceptional corrosion protection
• Blue colour enables easy identification in use          • Compatible with most plastics and rubbers                 • NGLI No. 2
• Temperature range: -30°C to +150°C                      • Use on electric motor and fan bearings                    • Temperature range: -20°C to +150°C
                                                          • NGLI No. 2
                                                                                                                        Stock No                  Size                  Price
Sapphire 2 Bearing Grease                                 • Temperature range: -50°C to +200°C
• Triple life bearing grease                                                                                            268651               380 g Cartridge            10.40
                                                           Stock No                  Size                  Price
• NGLI No 2                                                                                                             268652                     4 kg                 76.49
                                                           268644               380 g Cartridge            20.18        268653                    18 kg                321.84
  Stock No                     Size              Price
                                                           268645                     4 kg                147.09        268654                    50 kg                814.36
  268632               400 g Cartridge             5.30    268646                    18 kg                610.96
  268633                     5 kg                 58.46    268647                   170 kg               1824.89
  268634                    18 kg                182.25
  268635                    50 kg                464.77
  268636                   185 kg               1090.49

Sapphire 1 Bearing Grease
• Pumpable triple life bearing grease
• NGLI No. 1
  Stock No                     Size              Price
  268637               400 g Cartridge             5.30
  268638                     5 kg                 58.46
  268639                    18 kg                182.25
  268640                    50 kg                472.26
  268641                   185 kg               1021.91

Sapphire 000 Bearing Grease
• Recommended and approved for use in centralised
  lubricating systems and for grease filled gearboxes
• Semi-fluid bearing grease NGLI No. 000                                                                                 Sapphire Hi-Load 2 Bearing Grease
  Stock No                     Size              Price
                                                            Sapphire Lo-Temp 2 Bearing Grease                         Rocol Sapphire Hi-Load 2 has been formulated to provide
  268642                       5 kg               58.46                                                               protection against heavy loads in all bearing types.
  268643                       18 kg             182.25   Rocol Sapphire Lo-Temp 2 has been developed to provide      Features include
                                                          low start-up and running torques at lower temperatures.     • Multi-complex soap thickened grease containing
                                                          Features include                                              molybdenum disulphate
                                                          • Semi-synthetic, multi-complex, soap grease                • Provides protection against heavy loads and vibration
                                                          • High resistance to load and wear                          • Extends relubrication intervals
                                                          • Superior corrosion protection                             • Exceptional corrosion protection
                                                          • Recommended for use on plain and anti-friction bearings   • NGLI No. 2
                                                          • NGLI No. 2                                                • Temperature range: -30°C to +150°C
                                                          • Temperature range: -50°C to +120°C                          Stock No                  Size                  Price
                                                           Stock No                  Size                  Price        268655               400 g Cartridge            11.51
                                                           268648               400 g Cartridge            10.48        268656                     5 kg                101.94
                                                           268649                    4.5 kg                92.93        268657                    18 kg                338.63
                                                           268650                    18 kg                306.59
                                                                                          ROCOL BEARING GREASE                                                              153




 Sapphire Hi-Pressure Bearing Grease                            Sapphire Extreme Bearing Grease                             Sapphire Aqua-Sil Bearing Grease
Rocol Sapphire Hi-Pressure has been formulated to           Rocol Extreme has been formulated to provide effective      Rocol Sapphire Aqua-Sil is a longlife silicone grease.
provide protection against heavy loads in plain bearings.   lubrication in the most arduous working conditions.         Features include
Features include                                            Features include                                            • Good resistance to chemicals, oils, water and gases
• Clay thickened grease containing a high level of          • Semi-synthetic grease containing molybdenum               • Compatible with most plastics and rubbers
  molybdenum disulphide                                       disulphide                                                • Excellent high temperature stability
• Provides protection against heavy loads                   • Excellent resistance to high temperature, heavy loading   • Recommended for long term lubrication of bearings,
• Reduces wear                                                and vibration                                               slides and valves operating at high temperatures in
• Extends relubrication intervals                           • Exceptional corrosion protection                            aggressive environments
• Exceptional corrosion protection                          • Suitable for plain and anti-friction bearings             • Suitable for use as an electrical insulating and filling
• NGLI No. 2                                                • Use on crushers, excavators and other heavy duty            compound
• Temperature range: -20°C to +150°C                          equipment                                                 • WRC approved for hot and cold potable water
                                                            • NGLI No. 2                                                • NGLI No. 3/4
  Stock No                  Size                  Price
                                                            • Temperature range: -10°C to +250°C                        • Temperature range: -40°C to +200°C (Short periods
  268658               400 g Cartridge            12.97                                                                   +220°C)
                                                             Stock No                  Size                  Price
  268659                  500 g Tin               16.16
                                                                                                                          Stock No                    Size                   Price
  268660                     5 kg                115.40      268665               400 g Cartridge            20.94
  268661                    18 kg                383.36      268666                     5 kg                188.69        268673                      85 g                   11.09
  268662                    50 kg               1006.31      268667                    18 kg                619.49        268674                     500 g                   50.90
                                                             268668                    50 kg               1405.88        268675                      5 kg                  356.27




  Sapphire Hi-Speed 2 Bearing Grease
                                                                 Sapphire Endure Bearing Grease                          Sapphire Aqua-Sil Hi-Load Bearing Grease
Rocol Hi-Speed 2 is a premium performance grease that
extends the boundaries of high speed greases.               Rocol Sapphire Endure is an extremely long life grease      Rocol Sapphire Aqua-Sil is a high load silicone grease
Features include                                            for use at temperatures up to 280°C. Features include       which contains molybdenum disulphide.
• Unique synthetic based soap grease                        • Perfluorinated polyester grease fortified with PTFE       Features include
• Lubricates effectively at the highest speeds              • Highly stable at elevated temperatures                    • Good resistance to chemicals, oils, water and gases
• Excellent load carrying capacity                          • Extreme chemical and solvent resistance                   • Compatible with most plastics and rubbers
• Exceptional corrosion protection                          • Exceptional corrosion protection                          • Excellent high temperature stability
• Use on machine tool spindles, textile spinning            • Greatly extends relubrication intervals                   • Excellent load carrying capacity
  machines, aerospace and other high speed bearing          • NGLI No. 2                                                • Recommended for long term lubrication of bearings
  applications                                              • Temperature range: -25°C to +280°C                          slides and valves operating under heavy loads in
• NGLI No. 2                                                                                                              aggressive environments
                                                             Stock No                  Size                  Price
• Maximum speed: 1.25 x 106 DmN                                                                                         • NGLI No. 3/4
• Temperature range: -40°C to +120°C                         268669                 100 g Tube               69.52      • Temperature range: -40°C to +200°C (Short periods
                                                             268670               700 g Cartridge           486.90        +220°C)
  Stock No                  Size                  Price
                                                             268671                     1 kg                677.54
  268663               380 g Cartridge            43.14      268672                     5 kg               3060.40        Stock No                    Size                   Price
  268664                    4.5 kg               302.91                                                                   268676                     500 g                  158.92
                                                                                                                          268677                      5 kg                 1135.06




                       All prices and descriptions correct at time of publication and are subject to change without notice
154                          ROCOL BEARING GREASE

                                                                                                                        Sapphire Hi-Torque Gear Oil CONTINUED >


                                                                                                                         Sapphire Hi-Torque 320
                                                                                                                         • ISO VG 320
                                                                                                                           Stock No                   Size                Price
                                                                                                                           268688                    5 litres             98.24
                                                                                                                           268689                   20 litres            317.84
                                                                                                                           268690                   200 litres          1308.43

                                                                                                                         Sapphire Hi-Torque 460
                                                                                                                         • ISO VG 460
                                                                                                                           Stock No                   Size                Price
                                                                                                                           268691                    5 litres             98.24
                                                                                                                           268692                   20 litres            317.84
                                                                                                                           268693                   200 litres          1308.43

               Sapphire 1 Unilube                                          Sapphire Autolube                             Sapphire Hi-Torque 680
                                                                                                                         • ISO VG 680
Rocol Sapphire 1 Unilube is a self-contained automatic      Rocol Sapphire Autolube is a self-contained automatic
lubricator. Features include                                lubricator. Features include                                   Stock No                   Size                Price
• Gas activated, fully automatic lubrication system         • Electromechanical, fully automatic lubrication system        268694                    5 litres             98.24
• Contains Sapphire 1 'triple life' bearing grease          • Contains Sapphire 1 'triple life' bearing grease             268695                   20 litres            317.84
• Ensures consistent, constant lubrication over extended    • Ensures consistent, constant lubrication over extended       268696                   200 litres          1308.40
  periods for essential equipment                             periods for essential equipment
• Variable dispensing rates allow a lubrication period of   • Delivers absolutely accurate quantities of Sapphire 1,
  between 3 and 12 months                                     irrespective of the surrounding temperatures
                                                            • Variable dispensing rates allow a lubrication period of
  Stock No                  Size                  Price
                                                              up to 36 months
  268678                   100 ml                 27.80
                                                            Sapphire Autolube Complete
                                                              Stock No                  Size                  Price
                                                              268680                   120 ml                 86.92

                                                            Sapphire Autolube Refill
                                                              Stock No                  Size                  Price
                                                              268681                   120 ml                 45.99




                                                                                                                          Sapphire Hi-Power Compressor and Hydraulic Oils
                                                                                                                         Rocol Sapphire Hi-Power is a range of high performance
                                                                                                                         lubricants which are designed to provide extended
                                                                                                                         service life, thereby reducing service time and costs.
                                                                                                                         Features include
           Sapphire Premier Unilube                                                                                      • Uniquely suitable for use in compressor, hydraulic and
                                                                                                                           airline systems
Rocol Sapphire Premier Unilube is a self-contained                                                                       • In compressors, the L-CO system provides low carry
automatic lubricator. Features include                                                                                     over and enhanced oxidation stability
• Gas activated, fully automatic lubrication system                                                                      • In hydraulic systems, the premium quality ensures the
• Contains Sapphire Premier super performance bearing                                                                      fluid does not generate deposits, sludge and varnish
  grease                                                                                                                   which results from fluid breakdown at high temperatures
• Ensures consistent, constant lubrication over extended                                                                 • Available in five viscosity grades
  periods for essential equipment                                                                                        • Temperature range: -20°C to +120°C
• Variable dispensing rates allow a lubrication period of                                                                • Specifications/Approvals: Compressors
  between 3 and 12 months                                           Sapphire Hi-Torque Gear Oil
                                                                                                                           DIN 51506 (VBL, VCL, VDL)
  Stock No                  Size                  Price     Rocol Sapphire Hi-Torque is a range of high performance        ISO/DP 6521 (DAA, DAB, DAH, DAG)
                                                            gear oils which are designed to provide extended service     • Specifications/Approvals: Hydraulics
  268679                   100 ml                 33.21                                                                    Vickers 1-2863, M-2950-S
                                                            life, thereby reducing service time and costs.
                                                            Features include                                               Cincinnati Milacron P68, P69, P70
                                                            • Unique Start Up Protection System (SUPS) provides            US Steel 127, 136
                                                               superior load carrying capabilities, reduces wear and       General Motors LH-04-1, LH-06-1, LH-15-1,
                                                               improves stability at high temperatures                     Ford M-6C32
                                                            • Available in five viscosity grades
                                                            • Approved by David Brown gearboxes                          Sapphire Hi-Power 22
                                                            • Temperature range: -20°C to +120°C                         • ISO VG 22
                                                            • ISO VG 100                                                   Stock No                   Size                Price
                                                            Sapphire Hi-Torque 100                                         268697                    20 litres           100.14
                                                            • ISO VG 100                                                   268698                   200 litres           612.53
                                                              Stock No                  Size                  Price
                                                                                                                         Sapphire Hi-Power 32
                                                              268682                  5 litres                98.24      • ISO VG 32
                                                              268683                 20 litres               317.84
                                                              268684                 200 litres             1308.43        Stock No                   Size                Price
                                                                                                                           268699                    20 litres            78.93
                                                            Sapphire Hi-Torque 220                                         268700                   200 litres           414.00
                                                            • ISO VG 220
                                                              Stock No                  Size                  Price      Sapphire Hi-Power 46
                                                                                                                         • ISO VG 46
                                                              268685                  5 litres                98.24
                                                              268686                 20 litres               317.84        Stock No                   Size                Price
                                                              268687                 200 litres             1308.43        268701                    20 litres            78.93
                                                                                                                           268702                   200 litres           517.50
                                                                               ROCOL CORROSION INHIBITORS                                                                        155

Sapphire Hi-Power Compressor and Hydraulic Oils CONTINUED >


 Sapphire Hi-Power 68
 • ISO VG 68
   Stock No                    Size                    Price
   268703                    20 litres                 78.93
   268704                    200 litres               414.00

 Sapphire Hi-Power 100
 • ISO VG 100
   Stock No                    Size                    Price
   268705                    20 litres                 78.93
   268706                    200 litres               414.00



                                                                       Z30 Corrosion Protection Fluid                                Z5 Corrosion Protection Fluid
                                                                Rocol Z30 is a long term, heavy duty, corrosion inhibitor.   Rocol Z5 is a highly versatile lubricant, corrosion inhibitor
                                                                Features include                                             and water repellent. Features include
                                                                • Dries to form a soft, flexible, wax-like film              • Light lubricant; use for day-to-day maintenance
                                                                • Film will not harden or crack; total protection assured      lubrication
                                                                • Protects for up to two years                               • Penetrates corrosion to free seized parts
                                                                • Use on equipment where long term corrosion                 • Displaces water and protects against corrosion
                                                                  prevention and lubrication are required                    • Use to dry out electronic equipment
                                                                • Temperature range: -20°C to +110°C                         • Does not attract dirt or dust
                                                                                                                             • Temperature range: -20°C to +110°C
                                                                  Stock No                   Size                   Price
                                                                                                                               Stock No                    Size                   Price
                                                                  268709                300 ml Aerosol              12.40
                                                                  268710                    5 litres                80.87      268714                    20 litres               225.38
                                                                  268711                   20 litres               239.15      268715                   200 litres              1448.76



               Cold Galvanising Spray
 Rocol Cold Galvanising is a high performance anti-
 corrosion treatment for all ferrous metals.
 Features include
 • Thin zinc-rich film provides long term corrosion
   protection
 • Actively fights corrosion by its galvanic properties
 • Can be used effectively in severe conditions
 • Ideal touch-up for damaged galvanised surfaces
   Stock No                    Size                    Price
   268707                 400 ml Aerosol                16.40




                                                                       Z25 Corrosion Protection Fluid                         Tufshield Corrosion Protection Grease
                                                                Rocol Z25 is a long lasting lubricant and corrosion          Rocol Tufshield is a long term, heavy duty, corrosion
                                                                inhibitor. Features include                                  inhibitor. Features include
                                                                • Non-drying lubricant                                       • High cling grease designed to protect all metals under
                                                                • Use to free seized metal parts                               the severest conditions of erosion and corrosion
                                                                • Provides corrosion protection for up to one year           • Particularly effective in areas subject to flooding,
                                                                • Temperature range: -20°C to +110°C                           repeated forceful washdowns and marine
                                                                                                                               environments
                                                                  Stock No                   Size                   Price
                                                                                                                             • Temperature range: -10°C to +120°C
                                                                  268712                   20 litres               235.43
                                                                                                                               Stock No                    Size                   Price
                                                                  268713                   200 litres             1354.06
                                                                                                                               268716                     450 g                   20.25
                                                                                                                               268717                     18 kg                  307.36


         Heavy Duty Rustshield Spray
 Rocol Heavy Duty Rustshield provides effective long term
 corrosion protection, even in the most severe conditions.
 Features include
 • Thin waxy film gives extended corrosion protection,
   indoors and outdoors
 • Effective in severely corrosive conditions
 • Ideal for protection of parts and equipment being
   shipped overseas
 • Also provides residual lubrication for assembly etc
 • Temperature range: -20°C to +110°C
   Stock No                    Size                    Price
   268708                 300 ml Aerosol                19.18
156                           ROCOL METALWORKING LUBRICANTS




                  Moisture Guard                                RTD Liquid Hand Applied Cutting Lubricant                    RTD Compound Hand Applied Cutting Lubricant
Rocol Moisture Guard provides effective indoor corrosion       Rocol RTD Liquid is a medium viscosity fluid containing      Rocol RTD Compound is a soft, low melting point paste,
protection for bare metal components, machined parts           extreme pressure additives. This product gives a superb      containing extreme pressure additives. Formulated to
and mould tools, whether in storage, transit or between        cutting performance across a wide range of metals.           cling to the tool, it provides a superb cutting
operations. Features include                                   Features include                                             performance. Features include
• Tenacious soft film; easily handled                          • Use on a wide range of ferrous and non-ferrous metals,     • Use on a wide range of ferrous and non-ferrous metals,
• Water repellent film; provides up to five years indoor         including hardened steels, titanium and nimonics             including hardened steels, titanium and nimonics
  protection against corrosion                                 • Significantly reduces friction and doubles tool life       • Suitable for severe cutting operations
• Particularly effective in damp or humid environments         • Improves surface finish                                    • Significantly reduces friction and doubles tool life
• Penetrates to inaccessible parts                             • Flows to the cutting edge                                  • Improves surface finish
• Almost dry film; does not attract dirt or dust               • Oil and solvent free                                       • Allows increased removal rates
• Thin even film; does not normally require removal            • Contains no silicones                                      • Apply directly to the tool or workpiece
• Available in clear and green formulations                    • Hand applied directly to the cutting operation or via      • Rolls Royce approved; Spec CSS 137
                                                                 automatic applicator on CNC machines
                                                                                                                              Stock No                  Size                   Price
Clear Moisture Guard                                           • Can be added to ordinary mineral cutting oil for the
                                                                 most severe cutting operations, such as broaching and        268729                     50 g                   3.56
  Stock No                   Size                   Price
                                                                 gear cutting on the toughest metals                          268730                    500 g                   9.72
  268718                400 ml Aerosol              14.77                                                                     268731                     5 kg                  90.94
                                                                 Stock No                  Size                  Price
                                                                                                                              268732                    18 kg                 313.38
                                                                 268724            400 g Squeeze Bottle          14.55
Green Moisture Guard                                             268725                    5 litre              126.87
  Stock No                   Size                   Price        268726                   20 litres             435.85
  268719                400 ml Aerosol              14.77
  268720                    5 litres                96.40




                                                                                                                                                 RTD Spray
                                                                                                                            Rocol RTD Spray is an aerosol applied metal cutting
                                                                RTD Cleancut Hand Applied Cutting Lubricant                 lubricant consisting of a concentrate of extreme pressure
                                                                                                                            additives. Ideal for reaming, tapping, drilling and general
 TRI-Logic RTD Hand Applied Cutting Lubricant                  Rocol RTD Cleancut is a specially formulated, hand           workshop operations. Features include
                                                               applied, cutting lubricant designed to improve all day-to-   • Use on all ferrous metals
Rocol TRI-Logic RTD is a hand applied tapping fluid that       day machining operations, whatever the metal being           • Suitable for severe cutting operations
fortifies cutting fluids. Designed for selective application   worked. Features include                                     • Superb cutting performance
on arduous operations, its blend of lubricity and extreme      • Use on a wide range of ferrous and non-ferrous metals,     • Doubles tool life
pressure additives significantly improve cutting                 including copper, brass and aluminium                      • Fast and convenient application, especially where
performance. Features include                                  • Non-staining on yellow metals and aluminium                  accessibility is a problem
• Use on a wide range of ferrous and non-ferrous metals,       • Suitable for aerospace and nuclear applications            • Can be applied directly to moving tools
  including stainless steel, titanium and nimonics             • Reduces friction and extends tool life
                                                                                                                              Stock No                  Size                   Price
• Reduces friction and extends tool life                       • Improves surface finish
• Improves surface finish                                      • Low viscosity, quick penetrating fluid, ensuring             268733               400 ml Aerosol              14.68
• Fully emulsifies with water mix cutting fluids to              lubrication at the cutting edge
  enhance their overall cutting performance                    • Can be diluted up to 1:1 with water for less arduous
• Water washable                                                 operations
• Resists degradation                                          • Dissolves into other water mix cutting fluids to enhance
• Low odour and light colour; pleasant to use                    their overall cutting performance
• Contains no silicones                                        • Water soluble, so cleaning is simple safe and
• Hand applied directly to the tap or via automatic              economical
  applicator on CNC machines                                   • Sulphur and chlorine free
• Optimised for use in the Rocol TRI-Logic systems             • Non-fuming and low odour
                                                               • Hand applied directly to the cutting operation or via
  Stock No                   Size                   Price
                                                                 automatic applicator on CNC machines
  268721            350 ml Squeeze Bottle           14.55
                                                                 Stock No                  Size                  Price
  268722                    5 litres               126.87
  268723                   20 litres               435.85        268727           350 ml Squeeze Bottle          14.89
                                                                 268728                   5 litres              129.39
                                           ROCOL METALWORKING LUBRICANTS & FLUIDS                                                                                          157




                   RTD Foamcut                                         RTD Chlorine-Free Spray                                 V-Cut MT Metalworking Fluid
Rocol RTD Foamcut is a metal cutting lubricant specially    Rocol RTD Chlorine-Free Spray is an aerosol applied         Rocol V-cut MT is part of the V-cut range of 'Value
formulated to provide extreme pressure cutting              metal cutting lubricant consisting of a concentrate of      Engineered' water mix metal working concentrates.
performance in an economical-to-use foaming aerosol.        extreme pressure additives. Ideal for reaming, tapping,     Features include
Features include                                            drilling and general workshop operations.                   • Rocol's performance and quality at a competitive price
• Use on a wide range of ferrous and non-ferrous metals,    Features include                                            • Forms a stable, low foaming, milky white emulsion
  including copper, brass and aluminium                     • Specifically developed to satisfy today's ever            • Use for all general cutting operations
• Non-staining on yellow metals and aluminium                 increasing environmental standards and health and         • Excellent residual corrosion protection on machine
• Suitable for severe cutting operations                      safety needs                                                surfaces and workpieces
• Reduces friction and extends tool life                    • Use on all ferrous metals                                 • Contains no nitrites and no formaldehyde releasing
• Improves surface finish                                   • Reduces friction and extends tool life                      biocides
• Allows increased removal rates                            • Improves surface finish                                   • Low odour; pleasant to use
• Foaming action reduces run-off from tool and              • Allows increased removal rates                            • Mixes at 15:1 to 20:1 in water
  workpiece                                                 • Fast and convenient application, especially where
                                                                                                                          Stock No                   Size                  Price
• Clean, low odour, white foam                                accessibility is a problem
• Fast and convenient application, especially where         • Particularly suitable for use during machining              268738                    5 litres                29.14
  accessibility is a problem                                  operations                                                  268739                   20 litres                76.72
• Can be applied directly to moving tools                                                                                 268740                   60 litres               227.78
                                                              Stock No                  Size                 Price
 Stock No                  Size                  Price
                                                              268736              400 ml Aerosol              16.84
 268734               300 ml Aerosol             17.48




                                                                                                                                V-Cut SS Metalworking Fluid
                                                                   RTD Chlorine-Free Compound                           Rocol V-cut SS is part of the V-cut range of 'Value
          RTD Chlorine-Free Liquid                                                                                      Engineered' water mix metal working concentrates.
                                                            Rocol RTD Chlorine-Free Compound is a soft paste            Features include
Rocol RTD Chlorine-Free Liquid is a viscous fluid for use   containing extreme pressure additives. Ideal for reaming,   • Rocol's performance and quality at a competitive price
in reaming, tapping, drilling and other metal cutting       tapping, drilling and general workshop operations.          • Forms a translucent green emulsion which allows a
operations. Features include                                Features include                                              clear view of the cutting zone
• Specifically developed to satisfy today's every           • Specifically developed to satisfy today's ever            • Semi-synthetic fluid designed for all general cutting
  increasing environmental standards and health and           increasing environmental standards and health and           and grinding operations
  safety needs                                                safety needs                                              • Unique corrosion protection package extends the
• Use on a wide range of ferrous and non-ferrous metals,    • Use on a wide range of ferrous and non-ferrous metals,      working dilution range
  including hardened steels, titanium and nimonics            including hardened steels, titanium and nimonics          • Contains no nitrites and no formaldehyde releasing
• Reduces friction and extends tool life                    • Reduces friction and extends tool life                      biocides
• Improves surface finish                                   • Improves surface finish                                   • Low odour; pleasant to use
• Allows increased removal rates                            • Allows increased removal rates                            • Mixes 35:1 to 45:1 in water for cutting, 45:1 to 55:1 for
• Hand applied directly to the cutting operation            • Clings to the cutting tool                                  grinding
• Can be added to ordinary mineral cutting oil to enhance   • Apply directly to the tool or workpiece
                                                                                                                          Stock No                   Size                  Price
  cutting performance
                                                              Stock No                  Size                 Price
                                                                                                                          268741                    5 litres                38.29
 Stock No                  Size                  Price
                                                              268737                   450 g                  13.34       268742                   20 litres               103.34
 268735            350 ml Squeeze Bottle         18.54                                                                    268743                   60 litres               292.84




                                  Trade Counter open 8.15 am - 5.30 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
158                           ROCOL METALWORKING FLUIDS

                                                                                                                            Ultracut 260 Cutting Fluid CONTINUED >

                                                                                                                            Ultracut 260 Cutting Fluid
                                                                                                                               Stock No                     Size             Price
                                                                                                                               268754                     20 litres          292.01
                                                                                                                               268755                     60 litres          661.62




        V-Cut EP Metalworking Fluid                                      Ultracut 255 Cutting Fluid
Rocol V-cut EP is part of the V-cut range of 'Value           Rocol Ultracut 255 is a high quality, extreme pressure,
Engineered' water mix metal working concentrates.             water mix; cutting fluid. Features include
Features include                                              • Designed for medium/severe cutting operations
• Rocol's performance and quality at a competitive price      • Forms a stable, low foaming, milky white emulsion
• Forms a stable, low foaming, milky white emulsion           • Suitable for most ferrous and non-ferrous metals
• High performance, extreme pressure fluid designed for       • Extends tool life
  heavy duty cutting operations on hardened steels and        • Improves surface finish
  other difficult to machine alloys                           • Allows increased production rates                                       Ultracut 280A Cutting Fluid
• The blend of lubricity and EP additives extend tool life,   • High refined mineral oil content ensures good lubricity
  improve surface finish and allow increased machining          during machining                                            Rocol Ultracut 280A is a high performance, water mix,
  rates                                                       • Excellent residual corrosion protection                     aluminium cutting fluid. Features include
• Long sump life                                              • Inherently resistant to degradation                         • Designed for medium/severe cutting operations on
• Contains no nitrites and no formaldehyde releasing          • Long and predictable sump life                                aluminium and its alloys
  biocides                                                    • Rejects tramp oil                                           • Forms a stable, low foaming, milky white emulsion
• Low odour; pleasant to use                                  • Pleasant and safe to use                                    • Suitable for aluminium and its alloys, copper and its
• Mixes 20:1 to 40:1 in water                                 • Ideal for individual and central cutting fluid systems        alloys, other non-ferrous metals and all but the most
                                                              • Special formulation available for hard water conditions       difficult to machine ferrous metals
  Stock No                   Size                  Price                                                                    • Non-staining with most aerospace and industrial alloys
  268744                   5 litres                 43.64     Ultra 255 Cutting Fluid                                       • Prevents built-up edge
  268745                   20 litres               113.22     • Recommended dilution between 20:1 and 40:1 in water         • Extends tool life
  268746                   60 litres               317.53                                                                   • Promotes excellent surface finish
                                                                Stock No                   Size                   Price     • Excellent residual corrosion protection
                                                                268751                   5 litres                 70.25     • Inherently resistant to degradation
                                                                268752                   20 litres               240.55     • Long and predictable sump life
                                                                                                                            • Rejects tramp oil
                                                                                                                            • Pleasant and safe to use
                                                              Ultra 255 HW Cutting Fluid                                    • Ideal for individual and central cutting fluid systems
                                                              • Stable in hard water conditions. For mixing in water        • Special formulation available for hard water conditions
                                                                with hardness greater than 250 ppm                          • Recommended dilution between 15:1 and 25:1 in water
                                                              • Recommended dilution between 15:1 and 35:1 in water
                                                                Stock No                   Size                   Price     Ultra 280A Plus Cutting Fluid
                                                                268753                   20 litres               240.55        Stock No                     Size             Price
                                                                                                                               268756                     20 litres          167.23
                                                                                                                               268757                     60 litres          349.93

                                                                                                                            Ultra 280A HW Cutting Fluid
                                                                                                                            • Stable in hard water conditions. For mixing in water
                                                                                                                              with hardness greater than 250 ppm
                                                                                                                               Stock No                     Size             Price
                                                                                                                               268758                     20 litres          167.23
           Ultracut 250 Cutting Fluid
Rocol Ultracut 250 is a high quality, general purpose,
water mix, cutting fluid. Features include
• Designed for light/medium cutting operations
• Forms a stable, low foaming, milky white emulsion
• Good cutting performance across a wide range of
  ferrous and non-ferrous metals
• High refined mineral oil content ensures good lubricity
  during machining
• Excellent residual corrosion protection
• Inherently resistant to degradation
• Long and predictable sump life                                         Ultracut 260 Cutting Fluid
• Rejects tramp oil
                                                              Rocol Ultracut 260 is a high performance, extreme
• Pleasant and safe to use
                                                              pressure, water mix, cutting fluid. Features include
• Ideal for individual and central cutting fluid systems
                                                              • Designed to provide superior performance in severe
• Special formulation available for hard water conditions
                                                                cutting operations
                                                              • Forms a stable, low foaming, milky white emulsion
Ultracut 250 Plus Cutting Fluid                               • Suitable for a wide range of ferrous and non-ferrous
• Recommended dilution between 20:1 and 40:1 in water
                                                                metals including stainless steel, titanium, nickel alloys
  Stock No                   Size                  Price        and other difficult to machine alloys
                                                              • Optimum tool life
  268747                   5 litres                 50.98
                                                              • Improves surface finish
  268748                   20 litres               167.23
                                                              • Allows increased production rates
  268749                   60 litres               419.70
                                                              • High refined mineral oil content ensures good lubricity
                                                                during machining
Ultracut 250 HW Cutting Fluid                                 • Excellent residual corrosion protection
• Stable in hard water conditions. For mixing in water        • Inherently resistant to degradation
  with hardness greater than 250 ppm                          • Long and predictable sump life
• Recommended dilution between 15:1 and 35:1 in water         • Rejects tramp oil
                                                              • Pleasant and safe to use
  Stock No                   Size                  Price
                                                              • Ideal for individual and central cutting fluid systems
  268750                   20 litres               167.23     • Recommended dilution between 20:1 and 40:1 in water
                                                                             ROCOL METALWORKING FLUIDS                                                                      159




Ultracut 370 Cutting and Grinding Fluid                       Ultracut 320 Cutting and Grinding Fluid                             Ultragrind 430 Grinding Fluid
Rocol Ultracut 370 is a semi-synthetic, general purpose,      Rocol Ultracut 320 is a high performance, semi-synthetic,   Rocol Ultragrind 430 is a high quality, synthetic, general
water mix, cutting and grinding fluid. Features include       extreme pressure, water mix, cutting and grinding fluid.    purpose, water mix, grinding fluid. Features include
• Designed for light/medium cutting and grinding              Features include                                            • Designed for light/medium grinding operations
  operations                                                  • Designed to provide superior performance in               • Forms a translucent green emulsion which provides a
• Forms a translucent green micro-emulsion which                medium/severe cutting and grinding operations               clear view of the workpiece
  provides a clear view of the workpiece                      • Forms a translucent blue micro-emulsion which             • Very low foaming
• Low foaming                                                   provides a clear view of the workpiece                    • Suitable for surface, centreless and cylindrical grinding
• Good performance at high dilutions, across a wide           • Low foaming                                                 operations with all types of grinding wheel
  range of ferrous and non-ferrous metals                     • Suitable for a wide range of ferrous and non-ferrous      • Formulated to ensure rapid settlement of grinding fines,
• Excellent residual corrosion protection                       metals                                                      giving a clean flow of fluid to the workpiece
• Inherently resistant to degradation                         • Extends tool life                                         • Promotes excellent surface finish
• Long and predictable sump life                              • Promotes excellent surface finish                         • Oil free; keeps wheels clean and open
• Tolerant to tramp oil                                       • Allows increased machining rates                          • Excellent residual corrosion protection
• Pleasant and safe to use                                    • Excellent residual corrosion protection                   • Inhibits staining
• Compatible with hard and soft water                         • Inhibits staining                                         • Long and predictable sump life
• Economical to use; operates efficiently at high dilutions   • Inherently resistant to degradation                       • Nitrite free
• Recommended dilutions between 40:1 and 60:1 for             • Long and predictable sump life                            • Low odour
  cutting and between 50:1 and 70:1 for grinding              • Emulsifies tramp oil                                      • Recommended dilution between 30:1 and 60:1 in water
                                                              • Pleasant and safe to use
Ultracut 370 Plus Cutting and Grinding Fluid                  • Recommended dilutions between 20:1 and 40:1 for           Ultragrind 430 Metal Grinding Fluid
                                                                cutting and 40: and 60:1 for grinding
  Stock No                   Size                  Price                                                                    Stock No                   Size                  Price
  268759                   5 litres                70.25      Ultracut 320 Cutting and Grinding Fluid                       268767                   20 litres              200.71
  268760                   20 litres              239.31        Stock No                  Size                  Price
  268761                   60 litres              485.66
                                                                268765                  20 litres               276.57




                                                                                                                              Ultragrind Premium Grinding Fluid
           Ultracut 390H Cutting Fluid                                                                                    Rocol Ultragrind Premium is a high performance,
                                                              Ultracut 620 Cutting and Grinding Fluid                     synthetic, water mix, grinding fluid. Features include
Rocol Ultracut 390H is a high quality, semi-synthetic,                                                                    • Designed for medium/heavy grinding operations
general purpose, water mix, cutting fluid.                    Rocol Ultracut 620 is a chlorine free, semi-synthetic,      • Forms a translucent green emulsion which provides a
Features include                                              extreme pressure, water mix, cutting and grinding fluid.      clear view of the workpiece
• Designed for light/medium cutting operations                Features include                                            • Contains wetting agents and lubricity additives
• Forms a translucent green micro-emulsion which              • Designed to provide superior performance in               • Very low foaming
  provides a clear view of the workpiece                        medium/severe cutting and grinding operations             • Suitable for surface, centreless and cylindrical grinding
• Low foaming                                                 • Contains no chlorinated additives                           operations
• Suitable for a wide range of ferrous and non-ferrous        • Forms a translucent blue emulsion which provides a        • Use with all types of grinding wheels, wet abrasive
  metals, in particular cast iron                               clear view of the workpiece                                 belts and abrasive cut-off wheels
• Extends tool life                                           • Low foaming                                               • Formulated to ensure rapid settlement of grinding fines,
• Excellent residual corrosion protection                     • Suitable for a wide range of ferrous and non-ferrous        giving a clean flow of liquid to the workpiece
• Inherently resistant to degradation                           metals                                                    • Promotes excellent surface finish
• Long and predictable sump life                              • Extends tool life                                         • Oil free; keeps wheels clean and open
• Emulsifies tramp oil                                        • Promotes excellent surface finish                         • Excellent residual corrosion protection
• Pleasant and safe to use                                    • Allows increased machining rates                          • Long and predictable sump life
• Compatible with hard and soft water                         • Excellent residual corrosion protection                   • Nitrite free
• Recommended dilution between 30:1 and 40:1 in water         • Inhibits staining                                         • Low odour
                                                              • Inherently resistant to degradation                       • Recommended dilution between 40:1 and 70:1 in water
Ultracut 390 H Cutting Fluid                                  • Long and predictable sump life
  Stock No                   Size                  Price
                                                              • Emulsifies tramp oil                                      Ultragrind Premium Metal Grinding Fluid
                                                              • Recommended dilutions between 20:1 and 40:1 for
                                                                cutting and 40:1 and 55:1 for grinding                      Stock No                   Size                  Price
  268762                   5 litres                70.88
  268763                   20 litres              229.11                                                                    268768                   20 litres              245.73
  268764                   60 litres              485.66      Ultracut 620 Chlorine Free Cutting
                                                              and Grinding Fluid
                                                                Stock No                  Size                  Price
                                                                268766                  20 litres               278.28
160                           ROCOL METALWORKING FLUIDS




    Ultragrind Carbide Grinding Fluid                          Ultraguard SC Machine Tool System Cleaner                      Ultraguard BX Bactericide Additive
Rocol Ultragrind Carbide is a high performance,               Rocol Ultraguard SC is a biocide-based cleanser and          Rocol Ultraguard BX is a biocide additive that can be
synthetic, water mix, grinding fluid. Features include        slime remover for use with Rocol water mix cutting fluids.   safely used with all mineral, semi-synthetic, and synthetic
• Designed specifically for grinding tungsten carbide         Features include                                             water mix metalworking fluids. Features include
• Forms a translucent green emulsion which provides a         • Cleans and disinfects in one operation                     • Provides long lasting protection against bacterial
  clear view of the workpiece                                 • Effective against aerobic and anaerobic bacteria,            contamination
• Low foaming                                                    yeasts and moulds                                         • Simple and easy to use
• Suitable for surface, centreless and cylindrical grinding   • Reaches all areas where the cutting fluid flows            • Broad spectrum activity
  operations with all types of grinding wheel                 • Use prior to recharging machine tools with fresh           • Maintains cutting fluid efficiency
• Formulated to ensure rapid settlement of grinding fines,       cutting/grinding fluid                                    • Reduces replacement and disposal costs
  giving a clean flow of liquid to the workpiece              • Use while the machine is in operation, so there is no      • Eliminates odours caused by bacterial growth
• Promotes excellent surface finish                              loss of production time                                   • Improves working conditions
• Oil free; keeps wheels clean and open                       • Prevents contaminations of fresh fluid and extends its     • Dilution ratio 1000:1
• Excellent residual corrosion protection                        sump life
                                                                                                                             Stock No                  Size                   Price
• Contains inhibitors to minimise cobalt leeching             • Dilution ratio 100:1
• Long sump life                                                                                                             268777                    1 litre                36.68
                                                                Stock No                  Size                  Price
• Low odour
• Recommended dilution between 15:1 and 30:1 in water           268773                   1 litre                33.63
                                                                268774                  5 litres               137.53
Ultragrind Carbide Metal Grinding Fluid                         268775                  20 litres              503.34
  Stock No                   Size                  Price
  268769                   20 litres              280.11




                                                                                                                                Ultraguard FX Fungicide Additive
                                                                                                                           Rocol Ultraguard FX is a fungicide additive that can be
                                                                                                                           used with all types of water mix metalworking fluids.
                                                               Ultraguard PF Machine Tool Purging Fluid                    Features include
                                                                                                                           • Provides long lasting protection against fungus
                                                              Rocol Ultraguard PF is a purging fluid formulated to clean   • Eliminates fungal growths which can cause blockages
             Multisol Cutting Fluid                           and disinfect the most heavily contaminated machine tool       and lead to costly downtime
                                                              coolant systems. Features include                            • Simple and easy to use
Rocol Multisol is a general purpose, water mix, cutting       • Cleans and disinfects in one operation                     • Reduces replacement and disposal costs
fluid suitable for use on a wide range of machines.           • Use where heavy bacteria, yeast, mould or fungal           • Improves working conditions
Features include                                                contamination exists                                       • Dilution ratio 1000:1
• Designed for light/medium cutting operations                • Loosens sludge and slime deposits                            Stock No                  Size                   Price
• Use on ferrous and non-ferrous metals                       • Use prior to recharging machine tools with fresh
• High refined mineral oil content ensures good lubricity       cutting/grinding fluid                                       268778                    1 litre                36.68
   during machining                                           • Suitable for use in spent cutting fluid or clean water
• Excellent residual corrosion protection                     • Dilution ratio 50:1
• Low odour
• Pleasant and safe to use                                      Stock No                  Size                  Price
• Economical in use                                             268776                   1 litre                28.33
• Recommended dilution between 15:1 and 25:1 in water

Multisol Cutting Fluid
  Stock No                   Size                  Price
  268770                   5 litres                26.02
  268771                   20 litres              101.46
  268772                   60 litres              204.69




           Prices shown are indicative prices. For current prices call 01224 620944
                              or email: sales@gibbtools.co.uk
                                           ROCOL METALWORKING LUBRICANTS & FLUIDS                                                                                          161




 Ultraguard AF Non-Silicone Antifoam                                      Rocol Refractometer                               Ultraglide Slideway Lubricant Spray
Rocol Ultraguard AF is a non-silicone antifoam designed     Many machine shop problems involving water mix cutting        Rocol Ultraglide Spray has been formulated to lubricate
for the treatment of all types of water mix metalworking    fluids are caused by incorrect emulsion strength. Rocol's     and protect machine tool slideways, collets and chucks.
fluids. Features include                                    Refractometer helps address this problem.                     Features include
• Contains a blend of high molecular weight polyglycol      Features include                                              • Ideal for machines without automatic lubrication
   derivatives and water                                    • Provides immediate and accurate concentration                 systems
• Effectively controls excessive foaming                       analysis of water mix cutting fluids and makes dilution    • Easy to apply to inaccessible areas
• Silicone free                                                control simple                                             • Excellent adhesive qualities ensure effective
• Economical in use                                                                                                         lubrication over long periods
                                                              Stock No               Description               Price
• Dilution ratio 10,000:1                                                                                                 • High film strength prevents metal to metal contact
                                                              268782                    52060                 218.32      • Prevents 'stick slip' and ensures smooth and precise
  Stock No                  Size                 Price
                                                                                                                            movement
  268779                   1 litre                40.73                                                                   • Excellent resistance to wash off
                                                                                                                          • Protects against corrosion and staining
                                                                                                                          • Contains no silicone
                                                                                                                          • Viscosity ISO VG 68
                                                                                                                            Stock No                  Size                  Price
                                                                                                                            268785               400 ml Aerosol             14.19




                                                             Ultraglide X5 Machine Tool Slideway Lubricant
        Rocol Automatic Fluid Mixer                         Rocol Ultraglide X5 has been formulated to lubricate and
                                                            protect machine tool slideway systems. Features include
Many machine shop problems involving water mix cutting      • Excellent adhesive qualities ensure effective
fluids are caused by incorrect emulsion strength. Rocol's     lubrication over long periods
Automatic Fluid Mixer helps address this problem.           • High film strength prevents metal to metal contact
Features include                                            • Prevents 'stick slip', eliminates chatter and vibration
• Accurately mixes and dispenses water mix cutting and        and ensures smooth and precise movement                     Ultraclean 2000 Multi-Purpose Cleaner
   grinding fluids from the barrel                          • Excellent resistance to wash off
• To ensure absolute accuracy, check the mixed solution     • Rapid demulsification - separates quickly from cutting      Rocol Ultraclean 2000 is a multi-purpose, water based
   with a Rocol Refractometer                                 fluid and is easily removed, eliminating the formation of   alkaline cleaner. Features include
• If you use the Automatic Fluid Mixer direct from the        grease-like deposits in oilways and under machine tool      • Formulated primarily for the fast and easy removal of
   mains tap, there is a risk of backflow into the water      slideways                                                     oils and greases
   system. Use the Rocol E-Gap to prevent this risk.        • Protects against corrosion and staining                     • Dilution range up to 100:1 in water, depending on the
   The E-Gap complies with WRAS (Water Regulations          • Contains no silicone                                          degree of contamination
   Advisory Scheme)                                         • Viscosity ISO VG 68                                         • Hand apply by brush or trigger spray
                                                                                                                          • Suitable for dip tanks, ultrasonic baths and pressure
  Stock No              Description              Price        Stock No                   Size                  Price
                                                                                                                            washers
  268780           Automatic Fluid Mixer         193.79       268783                   5 litres                27.58      • Use on virtually any non-porous surface
  268781                 E-Gap                    89.09       268784                   20 litres               76.82      • Cleans components, tools, machines and engines
                                                                                                                          • Lifts oil and grease from concrete floors
                                                                                                                          • Leaves no residue when rinsed away
                                                                                                                          • Free from chlorinated or petroleum based solvents
                                                                                                                            Stock No                  Size                  Price
                                                                                                                            268786                   5 litres               25.12
162                          ROCOL METALWORKING FLUIDS




 Accu-Lube LB-2000 Machining Lubricant                         Accu-Lube LB-5000 Machining Lubricant                          Ultraform 1060 Cold Metal Forming Lubricant
Rocol Accu-Lube LB-2000 is a premium performance              Rocol Accu-Lube LB-5000 is a premium performance               Rocol Ultraform 1060 is a high performance, fast drying,
micro-lubricant designed to be used in conjunction with       micro-lubricant designed to be used in conjunction with        cold metal forming lubricant. Features include
the Accu-Lube Micro-Lubrication System. This precisely        the Accu-Lube Micro-Lubrication System. This precisely         • Suitable for light duty forming operations on a wide
controlled delivery system maximises cutting tool             controlled delivery system maximises cutting tool                range of ferrous and non-ferrous metals, including a
performance while minimising fluid use. Features include      performance while minimising fluid use. Features include         range of galvanised and zintec coated steels
• Formulated from a unique blend of highly refined, natural   • Light viscosity lubricant, formulated from highly refined,   • Contains extreme pressure additives which prevent
  base oils to provide 'near dry' machining operations          naturally based, fatty alcohols to provide 'near dry'          pick up between the work piece and tool
• Suitable for heavy duty cutting operations in ferrous         machining operations                                         • Reduces splitting and scoring
  and non-ferrous metals, including general machining,        • Suitable for light to medium duty general machining          • Minimises 'slug pulling' on thin gauge materials
  drilling and tapping up to 16 mm diameter, sawing of          and sawing operations of non-ferrous metals,                 • Promotes maximum tool/die life
  solids up to 15 mm diameter, broaching and spline             especially aluminium                                         • Fast drying, vanishing film lubricant that usually
  rolling                                                     • Extends tool life                                              requires no cleaning prior to the finishing process
• Extends tool life                                           • Improves productivity
• Improves productivity                                       • Reduces fluid consumption and eliminates waste disposal      Ultraform 1060 Neat Oil Forming Lubricant
• Reduces fluid consumption and eliminates waste disposal     • Non irritating, non toxic, natural base
                                                                                                                               Stock No                  Size                  Price
• Non irritating, non toxic, natural base                     • Contains no biocide, sulphur, nitrite or chlorine
• Contains no biocide, sulphur, nitrite or chlorine           • Safer and cleaner working conditions                           268791                  20 litres              204.80
• Safer and cleaner working conditions                        • Reduced degreasing costs
• Reduced degreasing costs                                    • No component staining
• No component staining                                       • Requires no cleaning off prior to heat treating
• Must be cleaned off prior to heat treating
                                                              Accu-Lube LB-5000 'Near Dry' Machining
Accu-Lube LB-2000 'Near Dry' Machining                        Lubricant
Lubricant                                                       Stock No                   Size                   Price
  Stock No                  Size                   Price        268789                    5 litres               120.71
  268787                   5 litres                95.37




                                                                                                                              Ultraform 1050 Cold Metal Forming Lubricant
                                                                                                                             Rocol Ultraform 1050 is a high performance, low viscosity,
                                                                                                                             cold metal forming lubricant. Features include
                                                                                                                             • Suitable for light to medium duty forming operations on
                                                                                                                               a wide range of ferrous and non-ferrous metals,
                                                                                                                               including a range of galvanised and zintec coated steels
                                                                                                                             • Contains extreme pressure additives which prevent
                                                                                                                               pick up between the work piece and tool
                                                                                                                             • Reduces splitting and scoring
                                                               Accu-Lube LB-10000 Machining Lubricant                        • Minimises 'slug pulling' on thin gauge materials
 Accu-Lube LB-4000 Machining Lubricant                                                                                       • Promotes maximum tool/die life
                                                              Rocol Accu-Lube LB-10000 is a premium performance
                                                              micro-lubricant designed to be used in conjunction with        • Low residue lubricant that normally requires no
Rocol Accu-Lube LB-4000 is a premium performance
                                                              the Accu-Lube Micro-Lubricant System. This precisely             cleaning prior to the finishing process
micro-lubricant designed to be used in conjunction with
                                                              controlled delivery system maximises cutting tool              • Suitable for heat degreasing where absolute
the Accu-Lube Micro-Lubrication System. This precisely
                                                              performance while minimising fluid use. Features include         cleanliness is required
controlled delivery system maximises cutting tool
performance while minimising fluid use. Features include      • Formulated from a unique blend of highly refined,
• Formulated from a unique blend of highly refined,             natural base oils to provide 'near dry' machining            Ultraform 1050 Neat Oil Forming Lubricant
  naturally derived, fatty acids to provide 'near dry'          operations                                                     Stock No                  Size                  Price
  machining operations                                        • Suitable for medium duty sawing of non-ferrous metals
                                                                and medium duty milling, drilling and tapping of ferrous       268792                  20 litres              195.44
• Suitable for light to medium duty sawing of non-ferrous
  metals and light duty milling, drilling, tapping and          and non-ferrous metals
  punching of non-ferrous metals                              • Extends tool life
• Extends tool life                                           • Improves productivity
• Improves productivity                                       • Reduces fluid consumption and eliminates waste
• Reduces fluid consumption and eliminates waste disposal       disposal
• Non irritating, non toxic, natural base                     • Non irritating, non toxic, natural base                                  Large volume user
• Contains no biocide, sulphur, nitrite or chlorine           • Contains no biocide, sulphur, nitrite or chlorine
• Safer and cleaner working conditions                        • Safer and cleaner working conditions                                  and require a quotation?
• Reduced degreasing costs                                    • Reduced degreasing costs
• No component staining                                       • No component staining                                             Call Grahame our Sales Director
• Requires no cleaning off prior to heat treating             • Must be cleaned off prior to heat treating                                on 01224 615030
Accu-Lube LB-4000 'Near Dry' Machining                        Accu-Lube LB-10000 'Near Dry' Machining
Lubricant                                                     Lubricant
  Stock No                  Size                   Price        Stock No                   Size                   Price
  268788                   5 litres               114.56        268790                    5 litres                55.62
                                                            ROCOL METALWORKING LUBRICANTS                                                                                163




 Ultraform 1030 Cold Metal Forming Lubricant                 Ultraform 2020 Cold Metal Forming Lubricant               Ultraform Advantage Cold Metal Forming Lubricant
Rocol Ultraform 1030 is a high performance, medium          Rocol Ultraform 2020 is a high performance, extreme        Rocol Ultraform Advantage is a high performance,
viscosity, cold metal forming lubricant. Features include   pressure, cold metal forming lubricant                     extreme pressure, chlorine free, cold metal forming
• Suitable for the most severe and demanding forming        • Formulated for heavy duty forming operations on          lubricant. Unique product with maximum versatility.
  operations on a wide range of ferrous and non-ferrous       ferrous and non-ferrous metals                           Features include
  metals                                                    • Superior load carrying characteristics reduce pick up    • Formulated for all cold metal pressing and drawing
• Ultimate performance on high carbon steels and              between the work piece and tool                            operations
  stainless steel alloys                                    • Excellent wetting properties                             • For the most difficult operations, the product should be
• Suitable for high speed progressive pierce, form and      • Reduces splitting and scoring                              used neat to give the highest levels of performance
  drawing operations                                        • Allows increased production rates                        • For light/medium operations, the product should be
• Contains extreme pressure additives which prevent         • Suitable for use with carbide tooling                      diluted with oil or water for outstanding economy
  pick up between the work piece and tool                   • Promotes maximum tool/die life                           • Suitable for all metals
• Reduces splitting and scoring                             • Can be used neat or diluted with water or mineral oil.   • Reduces pick up, splitting and scoring for minimal scrap
• Promotes maximum tool/die life                              Can be diluted up to 10:1 with water, depending on the   • Allows increased production rates
• For less severe operations, Ultraform 1030 can be           severity of the operation                                • Promotes maximum tool/die life
  diluted with equal parts of mineral oil                                                                              • Chlorine free
• No volatile content                                       Ultraform 2020 Water Extendible Oil                        • Easily cleaned prior to the finishing process
• Leaves an oily film which provides excellent corrosion    Forming Lubricant                                          • Can be diluted up to 10:1 with oil or water, depending
  protection                                                                                                             upon the particular operation
                                                              Stock No                  Size                 Price
• Easily cleaned prior to the finishing process
                                                              268795                  20 litres              233.48    Ultraform Advantage Chlorine Free Oil
Ultraform 1030 Neat Oil Forming Lubricant                                                                              Forming Lubricant
  Stock No                  Size                  Price                                                                  Stock No                   Size                  Price
  268793                  20 litres              178.04                                                                  268797                   20 litres              316.31




                                                             Ultraform 2010 Cold Metal Forming Lubricant
                                                            Rocol Ultraform 2010 is a high performance, extreme
                                                            pressure, cold metal forming lubricant
 Ultraform 2030 Cold Metal Forming Lubricant                • Formulated for the most severe forming operations on      Metalflo 2064 Hot Metal Forging Lubricant
                                                              heavy gauge ferrous and non-ferrous metals, including
Rocol Ultraform 2030 is a high performance, extreme           stainless steels, titanium and nickel alloys             Rocol Metalflo 2064 is a semi-colloidal dispersion of
pressure, cold metal forming lubricant                      • Superior load carrying characteristics reduce pick up    graphite in water, containing both inorganic and organic
• Suitable for light/medium duty operations on ferrous        between the work piece and tool                          binders. Features include
  and non-ferrous metals                                    • Reduces splitting and scoring                            • Formulated to lubricate closed dies in ferrous forging or
• Formulated for a wide range of pressworking               • Allows increased production rates                          as a parting agent in gravity die casting
  operations, from medium gauge drawing and forming to      • Suitable for use with carbide tooling                    • Graphite has a limited range of particle size
  light gauge blanking and piercing                         • Promotes maximum tool/die life                           • Provides a film of uniform thickness and intermediate
• Superior load carrying characteristics reduce pick up     • Easily cleaned prior to the finishing process              hardness
  between the work piece and the tool                       • Not recommended for use in recirculating systems         • Provides optimum die lubrication and release
• Reduces splitting and scoring                             • Can be used neat or diluted with water or mineral oil.   • Withstands temperatures up to 650°C
• Allows increased production rates                           Can be diluted up to 5:1 with water, depending on the    • Economical in use
• Suitable for use with carbide tooling                       severity of the operation                                • May be applied neat by swab or brush. For optimum
• Promotes maximum tool/die life                                                                                         results apply by spray system after diluting with water
• Suitable for use in recirculating systems                 Ultraform 2010 Water Extendible Oil                        • Dilution ratios vary from 3:1 to 10:1 depending on the
• Can be used neat or diluted with water or mineral oil.    Forming Lubricant                                            particular task
  Can be diluted up to 10:1 with water, depending on the
  severity of the operation                                   Stock No                  Size                 Price       Stock No                   Size                  Price
                                                              268796                  20 litres              263.17      268798                    18 kg                 302.43
Ultraform 2030 Water Extendible Oil
Forming Lubricant
  Stock No                  Size                  Price
  268794                  20 litres              255.74
164                          ROCOL METALWORKING LUBRICANTS & CLEANERS




 Metalflo 1204 Hot Metal Forging Lubricant                    Metalflo 20 Hot Metal Forging Lubricant                                     Foam Cleaner Spray
Rocol Metalflo 1204 is a dispersion of graphite in a non-    Rocol Metalflo 20 is a dispersion of graphite in alcohol       Rocol Foam Cleaner Spray is a highly versatile, fast
melting grease. Features include                             with small additions of active agents to aid wetting and       acting, foaming cleaner. Features include
• Formulated for the lubrication of dies and pegs in hot     bonding of the graphite to metal surfaces.                     • Foaming action ensures long contact time for effective
  brass and copper stamping where maximum heat               Features include                                                 cleaning
  resistance is required                                     • Designed for use as a pre-treatment to provide a dry         • Quickly cuts through dirt, grease and grime
• Can be used for the lubrication of bearings conducting       film to all forms of hot metalworking tooling                • Pleasant and economical to use
  electrical current on seam welding machines                • Rapid drying film                                            • Ideal for non-porous surfaces
• Easily applied as a thin film                              • When coating is completely dry, it may be lightly            • Non toxic
• Can be applied to very hot surfaces without running          burnished for improved surface finish                        • Suitable for food/clean environments
• Promotes good metal flow ensuring complete die filling     • Promotes good metal flow ensuring complete die filling       • Does not contain mineral hydrocarbons, animal derived
• Minimal staining; easily removed by normal pickling        • Ensures excellent component release                            materials, nut oils or genetically modified ingredients
  processes                                                  • Extends die life                                             • Specifications/Approvals
• For optimum results, apply, without dilution, by swab or   • Can be applied manually by brush where only small              NSF A1 registered (no. 123858)
  brush directly to the die surface                            areas are to be treated. For best results, it is               FDA Group 21 CFR 178.3570
                                                               recommended that a spray system is used                        DIN V 10517
  Stock No                  Size                  Price
                                                             • To facilitate spraying, Metalflo 20 should be diluted by 1
                                                                                                                              Stock No                  Size                 Price
  268799                    18 kg                 327.41       part alcohol to between 2 and 5 parts product
                                                                                                                              268802              400 ml Aerosol               4.55
                                                               Stock No                   Size                   Price
                                                               268801                    5 litres               152.00




 Metalflo 4000 Hot Metal Forging Lubricant
                                                                                                                                          Heavy Duty Cleaner
Rocol Metalflo 4000 is a dispersion of graphite in water.
Features include                                                            Electra Clean Spray                             Rocol Heavy Duty Cleaner is a water washable, multi-
• Used for the lubrication of all types of hot metal                                                                        purpose, workshop cleaner and degreaser.
  working tools                                              Rocol Electra Clean Spray is a high performance, rapid         Features include
• Particularly suitable for drop hammer and press forging    dry cleaner for electrical and electronic equipment and        • Powerful solvent blend that emulsifies grease and
• Forms an even bonded coating on hot metal surfaces         parts. Features include                                          workshop grime
• Suitable for die temperatures in excess of 400°C           • Fast penetration and superior wetting action                 • Evaporates slowly to allow longer soaking times on
• Controls die temperature and extends die life              • Quickly removes dirt, oils, grease and grime                   heavier contamination
• Promotes good metal flow ensuring complete die filling     • Safe to use on most surfaces                                 • Residue is easily removed by wiping, washing or hosing
• Suitable for use over a wide range of billet weight and    • Fast drying                                                    with water
  component complexity                                       • No rinsing and no residue                                    • Safe on metals, most plastics and most paints
• Minimum carry over on non-ferrous metals                   • Non toxic and non conductive                                 • Ideal for cleaning machinery, concrete, flooring and
• Fume free                                                  • Suitable for food/clean environments                           paving
• Can be applied manually, but for best results it is        • Does not contain mineral hydrocarbons, animal derived        • Does not contain chlorinated solvents
  recommended that a spray system is used                      materials, nut oils or genetically modified ingredients      • Available in bulk fluid or convenient aerosol form
• Can be used neat or diluted with up to 20 parts water,     • Specifications/Approvals
                                                                                                                              Stock No                  Size                 Price
  depending on the severity of the operation                   NSF K2 registered (no. 124471)
                                                               FDA Group 21 CFR 178.3570                                      268803              300 ml Aerosol               9.38
  Stock No                  Size                  Price
                                                               DIN V 10517                                                    268804                  5 litres                34.71
  268800                  20 litres               140.07
                                                               Stock No                   Size                   Price
                                                               261960                300 ml Aerosol              10.77




                                    Trade Counter open 8.15 am - 5.30 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
                                      ROCOL CLEANERS & PIPE JOINTING COMPOUNDS                                                                                               165




 Industrial Cleaner Rapid Drying Spray                        Foliac Graphite Pipe Jointing Compound                       Foliac Super Red Pipe Jointing Compound
Rocol Industrial Cleaner Rapid Dry is a multi-purpose,       Rocol Graphite Pipe Jointing Compound is a setting pipe      Rocol Super Red Pipe Jointing Compound is a thin, easy
fast drying, workshop cleaner and degreaser.                 sealant for metallic threaded and flanged joints.            to apply, oil resistant, hard setting sealant.
Features include                                             Features include                                             Features include
• Extremely powerful blend of cleaning solvents that         • Applications include steam, air, water and natural gas     • Applications include petrol, diesel, fuel oils, mineral
  rapidly removes grease, oil and general workshop           • Sets semi-hard but flexible                                  oils, white spirit, alcohol, air, water and steam
  grime                                                      • Suitable for pressures up to 1400 psi                      • Sets hard but flexible
• Evaporates quickly                                         • Temperature range: -20°C to +450°C                         • Suitable for pressures up to 150 psi
• No rinsing and no residue                                  • Resists vibration and thermal expansion                    • Temperature range: -20°C to +250°C
• Safe on metals, most plastics and most paints              • Easy to break and clean from joints                        • Resists vibration and thermal expansion
• Does not contain chlorinated solvents                      • Pressure test after a minimum of 24 hours                  • Pressure test after a minimum of 24 hours
• Fitted with 360° spray system for all angle use
                                                               Stock No                  Size                  Price        Stock No                   Size                  Price
  Stock No                  Size                  Price
                                                               268808                    375 g                   7.25       268810                    375 g                    7.20
  268805               300 ml Aerosol               9.62




                                                              Foliac Manganese Pipe Jointing Compound                             Gasseal Non-Setting Sealant
                        Scrubs
                                                             Rocol Manganese Pipe Jointing Compound is a setting          Rocol Gasseal is an off-white, non-setting sealant for use
Rocol Scrubs are effective, heavy duty, waterless, hand      pipe sealant for metallic threaded and flanged joints.       on pipe and face joints. Features include
cleaning wipes. Features include                             Sets harder and stronger than graphite compounds and         • Applications include low pressure LPG and natural gas
• Tough towel with citrus-based formula works fast to        is more resistant to high temperatures and pressures.          (gas appliances and their auxiliary equipment only), air,
  loosen, dissolve and absorb dirt, grease, paints, oils     Features include                                               water and steam
  and adhesives                                              • Applications include steam, air, water, LPG, natural gas   • Suitable for pressures up to 2.9 psi
• Towel has one side textured for heavy duty cleaning           and alcohol                                               • Temperature range: -20°C to +125°C
• Will not transfer soil back onto your hands                • Sets hard but flexible                                     • Non-corrosive to aluminium, brass, copper, low carbon
• Conditions and softens hands                               • Suitable for pressures up to 2800 psi                        steel and zinc
• One step cleaning process that leaves your hands truly     • Temperature range: -20°C to +600°C                         • Compatible with foam forming leak testers
  clean                                                      • Resists vibration and thermal expansion                    • Resists vibration
• Also suitable for cleaning tools, equipment and work       • Pressure test after a minimum of 24 hours                  • Joints can be assembled and pressure tested
  surfaces                                                                                                                  immediately
• Available in a convenient pack or a tough durable bucket     Stock No                  Size                  Price
                                                                                                                          • Conforms to BS EN 751-2: 1997 Part 2 Class B for use
  Stock No                  Size                  Price        268809                    400 g                   6.90       with gas appliances and their auxiliary equipment
                                                                                                                          • Suitable for use by CORGI registered gas installers
  268806                 Pack of 15                 3.16                                                                  • Not suitable for high pressure storage installations or
  268807                  Tub of 72                13.68                                                                    LPG in liquid form
                                                                                                                            Stock No                   Size                  Price
                                                                                                                            268811                    300 g                    9.27




                                   Phone Lines open 7.30 am - 6.00 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
166                           ROCOL GAS INDUSTRY PRODUCTS




           Oilseal Hardsetting Sealant                                  Hylomar Jointing Compound                                           Leak Detector Solution
Rocol Oilseal is a white thixotropic liquid for sealing        Rocol Hylomar is a high performance jointing compound           Rocol Leak Detector Solution efficiently identifies the
metallic threaded and face joints. Features include            for use on precision made components where a thin film          location of even the smallest, positive pressure, gas leak.
• Applications include mineral oils, vegetable oils, petrol,   of material is required for the sealing of close tolerance      Features include
  diesel, fuel oils, paraffin and white spirits                mating surfaces such as flanged joints. Features include        • Suitable for use with these common gases: natural
• Sets hard but flexible                                       • Applications include mineral oil, petrol, diesel, paraffin,     gas, town gas, compressed air, butane, propane,
• Suitable for pressures up to 2000 psi                          fuel oils, air and water                                        acetylene, chlorine, hydrogen and oxygen
• Temperature range: -50°C to +200°C                           • Particularly suited to automotive industry applications       • Specially formulated fluid leaves a thin uniform film of
• Resists vibration and thermal expansion                      • Non-setting and non-hardening                                   surface-active agents. Bubbles in the applied film
• Pressure test after a minimum of 6 hours                     • Suitable for pressures up to 500 psi                            indicate the location of the leak
• Check sealing performance with stainless steel before        • Temperature range: -50°C to +200°C                            • Easy application by brush or trigger spray
  use                                                          • Resists vibration and thermal expansion                       • Low chlorine content to ensure maximum plastic
                                                               • Pressure test after 30 minutes                                  compatibility
  Stock No                   Size                   Price
                                                               • Hylomar grade: Universal Blue PL32/M                          • Compatible with most metals and plastics
  268812                     300 g                    9.60                                                                     • Suitable for use by CORGI registered gas installers;
                                                                 Stock No                    Size                   Price
                                                                                                                                 meets the product specification given in IGE/UP/1B
                                                                 268814                     100 g                     7.76       Edition 2
                                                                                                                               • Conforms with oxygen compatibility requirements of
                                                                                                                                 MIL-PRF-25567E
                                                                                                                                 Stock No                   Size                  Price
                                                                                                                                 268816                   5 litres                 56.83




              Pipeseal PTFE Liquid
Rocol Pipeseal PTFE Liquid is a soft white liquid                             Leak Detector Spray
containing PTFE for sealing threaded connections.
Features include                                               Rocol Leak Detector Spray efficiently identifies the
• Applications include air, water, steam, mineral oils,        location of even the smallest, positive pressure, gas leak.
  vegetable oils, paraffin, white spirit and ammonia           Features include
  refrigerant.                                                 • Suitable for use with these common gases: natural                        M23660 Gas Tap Lubricant
• Sets hard but flexible                                         gas, town gas, compressed air, butane, propane,
• Suitable for pressures up to 400 psi                           acetylene, chlorine, hydrogen and oxygen                      Rocol M23660 Gas Tap Lubricant is a non-melting,
• Temperature range: -50°C to +250°C                           • Aerosol enables fast and easy application                     organically modified clay thickened grease, containing a
• Resists thermal expansion                                    • Convenient and accurate in difficult to reach areas           high concentration of molybdenum disulphide.
• Can replace PTFE thread tape in many applications            • No wastage or spillage                                        Developed in conjunction with cooker and tap
• Pressure test after a minimum of 6 hours                     • Low chlorine content to ensure maximum plastic                manufacturers for the effective lubrication and sealing of
• Only use where a good mechanical seal exists                   compatibility                                                 gas taps and taper plug cocks
                                                               • Compatible with most metals and plastics                      • Suitable for the lubrication of taper gas taps operating
  Stock No                   Size                   Price      • Suitable for use by CORGI registered gas installers;            with first, second and third family gases
  268813                     300 g                   26.68       meets the product specification given in IGE/UP/1B            • Enables compliance with BS 5494 1978, service no. 6
                                                                 Edition 2                                                       (30,000 operations)
                                                               • Conforms with oxygen compatibility requirements of            • Used by British Gas PLC for over 30 years
                                                                 MIL-PRF-25567E                                                • Suitable for continuous use in temperatures up to 120°C
                                                                                                                               • Good lubricating and sealing properties
                                                                 Stock No                    Size                   Price
                                                                                                                               • Excellent anti-wear and anti-seize properties
                                                                 268815                300 ml Aerosol                 8.87
                                                                                                                                 Stock No                   Size                  Price
                                                                                                                                 268817                     50 g                    8.60




                                                Looking for an item not listed? Call our Sales Team on 01224 620944
                                                                                     LOCTITE THREADLOCKERS                                                            167




          Loctite 222 Threadlocker                                  Loctite 248 Threadlocker                                    Loctite 2701 Threadlocker
Low strength Screwlock 222 is used for locking metal      Medium strength 248 is a semi-solid stick used for         High strength Studlock 2701 is used for locking threaded
threaded fasteners where easy dismantling is required.    locking metal threaded fasteners where disassembly with    metal fasteners where regular removal for maintenance
Also used on low strength metals such as aluminium and    normal hand tools is required for servicing and repair.    is not required. Features include
brass which could break during disassembly. Features      Features include                                           • Use on all metal fasteners including stainless steels
include                                                   • Effective on all types of threaded fastener                 and those with protective coatings such as zinc
• Converts any fastener into a locking fastener           • Reduces the inventory costs associated with other        • Recommended for permanently locking studs on engine
• Reduces the inventory costs associated with other         thread locking devices                                      blocks and pump housings
  thread locking devices                                  • Convenient application with no migration. Use on         • Clean and easy to apply
• Clean and easy to apply                                   components in difficult locations, such as overhead or   • Resists extreme vibration
• Resists vibration                                         under machinery                                          • Good resistance to hot oil
• Completely seals threads against corrosion and leaks    • Superior vibration resistance                            • Completely seals threads against corrosion and leaks
• Temperature range: -55°C to +150°C                      • Completely seals threads against corrosion and leaks     • Improved Loctite 270
• Cure time to functional strength: 6 hours               • Long term temperature resistance: +150°C                 • Long term temperature resistance: +150°C
• NSF P1 registered (no. 123002)                          • Cure time to functional strength: 6 hours                • Cure time to functional strength: 6 hours
                                                          • Certified to ANSI/NSF Standard 61                        • WRC Approval 040303
 Stock No                  Size                 Price
                                                           Stock No                  Size                 Price        Stock No                  Size                 Price
 262156                   10 ml                  5.61
 262157                   50 ml                 25.05      262162                    9g                    6.28        262197                    50 ml                 26.32
 262158                   250 ml               107.99      262163                    19 g                 10.68        262164                   250 ml                115.76




          Loctite 243 Threadlocker                                  Loctite 270 Threadlocker                                    Loctite 268 Threadlocker
Medium strength Nutlock 243 is used for locking metal     High strength Studlock 270 is used for locking threaded    High strength 268 is a semi-solid stick used for locking
threaded fasteners where disassembly with normal hand     metal fasteners where regular removal for maintenance      threaded metal fasteners where regular removal for
tools is required for servicing and repair. Features      is not required. Features include                          maintenance is not required. Features include
include                                                   • Recommended for permanently locking studs on engine      • Effective on all types of threaded metal fasteners
• Effective on all types of threaded fastener                blocks and pump housings                                • Recommended for suspension bolts, motor
• Oil tolerant; use on fasteners contaminated with oil    • Clean and easy to apply                                    transmission and pump mounts and bearing cap bolts
• Reduces the inventory costs associated with other       • Resists extreme vibration                                  and studs
  thread locking devices                                  • Completely seals threads against corrosion and leaks     • Convenient application with no migration. Use on
• Clean and easy to apply                                 • Long term temperature resistance: +150°C                   components in difficult locations, such as overhead or
• Superior vibration resistance                           • Cure time to functional strength: 6 hours                  under machinery
• Completely seals threads against corrosion and leaks;   • NSF P1 registered (no. 123006)                           • Superior vibration resistance
  use on oil drain plugs                                                                                             • Completely seals threads against corrosion and leaks
                                                           Stock No                  Size                 Price      • Long term temperature resistance: +150°C
• Temperature range: -55°C to +150°C
• Cure time to functional strength: 2 hours                262196                   10 ml                  5.78      • Cure time to functional strength: 24 hours
• NSF P1 registered (no. 123000)                           262166                   50 ml                 25.74        Stock No                  Size                 Price
• Certified to ANSI/NSF Standard 61                        262167                   250 ml               111.17
                                                                                                                       262168                    9g                     6.27
 Stock No                  Size                 Price                                                                  262169                    19 g                  10.67
 262194                    10 ml                 5.89
 262195                   50 ml                 26.32
 262171                   250 ml               115.76




                                                                                                                          All prices are in pounds sterling
                                                                                                                                  and exclude V.A.T.
168                            LOCTITE THREADLOCKERS & THREAD SEALANTS




            Loctite 290 Threadlocker                                       Loctite 542 Thread Sealant                                   Loctite 572 Thread Sealant
Loctite 290 is a wicking grade liquid used for locking          Loctite 542 is a curing liquid used for sealing fine         Loctite 572 is a slow curing gel used for sealing coarse
preassembled fasteners. Features include                        threaded metal pipes up to 3/4". Features include            threaded metal pipes up to 3". Features include
• Use on metal threaded fasteners after assembly                • Recommended for fine threaded fittings as used in          • Recommended for all coarse metal threads where slow
• Recommended for locking fasteners after final                   hydraulic and pneumatic installations and small fittings     cure is required for adjusting the alignment of fittings
  adjustment                                                      in general                                                   and valves
• Medium/high strength                                          • Good mechanical strength ensures superior vibration        • Provides an instant low pressure seal
• Clean and easy to use                                           resistance                                                 • Simple fast application improves productivity
• Resists vibration                                             • Simple fast application improves productivity              • Will not creep shrink or shred
• Completely seals threads against corrosion and leaks          • Will not creep, shrink or shred                            • Easily disassembled with normal tools
• Use on threads up to M6                                       • Replaces tapes, pastes, compression joints and             • Meets BS 6956 type B for sealing gas fittings
• Long term temperature resistance: +150°C                        expensive self-sealing fittings
                                                                                                                               Stock No                  Size                   Price
• Cure time to functional strength: 3 hours                     • Can be disassembled with normal tools
                                                                • Carries the German DVGW approval (NG-5146 AR 0855)           262177                    50 ml                  13.16
  Stock No                    Size                   Price
                                                                • Tested in accordance with EN751-1                            262178                   250 ml                  39.90
  262172                     10 ml                    5.61
                                                                  Stock No                  Size                  Price
  262173                     50 ml                   25.05
  262174                     250 ml                 107.99        262159                   10 ml                    5.61
                                                                  262160                   50 ml                   25.05
                                                                  262161                   250 ml                 107.99




                                                                                                                                        Loctite 567 Thread Sealant
                                                                                                                             Loctite 567 is a curing gel used for sealing coarse
           Loctite 5331 Thread Sealant                                                                                       threaded stainless steel pipes. Features include
                                                                                                                             • High lubricating properties prevent galling on stainless
Loctite 5331 is a curing gel used for sealing threaded                     Loctite 577 Thread Sealant                          steel, aluminium and all other metal pipe threads and
plastic or plastic/metal fittings carrying hot or cold water.                                                                  fittings
Features include                                                Loctite 577 is a curing gel used for sealing coarse          • Prevents loosening and leakage from shock and
• Recommended for industrial and agricultural plastic           threaded metal pipes up to 3". Features include                vibration
  pipe water delivery and drainage systems                      • General purpose thread sealant for all coarse metal        • Simple fast application improves productivity
• Provides an instant low pressure seal. Cures to                 threads. Suitable for applications at low temperatures     • Will not creep, shrink or shred
  provide a full pressure seal                                    e.g. outdoor plant maintenance                             • Easily disassembled with normal tools
• Simple fast application improves productivity                 • Provides an instant low pressure seal. Cures quickly to    • Use Activator 7649 to improve cure speed
• Will not creep, shrink or shred                                 seal up to pipe burst pressure
                                                                                                                               Stock No                  Size                   Price
• Easily disassembled with normal tools                         • Good mechanical strength ensures superior vibration
• WRC approved for use with potable water up to 85°C              resistance                                                   262198                    50 ml                  18.03
• NSF P1 registered (no. 123620)                                • Simple fast application improves productivity                262179                   250 ml                  73.15
                                                                • Will not creep, shrink or shred
  Stock No                    Size                   Price      • Replaces tapes, paste and hemp
  262175                     100 ml                  13.71      • Can be disassembled with normal tools
                                                                • Carries the German DVGW approval (NG-5146 AR 0621)
                                                                • Tested in accordance with EN751-1
                                                                • NSF P1 registered (no. 123001)
                                                                  Stock No                  Size                  Price
                                                                  262199                   50 ml                   17.19
                                                                  262176                   250 ml                  69.78




                      All prices and descriptions correct at time of publication
                              and are subject to change without notice
                                                     LOCTITE THREAD SEALANTS & GASKETING                                                                                  169




           Loctite 561 Thread Sealant                                    Loctite 5203 Gasketing                                      Loctite 574 Gasketing
Loctite 561 is a curing semi-solid stick used for sealing    Loctite 5203 gasketing paste is used for coating and       Multi-Gasket 574 is a general purpose flange sealant that
coarse threaded metal pipes up to 3". Features include       re-using existing gaskets to improve sealing. Features     replaces traditional pre-cut gaskets. Features include
• Recommended for all coarse metal threads where             include                                                    • Recommended for use on rigid metal parts such as
  disassembly is required. Ideal for use in a broad range    • Used for low strength, flexible, metal/metal seals         cast iron components, pump housings and gearbox
  of industries, including chemical processing, waste        • Instant low pressure seal                                  flanges
  water treatment and automotive                             • Fills scratches and shallow gouges, reducing the need    • One product used for any shape or size of gasket
• Provides an instant low pressure seal                        for a fine surface finish on flanges                     • No shimming effect and no gasket relaxation
• Convenient application with no migration. Use on           • Excellent oil resistance                                 • Fills scratches and shallow gouges
  components in difficult locations, such as overhead or     • Long term temperature resistance: +150°C                 • Instant low pressure seal
  under machinery                                            • Parts can be disassembled easily, even after extended    • Excellent oil and water/glycol resistance
• Will not creep, shrink or shred                              service                                                  • Long term temperature resistance: +150°C
• Easily disassembled with normal tools                                                                                 • Parts can be disassembled easily, even after extended
                                                              Stock No                  Size                  Price
• Certified to ANSI/NSF Standard 61                                                                                       service
                                                              262184                    50 ml                 19.24
  Stock No                  Size                  Price                                                                   Stock No                  Size                   Price
                                                              262185               300 ml Cartridge          105.29
  262181                    19 g                    6.91                                                                  263600                    50 ml                  17.19
                                                                                                                          263601                   160 ml                  45.45
                                                                                                                          263602              250 ml Cartridge             69.79




                                                                          Loctite 548 Gasketing
      Loctite 55 Thread Sealant Cord
                                                             Loctite 548 gasketing is a semi-solid stick used to make
Loctite 55 is a cord used for sealing threaded plastic,      formed-in-place gaskets. Features include                               Loctite 518 Gasketing
metal or plastic/metal pipe fittings up to 4". Features      • Recommended for all types of rigid iron, steel and
include                                                        aluminium flanges                                        Loctite 518 is a flexible, fast cure, flange sealant that
• Provides an instant full pressure seal                     • One product used for any shape or size of gasket         replaces traditional pre-cut gaskets. Features include
• Clean and easy to apply                                    • No shimming effect and no gasket relaxation              • Recommended for use on rigid iron, steel and
• Fittings can be backed off for alignment without fear of   • Fills scratches and shallow gouges                         aluminium flanges. Use where flexibility is required e.g.
  leakage                                                    • Convenient, clean and easy to apply                        aluminium gearbox and engine castings
• Replaces PTFE tape, paste and hemp                         • Medium strength instant seal                             • One product used for any shape or size of gasket
• Specifications/Approvals                                   • Good oil and water/glycol resistance                     • No shimming effect and no gasket relaxation
  WRC approved for use with potable water up to 85°C         • Long term temperature resistance: +150°C                 • Fills scratches and shallow gouges
  Conforms with BS 6920                                      • Parts can be disassembled easily, even after extended    • Instant low pressure seal
  KTW approval for cold and hot water                          service                                                  • Excellent oil and water/glycol resistance
  Carries the German DVGW approval (DV-5142 AW 0166)                                                                    • Long term temperature resistance: +150°C
  Conforms with DIN 30660                                     Stock No                  Size                  Price
                                                                                                                        • Parts can be disassembled easily, even after extended
  Tested in accordance with EN751-2 Class ARp                 262186                     9g                     6.27      service
  Certified to ANSI/NSF Standard 61                           262187                     18 g                  10.10
                                                                                                                          Stock No                  Size                   Price
  Stock No                 Length                 Price
                                                                                                                          263603                   50 ml                   19.25
  262182                 50 Metres                  2.71                                                                  263604                   65 ml                   23.51
  262183                 150 Metres                 7.45                                                                  263605              300 ml Cartridge            101.39
170                         LOCTITE GASKETING & RETAINERS




             Loctite 510 Gasketing                                     Loctite 5699 Gasketing                                        Loctite 660 Retainer
Loctite 510 is a high temperature flange sealant that     Loctite 5699 is a flexible flange sealant used where        Loctite 660 Quick Metal is used for securing loose or
replaces traditional pre-cut gaskets. Features include    resistance to water/glycol is required. Features include    worn cylindrical assemblies. Features include
• Recommended for sealing rigid flanges where high        • Recommended for sealing all types of flanges,             • Strength maintained over a range of clearances,
  temperature and chemical resistance is required           including stamped sheet metal where water/glycol            allowing worn or scored parts to be reused without
• One product used for any shape or size of gasket          resistance is required                                      machining
• No shimming effect and no gasket relaxation             • Use on metal and plastic components                       • Fills gaps up to 0.5 mm
• Fills scratches and shallow gouges                      • One product used for any shape or size of gasket          • High strength
• Instant low pressure seal                               • No shimming effect and no gasket relaxation               • Eliminates fretting and prevents corrosion
• Excellent oil and water/glycol resistance               • Good gap filling; can be used on gaps greater than        • 100% surface contact distributes load and stress
• Long term temperature resistance up to 200°C              0.25 mm                                                     evenly over the joint
• Parts can be disassembled easily, even after extended   • Instant low pressure seal                                 • Use with Loctite Activator 7240
  service                                                 • Sealant remains flexible                                  • Long term temperature resistance: +150°C
• NSF P1 registered (no. 123007)                          • Good oil resistance and excellent water/glycol            • NSF P1 registered (no. 123704)
                                                            resistance
 Stock No                  Size                 Price                                                                   Stock No                   Size                   Price
                                                          • Long term temperature resistance: +200°C
 263606                   50 ml                  25.05    • Parts can be disassembled easily, even after extended       263613                     50 ml                  25.05
 263607                   160 ml                 73.54      service
 263608              250 ml Cartridge           110.60
                                                            Stock No                  Size                  Price
                                                            263610              300 ml Cartridge            27.05




                                                                                                                                     Loctite 641 Retainer
            Loctite 5910 Gasketing                                                                                    Loctite 641 is used for securing cylindrical parts that will
                                                                                                                      need subsequent dismantling. Features include
Loctite 5910 is replacement for cork and paper cut               Loctite 534 Gasket Positioner                        • Recommended for the retention of bearings onto shafts
gaskets on flanges and stamped sheet metal covers.                                                                      and into housings
Features include                                          Loctite 534 is a semi-solid adhesive/sealant for holding    • Medium strength
• Recommended for use where high vibration or flexing     pre-cut gaskets in place during assembly. Features          • Slip fitting allows easy assembly
  occurs                                                  include                                                     • Eliminates fretting and prevents corrosion
• Use on metal, plastic and painted components            • Recommended for all types of rigid and flexible flanges   • 100% surface contact distributes load and stress
• One product used for any shape or size of gasket        • Can be applied to all rubber, cork, paper and metal         evenly over the joint
• No shimming effect and no gasket relaxation               gaskets                                                   • Diametrical clearance up to 0.1 mm
• Good gap filling; can be used on gaps greater than      • Convenient, clean and easy to apply                       • Long term temperature resistance: +150°C
  0.25 mm                                                 • Instant low pressure seal
                                                                                                                        Stock No                   Size                   Price
• Instant low pressure seal                               • Good oil and water/glycol resistance
• Sealant remains flexible                                • Long term temperature resistance: +150°C                    263614                    10 ml                    5.61
• Excellent oil resistance                                                                                              263615                     50 ml                  25.05
                                                            Stock No                  Size                  Price
• Long term temperature resistance: +200°C                                                                              263616                    250 ml                 107.35
• Parts can be disassembled easily, even after extended     263611                    9g                     6.27
  service                                                   263612                    19 g                  10.67
 Stock No                  Size                 Price
 263609              300 ml Cartridge            24.40
                                                   LOCTITE RETAINERS & INSTANT ADHESIVES                                                                                 171




              Loctite 668 Retainer                                        Loctite 638 Retainer                                  Loctite 406 Instant Adhesive
Loctite 668 is a semi-solid stick used for retaining        Loctite 638 is a high strength retainer that gives best     Loctite 406 is used for rapid bonding of rubbers and
cylindrical parts. Features include                         resistance to dynamic, axial and radial loads. Features     plastics. Features include
• Recommended for all kinds of retaining applications,      include                                                     • Bonds rubbers (including EPDM), plastics and
  especially where access is difficult                      • Recommended for retaining shafts, gears, pulleys and        elastomers
• Medium strength                                             similar cylindrical parts                                 • Use with Loctite 7239 Primer to bond PE, PP, PTFE, TVP
• Convenient, clean and easy to apply                       • Maximum strength and fast cure                              and thermoplastic rubbers
• Slip fitting allows easy assembly                         • Enables slip fitted parts to withstand higher loadings    • Fixtures in seconds
• Eliminates fretting and prevents corrosion                • Can be used to augment traditional assembly methods       • High strength clear bond
• 100% surface contact distributes load and stress            thus increasing strength
                                                                                                                          Stock No                  Size                  Price
  evenly over the joint                                     • Eliminates fretting and prevents corrosion
• Diametrical clearance up to 0.15 mm                       • 100% surface contact distributes load and stress            262180                   20 g                   17.58
• Long term temperature resistance: +150°C                    evenly over the joint                                       263626                   50 g                   40.20
                                                            • Diametrical clearance up to 0.25 mm                         263627                   500 g                 319.30
  Stock No                  Size                  Price
                                                            • Long term temperature resistance: +150°C
  263617                    9g                      6.27    • Specifications/Approvals
  263618                    19 g                   10.68      KWT approval for cold and hot water
                                                              WRC approval for use with potable water
                                                              NSF P1 registered (no. 123010)
                                                              Stock No                  Size                  Price
                                                              263621                   50 ml                   25.05
                                                              263622                   250 ml                 107.99




                                                                                                                                Loctite 454 Instant Adhesive
                                                                                                                        Loctite 454 is a general purpose instant adhesive.
              Loctite 648 Retainer                                                                                      Features include
                                                                                                                        • Bonds metals, composite materials, wood, cork, foam,
Loctite 648 is a high temperature retainer for securing                                                                   leather, card, paper and unglazed ceramics
cylindrical parts. Features include                                                                                     • Suitable for use on porous substrates
• Recommended for retaining parts with a clearance or                                                                   • Non-drip gel, ideal for vertical and overhead surfaces
  interference fit i.e. bushes, bearings, seals, fans and                                                               • Good gap fill; suitable for gaps over 0.1 mm
  liners                                                                  Loctite 603 Retainer                          • Fixtures in seconds
• High strength, high temperature and fast cure                                                                         • High strength clear bond
• Slip fitting allows easy assembly                         Loctite 603 is a low viscosity, oil tolerant retainer for   • NSF P1 registered (no. 123009)
• Can be used to augment traditional assembly methods       securing cylindrical parts. Features include
  thus increasing strength                                  • Used for retaining close fitting coaxial parts              Stock No                  Size                  Price
• Eliminates fretting and prevents corrosion                • Tested and approved for use on bearings                     263628               10 g Syringe               13.39
• 100% surface contact distributes load and stress          • Oil tolerant, can be used on as-received parts and          263629                 20 g Tube                20.21
  evenly over the joint                                       oil-impregnated bushes                                      263630              300 g Cartridge            246.15
• Diametrical clearance up to 0.15 mm                       • High strength and fast cure
• Long term temperature resistance: +175°C                  • Slip fitting allows easy assembly
                                                            • Can be used to augment traditional assembly methods
  Stock No                  Size                  Price
                                                              thus increasing strength
  263619                   50 ml                   25.05    • Eliminates fretting and prevents corrosion
  263620                   250 ml                 107.99    • 100% surface contact distributes load and stress
                                                              evenly over the joint
                                                            • Diametrical clearance up to 0.1 mm
                                                            • Long term temperature resistance: +150°C
                                                            • NSF P1 registered (no. 123003)
                                                              Stock No                  Size                  Price
                                                              263623                   10 ml                    5.89
                                                              263624                   50 ml                   26.32
                                                              263625                   250 ml                 115.76
172                           LOCTITE INSTANT ADHESIVES




         Loctite 480 Instant Adhesive                                 Loctite 4860 Instant Adhesive                                   Loctite 401 Instant Adhesive
Loctite 480 is a black, rubber toughened, instant             Loctite 4860 is a high viscosity, flexible, instant adhesive.   Loctite 401 is a general purpose, instant adhesive.
adhesive. Features include                                    Features include                                                Features include
• Bonds metal to metal and metal to rubber                    • Specially formulated for the assembly and repair of           • Bonds most substrates including plastics, rubber,
• Suitable for applications where high peel strength is         flexible materials and components                               metals, card and wood
  required or shock loads are present                         • Bonds metals, plastics and elastomers. Particularly           • Fixtures in seconds
• High strength                                                 suited for bonding porous or absorbent materials such         • High strength clear bond
                                                                as paper, leather and fabrics                                 • NSF P1 registered (no. 123011)
  Stock No                   Size                   Price
                                                              • Used in the manufacture, maintenance and repair of
                                                                                                                                Stock No                   Size                  Price
  263631                     20 g                   17.58       flexible gaskets, gaitors and seals, loudspeaker
  263632                     500 g                 319.30       assemblies and industrial clothing and footwear                 263640                     3g                      2.78
                                                              • Fixtures in seconds                                             262170                    20 g                    17.58
                                                              • High strength transparent bond                                  263641                    50 g                    38.73
                                                                                                                                263642                    500 g                  319.30
                                                                Stock No                    Size                    Price
                                                                263635                      20 g                    17.58
                                                                263636                      500 g                  319.30




        Loctite 4850 Instant Adhesive
Loctite 4850 is a medium viscosity, flexible, instant
adhesive. Features include                                                                                                            Loctite 431 Instant Adhesive
• Specially formulated for the assembly and repair of
  flexible materials and components                                                                                           Loctite 431 is a high viscosity, general purpose, instant
• Bonds metals, plastics and elastomers. Particularly                 Loctite 4062 Instant Adhesive                           adhesive. Features include
  suited for bonding porous or absorbent materials such                                                                       • Particularly suitable for bonding porous or absorbent
  as paper, leather and fabrics.                              Loctite 4062 is a low viscosity, ultra fast curing, instant       materials such as wood, paper, leather, cork and
• Used in the manufacture, maintenance and repair of          adhesive. Features include                                        fabrics
  flexible gaskets, gaitors and seals as well as industrial   • Ideal for the highest speed bonding of plastics, rubber       • Also bonds a wide range of metals, plastics and
  clothing and footwear                                         and metals                                                      elastomers
• Fixtures in seconds                                         • Low viscosity - particularly suitable for bonding             • Fixtures in seconds
• High strength transparent bond                                applications where controlled penetration of adhesive         • High strength clear bond
                                                                is required                                                     Stock No                   Size                  Price
  Stock No                   Size                   Price
                                                              • Fixtures in seconds
  263633                     20 g                   17.58     • High strength transparent bond                                  263643                    20 g                    17.58
  263634                     500 g                 319.30                                                                       263644                    500 g                  319.30
                                                                Stock No                    Size                    Price
                                                                263637                      20 g                    17.58
                                                                263638                      50 g                    40.20
                                                                263639                      500 g                  319.30
                                                                                  LOCTITE INSTANT ADHESIVES                                                                  173




        Loctite 460 Instant Adhesive                                  Loctite 438 Instant Adhesive                                 Loctite 495 Instant Adhesive
Loctite 460 is a low odour, low bloom, instant adhesive.      Loctite 438 is a black, rubber toughened, instant           Loctite 495 is a low viscosity, general purpose, instant
Features include                                              adhesive. Features include                                  adhesive. Features include
• Provides rapid bonding of a wide range of materials,        • Designed to bond metals, plastics and elastomers          • Bonds metals, plastics and elastomers
  including metals, plastics, elastomers, wood, paper,        • Also suitable for bonding porous, absorbent and acidic    • Fast fixture time
  leather and fabric                                            surfaces                                                  • High strength clear bond
• Formulated for use where cosmetic appearance is             • High peel strength
                                                                                                                            Stock No                   Size                   Price
  important. Will not leave the white mark or bloom that      • High resistance to impact and shock loads
  other instant adhesives can leave on materials              • Good resistance in humid and chemical environments          262190                     20 g                   18.84
• Pleasant to use; free from irritating odours                • Fast fixture time on a large range of materials             263656                     50 g                   41.56
• Fixtures in seconds                                         • High bond strength, especially on metals and plastics       263657                     100 g                  83.11
• High strength clear bond                                                                                                  263658                     500 g                 349.38
                                                                Stock No                  Size                   Price
  Stock No                  Size                   Price
                                                                263650                    20 g                   17.58
  263645                    20 g                   20.22        263651                    500 g                 319.30
  263646                    50 g                   44.52
  263647                    500 g                 371.33




                                                                                                                                   Loctite 415 Instant Adhesive
                                                                                                                          Loctite 415 is a high viscosity, general purpose, instant
                                                                      Loctite 496 Instant Adhesive                        adhesive that is particularly suited to bonding metals.
                                                                                                                          Features include
        Loctite 435 Instant Adhesive                          Loctite 496 is a general purpose instant adhesive that is   • Bonds metals, plastics and elastomers
                                                              particularly suited to bonding metals. Features include     • Particularly high strength bond on metals
Loctite 435 is a clear, rubber toughened, instant adhesive.   • Bonds metals, plastics and elastomers                     • Fast fixture time
Features include                                              • Particularly high strength bond on metals                 • High strength clear bond
• Designed to bond metals, plastics and elastomers            • Fast fixture time                                           Stock No                   Size                   Price
• Also suitable for bonding porous, absorbent and acidic      • High strength clear bond
  surfaces                                                                                                                  263659                     20 g                   18.84
• High peel strength                                            Stock No                  Size                   Price      263660                     50 g                   41.56
• High resistance to impact and shock loads                     263652                    20 g                   16.40      263661                     500 g                 349.25
• Good resistance in humid and chemical environments            263653                    50 g                   36.22
• Fast fixture time on a large range of materials               263654                    100 g                  72.40
• High bond strength, especially on metals and plastics         263655                    500 g                 304.36
  Stock No                  Size                   Price
  263648                    20 g                   17.58
  263649                    500 g                 319.30
174                          LOCTITE STRUCTURAL ADHESIVES




    Loctite 330 Multi-Bond Structural                            Loctite 326 Structural Adhesive                              Loctite 3421 Structural Adhesive
                Adhesive
                                                           Loctite 326 is an all-purpose structural adhesive that        Loctite 3421 is a two-component epoxy adhesive.
Loctite 330 is a general purpose, fast curing, toughened   offers the strength of an epoxy with the speed of an          General purpose, flowable adhesive for bonding large
adhesive. Features include                                 instant adhesive. Features include                            surfaces that require a long open time (working time).
• Bonds metals, wood, ferrite, ceramics and plastics,      • Bonds metals, glass and ferrites                            Features include
  including PC, PVC, phenolic and acrylic                  • Use for bonding different materials (e.g. stainless steel   • Bonds metals, ceramics, wood and rigid plastics
• Ideal for bonding dissimilar substrates                    to aluminium and ferrites to plated metals)                 • High strength and high moisture resistance
• Good solvent and moisture resistance                     • Cures in minutes; ideal for applications requiring fast     • Ideal for bonding water pipes, boat interiors and
• Tough, flexible, impact resistant bond                     fixturing                                                     laminating surf boards
• High peel strength                                       • Good moisture and solvent resistance                        • Suitable for use in the fabrication of metal products
• Use with Loctite Activator 7386                          • Ideal for rigid close-fitting bonds                           which will be put through a paint bake cycle after
• NSF P1 registered (no. 123005)                           • Use with Loctite Activator 7649                               assembly
                                                                                                                         • Working life 180 minutes, fixture time 240 minutes
  Stock No                  Size                  Price      Stock No                   Size                   Price
                                                                                                                         • Gap fill up to 1 mm
  263662                   50 ml                   7.65      263666                    50 ml                   25.04
  263663              315 ml Cartridge            41.63      263667                    250 ml                 107.99     3421 A&B General Purpose Epoxy Adhesive
  263664                  5 litres               384.35                                                                    Stock No                  Size                   Price
                                                                                                                           263669             50 ml Dual Cartridge           9.23
                                                                                                                           263670            200 ml Dual Cartridge          17.87




                                                                Loctite 3030 Structural Adhesive
    Loctite 330 Multi-Bond Structural
                                                           Loctite 3030 is a two-component acrylic adhesive
               Adhesive Kit                                specifically designed to bond thermoplastics. Features
Loctite 330 Multi-Bond Kit contains a 500 ml pack of the   include                                                            Loctite 3423 Structural Adhesive
330 Adhesive c/w an 18 ml Activator Spray. Features        • Formulated specifically for use on HDPE, LDPE and PP.
include                                                    • Also suitable for other plastics, including ABS, PVC,       Loctite 3423 is a general purpose, two-component epoxy
• Bonds metals, wood, ferrite, ceramics, smooth              polycarbonate and polyolefin                                adhesive, suitable for gap fitting and vertical
  concrete and plastics, including PC, PVC, phenolic and   • Bonds to many other substrates as well, so it can be        applications. Features include
  acrylic                                                    used to bond thermoplastics to other materials              • Bonds metals, ceramics, wood and rigid plastics
• Ideal for bonding dissimilar substrates                  • Fast curing; fixture time is less than 10 minutes           • High strength and high chemical resistance
• Good solvent and moisture resistance                     • Good resistance to many chemicals                           • Thixotropic properties make this adhesive system
• Tough, flexible, impact resistant bond                   • Thixotropic nature reduces migration                          suitable for bonding vertical surfaces
• High peel strength                                       • Contains 0.25 mm glass beads to control bondline            • When cured, the adhesive can be sanded to a smooth
• Supplied complete with Loctite Activator Spray 7388        thickness                                                     finish
• NSF P1 registered (no. 123005)                                                                                         • Working life 70 minutes, fixture time 180 minutes
                                                             Stock No                   Size                   Price
                                                                                                                         • Gap fill up to 3 mm
  Stock No                  Size                  Price      263668             35 ml Dual Cartridge           16.80
  263665                50 ml / 18 ml             13.08                                                                  3423 A&B General Purpose Epoxy Adhesive
                                                                                                                           Stock No                  Size                   Price
                                                                                                                           263671            50 ml Dual Cartridge           10.32
                                                                                                                           263672            200 ml Dual Cartridge          22.32
                                 LOCTITE STRUCTURAL ADHESIVES & EPOXY PUTTY                                                                                                  175




     Loctite 3430 Structural Adhesive                             Loctite 3422 Structural Adhesive                             Loctite 9492 Structural Adhesive
Loctite 3430 is a five-minute, two-component, epoxy          Loctite 3422 is a five-minute, two-component, epoxy          Loctite 9492 is a high temperature resistant, two-
adhesive, suitable for applications requiring an optically   adhesive. General purpose, non-sag adhesive, suitable        component, epoxy adhesive. Multi-purpose epoxy with
clear bond line. Features include                            for a wide range of substrates. Features include             many applications. Features include
• Bonds metals, ceramics, wood and rigid plastics            • Bonds metals, ceramics, glass, most rigid plastics and     • Bonds and repairs a wide variety of materials. Ideal for
• Ultra clear bond line, ideal for bonding glass,              wood                                                         bonding electronic components and mesh to frames
  decorative panels and displays and general repair          • High strength on a wide range of substrates                • High strength bond with good impact resistant
  applications                                               • Ideal for metal assemblies with a subsequent paint           properties
• High strength on a wide range of substrates                  bake cycle (180°C for 30 minutes)                          • High temperature and thermal shock resistance
• Gap filling properties make this adhesive system suit      • Gap filling properties make this adhesive suitable for     • Excellent solvent resistance
  able for rough or poorly fitting surfaces                    rough or poorly fitting surfaces                           • Very low outgassing
• Cures rapidly at room temperature                          • Cures rapidly at room temperature                          • Excellent electrical insulator
• Working life 4-7 minutes, fixture time 12 minutes          • Working life 3 minutes, fixture time 7 minutes             • Working life 15 minutes, fixture time 75 minutes
• Gap fill up to 3 mm                                        • Gap fill up to 3 mm                                        • Gap fill up to 1 mm
                                                                                                                          • Shear strength @ 20°C (GBMS): 20 N/m²
3430 A&B Clear Rapid Epoxy Adhesive                          3422 A&B General Purpose Rapid Epoxy                         • Shear strength @ 120°C (GBMS): 4.2 N/m²
                                                                                                                          • Operating temperature: up to 180°C
  Stock No                   Size                  Price     Adhesive
  263673             24 ml Twin Syringe              6.93      Stock No                  Size                   Price     9492 A&B High Temperature Epoxy
                                                               263675            50 ml Dual Cartridge            9.98     Adhesive
                                                               263676            200 ml Dual Cartridge          20.92
                                                                                                                            Stock No                   Size                  Price
                                                                                                                            263678             50 ml Dual Cartridge            9.47
                                                                                                                            263679            400 ml Dual Cartridge           27.90




     Loctite 3450 Structural Adhesive
Loctite 3450 is a five-minute, two-component, epoxy
adhesive, suitable for bonding and filling damaged                Loctite 9466 Structural Adhesive
components. Features include
                                                             Loctite 9466 is a toughened, two-component, epoxy
• Bonds metals, ceramics, wood and rigid plastic
• High strength, steel filled adhesive, ideal for bonding
                                                             adhesive with extended work life. High performance                 Loctite 3463 Magic Metal Stick
                                                             epoxy, ideal for general industrial applications. Features
  metal surfaces
                                                             include                                                      Loctite 3463 is a versatile, single component, easy to use,
• Good chemical resistance and heat ageing properties
                                                             • Bonds a wide variety of substrates, including metals,      steel filled, epoxy repair putty. Use for fast, but long-
• Gap filling properties make this adhesive system
                                                               ceramics and most plastics                                 lasting emergency repairs. Features include
  suitable for rough or poorly fitting surfaces
                                                             • Tough bond with high peel resistance and high shear        • Good adhesion to most metal surfaces
• Cures rapidly at room temperature
                                                               strength                                                   • Adheres to damp surfaces and cures under water
• Working life 4-6 minutes, fixture time 12 minutes
                                                             • Resistant to a wide range of chemicals and solvents        • Cures to a steel-like material that can be drilled,
• Gap fill up to 3 mm
                                                             • Excellent electrical insulator                               sanded and painted
                                                             • Extended working life allowing adjustment to               • Ideal for sealing leaking tanks and pipes, filling
3450 A&B Steel Filled Rapid Epoxy                              components during assembly                                   oversized bolt holes, smoothing welds and repairing
Adhesive                                                     • Working life 60 minutes, fixture time 180 minutes            small cracks in castings
                                                             • Gap fill up to 3 mm                                        • Working life 3 minutes, fixture time 10 minutes
  Stock No                   Size                  Price
                                                             • Shear strength (GBMS): 37N/mm²                             • Operating temperature range: -30°C to +120°C
  263674             25 ml Twin Syringe             11.41    • Peel strength (GBMS): 8.0N/mm²                             • ANSI/NSF approved for use with potable water up to
                                                                                                                            82°C
                                                             9466 A&B Toughened Epoxy Adhesive
                                                               Stock No                  Size                   Price
                                                                                                                          3463 Emergency Repair Epoxy Putty
                                                                                                                            Stock No                   Size                  Price
                                                               263677            50 ml Dual Cartridge            9.88
                                                                                                                            263680                    114 g                   12.08




                   Prices shown are indicative prices. For current prices call 01224 620944 or email: sales@gibbtools.co.uk
176                          LOCTITE EPOXY PUTTY




           Loctite 3471 Metal Set S1                                    Loctite 3473 Metal Set S3                                    Loctite 3479 Metal Set HTA
Loctite 3471 is a steel filled, two-component, epoxy putty   Loctite 3473 is a fast curing, steel filled, two-component,   Loctite 3479 is an aluminium filled, two-component, epoxy
used for repairing and rebuilding worn or damaged metal      epoxy putty used for emergency repairing and rebuilding       putty used for repairing and rebuilding worn or damaged
parts. Features include                                      worn or damaged metal parts. Features include                 metal parts. Features include
• Multi-purpose industrial maintenance product with          • Multi-purpose industrial maintenance product with           • High temperature resistant; use on metal parts in high
  many applications. Ideal for repairing pipes and             many applications. Ideal for emergency repairs when           operating temperature applications
  castings as well as cracks in housings and machine           downtime is an issue                                        • Cures to a metal-like material that can be machined,
  parts                                                      • Cures to a steel-like material that can be machined,          drilled and tapped
• Cures to a steel-like material that can be machined,         drilled and tapped                                          • Excellent resistance to many chemicals and solvents
  drilled or tapped                                          • Excellent resistance to many chemicals and solvents         • High compressive strength
• Excellent resistance to many chemicals and solvents        • High compressive strength                                   • Low shrinkage on cure (0.2%)
• High compressive strength                                  • Does not rust                                               • Lighter weight and non-rusting
• Low shrinkage on cure (0.1%)                               • Shrinkage on cure: 0.5%                                     • Working life 40 minutes, fixture time 150 minutes
• Does not rust                                              • Working life 6 minutes, fixture time 15 minutes             • Shear Strength (GBMS): 20N/mm²
• Working life 45 minutes, fixture time 180 minutes          • Shear strength (GBMS): 20 N/mm²                             • Compressive Strength: 90N/mm²
• Shear strength (GBMS): 20N/mm²                             • Compressive strength: 60N/mm²                               • Operating temperature range: -20°C to +190°C
• Compressive strength: 70N/mm²                              • Operating temperature range: -20°C to +120°C
• Operating temperature range: -20°C to +120°C                                                                             3479 A&B Aluminium Filled High
                                                             3473 A&B Steel Filled Rapid Epoxy Putty                       Temperature Epoxy Putty
3471 A&B Steel Filled Epoxy Putty                              Stock No                   Size                   Price
                                                                                                                            Stock No                   Size                 Price
  Stock No                  Size                   Price
                                                               263683                 500 g Tub Kit              26.98
                                                                                                                            263685                500 g Tub Kit              28.23
  263681                500 g Tub Kit              26.98




                                                                        Loctite 3475 Metal Set A1                                    Loctite 3474 Metal Set M
           Loctite 3472 Metal Set S2
                                                             Loctite 3475 is an aluminium filled, two-component, epoxy
                                                                                                                           Loctite 3474 is a mineral filled, two-component, epoxy
Loctite 3472 is a pourable, steel filled, two-component,     putty used for repairing and rebuilding worn or damaged
                                                                                                                           putty which forms a self-lubricating surface to reduce
epoxy liquid used for repairing and rebuilding worn or       metal parts. Features include
                                                                                                                           sliding wear on moving parts. Features include
damaged metal parts. Features include                        • Multi-purpose industrial maintenance product with
                                                                                                                           • Ideal for repairing metallic surfaces under friction
• Multi-purpose industrial maintenance product with            many applications. Ideal for repairing castings and
                                                                                                                           • High resistance to wear
  many applications. Ideal for making moulds, models,          cracks in housings and machine parts
                                                                                                                           • Excellent resistance to many chemicals and solvents
  tools and fixtures                                         • Cures to a metal-like material that can be machined,
                                                                                                                           • High compressive strength
• Cures to a steel-like material that can be machined,         drilled and tapped
                                                                                                                           • Low shrinkage on cure (0.1%)
  drilled and tapped                                         • Excellent resistance to many chemicals and solvents
                                                                                                                           • Does not rust
• Excellent resistance to many chemicals and solvents        • High compressive strength
                                                                                                                           • Working life 45 minutes, fixture time 180 minutes
• High compressive strength                                  • Low shrinkage on cure (0.1%)
                                                                                                                           • Shear strength (GBMS): 20N/mm²
• Low shrinkage on cure (0.1%)                               • Lighter weight and non-rusting
                                                                                                                           • Compressive strength: 70N/mm²
• Does not rust                                              • Working life 45 minutes, fixture time 180 minutes
                                                                                                                           • Operating temperature range: -20°C to +120°C
• Working life 45 minutes, fixture time 180 minutes          • Shear strength (GBMS): 20N/mm²
• Shear strength (GBMS): 25N/mm²                             • Compressive strength: 70N/mm²
• Compressive strength: 70N/mm²                              • Operating temperature range: -20°C to +120°C                3474 A&B Mineral Filled Wear Resistant
• Operating temperature range: -20°C to +120°C                                                                             Epoxy Putty
                                                             3475 A&B Aluminium Filled Epoxy Putty                          Stock No                   Size                 Price
3472 A&B Steel Filled Epoxy Liquid                             Stock No                   Size                   Price
                                                                                                                            263686                500 g Tub Kit              27.69
  Stock No                  Size                   Price       263684                 500 g Tub Kit              26.98
  263682                500 g Tub Kit              28.23
                                                   LOCTITE EPOXY PUTTY & FLEXIBLE SILICONE                                                                                       177




           Loctite 3478 Superior Metal                          Loctite 5399 Flexible Adhesive/Sealant                        Loctite 595 Flexible Adhesive/Sealant
Loctite 3478 is a ferro-silicon filled, two-component,          Loctite 5399 Red is a fast curing, high temperature,         Loctite 595 is a superior quality, flexible adhesive/sealant.
epoxy resin system used to repair worn surfaces.                flexible adhesive/sealant. Generally used for sealing        Features include
Features include                                                applications, but also used for bonding and for high         • Superior bonding and sealing properties to most
• Rebuilds worn parts fast, yet provides a long-lasting         temperature protection. Features include                       surfaces (not recommended for concrete)
  repair                                                        • Use for bonding and sealing applications where             • Resists ageing and weathering without hardening
• High ferro-silicon content                                       temperatures can reach 350°C                                shrinking or cracking
• Superior adhesion to substrate                                • Suitable for glass, metal and ceramics                     • Formulated to withstand extreme temperature cycling,
• Extremely resistant to corrosion, chemical attack and         • Applications include industrial ovens, ventilation           UV light and ozone
  abrasion                                                         systems, industrial heating equipment and stove           • Very good gap fill
• Ideal for restoring worn surfaces. Other applications            flues/chimneys                                            • Thixotropic nature means reduced migration of product
  include repairing leaks in pipes and elbows, fuel and         • Very good gap fill                                           after application
  gas tank holes, stripped threads, cracked battery cases       • Thixotropic nature means reduced migration of product      • Skin over time: 2 hours
  and leaking storage tanks                                        after application
• Working time 20 minutes, fixture time 6 hours                 • Skin over time: 5 minutes                                  595 Superior Quality Silicone Sealant
• Shear strength (GBMS): 17N/mm²                                • Operating temperature: up to 350°C
                                                                                                                               Stock No          Colour           Size            Price
• Operating temperature range: -20°C to +120°C
                                                                5399 High Temperature Flexible Silicone                        263694            Clear           310 ml           18.06
3478 A&B Epoxy Wearing Compound                                 Sealant                                                        263695            White           310 ml           18.06
                                                                                                                               263696            Black           310 ml           18.06
  Stock No                   Size                    Price        Stock No          Colour          Size           Price
  263687                 453 g Tub Kit               58.56        263692             Red           310 ml          12.14     595 Low Odour Superior Quality Silicone
                                                                                                                             Sealant
                                                                                                                               Stock No         Colour             Size           Price
                                                                                                                               263697            White            310 ml          25.09




Loctite 5366 Flexible Adhesive/Sealant                          Loctite 5398 Flexible Adhesive/Sealant
Loctite 5366 is a single component adhesive/sealant             Loctite 5398 Red is a liquid, high temperature
which cures to a flexible rubber. Features include              adhesive/sealant that cures to a flexible rubber.
• Bonds, seals and protects components subjected to             Generally used for sealing applications, but also used for
  shock and constant vibration                                  binding and for high temperature protection. Features
                                                                                                                             Loctite 598 Flexible Silicone Gasketing
• Resists twisting, flexing and thermal expansion and           include
  contraction                                                                                                                Loctite 598 Black is a high performance gasketing
                                                                • Use for bonding and sealing applications where             compound designed to provide reliable formed-in-place
• High temperature resistant; can be used to seal heat            temperatures can reach 350°C
  sources                                                                                                                    gaskets for mechanical assemblies. Features include
                                                                • Suitable for glass, metal and ceramics                     • Forms a tough, flexible, silicone rubber gasket
• Good weathering resistance                                    • Applications include sealing heat exchangers, steam
• Very good gap fill                                                                                                         • Resists ageing and thermal cycling without hardening,
                                                                  circuits, water heaters and in equipment such as             shrinking or cracking
• Especially suitable for glass, but also suitable for metal,     turbines and pumps. The product can also be used for
  ceramics, composites and most plastics                                                                                     • Good load bearing and shock absorbing characteristics
                                                                  protection and installation of electrical boxes            • Excellent resistance to engine oils. Good resistance to
• Skin over time: 5 minutes                                     • Liquid when uncured, ideal for sealing/potting
• Operating temperature range: -60°C to +250°C                                                                                 transmission fluids, alcohol and anti-freeze solutions
                                                                • Skin over time: 8-10 minutes                                 (Not recommended for parts in contact with petrol or
                                                                • Operating temperature: up to 350°C                           diesel)
5366/5367/5368 Flexible Silicone Sealant
                                                                                                                             • Applications include oil pans, transmission pans, valve
  Stock No Model No.          Colour       Size      Price      5398 High Temperature Flowable Flexible                        covers, valves and guides, timing gear covers and
  263688         5366         Clear       310 ml      8.47
                                                                Silicone Sealant                                               differential covers (Not recommended for use as a
  263689         5367         White       310 ml      8.47        Stock No          Colour          Size           Price       cylinder head gasket or head gasket sealant)
  263690         5368         Black       310 ml      8.47                                                                   • Complies with extended warranty requirements
                                                                  263693             Red           310 ml          13.49     • Thixotropic nature means reduced migration of product
                                                                                                                               after application
5375 Low Odour Flexible Silicone Sealant                                                                                     • Skin over time: 25 minutes
• Oxime cure                                                                                                                 • Operating temperature range: -50°C to +260°C
  Stock No Model No.          Colour       Size      Price                                                                   • Approved by GM, Ford and Fiat

  263691         5375         Clear       310 ml     10.20                                                                   598 High Temperature Flexible Silicone
                                                                                                                             Gasket Maker
                                                                                                                               Stock No          Colour            Size           Price
                                                                                                                               263698             Black           300 ml          24.42
178                          LOCTITE SILICONE GASKETING & SEALANTS




 Loctite 5999 Flexible Silicone Gasketing                     Loctite 5920 Flexible Silicone Gasketing                              Loctite Terostat MS939 Elastic
Loctite 5999 is a heavy bodied, high performance             Loctite 5920 Copper is a high performance, high
                                                                                                                                           Adhesive/Sealant
gasketing compound. Features include                         temperature, flange sealing and gasketing compound.             Loctite MS939 is a new generation MS (modified silane)
• Intended for design, service, manufacture and rebuild      Features include                                                polymer used for elastic bonding and sealing of joints and
  operations, especially in automotive powertrain            • Non-sag paste formulated for low volatility applications      seams. Features include
  applications                                               • Adheres to a wide range of substrates, including metal,       • Cures to a hard elastic (thermostat elastomer) that
• Low odour, non-corrosive and blow-out resistant              glass, natural and synthetic fibres, wood, ceramics,            provides rigidity as well as elasticity to many
• Outstanding dielectric properties                            other silicone rubbers, painted surfaces and many               constructions
• Exceptional thermal stability throughout its operational     plastics                                                      • Good adhesion without primer to a wide range of
  range                                                      • Applications include exhaust manifolds and all                  substrates
• Thixotropic nature means reduced migration of product        assemblies where an engine manufacturer                       • Can completely replace mechanical fixings, such as
  after application                                            recommends RTV sealant. Can also be used for                    screws and rivets, in many applications
• Skin over time: 30 minutes                                   electrical insulation applications                            • Applications include bonding sheet metal and
• Operating temperature: up to 200°C                         • Excellent high temperature resistance                           reinforced plastics, air-conditioning and ventilation,
                                                             • Very good gap fill. Use to fill voids and irregularities in     and clean room technology
5999 High Performance Silicone Gasketing                       surfaces for a positive seal                                  • Sag-resistant leading to high initial tack
                                                             • Thixotropic nature means reduced migration of product         • Free of isocyanates, solvents and silicones
  Stock No         Colour           Size          Price
                                                               after application                                             • Easy to apply, non-corrosive and odourless
  263699            Grey           300 ml          27.05     • Skin over time: 60 minutes                                    • Good weather and UV resistance; can be used for
                                                             • Operating temperature: up to 350°C                              interior and exterior applications
                                                             • Approved by GM, Ford and Toyota. This product meets           • Excellent paint compatibility; can be over-painted with
                                                               General Motors silicone volatility specifications               most paints
                                                                                                                             • Skin formation time: 10 minutes
                                                             5920 High Performance Silicone Gasket                           • Operating temperature range: -40°C to +100°C
                                                             Maker
                                                               Stock No          Colour            Size           Price      Loctite Terostat MS939 Elastic
                                                               263701            Copper           300 ml          27.05      Adhesive/Sealant
                                                                                                                               Stock No         Colour           Size          Price
                                                                                                                               263702            Black          310 ml          9.29
                                                                                                                               263703            White          310 ml          9.29
                                                                                                                               263704            Grey           310 ml          9.29




 Loctite 5699 Flexible Silicone Gasketing
Loctite 5699 Grey is a high performance flange sealing
and gasketing compound. Features include
• Forms a tough, flexible, silicone rubber gasket
• Recommended for sealing all types of flanges,
  including stamped sheet metal assemblies
• Excellent water/glycol resistance. Good oil resistance
• Applications include transmission housings, engine
  blocks, water jacket joints, water pump and thermostat
  housings
• Non-corrosive
• Very good gap fill
• Thixotropic nature means reduced migration of product
  after application
• Skin over time: 10 minutes
• Operating temperature: up to 200°C
• Approved by Toyota, Nissan, Honda, Mitsubishi and
  Hyundai
• NSF P1 registered (no. 122998)

5699 High Performance Silicone Gasket
Maker
  Stock No         Colour           Size          Price
  263700            Grey           300 ml          27.05
                                                     LOCTITE ADHESIVE/SEALANTS & PRIMERS                                                                                  179




          Loctite Terostat 9120 Elastic                     Loctite Terostat 9220 Power Adhesive                         Loctite Terostat 9320 Sprayable Seam
               Adhesive/Sealant                            Loctite 9220 is the powerful adhesive for flexible,
                                                                                                                                        Sealant
Loctite 9120 is an elastic, one-component, bodywork        permanent bonds. Features include                            Loctite 9320 is an elastic, sprayable, seam sealant based
sealant based on MS-polymer. Features include              • Provides a permanent bond with the strength of spot        on MS-polymer. Features include
• Good adhesion without primer to a wide range of metal      welding but without the scarring                           • Universal sealing compound and seam sealant
  and painted surfaces as well as many plastics            • Good adhesion without primer to a wide range of            • Good adhesion to metals, primers and top coats
• Used primarily as a vehicle bodywork sealant, but also     materials                                                  • High initial strength and fast through cure
  used in railway carriages and containers                 • High initial strength and fast cure through volume         • Can be instantly applied by brush or spray
• Excellent paint compatibility; can be used wet-on-wet    • Cures to a hard elastic                                    • High stability, can also be applied as a bead. Ideal both
  with 1C and 2C car repair paints, including those        • Excellent sealing performance                                as backer for filling wide seams and as a sealing
  containing alcohols and solvents                         • Use on metals (including aluminium and galvanised            compound
• No shrinkage and therefore no dimpling or tension          metal sheets), painted surfaces, glass, ceramics and       • Excellent paint compatibility; solvent and water-based
  stress (This property applies at the temperatures in       most plastics                                                paints have proven excellent adhesion to the sealant.
  repair ovens)                                            • Applications include vehicle body manufacture, vehicle     • Also compatible with alcohol-based paints
• Sealed seams can be spot-welded in wet condition           body build-up, buses, vans, trucks, caravans,              • Sealed seams can be subsequently spot-welded
• Ideal primary material for Terostat 9320 Sprayable         camper-vans, speciality vehicles and ship and boat         • Recommended for sealing automobile seams in the
  Seam Sealant                                               building                                                     repair shop, particularly engine compartment,
• Free of isocyanates, solvents and silicones              • Free of isocyanates, solvents and silicones                  passenger cabin and boot
• Odourless                                                • Odourless                                                  • Repaired seams have the same appearance as the
• Good UV resistance and can therefore be used for         • High resistance to ageing, weathering, UV light and salt     original
  interior and exterior applications                         water                                                      • Good sag and abrasion resistance
• Skin formation time: 10 minutes                          • Skin formation time: 15 minutes                            • Free of isocyanates, solvents and silicones
• Operating temperature range: -30°C to +100°C             • Operating temperature range: -40°C to +100°C               • Odourless
                                                                                                                        • High resistance to ageing and UV light
Terostat 9120 MS-Polymer Bodywork                          Terostat 9220 MS-Polymer Power Adhesive                      • Modest sound damping properties
Sealant                                                      Stock No         Colour           Size          Price      • Skin formation time: 15 minutes
                                                                                                                        • Operating temperature range: -40°C to +90°C
 Stock No          Colour          Size          Price       263706            Black          310 ml         16.15
 263705            White          310 ml         14.60                                                                  Terostat 9320 MS-Polymer Sprayable Seam
                                                                                                                        Sealant
                                                                                                                          Stock No          Colour           Size          Price
                                                                                                                          263707            Grey            310 ml         14.79
                                                                                                                          263708            Black           310 ml         14.79
                                                                                                                          263709            Beige           310 ml         14.79




                                                                                                                            Loctite 7239 Multi-Plastics Primer
                                                                                                                        Loctite 7239 is a general purpose primer for use with all
                                                                                                                        industrial plastics. Features include
                                                                                                                        • Use in conjunction with Loctite cyanoacrylate
                                                                                                                          adhesives (instant adhesives) for improved adhesion to
                                                                                                                          all plastics
                                                                                                                        • Especially recommended for difficult to bond materials
                                                                                                                          e.g. PE, PP, PTFE, TVP and thermoplastic rubbers. On
                                                                                                                          such treated surfaces the performance of Loctite
                                                                                                                          instant adhesives is similar to that described in the TDS
                                                                                                                          for that particular adhesive
                                                                                                                        • Dries rapidly at room temperature (Primer must dry
                                                                                                                          completely before adhesive is applied)
                                                                                                                        • Colourless
                                                                                                                          Stock No                   Size                  Price
                                                                                                                          263710                     4 ml                   4.11
180                          LOCTITE ACTIVATORS & ANTI-SEIZE COMPOUNDS




    Loctite 7458 Low Bloom Activator                             Loctite 7649 Anaerobic Activator                         Loctite Copper Anti-Seize Compound
Loctite 7458 is an activator for all Loctite instant        Loctite 7649 is a solvent-based activator designed to       Loctite Copper Anti-Seize is a copper-based anti-
adhesives. Features include                                 promote the curing speed of Loctite anaerobic adhesives     seize/assembly compound. Features include
• Accelerates the cure speed of all Loctite instant         and sealants. Features include                              • Provides a shield against high temperature seizing and
  adhesives                                                 • Especially recommended for applications with passive        galling
• Especially suited for post-application on cyanoacrylate     metals or inert surfaces                                  • Protects against rust and corrosion
  adhesive to ensure rapid fixturing                        • Also use for large gaps (>0.4mm) or when cure             • Studs, bolts, flanges and gaskets remove more easily
• Minimises post cure blooming while optimising bond          temperatures is below 15°C                                  and in cleaner and better condition
  strength                                                  • Contains non-CFC solvents                                 • Can be used on copper, brass, cast iron, steel, all
• Low odour and colourless                                  • Please note: this product is highly flammable               alloys including stainless steel, all plastics and all
• Suited to applications where aesthetics are critical,                                                                   non-metallic gasketing materials
                                                              Stock No                  Size                  Price
  such as cosmetic packaging, loudspeakers, enclosures                                                                  • Operating temperature range: -30°C to +980°C
  for electronic devices and jewellery                        263713                   150 ml                   6.24    • Approvals: MIL-PRF-907E
  Stock No                  Size                 Price
                                                                                                                        8007 Copper Anti-Seize Spray
  263711                   500 ml                 35.47
                                                                                                                         Stock No                  Size                  Price
                                                                                                                         263715               400 ml Aerosol             14.24

                                                                                                                        8008 Copper Anti-Seize Spray Brush Top Can
                                                                                                                         Stock No                  Size                  Price
                                                                                                                         263716                    454 g                  8.32

                                                                                                                        8008 Copper Anti-Seize Can
                                                                                                                         Stock No                  Size                  Price
                                                                                                                         263717                    3.6 kg                58.16

                                                                                                                        8065 Copper Anti-Seize Stick
                                                                                                                        Convenient, no-mess, semi-solid stick
                                                                                                                         Stock No                  Size                  Price
                                                                Loctite 7386 Multi-Bond Activator                        263718                    20 g                   5.42
                                                            Loctite 7386 is a solvent-based activator designed to
     Loctite 7240 Anaerobic Activator                       initiate the cure of Loctite toughened acrylic adhesives.
                                                            Features include
Loctite 7240 is a solvent-free activator designed to        • Especially recommended for fast curing of Multi-Bond
promote the curing speed of Loctite anaerobic adhesives       330 adhesive
and sealants, without significant loss of joint strength.   • Contains non-CFC solvents
Features include                                            • Please note: this product is highly flammable
• Especially recommended for applications with passive
                                                              Stock No                  Size                  Price
  surfaces such as stainless steel, aluminium and plated
  or passivated metals                                        263714                   500 ml                  48.55
• Also use for large bond gaps (>0.4mm) or when cure
  temperature is below 15°C
  Stock No                  Size                 Price
  263712                   910 ml                  7.63
                                                                         LOCTITE ANTI-SEIZE COMPOUNDS                                                                       181




 Loctite Aluminium Anti-Seize Compound                            Loctite 8023 Marine Grade Anti-Seize                      Loctite 8009 High Duty Anti-Seize Compound
• Protects against rust and corrosion
                                                                               Compound                                    Loctite 8009 is a heavy duty, metal-free, anti-seize/
• Studs, bolts and flanges remove more easily and in                                                                       assembly lubricant. Features include
                                                              Loctite 8023 is a high performance, metal-free, anti-
  cleaner and better condition                                                                                             • Graphite and calcium fluoride formulation, which is free
                                                              seize/assembly lubricant that protects assemblies
• Use on studs, bolts, pipe joints, industrial oven hinge                                                                    from lead, copper, sulphur and their compounds
                                                              exposed to direct or indirect fresh or salt water and high
  pins and other mated parts and pivots exposed to high                                                                    • Use for the long protection of all metals
                                                              humidity conditions. Contains graphite, calcium, boron
  temperatures                                                                                                             • Especially recommended for stainless steel, titanium
                                                              nitrite and rust inhibitors. Features include
• Can be used as a lubricant for oscillating mechanisms                                                                      and nickel alloys
                                                              • Protects against seizing and galling of metal parts,
• Operating temperature range: -30°C to +900°C                                                                             • Applications include bolts, screws, studs, pipe joints,
                                                                even under extreme conditions of temperature and
• Approvals: SECLF 216                                                                                                       nuts, bushings, extruding and forming dies, shear
                                                                humidity
                                                                                                                             blades and metal bending
                                                              • Effective even in corrosive atmospheres
8151 Aluminium Anti-Seize Spray                               • Suitable for use on stainless steel
                                                                                                                           • Used in chemical plants, oil refineries, power plants,
                                                                                                                             and ship and aerospace manufacturing and service
  Stock No                   Size                  Price      • Prevents galvanic corrosion
                                                                                                                           • Operating temperature range: -30°C to +1315°C
                                                              • Excellent lubricity
  263719               400 ml Aerosol               12.81
                                                              • Superior water spray resistance                              Stock No                 Size                   Price
                                                              • Ultimate water wash-out resistance
                                                                                                                             263725              454 g Brush Top             14.24
8150 Aluminium Anti-Seize Paste                               • Marine applications include bolts, screws, studs, pipe
                                                                                                                             263726                 3.6 kg Can              102.51
                                                                joints, nuts, shafts, bushings, splines, chains and
  Stock No                   Size                  Price
                                                                cables
  263720               500g Brush Top               17.08     • Other applications include pulp and paper mills, water
                                                                and waste water treatment plants, and dressings for
                                                                water pump gaskets and flanges
8060 Aluminium Anti-Seize Stick                               • Operating temperature range: -30°C to +1315°C
• Convenient, no-mess, semi-solid stick
                                                              • Specifications/Approvals
  Stock No                   Size                  Price        American Bureau of Shipping certified
                                                                MIL-PRF-907E
  263721                     20 g                    5.42
                                                                Stock No                  Size                   Price
                                                                263723              454 g Brush Top              39.86




                                                                                                                                        Loctite 8012 Moly Paste
                                                                                                                           Loctite 8012 is a heavy, black, assembly paste containing
                                                                                                                           molybdenum disulphide (65%) and rust inhibitors.
                                                                                                                           Features include
                                                                                                                           • High MoS2 concentration for the ultimate in low friction
                                                                                                                             solid lubrication
                                                                                                                           • Provides smoother than new metal surfaces. Machine
                                                                                                                             tool marks and other irregularities are reduced to a
   Loctite 8014 Food Grade Anti-Seize                                                                                        mirror-smooth finish by the lubricating action of Moly
                Compound                                                                                                     Paste
                                                                                                                           • Reduces friction on threaded fasteners; the low and
Loctite 8014 is a food grade, metal-free, anti-seize/
                                                                    Loctite 8013 High Purity Anti-Seize                      uniform friction coefficient of 0.06 creates reliable
assembly lubricant. It is a combination of white                                Compound                                     assembly conditions
lubricating solids and extreme pressure additives in a                                                                     • Lubricant stays in place through heat, load and
gelled white oil. Features include                            Loctite 8013 N-7000 is a high performance, metal-free,         vibration to ensure trouble-free disassembly
• Prevents seizing, galling, friction and wear on threaded    anti-seize/assembly lubricant, produced under 100%           • Good resistance to extremely high loads
  joints and other metal-to-metal surfaces                    controlled conditions for the highest purity. Features       • Ideal for protection of parts during running in or cold
• Lubricates, seals and protects against rust and             include                                                        start
  corrosion                                                   • Developed to protect steel, stainless steel and            • Use in metalworking (drawing, stamping, coining,
• Use on studs, bolts, pipe joints, flanges, press-fits and     proprietary alloys                                           extruding, forging) to eliminate scratching, galling and
  other metal-to-metal contact involving stainless steel      • Provides a significant improvement in anti-seize             metal pick-up. Also lengthens die life
  and other stainless alloys                                    performance. Prevents seizing, galling, stress             • Applications include press-fits, slip-fits, threaded
• Can be used in wet environments                               corrosion and destruction of threads and promotes            fasteners, splines and gears
• Used in industrial food plants, bakeries, breweries,          uniform and predictable clamp load                         • Operating temperature range: -30°C to +400°C
  hospitals and for general plant maintenance                 • Excellent chemical resistance                                Stock No                 Size                   Price
• Operating temperature range: -30°C to +400°C                • Used in nuclear power plants, chemical plants,
• Specifications/Approvals                                      pharmaceutical plants and other locations where              263727              454 g Brush Top             31.83
  FDA 21 CFR 178-3570                                           stainless steel fasteners and fittings are used.
   NSF H1 registered (no. 123004)                             • Operating temperature range: -30°C to +1315°C
                                                              • Specifications/Approvals
  Stock No                  Size                   Price        PMUC D50YP12
  263722                 907 g Can                  39.86       General Electric TIL 1117-3R1
                                                                Stock No                  Size                   Price
                                                                263724              454 g Brush Top              39.86
182                          LOCTITE CLEANERS & DEGREASERS




      Loctite 7063 Cleaner/Degreaser                        Loctite 7070 ODC-Free Cleaner/Degreaser                               Loctite 7200 Gasket Cleaner
Loctite 7063 is a solvent based formulation for cleaning    Loctite 7070 is a non-aqueous, hydrocarbon based             Loctite 7200 is designed to remove cured gasket sealants
and degreasing surfaces prior to adhesive bonding and       solvent, designed as an alternative for methyl chloroform,   and traditional gaskets from metal surfaces in 10 to 15
sealing applications. Features include                      for cleaning and degreasing surfaces prior to adhesive       minutes. Features include
• Compatible with metal, glass, rubber, most plastics and   bonding and sealing applications. Features include           • Easy application from aerosol can
  most painted surfaces                                     • Compatible with metal (including aluminium), glass,        • Forms a foam that will not run off, even on vertical
• Can also be used as a general purpose parts cleaner         rubber, most plastics and most painted surfaces              surfaces
  during maintenance operations                             • Can also be used as a general purpose parts cleaner        • Eliminates scraping and sanding, preventing damage to
• Multi-use by spraying, soaking, immersion, brushing or      during maintenance operations                                components
  wiping                                                    • Multi-use by spraying, soaking, immersion, brushing or     • Also aids removal of adhesives, dried oils, baked-on
• Ready-to-use product that dries to leave no residue         wiping                                                       grease, built-up carbon deposits, paint and varnish
• Will not cause flash rusting on water sensitive parts     • Ready-to-use product that dries to leave no residue          from any type of metal
• Contains no ozone depleting compounds                     • Will not cause flash rusting on water sensitive parts      • Does not contain CFCs
                                                            • Contains no ozone depleting compounds
  Stock No                 Size                   Price                                                                    Stock No                  Size                    Price
                                                              Stock No                 Size                   Price
  263728              400 ml Aerosol               8.71                                                                    263738               400 ml Aerosol                7.23
  263729            400 ml Pump Spray              8.71       263734              400 ml Aerosol               8.71
  263730                10 Litre Can              86.70       263735            400 ml Pump Spray              8.71
  263731              200 Litre Drum             962.36       263736                10 Litre Can              86.69




                                                                                                                               Loctite 7840 Cleaner/Degreaser
                                                                                                                         Loctite 7840 Natural Blue is a concentrated,
             Loctite 7031 Quick Clean                               Loctite 7039 Contact Cleaner                         biodegradable, cleaner/degreaser that contains no
                                                                                                                         hazardous solvents and dilutes with water to meet a wide
Loctite 7031 is a solvent based formulation for cleaning    Loctite 7039 is a solvent based contact cleaner spray.       range of industrial cleaning applications. Features
and conditioning surfaces prior to bonding with Loctite     Features include                                             include
cyanoacrylate adhesives. Features include                   • Formulated for cleaning electrical contacts without        • General purpose cleaner and degreaser that removes
• Use as a final cleaning treatment e.g. cleaning of          damaging insulating varnishes                                grease, oils, cutting fluids, tar, road salt, food stains,
  surfaces contaminated by release agents and parts         • Displaces moisture and leaves a water repellent film         animal fat and workshop grime
  soiled by handling                                        • Applications including cleaning contacts, relays,          • Applications include parts, engines, machinery,
• Neutralises surfaces which might inhibit the cure           switchgear, fuses and terminals                              vehicles, floors, walls, carpets, windows, concrete and
  speed of the adhesive                                     • Operational temperature range: -30°C to +50°C                asphalt
• Compatible with metal, glass, rubber, most plastics and                                                                • Biodegradable, non-toxic and non-flammable
                                                              Stock No                 Size                   Price      • Can be applied using pressure washers, floor
  most painted surfaces
• Generally improves cure and fixture speed, especially       263737              400 ml Aerosol              11.75        scrubbers and steam cleaners
  on plated parts                                                                                                        • Can be used concentrated or diluted up to 1:128 with
• Contains no ozone depleting compounds                                                                                    water, depending on the application
• Please note: this product is highly flammable                                                                          • Rated USFA-C1
  Stock No                 Size                   Price                                                                    Stock No                  Size                    Price
  263732              150 ml Aerosol               7.54                                                                    263739            750 ml Trigger Spray             5.63
  263733                  500 ml                  20.73                                                                    263740                 5 Litre Can                16.10
                                                                                                                           263741               20 Litre Drum                61.97
                                                                                                                           263742               200 Litre Drum              495.21
                                                                     LOCTITE CLEANERS & DISPENSERS                                                                             183




           Loctite 7850 Hand Cleaner                                Loctite 97001 Peristaltic Pump                              Loctite 97040 Manual Cartridge Gun
Loctite 7850 Fast Orange is a natural, biodegradable hand    Mounts easily on any Loctite 50 ml or 250 ml bottle to          Manual dispenser for product packaged in 300 ml
cleaner containing no petroleum solvents. Features           convert it into a portable dispenser. Features include          cartridges. Features include
include                                                      • Use for applications requiring single shots of product        • Use with all standard cartridges
• Cleans hands with d-Limonene, a solvent extracted          • Adjustable positive displacement, from 0.01 ml to             • Ergonomic shape for safe and easy handling
  from oranges                                                 0.40 ml of product                                            • Fibreglass reinforced plastic housing for long-lasting
• Contains no artificial fragrances and has a fresh citrus   • Allows user to control amount and positioning of the            reliability
  scent                                                        adhesive                                                      • Quick and easy cartridge change
• Contains aloe vera, lanolin and jojoba oil to moisturise   • Will not leak, regardless of the orientation of the bottle,
                                                                                                                               Stock No              Description                Price
  the skin and keep hands free from irritation, even with      minimising waste
  regular use                                                • Applicator nozzle accepts a variety of dispensing               263761               Cartridge Gun               43.86
• Balanced pH                                                  needles
• Contains fine pumice to gently remove ground-in dirt
                                                               Stock No               Description                 Price
• Works with or without water
• Removes grease, grime, oil, inks, soil, paint, gasket        263748            Peristaltic Hand Pump            74.64
  cements, epoxies and glues
  Stock No                   Size                    Price
  263743                 400 ml Bottle                4.83
  263744           3 Litre Pump Dispenser            16.93
  263745                 10 Litre Drum               44.71




                                                                                                                             Loctite 97002 Pneumatic Cartridge Gun
                                                                                                                             Pneumatic dispenser for product packaged in 250 ml
                                                                                                                             squeeze tubes and 300 ml cartridges. Features include
                                                                        Loctite Dispensing Needles                           • Use with all standard cartridges
                                                                                                                             • Ergonomic shape and light weight for safe and easy
                                                             For use with Loctite instant and anaerobic adhesives, will        handling
                                                             fit Loctite 10g, 20g and 50g bottles, the peristaltic pump      • Optimal power transmission
                                                             and dispense valves. Available in a range of types and          • Application is done without waste in quantities
                                                             sizes to allow optimised application of Loctite adhesives.        controlled by depressing the trigger
             Loctite 7855 Hand Cleaner                       Supplies and priced in packs of 50                              • Quick and easy cartridge change

                                                             Tapered Plastic (PPC) Needles                                     Stock No              Description                Price
Loctite 7855 is a heavy duty hand cleaner specially
formulated for the most difficult-to-remove stains.                                                                            263762               Cartridge Gun              168.42
                                                               Stock No            Size             Colour        Price
Features include
• Contains no harsh solvents or silicones                      263749           16 gauge            Grey          43.87
• Biodegradable, non-toxic and non-flammable                   263750           18 gauge            Green         43.87
• Pleasant floral scent                                        263751           20 gauge             Pink         43.87
• Contains four premium skin conditioners, aloe vera,          263752           22 gauge            Blue          43.87
  lanolin, jojoba oil and vitamin E, to allow for the most
  frequent use without affecting the skin
• Contains fine pumice to gently remove ground-in dirt
                                                             Stainless Steel Needles.           For precise applications
• Works with or without water                                  Stock No            Size             Colour        Price
• Superior cleaning ability makes this product best for
                                                               263753           15 gauge            Amber         26.04
  removing polyurethane, paint, resins, primers,
                                                               263754           18 gauge            Green         26.04
  adhesives, silicones, varnish and enamel
                                                               263755           20 gauge             Pink         26.04
  Stock No                   Size                    Price     263756           25 gauge             Red          26.04
  263746                  400 ml Bottle               8.38
  263747          1.75 Litre Pump Dispenser          31.49
                                                             Flexible Plastic (PPF) Needles
                                                               Stock No            Size             Colour        Price
                                                               263757           15 gauge            Amber         60.17
                                                               263758           18 gauge            Green         60.17
                                                               263759           20 gauge             Pink         60.17
                                                               263760           25 gauge             Red          60.17
184                           LOCTITE DISPENSERS, REPAIR KITS
                              & WEARING COMPOUNDS




     Loctite 96001 Dual Cartridge Gun                                     Loctite 37358 O-Ring Kit                                          Loctite Tak Pak Kit
Manual applicator for dispensing 50 ml dual cartridge        Enables the replacement of O-rings in situ, saving the          Instant adhesive kit for wire tacking and component
adhesives. Features include                                  need for complete disassembly. Features include                 mounting. Features include
• Twin pistons give an even reliable flow of material        • Joints are as strong as the rubber itself                     • Cures in seconds at room temperature
• Two components are fully mixed as they pass through        • Joints resist oil and water                                   • High temperature and thermal cycling resistant
  the nozzle                                                 • Eliminates the need for an inventory of different sized       • Supplied with dispensing needles for clean accurate
• Convenient, cost-effective method of applying product        O-rings                                                         applications
  with minimal waste                                         • Kit contains 7 standard diameter sizes of nitrile cord,       • Bonds a wide variety of materials
• Applicator is compatible with 1:1 and 2:1 ratio products     splicing jig, safety knife and Loctite 406 instant adhesive   • Ideal for general repairs as the kit cures through large
                                                                                                                               gaps in seconds without clamping
96001 Dual Cartridge Manual Applicator                       37358 O-Ring Kit                                                • Operating temperature range: -60°C to +120°C
                                                                                                                             • Kit contains: Loctite 382 20g instant adhesive
  Stock No                   Size                  Price       Stock No              Description                  Price
                                                                                                                                             Loctite 7455 25ml pump spray activator
  263763                    50 ml                  26.86       263767         O-Ring Kit c/w Carry Case           39.31                      2 dispensing needles
                                                                                                                               Stock No              Description                Price
Mixer Nozzles.        Square mixer nozzles for 50 ml dual
                                                             Replacement O-Ring Cord
cartridge adhesives                                                                                                            263775              Wire Tacking Kit              25.32
                                                               Stock No         Diameter            Length        Price
  Stock No                Pack Size                Price
                                                               263768            1.6 mm             8.5 m         10.55
  263764                      10                    8.91
                                                               263769            2.4 mm             8.5 m         11.29
                                                               263770            3.2 mm             8.5 m         16.32
                                                               263771            4.8 mm             8.5 m         16.32
                                                               263772            6.4 mm             8.5 m         23.54
                                                               263773            8.4 mm             8.5 m         27.79




                                                                                                                                  Loctite 7218 Wearing Compound
                                                                                                                             Loctite Nordbak 7218 is a ceramic filled, two-part epoxy,
     Loctite 96003 Dual Cartridge Gun                                                                                        designed to protect, rebuild and repair high wear areas.
                                                                                                                             Features include
Manual applicator for dispensing 200 ml dual cartridge                                                                       • Trowelable compound with outstanding resistance to
adhesives. Features include                                                                                                    abrasion and corrosion
• Twin pistons give an even reliable flow of material                                                                        • Suitable for overhead application and irregular
• Two components are fully mixed as they pass through                Loctite 5070 Pipe Reamer Kit                              surfaces
  the nozzle                                                                                                                 • Applications include chutes, pump housings, elbows,
                                                             Easy-to-use kit that repairs pipe leaks in one hour.              cyclones and material handling equipment
• Convenient, cost-effective method of applying product
                                                             Features include                                                • Working time 30 minutes, cure time 7 hours
  with minimal waste
                                                             • No tools required                                             • Operating temperature: up to 120°C
• Applicator is compatible with 1:1 and 2:1 ratio products
                                                             • Use for temporary and medium term repair of leaking
                                                               pipes and reinforcement of weak areas                         7218 Nordbak Wearing Compound
96003 Dual Cartridge Manual Applicator                       • Maximum operating temperature: 120°C
  Stock No                   Size                  Price     • Kit contains Loctite 3463 Magic Metal Steel stick,              Stock No                  Size                   Price
                                                               urethane-impregnated GRP tape and protective gloves             311600                    1 kg                   73.26
  263765                    200 ml                171.57
                                                               Stock No               Description                 Price        311601                    10 kg                 448.86
Mixer Nozzles.        Square mixer nozzles for 200 ml dual
                                                               263774               Pipe Repair Kit               39.31
cartridge adhesives
  Stock No                Pack Size                Price
  263766                      10                   10.46




                                     Trade Counter open 8.15 am - 5.30 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
                                                                          LOCTITE WEARING COMPOUNDS                                                                        185
                                                                                & BRUSHABLE CERAMICS




     Loctite 7230 Wearing Compound                                Loctite 7226 Wearing Compound                               Loctite 7227 Brushable Ceramic
Loctite Nordbak 7230 is a ceramic filled, two-part epoxy,    Loctite Nordbak 7226 is a two-component epoxy, filled      Loctite Nordbak 7227 is a two-component, ultra smooth,
designed to protect, rebuild and repair high wear areas.     with small ceramic beads for protecting processing         ceramic reinforced epoxy. Features include
Features include                                             equipment from fine particle wear. Features include        • Provides a long lasting high gloss, low friction coating
• Trowelable compound with outstanding resistance to         • Recommended for protecting equipment against               that protects against turbulence, abrasion and
  abrasion and corrosion                                       pneumatic abrasion                                         cavitation
• High temperature resistant                                 • Trowelable grey paste                                    • Brushable, thin film product
• Applications include chutes, pump housings, elbows,        • Rebuilds and repairs worn surfaces                       • Works as a top-coat over Nordbak Wearing
  cyclones and material handling equipment                   • Use for pump housings, chutes, elbows and cyclones         Compounds
• Working time 30 minutes, cure time 7 hours (Requires 2     • Working time 30 minutes, cure time 6 hours               • Applications include pump housings, impellors, tanks,
  hours post cure at 150°C for maximum temperature           • Operating temperature: up to +120°C                        chutes, butterfly valves, heat exchangers and
  resistance)                                                                                                             condensers
• Operating temperature: up to 230°C                         7226 Nordbak Pneu-Wear Wearing                             • Working time 30 minutes, cure time 6 hours
                                                             Compound                                                   • Operating temperature: up to 95°C
7230 Nordbak High Temperature Wearing
                                                               Stock No                 Size                  Price     7227 Nordbak Brushable Ceramic
Compound
                                                               311605                   1kg                   76.05       Stock No                  Size                   Price
  Stock No                  Size                  Price
                                                               311606                   10kg                 420.68
  311602                   10 kg                 765.86                                                                   311608                    1 kg                   127.27




                                                                  Loctite 7229 Wearing Compound
     Loctite 7219 Wearing Compound                                                                                            Loctite 7234 Brushable Ceramic
                                                             Loctite Nordbak 7229 is a two-component epoxy, filled
Loctite Nordbak 7219 is a rubber modified, ceramic filled,   with small ceramic beads for protecting processing         Loctite Nordbak 7234 is a two-component, ultra smooth,
two-part epoxy, designed to protect and restore surfaces     equipment from fine particle wear. Features include        ceramic reinforced epoxy. Features include
exposed both to wear and impact. Features include            • Recommended for protecting equipment against             • Provides a long lasting, high gloss, low friction coating
• Toughened epoxy that provides a combination of wear          pneumatic abrasion                                         that protects against turbulence, abrasion and
  resistance and impact resistance not found in standard     • Trowelable grey paste                                      cavitation
  epoxies                                                    • Rebuilds and repairs worn surfaces                       • High temperature resistant
• Trowelable grey paste                                      • High temperature resistant                               • Brushable, thin film product
• Use for lining and protecting flumes, troughs, elbows,     • Use for pump housings, chutes, elbows and cyclones       • Works as a top-coat over Nordbak Wearing
  hoppers and chutes                                         • Working time 30 minutes, cure time 6 hours (Requires 2     Compounds
• Working time 30 minutes, cure time 6 hours                   hours post cure at 150°C for maximum temperature         • Applications include pump housings, impellors, tanks,
• Operating temperature: up to 120°C                           resistance)                                                chutes, butterfly valves, heat exchangers and
                                                             • Operating temperature: up to 230°C                         condensers
7219 Nordbak High Impact Wearing                                                                                        • Working time 30 minutes, cure time 8 hours (Requires 3
Compound                                                     7229 Nordbak Pneu-Wear High Temperature                      hours post cure at 150°C for maximum temperature
                                                             Wearing Compound                                             resistance)
  Stock No                  Size                  Price                                                                 • Operating temperature: up to 205°C
                                                               Stock No                 Size                  Price
  311603                   1 kg                   76.58
  311604                   10 kg                 578.94        311607                  10 kg                 765.86
                                                                                                                        7234 Nordbak High Temperature Brushable
                                                                                                                        Ceramic
                                                                                                                          Stock No                  Size                   Price
                                                                                                                          311609                    1 kg                   155.21




                                   Phone Lines open 7.30 am - 6.00 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
186                           LOCTITE PLASTIC PADDING PRODUCTS




      Plastic Padding Glass Fibre Kit                             Plastic Padding Glass Fibre Mat                        Plastic Padding Chemical Metal Repair Paste
Loctite 3028 is the complete glass fibre repair kit.         Loctite product. For use with Glass Fibre Resin. Features   Loctite product. Two-component, polyester based,
Features include                                             include                                                     multipurpose repair paste. Features include
• Repairs holes, splits and cracks in steel, aluminium,      • Repairs and reinforces rust and perforation damage        • Repairs, fills, joins and seals metals, stone, wood,
  glass fibre and wood                                       • Suitable for automotive, marine and agricultural            hardboard, asbestos, glass and most rigid plastics
• Hundreds of applications, including cars, boats,             applications                                              • Cures quickly into a hard durable material
  caravans and general repairs in industry and around                                                                    • Does not shrink
                                                               Stock No                  Size                    Price
  the home                                                                                                               • Can be machined, drilled, tapped and polished after 20
• Recommended for joining different materials such as          311615               190 x 970 mm                  1.85     minutes
  wooden bulkheads to GRP hulls                                311616                    1 m²                     4.31   • Resistant to water, oil, petrol and weak chemicals
• Resistant to salt water, petrol, oil, solvents and weak                                                                • Operating temperature: up to +100°C (Short term heat
  chemicals                                                                                                                resistance to +160°C)
• Kit includes resin, hardener, glass fibre mat, spatula,
                                                                                                                           Stock No               Description                 Price
  mixing cup and brush
                                                                                                                           311620                  55 ml Tube                  2.61
  Stock No              Description                Price
                                                                                                                           311621                  560 ml Tin                  8.36
  311610                 Junior Kit                  4.11
  311611                 Senior Kit                  6.03




                                                                   Plastic Padding Extra Hardener
                                                             Loctite product. For use with all Plastic Padding
                                                             bodyfillers. Features include
                                                             • Activator for Glass Fibre Resin
                                                               Stock No              Description                 Price
                                                                                                                             Plastic Padding Elastic Body Filler
                                                               311617              Standard Tube                  1.32
    Plastic Padding Glass Fibre Resin                          311618                40 g Tube                    1.83   Loctite product. Two-component filler with superior
                                                               311619              60 g Cartridge                 6.83   adhesion to mild steel. Features include
Loctite product. Top quality, A-grade, tack-free resin for                                                               • Applications include steel, aluminium, glass fibre, ABS
use with Glass Fibre Mat. Features include                                                                                 and galvanised and zinc coated steel
• Repairs holes, splits and cracks in steel, aluminium,                                                                  • Cures quickly into a flexible material that will not crack,
  glass fibre and wood                                                                                                     flake or fall out, even with severe shock
• Suitable for automotive, marine and agricultural                                                                       • Designed primarily as a car body filler, it is easy to cut
  applications                                                                                                             back and sand
• Recommended for joining different materials such as                                                                    • Sands to a superfine finish which can be painted with
  wooden bulkheads to GRP hulls                                                                                            any paint system
• Resistant to salt water, petrol, oil, solvents and weak                                                                • Can be used for filling blow holes in castings and
  chemicals                                                                                                                mouldings
• Cures in 30 minutes when activated with Plastic                                                                        • Resistant to water, oil, petrol and most weak chemicals
  Padding Extra Hardener
                                                                                                                           Stock No               Description                 Price
  Stock No                  Size                   Price
                                                                                                                           311622                  80 g Tube                   2.29
  311612                   250 ml                    2.90                                                                  311623                  420 g Tin                   3.58
  311613                   500 ml                    5.15                                                                  311624                  830 g Tin                   5.10
  311614                   1 Litre                   8.38




                           Large volume user and require a quotation? Call Grahame our Sales Director on 01224 615030
                                                               LOCTITE PLASTIC PADDING PRODUCTS                                                                                  187




        Plastic Padding Ultima Filler                                 Plastic Padding Gelcoat Filler                                Plastic Padding Marine Epoxy
Loctite product. Universal polyester resin based filler.       Loctite product. Two-component white gelcoat filler.          Loctite 3026 is a two-component epoxy, specially
Features include                                               Features include                                              formulated for wet environments and marine
• Use for all repair jobs on all surfaces, including mild      • Use for surface repairs to glass fibre, e.g. Restores       applications. Features include
  steel, galvanised and zinc coated steel, aluminium,            original finish to boat hulls                               • Makes a strong and durable repair to fibreglass, wood,
  glass fibre and polycarbonate                                • Easy to mix, apply, shape and sand                            steel, stainless steel, cast iron and aluminium
• Easy to apply with excellent build quality                   • Cures in 15 minutes                                         • Effectively seals osmosis blisters
• Fast setting                                                 • Can be pigmented or painted with any marine paint           • Ideal for repairs to ferrocement and fibre-reinforced
• Sands easily to a fine finish                                • Use with Glass Fibre Mat for structural repairs to GRP        hulls
• Suitable for infrared and low bake drying systems                                                                          • Sets in 60 minutes, fully cured in 4 hours
                                                                 Stock No              Description                Price
• The only filler you'll ever need in the paintshop or                                                                       • Easy to sand to a tough durable finish
  bodyshop                                                       311627                130 ml Tube                  5.34     • Can be over-painted with marine paints
• Resistant to water, oil, petrol and most weak chemicals                                                                    • Use a thin layer of Plastic Padding Gelcoat for a
                                                                                                                               smooth finish
  Stock No               Description                Price
                                                                                                                             • Resistant to water, oil and petrol
  311625                   996 g Tin                  9.30
                                                                                                                               Stock No               Description                Price
  311626                3 kg Cartridge               30.31
                                                                                                                               311630                 150 ml Tube                  7.65




                                                                      Plastic Padding Marine Filler
                                                               Loctite 3025 is a two-component polyester filler, specially
                                                               formulated for wet environments and marine
                                                               applications. Features include
    Plastic Padding Glass Fibre Paste                          • Fills and seals large holes and cracks in fibreglass,
                                                                 wood, steel and aluminium                                              Plastic Padding Leak Fix
Loctite 3022 is a two-component, glass fibre reinforced,       • Sets in 10 minutes, can be machined, drilled, tapped
polyester paste. Features include                                and sanded after 20 minutes                                 Loctite product. Two-component repair paste. Features
• Repairs holes and gaps up to 50 mm in steel,                 • Can be over-painted with all marine finishes                include
  aluminium, glass fibre and wood                              • For use below the waterline, Marine Filler should be        • Seals and repairs leaks in petrol tanks, radiators,
• Contains high tensile glass strands to provide a high          coated with a primer and top coat                             cylinder heads, sumps and pipes
  strength bond for structural repairs                         • Resistant to water, oil and petrol                          • Use on steel, cast iron, lead, tin, aluminium, copper,
• Tack free finish allows easy removal of excess product                                                                       asbestos and glass fibre
• Sets in 10 minutes, can be sanded after 20 minutes             Stock No              Description                Price
                                                                                                                             • Sets in minutes
• Finish with a thin layer of any Plastic Padding body           311628                130 ml Tube                  7.35     • Resistant to salt water, oil, petrol, diesel, anti-freeze
  filler for the perfect repair                                  311629                 560 ml Tin                  9.83       and most common chemicals
• Extremely water resistant; can be used as a marine                                                                         • Operating temperature range: -40°C to +100°C (Short
  filler                                                                                                                       term heat resistance to +160°C)
• Resistant to salt water, oil, petrol, organic solvents and
  weak chemicals                                                                                                               Stock No               Description                Price

  Stock No               Description                Price                                                                      311631                 55 ml Tube                   2.59

  312359                  750 g Tin                   9.64




                        All prices and descriptions correct at time of publication and are subject to change without notice
188                          LOCTITE PLASTIC PADDING PRODUCTS/
                             THISTLEBOND PRODUCTS/DEVCON PUTTY




    Plastic Padding Aluminium Mesh                                     Thistlebond A&B Cement                                       Devcon Plastic Steel Putty
Loctite product. Non-rust reinforcement for repairing       Thistlebond A&B Cement is a two-component, high              Plastic Steel Putty is the original, metal filled, two-
and bridging rust holes and perforations in metals and      performance, epoxy adhesive, specifically developed for      component, epoxy putty that cures at room temperature
glass fibre. Features include                               repairs where difficult adhesion conditions exist.           and is designed for filling, rebuilding and bonding metal
• Use with any Plastic Padding body filler                  Features include                                             surfaces. Features include
• Easy to bend into shape                                   • Can be applied to virtually any surface to form an         • Replaces welding and brazing for economical and
                                                              effective bond                                               dependable repairs
  Stock No                  Size                  Price
                                                            • Can be used to fill cracks in components and castings      • Bonds to most metals, concrete and some plastics
  311632               254 x 203 mm                0.70       prior to application of Thistlebond Resin Repair           • Applies easily to vertical surfaces
                                                              Systems                                                    • Cures to a tough, durable, metallic material that can be
                                                            • Usable life: 20 minutes                                      drilled, tapped, machined or painted. Machinable to a
                                                            • After curing for a minimum of 2 hours, the product can       metallic finish
                                                              be sanded, ground and machined                             • Used for hundreds of routine maintenance, production
                                                                                                                           and tooling applications
                                                              Stock No                 Weight                 Price
                                                                                                                         • Excellent resistance to oil, petrol, water and many
                                                              260020                   176 g                   6.67        chemicals
                                                                                                                         • Pot life 45 minutes, cure time 16 hours
                                                                                                                         • Operating temperature: up to 121°C
                                                                                                                           Stock No                   Size                    Price
                                                                                                                           311633                     500 g                    22.57
                                                                                                                           311634                      1 kg                    43.61




     Thistlebond Resin and Hardener
Thistlebond Standard Resin and Hardener is a two-
component, high performance, solvent free, epoxy
system. Features include
• Used in conjunction with glass tape for on-site repairs
  to metal, wood, glass and synthetic materials
• Resin and Hardener mix and glass fabric are built up in          Thistlewrap Pipe Repair Tape
  alternate layers to form a glass fibre resin laminate.
  This laminate is an excellent repair medium with good     Thistlewrap is a high performance, rapid curing, repair
  adhesion and inherent strength and integrity              bandage, specifically developed for sealing leaking pipes.
• Usable life 30 minutes, touch dry 2 hours                 Features include
• Operating temperature: up to 170°C                        • Instant repairs to high and low pressure pipes
                                                            • Simple to use                                                 Devcon Plastic Steel 5 Minute Putty
Resin and Hardener                                          • Moisture activated, soak and squeeze in water for 10-
                                                              20 seconds                                                 Plastic Steel 5 Minute Putty is a fast curing, steel filled,
  Stock No                 Weight                 Price                                                                  two-component, epoxy putty for emergency repairs and
                                                            • Fast cure; the bandage hardens in 10 minutes and is
  260010                   225 g                   9.80       fully cured in 1 hour                                      fast maintenance. Features include
                                                            • High strength; a repair built up to a thickness of 12 mm   • Ready for service in 1 hour
                                                              will withstand a service pressure of 10 bar (150 psi)      • Bonds to most metals and concrete
Glass Tape                                                                                                               • Cures to a tough durable steel filled material that can
                                                              Stock No        Length            Width         Price        be drilled, tapped, machined or sanded
  Stock No        Length            Width         Price
                                                              260072           3.6 m            50 mm         25.00      • Mixes, applies and cures at temperatures as low as
  260040           50 m             50 mm         18.00                                                                    4°C
                                                                                                                         • Pot life 5 minutes, cure time 1 hour
                                                                                                                         • Operating temperature: up to 93°C
                                                                                                                           Stock No                   Size                    Price
                                                                                                                           311635                     500 g                    31.53




                                                                         Looking for an item not listed? Call our Sales Team on 01224 620944
                                                                                                                   DEVCON PUTTY                                        189




       Devcon Stainless Steel Putty                                      Devcon Bronze Putty                                  Devcon Wear Resistant Putty
Stainless Steel Putty is a stainless steel filled, two-    Bronze Putty is a bronze filled, two-component, epoxy       Wear Resistant Putty is a ceramic filled, two-component,
component, epoxy putty for repairing and rebuilding        putty for repairing and rebuilding bronze and brass parts   epoxy putty for repairs requiring smooth, low friction
stainless steel machinery and castings. Features include   and equipment. Features include                             finishes. Features include
• Bonds to ferrous and non-ferrous metals (and             • Repairs and rebuilds areas where brazing is               • Bonds to steel, iron, aluminium, ceramic, concrete,
  concrete)                                                  undesirable or impossible                                    brass and some plastics
• Machinable to a metallic finish                          • Bonds to bronze, brass, copper and ferrous metals         • Ideal for repairing and rebuilding interfacing metal
• Non-rusting and resistant to most chemicals              • Can be machined, drilled or tapped using conventional        surfaces
• Applications include food processing equipment, dairy      metalworking tools. Machinable to a metallic finish       • Contains fillers to provide a high-slip finish
  equipment and stainless steel holding tanks              • Non-rusting and resistant to most chemicals               • Abrasion resistant
• Pot life 45 minutes, cure time 16 hours                  • Applications include shafts, bushings, castings, marine   • Protects metal from bi-metallic corrosion
• Operating temperature: up to 121°C                         propellers and equipment parts                            • Non-rusting and resistant to cutting oils and most
• FDA approved for use in food processing applications     • Pot life 35 minutes, cure time 16 hours                      chemicals
• NSF registered for potable water applications            • Operating temperature: up to 121°C                        • Applications include flange faces, machine ways,
                                                                                                                          valves, shafts and tracing guides
  Stock No                 Size                  Price       Stock No                  Size                   Price
                                                                                                                       • Pot life 45 minutes, cure time 16 hours
  311636                  500 g                  38.26       311638                    500 g                  38.26    • Operating temperature: up to 121°C
                                                                                                                         Stock No                 Size                  Price
                                                                                                                         311641                  500 g                  32.61




           Devcon Aluminium Putty                                       Devcon Titanium Putty
Aluminium Putty is an aluminium filled, two-component      Titanium Putty is a high technology, titanium reinforced,
epoxy putty for effective, cost-efficient repairs to       two-component, epoxy putty engineered for making                Devcon Wet Surface Repair Putty
aluminium castings, parts and equipment. Features          critical repairs to machinery and precision parts.
include                                                    Features include                                            Wet Surface Repair Putty is a two-component epoxy
• Bonds to aluminium and many other metals (and            • Repairs can be precision machined to a smooth             specially formulated for wet environments and
  concrete)                                                   non-rusting finish                                       underwater applications. Features include
• Can be machined, drilled or tapped using conventional    • High compressive strength                                 • Bonds to metals, concrete, wood and some plastics
  metalworking tools                                       • Excellent resistance to most chemicals                    • Penetrates moisture and eliminates the need to dry
• Non-rusting and resistant to most chemicals              • Abrasion resistant                                          substrates thoroughly before repairs
• Applications include filling voids and pores in          • Applications include bearing housings, shafts, wear       • Non-rusting
  aluminium castings and repairs to air conditioning          rings, hydraulic rams, valves and impellers              • Mixes, applies and cures at temperatures as low as
  components                                               • Pot life 21 minutes, cure time 16 hours                     4°C
• Pot life 60 minutes, cure time 16 hours                  • Excellent temperature resistance: up to 177°C             • Pot life 45 minutes, cure time 16 hours
• Operating temperature: up to 121°C                       • Mil Spec DOD-C-24176(SH) Type I & II                      • Operating temperature: up to 93°C
  Stock No                 Size                  Price       Stock No                  Size                   Price      Stock No                 Size                  Price
  311637                  500 g                  34.25       311639                    500 g                  40.06      311642                  500 g                  38.15
                                                             311640                    1 kg                   71.30




                                                                      Prices shown are indicative prices. For current prices call 01224 620944
                                                                                         or email: sales@gibbtools.co.uk
190                         DEVCON EPOXY & LIQUIDS




    Devcon Brushable Ceramic Epoxy                                    Devcon Aluminium Liquid                                       Devcon Flexane Liquid
Brushable Ceramic is a high performance, ceramic filled,   Aluminium Liquid is an aluminium filled, two-component,     Flexane Liquid is a castable, non-shrinking urethane
two-component epoxy for sealing, protecting and            castable liquid epoxy. Features include                     compound. Features include
repairing surfaces subject to erosion, corrosion and       • Reproduces delicate or intricate parts. Use for making    • Two-component product that mixes and pours easily
wear. Features include                                       moulds, patterns or holding fixtures                        Bonds to metal, rubber, concrete, wood and fibreglass
• Repairs metals, concrete and some plastics               • Mixes and pours easily                                    • Applications include making rugged flexible moulds,
• Applies easily with a short bristle brush or roller      • Low viscosity, self-levelling liquid                        non-scratching holding fixtures, abrasion and noise
• Low viscosity, self-levelling liquid                     • Hardens in about 1 hour                                     resistant linings, discontinued rubber parts, forming
• Smooth, low friction surface reduces turbulence and      • Low shrinkage                                               dies and also for encapsulating and protecting parts
  protects against wear, cavitation, abrasion, corrosion   • Good thermal conductivity                                 • Protects against vibration, shock, expansion,
  and erosion                                              • Can be drilled, tapped and machined. Machinable to a        contraction and wear
• Outstanding resistance to chemicals                        metallic finish                                           • Operating temperature: up to 82°C
• Can be machined, drilled and painted                     • Resistant to most chemicals                               • Available in three formulations
• Applications include pump casings, flange faces,         • Pot life 75 minutes, cure time 16 hours
  impeller blades, fan blades and heat exchangers          • Operating temperature: up to 121°C                        Flexane 60 Liquid
• Pot life 21 minutes, cure time 16 hours                                                                              • Shore A hardness 60, high flexibility
                                                             Stock No                 Size                  Price
• Excellent temperature resistance: up to 177°C                                                                        • Pot life 35 minutes, cure time 16 hours
                                                             311646                  500 g                  34.26
  Stock No                 Size                  Price                                                                   Stock No                  Size                Price
  311643                  500 g                  44.49                                                                   311648                   500 g                 36.08
                                                                                                                         311649                    5 kg                329.92

                                                                                                                       Flexane 80 Liquid
                                                                                                                       • Shore A hardness 87, medium flexibility
                                                                                                                       • Pot life 30 minutes, cure time 16 hours
                                                                                                                         Stock No                  Size                Price
                                                                                                                         311650                    500 g                36.08
                                                                                                                         311651                    5 kg                329.92

                                                                                                                       Flexane 94 Liquid
                                                                                                                       • Shore A hardness 97, relatively rigid
                                                                                                                       • Pot life 10 minutes, cure time 16 hours
                                                                                                                         Stock No                  Size                Price
                                                                                                                         311652                    500 g                36.08
                                                                                                                         311653                    5 kg                329.92

                                                                 Devcon Wear Resistant Liquid
        Devcon Plastic Steel Liquid                        Wear Resistant Liquid is a ceramic filled, two-component,
                                                           castable, liquid epoxy for use where exceptional
Plastic Steel Liquid is a steel filled, two-component,     durability and ruggedness is required. Features include
castable, liquid epoxy. Features include                   • No shrink curing assures accurate reproduction of
• Reproduces fine detail when making holding fixtures,       critical details. Use for making metal forming dies and
  light gauge forming dies and moulds                        tracing masters
• Low viscosity, self-levelling liquid                     • Low viscosity, self-levelling liquid
• Hardens in about 1 hour                                  • Hardens in less than 1 hour
• Low shrinkage                                            • Combines low friction performance with outstanding
• High compressive strength                                  wear resistance
• Can be precision machined to an excellent metallic       • Resistant to most chemicals
  finish                                                   • Pot life 45 minutes, cure time 16 hours
• Ideal levelling compound for machinery and equipment     • Operating temperature: up to 121°C
• Resistant to most chemicals
                                                             Stock No                 Size                  Price
• Pot life 45 minutes, cure time 16 hours
• Operating temperature: up to 121°C                         311647                  500 g                  30.75
• Mil Spec MMM-A-1754
  Stock No                 Size                  Price
  311644                  500 g                  23.42
  311645                  1 kg                   44.49
                                                                             DEVCON FLEXANE PRODUCTS                                                                      191




           Devcon Flexane Brushable                                  Devcon Flexane Primers                                    Devcon Flex-Add Flexibilizer
Flexane Brushable is a high performance, brushable,       Liquid primer used to promote the ultimate adhesion of all   Flex-Add Flexibilizer is a softening agent used with
urethane compound that cures to form a tough, medium      Flexane urethane products. Features include                  Flexane 80 Liquid to produce a custom-made urethane.
hard, rubber-like coating. Features include               • Use FL-10 primer to maximise adhesion to metals            Features include
• Two-component product that mixes easily                 • Use FL-20 primer to maximise adhesion to rubber,           • Creates a lower durometer castable urethane
• Use with Flexane primers for maximum adhesion to          wood, fibreglass, concrete and Flexane                     • Use to match Shore A hardness of existing rubber
  metal, rubber, concrete, wood and fibreglass            • For metal immersed in water, apply a first coat of FL-10   • Allows moulds to be more flexible for easier
• Coats up to 50 ml in one pass                             primer and a second coat of FL-20 primer                     demoulding
• Protects equipment surfaces against impact, wear,
                                                                                                                         Stock No                  Size                   Price
  abrasion and corrosion. Use for coating hoppers,        Flexane FL-10 Primer
  chutes, pump impellers, feeder bowls and fans                                                                          311659                   237 ml                   13.67
                                                            Stock No                 Size                   Price
• Excellent flexibility, tear and tensile strength
• Aids noise reduction                                      311656                   112 g                  13.69
• Medium hard, shore A hardness 86
• Pot life 45 minutes, cure time 24 hours
• Operating temperature: up to 82°C
                                                          Flexane FL-20 Primer
                                                            Stock No                  Size                  Price
  Stock No                 Size                 Price
                                                            311657                   112 g                  13.69
  311654                  500 g                  49.44




                                                                                                                                    Devcon Release Agent
                                                                                                                       Liquid silicone release agent that prevents Devcon epoxy
                                                                                                                       and urethane compounds sticking to patterns or mould
                                                                                                                       surfaces. Features include
                                                                                                                       • Prevents sticking after multiple use
                                                                                                                       • Produces a high gloss finish
                                                                                                                       • Facilitates the accurate duplication of intricate details
             Devcon Flexane Putty                                 Devcon Flexane Accelerator
                                                                                                                         Stock No                  Size                   Price
                                                          Liquid additive that shortens the cure time of all Devcon
Flexane Putty is a trowelable, urethane compound that                                                                    311660                   470 ml                   30.95
                                                          Flexanes. Features include
cures to form a tough, medium hard rubber. Features       • Reduces cure time by up to 50%
include                                                   • Maintains cure schedule when using Flex-Add
• Two-component product that mixes easily                   Flexibilizer or Flexane Primer
• Trowels easily and smoothly                             • Helps Flexane products cure in temperatures as low as
• Bonds to metal, rubber, concrete, wood and fibreglass     0°C
  (Use Flexane primers for maximum adhesion)
• Used to line, repair and protect process equipment        Stock No                 Size                   Price
  subject to impact, abrasion, vibration, expansion and     311658                   336 g                  13.31
  contraction
• Excellent tear resistance
• Aids noise reduction
• Medium hard, shore A hardness 87
• Pot life 45 minutes, cure time 24 hours
• Operating temperature: up to 82°C in dry environments
  up to 49°C in wet environments
  Stock No                 Size                 Price
  311655                  500 g                  36.08




    Looking for an item not listed?
  Call our Sales Team on 01224 620944
192                          DEVCON CLEANERS & ADHESIVES




             Devcon Cleaner Blend                                         Devcon 2 Ton Epoxy                                Devcon Devweld 531 Adhesive
Cleaner Blend 300 is a safe, multi-purpose                  2 Ton Epoxy is an extremely strong, two-component,        Devweld 531 is a two-component, methacrylate adhesive,
cleaner/degreaser for cleaning surfaces prior to using      medium-cure adhesive/encapsulant. Features include        specially formulated for difficult-to-bond engineered
Devcon products. Features include                           • Bonds rigid durable substrates such as metals, glass,   plastics. Features include
• Removes dirt, oil, tar, grease and dust                     ceramics, concrete and wood in all combinations         • Superior bond strength
• Use on steel, alloy, rubber, plastic, wood and concrete   • Use for potting electronic components and assemblies    • Bonds to nylon based alloys, epoxy composites,
  surfaces and porous castings                              • Low viscosity, self-levelling liquid                      modified polyesters and other difficult-to-bond plastics
• Evaporates fast                                           • Fills poorly mated joining surfaces while providing     • Non sag and gap filling
• Needs no rinsing, leaves no residue                         excellent adhesion                                      • Excellent durability and impact resistance
• Ideal for dip tanks                                       • Cures without shrinking                                 • Excellent environmental and chemical resistance
                                                            • Forms a clear, rigid, powerful bond                     • Working time: 15-18 minutes
  Stock No                  Size                  Price
                                                            • Good impact resistance                                  • Operating temperature: up to 120°C
  311661                   1 Litre                 18.50    • Water resistant formula
                                                                                                                        Stock No                 Size                   Price
                                                            • Good resistance to oil, petrol and solvents
                                                                                                                        311674                  50 ml                   10.71
                                                              Stock No                Size                  Price
                                                                                                                        311675                  200 ml                  18.12
                                                              311668             50 ml Cartridge              8.73      311676                  400 ml                  35.24
                                                              311669             200 ml Cartridge            14.51
                                                              311670             400 ml Cartridge            27.63




             Devcon 5 Minute Epoxy
5 Minute Epoxy is a two-component, rapid curing,
general purpose adhesive/encapsulant. Features include
• Bonds rigid durable substrates such as metals, glass,                                                                            Devcon Plastic Welder
  ceramics, concrete and wood in all combinations
• Low viscosity, self-levelling liquid                            Devcon Devweld 530 Adhesive                         Plastic Welder is a two-component, rapid curing,
• 100% reactive, no solvents                                                                                          methacrylate adhesive designed for structural bonding of
• Dries in 15 minutes with full strength in 1 hour          Devweld 530 is a two-component, rapid curing, multi-      engineered plastics. Features include
• Forms a clear, rigid bond                                 purpose, methacrylate adhesive. Features include          • Toughened, structural adhesive that produces high
• Good resistance to oil, petrol and solvents               • Toughened, structural adhesive that produces high         strength, load bearing bonds
                                                              strength, load bearing bonds                            • Minimal surface preparation
  Stock No                  Size                  Price     • Minimal surface preparation                             • Bonds to standard engineered plastics, metals,
  311662                  28 g Tube                 5.21    • Bonds to most metals, ceramics, engineered plastics,      ceramics and wood. Bonds dissimilar substrates
  311663                  70 g Tube                 9.43      wood and other materials. Bonds dissimilar substrates   • Non sag and gap filling
  311664                  500 g Tin                35.67    • Non sag and gap filling                                 • Superior peel and impact resistance
  311665               50 ml Cartridge              8.72    • Excellent shear and peel strength and impact            • Resistant to weathering, humidity and wide variations
  311666              200 ml Cartridge             14.51      resistance                                                in temperature
  311667              400 ml Cartridge             27.63    • Resistant to weathering, humidity and wide variations   • Resistant to oils and solvents
                                                              in temperature                                          • Functional cure in 1 hour
                                                            • Working time: 4-6 minutes                               • Operating temperature: up to 120°C
                                                            • Operating temperature: up to 120°C
                                                                                                                        Stock No                 Size                   Price
                                                              Stock No                 Size                 Price
                                                                                                                        311677                    28 g                   7.19
                                                              311671                   50 ml                 10.40
                                                              311672                  200 ml                 17.59
                                                              311673                  400 ml                 34.22
                                                     DEVCON PATCHES, PUTTY & APPLICATORS/
                                                                                                                                                                             193
                                                                       ARALDITE ADHESIVES




                Devcon Zip Patch                                            Devcon Magic Bond                                     Araldite Precision Adhesive
Zip Patch is a high technology, adhesive impregnated,         Magic Bond is a two-component, fast curing, epoxy putty.    Araldite Precision is a super strong, long lasting, two-
patch system for making permanent, waterproof, field          Features include                                            component, epoxy adhesive. Features include
repairs. Features include                                     • Mixes quickly and easily                                  • Bonds metals, wood, masonry, glass, ceramics,
• Easy-to-use, fast setting system                            • Two-colour formulation ensures uniform mix                  rubber and most hard plastics
• Minimal surface preparation                                 • Seals leaks and repairs cracks and gouges in steel,       • Slow setting and repositionable for 2 hours
• Strong adhesion to all common substrates                      aluminium, wood, fibreglass, concrete and ceramics        • Fills poorly mated joining surfaces
• Use to repair pipes, tanks and containers                   • Bonds to wet surfaces and cures well underwater           • Can be sanded and painted
• Non sagging formula                                         • Use for repairs to machinery and equipment, plumbing      • Good resistance to water, oil and chemicals
• Low odour                                                     repairs and repairs to pipes, tanks and drums. Suitable   • Setting time 6 hours, cure time 16 hours
• Hardens to a tough, durable, waterproof finish in             for marine use                                            • Operating temperature: up to 65°C
  minutes                                                     • Can be sanded and painted. Also machined, drilled or
                                                                                                                            Stock No                  Size                    Price
• Functional cure in 1 hour                                     tapped using conventional metalworking tools
• Operating temperature: up to 95°C                           • Working life 10 minutes, cures rock-hard in 1 hour          261030                 30 ml Tube                  3.26
                                                              • Operating temperature: up to 120°C in dry environments      261040                24 ml Syringe                4.06
  Stock No                  Size                   Price
                                                                up to 52°C in wet environments
  311678               102 x 229 mm                32.14
                                                                Stock No                 Size                  Price
                                                                311680                  114 g                   7.13




                                                                                                                                     Araldite Rapid Adhesive
               Devcon Floor Patch                                                                                         Araldite Rapid is a super strong, long lasting, two-
                                                                                                                          component, epoxy adhesive. Features include
Floor Patch is an all-purpose, floor patching compound                Devcon Manual Applicators                           • Bonds metals, wood, masonry, glass, ceramics, rubber
with high compression strength. Features include                                                                            and most hard plastics
• Easy to mix and apply                                       Hand-held, manual, applicator guns for dispensing and       • Fast setting, ideal for quick repairs
• Strong adhesion to concrete, brick, masonry, metal and      applying Devcon epoxies, methacrylates and urethanes.       • Fills poorly mated joining surfaces
  wood                                                        Features include                                            • Can be sanded and painted
• Use to repair floors and walls. Can be used to anchor       • Easy-to-load, easy-to-use applicator gun                  • Good resistance to water, oil and chemicals
  bolts in concrete                                           • Convenient and efficient method of dispensing Devcon      • Setting time 10 minutes, cure time 1 hour
• Can be used for internal or external applications             two-component products                                    • Operating temperature: up to 65°C
• Compression strength of 8000 psi, three times the           • Mixer nozzle automatically and thoroughly mixes
                                                                                                                            Stock No                  Size                    Price
  typical strength of concrete                                  components before application
• Excellent resistance to water, oils, solvents and alkalis                                                                 261010                 30 ml Tube                  4.03
• Ready to walk on after 8 hours                              Manual Applicators (1:1 Ratio)                                261020                24 ml Syringe                4.78
• Operating temperature: up to 120°C in dry environments      • For epoxy and methacrylate adhesives
  up to 49°C in wet environments
                                                                Stock No                 Size                  Price
  Stock No                  Size                   Price
                                                                311681                  50 ml                  18.01
  311679                    5 kg                   62.26        311682                  200 ml                 64.79
                                                                311683                  400 ml                107.97

                                                              Mixer Nozzles (1:1 Ratio)
                                                                Stock No                 Size                  Price
                                                                311684                  50 ml                    0.57
                                                                311685                200/400 ml                 0.74
194                           ARALDITE ADHESIVES




      Araldite Instant Clear Adhesive                              Araldite 2011 Structural Adhesive                         Araldite 2013 Structural Adhesive
Araldite Instant Clear is a super strong, long lasting, two-   Araldite 2011 is a high strength, two-component, multi-   Araldite 2013 is a high strength, two-component, metal
component, epoxy adhesive. Features include                    purpose, epoxy paste adhesive. Features include           coloured, epoxy paste adhesive. Features include
• Bonds metals, wood, masonry, glass, ceramics, rubber         • Bonds metals, ceramics, glass, rubber, rigid plastics   • Designed as a metal bonding adhesive, but also
  and most hard plastics                                         and most other materials in common use                    suitable for ceramics, glass, rubber, rigid plastics and
• Very fast setting, ideal for quick repairs                   • Versatile adhesive for the craftsman as well as most      most other materials in common use
• Sets clear, use for glass or when a cosmetic joint is          industrial applications                                 • Non sagging up to 5 mm thickness; suitable for vertical
  required                                                     • Long working life                                         applications
• Fills poorly mated joining surfaces                          • Low shrinkage                                           • Thixotropic with good gap filling properties
• Can be sanded and painted                                    • Good resistance to dynamic loading                      • Low shrinkage
• Good resistance to water, oil and chemicals                  • Can be sanded and painted                               • Metallic appearance
• Setting time 90 seconds, handling strength 5 minutes         • Good resistance to water, oil and chemicals             • Good resistance to water, good environmental
• Operating temperature: up to 65°C                            • Pot life 100 minutes, setting time 7 hours                resistance
                                                               • Operating temperature: up to 65°C                       • Excellent resistance to chemicals
  Stock No                   Size                   Price
                                                                                                                         • Pot life 50-80 minutes, setting time 4 hours
                                                                 Stock No                 Size                   Price
  311686                24 ml Syringe                 5.37                                                               • Operating temperature: up to 65°C
                                                                 311688              50 ml Cartridge              9.68
                                                                                                                           Stock No                  Size                   Price
                                                                 311689             200 ml Cartridge             24.16
                                                                 311690             2 x 100 ml Tubes             23.46     311696               50 ml Cartridge             11.31
                                                                 311691                 2 kg Pack                68.63     311697              200 ml Cartridge             33.26
                                                                                                                           311698                  2 kg Pack                71.08




    Araldite 2010 Structural Adhesive
Araldite 2010 is a toughened, high strength, two-
component, multipurpose, epoxy paste adhesive.
Features include                                                   Araldite 2012 Structural Adhesive
• Bonds metals, ceramics, glass, rubber, rigid plastics                                                                      Araldite 2014 Structural Adhesive
  and most other materials in common use                       Araldite 2012 is a high strength, two-component, multi-
• Particularly suitable for applications requiring a tough     purpose, epoxy paste adhesive. Features include           Araldite 2014 is a high strength, two-component, epoxy
  and resilient bond                                           • Bonds metals, ceramics, glass, rubber, rigid plastics   paste adhesive with excellent chemical and heat
• Fast cure                                                      and most other materials in common use                  resistance. Features include
• Low shrinkage                                                • Versatile adhesive for the craftsman as well as most    • Bonds metals, electronic components, GRP structures
• High peel and shear strength                                   industrial applications                                   and many other items that operate in aggressive
• Can be sanded and painted                                    • Very fast cure                                            environments
• Good resistance to water, oil and chemicals                  • Low shrinkage                                           • Non sagging up to 5 mm thickness, suitable for vertical
• Pot life 10 minutes, setting time 30 minutes                 • Tough and resilient                                       applications
• Operating temperature: up to 65°C                            • Can be sanded and painted                               • Thixotropic with good gap filling properties
                                                               • Good resistance to water, oil and chemicals             • Standard cure
  Stock No                   Size                   Price      • Pot life 5-8 minutes, setting time 20 minutes           • Low shrinkage
  311687              200 ml Cartridge               27.40     • Operating temperature: up to 65°C                       • Low outgassing makes this product suitable for
                                                                                                                           specialist electronic, telecommunication and
                                                                 Stock No                  Size                  Price
                                                                                                                           aerospace applications
                                                                 311692               50 ml Cartridge             9.56   • Excellent resistance to heat
                                                                 311693              200 ml Cartridge            23.91   • Excellent resistance to water and chemicals
                                                                 311694              2 x 100 ml Tubes            25.94   • Pot life 60 minutes, setting time 3 hours
                                                                 311695                  2 kg Pack               68.14   • Operating temperature: up to 120°C
                                                                                                                           Stock No                  Size                   Price
                                                                                                                           311699               50 ml Cartridge             10.94
                                                                                                                           311700              200 ml Cartridge             27.40
                                                                                                                           311701                  2 kg Pack                88.22




                                    Trade Counter open 8.15 am - 5.30 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
                                                           ARALDITE ADHESIVES & APPLICATORS/
                                                                                                                                                                         195
                                                                   CENTRON SOLVENT CLEANER




    Araldite 2015 Structural Adhesive                           Araldite 2021 Structural Adhesive                             Araldite Manual Applicators
Araldite 2015 is a toughened, two-component, epoxy          Araldite 2021 is a toughened, two-component, general      Hand-held, manual, applicator guns for dispensing and
paste adhesive giving a resilient bond. Features include    purpose, methacrylate adhesive for rapid assembly         applying Araldite epoxy, methacrylate and polyurethane
• Ideal for bonding GRP, SMC and dissimilar substrates.     operations on a wide range of substrates. Features        adhesives. Features include
• Also bonds metals                                         include                                                   • Easy-to-load, easy-to-use applicator gun
• Non sagging up to 10 mm thickness, suitable for           • Bonds metals, ceramics, ABS, PVC, PMMA,                 • Convenient and efficient method of dispensing Araldite
  vertical applications                                       polycarbonates, polyamides and other plastics and         two-component adhesives
• Thixotropic with good gap filling properties                composites                                              • Standard applicator gun is a professional quality gun
• Low shrinkage                                             • Versatile adhesive with an excellent bond to a wide       for regular use
• High peel and shear strength                                range of materials                                      • Basic applicator gun is a low cost gun for occasional
• Good resistance to water and chemicals                    • Good gap filling properties                               use
• Pot life 30-40 minutes, setting time 4 hours              • Very fast cure                                          • Static mixer nozzle automatically and thoroughly mixes
• Operating temperature: up to 65°C                         • High peel and shear strength                              components before application
                                                            • Excellent resistance to heat
  Stock No                  Size                  Price
                                                            • Good resistance to water and chemicals                  Manual Applicators
  311702              50 ml Cartridge              10.98    • Pot life 2-3 minutes, setting time 8 minutes
                                                                                                                        Stock No               Description                Price
  311703              200 ml Cartridge             27.47    • Operating temperature: up to 100°C
  311704                 2 kg Pack                 68.99                                                                311710               50 ml Basic Gun              11.38
                                                              Stock No                 Size                  Price
                                                                                                                        311711             50 ml Standard Gun             43.57
                                                              311706             50 ml Cartridge             12.42      311712              200 ml Basic Gun              53.44
                                                              311707             400 ml Cartridge            49.79      311713            200 ml Standard Gun            149.68
                                                                                                                        311714            400 ml Standard Gun            165.44

                                                                                                                      Static Mixer Nozzles
                                                                                                                        Stock No                  Size                    Price
                                                                                                                        311715                   50 ml                     1.46
                                                                                                                        311716                 200/400 ml                  1.68




    Araldite 2020 Structural Adhesive
Araldite 2020 is a low viscosity, two-component, clear,
epoxy adhesive. Features include                                Araldite 2022 Structural Adhesive
• Bonds glass, ceramics, ferrous metals, aluminium,
  ABS, PVC, acrylics, polycarbonates, polyamides,           Araldite 2022 is a toughened, two-component,
  polystyrene foam and polyurethane foam                    methacrylate adhesive for rapid assembly operations on
• Long working time                                         a wide range of substrates, including difficult-to-bond
• Room temperature curing                                   materials
• Low shrinkage                                             • Bonds a wide range of metals, plastics and composites
• Refractive index similar to glass                         • Ideal for bonding thermoplastics                                   Centron Solvent Cleaner
• Good resistance to water and chemicals                    • Tolerant to non-optimal pretreatment
• Pot life 90 minutes, setting time 16 hours                • Gap filling up to 4 mm                                  Aerosol Solutions product formulated for use in the
• Operating temperature: up to 65°C                         • Fast cure                                               electrical, electronic and engineering industries.
                                                            • Good sanding properties                                 Features include
  Stock No                  Size                  Price                                                               • Ideal for cleaning motors, contacts, circuit boards,
                                                            • Good resistance to water and most chemicals
  311705                0.5 kg Pack                28.18    • Excellent resistance to petrol and oils                   electronic components and sensitive equipment
                                                            • Pot life 10 minutes, setting time 18 minutes            • Effective light duty degreaser; will remove oil, grease,
                                                                                                                        waxes and silicones
                                                              Stock No                 Size                  Price    • Can also be used for spot cleaning garments in the
                                                              311708              50 ml Cartridge            12.54      textile trades
                                                              311709             400 ml Cartridge            50.27    • Evaporates quickly leaving no residue
                                                                                                                        Stock No               Description                Price
                                                                                                                        262534               500 ml Aerosol                4.56




                                                              Phone Lines open 7.30 am - 6.00 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
196                          CLEANING SOLVENT/GASKET COMPOUNDS




  Lectron Electronic Cleaning Solvent                                       Hylomar Aerograde                                  Hermetite Red Gasket Compound
Aerosol Solutions product. Specialist solvent cleaner        Aerograde PL32 is a highly engineered non-setting gasket     Hermetite Red is the original semi-hardening gasket
with slower evaporation. Features include                    and sealing compound for use in the aeronautical             jointing compound, developed initially for use on cylinder
• Formulated for the efficient cleaning of delicate          industry. It was developed in conjunction with Rolls         heads. Features include
  electronic components, tape heads, compact discs,          Royce Aerospace Division for sealing joints in jet turbine   • Suitable for use on aluminium and alloy cylinder heads
  video equipment, contacts, etc                             engines. Features include                                    • Effectively seals flanged or screw threaded joints
• Quickly flushes away grease, oil and soiling               • Non-setting and non-hardening even at high                 • Semi-hardening; easy and quick disassembly for
• Safe on most plastics                                        temperatures                                                 service and repair
• Low toxicity                                               • Unlimited assembly time                                    • Excellent gap filling properties; ideal for pitted or
• Evaporates to leave a clean dry surface                    • Equally suitable for dressing gaskets and metal to metal     roughly machined surfaces
• Extension tube to aid access to difficult-to-reach areas     applications                                               • Help prevent corrosion between two different metals
                                                             • Vibration resistant                                        • Resistant to fuels, oil, steam, water and anti-freeze
  Stock No              Description               Price
                                                             • Resistant to combustion products, water, brine, engine     • Temperature range: -40°C to 250°C
  262532              400 ml Aerosol                3.34       coolant, petroleum, lubricating oils, kerosene and
                                                                                                                            Stock No              Description               Price
                                                               fluorocarbon refrigerants
                                                             • Seals surface imperfections                                  262116                 50 g Tube                  2.73
                                                             • Withstands rapid variations in temperatures                  311721          125 ml Applicator Bottle          3.92
                                                             • Flame, dust and moisture proofing properties                 311722                 600 g Tin                 11.09
                                                             • Temperature range: -50°C to 250°C
                                                             • Specifications/Approvals
                                                               Rolls Royce MSRR 9055
                                                               Ministry of Defence DTD 900/4586B
                                                               National Power/Powergen 15/53/181
                                                               Meets BASEEFA requirements for flame proof joints
                                                               Stock No              Description                Price
                                                               311719                 100 g Tube                 6.26




             Hylomar Universal Blue
Universal Blue is the leading non-setting gasket and
sealing compound in use world wide. The product is
used by many major automotive manufacturers and by                                                                          Hermetite Golden Gasket Compound
several Formula 1 teams. Features include
• Non-setting and non-hardening even at high                                                                              Hermetite Golden is a non-hardening gasket jointing
  temperatures                                                                                                            compound. Features include
• Unlimited assembly time                                                                                                 • Use for dressing gaskets on all kinds of joints
• Enables the effective sealing of metal to metal and                                                                     • Use for sealing metal-to-metal joints
  plastic to plastic components                                                                                           • Non-hardening; easy and quick disassembly for service
• Vibration resistant                                                                                                       and repair
• Resistant to combustion products, water, brine, engine                                                                  • Unlimited assembly time; allows precise alignment of
  coolant, petroleum, lubricating oils, kerosene and                    Hermetite Instant Gasket                            joints
  fluorocarbon refrigerants                                                                                               • Unaffected by vibration
• Seals surface imperfections                                Creates silicone rubber formed-in-place gaskets              • Resistant to fuels, oil, grease, steam, water and
• Suitable for dressing conventional gaskets                 instantly. Features include                                    anti-freeze
• Withstands rapid variations in temperatures                • Replaces traditional, fragile, pre-formed gaskets          • Temperature range: -40°C to 250°C
• Flame, dust and moisture proofing properties               • Forms a tough flexible rubber seal
                                                                                                                            Stock No              Description               Price
• Temperature range: -50°C to 250°C                          • Excellent gap filling properties; ideal for pitted or
                                                               roughly machined surfaces                                    311723                 45 g Tube                  2.13
  Stock No              Description               Price
                                                             • Suitable for vertical and overhead applications due to
  311717                100 g Tube                  4.06       it's non-running qualities
  311718              350 g Cartridge              11.18     • Unaffected by vibration
                                                             • Withstands extremes of pressure and temperature
                                                             • Resists oil, transmission fluids, water and anti-freeze
                                                             • Temperature range: -60°C to 260°C
                                                               Stock No              Description                Price
                                                               311720                 38 g Tube                  3.55
                                                               262115                 85 g Tube                  4.82




                       All prices and descriptions correct at time of publication and are subject to change without notice
                                         GASKET COMPOUNDS/JOINTING COMPOUNDS/                                                                                            197
                                                                      PTFE TAPE




   Hermetite Green Gasket Compound                                Boss Green Jointing Compound                                     Stag B Jointing Compound
Hermetite Green is a heavy duty, hard setting, jointing     Boss Green is an easily applied pipe jointing compound.     Red, thick consistency, jointing paste. Features include
compound. Features include                                  Features include                                            • Good gap filling properties; use on uneven or damaged
• Forms a perfect seal on all kinds of mechanical joints    • Acts as a lubricant and sealant                             surfaces
• Low viscosity, quick drying and hard setting              • Contains PTFE for extra lubrication                       • Use on screw threaded joints from ½ - 1½" BSP
• Use for applications requiring a permanent joint          • For use with potable hot and cold water supplies          • Use hemp reinforcement on threaded joints larger than
• Resists extremes of heat and pressure                     • Operational pressure: up to 7 bar                           1½" BSP
• Resists fuels, oil, steam, water, dilute acids and        • Operational temperature: up to 200°C                      • Resistant to gas, steam, water, petrol, oil and mineral
  anti-freeze                                               • Listed UK WBS product                                       acids
• Temperature range: -40°C to 300°C (Short Periods
                                                              Stock No                  Size                    Price     Stock No                 Size                   Price
  330°C)
                                                              311727                    400 g                    4.17     311730                   500 g                  15.63
  Stock No              Description               Price
  311724                 40 g Tube                  2.06
  311725          125 ml Applicator Bottle          3.92
  311726                 500 g Tin                 12.10




                                                                            PTFE Sealing Tape                                Swagelok Swak Thread Sealant
                                                            Pipe thread sealing tape. Features include                  SWAK is an anaerobic pipe thread sealant. Features
                                                            • Secures a watertight seal on threaded joints              include
      Boss White Jointing Compound                          • Conforms to EN751                                         • Provides a leak-proof seal on pipe threads
                                                            • WRC approved                                              • Contains PTFE for extra lubrication
Boss White is an easily applied pipe jointing compound.                                                                 • Prevents galling and seizing of threads
                                                              Stock No          Width           Length          Price
Features include                                                                                                        • Vibration resistant
• Acts as a lubricant and sealant                             266250            12 mm            12 m            0.20   • Does not shrink
• Non-toxic                                                                                                             • Compatible with a wide range of chemicals
• For use with hot and cold water (non-potable supplies),                                                               • Low breakaway torque
  natural gas and low pressure steam                                                                                    • Temperature range: -53°C to 176°C
• Operational pressure: up to 7 bar
                                                                                                                          Stock No                 Size                   Price
• Operational temperature: up to 200°C
• Conforms to BS6956 Part 5: 1992                                                                                         311731                   50 ml                  10.70
  Stock No                  Size                  Price
  266274                   400 g                    2.31




                                                                       Stag A Jointing Compound
                                                            Red, thin consistency, jointing paste. Features include
                                                            • Use on small joints which are new and undamaged
                                                            • Use on screw threaded joints from ½ - 1½" BSP
                                                            • Resistant to gas, steam, water, petrol, oil and mineral
                                                              acids
                                                            • Reduces battery terminal corrosion
                                                              Stock No                  Size                    Price
                                                              311729                    400 g                   12.60
198                           LEAK DETECTORS/CUTTING COMPOUNDS/
                              DOW CORNING PRODUCTS




      Swagelok Snoop Leak Detector                                     Trefolex Cutting Compound                                    Dow Corning 4
Snoop liquid leak detector has been formulated for quick    Trefolex is an advanced formula, hand applied, cutting
                                                                                                                            Electrical Insulating Compound
and easy on-site detection of gas and air leaks. Features   paste. Features include                                   DC4 is a silicone-based paste that insulates, waterproofs
include                                                     • Use with hand tools such as hacksaws and taps for       and lubricates. Features include
• Non-flammable and odourless                                 working on metals and plastics                          • High insulating properties; ideal for aircraft, automotive
• Non-toxic and non-corrosive                               • Particularly suitable for threading conduit               and marine ignition systems and spark plug
• Safe on plastics and all metals                           • Reduces friction and eases cutting operation              connections
• Safe on compressed air and most industrial gases          • Extends tool life                                       • Highly water repellent; use to waterproof electrical
• Highlights all leaks even under low pressure. Bubbles     • Ensures a smooth clean cut                                connections, assemblies and terminals
  will appear at the precise location of the leak           • Non-flammable and non-toxic                             • Use as an assembly lubricant for various metal-on-
                                                            • Harmless to the environment                               plastic and metal-on-rubber combinations
  Stock No                  Size                   Price
                                                                                                                      • Adheres readily to dry metals, ceramics, rubber,
                                                              Stock No             Description               Price
  311732                   236 ml                    4.40                                                               plastics and insulating resins
                                                              262260                 500 ml Tin                9.54   • Odourless, non-toxic and non-melting
                                                              262265                2.5 Litre Tin             33.81   • Resistant to a wide range of chemicals
                                                                                                                      • Remains effective for long periods
                                                                                                                      • Temperature range: -55°C to 200°C
                                                                                                                      • Meets MIL-S-8660C
                                                                                                                      • FDA approved 21 CFR 175.300
                                                                                                                        Stock No               Description                Price
                                                                                                                        311734                 100 g Tube                   6.00




              Lubysil Cutting Fluid
Lubysil BC014 is a super concentrated, aerosol applied,                  Dow Corning Molykote
cutting fluid. Features include                                           Anti-Friction Coating
• Use for drilling, milling, tapping, machining, pressing
  and other metal working operations                        Molykote D-321R is an air-curing, dry film lubricant.
• High filming properties                                   Features include
• Reduces friction and extends tool life                    • For metal-on-metal combinations with slow to medium
• Gives closer tolerances and improves surface finish         fast movements and high loads
• Allows increased removal rates                            • Excellent adhesion, even on smooth surfaces                 Dow Corning 7 Release Compound
• Fast and convenient application, especially where         • Extremely low coefficient of friction
  accessibility is a problem                                • Protects against stick-slip                             Dow Corning 7 is a silicone-based lubricant and mould
• Particularly suitable for use during machinery            • Can be used to improve the running-in process           release agent. Features include
  operations                                                • Doesn't attract dust and other contaminants             • Mould release agent for plastic and rubber parts
                                                            • High ageing resistance                                  • Release agent for plastic extruders and processing
  Stock No              Description                Price
                                                            • Use for lubrication under high vacuum and at extreme      equipment and plastic film packaging machines
  262250               340 g Aerosol                 6.20     temperatures                                            • Inhibits adhesive build up on knives and blades
                                                            • Temperature range: -180°C to 450°C                      • Rubber lubricant and preservative, use as a lubricant
                                                              Stock No              Description               Price     for drawing rubber-covered cable through conduit
                                                                                                                      • Airframe lubricant
                                                              311733              400 ml Aerosol              12.40   • Moisture resistant
                                                                                                                      • Odourless, non-toxic and non-melting
                                                                                                                      • Resistant to a wide range of chemicals
                                                                                                                      • Shows little tendency to dry out in service
                                                                                                                      • Temperature range: -40°C to 200°C
                                                                                                                      • FDA approved 21 CFR 175.300
                                                                                                                        Stock No               Description                Price
                                                                                                                        311735                 100 g Tube                   5.47




                                          For ease and accuracy when placing orders please use our stock number
                                                          DOW CORNING & MOLYKOTE PRODUCTS/                                                                                   199
                                                                               G. P. SILICONE




             Dow Corning 111 Valve                              Molykote G-N Plus Solid Lubricant Paste                                 Molykote BR2 Plus
             Lubricant and Sealant                                                                                                   High Performance Grease
                                                              Molykote G-N Plus is a speciality solid lubricant for the
Molykote 111 is a heavy-consistency, silicone-based           assembly of metal components and the running-in of new      Molykote BR2 Plus is a high performance grease for
lubricant and sealant. Features include                       equipment. Features include                                 metal/metal combinations involving slow to fast
• Sealant for vacuum and pressure systems                     • Aids assembly and disassembly of threaded and close       movements, particularly with medium to high loads.
• Anti-stick and sealant for closures on outdoor                tolerance components                                      Features include
  equipment, including shipboard applications and other       • Running-in lubricant for new and reconditioned            • Soap thickened grease with solid lubricants and EP
  harsh environments                                            machines and gearboxes                                      additives
• Anti-stick and sealant for gaskets and rubber and           • Permanent lubricant for machine elements that move        • Used successfully on roller bearings, plain bearings,
  plastic o-rings                                               only occasionally or slightly                               sliding guides, roller guides, ball-and-socket joints,
• Lubricant for control and pressure plug valves, water       • Low coefficient of friction                                 splined shafts and threaded spindles
  softener valves and tap valves                              • Protects against stick-slip                               • High load carrying capacity
• Valve stem lubricant for potable water                      • Prevents seizing, fretting and scuffing                   • Low oxidation, suitable for long-term lubrication
• Damping medium for dash pots in electrical and              • Good corrosion protection                                 • Good water washout resistance
  electronic equipment                                        • High load carrying capacity                               • Good corrosion protection
• Chemical barrier coating                                    • High surface covering capacity (40m²/kg)                  • Protects against scarring and fretting
• Resistant to weathering and water washout                   • Temperature range: -25°C to 450°C                         • NGLI No 2
• Odourless, non-toxic and non-melting                                                                                    • Temperature range: -30°C to 130°C (150°C for short
                                                                Stock No             Description               Price
• Resistant to a wide range of chemicals                                                                                    periods)
• Shows little tendency to dry out in service                   311738                 500 g Tin                21.07
                                                                                                                            Stock No              Description                Price
• Temperature range: -40°C to 200°C                             311739                 1 kg Tin                 38.00
• FDA approved 21 CFR 175.300                                                                                               311740                     1 kg Tin                9.93
  Stock No             Description              Price
  311736                100 g Tube                8.67




                                                                            Molykote Separator
                                                                                                                             Everbuild General Purpose Silicone
                                                              Molykote Separator is a silicone anti-stick lubricant and
                                                              release agent, safe for use where incidental food contact   General purpose, high modulus, silicone sealant.
  Molykote 1000 Solid Lubricant Paste                         may occur. Features include                                 Features include
                                                              • Odourless, colourless and tasteless                       • Adheres to most smooth and non-porous materials,
Molykote 1000 is a high performance solid lubricant,          • Excellent slip and anti-stick properties                    including glass, ceramics, timber, metals and laminates
formulated to lubricate and protect threaded metal            • Improves surface quality, reduces wear and allows         • Fast curing
components. Features include                                    easier cleaning                                           • Forms a permanently flexible, waterproof, rubber seal
• Enables non-destructive disassembly of all threaded         • Use on conveyor belts, guides, slide plates and tables    • Suitable for interior and exterior use
  parts, even after long operational periods in harsh         • Lubricates rubber and plastic parts                       • Contains an anti-fungal compound to prevent mould
  environments                                                • Release agent used in rubber and plastics processing,       growth
• Coefficient of friction of treated fasteners remains          cardboard box manufacturing and wood processing           • Life expectancy 25 years
  uniform and steady, even after several tightening and       • Meets USDA H1 guidelines for use in the food industry     • Conforms to BS 5889 (B)
  loosening processes                                         • Temperature range: -40°C to 200°C
                                                                                                                            Stock No           Size               Colour     Price
• Applications include cylinder head bolts, nozzle head
                                                                Stock No             Description               Price
  screws on plastic injection moulding machines, bolted                                                                     262810            310 ml              Clear        1.67
  joints in the chemical industry and tension rings in          262155              400 ml Aerosol               5.13       262820            310 ml              White        1.67
  centrifuges
• Good corrosion protection
• High load carrying capacity
• Temperature range: -30°C to 650°C
  Stock No             Description              Price
  311737                 1 kg Tin                23.33




                                                          All prices are in pounds sterling and exclude VAT
200                          EVERBUILD SILICONES & SEALANTS




Everbuild 225 Industrial and Glazing Silicone                      Everbuild 450 Builders Silicone                                 Everbuild 600 PVCu Silicone
Industrial and Glazing Silicone is a high modulus, acetoxy   Builders Silicone is a premium quality, low modulus,          PVCu Silicone is a premium quality, low modulus, reactive
cure, silicone sealant. Features include                     non-corrosive, neutral cure, silicone sealant. Features       cure, silicone sealant, specially formulated to provide
• Adheres to most smooth and non-porous materials,           include                                                       excellent adhesion to PVCu and plastics. Features
  including glass, ceramics, timber, metals and laminates    • Adheres to virtually all building substrates, both porous   include
• Applications include single glazing, draught-proofing        and non-porous, including brick, stone, concrete,           • Adheres to most common building materials, including
  and general industrial use                                   timber, metals and PVCu                                     • PVCu, plastics, brick, stone and metals
• Fast curing                                                • Compatible for use with polycarbonate and acrylic           • Fast curing
• Forms a permanently flexible, waterproof, rubber seal.       sheets.                                                     • Forms a permanently flexible, waterproof, rubber seal.
  Flexibility factor 25%                                     • Compatible for use with lead                                  Flexibility factor 50%
                                                                                                                           • Suitable for interior and exterior use
• Suitable for interior and exterior use                     • Safe for use next to insulated glass units
                                                                                                                           • Life expectancy 35 years
• Contains an anti-fungal compound to prevent mould          • Applications include construction expansion joints and
                                                                                                                           • Conforms to BS 5889 (A) and ISO 11600, G25LM
  growth                                                       perimeter pointing of all types of door and window
• High temperature resistance (to 200ºC)                       frames                                                        Stock No           Size           Colour        Price
• Life expectancy 25 years                                   • Forms a permanently flexible, waterproof, rubber seal.        311749            310 ml          White           3.40
• Conforms to BS 5889 (B) and ISO 11600                        Flexibility factor 50%
  Stock No           Size           Colour        Price      • Suitable for interior and exterior use
                                                             • Life expectancy 35 years
  311984            310 ml          White           2.63     • Conforms to BS 5889 (A) and ISO 11600, F&G25LM
  311985            310 ml       Translucent        2.63
  311986            310 ml      Brushed Steel       2.63       Stock No           Size            Colour        Price
                                                               311744            310 ml           White           3.00
                                                               311745            310 ml        Translucent        3.00
                                                               311746            310 ml           Brown           3.00




                                                                                                                                        Everbuild 700T Silicone
                                                                                                                           Silicone 700T is a premium quality, low modulus, neutral
                                                                                                                           cure, silicone sealant, specially formulated for the PVCu
                                                                                                                           and roofline industry. Features include
                                                                                                                           • Adheres to PVCu, brick, stone, concrete, timber and
   Everbuild 335 Construction Silicone                                                                                       metals
                                                                                                                           • Compatible for use with polycarbonate and acrylic
Construction Silicone is a low modulus, reactive cure,
                                                                                                                             sheets
silicone sealant, specially formulated as a cost-effective    Everbuild 500 Bath and Sanitary Silicone                     • Applications include perimeter pointing door and
PVCu sealant. Features include                                                                                               window frames, sealing plastic roofline areas and
• Adheres to many common building substrates, including      Bath and Sanitary Silicone is a premium quality, high           general weathersealing
   PVCu, brick, metals, plastics and glass                   modulus, acetoxy cure, silicone sealant. Features             • Forms a permanently flexible, waterproof, rubber seal.
• Fast curing                                                include                                                         Flexibility factor 50%
• Forms a permanently flexible, waterproof, rubber seal.     • Adheres to ceramics, acrylic, laminates, metals and         • Suitable for interior and exterior use
   Flexibility factor 35%                                      glass                                                       • Life expectancy 25 years
• Suitable for interior and exterior use                     • Typically used in areas of high humidity, such as           • Conforms to BS 5889 (A), except Clause 9
• Contains an anti-fungal compound to prevent mould            bathrooms, toilets, showers and kitchens in both
                                                               commercial and domestic applications                          Stock No           Size          Colour         Price
   growth
• Life expectancy 30 years                                   • Fast curing                                                   311750            310 ml         White            3.62
• Conforms to BS 5889 (A) and ISO 11600, G25LM               • Forms a permanently flexible, waterproof, rubber seal.        311751            310 ml      Translucent         3.62
                                                               Flexibility factor 25%
  Stock No           Size           Colour        Price      • Suitable for interior and exterior use
  311741            310 ml          White           2.85     • Contains a high level of powerful anti-fungal compound
  311742            310 ml       Translucent        2.85       to prevent mould and fungal growth
  311743            310 ml          Brown           2.85     • Life expectancy 30 years
                                                             • Conforms to BS 5889 (B) and ISO 11600
                                                               Stock No           Size          Colour          Price
                                                               262825           310 ml           White            2.95
                                                               311748           310 ml           Ivory            2.95
                                                                 EVERBUILD SILICONES & SEALANTS                                                                                201




    Everbuild Forever White Silicone                               Everbuild 125 One Hour Caulk                                         Everbuild AC50 Acoustic
Forever White is a superior silicone sealant with 10 year   One Hour Caulk is a fast drying, flexible, decorators filler
                                                                                                                                         Sealant and Adhesive
protection against mould and discolouration. Features       and sealant. Features include                                  Acoustic Sealant and Adhesive is a high strength,
include                                                     • For sealing and filling cracks and gaps before               permanently flexible sealant and adhesive. Features
• Contains Microban which is one of the most                  decorating                                                   include
  recognised and trusted anti-bacterial brands in the       • Can be overpainted as soon as skin has formed,               • Formulated for sealing and bonding plasterboard and
  world. Microban is evenly distributed throughout the        normally after one hour                                        kraft lined insulation board
  silicone structure to actively prevent black mould,       • No sanding down required                                     • Adheres to plaster, brick, stone, concrete and timber
  mildew and bacteria, keeping your silicone forever        • Can be overpainted with most paint types or covered          • Provides a high strength, long lasting, permanently
  white                                                       with wallpaper                                                 flexible seal
• Use in bathrooms, wetrooms, kitchens, utility rooms       • Solvent free, water based product. Any excess sealant        • Can be overpainted when cured
  and all areas of high humidity                              can be cleaned away with a damp sponge                       • Solvent free, water based product
• Ideal for sealing shower bases and cubicles, around       • Suitable for interior and exterior use                       • For interior use only
  baths, sinks, basins and sanitary ware and around         • Flexibility factor 5%                                        • Life expectancy 25 years
  window and door frames in areas of high condensation      • Life expectancy 15 years                                     • Conforms to BS EN ISO 140/3
• Fast curing
                                                              Stock No           Size           Colour          Price        Stock No           Size            Colour         Price
• Forms a permanently flexible, waterproof rubber seal.
  Flexibility factor 25%                                      262892            310 ml          White            1.08        311761            400 ml            White           2.02
• Suitable for interior and exterior use                      262894            310 ml          Brown            1.08
• Life expectancy 30 years
• Independently tested by and certified by a NAMMAS
  accredited microbiological laboratory to show no
  mould growth after more than 10 years simulated
  ageing
• Conforms to ISO 11600
  Stock No          Size           Colour        Price
  311752           310 ml           White          5.27
  311753           310 ml        Translucent       5.27
  311754           310 ml           Ivory          5.27




                                                                                                                                   Everbuild Lead Mate Sealant
                                                                  Everbuild 175 Universal Acrylic
                                                                                                                           Lead Mate Sealant is specially formulated as an
                                                            Universal Acrylic is a high quality acrylic sealant.           alternative to mortaring lead flashing and sheet into
                                                            Features include                                               brick, stone and concrete. Features include
                                                            • Adheres to virtually all substrates, including brick,        • Adheres to brick, stone, concrete and timber
                                                              stone, concrete, plaster, timber and PVCu                    • Provides a fully waterproof joint that will not crack or
                                                            • Provides a long lasting, permanently flexible seal in a        shrink
                                                              wide variety of applications                                 • Non-corrosive and non-staining
                                                            • Can be overpainted when cured                                • Life expectancy 25 years
                                                            • Solvent free, water based product. Any excess sealant
                                                              can be cleaned away with a damp sponge                         Stock No           Size            Colour         Price
       Everbuild 115 Building Mastic                        • Suitable for interior and exterior use                         311762            310 ml         Lead Grey          5.92
                                                            • Contains an anti-fungal compound to prevent mould
Building Mastic is a traditional, general purpose, oil        growth
based, pointing mastic. Features include                    • Flexibility factor 7.5%
• Adheres to brick, stone, concrete and timber              • Life expectancy 15 years
• Typically used to seal composite sectional panels and
                                                              Stock No           Size           Colour          Price
  low movement vertical building joints
• Provides an effective waterproof seal                       311759            310 ml          White             1.37
• Can be overpainted when cured                               311760            310 ml          Brown             1.37
• Flexibility factor 7.5%
• For exterior use only
• Life expectancy 10 years
  Stock No          Size          Colour         Price
  311755           310 ml         White            1.63
  311756           310 ml         Brown            1.63
202                          EVERBUILD SILICONES & SEALANTS




     Everbuild Weather Mate Sealant                                   Everbuild Food Mate Sealant                            Everbuild Fire Mate Intumescent Sealant
Weather Mate Sealant is a multi-use sealant based on an       Food Mate Sealant is a high modulus, food safe, silicone      Fire Mate Sealant is an intumescent acrylic sealant that
advanced isoacrylic formula that provides the ultimate in     sealant and adhesive. Features include                        swells when exposed to temperatures in excess of 125ºC
sealant technology for adhesion to all surfaces. Features     • Designed specifically for sealing refrigeration units and   to prevent the passage of fire and smoke. Features
include                                                         areas where repeated food contact is likely                 include
• Adheres to a wide range of substrates, including            • Adheres to metals, glass, ceramics and most plastics        • Adheres to brick, stone, concrete and timber
  metals and timber and many problematic surfaces such        • Fast curing                                                 • Can be overpainted when cured
  as lead, galvanised steel, bitumen and roofing felts        • For interior use only                                       • For interior use only
• Product can be applied in wet weather, to wet surfaces      • Contains an anti-fungal compound to prevent mould           • Fire rating of up to 4 hours in certain joint
  and even underwater                                           growth                                                        configurations
• Resistant to all weather conditions                         • Life expectancy 25 years                                    • Fire rated to BS476 Part 20/22
• Can be overpainted when cured                               • Conforms to BS 5889 (B) and ISO 11600
                                                                                                                              Stock No           Size            Colour         Price
• Life expectancy 25 years                                    • FDA approved 21 CFR 177.2600
                                                                                                                              311767            310 ml           White           2.60
  Stock No           Size           Colour         Price        Stock No           Size            Colour        Price
  311763            310 ml           White          5.35        311765            310 ml           White           4.22




                                                                                                                             Everbuild Pyro Mate Silicone Sealant
       Everbuild Galva Mate Sealant                                   Everbuild Heat Mate Sealant                           Pyro Mate Sealant is a neutral cure, fire retardant, elastic
                                                                                                                            silicone sealant. Features include
Galva Mate Sealant is a high performance adhesive and         Heat Mate Sealant is a high modulus, heat resistant,          • Adheres to brick, stone, concrete, glass, metal and
sealant specially formulated for sealing high velocity duct   silicone sealant. Features include                               timber
work in heating and ventilation systems. Features             • Used as a high temperature, industrial sealant in           • Safe for use next to insulated glass units
include                                                          applications such as high performance gaskets and          • Suitable for interior and exterior use
• Adheres to galvanised and stainless steel                      oven doors                                                 • Flexibility factor 25%
• Fast curing                                                 • Fast curing                                                 • Life expectancy 35 years
• Solvent free, low odour product                             • Provides a long lasting, permanently flexible, 100%         • Fire rating of up to 4 hours in certain joint
• For interior use only                                          silicone seal                                                 configurations
• Contains an anti-fungal compound to prevent mould           • Suitable for interior and exterior use                      • Fire rated to BS 476 Part 20
  growth                                                      • Life expectancy 25 years
• Life expectancy 15 years                                    • Temperature resistant to 300ºC                                Stock No           Size            Colour         Price
• Conforms to DW 142 (D) and ISO 11600, F12.5P                • Conforms to BS 5889 (B) and ISO 11600                         311768            310 ml           White           7.90
  Stock No           Size           Colour         Price        Stock No           Size            Colour        Price
  311764            310 ml           Grey           2.07        311766            310 ml           Black         11.77




                                                                                                                                       Trade Counter open
                                                                                                                                8.15 am - 5.30 pm Monday to Friday
                                                                                                                                  and 8.30 am - 1.00 pm Saturday
                                            EVERBUILD SILICONES, SEALANTS & CLEANERS                                                                                          203




               Everbuild Fireseal                                    Everbuild 825 Silicone Sealant                              Everbuild Primers and Cleaners
            300 Intumescent Sealant                            Silicone 825 is a low modulus, neutral cure, silicone       Surface preparation products from the Tecnic
Fireseal 300 is an intumescent acrylic sealant that swells     sealant based on a filled alkoxy curing system. Features    Construction Brand, a range of high end specification
when exposed to temperatures in excess of 150ºC to             include                                                     products for professional and industrial applications
prevent the passage of fire and smoke. Features include        • Part of the Tecnic Construction Brand, a range of high
• Part of the Tecnic Construction Brand, a range of high         end specification products for professional and           Silicone Primer P1        For porous surfaces
  end specification products for professional and                industrial applications
                                                                                                                             Stock No                   Size                  Price
  industrial applications                                      • Used for expansion joints to stone, brick, concrete and
• Intumescent and acoustic sealant                               composite panels and perimeter pointing around all          311775                  1.25 litres               48.23
• Typically used for sealing joints, voids and irregular         types of window and door frames
  holes in fire walls, partitions and other structures and     • Skin over time: 45 minutes
  for internal perimeter pointing of fire rated door and       • Shore A hardness: 22-25
                                                                                                                           Silicone Primer NP2         For non-porous surfaces
  window frames                                                • Movement accommodation: -- 50%+                             Stock No                   Size                  Price
• Skin over time: 15 minutes                                   • Elastic recovery: 85%
                                  +                                                                                          311776                  1.25 litres               48.23
• Movement accommodation: -- 20%                               • Conforms to BS 5889 (A) and ISO 11600, F&G25LM
• Elongation recovery: 80%
                                                                 Stock No          Size            Colour        Price
• Elongation at break: 200%                                                                                                Surface Cleaner        For cleaning prior to application of
• Fire rating of up to 5 hours                                   311771           380 ml          White           4.43     all sealant types
• Fire rated to BS 476 Part 20                                   311772           380 ml          Brown           4.52
                                                                                                                             Stock No                   Size                  Price
                                                                 311773           380 ml         Brick Red        4.52
  Stock No            Size            Colour         Price
                                                                                                                             311777                    1 litre                  6.38
  311769             380 ml           White            5.60




                                                                     Everbuild S50 Silicone Sealant
                                                                                                                                      Everbuild Silicone Eater
 Everbuild Fireseal 400 Silicone Sealant                       Silicone S50 is a mid modulus, acetoxy curing, silicone
                                                               sealant for bath and sanitary applications. Features        Silicone Eater is an effective silicone sealant remover.
Fireseal 400 is a neutral cure, fire rated, elastic silicone   include                                                     Features include
sealant. Features include                                      • Part of the Tecnic Construction Brand, a range of high    • Removes all types of silicone sealant from baths,
• Part of the Tecnic Construction Brand, a range of high         end specification products for professional and             kitchen worktops, basins, showers and door and
  end specification products for professional and                industrial applications                                     window frames
  industrial applications                                      • Adheres to ceramics, acrylic, laminates, metals and       • Harmless to most surrounding surfaces
• Typically used for all building and glazing joints which       glass
  require a fire rating and sealing voids and irregular                                                                      Stock No                  Size                   Price
                                                               • Used in areas of high humidity such as bathrooms,
  holes in fire walls, partitions and other structures           toilets, showers and kitchens                               262830                   150 ml                    4.87
• Skin over time: 45 minutes                                   • The mid modulus nature of this formulation gives
• Movement accommodation: -- 50%  +                              improved adhesion and flexibility when compared to
• Elastic recovery: 85%                                          standard high modulus grades
• Elongation at break: 400%                                    • Contains a high level of powerful anti-fungal compound
• Fire rating of up to 4 hours                                   to prevent mould and fungal growth
• Fire rated to BS476 Part 20                                  • Skin over time: 15 minutes
  Stock No            Size            Colour         Price     • Cure time: 3-4 mm per 24 hours
                                                               • Movement accommodation: -- 25%+
  311770             380 ml            White           8.58    • Temperature range: -40ºC to 150ºC
                                                                 Stock No          Size            Colour        Price
                                                                 311774           310 ml           White          3.33
204                          EVERBUILD SEALANT GUNS & FOAMS




                   Sealant Gun                              Everbuild Fix & Fill Expanding Foam                             Everbuild Firefoam B2 Handheld
Standard duty skeleton gun                                Fix & Fill Expanding Foam is a quick setting, polyurethane   Firefoam B2 Handheld is a quick setting, fire rated,
                                                          based foam. Features include                                 polyurethane foam in a ready-to-use, hand held canister.
  Stock No               Capacity                Price
                                                          • Expands greatly on application and yields up to 50         Features include
  262280                  310 ml                  2.20      times original can contents                                • Expands greatly on application and yields up to 50
                                                          • Adheres to brick, stone, concrete, metals, timber,           times original can contents
                                                            plastics and PVCu                                          • Adheres to brick, stone, concrete, metals, timber,
                                                          • Can be cut, sawn, sealed and plastered over in just one      plastics and PVCu
                                                            hour                                                       • Fills wall and ceiling gaps and pipe access openings
                                                          • Fills irregular gaps, fixes framework, insulates and         and seals around door frames
                                                            deadens sound                                              • Fire resistant for up to two hours in certain joint
                                                          • Supplied with simple applicator tube                         configurations
                                                                                                                       • Conforms to BS476 Part 20 and DIN4102 Part 1 for
                                                            Stock No                  Size                  Price
                                                                                                                         construction materials; Class B2
                                                            262845                   750 ml                   5.57
                                                                                                                         Stock No                 Size                  Price
                                                                                                                         311783                  750 ml                   9.48




             Everbuild Sealant Guns
Sturdy skeleton gun with hexagonal rod, reinforced ring
and hook end
  Stock No               Capacity                Price
  262285                  310 ml                  3.10
  311779                  400 ml                  5.12


                                                           Everbuild Gun Grade Expanding Foam
                                                          Gun Grade Expanding Foam is a quick setting,                      Everbuild Firefoam B2 Gungrade
                                                          polyurethane based foam. Features include
                                                          • Expands greatly on application and yields up to 50         Firefoam B2 Gungrade is a quick-setting, fire rated,
                                                            times original can contents                                polyurethane foam designed for application through a
                                                          • Adheres to brick, stone, concrete, metals, timber,         standard foam applicator gun. Features include
                                                            plastics and PVCu                                          • Expands quickly on application and yields up to 50
                                                          • Can be cut, sawn, sealed and plastered over in just one      times original can contents
                                                            hour                                                       • Adheres to brick, stone, concrete, metals, timber,
                                                          • Fills irregular gaps, fixes framework, insulates and         plastics and PVCu
                                                            deadens sound                                              • Fills wall and ceiling gaps and pipe access openings
                                                          • High extrusion rate through an applicator gun which is       and seals around door frames
                                                            screwed onto the top of the can                            • High extrusion rate through an applicator gun which is
                                                          • Gun can be left on the can to allow the foam to be           screwed onto the top of the gun
                                                            reused                                                     • Gun can be left on the can to allow the foam to be
                                                                                                                         reused
                                                            Stock No                  Size                  Price
                                                                                                                       • Fire resistant for up to two hours in certain joint
                                                            311782                   750 ml                   5.57       configurations
        Everbuild Click 'N' Seal Gun                                                                                   • Conforms to BS476 Part 20 and DIN4102 Part 1 for
                                                                                                                         construction materials; Class B2
Lightweight sealant gun with unique patented method of                                                                   Stock No                 Size                  Price
holding the cartridge. Features include
• Quick and easy cartridge change                                                                                        311784                  750 ml                   9.65
• Easy rotation at corners
• Easier access to hard to reach places with no
  obstruction at the nozzle
• Accepts standard 310 and 400 ml cartridges and 290 ml
  thick wall cartridges
  Stock No               Capacity                Price
  311780                  400 ml                  6.93
                                                    EVERBUILD FOAM GUNS, FOAM CLEANERS                                                                                  205
                                                                            & ADHESIVES




     Everbuild Foam Applicator Guns                          Everbuild Pinkgrip Grab Adhesive                                    Everbuild Gun A Nail Extra
Applicator guns for standard and fire rated gun foams    Pinkgrip is a solvent based adhesive with exceptional        Gun A Nail Extra is a high strength, solvent based, quick
                                                         early grab characteristics and a very strong bond when       grab adhesive that replaces nails, screws and drilling.
  Stock No       Model No      Description       Price
                                                         cured. Features include                                      Features include
  311785            P45       Medium Duty        30.40   • Use on most building materials, including brick,           • Adheres to brick, concrete, stone, plaster, timber, metal
  311786            P65       Heavy Duty         53.28     concrete, timber, metals and most plastics                   and plastics
                                                         • Exceptional grabbing strength removes the need to pin      • Fixes skirting boards, wall panels, cladding, framework
                                                           under the workpiece to prevent slipping or slumping          and much more
                                                           and eliminates the need for double stick methods           • Quick grab adhesive that cures to form a high strength
                                                         • Fully cures in 24-48 hours to form a very strong bond on     bond
                                                           porous and non-porous surfaces                             • Good gap filling properties
                                                         • Excellent gap filling qualities to accommodate uneven      • Strong anti-slump properties
                                                           surfaces                                                   • Non-staining on porous substrates
                                                         • Good "nip-off" qualities to prevent messy stringing of     • Can be overpainted when cured
                                                           the adhesive                                               • Suitable for interior and exterior use
                                                         • Can be overpainted when cured
                                                                                                                        Stock No          Size            Colour         Price
                                                         • Suitable for interior and exterior use
                                                           Stock No           Size           Colour        Price        262836           310 ml            Beige           2.18
                                                                                                                        311789           400 ml            Beige           2.98
                                                           262890            350 ml           Pink           2.17




 Everbuild Dual Purpose Foam Cleaner
Dual Purpose Foam Cleaner is used to remove uncured
foam. Features include
• Compatible with most building substrates
• Spray nozzle for easy application
• Attaches to foam applicator guns for purging through
  Stock No                  Size                 Price
  311787                  500 ml                  9.35



                                                                                                                           Everbuild Stixall Grab Adhesive
                                                                      Everbuild Instant Nails
                                                                                                                      Stixall, a hybrid polymer grab adhesive, is the ultimate
                                                         Instant Nails is a water based, quick grab adhesive that     combined building adhesive and sealant with the power
                                                         replaces mechanical fixings in many home improvement         to both bond and seal virtually everything to anything.
                                                         applications. Features include                               Features include
                                                         • Adheres to brick, concrete, stone, plaster, timber,        • Bonds virtually all porous and non-porous materials
                                                           metal, PVCu and polystyrene                                  such as glass, marble, granite, mirrors, stone, concrete,
                                                         • Fixes skirting boards, dado rails, door surrounds, wall      brick, plasterboard, all metals, all hard plastics,
                                                           panels, framework and much more                              ceramics, fibreglass, timber and much more
                                                         • Quick grab adhesive that cures to form a high strength     • Incredible initial grab with high bonding strength
                                                           bond                                                       • Strong anti-slump properties
                                                         • Good gap filling properties                                • Can be applied to wet surfaces
                                                         • Can be applied to damp surfaces                            • Totally waterproof and weatherproof
                                                         • Solvent free, water based product with easy clean up       • Resistant to temperature extremes
                                                         • Can be overpainted when cured                              • Resistant to petrol and most chemicals
                                                         • Suitable for interior and exterior use                     • Solvent free and totally non-hazardous
                                                         • Life expectancy 25 years                                   • Non-staining on sensitive materials
                                                                                                                      • Can be overpainted when cured
                                                           Stock No          Size            Colour        Price      • Suitable for interior and exterior use
                                                           262835           310 ml           White           2.03     • Contains a powerful biocide to prevent mould growth
                                                                                                                      • Flexibility factor 20%
                                                                                                                      • Guaranteed for 40 years
                                                                                                                      • Temperature range: -40ºC to 150ºC
                                                                                                                        Stock No           Size           Colour         Price
                                                                                                                        262888            290 ml          White           5.60
                                                                                                                        311791            290 ml       Crystal Clear      6.40
206                            EVERBUILD ADHESIVES




       Everbuild Resintite Wood Glue                            Everbuild Pinkgrip Wood Bond D4                             Everbuild Thixotropic Contact Adhesive
Resintite is a traditional cabinetmakers powder resin       Pinkgrip Wood Bond is an industrial grade D4 wood              Stick 2 Thixotropic Contact Adhesive is a premium grade,
wood glue. Features include                                 adhesive based on advanced hybrid resin technology.            rubber based, non-drip adhesive suitable for use with a
• Easily mixed with water                                   Features include                                               wide variety of materials. Features include
• Forms a bond stronger than the wood itself                • Adheres to wood, brick, concrete, metal and plastic          • Adheres to decorative laminates, wood, rigid PVC,
• Good gap filling properties                               • Used for woodworking, joinery and commercial                   cork, rubber, metals and textiles
• Easy water clean up                                         assembly work                                                • Thixotropic formula allows application to vertical and
• Can be overpainted when dry                               • Provides a high strength, impact resistant, temperature        horizontal surfaces
• Water resistant, suitable for interior and exterior use     resistant bond                                               • Fast cure, but allows time for repositioning
• Conforms to EN204 D3 and EN 302-1 A3, Type 11             • Fast cure, sets in just 10 minutes                           • Provides a high strength bond
                                                            • Dries clear for good cosmetic finish                         • Good resistance to high temperatures
  Stock No           Size               Colour      Price
                                                            • Good gap filling properties                                  • Good water and rain resistance, suitable for interior
  311792            500 g               White        6.37   • Easy water clean up                                            and exterior use
  311793            1.5 kg              White       12.70   • Solvent free                                                 • Coverage is approximately 5 m² per litre
  311794             3 kg               White       22.18   • Can be overpainted when cured
                                                                                                                             Stock No             Description               Price
                                                            • Totally waterproof, suitable for interior and exterior use
                                                            • Conforms to EN 204 D4 Strength                                 311804                 5 litre Tin             38.67
                                                              Stock No                   Size                   Price
                                                              311799                    1 litre                   6.08




        Everbuild 502 All Purpose
       Weatherproof Wood Adhesive                                                                                              Everbuild Spray Contact Adhesive
All Purpose Weatherproof Wood Adhesive is a high
quality, resin based, wood adhesive for all wood bonding.                                                                  Stick 2 Spray Contact Adhesive is a convenient, all
Features include                                            Everbuild All Purpose Contact Adhesive                         purpose adhesive that bonds to most common materials.
• Provides a high strength, impact resistant bond                                                                          Features include
• Fast cure, sets in just 10 minutes                        Stick 2 All Purpose Contact Adhesive is a premium grade,       • Adheres to decorative laminates, wood, concrete,
• Dries clear for good cosmetic finish                      rubber based, contact adhesive suitable for use with a           stone, tiles, rubber, foam, metals, rigid plastics,
• Easy water clean up                                       wide variety of materials for both professional and DIY          polyethylene, canvas, cardboard, paper and cork
• Resists creep in stress joints                            use. Features include                                          • Ideal for securing most carpets and floor coverings
• Solvent free                                              • Adheres to decorative laminates, wood, rigid PVC,            • Spray application gives good surface coverage
• Can be overpainted when cured                               ABS, leather, cork, linoleum, rubber, stone, metals and      • Fast curing, but allows time for repositioning"
• Weatherproof, suitable for interior and exterior use        dense fabrics                                                • Suitable for interior and exterior use
• Conforms to EN 204 D3 and BS 4071                         • Easy to apply liquid formula                                 • Coverage is approximately 9 m² per litre
  Stock No                    Size                  Price   • Provides an instant, high strength bond                        Stock No                 Size                 Price
                                                            • Good resistance to high temperatures
  311795                     250 ml                  2.00   • Good water and rain resistance, suitable for interior          311805              500 ml Aerosol              3.50
  311796                     500 ml                  2.62     and exterior use
  311797                     1 Litre                 4.03   • Coverage is approximately 5 m² per litre
  311798                     5 Litres               18.33
                                                              Stock No               Description                Price
                                                              311800                 125 ml Tube                  2.68
                                                              311801                  250 ml Tin                  3.60
                                                              311802                  750 ml Tin                  5.20
                                                              311803                  5 litre Tin                20.93




                        All prices and descriptions correct at time of publication and are subject to change without notice
                                                                                               EVERBUILD ADHESIVES                                                    207




Everbuild Contact Adhesive Thinner & Cleaner                    Everbuild Mitre Fast Bonding Kit                          Everbuild Industrial Superglue HV
Stick 2 Contact Adhesive Thinner and Cleaner is a highly   Mitre Fast Bonding Kit is a two part instant adhesive      High viscosity, industrial grade superglue. Features
aggressive solvent. Features include                       system comprising a cyanoacylate adhesive and an           include
• Dilutes contact adhesives for priming purposes           aerosol activator. Features include                        • Bonds most plastics, metals, glass, rubber, MDF and
• Cleans up excess adhesive. Works on wet or dry           • Adheres to wood, MDF, rubber, metals and most              PVCu
  adhesive                                                   plastics, including PVCu                                 • For use on porous and non-porous surfaces
• Degreases surfaces prior to application of contact       • Bonds in 10 seconds with no mess                         • Good gap filling properties
  adhesives                                                • Particularly useful in furniture making, kitchen         • Sets in 10 to 30 seconds
                                                             assembly and plastics industries where precision         • Viscosity at 25ºC: 1500 cps
  Stock No                     Size                Price
                                                             instant bonding is required
                                                                                                                        Stock No         Size           Colour        Price
  311806                 250 ml Tin                 3.80   • Dries clear for good cosmetic finish
                                                                                                                        311810           20 g            Clear          1.83
                                                             Stock No        Adhesive        Activator       Price
                                                             311808            100 g           400 ml         10.12




    Everbuild Pipe Weld PVC Cement
                                                                                                                       Everbuild Acti-Pen Superglue Activator
Stick 2 Pipe Weld is a thixotropic, solvent-based, pipe
cement for use with low pressure thermoplastic pipes           Everbuild Industrial Superglue GP                      The Acti-Pen is the controlled way to apply superglue
and conduits. Features include                                                                                        activator. Features include
• Bonds PVC, PVCu and ABS                                  Medium viscosity, industrial grade superglue. Features     • Suitable for use with all cyanoacrylate superglues
• Combines a long open time with rapid rate of bond        include                                                    • High activator content means Acti-Pen sets superglues
  strength development                                     • Bonds most plastics, metals, glass, rubber, PVCu and       in 5 seconds
• Non-drip gel formula                                       EPDM                                                     • Covers approximately the same area as 3 x 200 ml tins
• Resistant to high temperatures                           • For use on non-porous surfaces with a good fit             of activator spray
• Conforms to BS 6209                                        (Maximum gap fill 0.1 mm)                                • Works on all common surfaces
                                                           • Sets in 5 to 15 seconds                                  • Prevents staining on PVCu
  Stock No       Description          Colour       Price
                                                           • Viscosity at 25ºC: 100 cps                                 Stock No         Size            Colour       Price
  311807          250 ml Tin          Clear         4.83
                                                             Stock No           Size           Colour        Price      311811           30 ml           Clear          4.83
                                                             311809             20 g            Clear          1.83




                                                                                                                           We accept Visa and Mastercard
                                                                                                                               Debit and Credit Cards
208                           EVERBUILD ADHESIVES




      Everbuild Rapid Epoxy Syringe                                Everbuild Hard Plastic Adhesive                             Everbuild All Purpose Superglue
Stick 2 Rapid Epoxy Adhesive is an industrial strength,       Stick 2 Hard Plastic Adhesive is a strong, clear, quick     Stick 2 All Purpose Superglue is a premium grade, high
two part clear adhesive. Features include                     drying adhesive suitable for bonding most hard plastics.    strength, cyanoacrylate adhesive. Features include
• Bonds metals, glass, wood, ceramics, concrete,              Features include                                            • Bonds most plastics, metals, glass, ceramics,
  rubber, fabrics, crystal, crockery, jewellery and various   • Bonds rigid PVC, PVCu, acrylic, polycarbonate and ABS       porcelain, rubber, leather, card, PVCu, wood and
  hard plastics                                               • Applications include guttering, sills and low pressure      jewellery
• Supplied in double syringe for easy application               pipework                                                  • Provides a fast, high strength bond to just about every
• Sets hard in just 4 minutes                                 • Suitable for interior and exterior use                      surface
• Good resistance to high temperatures                        • Temperature resistant to 100ºC                            • Tube supplied with a resealable cap
• Good water and rain resistance, suitable for interior
                                                                Stock No           Size           Colour        Price       Stock No          Size            Colour        Price
  and exterior use
                                                                311814            30 ml            Clear          1.07      311816             3g             Clear           0.86
  Stock No           Size            Colour        Price
  311812             24ml            Clear           2.00




                                                                         Everbuild Contact Adhesive                                   Everbuild Forever
                                                              Stick 2 Contact Adhesive is a premium grade, rubber
                                                                                                                                White Tile Adhesive and Grout
 Everbuild All Purpose Clear Adhesive
                                                              based, contact adhesive suitable for use with a wide        Forever White Waterproof Tile Adhesive and Grout
Stick 2 All Purpose Adhesive is a strong, clear, quick        variety of materials. Features include                      contains Mould Shield to stop mould, mildew and
drying adhesive. Features include                             • Adheres to decorative laminates, wood, rigid PVC,         bacterial growth. Features include
• Bonds ceramics, porcelain, wood, card, paper, most            ABS, leather, cork, linoleum, rubber, stone, metals and   • Mould Shield, which is integrated into the product
  plastics, leather, cork, linoleum, rubber, stone, glass,      dense fabrics                                               during the manufacturing process, is guaranteed to
  metals and dense fabrics                                    • Provides an instant high strength bond                      prevent grout line discolouration for at least 10 years
• Suitable for household repairs, hobbies and craft work      • Good resistance to high temperatures                      • Mould Shield also protects against long term
                                                              • Good water and rain resistance, suitable for interior       deterioration of adhesive strength which can occur
  Stock No           Size            Colour        Price        and exterior use                                            when bacterial growth attacks the adhesive behind the
  311813             30 ml           Clear           0.98       Stock No           Size           Colour        Price       fixed tile
                                                                                                                          • Non-slip
                                                                311815            30 ml           Beige           0.98    • Powershower proof
                                                                                                                          • Ideal for kitchens, bathrooms, wetrooms and showers
                                                                                                                          • Ten year guarantee against discolouration due to
                                                                                                                            mould growth
                                                                                                                            Stock No          Size            Colour        Price
                                                                                                                            311817           1 litre       Arctic White       4.62
                                                                                                                            311818           5 litres      Arctic White      19.70
                                                              EVERBUILD TILE ADHESIVES & GROUT                                                                                 209




            Everbuild Forever                                            Everbuild 701 Super Plus                                      Everbuild 703 Multi Plus
       White Powder Wall Tile Grout                                       Non Slip Tile Adhesive                                      Fix & Grout Tile Adhesive
Forever White Powder Wall Tile Grout is a cement based        Non-Slip Tile Adhesive is a ready mixed, general use, tile   Fix and Grout Tile Adhesive is a ready mixed, water
powdered grouting compound. Features include                  adhesive for bathrooms, kitchens and showers. Features       resistant, tile adhesive that has been formulated to be
• Contains Mould Shield to stop mould, mildew and             include                                                      used as both an adhesive and a grout. Features include
  bacterial growth                                            • Acrylic based formula for extra grab and slip resistance   • Premium grade, fully water resistant adhesive
• Contains PVA to promote adhesion and water proofing         • Easy to trowel with good wet edge                          • Suitable for humid environments and wet conditions
  to repel water                                              • Use in domestic showers in conjunction with Everbuild      • Easy to trowel with good wet edge
• Quickly mixed with water to give a pure white paste           Powdered Wall Tile Grout                                   • Dries to a brilliant white finish
• Easily applied to tile joints up to 3 mm                    • Mould resistant                                            • Contains a fungicide to prevent mould growth
• Powershower proof                                           • Coverage is approximately 0.75 m² per litre full bed and   • Coverage is approximately 0.75 m² per litre full bed and
• Ideal for kitchens, bathrooms, wetrooms and showers           1.25 m² per litre notched                                    1.25 m² per litre notched
• Ten year guarantee against discolouration due to            • Specifications/Approvals                                   • Specifications/Approvals
  mould growth                                                  BS 5980 Type 2 Class B                                       BS 5980 Type 2 Class AA
                                                                EN 12004 Type D1T                                            EN 12004 Type D2T
  Stock No           Size            Colour         Price
                                                                Stock No           Size           Colour         Price       Stock No           Size            Colour         Price
  311819            1.2 kg        Arctic White        2.85
                                                                311821           5 litres        Off White        6.30       311823            5 litres         White           13.55




 Everbuild Forever White Grout Reviver
                                                                       Everbuild 702 Aqua Plus                                Everbuild 705 Rapid Set Tile Mortar
Forever White Grout Reviver is the easy way to restore               Water Resistant Tile Adhesive
discoloured and dirty grout lines to a bright white finish.                                                                Rapid Set Tile Mortar is a fast setting, thick or thin bed,
Features include                                              Aqua Plus Tile Adhesive is a ready mixed, water              powder adhesive for bonding ceramic tiles to floors and
• Contains Mould Shield to stop mould, mildew and             resistant, tile adhesive for bathrooms, kitchens and         most walls. Features include
  bacterial growth                                            showers. Features include                                    • Bonds to most building substrates
• Supplied with an easy to use applicator                     • Premium grade, fully water resistant adhesive              • Quick setting mortar, ideal when same day fixing and
• Waterproof                                                  • Suitable for humid environments and wet conditions           grouting are required
• Covers approximately 20 m² of tiles                         • Easy to trowel with good wet edge                          • Fully water resistant
• Ideal for kitchens, bathrooms, wetrooms and showers         • Mould resistant                                            • Suitable for interior and exterior use
• Ten year guarantee against discolouration due to            • Coverage is approximately 0.75 m² per litre full bed and   • Coverage is approximately 0.3 m² per kg
  mould growth                                                  1.25 m² per litre notched                                  • Conforms to BS5980 Type 1 Class AA
                                                              • Specifications/Approvals
  Stock No           Size            Colour         Price                                                                    Stock No           Size             Colour        Price
                                                                BS 5980 Type 2 Class AA
  311820            200 ml        Arctic White        1.82      EN 12004 Type D2T                                            311824             20 kg             Grey          15.88
                                                                Stock No           Size           Colour         Price
                                                                311822            5 litres       Off White        8.27




                                   Trade Counter open 8.15 am - 5.30 pm Monday to Friday and 8.30 am - 1.00 pm Saturday




                                   Phone Lines open 7.30 am - 6.00 pm Monday to Friday and 8.30 am - 1.00 pm Saturday
210                            EVERBUILD TILE ADHESIVES, GROUT & SEALANT




    Everbuild 706 Floor Set Tile Mortar                                 Everbuild 713 White Set Tile                                Everbuild 707 Wide Joint Grout
Floor Set Tile Mortar is a normal setting, thick or thin bed,
                                                                              Mortar & Grout                                  Wide Joint Grout is a cement based, powdered, grouting
powder adhesive for bonding ceramic tiles to floors and         White Set Tile Mortar is a normal setting, thick or thin      compound for floor and wall tiles. Features include
most walls. Features include                                    bed, powder adhesive for bonding ceramic tiles to floors      • Easy to mix to give a smooth paste
• Bonds to most building substrates                             and most walls. Features include                              • Fully water resistant
• Normal setting (24 hour) mortar                               • Bonds to most building substrates                           • Shrink resistant
• Fully water resistant and suitable for continuous             • Use for white or light coloured tiles as product will not   • Use on joints up to 15 mm wide
  immersion                                                       show through                                                • Suitable for interior and exterior use
• Suitable for interior and exterior use                        • Can also be used as a grout (Dries off white)
                                                                                                                                Stock No          Size            Colour         Price
• Coverage is approximately 0.3 m² per kg                       • Normal setting (24 hour) mortar
• Conforms to BS 5980 Type 1 Class AA                           • Fully water resistant and suitable for continuous             311831            5 kg             Ivory          5.73
                                                                  immersion                                                     311832            5 kg          Sandstone         5.73
  Stock No           Size             Colour         Price
                                                                • Suitable for interior and exterior use                        311833            5 kg          Anthracite        5.73
  311825             20 kg             Grey           13.85     • Cover is approximately 0.3 m² per kg                          311834             5 kg         Limestone         5.73
                                                                • Conforms to BS 5980 Type 1 Class AA                           311835            5 kg             Grey           4.92
                                                                                                                                311836            10 kg            Grey          10.08
                                                                  Stock No           Size            Colour         Price
                                                                  311827             20 kg         Off White        14.58




             Everbuild 711 Rapid Set
              Flexiplus Tile Mortar
                                                                                                                                         Everbuild 402 Waterseal
Rapid Set Flexiplus Tile Mortar is a fast setting, thick or
thin bed, powder adhesive for bonding ceramic tiles to               Everbuild 704 Powder Wall Grout                          Waterseal is a high performance, transparent, water
floors and most walls. Features includes                                                                                      repellent sealant that provides long lasting protection
• Bonds to most building substrates                             Powder Wall Grout is a cement based, powdered,                from water damage. Features include
• With added latex powder for improved flexibility              grouting compound for bathrooms, kitchens and                 • Seals and protects all mineral substrates, including
• Ideal for laying tiles on prepared wooden floors              showers. Features include                                       brick, stone, concrete, pebble dash and render
• Quick setting mortar, use when same day fixing and            • Easy to mix to give a pure white paste                      • Does not contain solvents harmful to the user or the
   grouting are required                                        • Contains PVA to promote adhesion                              environment
• Fully water resistant                                         • Fully water resistant                                       • Non-flammable
• Suitable for interior and exterior use                        • Mould resistant                                             • Contains a fungicide to prevent mould growth
• Cover is approximately 0.3 m² per kg                          • Suitable for interior or exterior use
                                                                                                                                Stock No           Size           Colour         Price
• Conforms to BS 5980 Type 1 Class AA                           • Coverage is 4 m² (of tiled area) per kg
                                                                                                                                311837            5 litres         Clear         14.67
  Stock No            Size            Colour         Price        Stock No           Size            Colour         Price
                                                                                                                                311838           25 litres         Clear         69.58
  311826             20 kg             Grey           19.03       311828             1 kg            White           2.15
                                                                  311829             3 kg            White           5.20
                                                                  311830             10 kg           White          11.83




              Looking for an item not listed? Call our Sales Team on 01224 620944
                                                                     EVERBUILD PAINT, PUTTY & FILLER                                                                           211




           Everbuild Masonry Paint                               Everbuild 406 Stabilising Solution                              Everbuild 113 Plumbers Putty
Masonry Paint is an extremely durable, silicone modified,    Stabilising Solution is a specially formulated              Plumbers Putty is ready mixed, waterproof, non-setting
acrylic coating designed for exterior use over most          microscopically fine polymer emulsion which penetrates      putty. Features include
porous surfaces. Features include                            deeply into dusty, chalky and badly weathered surfaces      • Use for sealing and bedding WC soil pipes, joints in
• Formulated for easy application, good coverage and         to provide a stable base for decoration. Features include     sanitaryware, sinks and waste water fittings
  maximum hiding power                                       • Prepares a surface for paint, wallpaper, tiles etc. The   • Seals ceramics, vitreous enamels, metals and PVC
• Water repellent                                              ideal preparation for masonry paint                       • Permanently flexible to allow for joint movement
• Reduced dirt pick up                                       • Quick drying                                              • Contains a fungicide to prevent mould growth
• Solvent free                                               • Damp resistant                                            • Compatible with silicone sealants
• Contains a fungicide to prevent mould growth               • Solvent free                                              • Can be overpainted
• Smooth finish                                              • Coverage is 5 m² per litre
                                                                                                                           Stock No            Size            Colour          Price
• Coverage is 8-12 m² per litre
                                                               Stock No                   Size                 Price
• Guaranteed 15 year protection                                                                                            311846             750 g             Beige            2.87
                                                               311844                    5 litres              10.55
  Stock No          Size            Colour        Price
  311839           5 litres         White          17.23
  311840           5 litres       Sandstone        17.23
  311841           5 litres       Magnolia         17.23




                                                                                                                                      Everbuild Instant Filler
                                                                 Everbuild 101 Multi-Purpose Putty
                                                                                                                         Instant Filler is a fast drying, ready mixed filler in an easy
                                                             Multi-purpose putty is formulated using only the best       to use squeeze tube. Features include
                                                             grade linseed oil. Features include                         • Repairs brick, stone, concrete and plaster
             Everbuild Floor Paint                           • Use for glazing single glass into metal, softwood and     • No cracking or shrinking
                                                               hardwood frames                                           • Ready to sand in just 10 minutes
Floor Paint is a low viscosity, heavy duty, polyurethane     • Can be overpainted                                        • Solvent free
based paint for industrial floors. Features include          • Suitable for interior and exterior use                    • Can be overpainted when dry
• Provides a clean, hard wearing finish to concrete,           Stock No           Size              Colour     Price     • Suitable for interior and exterior use
  stone and wooden floors subject to light traffic such as
  fork lift trucks                                             311845             1 kg              Natural     1.45       Stock No            Size             Colour         Price
• Use on garage, workshop and storeroom floors and                                                                         311847             330 g             White            1.67
  walkways
• Maximum durability and excellent abrasion resistance
• Good resistance to oils and dilute acids and alkalis
• Solvent free
• Coverage is 8-10 m² per litre
  Stock No           Size           Colour        Price
  311842           5 litres          Red           27.08
  311843           5 litres          Grey          27.08
212                          EVERBUILD FILLERS, PROTECTORS & BRUSH CLEANERS




             Everbuild Powder Filler                                  Everbuild One Strike Filler                                        Cotton Dust Sheets
All Purpose Powder Filler is a high strength filler in     One Strike Filler is formulated using a lightweight polymer    Genuine cotton twill. Features include
powder form which mixes easily with water to form a        that fills holes and cracks (including deep holes) in just     • Large size, ideal for covering floors and furniture
creamy paste that is ideal for most decorating repairs.    one application. Features include                              • Protects from spills, splashes and dust
Features include                                           • Repairs brick, stone, concrete, plaster and wood             • Strong hardwearing cotton, resists damage from tools,
• Repairs brick, stone, concrete, plaster and wood         • Fills holes in just one application, no need for layers or     stepladders and feet
• No cracking or shrinking                                   secondary filling                                            • Reversible
• Ready to sand in 1 hour                                  • No shrinking, sagging or cracking                            • Machine washable at 40ºC
• Added PVA for extra strength, can be nailed and          • Dries smooth, requires little or no sanding
                                                                                                                            Stock No                  Size                  Price
  screwed when dry                                         • Dries fast, ready to paint in just 15 minutes
• Solvent free                                             • Non-staining, no migration into porous substrates              311852                 12 ft x 9 ft              10.13
• Can be painted, papered or stained                       • Contains a fungicide to prevent mould growth
• Suitable for interior and exterior use                   • Solvent free
                                                           • Suitable for interior and exterior use
  Stock No          Size            Colour        Price
                                                             Stock No                    Size                  Price
  311848            450 g           White           1.17
  262850            1.5 kg          White           2.20     262865                     500 ml                  3.00
  311849             9 kg           White          11.10     262870                     1 litre                 5.47
                                                             262875                     5 litres               20.97




                                                                                                                                            Brush Cleaner
                                                                                                                          Thin solvent based liquid that removes wet paint quickly
                                                                                                                          from brushes, rollers and pads. Features include
                                                                                                                          • Cleans gloss, emulsion and varnish
                                                                                                                          • Water washable
                                                                                                                          • Contains a conditioner to prolong brush/roller life
        Everbuild Ready Mixed Filler                                                                                        Stock No              Description               Price
                                                            Everbuild Roll & Stroll Floor Protectors
All Purpose Ready Mixed Filler is an easy to use, quick                                                                     311853                500 ml Bottle               1.83
setting filler. Features include                           Roll and Stroll is the ultimate self-adhesive floor
• Repairs brick, stone, concrete, plaster and wood         protector. Features include
• Dries to a smooth, tough, crack-resistant, sandable      • Protects carpets and other floorcoverings from damage
  finish                                                     caused by spillages and dirty boots
• Solvent free                                             • Safely protects stair coverings
• Can be painted, papered or stained                       • Quick and easy to unwind
• Suitable for interior and exterior use                   • Safer than dust sheets, no trip risk
                                                           • Heavy duty, anti-slip surface
  Stock No          Size            Colour        Price
                                                           • Won't tear or rip
  262855            600 g           White           1.45   • Waterproof and flameproof
  262860            1 kg            White           2.07   • Can be left down for up to 4 weeks without leaving a
                                                             sticky residue
                                                           • Many uses in DIY, building and industrial sectors

                                                           Roll & Stroll Carpet Protector
                                                             Stock No          Width               Length      Price
                                                             311850            600 mm              20 m        13.90

                                                           Roll & Stroll Hard Surface Protector
                                                             Stock No          Width               Length      Price                        Brush Restorer
                                                             311851            600 mm              20 m        14.72
                                                                                                                          Thin solvent based liquid that gives new life to hardened
                                                                                                                          and gummed up brushes. Features include
                                                                                                                          • Works on all paint types
                                                                                                                          • Water washable
                                                                                                                            Stock No              Description               Price
                                                                                                                            311854                 500 ml tin                 2.70
                                                             EVERBUILD CLEANING & PRESERVING LIQUIDS                                                                         213




           Paint and Varnish Stripper                                            White Spirit                                               Raw Linseed Oil
Thick semi-gelled non-drip formula. Features include         White Spirit is a solvent used for paint thinning and clean   Raw Linseed Oil is a traditional wood treatment.
• Works on most paints and varnishes                         up. Features include                                          Features include
• Softens paint in minutes for easy removal                  • Designed for thinning paints and varnishes                  • Nourishes and revives cricket bats, oak beams etc
• Clings to vertical surfaces                                • Use for cleaning up paint, cleaning paint brushes and       • Used as a lubricant for French polishing
• Solvent based, non caustic liquid                            as a general household cleaner/degreaser                    • Suitable for interior and exterior use
• Water washable                                             • Conforms to BS 245
                                                                                                                             Stock No                  Size                  Price
  Stock No               Description               Price       Stock No               Description               Price
                                                                                                                             311861                500 ml Bottle               2.58
  311855                  500 ml Tin                 2.70      262885                750 ml Bottle                1.85




                                                                                                                                                  Teak Oil
                Sugar Soap Liquid                                           Methylated Spirits
                                                                                                                           Teak Oil is a traditional wood treatment. Features include
Concentrated solution for dilution with water. Features      Mineralised Methylated Spirits is a multi-use industrial      • Replenishes the natural oils lost through ageing or
include                                                      alcohol. Features include                                       weathering to bring out the natural colour of wood
• Cleans and prepares all surfaces prior to painting         • Used as a solvent for wood varnishes, French polish         • Suitable for interior and exterior use
• Effectively removes grease, grime and nicotine               and spirit based paints
                                                                                                                             Stock No              Description               Price
• Ideal as a general household cleaner                       • Used for cleaning paint work and glass and wiping
• Dilution ratio 40:1                                          resin from wood                                               311862               500 ml Bottle               2.93
                                                             • Used as a fuel for heating and cooking
  Stock No               Description               Price
                                                               Stock No               Description               Price
  311856                500 ml Bottle                1.70
                                                               311859                500 ml Bottle                1.67




             Caustic Soda Powder
                                                                            Wallpaper Stripper
Caustic soda powder for solution in water. Features
include                                                      Highly concentrated solution of surfactants for dilution
• Mixes to provide up to 5 litres of caustic soda solution   with water. Features include
• Effectively unblocks drains and pipes                      • Penetrates and strips wallpaper fast
• Can be used as a heavy duty cleaner                        • Mixes to provide up to 20 litres of diluted solution
                                                             • Water washable
  Stock No               Description               Price
                                                               Stock No               Description               Price
  311857                500 gm Bottle                2.50
                                                               311860                500 ml Bottle                1.70
214                           RAWLPLUG PLASTIC WOOD & PLUGS/
                              EVERBUILD CLEANERS




                   Plastic Wood                                         Everbuild Wonder Wipes                               Everbuild All Jobs Hand Cleaner
Rawlplug Plastic Wood is solvent free, low odour, durable    Wonder Wipes are specifically formulated for builders      All Jobs Hand Cleaner is a citrus based hand cleaner
filler for minor wood repairs. Features include              and allied tradesmen. Features include                     specifically developed for builders and allied tradesmen.
• Repairs decorative woodwork, skirting boards, floors,      • Removes paint, sealants, adhesives, bitumens,            Features include
   furniture and frames                                        polyurethanes, expanding foams, polyesters, epoxies,     • Powerful gel formula with fine polybeads, a superior
• Once hardened, it can be sanded, painted, varnished,         oil, grease, petrol, inks and even silicone                skin friendly rubbing agent
   screwed and nailed                                        • Cleans hands, tools and non-porous surfaces              • Cleans paints, sealants, adhesives, bitumens, grease,
• Suitable for interior and exterior use                     • Contains lanolin to condition skin and prevent dryness     oil, petrol, inks and even silicone
• Colours can be mixed                                         and cracking                                             • Pleasant odour
                                                             • No need to rinse hands after use                         • Contains emollients to condition skin
  Stock No       Description        Colour          Price
                                                               Stock No               Pack Qty                 Price      Stock No                  Size                  Price
  261610         50 ml Tube         Pine             2.28
  261620         50 ml Tube         Teak             2.28      262878                    100                    7.05      262880                   1 litre                 5.10
  261630         50 ml Tube       Mahogany           2.28      311867                    300                   12.27      311870                   5 litres               12.47
  311863         50 ml Tube         Oak              2.28
  261640         100 ml Tube        Pine             5.69
  261650         100 ml Tube        Teak             5.69
  261660         100 ml Tube      Mahogany           5.69
  311864         100 ml Tube        Oak              5.69




                                                                     Everbuild Sugar Soap Wipes
                                                             Sugar Soap Wipes are specifically formulated for
                                                             preparing surfaces prior to painting. Features include
                                                             • Impregnated with powerful cleaning agents and
             Rawlplug Plastic Plugs                            detergents
                                                             • Effectively removes grease, grime and nicotine
Colour coded plastic plugs for lightweight fixing            • No rinsing required, dries quickly to leave surfaces
applications. Supplied and priced in packs of 100              ready to paint
  Stock No          Colour        Screw Size        Price      Stock No               Pack Qty                 Price
  018201            Yellow        No.4-No.10         1.51      262879                     35                    2.55
  018202             Red          No.6-No.10         1.80
  018203            Brown         No.10-No.14        2.38




           Plasterboard Plastic Plugs
Plasplugs brand. For lightweight fixings into plasterboard
walls
  Stock No       Screw Size        Pack Qty         Price
  311865            No. 8            25.00           1.27

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:347
posted:5/17/2011
language:English
pages:86