Docstoc

ADTRON S35HB HARD DISK DRIVE 3.5-INCH SCSI REPLACEMENT DISK

Document Sample
ADTRON S35HB HARD DISK DRIVE 3.5-INCH SCSI REPLACEMENT DISK Powered By Docstoc
					 ADTRON S35HB HARD DISK DRIVE
3.5-INCH SCSI REPLACEMENT DISK




               3.5-INCH SCSI DISK S35HB
                           May 2007. Rev. A




                    www.adtron.com
REVISION CONTROL

 Date           Revision Section(s)                 Description                                                Author
 May 2007       001          All                    All                                                        PN




ESD Caution - Handling
Static electricity may be discharged through this disk subsystem. In extreme cases this may temporarily interrupt the oper-
ation or damage components. To prevent this make sure that you are working in an ESD-safe environment. For example,
before handling the disk subsystem, touch a grounded device, such as a computer case, prior to handling.

Adtron Corporation
4415 E. Cotton Center Blvd.
Phoenix, AZ 85040
Tel: (602) 735-0300 • Fax: (602) 735-0349
Email: marketing@adtron.com
www.adtron.com

Made in the USA

All trademarks are the property of their respective owners.

The information contained in this document is subject to change without notice and does not
represent or imply warranty, and no liability is assumed by Adtron Corporation.
                                                                                                                                                                S35HB
                                                                                                                                                  2, 5, 10, 20 or 40GB
                                                   PRODUCT SPECIFICATION                                                                          3.5-inch SCSI Drives


CONTENTS

SCOPE ...................................................................1                 RELIABILITY .........................................................7

RELATED DOCUMENTS.......................................1                                  POWER REQUIREMENTS ....................................7

PRODUCT DESCRIPTION ....................................1                                  PHYSICAL CHARACTERISTICS ..........................7
  Benefits .......................................................................1
                                                                                           PERFORMANCE ...................................................8
  Applications ................................................................1
                                                                                           SCSI INTERFACE CHARACTERISTICS ..............8
STANDARD FEATURES .......................................2
                                                                                           SCSI COMMAND SET ...........................................9
PACKAGE DIMENSIONS ......................................3
                                                                                           JUMPER DESCRIPTIONS...................................10
PIN CONFIGURATION ..........................................4
                                                                                             SCSI ID.......................................................................10
  SCSI Connector Pinout ..............................................4
                                                                                             External LED .............................................................10
  Power Connector Pinout............................................4
                                                                                             SCSI Termination ......................................................10
SIGNAL DESCRIPTION ........................................5                                 Disconnects ..............................................................10

ABSOLUTE MAXIMUM RATINGS ........................6                                         COMPLIANCE .....................................................11

RECOMMENDED OPERATING CONDITIONS ....6                                                     ORDERING INFORMATION ................................12

ENVIRONMENTAL ................................................6                            ADTRON CONTACT INFORMATION..................14
  Humidity ......................................................................6
  Altitude ........................................................................6
  Shock...........................................................................6
  Vibration ......................................................................7




May 2007 Rev. A                                                                        i                 Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                           S35HB
                                                                                2, 5, 10, 20 or 40GB
                  PRODUCT SPECIFICATION                                         3.5-inch SCSI Drives




                     This page intentionally left blank.




May 2007 Rev. A                       ii           Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                           S35HB
                                                                                                2, 5, 10, 20 or 40GB
                                 PRODUCT SPECIFICATION                                          3.5-inch SCSI Drives


SCOPE
This product specification characterizes the S35HB for design engineers who are integrating the product into
the host system. Detailed information is provided on physical dimensions, supported commands, the electri-
cal interface and other characteristics.

RELATED DOCUMENTS
• ANSI X3.131-1994 (American National Standard for Information Systems, SCSI)
• Adtron SCSI Command Set OEM Manual (PN: 610200044, EN: J15047)
• S35HB Installation Manual (PN: 610200062)

PRODUCT DESCRIPTION
The Adtron S35HB SCSI drives offer standard capacity increments at 2, 5, 10, 20 and 40 GBytes in a stan-
dard 3.5-inch SCSI disk drive form factor. The S35HB drive uses the industry standard 2.5” IDE disk drive as
the storage device, allowing future capacity and feature upgrades. No software drivers are required for full
SCSI disk emulation. 5V only operation eliminates the requirement for 12V power supplies.

Benefits
• Extends the life of your legacy systems in the field
• Replaces hard-to-find or out-of-production SCSI legacy disks with new technology
• Delivers improved reliability with new parts rather than refurbished parts
• Integrates easily into existing platforms using the industry-standard SCSI interface and command set
• Reduces power consumption and heat dissipation with 5V only power
• Replicates the robust SCSI command set for simple integration
Applications
• Telecommunication switches
• Semiconductor manufacturing equipment
• Medical image processors and printers
• Digital copiers and printers
• Portable computers
• Instruments and data loggers
• Any devices requiring SCSI drive availability beyond end-of-life notice




May 2007 Rev. A                                          1         Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                        S35HB
                                                                                             2, 5, 10, 20 or 40GB
                             PRODUCT SPECIFICATION                                           3.5-inch SCSI Drives


STANDARD FEATURES

 Form Factor                 3.5-inch

 Interface Standard          Compliant with SCSI-2, narrow

 Mounting                    Hard disk drive industry standard for 3.5-inch disks, all orientations

 Connector                   Standard SCSI 50-pin, Single-Ended (SE)

 Addressing                  6, 10 and 12 byte read/write commands are supported

 Sectors                     Built-in support for 512 Byte sector operation.

 Data Reliability            1 in 1014 bits, read

 Input Voltage               5V only +/- 5%

 Onboard LED                 Idle, Busy, and Fault conditions

 Operating Temperatures      +5 to +40ºC (ambient)

 Warranty                    Warranty is valid for three (3) years when used under recommended oper-
                             ating conditions as defined by the information in this product specification.

 Table 1 Standard Features




May 2007 Rev. A                                     2           Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                                                    S35HB
                                                                                                                  2, 5, 10, 20 or 40GB
                                         PRODUCT SPECIFICATION                                                    3.5-inch SCSI Drives


PACKAGE DIMENSIONS
Refer to the figure below for enclosure and mounting dimensions of the S35HB 3.5-inch Drive.
Dimensions shown in mm[inches].
       Figure 1: Package Dimensions




                                                                         21.6 .852




                                                                                                                         1.3 .050
                                                                                                                                     9.0 .354
                        Front View                                                         Back View




                           LED
                                   JP1                                                 24.8 .975                                    7.0 .276




                                    6-32x3.8[.150] MAX. DEPTH (6X)
                Side View

                                                                                                                 Power and
                                                                                                                 Connector

                             6.4 .250          60.3 2.375            41.3 1.625                     28.6 1.125

                     Top View
                                                                2.9 .115                           95.3 3.750
                Power             Connector
                                                                                             Bottom View




                                                                                                                               41.3 1.625
146.1 5.750




                                                                                                                               44.5 1.750




                                                     LED and Jumpers
                    101.2 3.985
                                                                          6-32x3.8[.150] MAX. DEPTH (4X)




May 2007 Rev. A                                                      3               Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                              S35HB
                                                                                                     2, 5, 10, 20 or 40GB
                                 PRODUCT SPECIFICATION                                               3.5-inch SCSI Drives


PIN CONFIGURATION                                       Power Connector Pinout
                                                        Pin Number                         Description
SCSI Connector Pinout
                                                        1                                  +12V (not connected)
 Pin                        Pin                         2                                  Ground
 Number     Signal          Number        Signal
                                                        3                                  Ground
 1          GND             2             -DB0
                                                        4                                  +5V
 3          GND             4             -DB1
 5          GND             6             -DB2           Table 3
 7          GND             8             -DB3
 9          GND             10            -DB4
 11         GND             12            -DB5
 13         GND             14            -DB6
 15         GND             16            -DB7
 17         GND             18            -DBP
 19         GND             20            GND
 21         GND             22            GND
 23         RSVD            24            RSVD
 25         NC              26            TERMPWR
 27         RSVD            28            RSVD
 29         GND             30            GND
 31         GND             32            -ATN
 33         GND             34            GND
 35         GND             36            -BSY
 37         GND             38            -ACK
 39         GND             40            -RST
 41         GND             42            -MSG
 43         GND             44            -SEL
 45         GND             46            -C/D
 47         GND             48            -REQ
 49         GND             50            -I/O

 Table 2



 Figure 2: SCSI Pinout


                                     49                                      1                   1

                   2.54 [0.10]

                                     50                                      2
                                  0.64 [0.025]           2.54 [0.10]             5.08 [0.20]
                                  Square Contact


                                                              Dimensions in mm (inches)


May 2007 Rev. A                                     4              Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                     S35HB
                                                                                          2, 5, 10, 20 or 40GB
                            PRODUCT SPECIFICATION                                         3.5-inch SCSI Drives


SIGNAL DESCRIPTION
Signal Name           Pin                   Description
-BSY (BUSY)           36                    An “OR-tied” signal that indicates that the SCSI bus is in
                                            use.
-SEL (SELECT)         44                    An “OR-tied” signal used by an initiator to select a target or
                                            by a target to reselect an initiator.
-C/D (CONTROL/DATA)   46                    A signal sourced by a target that indicates whether control
                                            or DATA phase information is on the DATA BUS. Asserted
                                            indicates CONTROL (i.e., COMMAND, STATUS, and MES-
                                            SAGE phases).
-I/O (INPUT/OUTPUT)   50                    A signal sourced by a target that controls the direction of
                                            data movement on the DATA BUS with respect to an initia-
                                            tor. Asserted indicates INPUT. This signal is also used to
                                            distinguish between SELECTION and RESELECTION
                                            phases.
-MSG (MESSAGE)        42                    A signal sourced by a target to indicate the MESSAGE
                                            phase or a DATA phase depending on whether C/D is true
                                            or false. Asserted indicates MESSAGE or DT DATA.
-REQ (REQUEST)        48                    A signal sourced by a target to indicate a request for an
                                            information transfer on the SCSI bus.
-ACK (ACKNOWL-        38                    A signal sourced by an initiator to respond with an acknowl-
EDGE)                                       edgment of an information transfer on the SCSI bus.
-ATN (ATTENTION)      32                    A signal sourced by an initiator to indicate the ATTENTION
                                            condition.
-RST (RESET)          40                    An “OR-tied” signal that indicates the RESET condition.
-DB(7-0) (DATA BUS)   2, 4, 6, 8, 10,       Eight data-bit signals that form the 8-bit DATA BUS
                      12, 14, 16

-DBP (PARITY)         18                    A signal sourced by the SCSI device driving the data bus
                                            during ST DATA phases. This signal is associated with the
                                            DB (7-0) signals and is used to detect the presence of an
                                            odd number of bit errors within the byte. The parity bit is
                                            driven such that the number of logical ones in the byte plus
                                            the parity bit is odd.
TERMPWR               26                    Normally sourced by the SCSI host adapter and used to
                                            supply Termination Power to SCSI devices on the bus.
                                            Standard configuration uses Vcc for TERMPWR.
GND                   1, 3, 5, 7, 9, 11,    Ground
                      13, 15, 17, 19, 20-
                      22, 29-31, 33-35,
                      37, 39, 41, 43, 45,
                      47, 49

                      25                    Open

                      23, 24, 27, 28        Reserved


 Table 4


May 2007 Rev. A                                    5         Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                                          S35HB
                                                                                                               2, 5, 10, 20 or 40GB
                                        PRODUCT SPECIFICATION                                                  3.5-inch SCSI Drives


ABSOLUTE MAXIMUM RATINGS
 Parameter                                           Value
 Voltage (Vcc)                                       -0.3 to +6.25
 Voltage - Input (Vin) / Output (Vout)               -0.3 to Vcc+0.5
 Non-operating Temperature                           -40°C to 65°C
 Thermal Gradient                                    20°C/h or less

 Table 5


RECOMMENDED OPERATING CONDITIONS
 Parameter
 Temperature - Operating (Ta)              +5°C to +40°C (ambient)
                                           +5°C to +45°C (disk enclosure surface)
 Voltage (Vcc)                             4.75V to 5.25V - 5V (typ)
 Power-On Time                             250 H/month or less
 Operating Time                            20% or less of Power-On Time
 Table 6


ENVIRONMENTAL                  Note 1


Humidity
 Relative Humidity - Operating                 8% to 90%, non-condensing
 Relative Humidity - Non-operating             5% to 95%, non-condensing
 Maximum Wet Bulb                              29°C (operating), 40°C (non-operating)
 Table 7

Altitude

 Altitude - Operating                           -300m to 3000m
 Altitude - Non-operating                       -300m to 12,000m
 Table 8

Shock
Half-sine pulse.

 Shock - Operating                               2940 m/s2 0-peak (300g 0-peak) 2ms duration (without non-recov-
                                                 ered errors)
 Shock - Non-operating                           8820 m/s2 0-peak (900g 0-peak) 1ms duration;
                                                 1176 m/s2 0-peak (120G 0-peak) 11 ms duration (no damage)

 Table 9
Note 1
         Performance, power and environmental specifications can vary based on the actual hard disk drive installed as the disk media.
         Values shown are typical of the S35HB operation with a Fujitsu MHV2040AH hard disk drive installed. Adtron assumes no respon-
         sibility for the suitability of this product in the intended application.



May 2007 Rev. A                                                    6             Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                                          S35HB
                                                                                                               2, 5, 10, 20 or 40GB
                                        PRODUCT SPECIFICATION                                                  3.5-inch SCSI Drives


Vibration
Swept-sine, 1/4 octave per minute.

 Vibration - Operating                           5 to 500 Hz, 9.8/s2 0-peak (1g 0-peak) (without non-recovered errors)
 Vibration - Non-operating                       5 to 500 Hz, 49m/s2 0-peak (5g 0-peak) (no damage)

 Table 10


RELIABILITY            Note 1

 Item                                   Value
 Data Reliability                       1 in 1014 bits, read
 MTBF                                   525,000 hours
                                        (Telcordia Issue 1 Method 1 Case 3; 25ºC; Ground Benign, Controlled)
 Preventative Maintenance               None
 Table 11


POWER REQUIREMENTS
 Parameter                                     Value                                               Units
 Start-up current (Peak)                       1.15                                                A
 Active current                                Read                       .75                      A
                                               Write                      .65                      A
 Standby                                       .25                                                 A

 Table 12


PHYSICAL CHARACTERISTICS
 Height                                                                21.6mm [0.852"]
 Width                                                                 101.2mm [3.985"]
 Depth                                                                 146.1mm [5.75"]
 Weight                                                                13.5oz/390g
 Table 13




Note 1
         Performance, power and environmental specifications can vary based on the actual hard disk drive installed as the disk media.
         Values shown are typical of the S35HB operation with a Fujitsu MHV2040AH hard disk drive installed. Adtron assumes no respon-
         sibility for the suitability of this product in the intended application.



May 2007 Rev. A                                                    7             Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                             S35HB
                                                                                                  2, 5, 10, 20 or 40GB
                                      PRODUCT SPECIFICATION                                       3.5-inch SCSI Drives


PERFORMANCE
Item                                                      Performance (Narrow)
Start up times (Reset to Selection)                       250 ms or less
Start up times (Standby to Active)                        4 sec (max)
Controller Overhead                                       2 ms (max)
Read (Sustained)       1                                  14 MB/sec (on transfers of 128 blocks)
Write (Sustained)     1                                   14 MB/sec (on transfers of 128 blocks)
Read (Burst)                                              20 MB/sec
Write (Burst)                                             20 MB/sec
 Table 14


SCSI INTERFACE CHARACTERISTICS
Parameter Parameter                        Test
Symbol    Description                    Conditions            Min                   Max                   Unit
VIH               Input High Voltage                           2.0                VCC + 0.5                  V
VIL               Input Low Voltage                          VSS -0.5                 0.8                    V
VOH               Output High Voltage    IOH = -2mA            2.4                   VCC                     V

VOL               Output Low Voltage     IOL = 48mA            VSS                    0.5                    V
C                 Capacitance                                                        16.0                   pF

 Table 15




1 On transfers of 128 blocks.



May 2007 Rev. A                                       8              Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                                  S35HB
                                                                                                       2, 5, 10, 20 or 40GB
                                     PRODUCT SPECIFICATION                                             3.5-inch SCSI Drives


SCSI COMMAND SET
For a detailed description of supported commands, re-
fer to the Adtron SCSI Command Set OEM Manual (PN:
610200044, EN: J15047).

                            Com-
                            mand                   See
 Command                    Code       Type        Note
 Card Information           C0h        V
 Format Unit                04h        M           2
 Change Definition          40h        O           8
 Inquiry                    12h        M
 Mode Select (6)            15h        O           3
 Mode Select (10)           55h        O
 Mode Sense (6)             1Ah        O
 Mode Sense (10)            5Ah        O
 Read (6)                   08h        M
 Read (10)                  28h        M
 Read (12)                  A8h        O
 Read Buffer                3Ch        O
 Read Capacity              25h        M
 Read Defect Data           37h        O           7
 Read Long                  3Eh        O           6
 Release                    17h        M
 Request Sense              03h        M
 Reserve                    16h        M
 Reset Card                 C1h        V
 Seek (6)                   0Bh        O           1
 Seek (10)                  2Bh        O           1
 Send Diagnostic            1Dh        M           4
 Start/Stop Unit            1Bh        O
 Test Unit Ready            00h        M
 Verify (10)                2Fh        M
 Verify (12)                Afh        O
 Write (6)                  0Ah        M
 Write (10)                 2Ah        M                      Notes:
 Write (12)                 Aah        O                       1. No operation; returns good status.
                                                               2. The mandatory implementation of FmtData and CmpLst
 Write Buffer               3Fh        O                            bits are not supported.
 Write and Verify (10)      2Eh        O           5           3. Parameter list length values greater than zero (0) are ac-
                                                                    cepted but not acted upon.
 Write and Verify (12)      Aeh        O                       4. Self-test only supported.
                                                               5. Does not verify. Performs a Write (10) operation.
Type: M = Mandatory, O = Optional, V = Vendor Unique           6. Read Long transfer length must be a multiple of 512 bytes
 Table 16                                                      7. Read Defect Data always returns an empty defect list.
                                                               8. Change Definition only supported for SCSI-2.




May 2007 Rev. A                                           9              Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                                  S35HB
                                                                                                       2, 5, 10, 20 or 40GB
                                            PRODUCT SPECIFICATION                                      3.5-inch SCSI Drives


JUMPER DESCRIPTIONS
 1,2,4              SCSI ID (See Table 15)                   SCSI Termination
 B                  Disable Disconnects                      The S35HB includes active termination that is
                                                             enabled by default. Termination may be disabled by
 A                  Reserved                                 installing a jumper on pins labeled TD on JP1. See
 TD                 Termination Disable                      Figure 4 for pinouts. Refer to Figure 3 for the location
 LED                (See description below)                  of JP1 on the S35HB.

 Table 17
                                                               Figure 4: JP1 Jumper Diagram


External LED




                                                                           Anode
The jumper shown in Figure 3 can be used to install




                                                                           LED
a remote-mounted LED. An LED can be connected to
the pins labeled LED and powered externally.




                                                                               LED
                                                                           Cathode
 Figure 3: Front View with JP1 Jumper detail

                                    LED
                                    Anode                    Disconnects
                                                             SCSI disconnects are controlled by the SCSI host
                                                             adapter. Disconnects are enabled by default on the
                                                             S35HB. Without using the host adapter controls, dis-
                                   LED
                                                             connects can be disabled by installing a jumper on
                                   Cathode                   pins labeled B on JP1. See Figure 4 for pinouts. Re-
                                                             fer to Figure 3 for the location of JP1 on the S35HB.
The pins marked with an “X” are connected to signal ground

SCSI ID
The SCSI ID is determined by installing jumpers on
JP1 pins 4, 2, and 1, or no jumpers for ID 0.


     SCSI ID       JP1 “4”         JP1 “2”         JP1 “1”
         0           OFF             OFF              OFF
         1           OFF             OFF              ON
         2           OFF              ON              OFF
         3           OFF              ON              ON
         4              ON           OFF              OFF
         5              ON           OFF              ON
         6              ON            ON              OFF
         7              ON            ON              ON
 Table 18




      May 2007 Rev. A                                         10          Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                   S35HB
                                                                                        2, 5, 10, 20 or 40GB
                              PRODUCT SPECIFICATION                                     3.5-inch SCSI Drives


COMPLIANCE
The S35HB complies with the following requirements.

EMC/Emissions EN 55022:1998+A1 & A2; CISPR 22:1997; FCC CFR 47 Part 15 Subpart B:2002
Safety            UL IEC 60950-1:2003; CSA C22.2 No. 60950-1
EMC/Immunity      EN 61000-4-2:1995; EN 61000-4-3:1998; EN 55024:1998, CISPR 24:1997

 Table 19




May 2007 Rev. A                                       11   Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                S35HB
                                                                     2, 5, 10, 20 or 40GB
                  PRODUCT SPECIFICATION                              3.5-inch SCSI Drives


ORDERING INFORMATION


  S35HB-XXG C YYY N
                                  Compliance
                                  N = RoHS compliant

                                  Configuration
                                  01 = Standard configuration

                                  Temp
                                  C = +5 to +40°C

                                  Capacity
                                  2G, 5G, 10G, 20G, 40G




Model Number                 Capacity
S35HB-2GC01N                 2GBytes
S35HB-5GC01N                 5GBytes
S35HB-10GC01N                10GBytes
S35HB-20GC01N                20GBytes
S35HB-40GC01N                40GBytes




May 2007 Rev. A              12         Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                              S35HB
                                                                                   2, 5, 10, 20 or 40GB
                  PRODUCT SPECIFICATION                                            3.5-inch SCSI Drives




                    This page intentionally left blank.




May 2007 Rev. A                         13            Adtron Corporation • www.adtron.com • (602) 735-0300
                                                                                                  S35HB
                                                                                       2, 5, 10, 20 or 40GB
                               PRODUCT SPECIFICATION                                   3.5-inch SCSI Drives


ADTRON CONTACT INFORMATION

Headquarters and North American Sales
4415 E. Cotton Center Blvd.
Phoenix, AZ 85040
Tel: (602) 735-0300
Fax: (602) 735-0349
Email: nasales@adtron.com
Web: http://www.adtron.com

European Sales
Zurich Switzerland                   Augsburg, Germany
Tel: +41-56-496-5640                 Tel: +49.821.589.9914
Fax: +41-56-496-5648                 Fax: +49.821.589.7190
Email: eurosales@adtron.com          Email: deutsche@adtron.com

Asia and International Sales
Phoenix, AZ 85040
Tel: (602) 735-0300
Fax: (602) 735-0349
Email: international@adtron.com

Adtron Worldwide Technical Support
4415 E. Cotton Center Blvd.
Phoenix, AZ 85040
Tel: (602) 735-0300
Fax: (602) 735-0359
Email: techsupport@adtron.com




May 2007 Rev. A                                 14        Adtron Corporation • www.adtron.com • (602) 735-0300

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:108
posted:5/16/2011
language:English
pages:18