Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

MOULD RELEASE AGENT

VIEWS: 58 PAGES: 2

  • pg 1
									Geochem Mould Release Agent
CI/Sfb: Yt4
January 2007




              MOULD RELEASE
              AGENT
                Geochem Mould Release Agent is
                formulated for application onto timber,
                plywood, steel and plastic mould and
                formwork     before  casting   concrete.
                Geochem Mould Release Agent allows
                subsequent removal without damaging the
                concrete face.

                Geochem Mould Release Agent is ready
                to use straight from the container and can
                be used on white cement.

                Geochem Mould Release Agent gives a
                better release and excellent coverage. It
                also helps the controlled hydration of
                cement and protects steel from rust. It can
                be applied to metal or timber moulds and
                will not corrode or damage the moulds.
                 TECHNICAL DATA                                                                   CLEANING
Form               Liquid                                         Any excess material in the bottom of the moulds
                                                                  should be mopped up with a clean cloth prior to the
Storage Life       12 Months stored between 5°C and 25°C in
                   original containers                            placement of concrete. Clean tools and equipment
                                                                  with white spirit immediately after use.
Specification writers: These values are not intended for use in
                                                              ®
preparing specifications. Please contact your local Geocel                                      PACKAGING
Sales Representative prior to writing specifications on this
product.                                                          Geochem Mould Release Agent is available in 5
                                                                  litre containers packed in boxes of 4 and 25L
           SURFACE PREPARATION                                    drums.
Ensure all surfaces are clean, dry and sound.
                                                                                     HEALTH AND SAFETY
                    APPLICATION                                   Flammable flashpoint >40°C, refer to full Health and
                                                                  Safety data sheet, available on request.
Apply Geochem Mould Release Agent undiluted
by spray, brush or roller ensuring a thin even
coverage before each casting                                                          TECHNICAL SERVICE
                                                                  For further technical information, advice on
Due to porosity new and untreated tubes should be                 suitability for specific applications, or detailed Health
coated with Geochem Mould Release Agent at                        and Safety information, contact Geocel® Technical
least 36 hours before being used. A second                        Service.
application should then be made before using for
                                                                  IMPORTANT NOTE The information contained herein is offered in good faith and is
the first time.                                                   believed to be accurate. However, because conditions and methods of use of our
                                                                  products are beyond our control, this information should not be used in substitution for
                                                                  customer’s tests to ensure that Geocel’s products are safe, effective and fully
Do not apply excessive amounts of release oil so                  satisfactory for the intended end use. Suggestions of use shall not be taken as
                                                                  inducements to infringe any patent.
that it is running down the mould, as this could be
                                                                  Geocel’s sole warranty is that the product will meet the Geocel sales specifications in
detrimental and cause damage to the edge detail.                  effect at the time of shipment.

                                                                  Your exclusive remedy for breach of such warranty is limited to refund of purchase
                                                                  price or replacement of any product shown to be other than as warranted.

                      COVERAGE                                    Geocel specifically disclaims any other express or implied warranty of fitness for a
                                                                  particular purpose or merchantability.

Approximately 10 – 15 sq. metres per litre.                       Geocel disclaims liability for any incidental or consequential damages.




                                               Geocel Limited
               Western Wood Way, Langage Science Park, Plympton, Plymouth, Devon, PL7 5BG
                       Tel: 01752 334350 Fax: 01752 202065 Email: info@geocel.co.uk
                                            www.geocel.co.uk

								
To top