LINC brochure Exterior final qxd

Document Sample
LINC brochure Exterior final qxd Powered By Docstoc
					Chemical
Metering
 Pumps
Up To 15,000 psi High
Pressure Pneumatic                                                                                       The Reliability Continues...
Chemical Metering Pumps
                                                                                                         T    he LINC "T" series timer features a self
                                                                                                              draining design that flushes water and
                                                                                                                                                               Timer
B    ased on a philosophy of continuous improvement, LINC introduces a new series of high-durability
     and high-pressure pneumatically actuated pumps. Called the LINC 94P Series, this series of
chemical metering pumps is the premier pump in the LINC line by delivering previously unsurpassed
                                                                                                         entrained fluids caught in the air supply from
                                                                                                         the internal mechanism of the timer. Due to
                                                                                                         this self-draining design, the "T" Series Timer                 Diaphragm
reliability and high operating pressures up to 15,000 psi.                                               is less likely to stall due to fluid accumulation
The Strength in Reliability                                                                              inside the pneumatic cavities.                                                                                1/4”
Comes from the Free-Floating piston head design that pushes against an independent plunger. Unlike                                                                                                                    FNPT
any other pump in the industry, the 94P uses the piston housing to guide the piston and the dual-pack-      Additional Features of the                                                                      Muffler
ing seals to guide the plunger. The result is concentric operation of the plunger stroke reducing seal      LINC "T" Series Timer Include:
wear and maintenance to the lowest levels in the industry.                                                  •Simplified field-serviceable
Springs are another maintenance issue with pumps. In the 94P we have made the piston spring larger           design
to absorb more energy from the stroke. The result is better spring performance contributing to lower        •Corrosion resistant 316 ss
maintenance.                                                                                                 construction
                                                                                                            •Molded diaphragm for                                                                        Muffler
  Key Features Include:                                                                                      enhanced repeatability
  •2 models in 1/4" and 1/2"                                                                                •Infinite stroke adjustment
                                                                                                                                                              Knob
                                                                                                                                                                         Adjustment
   plunger sizes to deliver pressures                                                                        with 100:1 turndown ratio                                     Screw
   of 15,000 and 12,000 psi
  •Corrosion Resistant through the
   use of 316 Stainless Steel
   construction and Carbide Check                                                                        Single Acting Relay                                                          Relays for the Big Pumps
   Valve Balls                                                                                                                                                                        Big pumps require a larger air supply
                                                                                                                                                                                      volume to operate. This is due to the
  •Ceramic Plungers and Dual-Plunger
                                                                                                                                Air/Gas Supply                                        expanded size of their piston head
   Seals contribute to reduced maintenance
                                                                                                                                                                                      requiring a larger volume of air supply
  •Easy high-pressure installation through
                                                                                                                                                                                      to move the plunger the same amount
   the use of optional AutoclaveTM Discharge
                                                                                                                                                                                      of distance. Because of that, the LINC
   Check Valves                                                                                                Exhaust
                                                                                                                                                                                      94P-12 features a single-acting relay,
  •API 675 Performance                                                                                                                                                                with expanded supply volume through-
  Oil and Gas Injection Applications Include:                                                                                                                                         put, to drive the pump.
  •Methanol, Biocides, and Accelerant Injection
  •Corrosion, Paraffin, and Scale Inhibitors
                                                                                                                                                                                        Key Features Include:
                                                                                                                                                                                        •Simplified field-serviceable
  •H2S, CO2, and O2 Scavengers                                94 P11                                                                                         To Pump
                                                                                                                                                                                         design
  •Dye for Diesel Fuel
                                                                                                                                                                                        •Corrosion resistant 316 ss
  Process Injection Applications Include:                                                                                                                                                construction
  •Bio-fluids into Medication Preparation                                    94 P12                        Signal                                                                       •Positive air supply shut-off
  •Biocides, Sulfides and Amines for                                                                       From                                                                          through the use of a molded
                                                                                                           Timer
   Boiler Treatment                                                                                                                                            Relay used on             disc ensures a consistent
  •Foaming & Anti-Foaming Agent Injection                                                                                                                      94P-12 Only               speed and rate of stroke.
  •Sulfites into the Vining Process
  •Dies & Additives for Food & Beverage
                                                                                                  Piston                           Installation     Timer
                                                                                                  Plunger
                                                                                                                                                                                                     Rate
                                                                                                  Seal Retainer                                                                                      Setting                    Air/Gas
                                                                                                                                    Relay                       LINC 94P-12                          Gauge                      Dryer
                                                                                                                                                                Metering Pump
                                                                                                  Piston Spring
                                                                                                                                                                                                                                             Pressure                      Air/Gas
                                                                                                                                                                                                                                             Regulator                     Supply


                                                                                                                                                                                                                                              Inlet                        Chemical
                                                                                                                                                                                                                                              Filter                       Supply
                                                                                                                                                                                       Check Valve
                               Chemical

                                                                                                                                                                                      Flow
                                                                                                                                                                                      Meter                                             Process Fluid

                                                                                                                                                    Totalizer
                      LINC 94P                                                                    Discharge
                                                                                                  Check Body


                                                                                                                                   General Specifications
                                                                                                                                     94P-11 & 12 Series – Pneumatic, Plunger – Type Metering Pump
            Ordering Chart:                                                                                                          Wetted Parts:                                                               Pneumatic Section:
            LINC 94P                                                                                                                   Pump Body: . . . . . . . . . .316 ss                                         Piston Housing: . . . . . . . .316 ss
                                                                                                                                       Plunger: . . . . . . . . . . . . .Ceramic                                    Timer: . . . . . . . . . . . . . .316 ss
                                                                                                                                       Plunger Seal: . . . . . . . . . .Refer to Ordering Chart                     Relay: (94-12 series only) 316 ss
                                                                                                                                       O-Rings: . . . . . . . . . . . . .TFE                                     Plunger Diameter: . . . . .1/4” & 1/2”
                                          Series:                                                                                    Check Valves:                                                               Pressure: . . . . . . . . . . . . .To 15,000 psi, maximum
                                          94P–Pneumatic plunger type metering pump                                                     Body: . . . . . . . . . . . . . . .316 ss
                                                                                                                                       Ball: . . . . . . . . . . . . . . . .Carbide                              Optional Materials: . . . .Hastelloy, Monel
                                          Plunger Diameter/Pump Control:                                                               Spring - Discharge: . . . . .316 ss                                                                             & Titanium
                                          11–1/4” plunger diameter, timer                                                              Seat: . . . . . . . . . . . . . . . .TFE
                                          12–1/2” plunger diameter, timer/relay combination

                                          Plunger Seal:
                                          4–Mechanical seal–TFE/Graphite
                                          5–Mechanical seal–TFE/Glass/Moly
                                          6–Mechanical seal–Ultra High Molecular Weight Polyethylene
                                                                                                                                   Selection Chart
                                          Piston Size:                                                                               94P-11 & 12 Series – Pneumatic, Plunger – Type Metering Pump
                                          2–3” piston diameter used with 1/4” Plunger                                                94P-11 1/4” Plunger with Timer:                                             94P-12 1/2” Plunger with Timer and Relay:
                                          5–5” piston diameter used with 1/2” Plunger                                                  Plunger Diameter: . . . . . . . . . . . . . . . . . .1/4”                    Plunger Diameter: . . . . . . . . . . . . . . . . . .1/2”
                                                                                                                                       Piston Diameter: . . . . . . . . . . . . . . . . . . . .3”                   Piston Diameter: . . . . . . . . . . . . . . . . . . . .5”
                                          Discharge Check Valve Options:
                                                                                                                                       Max. Rate Gal/hr: . . . . . . . . . . . . . . . . . . .0.64                  Max. Rate Gal/hr: . . . . . . . . . . . . . . . . . . .2.0
                                          1–1/4” NPT (Female)
                                                                                                                                       Max. Rate Liter/hr: . . . . . . . . . . . . . . . . . .2.42                  Max. Rate Liter/hr: . . . . . . . . . . . . . . . . . .7.6
                                          2–Autoclave/HIP medium pressure (20,000 psi) 7/16”-20 (Female)
                                                                                                                                       Min. Rate Gal/hr: . . . . . . . . . . . . . . . . . . .0.006                 Min. Rate Gal/hr: . . . . . . . . . . . . . . . . . . .0.03
                                          3–Autoclave/HIP high pressure (60,000 psi) 9/16”-18 (Female)
                                                                                                                                       Min. Rate Liter/hr: . . . . . . . . . . . . . . . . . .0.024                 Min. Rate Liter/hr: . . . . . . . . . . . . . . . . . .0.10
                                          Other:                                                                                       Max. Pressure psi . . . . . . . . . . . . . . . . . . .15,000                Max. Pressure psi . . . . . . . . . . . . . . . . . . .12,000
                                            S
                                          5–Specify your Requirements                                                                  Max. Pressure bar . . . . . . . . . . . . . . . . . . .1030                  Max. Pressure bar . . . . . . . . . . . . . . . . . . .820
                                                                                                                                       Theoretical Amp. Ratio . . . . . . . . . . . . . . .144:1                    Theoretical Amp. Ratio . . . . . . . . . . . . . . .100:1
                                          Option Number:                                                                               Strokes per Minute . . . . . . . . . . . . . . . . . .4-50                   Strokes per Minute . . . . . . . . . . . . . . . . . .4-40
                                          ( x )–If the pump does not require any special modifications, Omit “Other” and “Option       Volume per Stroke . . . . . . . . . . . . . . . . . .0.80 cc                 Volume per Stroke . . . . . . . . . . . . . . . . . .3.20 cc
                                          Number” from the part number. If the pump does require special modifications, use “5”        Stoke Length . . . . . . . . . . . . . . . . . . . . . .1”                   Stroke Length . . . . . . . . . . . . . . . . . . . . . .1”
                                          for “Other”, and “(x)” for the option number when placing an order. The factory will
                                          replace the “(x)” with an unique option code at the time of pump production.                 Notes:
                                                                                                                                       1.Maximum rates are based on 1” stroke.
                                          Example: 94P-12-55-25(3).                                                                    2.Minimum rates are based on 1/8” stroke.
                                 ( )                                                                                                   3.The timer supply pressure range is 20 to 150 psi.
LINC 94P-         -        -                                                                                                           4.Maximum pressure based on 130psi supply pressure for 1/4”, 150psi supply pressure for 1/2”.
Example: 94P-12-55-25(3)                                                                                                               5.Volume per stroke shown is maximum available. Volume per stroke may decrease by up to 20% at maximum pressure.

                                                                                                                                                                                                                                               Autoclave is a trademark of Autoclave Engineers.
Accessories
 Check Valves                                                                                    Micron & Screen Mesh Filters
 Provided as standard equipment on LINC pumps,                                                   The LINC Filters provide a low cost way to help
 the check valves provide a convenient way to install                                            maintain your injection system as well as protect
 replacement suction, discharge, and inline check                                                the purity of the process chemical.
 valves for most metering pump applications.
                                             Features Include:
                                             •Two-piece design for quick disassembly and easy
                                              maintenance. No tedious suction or discharge                                                  Features Include:
                                              end tooling required for service.                                                             •Available in 2, 10, 25, & 75 micron and 100
                                             •Corrosion resistant design. Supplied with                                                      mesh filter sizes
                                              Carbide check balls as a standard, the check                                                  •Models available to handle pressures to 1000
                                              valve balls are also available in Ceramic and                                                  and 5000 psi
                                              Hastelloy as an option. The housings are                                                      •Long-life spun fiberglass micron or 316 ss cores
                                              engineered to be corrosion resistant through the                                              •Optional Fluorocarbon and Nitrile seals available
                                              use of 316 ss as a standard with Monel,
                                              Hastelloy, and Titanium available as an option.                                               •Corrosion Resistant 316 ss components
                                             •Sizes range from ¼" to ¾" NPT
                                             •Equipped with tough TFE–Teflon seats for
                                              durability
                                             •Optional metal-to-metal bearing seats available


 Injection Quills                                                                                Rate Gauge
 Used for spraying an injected chemical into chemi-                                               For calibrating the injection rate of the pump.
 cal lines under pressure.




                                             Features Include:
                                             •An in-line check valve with Carbide ball                                                      Features Include:
                                              components as a standard.                                                                     •Sight glass tube protected by a cast aluminum
                                                                                                                                             frame.
                                             •Optional length insertion probe nozzle to
                                              facilitate injecting the chemical into the                                                    •Allows calibration in gallons or liters
                                              center 1/3 of the pipeline.                                                                   •Retains a sliding "O" ring for bench marking the
                                             •Corrosion resistant 316 ss housing                                                             fluid starting level




 CHEMJEXTM Chemical Injection Systems
 Need a Turn-Key solution to a Chemical Injection
 Application? Our seasoned engineering professionals
 can help build a custom system to your specification
 or propose a solution to fit your application.                                                                                             Features Include:
                                                                                                                                            •A wide selection of metering pumps from LINC,
                                                                                                                                             LMI, Milton Roy, and Williams
                                                                                                                                            •Supply Tanks and Control Enclosures available in
                                                                                                                                             durable Polycarbonate, Stainless Steel, or
                                                                                                                                             Fiberglass
                                                                                                                                            •Capable of moving fluids in a wide range of flow
                                                                                                                                             rates and pressures
                                                                                                                                            •Containment skids available
                                                                                                                                            •Pneumatic and Electric Flow Tracking available




                                                                                              ISO 9001 Certified
LINC Milton Roy • 201 Ivyland Road • Ivyland, PA, USA • 215.441.0800 • www.lincpumps.com • info@lincpumps.com
                                                                                                                                                                                           31024

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:1
posted:5/11/2011
language:English
pages:4
mikesanye mikesanye
About