austin 131-308 by liuhongmei

VIEWS: 707 PAGES: 178

									                 LOCKS, LATCHES
                          & CATCHES               Locks . . . . . . . . . . . . . . . . . . . . . . . . . .132, 190-195, 197-198
                                                  Flush “D” Ring Latches - Round . . . . . . . . . . . . . . . . .133-136
                                                  Single and Multi-Point Cams for “D” Ring Latches . . . . . .137
                                                  Flush Square “D” Ring Latches, Single Point . . . . . . . . . . .137
                                                  Flush “D” Ring Latches - Square . . . . . . . . . . . . . . . . .138-139
                                                  Safety Slam Lock Systems . . . . . . . . . . . . . . . . . . . . .140-146
                                                  Paddle Handle Latches, Mini, Single Point . . . . . . . . .147-150
                                                  Paddle Handle Latches, Junior, Single Point . . . . . . . .151-153
                                                  Paddle Handle Latches, Standard, Single Point . . . . . .153-155
                                                  Paddle Handle Latches, Large, Single Point . . . . . . . .156-157
                                                  Flush Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157-161
                                                  Travel Trailer Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
                                                  Paddle Latches, Multi-Point . . . . . . . . . . . . . . . . . . . . . . . .162
                                                  Recessed Push-Button Locks . . . . . . . . . . . . . . . . . . .163-166
                                                  Latches . . . . . . . . . . . . . . . . .167-170, 196, 207-211, 295-308




                                                                                                                                          LOCKS, LATCHES & CATCHES
                                                  Rotary Paddle Latch . . . . . . . . . . . . . . . . . . . . . . . . . .170-173
                                                  Paddle Handle Latch, Cable Actuating . . . . . . . . . . . . . . . .173
                                                  Paddle Latches, Multi-Point . . . . . . . . . . . . . . . . . . . . .174-177
                                                  Paddle Handle Recessed Door Locks . . . . . . . . . . . . . . . . .178
                                                  Latch Systems . . . . . . . . . . . . . . . . . . . . . . . . . . .179-187, 237
                                                  Flush Folding “T” Latches, Single Point . . . . . . .187-189, 199
                                                  Flush Folding “T” Latches, Multi-Point . . . . . . . . . . . .199-200
                                                  Slam Latches, Multi-Point . . . . . . . . . . . . . . . . . . . . . .200-202
                                                  Multi-Point Roller Latch Assembly . . . . . . . . . . . . . . . . . . .203
                                                  Dead Bolt Latches . . . . . . . . . . . . .204-206, 212-236, 238-243
                                                  Sliding Door Latches . . . . . . . . . . . . . . . . . . . . . . . . . .244-252
                                                  Draw Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253
                                                  Rotary Latches . . . . . . . . . . . . . . . . . . . . . . . . . .253-268, 270
                                                  Eye Rods and Brass Fittings . . . . . . . . . . . . . . . . . . . . . . . .269
                                                  Cab Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271-273
                                                  Compartment Latches . . . . . . . . . . . . . . . . . . . . . . . . .274-281
                                                  Slam Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282, 291
                                                  Spring Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283
                                                  End Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283-290, 291
                                                  Spring Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291
                                                  Rod and Rod Guides . . . . . . . . . . . . . . . . . . . . . . . . . .292-293
                                                  Refrigerator Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294




CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                            w w w. a u s t i n h a r d w a r e . c o m
                                                                                                                                          131
                                     800-821-3520
                                                                                       www.austinhardware.com

                           Locks

                           Flush Mounted                                                                          No. 8005 BLK
                           Corrosion-Water-Resistant                                                              Non-key-locking with nuts and washers to secure cam.
                           Key-Locking or Non-Key-Locking                                                         Matte black (MB) finish.

                           Easy Installation                                                                      No. 8006-50 BLK 501
                           With its low-profile design, the Compartment Latch can be flush mounted                Key-locking with nuts and washers to secure cam.
                           for use on a wide variety of enclosures. It installs easily in panels up to            Matte black (MB) finish.
                           7/8” thick with one plastic hex nut, so there are no screws or brackets to
                           struggle with.
                           Has two lock nuts and washer for adjusting. The pawl has a grip range of
                           3/4” to 3-11/16 when used with the striker.

                           Durability
                           Designed to withstand exposure to harsh ambient conditions, the latch
                           components are made of corrosion-resistant materials including engineer-
                           ing-grade plastic, chrome-plated cast zinc and stainless steel. Plastic
                           components meet UL-94 requirements for flammability, and are UV-Light
                           stabilized. O-Ring and mounting gasket prevents water penetration
                           through receptacle.

                           Choice of Styles
LOCKS, LATCHES & CATCHES




                           Compartment latch is available in both key-locking and non-key-locking
                           styles. The locking version (No. 1-8106) features a stainless steel dust
                           cover on the lock cylinder for extra protection against corrosive materials.




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
132                                                                                                                     800-821-3520
                                                       www.austinhardware.com

Flush “D” Ring Latches - Round

Flush “D” Ring Latches, Round, Single Point
Single point "D" Ring Latch,
6-1/8˝ O.D., key-locking, Cam style,
Stainless steel

No. 2101L SS RH
Right Hand

No. 2101L SS LH
Left Hand




Single point "D" Ring Latch,
4-7/8˝ O.D., key-locking, Cam style,
Stainless steel




                                                                                                                          LOCKS, LATCHES & CATCHES
No. 2101S SS RH                                RH Pictured
Right Hand

No. 2101S SS LH
Left Hand




No. 279L SS
Single point "D" Ring Latch,
6-1/8˝ O.D., key-Locking,
with 5/16˝ square shank,
Stainless steel

No. 279L SS HP
Single point "D" Ring Latch,
6-1/8˝ O.D., key-locking,
with 5/16 x 1-1/2˝ square shank,
Mounting holes in pan under
the crossbar rather than flange.
Stainless steel

No. 279S SS
Single point "D" Ring latch,
4-7/8˝, key-locking,
with 5/16˝ square shank,
Stainless steel


                                           279L SS shown




                         All parts also available in carbon steel with zinc finish. Consult customer service.
                                               NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                       800-821-3520                       133
                                                                                      www.austinhardware.com

                           Flush “D” Ring Latches - Round
                           “L” Handle

                           No. 79L SS
                           Single point "D" Ring Latch, 6-1/8˝ O.D., non key-locking, with 5/16 x 4˝
                           square shank, Stainless steel

                           No. 79L SS HP
                           Single point "D" Ring Latch, 6-1/8˝ O.D., non key-locking, with 5/16 x 1-1/2˝
                           square shank, Mounting holes in pan under crossbar rather than flange,
                           Stainless steel

                           No. 79L SS 2TH
                           Single point "D" Ring Latch, 6-1/8˝ O.D., non key-locking, with 5/16 x 1˝
                           square shank, Mounting holes in pan under crossbar rather than flange,
                           Stainless steel

                           No. 79L SS SPEC E-1
                           Single point "D" Ring Latch, 6-1/8˝ O.D., non key-locking, with 5/16˝ x 4˝
                           square shank, Mounting holes in pan under crossbar rather than flange,
                           Stainless steel

                           No. 79L SS BM 2.375
                           Single point "D" Ring Latch, 6-1/8˝ O.D., non key-locking with 5/16˝ x 2-3/8˝
LOCKS, LATCHES & CATCHES




                           tapped square shank, 10-32 thread, no mounting holes, Stainless steel




                           No. 79L 1.93
                           Single point "D" Ring Latch, 6-1/8˝ O.D., non key-locking with 5/16˝ x 1-15/16˝
                           tapped square shank 3/8-16 x 1/2˝ thread, no mounting holes,
                           Stainless steel, Part No. 3245 gasket included (see page 5)

                           No. 79S SS
                           Single Point "D" Ring Latch, 4-7/8˝, non key-locking, with 5/16˝ square shank,
                           Stainless steel



                           Single point "D" Ring Latch, 6-1/8˝ O.D., non key-locking, Cam style,
                           Stainless steel
                           No. 101L SS RH
                           Right Hand

                           No. 101L SS LH
                           Left Hand

                                                                                                                                                  RH Pictured
                           No. 101L SS LH BM
                           Single point "D" Ring Latch, 6-1/8˝ O.D., non key-locking, Cam style,
                           with (4) 10-24 x 1/2˝ Stainless steel mounting studs, Stainless steel




                           Single Point "D" Ring Latch, 4-7/8˝, non key-locking, Cam style,
                           Stainless steel
                           No. 101S SS RH                                                               Large Shown
                           Right Hand

                           No. 101S SS LH
                           Left Hand


                                                    All parts also available in carbon steel with zinc finish. Consult customer service.
                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
134                                                                                                                    800-821-3520
                                                             www.austinhardware.com

Flush “D” Ring Latches - Round

Flush “D” Ring Latches - Round, 2-Point
Note: On multi-point assemblies all "D" ring latches, rods, rod guides, end bolts, and gaskets are sold separately.
Please consult our customer service department if you have any questions.


No. 2102L SS
2-point "D" Ring Latch, 6-1/8˝ O.D.,
key-locking, for use with rods and
rod guides, Stainless steel

No. 2102S SS
2-point "D" Ring Latch, 4-7/8˝ O.D.,
key-locking, for use with rods and
rod guides, Stainless steel




                                                                                                                         LOCKS, LATCHES & CATCHES
No. 292L SS
2-point Slamming style "D" Ring Latch, 6-1/8˝ O.D.,
key-locking, for use with rods and flush
or offset end bolts, Stainless steel

No. 292S SS
2-point Slamming style "D" Ring Latch,
4-7/8˝ O.D., key-locking, for use with rods and
flush or offset end bolts, Stainless steel




No. 102L SS
2-point "D" Ring Latch, 6-1/8˝ O.D.,
non key-locking, for use with rods
and rod guides, Stainless steel

No. 102L RS SS BM
2-point "D" Ring Latch, 6-1/8˝ O.D.,
non key-locking, with reversed cam
and (4) 10-24 x 1/2˝ Stainless steel
studs, for use with rods and rod guides,
Stainless steel

No. 102S SS
2-point "D" Ring Latch, 4-7/8˝ O.D.,
non key-locking, for use with rods and rod guides,
Stainless steel




                         All parts also available in carbon steel with zinc finish. Consult customer service.
                                                     NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                135
                                                                                        www.austinhardware.com

                           Flush “D” Ring Latches - Round

                           No. 92L SS
                           2-point Slamming style "D" Ring Latch,
                           6-1/8˝ O.D., non key-locking, for use with rods
                           and flush or offset end bolts,
                           Stainless steel

                           No. 92S SS
                           2-point Slamming style "D" Ring Latch,
                           4-7/8˝ O.D., non key-locking, for use with rods
                           and flush or offset end bolts,
                           Stainless steel
LOCKS, LATCHES & CATCHES




                           Also available in carbon steel with zinc finish. Consult customer service.


                           Lock Cylinders for “D” Ring Latches                                                    Lock Cylinders for “D” Ring Latches
                           No. 2101S-51 1250                                                                      No. 2101L-51 1250
                           Used on 4-7/8˝ dia. “D” Ring Latches                                                   Used on 6-1/8˝ dia. “D” Ring Latches
                           Key No. 1250                                                                           Key No. 1250



                           Other key numbers are available.
                           Some may be Lead Time Items.

                           Gaskets for Round “D” Rings                                                            Gaskets for Round “D” Rings

                           No. G-9                                                                                No. G-6
                           Gasket for 6-1/8˝ O.D. key-locking "D" Ring Latches                                    Gasket for 6-1/8˝ O.D. non key-locking "D" Ring Latches

                           No. G-8                                                                                No. G-6 SPECIAL
                           Gasket for 4-7/8˝ O.D. key-locking "D" Ring Latches                                    Neoprene gasket for 79-L-SS-BM and 79-L-SS-BM-2.375, coated on both
                                                                                                                  sides
                                                                                                                  with acrylic adhesive with a temperature range of -120° to 170° F

                                                                                                                  No. G-7
                                                                                                                  Gasket for 4-7/8˝ O.D. non key-locking "D" Ring Latches




                                                                                 NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
136                                                                                                                      800-821-3520
                                                             www.austinhardware.com

Single and Multi-Point Cams for “D” Ring Latches

Single Point Cams
Single point cam for No.'s 101 and 2101 series
"D" ring latches, Zinc finish

No. 101-16 ZN RH
Right Hand

No. 101-16 ZN LH                                                                                    Right Hand shown
Left Hand




2-Point Cams

No. 102-16 ZN
Will allow any single point "D" ring latch to be
turned into a 2-point latching system, Zinc finish




                                                                                                                                           LOCKS, LATCHES & CATCHES
                                                                                               102-16 ZN RS shown
No. 102-16 ZN RS
Same as No. 102-CAM-ZC except studs and
holes are in reversed position, Zinc finish




3-Point Cams
Will allow any 2-point "D" ring latching system
to be turned into a 3-point system, Zinc finish

No. 103-16 ZN RH
Right Hand

No. 103-16 ZN LH                                                                                                        Right Hand shown
Left Hand




Also available with reverse studs

Flush Square “D” Ring Latches, Single Point

No. 79-L-SD-SS
Single point rectangular "D" Ring Latch, non key-locking,
with 5/16˝ square shank, black vinyl handle, Stainless steel




                         All parts also available in carbon steel with zinc finish. Consult customer service.
                                                     NOTE: All items depicted in this catalog are for reference only.

                                    CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                                  137
                                                                                     www.austinhardware.com

                           Flush “D” Ring Latches - Square

                           No. 9000-SS
                           Single point square
                           "D" Ring Latch, key-
                           locking, with 5/16˝ x
                           3-13/16˝ square shank,
                           black powder coated
                           handle, (4) 7/32˝ dia.
                           mtg. holes on 3-15/16˝
                           centers, polished
                           Stainless steel

                           No. G9000
                           Gasket for No. 9000-SS
LOCKS, LATCHES & CATCHES




                           No. 9001-SS
                           Single point square
                           "D" Ring Latch, non
                           key-locking, with 5/16˝ x
                           3-13/16˝ square shank,
                           black PVC coated
                           handle, (4) 7/32˝ dia.
                           mtg. holes on 3-15/16˝
                           centers, polished
                           Stainless steel

                           No. G9001
                           Gasket for No. 9001-SS




                           Single point square "D" Ring Latch, key-locking, Cam style, black powder coated
                           handle, (4) 7/32˝ dia. mtg. holes on 3-15/16˝ centers, polished Stainless steel

                           No. 9010-SSR
                           Right Hand

                           No. 9010-SSL
                           Left Hand

                           No. G9000
                           Gasket for 9010-SSR
                           and 9010-SSL




                                                       All parts also available in carbon steel with zinc finish. Consult customer service.
                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
138                                                                                                                   800-821-3520
                                                           www.austinhardware.com

Flush “D” Ring Latches - Square

Single point square "D" Ring Latch, non key-locking, Cam style, black powder coated handle,
(4) 7/32˝ dia. mtg. holes on 3-15/16˝ centers, polished Stainless steel

No. 9011-SSR
Right Hand

No. 9011-SSL
Left Hand

No. G9001
Gasket for 9011-SSR
and 9011-SSL




Flush Square "D" Ring Latches, 2-Point
2-point square "D" Ring Latch, key-locking, black powder coated handle,




                                                                                                                                     LOCKS, LATCHES & CATCHES
(2) 1/4˝ dia. studs for attaching rods, (4) 7/32˝ dia. mtg. holes on
3-15/16˝ centers, polished Stainless steel

No. 9020-SS-RH
Right Hand

No. 9020-SS-LH
Left Hand

No. G9000
Gasket for 9020-SS-RH and 9020-SS-LH




No. 9021-SS-RH
Right Hand - Non-Locking

No. 9021-SS-LH
Left Hand - Non-Locking

No. G9001
Gasket for 9020-SS-RH and 9020-SS-LH




No. 9030-SS
Key-Locking D-Ring latch set up for three-point applications.
Same as 9010-SS single-point with additional studs for rod
attachment. Furnished in bright polished stainless steel with
black coated handle.

No. 9031-SS
Non-Locking bright polished stainless steel.




   Flush square "D" Ring Latches are also available in 3-point configuration. Consult customer service for details and lead times.
                          All parts also available in carbon steel with zinc finish. Consult customer service.
                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                              139
                                                               www.austinhardware.com

                           Safety Slam Lock Systems




                                                                                                              w w w. a u s t i n h a r d w a r e . c o m
LOCKS, LATCHES & CATCHES




                                               LOCKS LATCHES & CATCHES
                                            CALIFORNIA | GEORGIA | | INDIANA | MISSOURI | PENNSYLVANIA TEXAS WISCONSIN
                                       CALIFORNIA | GEORGIA | IDAHOINDIANA | MISSOURI | PENNSYLVANIA || TEXAS|| WISCONSIN




                                                        NOTE: All items depicted in this catalog are for reference only.

                                           CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
140                                                                                             800-821-3520
                                                                              www.austinhardware.com
                                                                                   www.austinhardware.com
Safety Slam Lock Systems
Safety Slam Lock Systems ----------------------------------------------------------
                         Series 206® and 207™ Eberhard Safety Slam Lock System Options
                              Series 206, 206X, 207, 207X, are trademarks of Eberhard Mfg. Co., Div. The Eastern Co.

       Series 206-X™
       206-XU R&L                        Patented locking assembly w/vertical locking button, inside locking knob, split tumblers, spacers, pillar




                                                                                                                                                                                                                LOCKS LATCHES & CATCHES
                                         locking provision. Standard 5/16" sq. activating tumbler for inside and outside handle engagement.
       1-206-XU R&L                      Locking assembly similar to 206-XU R&L, but supplied with shortened vertical lock button.
       2-206-XU R&L                      Locking assembly similar to 206-XU R&L, but supplied with vertically attached non-key-locking inside
                                         handle (zinc die-cast, chrome-plated).
       5-206-XU R&L                      Locking assembly similar to 2-206-XU R&L assembly, but with attached inside handle mounted horizon-
                                         tally. (Only activates upward for passenger safety.)
       12-206-XU R&L                     Locking assembly similar to 2-206-XU R&L, but supplied with shortened vertical lock button.

       Series 206®                       Automatic Unlocking Series (see CAUTION below)
       206-U R&L                         Patented locking assembly similar to 206-XU R&L, but provided with automatic unlocking feature. When
                                         engaged in striker, latch assembly remains unlocked. Pillar locking from outside at all times.
       1-206-U R&L                       Locking assembly similar to 206-U R&L, but supplied with shortened vertical lock button.
       2-206-U R&L                       Locking assembly similar to 206-U R&L, but supplied with vertically attached non-key-locking inside




                                                                                                                                                                                                                                      LOCKS, LATCHES & CATCHES
                                         handle (zinc die-cast, chrome-plated).
       5-206-U R&L                       Locking assembly similar to 2-206-U R&L, but with attached inside handle mounted horizontally. Only
                                         activates upward for passenger safety.
       12-206-U R&L                      Locking assembly similar to 206-U R&L, but supplied with shortened vertical lock button.

       Series 207-X™
       207-XU R&L                        Patented locking assembly similar to 206-XU R&L lock assembly, but supplied with one horizontally
                                         mounted outside remote control lever.
       1-207-XU R&L                      Locking assembly similar to 207-XU R&L, but supplied with one vertically mounted inside remote control
                                         lever.
       2-207-XU R&L                      Locking assembly similar to 207-XU R&L, but with vertically mounted remote control lever.
       5-207-XU R&L                      Locking assembly similar to 207-XU R&L assembly, but with inside vertically attached non-locking handle.
       6-207-XU R&L                      Locking assembly similar to 5-207-XU R&L, but supplied with shortened vertical lock button.

       Series 207™                       Automatic Unlocking Series (see CAUTION below)
       207-U R&L                         Patented locking assembly similar to 206-U R&L, but supplied with one horizontally mounted outside
                                         remote control lever.
       1-207-U R&L                       Locking assembly similar to 207-U R&L, but supplied with one vertically mounted inside remote control
                                         lever.
       2-207-U R&L                       Locking assembly similar to 207-U R&L, but with vertically mounted remote control lever.
       5-207-U R&L                       Locking assembly similar to 207-U R&L assembly, but with inside vertically attached non-locking handle.
       6-207-U R&L                       Locking assembly similar to 5-207-U R&L, but supplied with shortened vertical lock button.
       8-207-U R&L                       Locking assembly similar to 5-207-U R&L, but inside handle is attached in horizontal position and only
                                         rotates upward for passenger safety.

 CAUTION:
 CAUTION All series 206 and 207 have a built-in automatic unlocking feature to prevent lock out. When the latch engages the striker in the locked position, the striker disengages the latch-locking feature.
                           NOTE Each lock is serialized for lot control. Removal of serial number identification or tampering with the Safety Slam Lock unit voids the warranty.
                              TE:
                           NOTE




Safety Slam Lock Systems ----------------------------------------------------------
208X Series Safety Slam Latch
                           Locking/                                                                                                                                                        Cer tified
    Ser ies 208                              Si m i l a r t o :                              Descr iption/Featur es (See caution below)
                             N/L                                                                                                                                                          FMVSS 206

 208-XU R/L                 Locking             207-XU            Patented locking as s embly s upplied w/(2) remote control levers                                                             Ye s

 1-208-XU R/L                 N/L               208-XU            Similar to 208-XU R/L except non-locking                                                                                      No

                                                                    NOTE: All items depicted in this catalog are for reference only.
                                                                   NOTE: All items depicted in this catalog are for reference only.
                                                     CALIFORNIA | GEORGIA | INDIANA | MISSOURI | PENNSYLVANIA | TEXAS | WISCONSIN
                                                                            One Call, MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN 141
                                           CALIFORNIA • GEORGIA • IDAHO • INDIANA •Every Time 1.800.821.3520
                                                                                800-821-3520                                     29
                                                                                                           www.austinhardware.com

                                         Safety Slam Lock Systems                                                    www.austinhardware.com

                                                     Compartment Slam Latch ----------------------------------------------------------
                                                     No. 3-106-50
                                                     Designed specifically to fit compartment applications where durability and
                                                     smooth functional performance are required. Latch may be surface
                                                     mounted on the inside of door pannel or between outter and inner door
                                                     skins. Shown with optional No 16489 striker.
                           LOCKS LATCHES & CATCHES




                                                     THIS LOCK DOES NOT MEET FMVSS 206 REQUIREMENTS
                                                          LOCK      NOT

                                                     Strikers For 206 Series Lock Systems------------------------------------------------
                                                     No. EMC 16489                                                                     No. EMC 106-15 X PL
                                                     Striker                                                                           Headless striker
                                                                                                                                       Weight: .29 lb.
LOCKS, LATCHES & CATCHES




                                                     Three optional strikes are available in zinc aluminum material


                                                     No. EMC 1-106-15                                                                 No. EMC 2-106-15 PL
                                                     Headless striker, oblong slots                                                   Headless striker, round mounting holes.
                                                     Weight: .30 lb.                                                                  Weight: .31 lb.




                                                     No. EMC 206-15 X PL
                                                     Striker.




                                                                                                    NOTE: All items depicted in this catalog are for reference only.
                                                                                                    NOTE: All items depicted in this catalog are for reference only.
                           CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
142CALIFORNIA | GEORGIA | INDIANA | MISSOURI | PENNSYLVANIA 800-821-3520
                                                                | TEXAS | WISCONSIN
                                                                                      One Call, Every Time 1.800.821.3520
                            30
                                                  www.austinhardware.com
                                                          www.austinhardware.com
Safety Slam Lock Systems
 Safety Slam Lock Systems ----------------------------------------------------------
 No. HI 550-1
 Safety Slam Latch,
 Zamak #3 Material

 No. HI 550-1 TPD




                                                                                                                          LOCKS LATCHES & CATCHES
 Mounting holes tapped

 No. HI 550-1 SD
 Stand-off for HI 550 latch




                                                                                                                                               LOCKS, LATCHES & CATCHES
 No. HI 550
 Similar to 550-1 except in a smaller
 size, non-locking, 5/16” square
 hole, 4-15/16” L x 4-3/8” W x 3/
 4” Thick, with (4) 17/64” dia. holes,
 less striker




 No. HI 551-S                                                             No. HI 552-S
 Striker for use with HI 550-1 and                                        Striker
 HI 550-S safety slam latches, pow-
 der metal with Zinc yellow
 chromate finish




                                           NOTE: All items depicted in this catalog are for reference only.
                                           NOTE: All items depicted in this catalog are for reference only.
                                    CALIFORNIA | GEORGIA | INDIANA | MISSOURI | PENNSYLVANIA | TEXAS | WISCONSIN
                                                                One Call, Every Time • PENNSYLVANIA • TEXAS • WISCONSIN
                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI1.800.821.3520
                                                                                  800-821-3520                            31
                                                                                                                           143
                                                                           www.austinhardware.com

                           Safety Slam Lock Systems

                           No. 79-L                                                                  No. 550
                           “D” Ring




                           See page 134 for details.
LOCKS, LATCHES & CATCHES




                           No. 459 SPACER                                                            No. 550                           No. 459   No. 79L
                                                                                                     Lock                              Spacer    Handle




                           No. 551 S                                                                 No. 552 S
                           Striker                                                                   Striker




                                                                    NOTE: All items depicted in this catalog are for reference only.

                                                       CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
144                                                                                                         800-821-3520
                                                                                        www.austinhardware.com

                  Safety Slam Lock Systems                                                       www.austinhardware.com

                          Paddle Handle Latches, Mini, Single Point ----------------------------------------
                          Key-Locking
                          No. EMC 4860
                          3-1/2” L x 2” W
LOCKS LATCHES & CATCHES




                             Par t /Ver sion
                                                           Var iations               Finish
                                    No.
                                4860- 11               Standard s lide bolt     Nickel plated
                              4 8 6 0 SS - 1 0         Standard s lide botl     Stainles s s teel
                              5- 4860- 01             Hook type s lide bolt       Plain s teel
                              5- 4860- 11             Hook type s lide bolt     Nickel plated
                                                     Standard s lide bolt w/
                            1 1 - 4 8 6 0 P8 - 1 1                               Nickel plated
                                                       blind mtg. bracket
                                                                                Available Plain,
                                                     Hook type s lide botl w/
                                15- 4860                                           Nickel, &
                                                       blind mtg. bracket
                                                                                   Stainles s


                                                 Slide Bolt Variations




                                                                                                                                                     LOCKS, LATCHES & CATCHES
                                        Paddle Latch
                          No. 4859 Mini Paddle L atch
                          Non-locking latch designed
                          for small access panels. In-
                          stallation with mounting
                          screws or rivets.




                          No. AH L8900 PC W/H
                          Pre-coat finish, with holes.

                          Tool Box Lock for smaller boxes. Also can be used for any box
                          where the lid comes down and needs a hook type catch. Universal
                          Right or Left




                                                                                NOTE: All items depicted in this catalog are for reference only.
                                                                                NOTE: All items depicted in this catalog are for reference only.
                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                            | TEXAS | WISCONSIN
   CALIFORNIA | GEORGIA | INDIANA | MISSOURI | PENNSYLVANIA 800-821-3520                                                                             145
                                                                 One Call, Every Time 1.800.821.3520
 60
                                                                                    www.austinhardware.com

                           Safety Slam Lock Systems
                           Rotary Compartment Latch

                           No. 459 ZN
                           Rotary compartment latch designed for use with 79L SS "D" ring latch
                           (see page 3), 4-15/16˝ L x 5-5/8˝ W, 1-3/8˝ Thick, Zinc finish

                           No. 459 SS
                           Stainless steel


                           No. 459 SPEC E-1
                           Same as 459 Z
                           with threaded holes
                           and spacer attached
                           Designed for use with
                           Part No. 79 L SS HP

                           No. 459-ZC-4WN
                           Same as 459 Z with
                           (4) weld nuts
LOCKS, LATCHES & CATCHES




                           and Stainless steel levers




                           No. 459-15 ZN
                           Adjustable striker for 459-ZC, Zinc finish




                           No. 459 SPACER BLK
                           Black plastic spacer for 459 Z




                                                                            NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
146                                                                                                                 800-821-3520
                                                            www.austinhardware.com

Paddle Handle Latches, Mini, Single Point
Non Key-Locking
No. 4859
2-5/8˝ L x 2˝ W


Part / Version           Variations               Finish
     No.
  4859-01           Standard slide bolt         Plain steel
  4859-11           Standard slide bolt        Nickel plated
 4859SS-10          Standard slide bolt       Stainless steel
 5-4859-11          Hook type slide bolt       Nickel plated
5-4859SS-10         Hook type slide bolt      Stainless steel
                    Standard slide bolt w/       Available
  11-4859-P8          blind mtg. bracket      Plain, Nickel,
                                               & Stainless
                    Hook type slide bolt         Available
    15-4859         w/ blind mtg. bracket     Plain, Nickel,
                                               & Stainless




                                                                                                                        LOCKS, LATCHES & CATCHES
                  Slide Bolt Variations




Key-Locking
No. 4860
3-1/2˝ L x 2˝ W


    Part /              Variations              Finish
 Version No.
   4860-11    Standard slide bolt            Nickel plated
 4860SS-10    Standard slide bolt            Stainless steel
  5-4860-01  Hook type slide bolt              Plain steel
  5-4860-11  Hook type slide bolt            Nickel plated
                a        l e bol
11-4860P8-11 wStbnidard sgi.dbracktet
              / l nd mt                      Nickel plated

                   Hook type slide bolt        Available
   15-4860         w/ blind mtg. bracket     Plain, Nickel,
                                              & Stainless

                  Slide Bolt Variations




                                                    NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                147
                                                                                      www.austinhardware.com

                            Paddle Handle Latches, Mini, Single Point

                            No. L1883 S.S.                                                                      No. L1980 P.C.
                            Stainless steel paddle lock. For use on compartment doors,                          Pre-coat paddle is furnished less mounting holes for
                            tool boxes, or any door that needs the quality of stainless                         welding. The pre-coat finish is perfect for painting.
                            steel and slam action. Furnished with mounting holes.
 LOCKS, LATCHES & CATCHES




                            No. 1ML Mini-Locking                                                                No. 1M Mini-Non-Locking
                            The 1ML Mini and 1M Mini are stainless steel finish,
                            furnished with mounting holes, these paddles are ideal
                            on small doors and tool boxes.




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
148                                                                                                                    800-821-3520
                                                     www.austinhardware.com

Paddle Handle Latches, Mini, Single Point
No. L1883
No. L1980
Both have the same dimensions.




                                                                                                                        LOCKS, LATCHES & CATCHES
No. 1ML Mini




                                             NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                     800-821-3520                       149
                                                                                       www.austinhardware.com

                           Paddle Handle Latches, Mini, Single Point

                           No. 1-ML
                           (Key-Locking)
                           No. 1-MLN has inside release knob.
                           Finish: Zinc or Stainless Steel

                           No. G-4
                           Gasket
LOCKS, LATCHES & CATCHES




                           Flush-mounted mini-paddle handle. 30° bolt standard, 45° optional.
                           Available in zinc or stainless steel. Mounting holes standard on stainless steel.



                           No. 1-M
                           (Non-Locking)
                           No. 1-MN has inside release knob.
                           Finish: Zinc or Stainless Steel




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
150                                                                                                                     800-821-3520
                                                   www.austinhardware.com

Paddle Handle Latches, Junior, Single Point

Non Key-Locking
No. 4820
4-3/4˝ L x 3-3/4˝ W




                                                                                         4.75




                                                                                                                             .75     2.79        3.75




                                                                                                                                                                                           LOCKS, LATCHES & CATCHES
                                                                                         3.81

                                                                     SUGGESTED OUTLINE                         NOTCH IF NEEDED
                                                                        OF CUTOUT                          FOR CROSS PIN CLEARANCE



                                                                                                                                                        #18 GA. (.04) MFG. STD.




                                                                                                                             .81




                                                                                   1


                                                                                                                                        1                                   2.56
                                                                                                                            .44                                                     REF.
                                                                                                                     +.00
                                                                                                                     -.06   APPROX #13 SPRING LOAD                           2.85
                                                                                         3.56                 1.00                                                           2.70
                                                                                                                            AT .44 BOLT TRAVEL


                                                                          1

                                                                               SPRING RATE: 16.97 LBS/IN




                             All versions of 4820 series available Zinc plated and Stainless steel.
                      Some versions may be a                    . Consult customer service for availability.


Non Key-Locking
No. 4890
4-3/4˝ L x 3-3/4˝ W




                                                             No. 6-4890
                                                             Long Angle
                                                             Slam Bolt

                                           NOTE: All items depicted in this catalog are for reference only.

                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                                                                                    151
                                                                                                                    www.austinhardware.com

                           Paddle Handle Latches, Junior, Single Point
                           Key-Locking
                           No. 4821
                           4-3/4˝ L x 3-3/4˝ W

                            P art / Ve rsion               V a r i a ti o n s                 F in i s h
                                  N o.                                                                                                                          4.75                         NOTCH IF NEEDED FOR
                                                                                                                                                                                             CROSS PIN CLEARANCE
                                                                                                                                                  3.81
                               4 82 1-2 5             Standard version                    Zinc plated
                                                                                       A v a il a b le Z in c
                                  1 -48 21          W it h in s id e r e le a s e p la t e d & S t a i n le s s
                                                                                                                                                                                       .75

                                                   ( 4 ) 1 3 / 6 4 ˝ d ia . m t g .
                              3 -4 8 2 1 - 2 5        h o le s o n 3 ˝ x 3 -              Zinc plated                                                                                         2.79    3.75

                                                        5 /1 6 ˝ c e n t e r s                                       SUGGESTED OUTLINE

                                                   ( 4 ) 1 3 / 6 4 ˝ d ia . m t g .                                      OF CUTOUT


                           * 3 - 4 8 2 1 S S - 1 0 h o le s o n 3 ˝ x 3 -              S t a in l e s s s t e e l
                                                        5 /1 6 ˝ c e n t e r s
                                                                                                                                                                                                                           #18 (.04) MFG. STD. GA.
                                                   H a s lo n g a n g le s l a m A v a il a b le Z in c
                                  6 -48 21                       b olt              p la t e d & S t a i n le s s                                                                .81

                                                      A d a p te d fo r b lin d
                           1 1 - 4 8 2 1 S S U 1 0 m tg . s t a in le s s s t e e l    S t a in l e s s s t e e l
                                                                                                                                                                                                 .44 APPROX. BOLT TRAVEL
                                                                                                                                                                          +.00
                                                                                                                                                                          -.06                   14# SPRING LOAD AT                            2.56    REF.
                                                                                                                                                         3.56          1.00                      .44 BOLT TRAVEL                                2.85
                           * Several key number options available from stock.                                                                                                                                                                   2.70
LOCKS, LATCHES & CATCHES




                           All versions of 4821 series available Zinc plated and Stainless steel.
                           Some versions may be a                           Consult customer service for availability.



                           Non Key-Locking

                           No. N1883
                           4-3/4˝ L x 3-3/4˝ W, (4) mtg. holes,
                           30° bolt, Stainless steel

                           No. 1-M-ZC
                           Same as N1883 except with Zinc finish

                           No. G4
                           Gasket for N1883 and 1-M-ZC

                                                                                                                                                                                  Drawing and photo are shown with a 45˚ bolt.




                           Key-Locking
                           No. 4891
                           4-3/4˝ L x 3-3/4˝ W

                               Part /                    Variations                    Finish
                            Version No.
                              4891-25               Standard version                Zinc plated
                            1-4891X-25             With inside release              Zinc plated
                                                     (4) 13/64˝ dia.
                             2-4891-25                mtg. holes on                 Zinc plated
                                                  3" x 3-5/16˝ centers
                             6-4891-25            With long angle slam              Zinc plated
                                                           bolt
                                                     (4) 13/64˝ dia.                 Stainless
                            17-4891-SS                mtg. holes &                     steel
                                                      inside release
                                                                                                                                            Some versions may be a
                           No. 4901-25X-01                                                                                                  Consult customer service for details and availability.
                           Gasket for 4891 Series Paddle Latches                                                                            Other versions of 4890 and 4891 series available.

                                                                                                           NOTE: All items depicted in this catalog are for reference only.

                                                                                CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
152                                                                                                                                                800-821-3520
                                                             www.austinhardware.com

Paddle Handle Latches, Junior, Single Point

No. L1883
4-3/4˝ L x 33/4˝ W, (4) mtg. holes, 30° bolt, Stainless steel

No. 1MLN SS
Same as L1883 except w/ inside release

No. 1ML-ZN
Zinc finish w/ 45° bolt (No inside release)

No. G4
Black neoprene gasket for above part numbers




                                                                                                                        Drawing shown with a 45˚ bolt.


Paddle Handle Latches, Standard, Single Point




                                                                                                                                                         LOCKS, LATCHES & CATCHES
No. 4903
5-1/2˝ L x 41/4˝ W; Welded construction for heavy duty use

No. 4905
Same as 4903 series except with integral paddle handle and trigger for lighter duty use.




Standard finishes for 4901, 4903, 4904, and 4905 series are Zinc plated
and bright polished Stainless steel. Some versions may be Lead Time
Items. Consult customer service for
availability and other finish options.




No. 4901-25X
Gasket used with 4901, 4903, 4904, and 4905 Series Paddle Latches




                                                     NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                                                153
                                                                                   www.austinhardware.com

                           Paddle Handle Latches, Standard, Single Point

                           Key-Locking
                           No. 4901
                           5-1/2˝ L x 4-1/4˝ W, welded construction for
                           heavy duty use

                           No. 4904                                                                                                            Version No. 1-4901
                           Same as 4901 series except with integral                                                                            Key-Locking with
                           paddle handle and trigger for lighter duty use                                                                      Inside Release shown
LOCKS, LATCHES & CATCHES




                           No. 4901-25X
                           Gasket used with 4901, 4903, 4904, and 4905 Series Paddle Latches




                           Key-Locking
                           No. 4906
                           5-1/2˝ L x 4-1/4˝ W




                                                                            NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
154                                                                                                                 800-821-3520
                                                         www.austinhardware.com

Paddle Handle Latches, Standard, Single Point
Non Key-Locking
No. 4907
5-1/2˝ L x 4-1/4˝ W




No. 4901-25X
Other versions of 4906 and 4907 series available. Some versions may be Lead Time Items.
Consult customer service for availability.




                                                                                                                         LOCKS, LATCHES & CATCHES
Gasket used with 4906 Series Paddle Latches




Key-Locking
No. 1-ESL-SS
5-1/2˝ L x 4-1/4˝ W, 30° bolt, Stainless steel

No. 1-ES-SS
Same as 1-ESL-SS except Non Key-Locking and 45˚ bolt
Other Available Options




No. 4968-7-01
Cable, Plastic Covered, 1/16˝ diameter, 36˝ long, used with 1-ESLC-SS510

No. G10
Gasket




                                                 NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                         800-821-3520                    155
                                                                                      www.austinhardware.com

                           Paddle Handle Latches, Large, Single Point
                           No. L3885
                           Key-Locking
                           5-1/2˝ L x 4-1/4˝ W,
                           30° bolt, Stainless steel




                           No. N3885
                           Non-Locking
                           5-1/2˝ L x 4-1/4˝ W,
                           Stainless steel
LOCKS, LATCHES & CATCHES




                           No. 4960
                           6-17/32˝ L x 5-9/32˝ W




                           Non Key-Locking
                           No. 4961
                           Same as 4960 series except Non Key-Locking




                           Other versions of 4960 and 4961 series available.
                           Some versions may be Lead Time Items.
                           Consult customer service for availability.



                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
156                                                                                                                    800-821-3520
                                                            www.austinhardware.com

Paddle Handle Latches, Large, Single Point
No. 1ESC
This is a Black Powder Coat paddle latch. It has a cable eye for attaching
cable or small rod to link to a rotary latch. With the black powder coat
there is no need to paint. This is a non key-locking, it is also available
in key-locking.




                                                                                                                         LOCKS, LATCHES & CATCHES
Flush Locks
No. 2319-A
(Locking style available with rubber moisture protector.)
For compartments, light doors, utility, and all single-point
flush installations. Mounting studs available.
Finish: Zinc

No. 2319-B
(Non-Locking style.)




                                                    NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                 157
                                                                                      www.austinhardware.com

                           Flush Locks
                           Flush Lock
                           No. 2315-C
                           Designed for use on cranes, shovels, graders, dozers, and
                           other off-the-road equipment where outside flush mounting
                           is desirable and inside opening is required. Flush-mounted,
                           easily operated from the outside. Simple push-pull rod-type
                           inside handle. Available in plain or zinc finish.
LOCKS, LATCHES & CATCHES




                                                                                                                                                  Rear View




                           Sliding Door Lock
                           No. 2318-A
                           (With key lock)

                           Designed for flush installation. The outside handle and lock
                           mechanism fit entirely within the thickness of the sliding door.
                           The bolt and inside handle project beyond the door’s edge, thus
                           allowing the door to open completely. The Sliding Door Lock
                           latches the door in both the open and closed position.

                           Action is smooth and positive. Because it is flush mounting, the
                           Sliding Door Lock increases available load space--up to 16 cu. ft.
                           of extra load space without changing body size.

                           A foolproof manual bar lock is provided which effectively locks
                           the door from the inside. Front and rear strikers are drop-forged
                           and lock is fully assembled, ready for simple installation.
                           Handle only--specify right or left hand units.
                           Order strikers separately.
                           Finish: zinc


                           No. 2318AS LH
                           Also available with blind mount studs.


                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
158                                                                                                                    800-821-3520
                                   www.austinhardware.com

Flush Locks

No. 2318-18                                                  No. 2318-18
                                                             Rear Striker




                                                                                                      LOCKS, LATCHES & CATCHES
No. 2318-18A                                                 No. 2318-18A RH
                                                             Front Striker
                                                             LH opposite.




No. 2381A




                           NOTE: All items depicted in this catalog are for reference only.

               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                   800-821-3520                       159
                                                                                     www.austinhardware.com

                           Flush Locks
                           No. 1ESL WF
                           Stainless Steel
                           This paddle latch has wider flange than other paddles. This is for use on fiberglass doors or
                           any application where you need to have the mounting holes further in from edge of cut-out.


                           #G 1ESLWF
                           Gasket
LOCKS, LATCHES & CATCHES




                           Outside Dead Bolt                                                                   Inside Dead Bolt
                           No. 11707-05                                                                        No. 11706-05
                           (As viewed from outside)                                                            (As viewed from inside)




                                                                                                                Features and Benefits

                                                                                                                Built-in dead bolt eliminates the need for an add-on residential-type dead
                                                                                                                bolt, with new inside lock knob assembly allowing for easy operation.

                                                                                                                Requires the same cut-out detail as the standard latch assembly and the
                                                                                                                same fasteners can be used for all versions.

                                                                                                                Dead bolt locks into the fully extended position for true dead bolt func-
                                                                                                                tioning.

                                                                                                                Available with both key cylinders keyed alike which eliminates the need
                                                                                                                for separate keys, or with both key cylinders keyed different for increased
                                                                                                                security; master key available for paddle key cylinder only.



                           Locking Model with Night Lock                                                                          Optional Inside Flat Plate
                           No. 11522-05       No. 10953-05 No. 10953-05                                                           No. 11191-05
                           (As viewed from outside)   (Keyed Random)        (As viewed from inside)                               (As viewed from inside)




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
160                                                                                                                   800-821-3520
                                                                  www.austinhardware.com

Flush Locks
Designed for travel trailer entrance door applica-         Major components and strike plate (standard                       Door Edge Cover Plate
tions, all doors with thickness of 1-1/4” to 1-1/2”,       version) are SAE 903 die cast zinc alloy; strike
and universal applications either right or left hand-      plate on optional dead bolt version is steel.
                                                                                                                             No. 11213-15
ed. Available with optional built-in dead bolt in lock-    Finish on major components is copper-nickel-
ing or non-locking configurations. Locking model           chrome plated or color coordinated powder                         No. 81094-15
features a new 6-water lock plug with shuttered            coating; strike plate (standard version) has                      Mtg. screws only for door edge cover plate
automotive keyway and is supplied either keyed             black powder coating; and strike plate on
alike or keyed different, with or without night lock,      optional dead bolt version is zinc plated. Mtg.
and with optional inside flat plate for storage, bag-      screws for door thickness greater than 1-3/8”
gage or access doors. Six 8-32 UNC mounting                No. 81095-16; less than 1-3/8” No. 81096-16.
screws are supplied separately for installation.


                                                                                                                             Strike Plate Detail
                                                                                                                             (Dimensions shown for either standard or
No. 11522-05                                                                                                                 dead bolt version.)
Keyed alike with night lock.

No. 11407-05                                                No. 11706-05                                                     No. 11063-12 Black
                                                                                                                             Die cast strike plate for standard version.
Keyed alike without night lock.                             With Dead Bolt - Inside only




                                                                                                                                                                           LOCKS, LATCHES & CATCHES
No. 10500-05-E                                              No. 11707-05
Complete travel trailer latch.                              With Dead Bolt - Outside only
Includes inside cover plate, strike
plate, door edge cover, outside
housing, paddle, and screws; with
night lock.




                                                                                                                             No. 11705-15 Zinc
                                                                                                                             Stamped steel strike plate for
                                                                                                                             dead bolt version.




No. 11766-05-E                                              No. 10953-05
Complete travel trailer latch.                              Inside Only
Includes inside cover plate, strike
plate, door edge cover, outside
housing, paddle, and screws; with
dead bolt.




                                                          NOTE: All items depicted in this catalog are for reference only.

                                     CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                                  800-821-3520                                                             161
                                                                                         www.austinhardware.com

                           Travel Trailer Latches

                           60-250 Series with Built-in Dead Bolt
                           No. 11707-05
                           Same as 10500-05-E except with a built-in dead bolt which eliminates the
                           need for an add-on residential-type dead bolt. Dead bolt locks into the
                           fully extended position for true dead bolt functioning




                           60-200 Series
                           No. 10500-05-E
                           Designed for travel trailer entrance door applica-
                           tions; all doors with thickness of 1-1/4˝ to 1-1/2˝,
                           Key-locking, SAE 903 diecast zinc alloy with cop-
                           per-nickel-chrome plated finish
LOCKS, LATCHES & CATCHES




                           Options include non key-locking version and special color coordinated
                           powder coated finish. Consult customer service for availability

                           Paddle Latches, Multi-Point

                           No. 4901-60
                           Lock Cylinders for use with the following paddle handle series:
                           1-ESL, 1-ESLC, 2-1-ESL, and 2-1-ESLR. Key No. 510




                           Other key numbers may be available as Lead Time Items.
                           Consult customer service for details.

                           2-Point Paddle Handle Latches
                           (Paddle Handle Only)

                           No. 2-1-D-SS
                           Same as 2-1-ESLR-SS
                           except Non Key-Locking
                           and “Deep Dish” style

                           No. G10
                           Gasket for 2-1-ESL and
                           2-1-ESLR series parts




                           No. 15X849X9XN
                           Paddle handle latch, 2-point assembly, non key-locking,
                           wide flange with (4) 13/64˝ dia. mtg. holes, and reverse
                           lever arms with 1/4˝ dia. holes, stainless steel




                                                                                  NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
162                                                                                                                       800-821-3520
                                                      www.austinhardware.com

Recessed Push-Button Locks
No. 6000 R&L                                                                    Has a stylish push-button handle design, both inside and out, for smooth,
Designed for 3/4” thick panels.
                                                                                easy opening action, plus the security of an external key lock and an
                                                                                internal lock knob.
No. 1-6000 R&L
Designed for 1-1/16” thick panels.                                              Installation is fast and simple--four screws secure the inner and outer
                                                                                components, creating a weather-resistant latch. Constructed of ASA/PVC
                                                                                alloy for long-lasting durability and corrosion protection.




                                                                                                                                                            LOCKS, LATCHES & CATCHES
                                                                                                                 Inside View   Door edge


                    Outside View              Door edge




                                              NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                      800-821-3520                                                          163
                                                                                      www.austinhardware.com

                           Recessed Push-Button Locks

                           No. 11662-16
                           Non Padlocking

                           No. 11608-16
                           Same dimensions except padlocking
LOCKS, LATCHES & CATCHES




                           No. 11662-16                                                                         No. 11608-16
                           Key Lockable                                                                         Padlockable
                           This pivoting catch compartment latch is designed for off-highway
                           applications. Construction, Mining, Agricultural, Service Bodies,
                           and Utility Truck Bodies. It also can be used Storage, Compartment                   No. 11608-01 Black
                           and Access doors. This latch is available in key locking or padlockable.             Padlockable, Black
                           Finish: Zinc




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
164                                                                                                                    800-821-3520
                                          www.austinhardware.com

Recessed Push-Button Locks

No. N8800 SS 90                                                      No. L8800 SS 90
(No Rod Bushing)                                                     (No Rod Bushing)


No. N8800 SS 90 WRA                                                  No. L8800 SS 90 WRA
(with Rod Bushing)                                                   (with Rod Bushing)




                                                                                                             LOCKS, LATCHES & CATCHES




                                  NOTE: All items depicted in this catalog are for reference only.

                      CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                          800-821-3520                       165
                                                                                       www.austinhardware.com

                           Recessed Push-Button Locks
                           Non Key-Locking

                           No. N8800 SS 90
                           Cam parallel to outside tray, 4-3/8˝ L x 3-17/64˝ W, Stainless steel

                           No. N9804
                           Same as N8000 except with (4) .215˝ mounting holes, Stainless steel




                           No. 12268
                           Flat Hook,
                           4-23/64˝ L x 3-17/64˝ W,
                           (4) 3/16˝ dia. mtg. holes,
                           Stainless steel

                           No. 12269
LOCKS, LATCHES & CATCHES




                           Similar to 12268 except
                           Non Key-Locking




                           No. 3-3672 SS
                           New Stylized Latch Line
                           2-Point key-locking slam latch. Furnished with a double-bitted key cylinder.
                           Key cylinder is recessed for additional protection. Available carbon steel with
                           a zinc finish or polished stainless steel.




                           More options for the Stylized Latch Line include:
                           - Key-locking
                           - Non-locking
                           - Mounting Holes
                           - Blind Mount Studs
                           - Single Point (3601 Series)
                           - Rotary “T” Handle (3691 Series)

                           Consult with your Customer Service Representitive for more details.




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
166                                                                                                                     800-821-3520
                                                             www.austinhardware.com

Latches

No. 1-ERL
This rotary paddle is designed for compartment doors for Utility Bodies
Fire vehicles and any vehicle that has Outside compartment doors.
This paddle latch does NOT meet FMVSS 206 safety standard. This
lock should NOT be used on passenger doors or any door designed
to secure someone inside a vehicle, compartment or bucket on cranes.

No. 1-ERL W/TS
Has a weather seal in the trigger area of the pan.

No. 1-ER
Non-locking version

No. 1-ER W/TS
Available with a trigger seal by ordering

No. 1 ER SS
Non-key locking

No. 1 ERL SS
Key-Locking




                                                                                                                                       LOCKS, LATCHES & CATCHES
No 3900-20
Striker for 1 ER SS and 1 ERL SS

No. G10
Gasket for 1 ER SS and 1 ERL SS




Single Rotor Compartment Latch
With primary and secondary latching positions

No. 10330-09
Yellow chromate 35 chrome key-locking
Designed for on- or off-highway vehicles in construction, mining
and agricultural applications; service and utility truck doors; fire
and rescue unit vehicles; most storage, compartment and access
doors; with door weights of approximately 75 lbs. or less.


                                                                                                         No. 11414-09   No. 10330-09
                                                                                                         Padlockable    Key-Locking




                                                     NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                              167
                                                                                       www.austinhardware.com

                           Latches

                           No. 1ESP
                           Padlockable Slamming paddle latch. When using
                           combination locks, you never have to worry about
                           losing your keys to get into your equipment.

                           Finish: Available in stainless steel or precoat.
LOCKS, LATCHES & CATCHES




                           No. 89-4907                                                                            No. 88-4907
                           with Padlock Eye, 45° Bolt.                                                            with Padlock Eye, 30° Bolt.
                           (Standard Slide Bolt)                                                                  (Long Angle Slide Bolt)
                                                                                                                  This slam latch is identical in all dimen-
                                                                                                                  sions and functions to the No. 4907 non-
                                                                                                                  key-locking slam.




                              No.         Option                     Variations
                            89-4907      Padlockable       Available in carbon steel or
                                                           stainless steel
                            88-4907      Padlockable       With long-angle slide bolt
                            85-4907      Padlockable       Standard slide bolt and 4-11/64” dia.
                                                           mounting holes on 3-3/4” x 3-11/16”
                                                           centers
                            84-4907      Padlockable       Long-angle slide bolt and 4 standard
                                                           mounting holes

                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
168                                                                                                                     800-821-3520
                                                        www.austinhardware.com

Latches

No. 69ESL Stainless Steel
For Gasket Order #G69ESL 1/4” Thick
A double paddle kit, less rotarys.
For use on ambulance doors or any door where a double paddle system is desired.
To meet FMVSS 206, you must use No. 400 or No. 1-400 rotaries.




                                                                                                                      LOCKS, LATCHES & CATCHES




                                              All Component Parts Available Sold Separately
                                                NOTE: All items depicted in this catalog are for reference only.

                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                        800-821-3520                  169
                                                                                      www.austinhardware.com

                           Latches

                           No. 3900-A
                           Key-Locking

                           No. 3900-B
                           (non-key-locking) are designed for use on emergency vehicles, utility vehi-          Available options include mounting holes, mounting studs, along with an
                           cles, and construction equipment compartment doors. Features rotary                  internal override feature, which is operated by an inside handle attached to
                           latch engagement for more positive and secure locking than conventional              the tripping pawl. Strike pin No. 3900-20 upon request.
                           compartment locks, two-stage locking (primary and secondary safety posi-
                           tions), universal mounting, and slam action, even when the key is locked.            Finish available in either plain, zinc, chrome, black, or stainless steel.’
                           The support bracket and center latch totally encloses the strike pin and             NOTE: Does NOT meet FMVSS.
                           aides in door alignment.
LOCKS, LATCHES & CATCHES




                           Rotary Paddle Latches

                           Recessed Rotary Paddle Latch
                           No. 9600-U
                           Automotive styling and performance in an industrial rotary latch.

                           Rotary slamming action makes any door feel much more solid. Easily attaches
                           with two small nuts for lower installation costs. Features dual-key entry; automo-
                           tive-style key cylinder is standard. Matching 2-point locking (No. 9672-U) and
                           non-locking (No. 9673-U) versions are available. Single-point slam bolt and
                           remote latching models are also available with the same automotive styling for
                           enhancing the appearance of your application.

                           The receptacle is made of carbon steel and is zinc-plated then black powder top-
                           coated. Paddle is of 300 series stainless steel with brushed finish. Mounting
                           bracket and metal components are carbon steel and zinc-plated.




                           No. 9600-U
                           Key-locking Rotary




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
170                                                                                                                    800-821-3520
                                                            www.austinhardware.com

Rotary Paddle Latches

No. 9601-U
Non-key-locking Rotary




                                                                                                                         LOCKS, LATCHES & CATCHES
Key and Non Key-Locking versions available. 51/2˝ L x 41/4˝ W, incorporates
industry standard paddle latch configuration with positive latching features of our
2-stage rotary.

Series No. 4373-X
Key-Locking

No. 3-4373SSX-10
Key-Locking, with holes,
Stainless steel

Series No. 4374-X
Non Key-Locking




No. 16268-08
Rotary Paddle Latch, single point,
51/2˝ L x 41/2˝ W,
(4) 7/32˝ mtg. holes
on 4˝ x 2.9˝ centers,
Stainless steel

Note: Recommended striker
for 15621-05 is Part No.
10335-16 (see page 268
for details)

No. 81348
Gasket for 15621-05




                                                    NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                 171
                                                                                     www.austinhardware.com

                           Rotary Paddle Latch

                           No. 9600U-33
                           Rotary Paddle Latch, single point,
                           61/2˝ L x 37/8˝ W,
                           key-locking, black receptacle,
                           Stainless steel

                           Also available in non key-locking version

                           No. 1T-240-10-64
                           Striker
LOCKS, LATCHES & CATCHES




                           Also available in 2-point key-locking and non key-locking versions. Consult customer service.


                           No. 3-7901-SS-10
                           Rotary Paddle Latch, single point, 5-1/2˝ L x 4-1/2˝ W, (4) 11/64˝ mtg. holes on 3-3/4˝ x 3-11/16˝
                           centers, 2-stage design provides positive horizontal, vertical latching, Stainless steel

                           No. 3-7900-23
                           Non Locking, Plain Steel
                           with Black E-Coat

                           No. GST-0040
                           Gasket for 3-7901 Series




                           Note: Recommended striker for Part No. 3-7901-SS-10 is Part No. 240-52U-25
                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
172                                                                                                                   800-821-3520
                                                      www.austinhardware.com

Rotary Paddle Latch
No. 9672-U
2-point key-locking




No. 9700-U
Key-locking/Slide-bolt version




                                                                                                                         LOCKS, LATCHES & CATCHES
Paddle Handle Latch, Cable Actuating

No. 249SS-10
Non Key-Locking
5-1/2˝ L x 4-1/4˝ W, square
radius corners, Stainless steel


No. 250SS-10
Same as 249SS-10 except Key-Locking
Zinc Finish Also Available



No. 2-4901-25
Gasket




                                              NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                      800-821-3520                       173
                                                                                       www.austinhardware.com

                           Paddle Latches, Multi-Point

                           2-Point Assemblies
                           2-Point paddle latch assemblies, 5-1/2˝ L x 4-1/4˝ W
                           Kits include paddle handle (center control), rods or cables, and end bolts
LOCKS, LATCHES & CATCHES




                           Other versions and finishes may be available. Consult customer service.
                           All versions of 4975-P9 and 3-4975-P9 are




                           Rod Version Shown




                           No. 25-4974-SS51-510
                           Paddle latch kit similar to 3-4974SSU-10 except low-profile with spring-loaded lever and paddle,
                           and is set up for rod or cable control remote actuation, stainless steel, keyed CH510

                           Also available in non key-locking. Consult customer service for availability.

                           No. 2-4901-25
                           Gasket for 4972, 4973, 4974, & 4975 Series Paddle Latches




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
174                                                                                                                     800-821-3520
                                                           www.austinhardware.com

Paddle Latches, Multi-Point

Component Parts for 4972, 4973, 4974, and 4975 Series Paddle Latch Kits




                                                                                                                        LOCKS, LATCHES & CATCHES
Horizontal Idler Pulleys with Cable Guards

No. 4968L-55-25
Left Hand

No. 4968R-55-25
Right Hand




2-Point Paddle Handle Latches
(Paddle Handle Only)

No. 21ESLR-50 SS
Key-Locking, 5-1/2˝ L x 4-1/4˝ W, (4) 3/16˝ dia. mtg. holes,
with return spring, Stainless steel
(Several different key numbers available)

No. 21ESL-50 SS
Key-Locking, 5-1/2˝ L x 4-1/4˝ W, (4) 3/16˝ dia. mtg. holes,
Stainless steel
Also available Zinc finish

No. 21ESLR-50 SS 265
Same as 21ESLR-50 SS except with 17/64˝ dia. mtg. holes

No. 21ESR-50 SS
Non-keylocking paddle handle, (4).198˝ mtg. holes, with return spring, stainless steel



                        All parts also available in carbon steel with zinc finish. Consult customer service.
                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                 175
                                                                                      www.austinhardware.com

                            Paddle Latches, Multi-Point

                            No. 6-2630
                            Nested paddle handle kit for use on vehicle personnel doors where back
                            to back mounting is desirable. Rotary latches and linkages are available
                            upon request.

                            Finishes: Stainless Steel, Zinc, and Powder Coat
 LOCKS, LATCHES & CATCHES




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
176                                                                                                                    800-821-3520
                                                       www.austinhardware.com

Paddle Latches, Multi-Point

No. 1-5974-U
The direct connected assembly
eliminates the need for a rod or
cable linkage between the paddles.

Fits between as little as a 2-21/32”
space. System can be locked or
unlocked from either the outside or
the inside with tamper-resistant
blind mounting on outside.

Black-textured powder coat finish
is standard. Optional stainless steel
polish available.




                                                                                                                          LOCKS, LATCHES & CATCHES




                                               NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                       800-821-3520                       177
                                                                                            www.austinhardware.com

                           Paddle Handle Recessed Door Locks
                           Paddle Handle Recessed Door Locks
                           No. 25-4974-51 SS        No. 34-4974-51 SS                                                  No. 37-4972-51 SS RH                  No. 42-4972-50 SS RH
                           Available in black                                                                          (Shown)                               Available in black. Comes with
                                                                                                                                                             standard 4901-51 lock cylinder
                                                                                                                                                             (not shown)




                           These locks are supplied in polished stainless steel with mounting holes.                  These locks are supplied in polished stainless steel with mounting holes.
                           These systems are for use on emergency vehicles, or any door that needs a                  Supplied left or right handed. These systems are for use on emergency vehi-
                           positive lock system. They can be used with many different rotary latches.                 cles, or any door that needs a positive lock system. They can be used with
LOCKS, LATCHES & CATCHES




                                                                                                                      many different rotary latches. Right hand locks shown.




                                                     No. 34-4974-51 SS                                                                            No. 13-4972-51 SS RH




                                                     No. 25-4975-51 SS                                                                           No. 42-4972-50 SS RH

                           Specifications                                      Above locks are supplied right or left hand; right hand shown, and are available in black.
                           Length of receptacle ....................5-1/2”
                           Width of receptacle ......................4-1/4”
                           Hole centers..........................3.75 x 3.69   NOTE:
                                                                               13-4972-50 SS R&L (not shown) same as 42-4972-50 SS R&L
                           Suggested cut-out ................4.62 x 3.38
                                                                               except uses No. 522 cyl. w/4972-6 cam quarter turn lock.
                           Dia. of mounting holes .......17 - 4 holes
                           Gasket #G-10

                                                                                     NOTE: All items depicted in this catalog are for reference only.

                                                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
178                                                                                                                          800-821-3520
                                                            www.austinhardware.com

Latch Systems
2-Point Spring-Loaded Dead Bolt Squeeze Latch




No. 560                                                                              No. 561
This unique light-duty 2-point squeeze dead bolt latch is intended for               Slam Action Strike
use on light-weight compartment or cabinet doors. It incorporates a                  This strike allows any latching
zinc center case (available textured or non-textured), 5/16” aluminum                mechanism using 5/16” diameter
rods, and stamped steel guide brackets and strike points.                            rods which normally operate as
                                                                                     dead bolts to function as a
The latch is readily activated with a simple two-finger squeeze. This                slam/dead bolt.
retracts the end bolts from the strikes (whether the ones shown, or a




                                                                                                                        LOCKS, LATCHES & CATCHES
slam-type strike, such as that illustrated).

The center case is easily attached by means of a steel mounting
bracket using two self tapping screws.

Available in black or chrome finish. Weight: 3 lbs. 4 oz.




No. 560-54
is the part number for the rod guides.




No. 560-61-P5
Lock Cylinder Kit




                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                 179
                                                                                     www.austinhardware.com

                           Latch Systems
                           No. 21M-50
                           Non-Locking Center Case Only
                           Gaskets #G-4

                           Mini-paddle handle with slam-action and single flap (center
                           control only). Zinc or stainless steel. Mounting holes stan-
                           dard on stainless steel. For locking version, specify



                           No. 21ML-50
                           Center Case Only. Complete Lock on facing page.




                           No. 4972
LOCKS, LATCHES & CATCHES




                                                                   No.           Option                    Variations                  Weight
                                                                   4972          Key-locking               Rod control                 3 lbs. 1 oz.
                                                                   3-4972        Same as 4972              With 4 11/64” dia.          3 lbs. 1 oz.
                                                                                                           mounting holes--
                                                                                                           on 3-11/16” x 3-3/4”
                                                                                                           centers
                                                                   4973          Non-key-locking           Rod control                 2   lbs. 13 oz.
                                                                   3-4973        Same as 4973              Mounting holes              2   lbs. 13 oz.
                                                                   4974          Key-locking               Cable control               2   lbs. 8 oz.
                                                                   3-4974        Same as 4974              Mounting holes              2   lbs. 8 oz.
                                                                   4975          Non-key-locking           Cable control               2   lbs. 5 oz.
                                                                   3-4975        Same as 4975              Mounting holes              2   lbs. 5 oz.
                                                                   565698-5      Cable




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
180                                                                                                                   800-821-3520
                                                              www.austinhardware.com

Latch Systems
Flush-Mounted
This smooth acting, slam-type latch is intended for use on all types of                 This simple, inexpensive unit is normally supplied with rods which
compartment doors on farm equipment enclosures, stationary equipment                    connect to the end bolts. However, it can be adapted for use with
and machine tool cabinets. The recessed pan permits flush installation:                 cable to provide greater flexibility in application.
simply cut an appropriate hole and attach by screws, bolts or welding.                  All versions available in 300 Series non-corrosive stainless steel.
This latch is especially suited for installation in tight quarters because the          Finishes available are zinc, stainless steel. For gasket order #G-10.
overall thickness is only 1-9/16”.

#G-4                                                                                    No. 4972                                No. 4974
Gaskets




Paddle Handle
No. 2-1 ML




                                                                                                                                                                      LOCKS, LATCHES & CATCHES
No. 2-1M
Key-locking 2-point mini-paddle handle with slam-action and single flap.
Available in zinc or stainless steel. Mounting holes standard on stainless
steel. For non-locking version, specify                                                 No. 4972 and No. 4974 (the key-         No. 3-4972, No. 3-4973, No. 3-
                                                                                        locking versions) are furnished with    4974, and No. 3-4975 same as
If you desire cable instead of rods, you can order:
                                                                                        one key. Uses key cylinder No.          above, except with four 11/16” dia.
No. 2-1MLC                                                                              4901-51. No. 4973 and No. 4975          mounting holes in center case on 3-
key-locking                                                                             are the non-key-locking versions,       11/16” x 3-3/4” centers.
                                                                                        respectively.
No. 2-1MC
Non-locking



                                                      NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                              800-821-3520                                                            181
                                                                            www.austinhardware.com

                           Latch Systems
                           Paddle Handle                                                              Paddle Handle
                           No. 2-1-DR                                                                 No. 2-1-D
                           (With rods and rod guides)                                                 (With rods and bolts)
LOCKS, LATCHES & CATCHES




                                                                     NOTE: All items depicted in this catalog are for reference only.

                                                        CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
182                                                                                                          800-821-3520
                                                             www.austinhardware.com

Latch Systems
No. 2-1-DLR
(Key-Locking)

#G-10
Gasket




                                                                                  2-1-DR
                                                                                  (Non-Locking)




                                                                                                                                                              LOCKS, LATCHES & CATCHES
Dead-Bolt Latches
Single-flap, flat cup flush-mounting handle. Mounting holes optional.                  Rod Guides--Sturdy rod guides easily installed. Heavy duty all-steel
Two-point non-locking with rods and rod guides. Heavy duty 3/8” rods,                  construction. Unique spring action helps prevent rattle and play.
36” long standard. Available with 48” long rods. Sturdy anti-rattle steel              #G-10
guides. Available zinc finish or stainless steel.                                      Gasket



Slam Latches                                                                 No. 2-1-D                                  No. 2-1-DL
Single flap flat cup flush-mounting handle. Mounting holes                   (Non-locking)                              (Key-Locking)
optional. Two point non-locking with rods and bolts. Heavy
duty 3/8” rods, 36” long standard, up to 48” long. Available
zinc finish or stainless steel. Trouble-free operation with flush
bolts standard. Offset bolts available.

#G-10
Gasket




                              Bolts--Rugged, all-steel construction. Easily
                               installed; four mounting holes for each bolt
                                case. Available both flush or offset; in any
                                combination. Slam-and-take-up bolts (not
                                          shown) available on special order.




                                                     NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                                                     183
                                                                                     www.austinhardware.com

                           Latch Systems
                           Paddle Handle
                           No. 2-1-DLC
                           Locking two-point, single flap, flat bottom pan.
LOCKS, LATCHES & CATCHES




                                                                                                           No. 21ESLR-50




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
184                                                                                                                   800-821-3520
                                                              www.austinhardware.com

Latch Systems
Paddle Handle                                                                           Paddle Handle
No. 2-1-DC                                                                              No. 2-1-DLC
#G-10                                                                                   #G-10
Gaskets                                                                                 Gaskets

Single-flap, flat-cup flush-mounting                                                    Same basic specifications as
handle. Mounting holes optional.                                                        No. 2-1-DC, except with integral
Two-point non-locking with cable                                                        key tumbler lock. One key
and bolts. Flush and/or offset bolts                                                    furnished. Specify zinc finish or
in any combination.                                                                     stainless steel.

Finest quality, easily adjusted heavy
duty cable, 30” long standard.
Available in zinc finish or stainless
steel.




                                                                                                                              LOCKS, LATCHES & CATCHES
Cable
Finest pre-stretched aircraft quality. Easily adjusted with carefree
operation. Rugged enough for any heavy-duty application.


No. 2-1-DLC-50                                                                          No. 21ESLR
Back shown                                                                              This Slam Lock is sold with (2)
                                                                                        rods, (1) center paddle, and (2)
                                                                                        spring loaded slamming bolts.
                                                                                        Also comes with (1) key and lock
                                                                                        cylinder. Finish: Zinc or Stainless
                                                                                        Steel.

                                                                                        #G-10
                                                                                        Gasket




                                                      NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                              800-821-3520                    185
                                                                                     www.austinhardware.com

                           Latch Systems
                           No. 3-6903-50
                           Flush mounted “T” handle, water resistant construction.
                           Fits in same cut-out as many of our paddle handle latches.
                           Can be used as a single point or a three point as shown in
                           drawings below. Available in non-locking (3-6904)
                           Finish: Zinc or Stainless Steel.

                           Single point application shown
LOCKS, LATCHES & CATCHES




                           No. 3-6903
                           Three point application shown




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
186                                                                                                                   800-821-3520
                                                             www.austinhardware.com

Latch Systems
Non Key-Locking
No. 2-8000SSR-10
Flush folding "T" latch,
4-3/4˝ L x 3-3/4˝ W, RH,
non key-locking with
(4) 11/64˝ dia. mtg. holes
on 3-3/16˝ x 3˝ centers,
Stainless steel




Also available in Left Hand version.


Adjustable Latching Cam
No. AH 5559 ZN
2-3/4˝ L with 5/16˝ square hole




                                                                                                                          LOCKS, LATCHES & CATCHES
Note: This part can also be used
with any handle that has a 5/16˝
square shank.




Flush Folding “T” Latches, Single Point

8400 Series Key-Locking Folding T-Handle
Flush folding "T" latch, 4-3/4˝ L x 4-7/8˝ W, clockwise rotation,
adjustable cam, key-locking with (4) 13/64˝ dia. mtg. holes
on 3-5/16˝ x 3-7/8˝ centers

Z-bracket riveted to the T-handle receptacle rather than welded
(riveting rather than welding of Z-bracket improves strength and
security and eliminates burn marks in the receptacle)

Water resistant O-ring design limits water penetration into
the compartment area

Bright Stainless Steel
(also available in carbon steel)

Keyed CH502 or CH545
(other key numbers and
styles also available)



No. 13-8400-SSR-10-CH502
Keyed CH502

No. 13-8400-SSR-10-CH545
Keyed CH545




Consult customer service for availability of special options.
Note: Stock versions do not include cylinder cover shown.
                                                     NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                 187
                                                                                     www.austinhardware.com

                           Flush Folding “T” Latches, Single Point
                           8004 Series Key-Locking Flush Mounted Drop-T Handle
                           Similar to 8400 series (see page 187) except with welded Z-bracket, less O-ring.
                           Adjustable cam, zinc finish. Also available in stainless steel.
LOCKS, LATCHES & CATCHES




                           No. 4872-25
                           Non Key-Locking, 4-3/4˝ L x 3-3/4˝ W, fixed cam, Zinc finish


                           No. 4-4872SS-10
                           Same as 4872-25 except with (4) 11/64˝ dia. mtg. holes on 3-3/16˝ x 3˝ centers, Stainless steel




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
188                                                                                                                   800-821-3520
                                                           www.austinhardware.com

Flush Folding “T” Latches, Single Point
Dead-Bolt Latch, Non Key-Locking
No. 8002A-25
4-3/4˝ L x 3-3/4˝ W, adjustable cam, Zinc finish
Also available without adjustable cam




                                                                                                                        LOCKS, LATCHES & CATCHES
Non Key-Locking
No. 8000R-25
With adjustable cam, Right Hand, Zinc finish

No. 8000L-25
Left Hand, Zinc finish


No. 2-8000SSR-10
Same as 8000R-25 except with (4) 11/64˝ dia.
mtg. holes on 3-3/16˝ x 3˝ centers and
Stainless steel. Right Hand.
Also available in Left Hand




                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                 189
                                                                                     www.austinhardware.com

                           Locks
                           Non-Key-Locking
                           No. 6-8000
                           Non-key-locking; continuously spring adjustable. Other versions available; consult customer service.
LOCKS, LATCHES & CATCHES




                           Key-Locking
                           No. 4-8004




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
190                                                                                                                   800-821-3520
                                                             www.austinhardware.com

Locks
Non-Key-Locking
No. 6-8000
Available in zinc or stainless steel, 5/8” radius.


Adjustable latch takes up slack as seal wears or collapses with age, and
allows greater freedom in manufacturing tolerances since the pawl and
strike relation is not critical. Gasketed models are for severe moisture or
dust conditions and reduce electrolysis when mounted to aluminum
skins. These latches are ideal for Fiberglass doors which cannot accept
slam locks. This locks in open or closed position and use key cylinder
No. 15621 (with one key furnished).

Offset latches available upon request and mounting holes or
blind mounting provided to customer specifications.




                                                                                                                          LOCKS, LATCHES & CATCHES
Key-Locking
No. 4-8004

No. 4-8004 R
Standard key-locking carbon steel.
Has continuous spring adjustment.
Zinc-plated finish.

No. 4-8004-SS R
Bright polished stainless steel.
Comes with mounting holes.

#G-8004
Gasket




                                                     NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                 191
                                                                                       www.austinhardware.com

                           Locks
                           Key-locking T-Handle
                           No. 9002
                           Key-locking T-handle with standard 12-hole V-grooved cam. Single-
                           point lock with adjustable latch for diverse door thickness. Off-center
                           shank permits mounting the T-handle close to the edge of the door.
                           Ideal for use on steel, wood and fiberglass doors. Models with gaskets
                           are available for severe moisture or dust conditions. T-handles can be
                           provided with mounting holes, welded studs, or without holes for easy
                           installation. Available in zinc or polished stainless steel. Other options
                           shown below--codes for ordering:

                           S - studs                           E - E clip
                           H - holes                           F - flat cam
                           W - water resistant                 B - offset cam, V-ground
                           D - dust cap                        N - no key cylinder hole
                           T - adjustment spring               SS prefix for stainless steel.

                           Example: SS 9002-HWD is a stainless steel 9002 T-handle with stan-
                           dard hole pattern, dust cap and water resistant options.
LOCKS, LATCHES & CATCHES




                           No. 9002T ZN RH
                           Spring adjustable




                           Key-locking T-Handle
                           No. 9006
                           Key-locking T-handle, two point lock. Off-center shank permits
                           mounting the T-handle close to the edge of the door. Ideal for use
                           on steel, wood and fiberglass doors. Models with gaskets are
                           available for severe moisture or dust conditions. T-handles can be
                           provided with mounting holes, welded studs, or without holes for
                           easy installation. Available in zinc or polished stainless steel. Other
                           options shown below--codes for ordering:

                           S - studs
                           H - holes
                           W - water resistant
                           D - dust cap




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
192                                                                                                                     800-821-3520
                                                               www.austinhardware.com

Locks
401-S
Non-Locking Type
1 pt. Non-locking
Available left or right handed (right hand standard)

401-L
For large cup, order




                                                                                                                          No. 401-L Right hand




                                                                                                                                                 LOCKS, LATCHES & CATCHES
No. 2601-S Left Hand
Key-locking version of 601-S.

No. 2701
Same as 2601, but features lock nut for cam adjustment.
Right hand standard; left hand available; in zinc or stainless
steel (mounting holes standard on stainless steel).




                                                       NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                               800-821-3520                                      193
                                                                                     www.austinhardware.com

                           Locks
                           Single Point Adjustable “T” Handle
                           For compartment doors requiring dead bolt action. Recessed pan per-
                           mits flush installation. May be attached by screws, bolts or welding in a
                           simple cutout. Shanks are offset for mounting lock close to edge of door.




                           No. 2711S
                           with studs
                           Folding handles with concealed stainless steel
                           springs hold handles in folded position.

                           NOTE: Locking shown. Available in non-locking
                           versions with 5-sided and rectangular trays.
LOCKS, LATCHES & CATCHES




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
194                                                                                                                   800-821-3520
                                                              www.austinhardware.com

Locks

No. 2402S-50
Folding “T”handle, can be supplied 1 point, 2 point, or 3 point. When
ordering 2 or 3 point, 2 rods and 2 rod guides will be furnished.
Note: The drawing is of a 2 point “T” handle without rods or rod guides.

Finish: Stainless Steel




                                                                                                                                      LOCKS, LATCHES & CATCHES
                                        (Rear View)



No. 3403-L-50
This folding “T” handle has a different design than most “T” handles.
The lock cylinder is in the pan. This will make it easier for you to cut out
your steel or fiberglass. Also available Non-Locking.

Material: Stainless steel or Precoated steel




           Left Hand Pictured


                                                                                                             Right Hand Illustrated




                                                      NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                              800-821-3520                            195
                                                                          www.austinhardware.com

                           Latches

                           No. 403-L
                           RH w/o mtg. holes
                           Zinc-plated




                           No. 403-S
                           Folding T-Assy (RH) (ZN)
                           Zinc-plated
LOCKS, LATCHES & CATCHES




                           No. 402-S
                           Folding T-Assy (ZN)
                           Zinc-plated




                           No. 2701
                           SS NS Folding T
                           Chrome-plated handle




                                                                   NOTE: All items depicted in this catalog are for reference only.

                                                      CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
196                                                                                                        800-821-3520
                                                     www.austinhardware.com

Locks
Flush-Mounted • Circular Pan • Drop D-Handle
No. 8001-XU
(with offset cam)




No. 8001-55U                                                                   No. 2-8001-53
Includes (2) 6-32 machine screws.                                              (straight cam)




                                                                                                                        LOCKS, LATCHES & CATCHES
No. 8001-50X                                                                   No. 8001-55U
Recessed pan and handle only;                                                  Adapter plate and screws for
bracket, nuts and washer shown                                                 installing handle, Recommended
not included.                                                                  for all applications except welding.




                                             NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                     800-821-3520                       197
                                                                                      www.austinhardware.com

                           Locks

                           -Flush-Mounted
                           -Circular Pan
                           -Drop D Handle

                           No. 8001-X
                           Without bracket and screws
                           Weight: .30 lb.

                                                                                                                                                              No. 8001-53
                           No. 8001-XU                                                                                                                        Offset Cam
                           With bracket and screws
                           Weight: .62 lb.

                                                                                                                                       No. 8001-15
                                                                                                                                       Adapter Plate
                           This versatile, recessed drop-handle latch is
                           available in a variety of finishes and latching
                           options. Of special interest is the adjustable                 No. 8001-16
                           grip ranges of the cam: from 7/8” to 1”.                       6-32 machine screw
LOCKS, LATCHES & CATCHES




                                                                                                                                                              No. 2-8001-53
                           The basic latch incorporates a chrome steel,                                                                                        straight cam only
                           recessed pan with a drop-handle and crossbar
                           cast onto a threaded, stainless steel shank.
                           Either a straight or offset cam can be provided.
                           Another version incorporates an adapter plate
                           and screws for mounting.

                           Finally, the latch can be converted into a multi-
                           point system: three-point with the addition of
                           two rods and related brackets, or two-point
                           with modification of the center pawl.                                                                                              No. 2-8001-X
                                                                                                                                                              Without bracket and screws,
                           Finishes are chrome-plated pan and handle                                                                                          With straight cam.
                           with zinc-plated cams.

                                                                                                                                      No. 2-8001-XU
                                                                                                                                      With bracket, screws and straight cam.




                                                                                                                           No. 4-8001-X
                                                                                                                           Three point system
                           No. 8001-50X
                           Recessed pan and handle only.
                           No cam. Weight: .28 lb.




                           No. 8001-55U
                           Adapter plate and screws for
                           installation of handle. Available
                           zinc-plated. Weight: .14 lb.




                                                                                                                                                       No. 5-8001-X
                                                                                                                                                       Two point system
                           Other options available.


                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
198                                                                                                                    800-821-3520
                                                                                  www.austinhardware.com

Flush Folding “T” Latches, Single Point

Key Locking
No. 4874-25                                                                     3.25

                                                                                                                             SUGGESTED OUTLINE

For use with any                                                      KEY CYLINDER
                                                                       ROTATION                 4881-19
                                                                                                                                OF CUTOUT
                                                                                                                                                        .56 R.


latch mechanism having a 5/16˝                                                                     15621                                                         4874-50




square hole to accept handle




                                                                         XXXX
shank, Zinc finish                                                                                                                                                            .87




Also available in Stainless steel                     2.38



                                         2.72                                                                      .31 SQ.                                                   2.25




                                                      .98




                                                                                                          .13
                                                .64                                                                                                                        TYP.

                                                               1.74                                         1.34                                 3.00                  .38 R.


                                                       .64                      3.47      .77


                                                                                4.75




Non Key-Locking
No. 5630A-25
Also available in Chrome finish
with mtg. holes




                                                                                                                                                                                    LOCKS, LATCHES & CATCHES
Flush Folding “T” Latches, Multi-Point

No. 4857-82X-25
Kits include center control, rods,
and rod guides. 2-Point, Non Key-Locking, Zinc finish

No. 15-4857SSU10
Same as 4857-82X-25 except with (4) 11/64˝ dia. mtg.
holes on 3-3/4˝ x 3˝ centers, Stainless steel

No. 4871-82X-25
3-Point, Non Key-Locking, Zinc finish




                                                             NOTE: All items depicted in this catalog are for reference only.

                                    CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                                                   800-821-3520                                                     199
                                                                                   www.austinhardware.com

                           Flush Folding “T” Latches, Multi-Point

                           No. 4875-82X
                           3-Point, Key-Locking, Zinc finish
                           Also available Stainless steel

                           No. 4876-82X
                           2-Point, Key-Locking, Zinc finish

                           No. 16-4876-SSU-10
                           Same as 4876-82X-25 except with
                           (4) 11/64˝ dia. mtg. holes on
                           33/4˝ x 3˝ centers, Stainless steel
LOCKS, LATCHES & CATCHES




                           Consult customer service for other available options.


                           Lock Cylinders for use with Folding “T” Latches
                           No. 15621-CH501 through 15621-CH545
                           Some key numbers may be Lead Time Items.
                           Consult customer service for availability.
                           No. 15621 Keyed CH501 – CH545




                           Slam Latches, Multi-Point

                           2-Point
                           No. 6011-S
                           Center control only,
                           6-5/16˝ L x 2-1/2˝ W,
                           5/16˝ square hole,
                           1/4˝ stud dia., Zinc finish




                                                                            NOTE: All items depicted in this catalog are for reference only.

                                                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
200                                                                                                                 800-821-3520
                                                            www.austinhardware.com

Slam Latches, Multi-Point

2-Point Tapered
Rod actuated, 45° tapered slide bolt with 25 Lb. spring, for use on light panel doors, Zinc finish

No. 565694 ZN LH
Left Hand

No. 565694 ZN RH
Right Hand




Also available with 30° tapered slide bolt


45° Tapered Slide Bolt Only
No. 565694-55 ZN
7 Lb. spring and cable clamp
Left and Right Hand rods,




                                                                                                                         LOCKS, LATCHES & CATCHES
and 25 Lb. spring end bolts also sold separately




Consult customer service for availability.


2-Point
No. 565698 ZN RH FO
Rod actuated, flush upper bolt, 9/16˝ offset lower bolt, Right Hand, Zinc finish

Same as 565698 ZN RH FO except both bolts are flush
No. 565698 ZN RH F
Right Hand

No. 565698 ZN LH F
Left Hand




                                                    NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                 201
                                                                                      www.austinhardware.com

                           Slam Latches, Multi-Point
                           2-Point
                           Cable actuated, flush upper and lower bolt, Right Hand, Zinc finish

                           No. 565698X-P8 ZN L LH
                           Left Hand

                           No. 565698-P8 ZN R RH
                           Right Hand
LOCKS, LATCHES & CATCHES




                           Other options of 565694 and 565698 series slam latches are available. Consult customer service for details.


                           2500 Series, 3-Point
                           Roller Latch Assembly, 16 gauge steel channel, 1-1/4˝ nylon rollers, accepts any handle with a 5/16˝ square shank,
                           complete with rods, rod guides, center latch and shoulder bolts

                           No. 2500U ZN
                           (2) 36˝ rods, complete assembly

                           No. 1-2500U ZN
                           (2) 48˝ rods, complete assembly

                           No. 2500-2 ZN
                           Rod Guides Only

                           No. 2500-4 ZN
                           Shoulder Bolts Only

                           No. 2500-50 ZN
                           36˝ Rod Only

                           No. 1-2500-50 ZN
                           48˝ Rod Only




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
202                                                                                                                    800-821-3520
                                                            www.austinhardware.com

Multi-Point Roller Latch Assembly

No. 2500-1 Adjustable
Same as No. 2500-1, but has a hub for 5/16” handle shaft and includes a set screw.




No. 6-2500-1
Universal center cam can be used for right or left hand applications.




                                                                                                                         LOCKS, LATCHES & CATCHES
No. 2500-1
Standard Center Latch Only

No. 3-2500-51
Optional Center Latch with adjustable nylon pawl




Adjustable Rod Guide
No. 2500-2-7
Adjustable rod guide available




                                                    NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                 203
                                                                                       www.austinhardware.com

                           Dead Bolt Latches

                           2-Point
                           No. 105-50 ZN
                           Dead Bolt Center Control, 6-1/4˝ L x 2-1/2˝ W, 5/16˝ square hole, 5/16˝ stud dia., Zinc finish
                           2-point center control, stamped steel, 1/4” studs available.

                           No. 105-50 ZN SPEC
                           Also available with die cast cam. Consult customer service for availability.
                           Same as 105-ZC except with override feature with 1/4” studs.



                           3-Point
                           No. 107-50 ZN
                           3-point center control, stamped steel, accepts 5/16˝ shank,
                           uses 1/4˝ studs, zinc finish

                           No. 107-50 ZN SPEC
                           3-point center control, stamped steel, accepts 5/16˝ shank,
                           uses 1/4˝ studs, with override feature, zinc finish

                           No. 107-DC-ZC
LOCKS, LATCHES & CATCHES




                           3-point center control, die cast cam construction, accepts 5/16˝ shank,
                           uses 5/16˝ studs, zinc finish




                           Hardware Kit consisting of (2) each washers and cotter pins sold separately

                           No. ALH COTTER KIT 5/16
                           For 5/16” studs.

                           No. ALH COTTER KIT 1/4
                           For 1/4” studs.




                           3-Point
                           Dead Bolt Latch Assembly, for use with handles having a 5/16˝ square shank, Zinc finish.
                           Designed for lightweight metal or wood doors.

                           No. 5611-82XL-25
                           Left Hand

                           No. 5611-82XR-25
                           Right Hand




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
204                                                                                                                     800-821-3520
                                                            www.austinhardware.com

Dead Bolt Latches

2-Point
No. 3-384
Dead Bolt Latch with round 36˝ rods, 5/16˝ square hole and 5/16˝ dia. pins, Zinc finish

No. 3-384-48
Same as 3-384 except with 48˝ rods




                                                                                                                                      LOCKS, LATCHES & CATCHES
No. 5613                                                                              No. 5613X-P8
Right hand shown.
Weight: 4 lbs., 12 oz. (2154.6 grams)




No. 5613
(Right hand shown)                                                                    Specifications
Slam action lock for drop and swing doors, especially                                 Long rods ..............1/8” x 1/2” x 26-1/2”
designed for use on thin metal doors of utility service                               Bolt cases ..............3-3/8” x 2” x 5/8”
trucks, gasoline trucks, etc.                                                         Center case ............3-3/8” x 2” x 15/32”
                                                                                      Weight: 2-5/16 oz.
                                                                                      Finish: Zinc

No. 5613X-P8 R&L
Same as above but with No. 565698-5
cable (two 3 foot lengths) instead of rod.
Weight: 1.13 lbs.




                                                    NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                              205
                                                                                     www.austinhardware.com

                           Dead Bolt Latches

                           No. 114
                           For single side or rear door. Complete with standard 3/8” dia.                      Available with override feature, allowing a person to open the door from
                           rods 36” long. Die-formed bushing in center mechanism.                              the inside, even if the door is locked on the outside. Correct inside han-
                           Standard with flush bolts. This lock will spring back to the                        dle is No. 105-6 ordered separately. Available with 48” rods. Zinc finish.
                           closed position when the handle is released.                                        Weight: 4-3/4 lbs.
LOCKS, LATCHES & CATCHES




                           NOTES:




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
206                                                                                                                   800-821-3520
                                                           www.austinhardware.com

Latches

No. 2389-RH
Two Point Center Case.
Spring loaded center case used in conjunction with a 5/16” shank han-
dle - two point trip arm for multi-point applications. Complete systems
can be developed to customer specifications. Also available in lefthand.

Supporting Hardware: Flat or round rods with lengths to meet specific
dimensional requirements, rod guides, end boxes, and rotary latches.
Standard finish: zinc




                                                                                                                        LOCKS, LATCHES & CATCHES
No. 3-2389
Two Point Latch.
Spring loaded center case with 5/16” diameter rods. Rod lengths and
offsets as shown below. Lengths of rods and offsets can be quoted to
customer specifications based on quantity.




                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                 207
                                                         www.austinhardware.com

                           Latches

                           No. 94       No. 124                                    Quick slamming, wide adaptability, easy installation and durability are
                                                                                   prominent features of slamming locks. They’re widely used on panel
                                                                                   body doors, tool box doors, spare tire compartment doors, double or sin-
                                                                                   gle doors.

                                                                                   Flush or offset, they are quickly attached with four screws for each of the
                                                                                   striker bolt cases and four screws for the center case.



                                                                                   No. 94
                                                                                   For single side or rear door. Complete with standard rods 36” long.
                                                                                   Finish: Zinc and Stainless Steel
                                                                                   Bolts available with reverse taper, if desired.

                                                                                   No. 94C Cable Lock
                                                                                   is the same lock, but cable is used instead of rods.
                                                                                   Finish: Zinc or Stainless Steel

                                                                                   No. 124
                                                                                   For side or rear door. Complete with standard rods 36” long.
LOCKS, LATCHES & CATCHES




                                                                                   Flush or offset bolts, as specified. Zinc finish.




                                                                                                            IF YOU DON’T SEE IT IN OUR
                                                                                                           CATALOG FEEL FREE TO CALL.

                                                                                                                 WE HAVE A LARGE
                                                                                                              INVENTORY OF LOCKS IN
                                                                                                            ZINC AND STAINLESS STEEL.




                                                  NOTE: All items depicted in this catalog are for reference only.

                                     CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
208                                                                                       800-821-3520
                                                 www.austinhardware.com

Latches

No. 124
Standard: Both bolts flush




                                                                                                                                            LOCKS, LATCHES & CATCHES
                                                                                                            Weight: 3 lbs. (1504.1 grams)



No. 94 Flush




                                         NOTE: All items depicted in this catalog are for reference only.

                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                 800-821-3520                                               209
                                                                                      www.austinhardware.com

                           Latches

                           No. 5612
                           Die-case center with two steel rods attached. 5/16” square hole with set screw.
                           Standard with 48” rods.
                           Finish: Zinc




                           No. 5612ADJ
                           Has die-cast cam, with set screw. With steel 36” rods, yellow zinc finish.
                           And uses nylon rod guides. Center accepts a 5/16” square shank.



                                                                      For easy adjustment die-cast cam with set screws.
LOCKS, LATCHES & CATCHES




                           NOTES:




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
210                                                                                                                    800-821-3520
                                                          www.austinhardware.com

Latches

No. 5659
3 POINT LOCK
The center cam on this three point lock extends 1” from edge
of center case back plate.




                                                                                                                        LOCKS, LATCHES & CATCHES
No. 5659                                                                            No. 5658
3 POINT LOCK                                                                        2 POINT LOCK
These two rod locks come withflat
rods and tapered end bolts. This
style is better when using weather-
strip on your doors. The tapered
end bolts help bring the door snug
against the weatherstrip, with a
simple turn of the handle.
Finish: Zinc




                                                  NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                          800-821-3520                  211
                                                                                           www.austinhardware.com

                           Dead Bolt Latches

                           Available components for 5646 series dead bolt latch (All have Zinc finish)




                           No. 5647-25
                           Same as 5646-2XX-25 except 3-point

                           No. 5647-50-25
                           Center case only, Malleable Iron tumbler

                           No. 5647-50XU-25
LOCKS, LATCHES & CATCHES




                           Center case only, Zinc-Aluminum tumbler




                           3-Point
                           No. 5659-X82X-25
                           Dead Bolt Latch with 5/16˝ square hole,
                           flat rods and tapered take-up slide bolts, Zinc finish

                           No. 5658-25
                           Same as 5659-X82X-25 except 2-point




                                                                                                                                                       Close-up view of
                                                                                                                                                           end bolts




                                                                                    NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
212                                                                                                                         800-821-3520
                                                          www.austinhardware.com

Dead Bolt Latches
Three-Point Door Lock
No. 108
Three-point door lock similar to No. 107
except rods attached to two tapered bolts.

Standard one flush and one offset but will
furnish both flush or offset on request.

Weight: 5-1/4 lbs.
Finish: Zinc.




                                                                                                                              LOCKS, LATCHES & CATCHES




                                  Available with override feature allowing a person to open the door from the inside,
                           even if the door is locked on the outside. Correct inside handle, No. 105-6, ordered separately.
                                                  NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                          800-821-3520                        213
                                                                                     www.austinhardware.com

                           Dead Bolt Latches

                           Two-Point Door Lock
                           No. 110
                           This 2-point door lock has standard
                           3/8” dia. 36” rods. Long tapered
                           bolts take up slack and play, prevent
                           accidental opening.

                           Center mechanism 2-1/2” wide, 6-
                           1/4” long. Bolts standard top flush,
                           bottom offset, but will furnish both
                           flush or offset on request.

                           Weight: 4-3/4 lbs.
                           Finish: Zinc.
LOCKS, LATCHES & CATCHES




                                                              Available with override feature allowing a person to open the door from the inside,
                                                       even if the door is locked on the outside. Correct inside handle, No. 105-6, ordered separately.
                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
214                                                                                                                   800-821-3520
                                                           www.austinhardware.com

Dead Bolt Latches

No. 7011-S
-Heavy duty 3-point dead bolt lock with inside safety
release and in side handle for rear or side doors
-Reversible for use on RH or LH doors
-Features a tapered center bolt for a positive cam latch
at center position
-Composed of steel with ductile iron bolts
-Supplied with center case, top and bottom end bolts
and housings, (1) 36˝ steel rod and (1) 48˝ steel rod
with steel inside handle
-For use with outside handle having a 5/8˝ square shank
-Zinc finish




                                                                                                                        LOCKS, LATCHES & CATCHES
2-Point
No. 5646-2XX-25
Dead Bolt Latch with round rod plus rubber anti-rattle grommets in the rod guides, Zinc finish



No. 5646-X2XX-25
Same as 5646-2XX-25 except with Zinc-Aluminum alloy tumbler in center case, where cost and weight are a consideration




                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                 215
                                                               www.austinhardware.com

                           Dead Bolt Latches

                           No. 311
LOCKS, LATCHES & CATCHES




                           No. 311AH SL




                                                        NOTE: All items depicted in this catalog are for reference only.

                                           CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
216                                                                                             800-821-3520
                                    www.austinhardware.com

Dead Bolt Latches

                                                              No. 311
                                                              The safest lock yet designed, it locks from the outside with cylinder or
                                                              padlock but can always be unlocked from inside.

                                                              This lock has a special insert mechanism which allows inside handle (fur-
                                                              nished with lock assembly) to override outer handle even if locked. Flat
                                                              rods are standard; furnished complete with inside handle; standard with
                                                              1/2” square hole.

                                                              BIGGER....EXTRA RUGGED

                                                              For large vans, trailers and other heavy duty equipment, each lock is built
                                                              to withstand toughest constant use. With safety lock, there are not
                                                              screws to loosen or parts to push out. You just turn inside handle!

                                                              Special lock mechanism is engineered to permit ready exit at any time
                                                              even if outer handle is locked or jammed. Furnished with one 36” rod
                                                              and one 48” rod as standard.

                                                              No. 311 AH SL
                                                              lock supplied with two 48” round rods and is spring-loaded.




                                                                                                                                            LOCKS, LATCHES & CATCHES
                                                              See drawing on preceding page.

                                                              No. 311 ZN Spec.
                                                              comes with (2) 48” rods

                                                              No. 311 ZN 5/8
                                                              comes with a 5/8” square hole for the handle shaft.




                                                              Door Lock Kit
                                                              No. 311-B
                                                              Same as No. 311-A except kit includes bolts, 1/2” round rods and inside
                                                              handle, two steel end bolts and bolt cases.
                                                              Available with flat rods and slotted end bolts. Furnished in zinc finish.




                                                              311-B comes with round rods like 311-A, but is supplied
                                                              with end bolts and bolt cases instead of rod guides.

                            NOTE: All items depicted in this catalog are for reference only.

                CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                    800-821-3520                                                            217
                                                                                     www.austinhardware.com

                           Dead Bolt Latches
                           3-Point
                           No. 311-A
                           Heavy duty 3-point lock kit with override and round rods for use with handles with a 1/2˝ square shank. Kit
                           includes (1) center control with override, (1) 36˝ round rod, (1) 48˝ round rod, (2) rod guides, (1) washer
                           kit, (1) inside handle, and (1) anti-rattle spring
LOCKS, LATCHES & CATCHES




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
218                                                                                                                   800-821-3520
                                                       www.austinhardware.com

Dead Bolt Latches

3-Point
No. 5624U-25
Heavy Duty Dead Bolt Latch Kit with
5/8˝ square hole, flat rods and slide bolts,
Zinc finish




                                                                                                                          LOCKS, LATCHES & CATCHES
No. 5624-50-25
Center case only, Zinc finish

Heavy duty padlocking
handles in Chrome and
Zinc finishes are available
for use with 5624U-25.
Handle Part No.’s

5624-52-04
(Chrome)

5624-52-25
(Zinc)




Single Point
No. 7011-C
Dead Bolt Latch, steel case with
malleable iron bolt, 5/8˝ square hole,
Zinc finish




                                               NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                       800-821-3520                       219
                                                                                     www.austinhardware.com

                           Dead Bolt Latches

                           No. 612
                           Zinc finish is standard with steel construction and on rubber-coated handle
                           assembly and on handle keeper assembly.

                           Comes with three upper and lower steel brackets, two cams, two universal
                           keepers (pipe not furnished), and shoulder bolt, bushing, flat washer and
                           lock nut.




                           No. 611
                           Narrow keepers
LOCKS, LATCHES & CATCHES




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
220                                                                                                                   800-821-3520
                                                                     www.austinhardware.com

Dead Bolt Latches

Holdtite Door Lock Assemblies
Holdtite door locks may be used on single doors, double doors, or end
gates. They are ideal for refrigerated or van bodies and are reversible
for RH or LH doors.

NOTE: Standard lock assemblies supplied with
      long lugs and adjustable handle.

Holdtite Door Lock Assemblies
  Part                                       Descri pti on
 Number
   172        2-point assembly complete with 5/8˝ square rod, zinc finish
  172-0              2-point assembly less 5/8˝ square rod, zinc finish
   173        3-point assembly complete with 5/8˝ square rod, zinc finish
  173-0              3-point assembly less 5/8˝ square rod, zinc finish
All parts are ductile iron with zinc plating and gray powder coat.
Consult customer service for availability of stainless steel Holdtite door lock kits.


Holdtite Door Lock




                                                                                                                                 LOCKS, LATCHES & CATCHES
Component Parts List
  Part Number                   Description
     5628-58                 Handle, Regular
   15-5628-58              Handle, Adjustable
      5626-2                       Keeper
      5628-6                  Handle Keeper
      15139                      Short Lug
      15788                      Long Lug
      5626-1                    Pivot Guide
     5626-4L           Pivot Bracket, Top Center
     5626-4R           Pivot Bracket, Bottom Center
      5626-3                    Center Lug
   20-5628-54            Gravity Handle Keeper
     5628-51                  Safety Release
      15279             Bearing Bracket, Center
      5626-7          5/8" Square Rod, 90" Long
All parts are ductile iron with zinc plating and gray
powder coat. Consult customer service for availability of
stainless steel door lock components.




                                                             NOTE: All items depicted in this catalog are for reference only.

                                          CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                                     800-821-3520                221
                                                                                     www.austinhardware.com

                           Dead Bolt Latches
                           No. 614
                           Light Duty Bar Lock
                           Cast Cam/Keeper solid construction of cast malleable iron.
                           Compact Cam/Keeper Design low profile keeper with 1.5” max
                           protrusion compact cam extension of 1 inch.
                           Single Piece Locking Hasp the “flip” swivel is integral to the
                           hasp assembly for mounting ease.
                           Nylon Lower Bearing Brackets each mounting bracket has
                           a nylon non-corrosive base to ease bar lock rotation, the nylon
                           prevents bar lock seizure and acts as an electrolysis barrier
                           on the door skin.
                           Square Mounting Holes 3/8” secure carriage bolt mounting
                           makes a tamper-proof assembly.
                           Finish: zinc
LOCKS, LATCHES & CATCHES




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
222                                                                                                                   800-821-3520
                                                           www.austinhardware.com

Dead Bolt Latches

Heavy Duty Cam Action Door Locks
For flush to 3/4˝ offset, RH or LH doors using standard 3/4˝ pipe (not included)
Handle has permanently affixed vinyl grip and is riveted, not bolted, to lug for maximum security
Features Universal 1-15/16˝ wide keepers for side or rear door application
Maximum extension from body is 1-3/4˝
All mounting holes for 3/8˝ bolts
Lugs and keepers are made from ductile iron and are hot dip galvanized
Handle, hasp, and pipe retainers are manufactured from steel and zinc plated

No. 258-001
Same as 258-001 except with narrow 1-1/4˝ wide keepers

No. 258-002
Component parts for 258-001 and 258-002 also available as Lead Time Items.




                                                                                                                        LOCKS, LATCHES & CATCHES




                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                 223
                                                                                      www.austinhardware.com

                           Dead Bolt Latches

                           Cam Type Lock
                           No. 158                                                                                                      Part Number           Description
                           A popular cam type lock with narrow keepers which allow minimum extension
                                                                                                                                           158-202           Keeper, Top
                           from body. Modern all steel fabricated handle and hasp allow the body builder
                           to simply weld handle lug to pipe, eliminating cutting of pipe. Keepers and lugs                                158-203         Keeper, Bottom
                           composed of ductile iron, all remaining parts fabricated of high quality steel.                                 158-206           Lug, Bottom
                           Supplied less 3/4˝ pipe. Also available in stainless steel.
                           Consult customer service.                                                                                       158-207             Lug, Top
                                                                                                                                           158-209        Pipe Retainer, Top
                                                                                                                                           158-210      Pipe Retainer, Bottom
                                                                                                                                           158-100        Handle Assembly
                                                                                                                                           158-102               Hasp
                                                                                                                                        All parts are Lead Time Items
LOCKS, LATCHES & CATCHES




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
224                                                                                                                    800-821-3520
                                                          www.austinhardware.com

Dead Bolt Latches

Heavy Duty Cam Action Side Door Lock
No. 257
All steel lock allows entire length of pipe to cam over
to secure doors. Handle has permanently affixed viny grip and is
riveted, not bolted to handle lug for added security
Bushing assembly supplied with non-removable pin
for maximum security. All parts have zinc plated finish
Supplied less 3/4˝ pipe

No. 257R
Also available with removable pin




                                                                                                                           LOCKS, LATCHES & CATCHES




                                                  NOTE: All items depicted in this catalog are for reference only.

                                    CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                          800-821-3520                     225
                                                                                       www.austinhardware.com

                           Dead Bolt Latches

                           Economy Cam Action Side Door Lock
                           No. 157
                           All steel lock allows entire length of pipe to cam over to secure
                           door. Handle has permanently affixed vinyl grip and is riveted,
                           not bolted to handle lug for added security. Bushing assembly
                           supplied with non-removable pin for maximum security. All
                           parts have zinc plated finish. Supplied less 3/4˝ pipe.
                           Both parts also available in stainless steel.
                           Consult customer service.

                           No. 157R
                           Also available with removable pin
LOCKS, LATCHES & CATCHES




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
226                                                                                                                     800-821-3520
                                                         www.austinhardware.com

Dead Bolt Latches
Complete Locking System
No. 1969 ZN

 Part Number            Description
  1969-2X-25               Cam
  1969-1-25           Keeper (Flush)
  1969-8-25           Bearing Cover
  1969-9X-25            Back Plate
  1969-10-25            Pipe Strap
  1969-11-25            Back Plate
  5622-16-25               Bolt
  5625-17-25                Nut
  1969-39-25             Bushing
  1969-7X-25             Seal Pin
  1969-4X-25             Seal Eye
  1969-6X-25              Handle




                                                                                                                                                            LOCKS, LATCHES & CATCHES
  1969-5-25             Handle Clip




Designed for container, piggyback and
trailer use to meet the severe service
demands this equipment encounters.
Also ideal on van doors (as a single
lock), on refrigerated units and similar
applications.
Easy to install, permits use of "stan-
dard" O.D. structural tubing without
costly and time-consuming fitting on
the job. Total projection of lock is less
than 2˝. Cam and keeper design, com-
bined with bearing covers and back                                      Features:
plates, add structural strength to the
entire unit.                                                            • Wedge-type, anti-rack cams and keepers
                                                                        • Saddle-type construction of the cam insures a secure weld and
Standard finish:                                                          eliminates grinding and other on-the-job fitting.
Hot-dipped galvanized                                                   • Rack control in every direction
                                                                        • Patented "finger-hook" design
                                                                        • Steel cam and keeper locks assembly tight under extreme conditions
                                                                        • Over-the-seal or door-edge bearing back plate construction
                                                                        • Flush-mount construction
                                                                        • Frost-breaking action
                                                                        • Handle shipped loose and provided with a truss head screw and
                                                                          nut for easy installation
                                                                        • For piggyback and container applications, a 36˝ reinforcing rod
                                                                          can be ordered welded into the lower half of rod for additional
                                                                          end load shift protection
                                                                        • Anti-rack rings may be installed below each bearing cover
                                                                          to increase strength and prevent vertical motion during racking
                                                                        Can be furnished with or without tubing. When ordering the lock with tubing, give
                                                                        dimensions from center of upper cam to center of lower cam ("A" dimension),
                                                                        and from center of handle to center of lower cam ("C" dimension). Lock will be
                                                                        furnished with cams and handle clip welded. Also available with top cam loose.
                                                                        When ordering the lock with top cam loose, give dimensions from top of each
                                                                        end (overall length "B" dimension). When ordering without tubing,
                                                                        specify Part No. 1969-P24.

                                                 NOTE: All items depicted in this catalog are for reference only.

                                     CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                         800-821-3520                                                       227
                                                                                        www.austinhardware.com

                           Dead Bolt Latches
                           7500 Series Two- or Three-Point Cam Locking System


                            Part Number           Description
                                                    e l
                             7502-1-25 Stamped 5S8t˝ eH Keeper,
                                                2/
                                                        e
                             7503-1-25 3rd Point Stam/p˝ dHSteel
                                           Keeper, 25 8
                           2-5654-1-L25 Malleable Iro4n Keeper,
                                             LH, 11/ ˝ H
                                                      n
                           2-5654-1-R25 Malleable Iro4˝ Keeper,
                                             RH, 11/ H
                             5654-1-25  Malleable Iron Keeper,
                                             RH, 17/8˝ H
                             5650-6-25      Stamped Steel
                                              Rod Guide
                             5650-7-25   Stamped Steel Back
                                         Plate for Rod Guide
LOCKS, LATCHES & CATCHES




                             7502-5-25          Spacer Sleeve
                             7502-2-25           Rod Bracket
                             7502-3-25        Bracket Back Plate
                            5622-16-25                Bolt
                            5625-17-25                Nut
                            1969-39-25             Bushing
                            1969-7X-25             Seal Pin
                            1969-4X-25             Seal Eye
                            1969-6X-25              Handle
                             1969-5-25            Handle Clip




                                                                                                                                                             Two-Point diagram shown here,
                                                                                                                                                    Three-Point diagram shown on next page.

                           This anti-rack cam lock has been designed for all
                           van bodies, trailers, refrigerated equipment and
                           all types of gasketed doors. It will also allow the
                           greatest flexibility of application. The user has a
                           choice of stamped-steel or malleable iron keep-
                           ers of varying widths, a third-point steel keeper,
                           stamped-steel offset or straight rod guides and
                           supplementary bearing covers and back plates.                                                  Features:
                           Thus, the 7500 series can be adapted for every-
                           thing from medium-duty applications to the                                                     • Anti-rack cams and keepers
                           most severe service demands. Any model of the                                                  • Saddle-type construction of the cam insures a secure
                           7500 can be shipped completely welded to your                                                    weld and permits use of any standard 3/4˝ tube,
                           specifications, saving time and money. It can be                                                 eliminating grinding and other on-the-job fitting
                           furnished with the top cam loose if you have                                                   • Rack-control in every direction
                           more than one length requirement.                                                              • Flush-mount construction
                                                                                                                          • Frost-breaking action
                                                                                                                          When ordering, give dimensions from center of upper cam to cen-
                                                                                                                          ter of lower cam ("A" dimension), and from center of handle to cen-
                                                                                                                          ter of lower cam ("C" dimension). If ordering with top cam loose,
                                                                                                                          supply overall length ("B" dimension). Lock will be furnished with
                                                                                                                          cams and handle clip welded. Specify left- or right-hand applica-
                                                                                                                          tion. Consult customer service for available finishes.

                                                                                 NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
228                                                                                                                      800-821-3520
                                                      www.austinhardware.com

Dead Bolt Latches
No. 7502-U                                       No. 7503-U                                                      No. 7504-U
Standard 7502-U                                  Standard 7503-U                                                 Standard 7502-U
Two-point with stamped steel keepers             Three-point with stamped steel keepers                          Two-point straight rod guides.
and offset rod guides.                           and offset rod guides.

No. 1-7502-U                                     No. 1-7503-U                                                    No. 1-7504-U
1-1/4” narrow head and sill; two-point with      1-1/4” narrow head or sill. Three-point with                    1-1/4” narrow head or sill. Two-point
2-5654-1 keepers and offset rod guides.          2-5654-1 top and bottom keepers and 7503-1                      with 2-5654-1 keepers and straight rod
                                                 third-point keeper and offset rod guides.                       guides.


No. 2-7502-U                                     No. 2-7503-U                                                    No. 2-7504-U
1-7/8” head and sill; two-point with             1-7/8” head and sill. Three-point with                          1-7/8” head and sill. Two-point with 2-
5654-1 keepers and offset rod guides.            5654-1 top and bottom keepers and 7503-1                        5654-1 keepers and straight rod
                                                 third-point keepers and offset rod guides.                      guides.




                                                                                                                                                           LOCKS, LATCHES & CATCHES
               No. 7505-U                                             No. 7506-U                                                No. 7507-U
               1/4” narrow header, three-                             Side door; two-point with 7503-1                          Side door; three-point
               point with 2-5654-1 top                                keepers and offset rod guides.                            with 7503-1 keepers
               keeper, 7503-1 third-point,                                                                                      and offset rod guides.
               and 7502-1 bottom keeper
               and offset rod guides.




               No. 1-7505-U
               5654-1 bottom keeper.




                                              NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                      800-821-3520                                                         229
                                                                      www.austinhardware.com

                           Dead Bolt Latches
                           7500 Series Two- or Three-Point Cam Locking System (cont’d)




                                                                                                                                      Stamped Steel Keeper
                                                                                                                                          2-5/8˝ High
                                                                                                                                          No. 7502-1




                                                                                                                                       Malleable Iron Keeper
                                                                                                                                  Right- or Left-Hand, Right-Hand
                                                                                                                                               Shown
                                                                                                                                             1-1/4˝ High
                                                                                                                                        No. 2-5654-1
LOCKS, LATCHES & CATCHES




                                                                                                                                       Malleable Iron Keeper
                                                                                                                                            1-7/8˝ High
                                                                                                                                          No. 5654-1




                                                                                                                                    Third-Point, Stamped Steel
                                                                                                                                              Keeper
                                                                                                                                           2-5/8˝ High
                                                                                                                                          No. 7503-1




                                                                                                                                         Stamped Steel
                                                                                                                                        Offset Rod Guides
                                                                                                                                     No. 7502-2/7502-3

                                              Three-Point diagram shown here.


                                                                                                                                           Stamped Steel
                                                                                                                                        Straight Rod Guides
                                                                                                                                     No. 5650-6/5650-7



                                                               NOTE: All items depicted in this catalog are for reference only.

                                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
230                                                                                                    800-821-3520
                                                           www.austinhardware.com

Dead Bolt Latches
Aluminum Bar Locks
No. 615
An all-aluminum cam lock for truck body and trailer
doors. The aluminum cam lock provides a no rust
finish and has an anti-rack cam/keeper design to
provide a structural connection between header and
sill. The model 615 aluminum cam lock is a unique
combination of materials and design. Use with 3/4”
schedule pipe.

Features include:
- Aluminum Die Cast/Stampings
- Anti Rack cam/keeper design
- Stamped steel brackets and handle
- Stainless steel hasp assembly




                                                                                                                                    LOCKS, LATCHES & CATCHES
Stainless Steel Recessed Bar Locks
No. 992989
Kit consists of the following:
(1) Latch pan and handle, 304 stainless steel, with (4) pins, cylinder with (2) keys (#G3194), and spring
(2) Rod guide supports, 304 stainless steel (2) Cams, 304 stainless Note: Stainless steel rod not included.




No. 02090369A
Recessed latch with vinyl grab handle (less rod)




Also sold separately, cams and keepers:

No. 021603109                                                                        No. 021610820 RH
Universal Cam                                                                        Keeper, RH


                                                                                     No. 021610821 LH
                                                                                     Keeper, LH
                                                                                                                      LH Pictured


                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                             231
                                                                                   www.austinhardware.com

                           Dead Bolt Latches
                           Stainless Steel Bar Lock
                           No. 406.0
                           Stainless steel door locking mechanism with guide plate
                           70mm and antirack locking cam and keeper (small version).
                           Supplied without tube and customs seal cover.
                           Weight: 4360 grams.




                                                                                                                                               No. 400.3
                                                                                                                                               (2) LH/RH Keeper


                                                                                                                                               No. 400.1
                                                                                                                                               (1) RH Cam


                                                                                                                                               No. 357.0
                                                                                                                                               (1) SS Tube 0
                                                                                                                  No. 345.0                    27 x 2.5 x 2550
LOCKS, LATCHES & CATCHES




                                                                                                                  (2) Guide Plate
                                                                                                                  70mm




                                                                                                                                               No. 348.0
                                                                                                                 No. 347.0                     (2) Ring
                                                                                                                 (1) Rod Guide                 No. 349.0
                                                                                                                 40mm                          (2) Rubber Cover

                                                                                                                            No. 354.0          No. 350.1
                                                                                                                            (1) Lever          (1) Lever Mount
                                                                                                                            Retainer
                                                                                                                            Assembly
                                                                                                                                                    No. 355.0
                                                                                                                                                    (2) SS Pins 0
                                                                                                                                                    6 x 37

                                                                                                                                               No. 350.2
                                                                                                                                               (1) Rivet
                                                                                                                                               w/Washer

                                                                                                                 No. 352.1
                                                                                                                 (1) Lever 30 x 8

                                                                                                                                               No. 400.2
                                                                                                                                               (1) LH Cam

                                                                                                                                               No. 408.0
                                                                                                                                               (1) Hexag. Bolt
                                                                                                                                               M 10


                                                                                                                                               Used as buffer




                                                                            NOTE: All items depicted in this catalog are for reference only.

                                                          CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
232                                                                                                                 800-821-3520
                                                         www.austinhardware.com

Dead Bolt Latches
Stainless Steel Bar Lock
No. FCC 023110926 SS
Stainless steel door locking mechanism 0 22 with guide plate 85mm and antirack locking cam and keeper.
Supplied without tube and customs seal cover.
Weight: 3193 grams.
Pipe No. 412.0

                                                                                                                Parts Sold Separately

                                                                                                                                        No. 413.3
                                                                                                                                        (2) LH/RH
                                                                                                                                        Keeper

                                                                                                                                        No. 413.1
                                                                                                                                        (1) RH Cam



                                                                                                                                        No. 412.0
                                                                                                                                        (1) SS Tube 0




                                                                                                                                                        LOCKS, LATCHES & CATCHES
                                                                                                                                        22 x 2 x 2500
                                                                                   No. 414.0
                                                                                   (2) Guide Plate
                                                                                   85mm compl.


                                                                                                                                        No. 419.0
                                                                                                                                        (2) Ring


                                                                                   No. 415.0                                            No. 421.0
                                                                                   (1) Guide Plate
                                                                                   30mm compl.                                          (2) Rubber
                                                                                                                                        Protect.
                                                                                                                                        Cover
                                                                                   No. 418.0                                            No. 423.0
                                                                                   (1) Lever                                            (1) Weld-on
                                                                                   Retainer                                             Lever Mount
                                                                                   Assembly

                                                                                                                                        No. 423.1
                                                                                                                                        (1) SS Rivet
                                                                                                                                        10 x 22.5 mm
                                                                                                                                        No. 423.2
                                                                                                                                        (2) Washer
                                                                                   No. 422.0
                                                                                   (1) Handle




                                                                                                                                        No. 413.2
                                                                                                                                        (1) LH Cam




                                                 NOTE: All items depicted in this catalog are for reference only.

                                CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                         800-821-3520                                                   233
                                                                                     www.austinhardware.com

                           Dead Bolt Latches
                           Lock Kit
                           No. 411-SL
                           This handle has a handle return spring and key-locking cylinder.
                           Zinc finish is standard with steel construction.
                           The complete kit has everything you need.
                           Sold less pipe.

                           No. 411-S
                           is the same, but is less lock cylinder.

                           No. 411-SL-52, 411-S-52
                           are the part numbers for handle and pan only.




                                                                                                             Kit Includes...
LOCKS, LATCHES & CATCHES




                                                                                                                          1   Handle and tray assembly
                                                                                                                          2   Keepers
                                                                                                                          2   Cams
                                                                                                                          1   Mounting rod
                                                                                                                          2   Groove pins
                                                                                                                          2   Mounting brackets




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
234                                                                                                                   800-821-3520
                                    www.austinhardware.com

Dead Bolt Latches
Lock Kit
No. 411-SL




                                                                                                       LOCKS, LATCHES & CATCHES




                            NOTE: All items depicted in this catalog are for reference only.

                CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                    800-821-3520                       235
                                                                                        www.austinhardware.com

                           Dead Bolt Latches
                           2-Point Recessed Cam-Type Side Door Lock
                           Designed for thin-door installations, this cam-type side door lock permits building
                           the vehicle to the greatest legal width for maximum cargo space. A standard water
                           seal system using O-rings and bushings is provided to prevent water leakage at the
                           handle pivot point. Handle has thumb-trigger release with holes for padlock and
                           seal.

                           Ideally suited for side door application where maintaining legal width is required and
                           where added cube is essential for vans, trucks and trailers.

                           No. 5663-25
                           Zinc Finish

                           No. 5661-25
                           Same as 5663-25 less water seal
                           Other finishes available. Consult customer service.
LOCKS, LATCHES & CATCHES




                                                                      Features:
                                                                      - Forged steel cams and keepers
                                                                      - Designed for 1/2˝ standard pipe (not included)
                                                                      - Stamped steel handle and thumb release
                                                                      - Designed for 1-1/8˝ minimum door thickness
                                                                      - Cam-closing action is smooth and positive
                                                                      - Thumb-trigger release contains holes for padlock and seal
                                                                      - Furnished with split anchoring shafts for ease of installation
                                                                      - Weight: 6.5 lbs. less pipe



                                                                                 NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
236                                                                                                                      800-821-3520
                                                           www.austinhardware.com

Latch Systems
Three Way Latch System                                                               No. R030-0001 BLK
Featuring flush swing handle left and right. NEMA-4 sealed.                          Non-Locking

                                                                                     No. R030-0000 BLK
                                                                                     Key removable in locked position only

                                                                                     No. R030-0000 BLK SPEC
                                                                                     Key removable in locked or unlocked position



                                                                                     Flush 20mm (25/32”). Lever is clipped on to main
                                                                                     body and held by cam nut.

                                                                                     No welding; fastened with screws. Suitable for all
                                                                                     materials.

                                                                                     Single, two, or three way latch system.




                                                                                                                                                LOCKS, LATCHES & CATCHES
                                                                            Glassced
                                                                              for
                                                                          Rein ethan
                                                                           Dur




                        Unlock and lift handle                                                                  Swing handle to left or right


                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                                         237
                                                               www.austinhardware.com

                           Dead Bolt Latches
                           No. R020-0100                                                 No. R020-0200




                           No. R021-0200                                                 No. R020-0400
LOCKS, LATCHES & CATCHES




                           No. R021-0300                                                 No. R021-0100




                           No. R001-0700

                                                                                         No. R022-0300




                           No. R001-0200
                           (7mm)

                                                                                         No. R001-0800



                           No. R001-0300
                           (8mm)




                                                        NOTE: All items depicted in this catalog are for reference only.

                                           CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
238                                                                                             800-821-3520
                                                          www.austinhardware.com

Dead Bolt Latches
To order a complete NEMA-4 sealed three-point latch system, you need one
item from categories A and B, and two items from categories C and D.

               PART NO.               CHOICE OF HANDLES                                     KEY PART NO.                KEY MATERIAL


   A           R001-0100
               R001-0200
               R001-0300
               R001-0400
                                      Barrel with Slotted Insert
                                     Barrel with Insert
                                     Barrel with Insert
                                     Barrel with Insert
                                                            7mm
                                                            8mm
                                                            8mm
                                                                                          R015-0200 (7mm)
                                                                                          R015-0300 (8mm)
                                                                                          R015-0400 (8mm)
                                                                                                                          Zinc Die Cast


               R001-0500             Barrel with Insert     3mm                           R015-0500 (3mm)
               R001-0600             Barrel with Insert     5mm                           R015-0600 (5mm)
               R001-0700          Barrel with Insert Black Wingknob
               R001-0800                Barrel with Starhandle
               R020-0100               L-handle - Non-locking
               R020-0200                  L-handle - Locking
               R020-0400                 Padlockable Handle
               R021-0100               T-handle - Non-Locking
               R021-0200                  T-handle - Locking
               R021-0300               Wing Handle - Locking
               R022-0300             Wing Handle - Non-locking




                                                                                                                                                LOCKS, LATCHES & CATCHES
               CAM & ADAPTERS                 CAM SIZES                                                           CAM SIZES
               PART NO.                    H(MM)    H(INCH)                         PART NO.                   H(MM)    H(INCH)

   B           R053-0845
               R053-1045
               R053-1245
                                              8
                                             10
                                             12
                                                             5/16
                                                            25/64
                                                            15/32
                                                                                    R053-3045
                                                                                    R053-3245
                                                                                    R053-3445
                                                                                                                  30
                                                                                                                  32
                                                                                                                  34
                                                                                                                           1-3/16
                                                                                                                            1-1/4
                                                                                                                           1-11/32
               R053-1445                     14             35/64                   R053-3645                     36       1-27/64
               R053-1645                     16               5/8                   R053-3845                     38        1-1/2
               R053-1845                     18             45/64                   R053-4045                     40        1-9/16
               R053-2045                     20             25/32                   R053-4245                     42       1-21/32
               R053-2245                     22               7/8                   R053-4545                     45       1-25/32
               R053-2445                     24             15/16                   R053-4845                     48       1-57/64
               R053-2645                     26             1-1/64                  R053-5045                     50       1-31/32
               R053-2845                     28             1-7/64                  R053-0000                    TWO-POINT LATCH

               R080-0000-RB              Rod Guide - H = 20mm

   C           R080-0001-RB              Rod Guide - H = 26mm




No. R080-0000-RB
20mm                                                                                                            CUSTOMER HELPDESK
                                                                                                        There’s just not enough space to list
                                                                                                         all of the material and services we
                                                                                                         can offer. Let us know about your
                                                                                                                 needs and problems.

                                                                                                        Please refer to the size and number
                                                                                                       shown in this book. This will help us
No. R080-0001-RB                                                                                          in filling your order accurately.
26mm




                                                  NOTE: All items depicted in this catalog are for reference only.

                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                          800-821-3520                                          239
                                                                     www.austinhardware.com

                           Dead Bolt Latches



                                                                                                                                       Rods With Rollers & Adapters
                                                                                                                                  Part No.          L(mm)          L(inch)
                                                                                                                                 R080-0600            600          23-5/8

                                                                                                                     D           R080-0800
                                                                                                                                 R080-1000
                                                                                                                                 R080-1200
                                                                                                                                                      800
                                                                                                                                                     1000
                                                                                                                                                     1200
                                                                                                                                                                   31-1/2
                                                                                                                                                                   39-3/8
                                                                                                                                                                   47-1/4

                                                                                                                                                      Rods Without Rollers
                                                                                                                                  Part No.          L(mm)        L(inch)
                                                                                                                                 R081-0600           600           23-5/8
                                                                                                                                 R081-0800           800           31-1/2
                                                                                                                                 R081-1000          1000           39-3/8
                                                                                                                                 R081-1200          1200           47-1/4
                                                                                                                                                Rods With Rollers Fixed Length
                                                                                                                                                   (Min. Quantity 200 Pcs.)
                                                                                                                                                      L between (inch)
LOCKS, LATCHES & CATCHES




                                                                                                                                                             0-15”
                                                                                                                                                            15-17”
                                                                                                                                                            17-19”
                                                                                                                                 082-length                 19-21”
                                                                                                                                   (inch)                   21-23”
                                                                                                                                                            23-25”
                                                                                                                                                            25-27”
                                                                                                                                                            27-29”
                                                                                                                                                            29-31”
                                                                                                                                                            31-33”
                                                                                                                                                            33-35”
                                                                                                                                                            35-37”
                                                                                                                                 Additional                 37-39”
                                                                                                                                  lengths                   39-41”
                                                                                                                                   upon                     41-43”
                                                     (See illustration below)                                                     request                   43-45”
                                                                                                                                                            45-47”



                           Rod Adapter
                           No. R282119




                                   No. R201-0000 Gasket




                                                              NOTE: All items depicted in this catalog are for reference only.

                                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
240                                                                                                   800-821-3520
                                                           www.austinhardware.com

Dead Bolt Latches
Adjustable Trigger Latch
No. 534-05
With raised button, Chrome finish




Newly redesigned adjustable trigger




                                                                                                                              LOCKS, LATCHES & CATCHES
latches, with grip ranges from
.13˝ to 2.25˝. Available in key-locking
and non key locking versions,
keyed to CH series keys.


  Non-
Locking PartkNo.
         Loc ing        A          B
Park No.
 534-X     534-XK     .13˝     .75˝
 535-X     535-XK     .75˝    1.25˝
 536-X     536-XK 1.25˝       1.75˝
 537-X     537-XK 1.75˝       2.25˝
Available in black and chrome
finishes. Please specify -05 for
chrome or -30 for black when
ordering. Some parts may be a
Lead Time Item.


3-Point
No. 2392-T
3-point dead bolt latch, RH, Zinc Finish.
Gear actuated for smooth operation, must be opened by rotation of handle.
Latch measures 75.65˝ in locked position.
Standard length of upper and lower rod is 34.69˝.
Supplied with (2) Part No. 384-5 rod guides (2391-AT-11 strikers optional - consult customer service)




                                                   NOTE: All items depicted in this catalog are for reference only.

                                       CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                       241
                                                                                       www.austinhardware.com

                           Dead Bolt Latches
                           Tool Box Lock                                                                          No. 46H ZN
                           No. 46
                           (Universal Model)                                                                     Same as No. 46, except
                           For tool box or small door;                                                           has handle attached.
                           attached to inside. Fastened in                                                       For use on tool boxes,
                           place by screw at each end or can                                                     access panels or any
                           be spot-welded to metal door.                                                         other light duty application
                           Zinc finish.                                                                          where a positive latch is needed.
                           Weight: 1/4 lb.
                                                                                                                 Finish: Zinc
LOCKS, LATCHES & CATCHES




                           No. AE3-16201 RH                                                                                                          Right hand shown
                           Hooked Bolt Latch
                           This is a plant-on design with a large, hooked
                           bolt that withdraws totally into the case. It will
                           engage with any stud or pin.


                           No. AE3-16201
                           Left-Handed




                           No. 4901 CH
                           For use in tool box lids or any application where vehicle
                           latching is needed. Key-Locking. Available in Black
                           Nylon or Chrome Zinc Die-Cast.




                                                                                   No. 4901-2 Blk

                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
242                                                                                                                     800-821-3520
                                               www.austinhardware.com

Dead Bolt Latches
Similar to TBL-1 except
with different hole pattern
and parts are handed,
Zinc finish

No. 5605L-25
Left Hand

No. 5605R-25
Right Hand




                                                                                                                     LOCKS, LATCHES & CATCHES
                                                       WHENTHE
                                          JOB DEMANDS THE RIGHT
                                             HARDWARE FAST,CALL
                                  THE ONE TEAM THAT STOCKS EVERY
                               PRODUCT AND ALWAYS SHIPS ONTIME.
                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                 800-821-3520                                        243
                                                                                               www.austinhardware.com

                           Sliding Door Latches

                           No. 5696-PL
                           Sliding door latch, 4-1/8˝ L x 2˝ W x 5/8˝ Thick with 5/16˝ square hole for handle shank,
                           1-7/8˝ end of hook bolt to center of case, (4) 1/4˝ dia. mtg. holes
                           on 1-3/8˝ x 3-5/8˝ (H x V pattern) centers, plain steel




                           No. 5696-1/2 PL
                           Sliding Door Lock
                           Specifications
                           Length of lock ..........................4-1/8 in.
                           Width of lock ..................................2 in.
                           Thickness of case ........................5/8 in.
LOCKS, LATCHES & CATCHES




                           Square hole for handle shank ....5/16 in.
                           Weight each ................................74 lbs.
                           Finish ..............................................Plain




                           Universal Sliding Door Latch
                           No. 42 ZN
                           4-3/4˝ L x 1-5/8˝ W x 5/8˝ Thick
                           for 5/16˝ square shank,
                           (4) 1-3/64˝ dia. mtg. holes on
                           4-7/32˝ x 1-1/8˝ centers,
                           steel with zinc finish

                           No. 42H ZN
                           Same as 42-ZC with handle




                                                                                        NOTE: All items depicted in this catalog are for reference only.

                                                                          CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
244                                                                                                                             800-821-3520
                                                            www.austinhardware.com

Sliding Door Latches
No. 7-5690-50 Sliding Door Lock
Heavy duty sliding door lock has a firm spring action which latches the
door securely, requires but a slight turn of the handle to release it and
open the door. This ease of operation is due to the independent latch-
es hinged from a shoulder pin in center of lock case. Double latches
permit lock to be used for right or left hand doors as well as for two-
fold purpose of holding door in both open and closed positions. This
mechanism permits locking the doors from the inside by merely push-
ing in the locking thumb latch. It is then automatically unlocked by
turning the inside handle.

Weight Each: 1.55 lbs.
Finish, complete lock mechanism: zinc
Meets U.S. Post Office Specifications




                                                                                                                         LOCKS, LATCHES & CATCHES
Sliding Door Lock
No. 4-5696-1/2
Same as No. 5696-1/2 except two long hook bolts, 2-5/16 to center of
case with inside release. Zinc finish.




Sliding Door Latches
No. 4000
for Curbside and Package Delivery Truck Bodies


Push-Button Locking Lever
Operator locks the door from inside of truck with this push-
button locking lever. Note the generously proportioned han-
dle and the ample grip space provided. A slight turn of the
handle is all that’s required to open the latch. Positive clo-
sure is assured by the direct spring action of the latch. The
double-tongue construction adapts this latch for either right
or left doors. Serves also to hold doors open or closed and
locks in either position. 5/16” or 3/8” square hole for
outside handles. This latch is wrought steel. Handle and
tongue are forged steel. Zinc plated.
Maximum projection: 3-13/32”.




                                                    NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                 245
                                                                                      www.austinhardware.com

                           Sliding Door Latches
                           Sliding Door Latch for Bulkhead Door
                           No. 5698-AL
                           Ideally suited for internal partition doors in vans, latch can be disengaged even when
                           locked from the outside, composed of non-corrosive manganese bronze,
                           6˝ L x 2-5/8˝ W, LH, zinc finish
LOCKS, LATCHES & CATCHES




                           Paddle Handle Latch for Sliding Doors
                           No. 2818
                           Fits Both Right and Left Hand Doors
                           Latches in Both Open and Closed Positions
                           3⁄8˝ Square Shank
                           Finish: Zinc




                           No. K4002-4
                           Same as Part No. 2818 but with 5-1/2˝ handle




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
246                                                                                                                    800-821-3520
                                                            www.austinhardware.com

Sliding Door Latches
No. 251 ZN
Double rotary lock. Steel construction, left or right hand (left hand shown)
Finish Zinc Plated standard.




                                                                                                                         LOCKS, LATCHES & CATCHES
No. 251-AZN
Striker for No. 251 steel construction and Zinc Plated. Also has a rubber bumper.




                                                    NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                 247
                                                                     www.austinhardware.com

                           Sliding Door Latches

                           No. 250-5A LH




                           No. 250-3B
LOCKS, LATCHES & CATCHES




                           Rear Striker




                           No. 250
                           RH or LH - RH Shown




                                                              NOTE: All items depicted in this catalog are for reference only.

                                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
248                                                                                                   800-821-3520
                                                           www.austinhardware.com

Sliding Door Latches
No. 250-4B
Steel construction, universal striker for No.
250 lock. Supplied with rubber bumper.
Zinc finish.




                                                                                                                                     LOCKS, LATCHES & CATCHES
No. 250-5A LH                                                                        No. 250-3B
Steel construction, Front striker with rubber bumper.                                Steel construction, universal striker for No.
Zinc finish.                                                                         250 lock. Supplied with rubber bumper.
                                                                                     Zinc finish.




No. 250
Double rotary used for sliding doors.
Can be used with pushbutton or 5/16”
square shank handles. Used in conjunc-
tion with No. 220 handle, die-cast or
steel handles. All wear parts are case
hardened. Lock meets FMVSS206 safe-
ty specifications.




                                                   NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                              249
                                                                                        www.austinhardware.com

                           Sliding Door Latches

                           No. 252-A                                                                               No. 252-B
                           Striker, steel construction, zinc finish.                                               Striker, steel construction, zinc finish.
LOCKS, LATCHES & CATCHES




                           No. 252 Universal Double Rotary Lock
                           Steel construction, zinc finish, with inside handle




                                                                                 NOTE: All items depicted in this catalog are for reference only.

                                                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
250                                                                                                                      800-821-3520
                                     www.austinhardware.com

Sliding Door Latches

No. 252-A                                                      No. 252-B




                                                                                                        LOCKS, LATCHES & CATCHES
No. 252




                             NOTE: All items depicted in this catalog are for reference only.

                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                     800-821-3520                       251
                                                                                     www.austinhardware.com

                           Sliding Door Latches

                           No. 320 Handle and Tray Assembly
                           Clear E coat finish standard, aluminum die-cast construction, with
                           Briggs & Stratton double bitted key cylinder.
                           For use with No. 251 rotary.
LOCKS, LATCHES & CATCHES




                           No. 310 Bulkhead Handle
                           Plain finish standard, aluminum die-cast construction. Briggs & Stratton
                           double bitted key cylinder.
                           For use with No. 252 rotary.




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
252                                                                                                                   800-821-3520
                                                             www.austinhardware.com

Draw Latches
Hasp Latch
No. 4853X-P9-01
4-1/4˝ L with 1-7/16˝ inside hasp
length, staple has stud for riveting,
for doors up to 3/8˝ thick, Plain finish




No. 4849B-P9-01
Same as 4853X-P9-01 except for
use on doors from 7/8˝ to 1˝ thick,
also has 1˝ x 2˝ striker plate,
Plain finish




                                                                                                                                              LOCKS, LATCHES & CATCHES
Rotary Latches

400 Series Case Mounted Rotary Latches
Rotary Latch, 2-stage with both primary and secondary latching capabilities, meets FMVSS 206 standards for personnel restraint applications
(when used in conjunction with striker assembly 2T-400-52-64 and a certified FMVSS door system) with (1) 1/4˝ hole in actuator

No. 400 ZN RH
Right Hand

No. 400 ZN LH
Left Hand



400 series rotary latch with modified
actuator and (2) 1/4˝ dia. holes

No. 1-400 ZN RH
Right Hand

No. 1-400 ZN LH
Left Hand

Other versions of the 400 series rotary latch also available.
Consult customer service.




No. 2-400-52 ZN TRX
Recommended striker for 400
series rotary latches



                                                     NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                                     253
                                                                     www.austinhardware.com

                           Rotary Latches

                           Actuator Options
                           No. 9D-400 ZN RH DT




                           No. 9D-400 RH
                           Less Striker
LOCKS, LATCHES & CATCHES




                           No. D-400-53
                           Striker Plate

                           No. 2T-400-52
                           Striker SA




                           No. D-400 R
                           Rotary Latch




                                                              NOTE: All items depicted in this catalog are for reference only.

                                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
254                                                                                                   800-821-3520
                                                           www.austinhardware.com

Rotary Latches
450 Series Case Mounted Rotary Latches
Designed for installations where the 400 series rotaries cannot be used due to lever arm actuator position. Actuator
position of 450 series is located below the striker entry level. Meets FMVSS 206 standards for personnel restraint
when used in conjunction with striker assembly number 2T-400-52-64 and a certified FMVSS door system.
Zinc finish.

No. EMC 450 ZN RH
Right Hand, (3) 1/4˝ dia. holes in actuator

No. EMC 450 ZN LH
Left Hand, (3) 1/4˝ dia. holes in actuator




                                                                                                                         LOCKS, LATCHES & CATCHES
No. 6-450R-25
Right Hand, modified actuator
with (1) 1/4˝ dia. hole

No. 6-450L-25
Left Hand, modified actuator
with (1) 1/4˝ dia. hole

6-450R-25 and 6-450L-25 are




No. 2T-400-52-64
Striker for 450 Series Rotary Latches




                                                   NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                  255
                                                                                         www.austinhardware.com

                           Rotary Latches
                           300 Series Flange Mounted Rotary Latches
                           This latch is intended for use on compartment and other doors or on any other enclosure that would benefit from positive latching.
                           Compact design makes it ideal for applications where space is limited.

                           No. 1-300R-25
                           Right Hand

                           No. 1-300L-25
                           Left Hand

                           No. 2T-400-10
                           Other versions of 300 series rotary latches also available.
                           Consult customer service for details.
                           Recommended striker for 300 series rotary latches
LOCKS, LATCHES & CATCHES




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
256                                                                                                                     800-821-3520
                                                               www.austinhardware.com

Rotary Latches
240 Series Mini Rotary Latches
Ideal for small hoods, lids, doors and panels, and has a maximum rated load strength of 750
lbs.. Low-profile design and light weight allow it to be easily mounted using (2) 1/4˝ bolts.
Standard 240 series mini rotary latch, weight of 1/4 lb., Zinc plated carbon steel with
Stainless steel springs and Eberhard's exclusive Eberlube finish

No. 240 ZN RH
Right Hand

No. 240 ZN LH
Left Hand



Weight of 1/4 lb., Zinc
plated carbon steel with                                                                                                  No. 240 R&L
Stainless steel springs                                                                                                   Right hand shown.

No. 1-240 ZN RH
Right Hand




                                                                                                                                              LOCKS, LATCHES & CATCHES
No. 1-240 ZN LH
Left Hand

Also available in type 300 Stainless steel.
Consult customer service.



Weight of .22 lb., Zinc
plated carbon steel with
Stainless steel springs

No. 8-240 ZN RH
Right Hand

No. 8-240 ZN LH
Left Hand

Also available in type 300 Stainless steel.
Consult customer service.
                                                                                                                          No. 8-240 R&L
                                                                                                                          Right hand shown.


No. 240-52U ZN
Recommended striker                                                    No. 240-52
for 240 series mini rotary latches




                                                                     No. 1-240 R&L                                        No. 16592 R&L
                                                                      Right hand shown.                                   Right hand shown.

                                              Other lever arm configurations available. Consult customer service.
                                                       NOTE: All items depicted in this catalog are for reference only.

                                     CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                               800-821-3520                                   257
                                                                                       www.austinhardware.com

                           Rotary Latches
                           Slimline rotary, similar to 11665-16 and 11664-16,
                           except with wave washer to prevent rattling, Yellow Zinc finish

                           No. 14230-01
                           Right Hand (Illustrated)

                           No. 14229-01
                           Left Hand
LOCKS, LATCHES & CATCHES




                           Rotary Lock
                           No. 350
                           Remote actuation from cable or rods for use with 1, 2 or
                           3-point center controls. Base mounting with 4 holes.
                           Furnished with zinc finish. For use with 3/8 in. diameter
                           strike pin. Not furnished.




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
258                                                                                                                    800-821-3520
                                                           www.austinhardware.com

Rotary Latches
Mounting bracket for 240 series mini rotary latches, 1-1/2˝ L x 2-7/32˝ W,
.09˝ thick with (2) 1/4˝ holes on 7/8˝ mtg. centers, Zinc finish

No. 16592 ZN RH
Right Hand

No. 16592 ZN LH
Left Hand
Type 300 Stainless steel also available. Consult customer service.


Mounting bracket for 240 series mini rotary latches, 1-1/2˝ L x 2-7/32˝ W, .09˝ thick with
(2) 1/4˝ holes on 7/8˝ mtg. centers and (2) 1/2˝ x 1/4˝ slots on 3/4˝ centers, Zinc finish

No. 1-16592 ZN RH
Right Hand

No. 1-16592 ZN LH
Left Hand
Type 300 Stainless steel also available. Consult customer service.




                                                                                                                                                    LOCKS, LATCHES & CATCHES
Slimline Rotary Latches
11/4˝ Wide, Slimline rotary latches are designed for operator and compartment door applications. Complies with FMVSS 206 in primary and second-
ary latching positions when tested with approved striker bolts in accordance with SAE J839. Installed with (3) 1/4-20 UNC grade 5-type fasteners.
Rotary latches have a Zinc finish.

‘Thru’ Mount Holes                                                                   ‘Thru’ Mount Holes
No. 11189-16 RH                                                                      No. 11664-16 LH
No. 11190-16 LH                                                                      (Shown)
(shown)                                                                              No. 11665-16 RH


1/4-20 Tapped Mounting Holes                                                         1/4-20 Tapped Mounting Holes
No. 11788-16 LH                                                                      No. 11656-16 RH
No. 11789-16 RH                                                                      No. 11657-16 LH




No. 10335-16
Striker Stud




                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                                             259
                                                                                    www.austinhardware.com

                           Rotary Latches
                           TRI/MARK ROTARY SYSTEMS
                           Here are just a few of the arm options available by TRI/MARK, please call Austin Hardware & Supply for any questions you might have.




                           No. 11866-16                                                                       No. 11863-16
LOCKS, LATCHES & CATCHES




                           No. 10384-15                                                                       No. 10379-15




                                                                             NOTE: All items depicted in this catalog are for reference only.

                                                           CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
260                                                                                                                  800-821-3520
                                                           www.austinhardware.com

Rotary Latches
No. 11419-16
With Primary and Secondary latching positions.
Designed for most storage, compartment and access doors; windows;
and any application where finger or remote release is desired. Use with
No. 70-100 Series striker bolt. Available in right (shown) or left hand
configurations with tapped or smooth bore axles. For installation, see
latch and striker installation procedure. Two 1/4-20 UNC grade 5-type
fasteners are required (not included).
Strike, rotor and rotor catch are heat-treated, fine-blanked steel; case
halves are of zinc-plated, mild steel components.

No. 10335-16
Striker Stud (see page 268 for details)




                                                                                                                                                      LOCKS, LATCHES & CATCHES
No. 11442-16 LH (shown)
No. 11443-16 RH




FMVSS 206 APPROVED WHEN TESTED IN ACCORDANCE                                         No. 10795-16
WITH SAE J8396. Designed for heavy equipment applications.                           Striker with washer
Door thickness of 1-7/8” or greater.
Maximum operator safety, when used in conjunction with
L204 series free spinning “L” handle. Operator can override
locked mode from inside the cab, even when the door is
locked from outside.



No. 10795-16                                                                                                                        Left Hand Shown
Striker is sold separately.
                                                                                                            Part No.    “A”          “B”
                                                                                                            10795-16 .984(24.99) 1.715(43.56)

                                                   NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                                               261
                                                                                        www.austinhardware.com

                           Rotary Latches
                           No. 11446-16 RH                                                                          Complies with FMVSS206 in Primary and Secondary Latching Positions*
                           No. 11445-16 LH

                           No. 10795-16
                           Striker stud




                                                                                                                                                    Part No.    “A”          “B”
                                                                                                                                                    10795-16 .984(24.99) 1.715(43.56)
                                                              RH Shown
                                                                                                                     *When tested with approved striker bolts in accordance with SAE J839.
LOCKS, LATCHES & CATCHES




                           Designed for on- or off-highway applications
                           requiring resistance to dust and vibration, visible
                           surface or concealed inside installation, and
                           - Door thicknesses of 1-7/8” or greater
                           - Door weights of 50-200 lbs
                           - Door seal pressures of 50-150 lbs
                              (suggested for best results).

                           Available in right or left hand configurations with                                             RH Shown
                           (4) 1/4-20 UNC threaded axles or .286 diameter
                           “thru” axles as shown. With trip lever options.
                           Installation requires (4) 1/4-20 UNC grade 5-
                           type fasteners (not included). Fastener mount-
                           ing hole diameter should not exceed .281.



                           Internal latch components are heat-treated, fine-blanked steel.
                           Case halves are of high-strength steel. Finish is zinc-plated, yellow chromate steel
                           components. Oven-cured dry lubricant is applied at factory on all critical moving parts.
                           Additional lubrication to be applied in the field if required.




                           Optional Trip Levers
                           No. 11457-16 LH
                           (Shown) Striker Bolt Centerline




                                                                                 NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
262                                                                                                                      800-821-3520
                                                             www.austinhardware.com

Rotary Latches
3300 Series Rotary Latches
with Thumb Release
Thumb release feature is for applications
where a release on the latch body is all
that is needed.

No. 3300-TL
Right Hand, Zinc finish

No. 3300-TL-LH
Left Hand, Zinc finish



                                                                                                                        RH Shown



Single Rotary Latch, 2-Point
Rotary latch assembly, single rotor, 1/4-20 threaded




                                                                                                                                   LOCKS, LATCHES & CATCHES
inserts, 2-point linkage attachment with collar device
on linkage arm for easier rod attachment,
zinc plated yellow chromate finish
                                                                                                 LH Shown
No. 12719-01
Left Hand

No. 12720-01
Right Hand



Rotary Lock
No. ALH 450 ZN
Steel construction with zinc finish. Left or right hand available (LH
shown) with 2 pt actuator arm. Available with 1/4-20 threaded
sleeves and with modified actuators.




No. 150
Push-button rotary lock used in conjunction with the
10072 handle. Contains 2-stage locking feature with 3/8
in. diameter pin designed for compartment door use.
Pin not furnished. Furnished in zinc finish.




                                                     NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                          263
                                                                                      www.austinhardware.com

                           Rotary Latches
                           Derived from automotive boot (trunk) latches, these useful models provide a convenient and reliable way to secure top-opening compartments.
                           Applications include compressor and engine covers, ski-boxes, etc. Other uses include roller shutters and sliding doors.

                           The latches are spring loaded so that the “claw” slams onto a striker pin. It is released by pressure on the top trigger plate, applied directly by a cam
                           or lever, or by remote cable fixed through a pierced hole. Operation is either from right or left, latches are mounted either through top-plate or side-
                           flanges. A molded cover is available for top-flange models.


                           No. 9/00283                                                                          No. 9/00283
                           Top-Flange fitting, RH                                                               Dimensions
                           Can be supplied with molded buffer                                                   Top-Flange latch
                           3/21787 fitted to latch (as 9/00263).
                           Shown in latched position
                           (claw operates right to left).




                                                                                                                No. 9/01283
                                                                                                                Dimensions
LOCKS, LATCHES & CATCHES




                                                                                                                Side-Flange latch
                           No. 9/01183
                           Top-Flange fitting, LH
                           Can be supplied with
                           molded buffer 3/21787
                           fitted to latch;
                           left to right operation.

                                                                                                                No. 9/00724
                                                                                                                Pin-type striker




                           No. 9/01283                                                                          Optional Items
                           Side-Flange fitting, RH                                                              No. 9/00724                                  No. 3/21787
                           Cannot be fitted with molded                                                         Striker                                      Buffer
                           buffer; right to left operation.




                                                                                                                Molded buffer is pressed-on to give improved appearance, protection
                           No. 9/01583                                                                          against corrosion. The striker plate has shaped holes for adjustment.
                           Side-Flange fitting, LH                                                              A loop-type striker is also available (No. 9/00095). Ask for drawing
                           Cannot be fitted with molded                                                         dimensions.
                           buffer; left to right operation.
                                                                                                                Part Number                       Description
                                                                                                                3/21787                           PVC “Buffer” only
                                                                                                                9/00263                           Top-flange latch c/w buffer
                                                                                                                9/00283                           Top-flange latch, no buffer, RH
                                                                                                                9/00724                           Pin-type striker
                                                                                                                9/01183                           As 9/00283, reverse handed (LH)
                                                                                                                9/01283                           Side-flange latch, RH
                                                                                                                9/01583                           Side-flange latch, LH
                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
264                                                                                                                    800-821-3520
                                                           www.austinhardware.com

Rotary Latches
No. AH 2-400-52
Allen Head

No. AH 2-400-10
is the same, but less washer.




No. 3400-16
Either striker maybe used with
No. 1-400 or No. 400 to meet




                                                                                                                        LOCKS, LATCHES & CATCHES
FMVSS206.




Striker Pin with Washer
No. ALH 450-1 ZN
Steel construction with zinc finish. Available with
longer threaded portion (specify 450-1) and available
with headless striker pin.




                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                 265
                                                                                  www.austinhardware.com

                           Rotary Latches
                           No. 5-400-52
                           Hex Head Striker
                           1-3/8” thread length with
                           53/64” shoulder length
                           shoulder dia. .548”




                           No. 2-400-10 Zn Trx                                                                                                400-12
                           Striker Pin Only.                                                                                                  Washer
                           Finish: Zinc wit yellow chromate
                           Weight: .08 lbs.
LOCKS, LATCHES & CATCHES




                           No. 2-400-52 Zn Trx                                                              No. 3900-20
                           Striker with Washer
                           Same as 2-400-10 except it is supplied
                           with tension washer.




                           No. 3400-16
                           Striker




                                                                           NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
266                                                                                                                800-821-3520
                                                           www.austinhardware.com

Rotary Latches

No. 10338-16                                                                         No. 12873-01
Hex head used with double rotary                                                     Torx Head Striker Stud used with single rotary




Part No.      “A”                  “B”
10338-16      1.484(37.69)         2.215(56.26)

No. 10646-16                                                                         No. 10339-16
Hex head used with double rotary                                                     Hex head used with double rotary




                                                                                                                                                      LOCKS, LATCHES & CATCHES
Part No.      “A”                  “B”                                               Part No.          “A”              “B”
10646-16      1.284(32.61)         2.025(51.44)                                      10339-16          1.174(29.82)     1.905(48.39)

No. 16356




Alignment System/Guidance Plate
Here is a simple, inexpensive, but very effective method to align doors,
prevent rattle, and reduce loads upon the latch. The hardened steel pin
is usually fitted to the door frame and plate to the door edge, but this
can be reversed. As the door closes, the ‘shoulder’ on the pin is drawn
into the shaped slot and provides firm and positive support.
Both pieces are zinc-plated.


No. 3/13520                            No. 3/13521
Plate                                  Pin




                                                                                                                                       Pin threaded
                                                                                                                                       5/16” UNF
                                                                                               Pin headed with No. 3 crosspoint
                                                                                               drive (head diameter 22mm)




                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                                               267
                                                                                      www.austinhardware.com

                           Rotary Latches

                           No. 10335-16
                           Recommended striker stud for Slimline Rotary Latches, grade 8, heat treated, Zinc finish




                           Adjustable Cage Nut
LOCKS, LATCHES & CATCHES




                           Adjustable cage nuts provide 1/4˝ vertical adjustment and
                           1/8˝ total door seal adjustment. Steel nut withstands tensile
                           loads applied to striker bolt in excess of 2500 lbs. as
                           required by FMVSS 206

                           No. 12111-16
                           7/16-14 threads,
                           35 lb. torque specification

                           No. 11920-16
                           3/8-16 threads,
                           35 lb. torque specification




                           Rod / Cable Adapter
                           No. 16619-15PK-25
                           Rod / cable adapter for rotary
                           and multi-point paddle applications
                           - Adapter designed for quick adjustment of
                             rod or cable on 13 gauge (.089) material
                           - Recommended torque not to exceed 10˝ lbs.
                           - Material 12L14 - zinc finish




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
268                                                                                                                    800-821-3520
                                                            www.austinhardware.com

Eye Rods and Brass Fittings

Eye Rods and Brass Fitting for Rotary Latches
No. TH2988                                                                           Part No.          Length          Thread                       Thread
                                                                                                                        Size    Part No.   Length
Brass fitting to connect eye rods to                                                                                                                 Size
RH and LH rotary latches                                                                TH4               4˝           10-24     TH24       24˝     10-24
                                                                                        TH5               5˝           10-24    TH24-3/8   243/8˝   1/4-20
Eye Rods for use with rotary latches, Zinc-Yellow finish
(see chart for desired length and thread size)                                          TH6               6˝           1/4-20    TH25       25˝     10-24
                                                                                       TH6-C              6˝           10-24    TH25-1/2   251/2˝   10-24
                                                                                        TH7               7˝           10-24     TH26       26˝     1/4-20

                                                                                        TH8               8˝           10-24    TH26-1/2   261/2˝   10-24
                                                                                       TH9-C              9˝           10-24    TH26-Q      26˝     10-24
                                                                                      TH10-C             10˝           10-24     TH27       27˝     10-24
                                                                                     TH10-1/2           101/2˝         10-24    TH27-1/2   271/2˝   10-24
                                                                                      TH11-C             11˝           10-24     TH28       28˝     10-24
                                                                                       TH12              12˝           10-24     TH29       29˝     10-24
                                                                                     TH12-3/8           123/8˝         1/4-20   TH29-1/2   291/2˝   1/4-20

                                                                                     TH13-1/2           131/2˝         10-24     TH30       30˝     10-24




                                                                                                                                                             LOCKS, LATCHES & CATCHES
                                                                                     TH14-1/2           141/2˝         10-24    TH30-1/2   301/2˝   10-24
                                                                                       TH15              15˝           10-24     TH31       31˝     10-24
                                                                                     TH15-5/8           155/8˝         1/4-20   TH32-1/2   321/2˝   10-24
                                                                                       TH16              16˝           10-24     TH33       33˝     10-24
                                                                                     TH16-1/2           161/2˝         10-24    TH34-1/2   341/2˝    10-4
                                                                                     TH17-1/2           171/2˝         1/4-20    TH35       35˝     10-24
                                                                                       TH18              18˝           10-24     TH38       38˝     10-24
                                                                                     TH18-1/2           181/2˝         10-24     TH39       39˝     10-24
                                                                                       TH20              20˝           10-24     TH41       41˝     10-24
                                                                                     TH20-1/2           201/2˝         10-24     TH43       43˝     10-24
                                                                                       TH21              21˝           10-24     TH44       44˝     10-24
                                                                                       TH22              22˝           10-24     TH45       45˝     10-24
                        No. TH2988                                                     TH23              23˝           10-24     TH48       48˝     None




Other brass fittings available:

No. TH2989
.625˝ L,
1/4-20 LH thread

No.TH2990
.9375˝ L,
1/4-20 RH thread*

*Other dimensions as shown in print are adjusted accordingly.
Consult customer service for exact dimensions.

The length of the rod is measured from center of eyerod hole to end of rod.
The diameter of the eyerod hole is .266˝.
2˝ length of thread on all rods, right hand.
TH6 is an exception, it has 1/4-20 threads and is a “L” rod.

                                                    NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                                                     269
                                                                               www.austinhardware.com

                           Rotary Latches

                           No. 52-C
                           Slamming Lock (Universal Model; 1/8” case)




                           No. 60
LOCKS, LATCHES & CATCHES




                           Extension Lock




                           No. 60-SL
                           Extension Lock




                                                                        NOTE: All items depicted in this catalog are for reference only.

                                                          CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
270                                                                                                             800-821-3520
                                                     www.austinhardware.com

Cab Locks

No. 52-C
Slamming Lock (Universal Model; 1/8” case)                                     This lock can be used for either right or left hand applications, with any
                                                                               handle using standard 5/16” shank. Bushing 4” from end of lock.
                                                                               Permits use of flush handle without projection beyond door edge.
                                                                               Available with reverse bolt when specified.




No. 60




                                                                                                                                                            LOCKS, LATCHES & CATCHES
Extension Lock (Right hand shown)                                              One-piece construction includes inside handle.
                                                                               Locking device (left hand standard) for inside door. Matched rosettes
                                                                               on locking device and handle.




                                                                                              Specifications
                                                                                              Length ..................5-1/4”
                                                                                              Width ....................2-1/2”
                                                                                              Thickness ................3/4”
                                                                                              Flange ......................1/2”
                                                                                              Case ........................1/8”
                                                                                              Striker bolt1” (with 5/16” bushing)
                                                                                              Weight: 2 lbs. (907.2 grams) Finish: Zinc




No. 60-SL
Extension Lock (Heavy duty)                                                    Includes inside handle and striker.
                                                                               Locking device standard for inside door. Rosettes on locking device and
                                                                               handle. Both left and right hand models.




                                                                                              Specifications
                                                                                              Length ......................................10”
                                                                                              Width ..........................................5”
                                                                                              Handle length ..............................5”
                                                                                              Hardened striker bolt ............1-1/4”
                                                                                              Weight: 2 lbs. 4 oz. (1020.6 grams)
                                                                                              Finish: Zinc




                                             NOTE: All items depicted in this catalog are for reference only.

                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                     800-821-3520                                                           271
                                                                                      www.austinhardware.com

                           Cab Locks

                           No. 56
                           (Left hand shown)

                           Zinc finish steel construction. Accepts 5/16” shank. Left or right hand with inside handle and
                           locking trigger. Available with mounting flange, handle return spring and override when specified.
LOCKS, LATCHES & CATCHES




                           No. 56-ASL
                           (Left hand shown)

                           Zinc finish steel construction. Accepts 5/16” shank. Left or right hand with inside handle and
                           locking trigger. Has bronze strike. Available without strike.




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
272                                                                                                                    800-821-3520
                                 www.austinhardware.com

Cab Locks
No. 56
Cab Lock




                                                                                                    LOCKS, LATCHES & CATCHES
No. 56-ASL
Cab Lock




                         NOTE: All items depicted in this catalog are for reference only.

             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                 800-821-3520                       273
                                                                                       www.austinhardware.com

                           Compartment Latches

                           Compartment latch with spoon handle, for 5/16˝ square shank,
                           3-3/8˝ L x 2-1/16˝ W, 1˝ bolt extends 1/2˝ from case, silver zinc finish

                           No. 55 ZN RH
                           Right Hand

                           No. 55 ZN LH
                           Left Hand




                                                                                                                                                       Left hand shown




                           No. 55-LH-ZN-BP
LOCKS, LATCHES & CATCHES




                           Compartment latch with plastic coated straight handle, silver zinc finish




                           Compartment latch with 4-3/4˝ L spoon handle, for 5/16˝ square shank,
                           3-3/8˝ L x 2˝ W x 5/8˝ case thickness, 3/4˝ edge of door to center of
                           square hole, 5/16˝ square hole for handle, (4) 17/64˝ dia. mtg. holes and
                           (2) 17/64˝ x 1/2˝ mtg. slots, Stainless steel

                           No. 5669 SS RH
                           Right Hand, stainless steel

                           No. 5669 SS LH
                           Left Hand, stainless steel

                           No. 5669 ZN RH
                           Right Hand, zinc finish
                                                                                                                                                   Right hand shown
                           No. 5669 ZN LH
                           Left Hand, zinc finish


                           Compartment latch, similar to 5669 series except without spoon handle,
                           Zinc finish

                           No. 5667 ZN RH
                           Right Hand

                           No. 5667 ZN LH
                           Left Hand

                           Also available in Stainless Steel.


                                                                                                                                                   Left hand shown
                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                                CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
274                                                                                                                     800-821-3520
                                WHENTHE
                   JOB DEMANDS THE RIGHT
                      HARDWARE FAST,CALL
           THE ONE TEAM THAT STOCKS EVERY
        PRODUCT AND ALWAYS SHIPS ONTIME.
         Why spend hours searching when the items you need are just seconds away at Austin
         Hardware & Supply. With over 15,000 quality products stocked and ready to ship in a
         minute, we're truly your one-stop shop for complete hardware systems. Adhesives, locks, han-
         dles, hinges, drawer slides, weatherstripping, specialty items and more — they're all part of
         the biggest selection on the planet. And nobody out-hustles our courteous hardware pros for
         quick turnaround on your orders. Find out how easy
         hardware can be at Austin Hardware & Supply.
         We're the right call every time.




C A L I F O R N I A • G E O R G I A • I D A H O • I N D I A N A • M I S S O U R I • P E N N S Y LVA N I A • T E X A S • W I S C O N S I N

                                            w w w. a u s t i n h a r d w a r e . c o m
                                                       800-821-3520
                                                                     www.austinhardware.com

                           Compartment Latches

                           No. 58
                           (Left hand shown)                                                   No mortising or blocking required. Fitted with high carbon tempered flat
                                                                                               steel spring for smooth operation. Die-formed bushing. Both left and
                                                                                               right hand models. If light spring is desired, specify No. 58-2.
                                                                                               Available with reverse bolt when specified.




                                                                                               Specifications
                                                                                               Length ..................................3-3/8”
                                                                                               Width ..........................................2”
                                                                                               Weight: 8 oz. (226.8 grams)
                                                                                               Finish: Zinc




                           No. 54
                           (Left hand shown)                                                   Inside handle. No mortising or blocking. Die-formed bushing. Inside
LOCKS, LATCHES & CATCHES




                                                                                               handle integral with bushing. Coiled compression spring. Weight: 5/8
                                                                                               lb. (283.5 grams) Both left and right hand models. Also available with-
                                                                                               out integral inside handle. Zinc finish.


                                                                                               Specifications
                                                                                               Length ..............................2-15/16”
                                                                                               Width ....................................2-7/8”
                                                                                               Striker bolt ..................................1”
                                                                                               Weight: 8 oz. (226.8 grams)
                                                                                               Finish: Zinc



                           No. 57
                           (Left hand shown)                                                   Inside handle. No mortising required. For limited space, can be applied
                                                                                               to door frame 2” wide. Die-formed bushing. Both left and right hand
                                                                                               models. Available with reverse bolt when specified.




                           No. 2100
                           Secondary Latch                                                     Incorporates threaded or hex receptacle actuator for use with authorized
                           Tool Operated                                                       tool. Easy to mount and assemble: just bolt or screw latch to hat section
                                                                                               and insert threaded actuator into latch, securing with jam nut as required.

                           No. 2100H                                                           Actuator can be extended through latch to accept handle on inside for
                           Hex receptacle                                                      room-size enclosure panels. Can be used with intermediate mounting
                                                                                               bracketry for deeper-level latching. Slotted mounting holes in latch allow
                                                                                               for easy adjustment.
                           No. 2100                                                            Made of sturdy, all-metal construction. Spring in latch is designed for
                           Threaded receptacle                                                 effortless engagement and easy release.


                                                              NOTE: All items depicted in this catalog are for reference only.

                                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
276                                                                                                   800-821-3520
                                                   www.austinhardware.com

Compartment Latches

No. 58
Cab Lock




No. 54
Cab Lock




                                                                                                                      LOCKS, LATCHES & CATCHES
No. 57
Cab Lock




No. 2100
Slide Bolt Assembly




No. 2100H
Slide Bolt Assembly
Same as 2100 except is operated with
a 6 mm hex wrench.




                                           NOTE: All items depicted in this catalog are for reference only.

                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                   800-821-3520                       277
                                                                                  www.austinhardware.com

                           Compartment Latches

                           No. 55-A
                           Left hand shown
                           Inside handle. No mortising required.
                           Built-in pull handle integral with lock
                           bushing. Die-formed steel bushing.
                           Both left and right hand models.




                                                                                                                                              Specifications
                                                                                                                                              Height ..........4-11/32”
                                                                                                                                              Width ................2-3/8”
                                                                                                                                              Handle ..........3-51/64”
                                                                                                                                              Striker bolt ........1-1/2”
                                                                                                                                              Weight: 1 lb.
                                                                                                                                              Finish: Zinc
LOCKS, LATCHES & CATCHES




                           No. 56-A
                           Left hand shown
                           Inside handle. No mortising required.
                           Locking device locks and unlocks by
                           easy thumb pressure. Both left and
                           right hand models.




                                                                                                                                              Specifications
                                                                                                                                              Height ..........4-11/32”
                                                                                                                                              Width ................2-3/8”
                                                                                                                                              Handle ..........3-51/64”
                                                                                                                                              Striker bolt ........1-1/2”
                                                                                                                                              Weight: 1-1/8 lbs.
                                                                                                                                              Finish: Zinc



                           No. 127-ZN
                           Left hand shown.
                           Steel construction. Accepts 5/16”
                           square shank. Comes with actuator
                           lever. Available left or right hand and
                           reverse bolt.




                                                                                                                                              Specifications
                                                                                                                                              Height ..............3-3/8”
                                                                                                                                              Width ......................2”
                                                                                                                                              Handle ....................1”
                                                                                                                                              Striker bolt ........1-1/2”
                                                                                                                                              Weight: 1/2 lb.
                                                                                                                                              Finish: Zinc

                                                                           NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
278                                                                                                                800-821-3520
                                                    www.austinhardware.com

Compartment Latches

No. 55-A
Cab Lock




                                                                                                                       LOCKS, LATCHES & CATCHES
No. 56-A
Cab Lock
Weight: 1 lb. 2 oz. (510.3 grams)




No. 127-ZN
Cab Lock




                                            NOTE: All items depicted in this catalog are for reference only.

                                CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                    800-821-3520                       279
                                                                                      www.austinhardware.com

                           Compartment Latches

                           No. 5619                                                                             No. 5620
                           No. 5619A                                                                            Lock Striker
                           Paddle Latch Striker
                           Finish: Zinc-plated                                                                  No. 5620 Nylon
                           Has both a long primary catch and                                                    (same striker only in black nylon)
                           a shorter secondary latch. Also
                           available is stainless steel
                           No. 5619A SS.




                                                                     No. 12 gauge, w/ holes
                                                                                                                Specifications
                                                                                                                Length of plate                    2-1/2”
                           No.               Variations                       Weight                            Width of plate                     3/4”
                           5619A             With slotted holes               1 oz.                             Thickness of plate                 5/32”
                           5619              Without holes                    1 oz.                             Width of catch                     15/16”
                           5619A SP          With .281 dia. round holes       1 oz                              Thickness of heel of catch         9/16”
LOCKS, LATCHES & CATCHES




                           5619A SS          With slotted holes               1 oz.                             Material: Malleable Iron
                           Stainless Steel                                                                      Finish: Zinc
                                                                                                                Weight: 2 oz. each



                           No. 45 ZN                                                                            No. RS-03
                           Striker Plate                                                                        Nylon Strike
                           Available in stainless steel. Hole                                                   White
                           centers 2-3/4”
                           11 ga. material.




                                   19/64 x 1/2                                                                  Length                            2-1/2”
                                                                                                                Width                             3/4”
                                    slot (2 pl)
                                                                                                                Hole Centers                      1-3/4”



                           No. 561
                           This simple, effective strike is intended for use with many latching mech-           The latch has been tested to 400 lbs. perpendicular pull. Instead, the rod
                           anisms having 5/16” dia.. rods, which normally operate as dead bolts.                is withdrawn in customary dead bolt fashion (i.e., a center mechanism
                           This strike allows such a latching mechanism to operate as a slam/dead               must be turned to retract the rod from the strike. See illustration.) May
                           bolt. The strike has a spring-loaded plunger which permits the rod to                be used, for example, in conjunction with squeeze latch No. 560 if
                           pass into the strike and capture it. The rod cannot be released in the               equipped with 5/16” diameter rods. Easily attached with screws, rivets or
                           opposite direction.                                                                  bolts. Weight: 2 oz.




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                                CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
280                                                                                                                    800-821-3520
                                                              www.austinhardware.com

Compartment Latches

No. 9-01243                                                                             No. 3-22387
Pull-knob fitment                                                                       Bolt nose down




Precision made latches with milled steel slam bolt,
these are available in various options:

No. 3-22386                                                                             No. 3-22387
with cropped rivet and wave washer to suit slam systems 3/02858 etc.
                                                                                        Illustrated bolt reversible
No. 3-22387
with pierced bolt pull only; this is reversible to give 3/22388 (nose up).

No. 9-01187
special version in stainless steel.

No. 9-01437
top knob, nose up, stainless steel.




                                                                                                                                                                                  LOCKS, LATCHES & CATCHES
Other models can be offered, including types with pull-knob fitted on
either top or bottom face of latch, as illustrated.


                                 Ordering Code                                          A. Bolt thickness ..........0.5”       F. Hole centers............................1.75”
              Part Number       Description                                             B. Bolt pull....................0.5”   G. Hole centers ............................1.3”
             3/22386            End latch, c/w cropped rivet                            C. Width ....................2.25”     H. Bolt protection variable to........0.8”
             3/22387            End latch, no rivet, nose down                          D. Bolt width ..............0.75”      I. Hole dimensions ..............0.22” dia.
             3/22388            End latch, no rivet, nose up                            E. Length, body ..........2.45”        J. Hole dimension ......................0.20”
             9/00028            End latch, c/w pull handle
             9/01187            As 3/22387 in stainless steel
             9/01243            End latch with top pull-knob                            No. 9-00028
                                                                                        Bolt reversible
                                                                                        Dimensions of wire loop handle
                                                                                        can be varied to order
Standard latch with cropped rivet & washer
No. 3-22386
With cropped rivet in bolt-pull, as supplied with 2-way slam systems.
Bolt is reversible.

No. 3-22392
Has off-centre pull,
bolt non-reversible.




Bottom-Knob Fitment                                                                     Special latches for sliding doors & roller shutters
No. 9-01059
Latch as shown in mild
steel with bottom knob.
Reverse bolt and
stainless versions
on request.


                                                                                        No. 9/01455 LH, as shown                      No. 9/01456, RH, as shown
                                                                                        No. 9/01457, LH with rivet                    No. 9/01458 RH, with rivet

                                                                                        The slam bolt is machined to be withdrawn by lateral force against a suit-
                                                                                        able striker. The cropped rivet can be provided.

                                                      NOTE: All items depicted in this catalog are for reference only.

                                      CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                              800-821-3520                                                                        281
                                                                                         www.austinhardware.com

                           Slam Latches

                           No. 9-01186 BLK
                           Molded Slam Latch

                           No. 9-01529
                           Slam Latch with Pull Knob




                           ‘Fix-through’ design and totally corrosion resistant. This revolutionary
                           concept provides a latch with a number of advantages over conventional
                           steel fabricated models. It is totally corrosion-resistant with stainless steel
                           spring, with self-lubricating as inherent property of the material. The latch
                           has an attractive, textured finish, is lightweight (only 50 grams), and inex-
                           pensive (less than half the cost of metal latches).
LOCKS, LATCHES & CATCHES




                           The latch is designed to be mounted through the fixing holes in the body
                           and operated by a rod or cable. The slotted bolt pull area provides ‘lost
                           motion’ so that the latch can always retract, even when the operating
                           system is in ‘locked’ position. Versions are available for single-point action,
                           with the knurled knob fitted on either upper or lower surface of the
                           bolt-pull. Large-headed rivets should be used to mount latches so that
                                                                                                                    A. Body length            80mm   G. Knob dia.        38mm
                           force is spread over the widest area.
                                                                                                                    B. Body width             29mm   H. Knob height      12mm
                           Side-Action Models                                                                       C. Body height            18mm   I. Hole dia.        6mm
                           Tooling allows special versions to be made with side-action bolt, suitable               D. Bolt projection        16mm   J. Location         25mm
                           for roller shutters, etc. Body height of latch can be reduced to only 13mm               E. Location               23mm   K. Slot             7mm x 20mm
                           for use with thin sections.                                                              F. Location               44mm




                           No. 9-00805
                           Slam Latches
                           These are plant-on latches with a top-mounted handle, and exceptionally
                           deep steel follow-bush to allow operation by a standard 0.312” steel shaft
                           (normally closed-off on the inside for visual appearance). Finish is yellow
                           zinc-plated with black plastic-coated handle. (Chromium plating to special
                           request only.) Four versions are available as illustrated.




                                                                                                                    A. Case Length            80mm   F. Maximum height   44mm
                                                                                                                    B. Bolt projection        29mm   G. Handle length    38mm
                                                                                                                    C. Case height            18mm   H. Location         12mm
                                                                                                                    D. Bolt width             16mm   J Hole dia.         6mm
                                                                                                                    E. Case width             23mm

                                                                                  NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
282                                                                                                                       800-821-3520
                                                            www.austinhardware.com

Spring Fasteners

EMC 5697-C PL
8-7/8˝ L x 3/4˝ W, Plain steel

EMC 5697-C E-Coat
Black E-Coat

EMC 5697-D PL
9-1/4˝ L x 3/4˝ W, Plain steel

EMC 5697-D E-Coat
Black E-Coat




                                                                                                                          LOCKS, LATCHES & CATCHES
End Bolts

No. 90 ZN 0 W/O
Offset End Bolt, 3-3/4˝ L x 2-1/8˝ W,
9/16˝ offset, accepts 1/4˝ dia. rod, Zinc finish

No. 90 ZN 0 3/8
Same as 90 ZN 0 W/O except accepts 3/8” diameter rod




No. 90 ZN F W/O
Flush End Bolt, 3-3/4˝ L x 2-1/8˝ W, accepts 1/4˝ dia. rod, Zinc Finish

No. 90 ZN F 3/8
Same as 90 ZN F W/O except accepts 3/8˝ diameter rod




                                                    NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                  283
                                                                                          www.austinhardware.com

                           End Bolts

                           No. 90-W ZN F 45
                           Flush End Bolt, 3-1/2˝ L x 2˝ W, 1/2˝ stud, 45° bolt,
                           Zinc finish

                           No. 90-W ZN F 30
                           Flush End Bolt, 3-1/2˝ L x 2˝ W, 1/2˝ stud, 30° bolt,
                           Zinc finish

                           No. 90-W ZN 0
                           Offset End Bolt, 3-1/2˝ L x 2˝ W, 7/16˝ offset,
                           1/2˝ stud, 30° bolt, Zinc finish




                           No. 120 ZN F W/0
                           3-3/4˝ L x 2-1/8˝ W, accepts 1/4˝ rod,
                           30° bolt, Zinc finish
LOCKS, LATCHES & CATCHES




                           No. 120 ZN 0 W/O
                           Same as 120 ZN F W/O except has 9/16” offset

                           Also available to accomodate a 3/8” rod.




                           No. 565699-51 ZN
                           Lower Bolt used on Part No. FOR565698-25.
                           9/16˝ offset, 25 Lb. spring, Zinc finish

                           No. 565699-52 ZN
                           Upper Bolt on Part No. FOR565698-25.
                           Flush bolt, 25 lb. spring, Zinc finish




                           No. 565694-55 ZN LT
                           45° bolt, 7 Lb. spring, Zinc finish

                           No. 565694-55 ZN
                           45° bolt, 25 Lb. spring, Zinc finish



                                                                                   NOTE: All items depicted in this catalog are for reference only.

                                                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
284                                                                                                                        800-821-3520
                                                            www.austinhardware.com

End Bolts

No. 90-S ZN F W/O
1/4” diameter hole standard (also available with hook for finger-pull actuation).
Available in zinc finish or stainless steel.
Also available with 3/8” diameter hole.

No. 90 ZN F RB
Reverse bolt. Can be supplied with or
without 1/4” dia. finger pull hook (No. 90-2).

No. ALH 90 SS F W/0
Stainless steel. Also can be supplied with a
Cable Eye for use with cable instead of a rod.




                                                                                                                        LOCKS, LATCHES & CATCHES
No. 90-S ZN 0 W/O
1/4” diameter hole standard (also available with hook for finger-pull actuation.
Available in zinc finish ( 3/8” diameter hole also available).
Can be supplied with or without 1/4” dia. finger pull hook (No. 90-2).
Weight: 8.4 oz. (238.1 grams)
Also can be supplied with a Cable Eye for use with cable instead of a rod.




                                                    NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                285
                                                                                       www.austinhardware.com

                           End Bolts

                           No. 97 LDE
                           Latch bolt and handle pull combination. This latch
                           is designed for drawers that need to be positively
                           latched in the closed position. Furnished
                           zinc-plated with holes.
LOCKS, LATCHES & CATCHES




                           No. 5597
                           Ideal for drawers and small cabinets. Has lb. spring, easily actuated.
                           Four standard holes can be furnished: 7/32” dia. on 1-1/8” x 1-1/4” centers.




                           No. 3-5597
                           Same as No. 5597 except slide bolt bevel is reversed.
                           Also available with mounting holes.




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
286                                                                                                                     800-821-3520
                                                        www.austinhardware.com

End Bolts

No. 4974-52U
2-5/8˝ L x 2˝ W, 45˚ bolt,
(4) 1-3/64˝ dia. mtg. holes
on 1-15/16˝ x 13/8˝ centers, 7 lb. spring,
with cable locking washer,
for use with cables, Zinc finish

No. 4968-52U
45° bolt, 15 lb. spring, for use with cable,
Zinc finish




No. 4972-58U
Same as 4974-52U except for use with rods




                                                                                                                           LOCKS, LATCHES & CATCHES
“J” Hook for End Bolts
No. 90-2 ZN
1/4˝ diameter, Zinc finish




No. 6011-055
1/2˝ offset, 30° bolt, with hook,
Zinc finish

No. 6011-162
Flush, 30° bolt, for use with 3/8˝ rod,
Zinc finish




                                                NOTE: All items depicted in this catalog are for reference only.

                                    CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                        800-821-3520                       287
                                                                                     www.austinhardware.com

                           End Bolts

                           No. 5658-1 ZN Bolt
                           No. 5658-50 ZN Boltcase
                           No. 5658-3 ZN Screw
                           Tapered, used with series 5658 and 5659 latches,
                           Zinc finish




                           No. 110-52 ZN 0
                           3-1/2˝ L x 2-1/16˝ W, 9/16˝ offset, reversed
LOCKS, LATCHES & CATCHES




                           45° bolt, for use with
                           3/8˝ dia. rods, Zinc finish




                           Finger Bolts

                           No. 90M ZN 45
                           Flush, 2-5/8˝ L x 2˝ W, (4)
                           13/64˝ dia. mtg. holes on
                           1-15/16˝ x 11/2˝ centers,
                           1˝ bolt projection, Zinc finish

                           No. 90M ZN REVERSE
                           Same as 90M ZN 45 except
                           with reversed bolt




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
288                                                                                                                   800-821-3520
                                                           www.austinhardware.com

End Bolts

Finger Bolts
No. 565697
For use on double doors. Where one door has a more secure
latching/locking mechanism, one of these finger bolts is placed at the
interior top of the other “inactive” door.

No. 17-565697 with 7 lb. spring.




                                                                                                                        LOCKS, LATCHES & CATCHES
No. 11-565697
Same as No. 565697 except bolt is reversed.

No. 19-565697
Same as 11-565697 except with 7 lb. spring, Zinc finish.

No. 14-565697 with 15 lb. spring.




No. 2-565697 Offset




                                                   NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                 289
                                                                                      www.austinhardware.com

                           End Bolts

                           No. 97 ZN SP13/16” Offset
                           Offset latch with 13/16” offset. For use with cable, comes
                           complete with screw and washer to hole cable in place
LOCKS, LATCHES & CATCHES




                           No. 10-5597 ZN
                           This is a flush cable latch, it also comes with screw and washer. These
                           can be used in applications where the vibration of a rod is not wanted.
                           Austin also sells pre-stretch aircraft stainless steel cable and crimps.




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
290                                                                                                                    800-821-3520
                                                            www.austinhardware.com

Slam Latches

No. 709-S-0 ZN
Made of Zinc-plated steel




Spring Latches

No. 2595
Locks open and close quickly with a twist of the bolt. Self-Aligning bolt
makes closing a cinch. Coil spring makes the latch self-closing. Made
from Zinc-plated steel, 11 gauge material with 1/2” diameter bolt.




                                                                                                                         LOCKS, LATCHES & CATCHES
No. 2695 SS
Made from 304 stainless steel




End Bolts

No. 565692U-25
Tapered bolt, 25 lb. spring
includes strike plate with
holes for #10 screws,
Zinc finish

No. 565692-50-25
Same as 565692U-25
less strike plate




                                                    NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                 291
                                                                                      www.austinhardware.com

                           Rods and Rod Guides

                           No. ROD38-32F-S-1
                           Flat Rod, 38˝ L x 1/2˝ W with
                           (1) 1/2˝ x 1/4˝ slot, Zinc finish

                           No. 8700
                           Same as ROD38-32F-S-1 except 30˝ L




                           No. 5611-6X-25                                                                                    No. 5611-6X
                           Round Rod, 34-3/16˝ L x 5/16˝ dia. with one flat end,
                           approximately 3-1/8˝ L and a 1/4˝ dia. hole, Zinc finish
LOCKS, LATCHES & CATCHES




                           Also available in 48” lengths

                           No. 105-6X-36 ZN266                                                                               No. 105-6X
                           Round Rod, 36˝ L x 3/8˝ dia.
                           with 1-3/8˝ L x 9/16˝ W flat end,
                           (1) 17/64˝ dia. hole, Zinc finish

                           No. 105-6X-36 SS
                           Same as 105-6X-36 ZN266 except in Stainless steel

                           No. 105-6X-48 ZN266
                           Round Rod, 48˝ L x 3/8˝ dia. with 1-3/8˝ L x 9/16˝ W flat end,
                           (1) 17/64˝ dia. hole, Zinc finish

                           No. 105-6X-48 SS
                           Same as 105-6X-48 ZN266 except in Stainless steel




                           No. 94-6X-36 ZN
                           Round Rod, 36˝ L x 1/4˝ dia., bent 90° at one end, Zinc finish




                                                                               NOTE: All items depicted in this catalog are for reference only.

                                                               CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
292                                                                                                                    800-821-3520
                                                 www.austinhardware.com

Rods and Rod Guides

No. ALH 105-54 ZN
Rod Guide for 3/8˝ dia. rods,
Zinc finish

No. ALH 105-54 SS
Stainless steel




                                                                                                                       LOCKS, LATCHES & CATCHES
                                                         WHENTHE
                                            JOB DEMANDS THE RIGHT
                                               HARDWARE FAST,CALL
                                    THE ONE TEAM THAT STOCKS EVERY
                                 PRODUCT AND ALWAYS SHIPS ONTIME.
                                CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                   800-821-3520                                        293
                                                                                       www.austinhardware.com

                           Refrigerator Locks
                           No. 502 Refrigerator Lock
                           Body, case is stainless steel, bolt malleable iron. Adjustable roller strike. Padlock hole in body. Flush strike, flush to 3/8” offset. Offset
                           1/2” to 1-1/4” offset. Chrome plated finish. Drilled and countersunk for No. 10 screws.

                           No. 502-50 SS
                           No. 502-51 SS 0
                           No. 502-51 SS F
                           No. 502 SS




                           No. 503 Refrigerator Lock with Inside Release
                           All brass with high luster chrome plating. May be padlocked. Available from flush to 1-3/8” offset. Specify offset required. Adjustable
LOCKS, LATCHES & CATCHES




                           roller strike allows perfect seal and prevent loss of refrigeration. Holes drilled and countersunk for 1/4” screws.




                           No. 5031
                           Same as above, except material is all
                           malleable iron construction. Available
                           from flush to 1-3/8” offset. Specify
                           offset required.




                                                                              Dimensional drawing for both No. 503 and No. 5031


                           No. 5032 Inside Release
                           1/2” Round steel cast iron, inside mounting plate and push knob.
                           Length 8”. Finish: Zinc

                           Included with both No. 503 and No. 5031 above.




                                                                                NOTE: All items depicted in this catalog are for reference only.

                                                             CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
294                                                                                                                     800-821-3520
                                                               www.austinhardware.com

Latches

Heavy Duty Hook Clamp
No. HR-9X
A typical application for this clamp is its use as a fastening
device for heavy construction equipment. HR-9X is made
with four holes for attachment and clamp.
The closing force is rated at 275 lbs. HW-11 heavy duty
clamps are available with locking locks on special request.

Uses No. HS-14 striker.

                                           5/8”
                                  5/16”

                                                1”


                                           1-1/8”           .078”



No. HR-1
Overcenter Clamps




                                                                                                                                                                      LOCKS, LATCHES & CATCHES
Hook Type - H Series
These are of general purpose resilient design. The type of base, described
below, determines the clamp catalog number. The simple toggle-action
mechanism, with a high-tensile alloy steel spring, provides a combination
which operates easily, holds better, and is ideal for most simple fastening
operations. The high-tensile spring exerts a closing force of 50 t0 75 lbs.
Made of steel and is Zinc Plated.




No. HR-2                                                                                 Hinge Type - D Series
is similar to HR-1 except the finger area for lifting is                                 Ideal for use as a clamp-hinge combination, the D series allows trouble-
reversed. This latch is made of Stainless Steel.                                         free opening and secure fastening on either side of the container by weld
                                                                                         or rivet, and is used as a hinge in the closed position. Force of 50 to 75
                                                                                         lbs. is exerted.

                                                                                         No. DR-32
                                                                                         Clamp




No. HS-11                                                                                No. DH-39
                                                                                         Striker




                                                       NOTE: All items depicted in this catalog are for reference only.

                                    CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                               800-821-3520                                                           295
                                                                              www.austinhardware.com

                           Latches

                           No. HC227
                           Zinc-plated with holes

                           No. C227
                           Plain, no holes

                           Strikers included with above




                           No. HC204 ZN                                                                 No. HC201 ZN
LOCKS, LATCHES & CATCHES




                           Zinc-plated with holes                                                       Zinc-plated with holes

                           No. HC 204 SS                                                                No. HC 201 SS
                           Stainless steel with holes                                                   Stainless steel with holes

                           No. C204 PL                                                                  No. C201 PL
                           Plain, no holes                                                              Plain, no holes

                           Strikers included with above numbers




                           No. HC224
                           Zinc-plated with holes

                           No. C224
                           Plain, no holes

                           Strikers included with above numbers




                                                                       NOTE: All items depicted in this catalog are for reference only.

                                                          CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
296                                                                                                            800-821-3520
                                                            www.austinhardware.com

Latches

No. HC207 ZN                            No. C207 PL
Zinc-plated with holes                  Plain, no holes

No. HC207 SS                            No. HC207 AL
Stainless steel with holes              Aluminum with holes




Strikers included with above numbers.
Dimensions are to center lines of attaching holes. Size of fastening holes
as shown are standard. Locating the catch members in the dimensional
relation as shown provides a contact. For firm draw-up tension and secure
holding, place members further apart (to the extent necessary) for desired
functional action and tension.


Miniature Compression Spring Catch
No. VHC340-42 with holes
Stainless steel striker included.
This clamp has a preload strength of 12 lbs., 1/16” deflection and 18 lbs.




                                                                                                                                  LOCKS, LATCHES & CATCHES
tension. 4 CTSK hole for No. 2 F.H.S. = 82˚ to .172. Stainless steel
commercial type 302 with passivated finish.




No. HC210 ZN                                                                          Compression Spring Catch with Padlock Eye
Zinc-plated with holes                                                                No. HC83314SS with holes
                                                                                      Striker included
No. C210 PL
Plain, no holes

No. HC210 SS
Stainless steel with holes
Strikers included with above numbers.




                                                                                      No. HC83314SS
                                                                                      Stainless steel catch without padlock eye
                                                                                      Striker included




                                                    NOTE: All items depicted in this catalog are for reference only.

                                 CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                          297
                                                                                        www.austinhardware.com

                           Latches

                           Compression Spring Catches
                           No. SC-D-20649 Zinc
                           No. SC-D-20648 Zinc
                           Same as SC-D-20649 except A Dimension is 2-1/6”
                           Available in Stainless Steel, Striker included

                           These catches are pre-loaded to 70 lbs.
                           Application with holes of catch and strike
                           spaced 2-15/16” apart, and with springs
                           compressed 1/8”.

                           Provides a holding tension of 100 lbs.
                           Catch withstands 1,000 lb. pull test
                           before complete failure.
LOCKS, LATCHES & CATCHES




                           Adjustable Catch
                           No. HC 1046
                                                                                                                                      All parts steel except base;
                           No. HC 1046-NL                                                                                             zinc-plate with clear chromate
                           (no padlock eye)
                                                                                                                                         Padlock eye turns to hold lever
                                                                                                                                         firmly against release
                           No. HC 1046 ZN
                           Striker included




                           Draw bolt action to 1,000 lbs.
                           Ultimate strength 1,500 lbs.


                           No. HC-227-20648
                           Catch .144 dia. holes                                                                                                                           Strike




                           No. SC-D-20650-27
                           Strike .159 dia. holes
                           Lever and base made of SAE 1010 cold roll steel; spring links of type
                           302 stainless steel; pins (heat treated) type 416 stainless steel; and
                                                                                                                                                                           Catch
                           strike is of SAE 1010 cold roll steel.

                           Finish of lever, base and pins is zinc-plated; links are passivate.                                                                                Application Graph
                                                                                                                                                                                     and
                                                                                                                                                                               Holding Tension

                                                                                 NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
298                                                                                                                      800-821-3520
                                                            www.austinhardware.com

Latches

No. HC 5000                                                                           No. HC 255 ZN
Available in stainless steel and zinc.                                                Spring temper steel .375 dia. gage pin




                                                                                                                               LOCKS, LATCHES & CATCHES
Over Center Adjustable Draw Latch                                                     No. 750
No. 750 ZN
Ideal for use on heavy gasketed lids. 1/2” adjustment allows for variations
in alignment. 1/2” take-up capability. Slim profile. Provision for use of a
lockwire to prevent tampering. Material is carbon steel.

No. 750-P
Padlockable version

No. 750SS
302 stainless steel.

No. 750-10
Keeper, offered separately.
Material is carbon steel.

No. 750-10SS
302 stainless steel.



                                                       No. 750-10




No. 750-P




                                                           No. 750


                                                    NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                            800-821-3520                       299
                                                          www.austinhardware.com

                           Latches

                           No. V35
                           No. V36




                                                                                                                                   Draw Hasp - Standard
                                                                                                                             Catalog
                                                                                                                             Number     Description
                                                                                                                              V35       2-3/4” zinc-plated
                                                                                                                              V35       4” zinc-plated
                                                                                                                              V35       5” zinc-plated
                                                                                                                              V35       5-3/4” zinc-plated
LOCKS, LATCHES & CATCHES




                                                                                                                              V35       2-3/4” bright brass
                                                                                                                              V35       4” satin black
                                                                                                                              V35       5” satin black
                                                                                                                              V36       2-3/4” stainless steel
                                                                                                                              V36       4” stainless steel
                                                                                                                              V36       5” stainless steel




                           No. V35L                                                 No. V35L
                           Zinc 5”                                                  Zinc 5-3/4”




                                                                                                              Draw Hasp w/ Keyed Built-in Lock
                                                                                                              Catalog
                                                                                                              Number    Description
                                                                                                               V35L     5” zinc-plated
                                                                                                               V35L     5-3/4” zinc-plated




                                                   NOTE: All items depicted in this catalog are for reference only.

                                      CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
300                                                                                        800-821-3520
                                                      www.austinhardware.com

Latches

Locking
No. 9-00285
This latch offers a padlocking feature
along with its take-up capabilities.
This makes the latch an ideal choice
when more security is required. The
latch can be used to hold lids, hoods
and doors from vibration or rattles.
It also helps to keep out dust.

To latch, simply position the wire
bale over the hook and press down
on the lever. A padlock can now be
inserted through the hole, preventing
the lever from being lifted.

Latch and hook are zinc-plated car-
bon steel and are furnished com-
plete. Recommended fasteners (#10
flat head screws) must be supplied
by customer.




                                                                                                                         LOCKS, LATCHES & CATCHES
Key-Locking
No. RN23200-01
This draw latch combines panel
take-up capabilities with the added
security of a key-locking tumbler
mechanism! Holds lids, hoods and
doors secure from vibration or rat-
tle and helps to keep out dust. To
latch, simply position the wire bale
over the hook and press down on
the lever. The key-locking feature
can then be used to assure security
without the need of any other lock-
ing device. However, a seal hole is
provided if evidence of tampering is
desired.

Latch assembly and hook are zinc-
plated carbon steel. Key cylinder
body is a zinc-die casting.
Furnished complete with two keys
and hook. Recommended fasten-
ers (#10 flat head screws for latch
and #10 round or pan head screws
for hook) must be supplied by cus-
tomer. Available keyed-alike or ran-
dom keyed.




                                              NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                      800-821-3520                       301
                                                                                                  www.austinhardware.com

                           Latches

                           No. 35 ELS
LOCKS, LATCHES & CATCHES




                           No. 9674AU
                           Specifications
                           Bearing plates ...................................1-1/2” x 2-1/4”
                           Finger loop........................................1”
                           Proj. hood plate catch.......................1-1/4”
                           Dia. barrel .........................................7/8”
                           Maximum spring compression .........3/4”
                           Weight: .88 lbs.
                           Finish: Plated




                           The distance between edges of the hood catch and the base plate,
                           necessary to produce the above-noted spring-compression, is 4”


                           No. 9660-U
                           Spring-loaded latches used for keeping light hinged panels
                           firmly in place and to minimize the chances of rattling in
                           an installation where vibration is a consideration.
                           Weight: .25 lbs.
                           Finish: Plated




                                                                                       NOTE: - 6# pull to start;
                                                                                             - 26# pull at 1/2” travel.




                                                                                           NOTE: All items depicted in this catalog are for reference only.

                                                                     CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
302                                                                                                                                800-821-3520
                                                                        www.austinhardware.com

Latches

No. 9643U
Specifications
Frame bearing..................................3/4” x 2-1/16”
Rise to hook.....................................3-1/2”
Finger hook......................................1-1/2”
Bearing hood plate...........................2” x 2”
Proj. hood plate catch......................1-5/8”
Weight: .56 lbs.
Finish: Plated




                                                                                                                                   LOCKS, LATCHES & CATCHES
No. 9663-U
Has foot plate in line with barrel. Other variations
as noted in engineering drawings.
Weight: .31 lbs.




                                                                                 NOTE: - 10# pull to start;
                                                                                       - 28# pull at 1/2 travel.




No. 9688-BU                                                                                       No. 9689VU
Specifications
Upper bearing plate ..........................1-3/4” x 2-5/8”
Lower bearing plate ..........................7/8” x 2-7/8”
Finger loop........................................1”
Proj. hood plate catch.......................1-1/4”
Diameter barrel .................................1”
Max. spring compression .................1-1/8”
Weight: 1.5 lbs.
Finish: Zinc plated




The distance between mounting surface of base and
lower edge of the hood catch, necessary to produce
above-noted spring compression, is 7-5/8”.

                                                                NOTE: All items depicted in this catalog are for reference only.

                                        CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                                        800-821-3520               303
                                                                                     www.austinhardware.com

                           Latches
                           No. 50208                                                                           No. 50209
                           Snug-Fit fastening without a rattle. Especially manu-
                           factured for heavy duty fastening for use on hoods,
                           battery box covers, access panels.




                           Bracket Hardware for Part Numbers 50208 & 50209
LOCKS, LATCHES & CATCHES




                                     No. 12002                              No. 12004                                        No. 12003                                    No. 12001



                                                                                               No. 028-112
                                                                                               Cross pin and nut for mounting fastener to anchor bracket - not shown.

                                    No. 028-112


                           Rubber Hood Fastener                             Complete with brackets for vertical or horizontal                     Will not scratch painted surfaces. Easily installed
                                                                            mounting. Brackets zinc-plated; impervious to                        flexible rubber catch compensates for
                           No. 35R                                          weather, oils, chemical and dirt. No mechanical                      misalignment.       Never requires lubrication.
                           Regular size holddown and
                                                                            parts to wear; no springs to stretch out of shape.                   Individually packaged.

                           No. 35RS
                           Mini size holddown




                                                                               No. 35R                                                                                     No. 35RS
                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
304                                                                                                                   800-821-3520
                                                           www.austinhardware.com

Latches

No. WJ-97                                                                           No. WJ-98
3-hole mounting base.                                                               2-hole mounting base.




Steel, black enamel finish,
with single horn handle horizontal and vertical mounting position.




                                                                                                                         LOCKS, LATCHES & CATCHES
Hood Latches                                                                         No. 35-M (medium)
Stainless steel fittings available                                                   2.7 oz. (77.1 grams)
Durable rubber with zinc-plated fit-
tings. Comes in 3 different sizes for
each customer’s particular application.




      No. 35-L                   No. 35-M                No. 35-S

No. 35-S (small)                                                                     No. 35-L (large)
1.2 oz. (36.2 grams)                                                                 3.2 oz. (90.7 grams)




                                                   NOTE: All items depicted in this catalog are for reference only.

                                  CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                           800-821-3520                  305
                                                                                           www.austinhardware.com

                           Latches
                           No. WJ-100
                           Sturdy, die-formed steel. For a variety of truck, off-
                           road equipment, and industrial applications.
                           Particularly adaptable to use on air compressors
                           and engine compartments. Black enamel finish.


                           No. WJ-95
                           Chrome plated


                           No. WJ-91
                           Stainless steel
                           Curved 2-5/8” handle for easy
                           grip. 5/8” diameter steel shaft.
                           Overall length 3-1/4” in free
                           position.

                           Spring tension increased by
                           mounting holder up to 1” over
                           free position for maximum tight
LOCKS, LATCHES & CATCHES




                           latch. 15° clearance angle in
                           open position. Black enamel
                           finish standard; available in
                           chrome plate.

                           No. WJ-90
                           Catch Plate
                           Stainless steel




                           No. WJ-92
                           Stainless steel

                           No. WJ-94
                           Chrome plated

                           No. WJ-96
                           Black enamel finish

                           No. WJ-90
                           Stainless steel catch plate

                           No. WJ-93
                           Chrome plated catch plate




                           No. WJ-99
                           Black enamel catch plate




                                                                                    NOTE: All items depicted in this catalog are for reference only.

                                                              CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
306                                                                                                                         800-821-3520
                                                             www.austinhardware.com

Latches

No. 930
Rated up to 1,500 Lbs.
This latch is designed for use in a wide variety of applications. Its self-
adjusting, stainless steel tension springs help maintain balanced load
forces. Padlock eye provides for up to a 3/8” diameter padlock shackle.
No. 9674-3B Striker sold separately. Up to 7/16” U-bolt adjustment.




                                                                                                                          LOCKS, LATCHES & CATCHES




                                                     NOTE: All items depicted in this catalog are for reference only.

                                   CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
                                                                                             800-821-3520                 307
                                                                                     www.austinhardware.com

                           Latches

                           No. 960 (Patent Pending)
                           8,000 Lbs. Maximum Load Rating
                           This extra-heavy duty draw latch can be used in a wide variety of applications. It offers strength and durability, and is rated at 8,000 Lbs. maximum
                           pull. Features up to 1” loop length adjustment. Safety thumb release helps ensure full locked engagement; provides a padlock eye for up to a 3/8”
                           diameter padlock shackle, and stainless steel torsion spring automatically retracts the loop to prevent damage when not in use.
                           Body parts are E-coat finished; fasteners, loop and thumb release are zinc.
                           Weight: 6.9 Lbs. each. Hook not included.
LOCKS, LATCHES & CATCHES




                                                                              NOTE: All items depicted in this catalog are for reference only.

                                                            CALIFORNIA • GEORGIA • IDAHO • INDIANA • MISSOURI • PENNSYLVANIA • TEXAS • WISCONSIN
308                                                                                                                   800-821-3520

								
To top