Docstoc

PolishTools qxd

Document Sample
PolishTools qxd Powered By Docstoc
					Polishing Equipment and Tools
      From The Company
     You Know and Trust




        (800) 321-5336
         diamondproducts.com
                                     Making Counter Tops and Floors Shine
Diamond Products is proud to introduce its new line of polishing tools and equipment designed to
bring a shine to concrete surfaces. This is the right product line to help you take advantage of the
                     growing decorative market and really boost your profit.


    DS 175 7" Polisher For Use With 3" Pads
                                                                                   Grinds, hones, polishes and cleans steps,
                                                                                   counter tops, floor edges and hard to reach areas.
                                                                                   Scratch removal, surface restoration or
                                                                                   preparation is fast, easy and perfectly flat.
                                                                                   Three discs spin as they rotate around the center at
                                                                                   the same speed as the driver.
                                                                                   Driven by a variable speed Makita power unit
                                                                                   operating at 2500 to 4700 rpm. Drive unit may be
                                                                                   attached over the platform or outside the platform
                                                                                   to reach under toe kicks.
                                                                                   System may be used wet with a slurry skirt (use
                                                                                   a GCFI) or dry. A vacuum port is provided.




                                                                                               Specifications - DS 175
                                                                                      Part No.               5800977
                                                                                      Catalog No.            47008
                                                                                      Driver Speed           2,500 to 4,700 RPM
                                                                                      Platen Speed           2,500 to 4,700 RPM
                                                                                      Platform Speed         400 to 800 RPM
                                                                                      Spindle Required       5/8-11 or 14-2 mm
                                                                                      Tool Size:             7"
                                                                                      Weight                 13 lbs.
                                                                                      DS 175 Includes: Power unit, handle, tool support
                                                                                      assembly, vacuum port, velcro slurry skirt and
                                                                                      coolant feed.




                                         The Step-By-Step Polishing Process
               Each set of three pads (listed below) represents a step in a 7 step process to take your
              material from a rough to a highly polished, glossy finish. You decide the finish you want!
                                                      3" Resin Polishing Pads
    STEP #               Description - Grit                               Part #          Cat. #       Finish
      1      3" Wet 50 Grit Heavy Duty Resin Polishing Pad (set of 3)     AS-DPC30053PK   47387        Heavy Material Removal
      2      3" Wet 100 Grit Heavy Duty Resin Polishing Pad (set of 3)    AS-DPC30103PK   47394        Medium Material Removal
      3      3" Wet 200 Grit Heavy Duty Resin Polishing Pad (set of 3)    AS-DPC30203PK   47446        Fine Grinding, Skin Removal
      4      3" Wet 400 Grit Heavy Duty Resin Polishing Pad (set of 3)    AS-DPC30403PK   47458        Fine Honing
      5      3" Wet 800 Grit Heavy Duty Resin Polishing Pad (set of 3)    AS-DPC30803PK   47459        Beginning Polish
      6      3" Wet 1500 Grit Heavy Duty Resin Polishing Pad (set of 3)   AS-DPC31503PK   47397        Gloss
      7      3" Wet 3000 Grit Heavy Duty Resin Polishing Pad (set of 3)   AS-DPC33003PK   47408        Mirror Finish

2
       Portable DS 301 Planetary Hand Polisher
  Rugged, hand-operated 12-inch platform that
  grinds, hones, and polishes concrete surfaces
 Uses three 5” diamond polishing pads and
 diamond grinding discs.
  Operates wet or dry (with use of optional cowl).
  Planetary, gear-driven tool.
  12" platform turns at a lower rate than the
  higher rotational speed (> 2000 rpm) of the
  5" platens.
  This rpm provides the best speed for
  diamond polishing, producing a perfect finish
  5 times faster than a single head polisher.
  Unit is powered by a heavy duty FEIN
  variable speed polisher.
  Center coolant feed
  Precision bearings
  Sturdy construction




           Specifications - DS 301
       Part No.             5800976
       Catalog No.          47007
       Power                115V/60Hz
       Current              10.5 Amps
       Driver Speed         900 to 2700 rpm
       Platform Speed       150 to 450 rpm
       Platen Speed         750 to 2250 rpm
       Weight               25 lbs.
       Shipping Weight      32 lbs
       Slurry Skirt         Included
       Coolant Feed         Included

                                                          Optional Dust Cowl
                                                         with 1" Vacuum Port
                                                             Part #: 6041310


                                    The Step-By-Step Polishing Process
             Each set of three pads (listed below) represents a step in a 7 step process to take your
            material from a rough to a highly polished, glossy finish. You decide the finish you want!

             5" Diamond Grinding Discs and Resin Polishing Pads - 7 STEP PROCESS
STEP #                   Description - Bond                       Part #          Cat #   Finish
   1       5” Wet Diamond Grinding Disc - T33S5060                CGST512SP3PK    47077   Medium Removal (50/60 grit)
           (recommended as a starting point for countertops)
   2       5" Wet 50 Grit Resin Polishing Pad (set of 3)          AS-DPC50503PK   47366   Medium Material Removal
   3       5" Wet 100 Grit Resin Polishing Pad (set of 3)         AS-DPC50103PK   47374   Fine Grinding, Skin Removal
   4       5" Wet 200 Grit Resin Polishing Pad (set of 3)         AS-DPC50203PK   47375   Fine Honing
   5       5" Wet 400 Grit Resin Polishing Pad (set of 3)         AS-DPC50403PK   47379   Satin Finish
   6       5" Dry 800 Grit Resin Polishing Pad (set of 3)         AS-DPC50803PK   47380   Polish Gloss
   7       5" Dry 1500 Grit Resin Polishing Pad (set of 3)        AS-DPC51503PK   47384   Near Mirror Finish
Optional   5” Dry 3000 Grit Resin Polishing Pad (set of 3)        IN-C5R300       62919   Mirror Finish


                                                                                                                        3
                    Portable DS 301HD Heavy Duty
                       Planetary Hand Polisher

                                                                                             More
                                                                                            Power
                                                                                        Means Greater
                                                                                          Production
                                                                                        When Polishing
                                                                                         Countertops,
                                                                                          Floors and
                                                                                            Edges!

                                                                               Extra heavy duty version of the DS301
                                                                               Rugged, hand-operated 12-inch platform that
                                                                               grinds, hones, and polishes concrete surfaces
                                                                               Uses three, 5” diamond polishing pads or cup
                                                                               wheels.
                                                                               Operates wet or dry (with use of optional cowl).
                                                                               Planetary, gear-driven tool.
                 Specifications - DS 301HD                                     Fixed 3000 RPM platen speed
              Part No.                5800981                                  This rpm provides the best speed for
              Catalog No.             62879                                    diamond polishing, producing a perfect finish
              Power                   115V/60Hz                                8 times faster than a single head polisher.
              Current                 15 Amps                                  Unit is powered by a heavy duty Makita
              Driver Speed            6,000 RPM                                motor.
              Platform Speed          3,000 RPM
                                                                               Center coolant feed
              Platen Speed            600 RPM
                                                                               Precision dual bearings
              Weight                  40 lbs.
              Shipping Weight         45 lbs                                   Built-in vacuum port
              Slurry Skirt            Included
              Coolant Feed            Included




                                    The Step-By-Step Polishing Process
             Each set of three pads (listed below) represents a step in a 7 step process to take your
            material from a rough to a highly polished, glossy finish. You decide the finish you want!

             5" Diamond Grinding Discs and Resin Polishing Pads - 7 STEP PROCESS
STEP #                 Description - Bond                      Part #           Cat #         Finish
    1      5” Wet Diamond Grinding Disc - T33S5060             CGST512SP3PK     47077         Medium Removal (50/60 grit)
           (recommended as a starting point for countertops)
   2       5" Wet 50 Grit Resin Polishing Pad (set of 3)       AS-DPC50503PK    47366         Medium Material Removal
   3       5" Wet 100 Grit Resin Polishing Pad (set of 3)      AS-DPC50103PK    47374         Fine Grinding, Skin Removal
   4       5" Wet 200 Grit Resin Polishing Pad (set of 3)      AS-DPC50203PK    47375         Fine Honing
   5       5" Wet 400 Grit Resin Polishing Pad (set of 3)      AS-DPC50403PK    47379         Satin Finish
   6       5" Dry 800 Grit Resin Polishing Pad (set of 3)      AS-DPC50803PK    47380         Polish Gloss
   7       5" Dry 1500 Grit Resin Polishing Pad (set of 3)     AS-DPC51503PK    47384         Near Mirror Finish
Optional   5” Dry 3000 Grit Resin Polishing Pad (set of 3)     IN-C5R300        62919         Mirror Finish


4
 DS 302 12" Single Head Walk Behind Polisher
 Rugged, 2 HP walk-behind floor version of the DS 301 with a
12-inch platform that grinds, hones, and polishes concrete
surfaces
 Uses three 5" diamond polishing pads or cup wheels.
 Driven by 2 HP Baldor motor and controller.
 Controller may be easily programmed for 110V or 220V
 input power.
 Ideal for use in tight areas, edging under toe kicks, steps and floor
 surfaces up to 1,000 square feet.
 Has enough power to grind with heavy duty diamond
 grinding wheels and enough speed for fast polishing.
 Additional weight up front (up to 50 lbs) may be added for
heavy grinding. (weight included)
 Slurry skirt, center coolant feed and 1" vacuum port included.



                 Specifications - DS 302
      Part No.          5800975
      Catalog No.       47006
      Voltage           115V +/- 15% or 230V +/- 15%
      Current           20 Amps or 10 Amps
      Frequency         60Hz or 50Hz +/- 10%
      Controller        Baldor H2 enclosure,
                        inverter controlled
                        constant torque
      Motor             Baldor 2 HP
      Power Cord        50' 10 gauge
      Hose              50' w garden hose adapter
      Slurry Skirt      Velcro
      Platen            Three 5" floating heads
      Platen Speed      250 to 2500 rpm
      Platform speed    50 to 500 rpm
      Path width        12" (300mm)
      Vacuum port       1"
      Clearance         3.5" vertical, 0" to wall
      Wheel Axle        Vertically adjustable
      Weight            150 lbs.
      Additional Weight 50 lbs (included)
      Shipping Weight 235 lbs




        STEP #1 shown below offers 6 different options for grinding discs to allow the appropriate grit
                                    to match your specific application.
            5" Diamond Grinding Discs and Resin Polishing Pads - 7 STEP PROCESS
STEP #                 Description - Bond                                Part #          Cat #   Finish
  1       5” Wet Diamond Grinding Disc - T33S2530 (6 Segs)               CGST56SP3PK     62886   Hard Epoxy Grinding (25/30 grit)
  1       5" Wet Diamond Grinding Disc - T33S2530                        CGST512SP3PK    57162   X-Tra Heavy Removal (25/30 grit)
  1       5" Wet Diamond Grinding Disc - T33S4050                        CGST512SP3PK    60646   Heavy Removal (40/50 grit)
  1       5” Wet Diamond Grinding Disc - T33S5060                        CGST512SP3PK    47077   Medium Removal (50/60 grit)
  1       5” Wet Diamond Grinding Disc - T33S80100                       CGST512SP3PK    47082   Fine Grinding (80/100 grit)
  1       5” Wet Diamond Grinding Disc - T33S140170                      CGST512SP3PK    60652   X-Tra Fine Grinding (140/170 grit)
  2       5" Wet 50 Grit Resin Polishing Pad (set of 3)                  AS-DPC50503PK   47366   Medium Material Removal
  3       5" Wet 100 Grit Resin Polishing Pad (set of 3)                 AS-DPC50103PK   47374   Fine Grinding, Skin Removal
  4       5" Wet 200 Grit Resin Polishing Pad (set of 3)                 AS-DPC50203PK   47375   Fine Honing
  5       5" Wet 400 Grit Resin Polishing Pad (set of 3)                 AS-DPC50403PK   47379   Satin Finish
  6       5" Dry 800 Grit Resin Polishing Pad (set of 3)                 AS-DPC50803PK   47380   Polish Gloss
  7       5" Dry 1500 Grit Resin Polishing Pad (set of 3)                AS-DPC51503PK   47384   Near Mirror Finish

                                                                                                                                      5
    DS 602 24" Dual Head 2 HP Walk Behind Polisher
                                                            A twin head version of the DS 302, the 2 HP DS 602 walk behind
                                                            grinder-polisher puts six rotating, floating heads on the surface.
                                                            Planetary design allows ease of operation without the directional pull
                                                            of conventional floor machines.
                                                            Platens operate at ideal grinding and polishing speeds.
                                                            Less weight needed for diamonds to perform which means less power
                                                            required to operate.
                                                            Each planetary unit has three 5" rotating heads (total of 6 on the
                                                            machine), each with a 5/8-11 spindle
                                                            Driven by 2 HP Baldor motor and controller. Controller may be easily
                                                            programmed for 115V or 230V input power.
                                                            For polishing, 5" velcro backup platens allow easy attachment of
                                                            diamond polishing discs.


                                                                                Specifications - DS 602
                                                                        Part No.          5800974
                                                                        Catalog No.       47938
                                                                        Voltage           115V +/- 15% or 230V +/- 15%
                                                                        Current           20 Amps or 10 Amps
                                                                        Frequency         60Hz or 50Hz +/- 10%
                                                                        Controller        Baldor Nema H2 enclosure,
                                                                                          inverter controlled
                                                                                          constant torque
                                                                        Motor             Baldor 2 HP
                                                                        Power Cord        50' 10 gauge
                                                                        Hose              50' w garden hose adapter
                                                                        Slurry Skirt      Velcro/plastic
                                                                        Platten           Six 5" floating heads
                                                                        Platen Speed      250 to 2500 rpm
                                                                        Platform speed    50 to 500 rpm
                                                                        Path width        24" (600mm)
                                                                        Vacuum port       2"
                                                                        Clearance         3.5" vertical, 0" to wall
                                                                        Wheel Axle        Vertically adjustable
                                                                        Weight             255 lbs.
                                                                        Additional Weight 60 lbs (if needed)
                                                                        Shipping Weight 340 lbs
                                                                        Ship Dimensions 48" x 25" x 36" pallet
          Bottom view



        STEP #1 shown below offers 6 different options for grinding discs to allow the appropriate grit
                                    to match your specific application.
           5" Diamond Grinding Discs and Resin Polishing Pads - 7 STEP PROCESS
STEP #               Description - Bond                        Part #                 Cat #      Finish
    1    5” Wet Diamond Grinding Disc - T33S2530 (6 Segs)      CGST56SP3PK            62886      Hard Epoxy Grinding (25/30 grit)
    1    5" Wet Diamond Grinding Disc - T33S2530               CGST512SP3PK           57162      X-Tra Heavy Removal (25/30 grit)
    1    5" Wet Diamond Grinding Disc - T33S4050               CGST512SP3PK           60646      Heavy Removal (40/50 grit)
    1    5” Wet Diamond Grinding Disc - T33S5060               CGST512SP3PK           47077      Medium Removal (50/60 grit)
    1    5” Wet Diamond Grinding Disc - T33S80100              CGST512SP3PK           47082      Fine Grinding (80/100 grit)
    1    5” Wet Diamond Grinding Disc - T33S140170             CGST512SP3PK           60652      X-Tra Fine Grinding (140/170 grit)
    2    5" Wet 50 Grit Resin Polishing Pad (set of 3)         AS-DPC50503PK          47366      Medium Material Removal
    3    5" Wet 100 Grit Resin Polishing Pad (set of 3)        AS-DPC50103PK          47374      Fine Grinding, Skin Removal
    4    5" Wet 200 Grit Resin Polishing Pad (set of 3)        AS-DPC50203PK          47375      Fine Honing
    5    5" Wet 400 Grit Resin Polishing Pad (set of 3)        AS-DPC50403PK          47379      Satin Finish
    6    5" Dry 800 Grit Resin Polishing Pad (set of 3)        AS-DPC50803PK          47380      Polish Gloss
    7    5" Dry 1500 Grit Resin Polishing Pad (set of 3)       AS-DPC51503PK          47384      Near Mirror Finish

6
             Powerful DS 605 24" 5 HP Heavy Duty
               Dual Head Walk Behind Polisher
 An ultra powerful 5 HP twin head walk behind grinder-polisher
 that is 50 pounds heavier than the DS 602. Puts six rotating
 floating heads on the surface backed by 220V single phase
 power (other voltage options available - see specifications).
 Variable speed adjustment knob.
 Uses the same planetary surface system as the DS 602.
 Each planetary unit has 3 rotating heads (total of 6 on
 the machine), each with a 5/8-11 spindle
 For polishing, 5" velcro backup platens allow easy
 attachment of diamond polishing discs.




                  Specifications - DS 605
         Part No.          5800973
         Catalog No.       47914
         Voltage           230V +/- 15%, single phase
         Current           20 Amps
         Frequency         50Hz or 60Hz +/- 10%
         Controller        Baldor H2 enclosure,
                           inverter controlled
                           constant torque
         Motor             5 HP Baldor
         Power Cord        50' 10 gauge
         Hose              50' w garden hose adapter
         Slurry Skirt      Velcro
         Platen            Six 5" floating heads
         Platen Speed      300 to 3000 rpm
         Platform speed    60 to 600 rpm
         Path width        24" (600mm)
         Vacuum port       2"
         Clearance         3.5" vertical, 0" to 0" to wall
         Wheel Axle        Vertically adjustable
         Additional Weight 60 lbs
         Shipping Weight 320 lbs
         Ship Dimensions 48" x 25" x 36" pallet

                                                                                     Bottom view


       STEP #1 shown below offers 6 different options for grinding discs to allow the appropriate grit
                                   to match your specific application.
            5" Diamond Grinding Discs and Resin Polishing Pads - 7 STEP PROCESS
STEP #                 Description - Bond                    Part #          Cat #     Finish
 1        5” Wet Diamond Grinding Disc - T33S2530 (6 Segs)   CGST56SP3PK     62886     Hard Epoxy Grinding (25/30 grit)
 1        5" Wet Diamond Grinding Disc - T33S2530            CGST512SP3PK    57162     X-Tra Heavy Removal (25/30 grit)
 1        5" Wet Diamond Grinding Disc - T33S4050            CGST512SP3PK    60646     Heavy Removal (40/50 grit)
 1        5” Wet Diamond Grinding Disc - T33S5060            CGST512SP3PK    47077     Medium Removal (50/60 grit)
 1        5” Wet Diamond Grinding Disc - T33S80100           CGST512SP3PK    47082     Fine Grinding (80/100 grit)
 1        5” Wet Diamond Grinding Disc - T33S140170          CGST512SP3PK    60652     X-Tra Fine Grinding (140/170 grit)
 2        5" Wet 50 Grit Resin Polishing Pad (set of 3)      AS-DPC50503PK   47366     Medium Material Removal
 3        5" Wet 100 Grit Resin Polishing Pad (set of 3)     AS-DPC50103PK   47374     Fine Grinding, Skin Removal
 4        5" Wet 200 Grit Resin Polishing Pad (set of 3)     AS-DPC50203PK   47375     Fine Honing
 5        5" Wet 400 Grit Resin Polishing Pad (set of 3)     AS-DPC50403PK   47379     Satin Finish
 6        5" Dry 800 Grit Resin Polishing Pad (set of 3)     AS-DPC50803PK   47380     Polish Gloss
 7        5" Dry 1500 Grit Resin Polishing Pad (set of 3)    AS-DPC51503PK   47384     Near Mirror Finish


                                                                                                                            7
    Grinding Discs, Wet and Dry Diamond and Resin Discs
                                                                                  DIAMOND GRINDING DISCS
                                                                    Grinding discs efficiently grind all types of concrete,
                                                          masonry, brick, block and stone. Medium grit used for basic grinding and
                                                         removal. Fine grit used for a smoother finish. Larger grit diamonds (25/30
                                                                & 40/50) can be used for faster initial grind and quicker
                                                                              aggregate exposure as needed.
                                                                                WET RESIN POLISHING PADS
                                                          Hard wet resin polishing pads combine the benefits of resin and its ultra
                                                         smooth finish with the longevity of diamonds. Wet resin discs last up to 4
                                                         times longer than dry discs when used correctly with water. 3” are avail-
                                                         able in 50 through 3000 grits and 5” are available in 50 through 400 grits.
                                                                                 DRY RESIN POLISHING PADS
                                                           Dry resin polishing pads can produce a mirror finish quickly and easily.
                Diamond Grinding Discs                                      Available in 800, 1500 and 3000 grits.




                            Wet Resin Polishing Pads                                            Dry Resin Polishing Pads


                                                         3" Resin Polishing Pads
    STEP #                   Description - Grit                                 Part #          Cat. #    Finish
      1         3" Wet 50 Grit Heavy Duty Resin Polishing Pad (set of 3)        AS-DPC30053PK 47387       Heavy Material Removal
      2         3" Wet 100 Grit Heavy Duty Resin Polishing Pad (set of 3)       AS-DPC30103PK 47394       Medium Material Removal
      3         3" Wet 200 Grit Heavy Duty Resin Polishing Pad (set of 3)       AS-DPC30203PK 47446       Fine Grinding, Skin Removal
      4         3" Wet 400 Grit Heavy Duty Resin Polishing Pad (set of 3)       AS-DPC30403PK   47458     Fine Honing
      5         3" Wet 800 Grit Heavy Duty Resin Polishing Pad (set of 3)       AS-DPC30803PK   47459     Beginning Polish
      6         3" Wet 1500 Grit Heavy Duty Resin Polishing Pad (set of 3)      AS-DPC31503PK   47397     Gloss
      7         3" Wet 3000 Grit Heavy Duty Resin Polishing Pad (set of 3)      AS-DPC33003PK   47408     Mirror Finish

               STEP #1 shown below offers 6 different options for grinding discs to allow the appropriate grit
                                           to match your specific application.
                  5" Diamond Grinding Discs and Resin Polishing Pads - 7 STEP PROCESS
    STEP #                  Description - Bond                               Part #             Cat #      Finish
       1        5” Wet Diamond Grinding Disc - T33S2530 (6 Segs)             CGST56SP3PK        62886      Hard Epoxy Grinding (25/30 grit)
       1        5" Wet Diamond Grinding Disc - T33S2530                      CGST512SP3PK       57162      X-Tra Heavy Removal (25/35 grit)
       1        5" Wet Diamond Grinding Disc - T33S4050                      CGST512SP3PK       60646      Heavy Removal (40/50 grit)
       1        5” Wet Diamond Grinding Disc - T33S5060                      CGST512SP3PK       47077      Medium Removal (50/60 grit)
       1        5” Wet Diamond Grinding Disc - T33S80100                     CGST512SP3PK       47082      Fine Grinding (80/100 grit)
       1        5” Wet Diamond Grinding Disc - T33S140170                    CGST512SP3PK       60652      X-Tra Fine Grinding (140/170 grit)
       2        5" Wet 50 Grit Resin Polishing Pad (set of 3)                AS-DPC50503PK      47366      Medium Material Removal
       3        5" Wet 100 Grit Resin Polishing Pad (set of 3)               AS-DPC50103PK      47374      Fine Grinding, Skin Removal
       4        5" Wet 200 Grit Resin Polishing Pad (set of 3)               AS-DPC50203PK      47375      Fine Honing
       5        5" Wet 400 Grit Resin Polishing Pad (set of 3)               AS-DPC50403PK      47379      Satin Finish
       6        5" Dry 800 Grit Resin Polishing Pad (set of 3)               AS-DPC50803PK      47380      Polish Gloss
       7        5" Dry 1500 Grit Resin Polishing Pad (set of 3)              AS-DPC51503PK      47384      Near Mirror Finish
    Optional    5” Dry 3000 Grit Resin Polishing Pad (set of 3)              IN-C5R300          62919      Mirror Finish


8
Additional Wet and Dry Polishing Pads
                  Dry Concrete Polishing Pads                                      Dry pads can be used on all
                                                                                  machines, designed only when
Description                                 Part #        Cat #        Cat #          water is not possible
                                                          (single)     (3-Pack)
5”   Dry   Concrete         -   100 grit    IN-C5R010     62894        58198
5”   Dry   Concrete         -   200 grit    IN-C5R020     62897        58180
5”   Dry   Concrete         -   400 grit    IN-C5R040     62910        58199
5”   Dry   Concrete         -   800 grit    IN-C5R080     62916        58209
5”   Dry   Concrete         -   1500 grit   IN-C5R150     62918        58211
5”   Dry   Concrete         -   3000 grit   IN-C5R300     62919        58212



                     Wet Marble Polishing Pads
Description                                 Part #        Cat #        Cat #
                                                          (single)     (3-Pack)
5”   Dry      Marble    -   70 grit         AT-GP5007     62926        57997
5”   Dry      Marble    -   120 grit        AT-GP5012     62943        58001
5”   Dry      Marble    -   220 grit        AT-GP5022     62949        58005
5”   Dry      Marble    -   400 grit        AT-GP5040     62950        58006
5”   Dry      Marble    -   600 grit        AT-GP5060     62967        58010
5”   Dry      Marble    -   800 grit        AT-GP5080     62992        58012
5”   Dry      Marble    -   1800 grit       AT-GP5180     62999        58013
5”   Dry      Marble    -   3500 grit       AT-GP5350     63034        58018


                     Wet Granite Polishing Pads
Description                                 Part #        Cat #        Cat #
                                                          (single)     (3-pack)
5”   Dry      Granite   -   50 grit         DD-ST5005     63085        58043
5”   Dry      Granite   -   100 grit        DD-ST5010     63089        58046
5”   Dry      Granite   -   200 grit        DD-ST5020     63095        58053
5”   Dry      Granite   -   400 grit        DD-ST5040     63099        58055
5”   Dry      Granite   -   800 grit        DD-ST5080     63129        58056
5”   Dry      Granite   -   1500 grit       DD-ST5150     63130        63077
5”   Dry      Granite   -   3000 grit       DD-ST5300     63145        58057



                                Hand Polishing Pads
                                                                                     Grit   Finish
Description                                   Part #      Cat #       Cat #          70     Medium removal
                                                          (single)    (3-pack)       120    Medium skin removal
2”   x   4”   hand   pad        70 grit       AT-HP21     63173       58024          220    Find skin removal
2”   x   4”   hand   pad        120 grit      AT-HP22     63183       58031          400    X-tra fine finish
2”   x   4”   hand   pad        220 grit      AT-HP23     63187       58032          800    Gloss finish
                                                                                     1800   Polished finish
2”   x   4”   hand   pad        400 grit      AT-HP24     63188       58216
2”   x   4”   hand   pad        800 grit      AT-HP26     63209       58035
2”   x   4”   hand   pad        1800 grit     AT-HP27     63216       58037




 Rubber Velcro Backup Pads (sold individually)
Description                                      Part #              Cat #
3” Rubber Velcro backup pad                      BP-DT358            63228
4” Rubber Velcro backup pad                      BP-DT458            63246
5” Rubber Velcro backup pad                      BP-DT558            63247

                                                                                                                  9
      Edge Pro Counter-Top Edging Machine
                                                                           Perfectly straight or curved edges
                                                                           Precision vertical adjustments
                                                                           Uses industry standard diamond router bits
                                                                           Heavy duty roller system for easy motion
                                                                           Reliable and inexpensive

                                                                                  EDGE PRO Specifications
                                                                               Power              1.725 Kw
                                                                               Voltage            115 V - 60 Hz
                                                                               Current            15 Amps
                                                                               Speed Range        10,000 rpm
                                                                               Tool Weight        75 lbs.
                                                                               Shipping Weight 78 lbs.
                                                                               Part Number        6041311
                                                                               Catalog Number 58312

  The EDGE PRO portable edging system is a milling machine that glides over a flat surface producing a perfect edge
detail. A slab guide provides accurate tracking of straight edges and also serves as a tool guard and coolant diversion.
The slab guide may be removed in order to follow curves using the bearing attached to the router bit. The EDGE PRO is
   powered by a standard variable speed router requiring only 110 volt electricity. No special transformer or 220 volt
            power is needed to operate the system, making the EDGE PRO truly portable and jobsite friendly.


                          Full bullnose bit



                                                                      Platform

                                                1-1/2” 45 degree
                                                                                                     Slab


                                                                     Slab Guide
                                    Ogee


                    Edge Pro Router Bits
            Description                             Cat #
            3/4” demi bull router bit               58324
            1-1/2” full bull nose router bit        58338
                                                                      Platform
            3/4” ogee                               58342
            3/4” 45-degree bevel router bit         58347
            1-1/2” 45-degree bevel router bit       58348
            1/2” straight shank adapter             65476                                             Slab

                                                                    Bearing                        Table Edge or
               RPM Settings for Router Bits                                                        Template
           Select the proper speed for the material.
           Remember that each material is different.
                    When in doubt go slow!                         Slab guide removed for curves.
                                                                   1. Remove slab guide from platform
                                                                   2. Bearing will track template for curves or sink holes
                                                                                                                             9
10
                                   POLISHING TIPS

                                                        Hand Polishing Tips
                                                        • Attach diamond pads in center of each platen.
                                                        • Operate DS301 at highest speeds (5 or 6 on variable
                                                          speed control knob).
                                                        • Move with a back and forth, side to side motion to
                                                          be sure you cover complete surface.
                                                        • Overlap passes about 2” to 3”.
                                                        • With metal bond 50/60 grit grinding discs, the DS301
                                                          will remove approximately 1/4” of concrete in 60-90
                                                          seconds, exposing aggregate.
                                                        • Move polisher across surface faster for light expo
                                                          sure (sand finish)




Edge Pro Tips
• After inserting and tightening router bit, make sure the splash guard is in place.
• Align the slab guide to thebit bearing using an angle tee, moving the slab guide in the slots, tighten
  knobs when in correct position (touching the edge of slab to the cutting edge of the bit)
• Set the depth of the router bit.
• Align water jet for maximum coolant delivery to router bit.
• Run the bit past the edge in a “planing action”.
• Several easy passes are better than one.
• When in doubt - go slow!
• Always wear the proper eye protection.


Walk Behind Polishing Instructions
• Plug the power cord into 220V, 30amp (DS605) or 115V,
  20 amp (DS602, DS302) circuit 50Hz or 60 Hz power.
• Allow 60 seconds to charge up the inverter and the
  green light will illuminate.
• Adjust the height of the wheel axle so the platens
  closest to rear wheels are approximately 1/16” or less
  off the surface. NOTE: Dry diamond pads are thinner
  than heavy duty grinding diamonds - you must adjust
  the axle height accordingly.
• Tip the machine back on its handle, exposing platens.
• Attach diamond wheels(Velcro) making sure that they
  are centered. Press firmly to ensure a positive lock.
• Proper cleaning with a high pressure hose before and
  after use is essential for ensuring Velcro grip properly.
• Lower machine so the diamonds come in contact with                     GRIT               Recommended RPM
  floor. Wiggle the machine on the floor to ensure a              Metal Grinding Disc            1000-1500
  solid grip on the diamonds before turning on the                   Wet Resin (50)              1200-1700
  machine.
                                                                    Wet Resin (100)              1400-1900
• Turn stop/start switch to ‘START’ after charging the
  inverter for 60 seconds. The unit will not operate until          Wet Resin (200)              1600-2100
  the speed is increased above zero.                                Wet Resin (400)              1800-2300
• Adjust the speed for grinding, honing or polishing                Dry Resin (800+)             2000-2500
• To stop, return speed knob to zero, then switch                Note: These are the recommended speeds, not all
  START/STOP switch to “STOP”                                    grits are shown.

                                                                                                                   11
             Polishing Equipment & Pads




                                                 (800) 321-5336
                                                 diamondproducts.com



                                                   AUTHORIZED DISTRIBUTOR

DIAMOND PRODUCTS
     333 Prospect Street
      Elyria, Ohio 44035
        (440) 323-4616
     FAX: (440) 323-8689        Made in U.S.A.
 Canada Office (800) 843-0287   L6026 8K05/07

				
DOCUMENT INFO