Tapered Roller Bearings Tapered roller bearings are roller

Document Sample
Tapered Roller Bearings Tapered roller bearings are roller Powered By Docstoc
Tapered roller bearings are roller bearings with a capacity to carry large axial forces.
They are in good thrust that can withstand high radial forces as well.

In tapered roller bearings, inner track ring and the outer ring raceway segments and
got the pin when the rollers are made of a cone so that the conical surfaces and the
bed of the shaft of the roller, when there are finally meets a common point of the main
shaft bearings. This conical geometry is used because it gives a greater contact area
and better allows for large loads can be transported in non-spherical ball bearings.
tangential velocity in the roller surface are actually the same for the whole length of
the bed and touch the surface. This leads to the prevention of the difference between
rubbing. Rollers to guide the inner ring of the collar, which prevents them from
slipping out at high speeds because of an extract from them.
Tapered roller bearings are separable and consists of the outer ring, inner ring and
roller assembly. The inner ring and roller assembly, which can not be separated is
called the cone while the outer ring is called the cup. Tapered roller bearings are used
in the pair back in the car and rear wheel bearings of vehicles, where they are exposed
to radial and axial forces.
Most tapered roller bearings are made of alloy steels or low-carbon steels. Some
applications require the use of case-hardened or thorough-hardened, high-carbon,
bearing-quality steel. High-carbon grades of steel do not require carburizing and can
be case-hardened by induction heating or thorough-hardened by conventional heating
methods. When low-carbon, carburized grades of steel are used, carbon is introduced
after the cylindrical roller bearings are machined to a depth sufficient to produce a
hardened case that can sustain bearing loads. The addition of carbon and alloys
ensures the proper combination of a hard, fatigue-resistant case and a tough, ductile
Bore size and outside diameter (OD) are important specifications to consider when
selecting tapered roller bearings. The bore size is the bearings smallest dimension.
The outer diameter includes the bearing housing, but excludes the flange. Other
important specifications for tapered roller bearings include overall width, rated speed
(oil), static axial load, static radial load, dynamic axial load, and dynamic radial load.
Static axial load and static radial load are, respectively, the maximum axial and radial
loads that bearings can withstand without permanent deformation. Dynamic axial load
and dynamic radial load are, respectively, the calculated axial and radial loads under
which a group of identical bearings with stationary outer rings can endure for a rating
life of 1 million revolutions of the inner ring. Precision Bearings Pvt. Ltd.
manufactures and distributes a wide range of taper roller bearings including tapered
trust bearings .