Docket No. A-94-52 Subcategory II-A EPA Studies or Contractor Reports Document No. II-A-1 Description U.S. Environmental Protection Agency, Compilation of Air Pollutant Emission Factors. 1991 AP-42. U.S. Environmental Protection Agency, Research Triangle Park, North Carolina. pp. 4.12.1-4.12.10. U.S. Environmental Protection Agency, Locating and Estimating Air Emissions from Sources of Styrene, Interim Report. Office of Air Quality Planning and Standards, Research Triangle Park, North Carolina. EPA-450/4-91-029. October 1991. Determination of Styrene Emissions from the Cultured Marble and Sink Manufacturing Industry at General Marble Lincolnton, NC. Final Report. Radian Corporation. Prepared for the U.S. Environmental Protection Agency. June 1992. Evaluation of the Polyad FB Air Purification and Solvent Recovery Process for Styrene Removal. Southern Research Institute. Prepared for the U.S. Environmental Protection Agency. EPA-600/R-93-212. November 1993
II-A-2
II-A-3
II-A-4
Docket: A-94-52 Category: II-A EPA Studies or Contractor Reports Docket Number II-A-5 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Draft Report: Preliminary Emissions Testing at Dow Chemical on January 4-5, 1995. Research Triangle Institute in cooperation with the Air and Energy Engineering Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards in Research Triangle Park, North Carolina. 28 pp. Assessment of Styrene Emission Controls for FRP/C and Boat Building Industries. Final Report. Research Triangle Institute in cooperation with the National Risk Management Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards in Research Triangle Park, North Carolina. EPA-600/R-96-109. 133 pp. Addendum to Assessment of Styrene Emission Controls for FRP/C and Boat Building Industries. Final Report. Research Triangle Institute in cooperation with the National Risk Management Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards in Research Triangle Park, North Carolina. Addendum is EPA-600/R-96-136. 56 pp. Evaluation of Styrene Emissions from a Shower Stall/Bathtub Manufacturing Facility. Southern Research Institute in cooperation with the Air and Energy Engineering Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Research and Development in Washington, DC. EPA-600/R-96-138. 64 pp. Date of Document January 30, 1995
II-A-6
September 1996
II-A-7
November 1996
II-A-8
November 1996
Docket: A-94-52 Category: II-A EPA Studies or Contractor Reports Docket Number II-A-9 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Evaluation of Pollution Prevention Techniques to Reduce Styrene Emissions from Open Contact Molding Processes. Volume 1, Final Report. Research Triangle Institute in cooperation with the National Risk Management Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Research and Development in Washington, DC EPA-600/R-97-018a. 74 pp. Evaluation of Pollution Prevention Techniques to Reduce Styrene Emissions from Open Contact Molding Processes. Volume II, Appendixes. Research Triangle Institute in cooperation with the National Risk Management Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Research and Development in Washington, DC EPA-600/R-97-018b. 151 pp. Date of Document March 1997
II-A-10
March 1997
Docket: A-94-52 Category: II-A EPA Studies or Contractor Reports Docket Number II-A-11 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. EPA Office of Compliance Sector Notebook Project: Profile of the Rubber and Plastics Industry. U.S. Environmental Protection Agency, Office of Enforcement and Compliance Assurance. EPA/310-R-95-016. Washington, DC. 1995. 151 pp. Air Emissions form Reinforced Plastics Composite Manufacturing Process. LASCO Panel Products: Volume I. Prepared for the U.S. Environmental Protection Agency. Office of Air Quality Planning and Standards. EPA-454/R-99-024a. Air Emissions from Reinforced Plastics Composite Manufacturing Process. LASCO Panel Products: Volume II. Prepared for the U.S. Environmental Protection Agency. Office of Air Quality Planning and Standards. EPA-454/R-99-024b. Air Emissions from Reinforced Plastics Composite Manufacturing Process. LASCO Panel Products: Volume III. Prepared for the U.S. Environmental Protection Agency. Office of Air Quality Planning and Standards. EPA-454/R-99-024c. Date of Document September 1995
II-A-12
August 1999
II-A-13
August 1999
II-A-14
August 1999
Docket: A-94-52 Category: II-A EPA Studies or Contractor Reports Docket Number II-A-15 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Excel spreadsheet with file name RPC_Market_Assign.xls This file contains the mapping of individual facilities to market segments. This data was used as inputs to the economic analysis. 1 diskette Excel spreadsheet with file name PRODCOMP1.XLS. This file contains data on facility use of resin, gel coat, reinforcement, fillers, and additives. This data was used as inputs to the economic analysis. 1 diskette Economic Impact Analysis for Air Pollution Regulations: Reinforced Plastics Industry. Prepared for U.S. environmental Protection Agency, Office of Air Quality Planning and Standards, Research Trangie Park, NC. Hazardous Air Pollutant Emissions for the Production of Reinforced Plastic Composites. Background Information Document for Proposed Standards. Date of Document August 2000
II-A-16
December 2000
II-A-17
May 2001
II-A-18
May 2001
Docket No. A-94-52 Subcategory II-B EPA Factual Memoranda
Document No. II-B-1 II-B-2
Description Report of plant visit to Eljer Plumbingware, Wilson, North Carolina, on June 16, 1993. Report of plant visits to VIATEC Hastings Engineered Systems in Hastings and Belding, Michigan, on July 14, 1993. Report of plant visit to Omega Pultrusions, Inc., Aurora, Ohio, on August 10, 1993. Report of plant visit to Xerxes Corporation, Avon, Ohio, on August 10, 1993. Report of plant visit to Premix, Inc., North Kingsville, Ohio, on August 11, 1993. Report of plant visit to Glastic Corporation, South Euclid, Ohio, on August 11, 1993. Report of plant visit to Picken's Plastics, Inc., Ashtabula, Ohio, on August 12, 1993. Report of plant visit to Molded Fiber Glass, Union City, Pennsylvania, on August 12, 1993.
II-B-3 II-B-4 II-B-5 II-B-6 II-B-7 II-B-8
Docket No. A-94-52 Subcategory II-B EPA Factual Memoranda
Document Number II-B-9
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. Report of plant visit to LASCO Bathware in South Boston, Virginia, on June 22, 1995. 29 pp. Report of plant visit to Sequentia Inc., in Grand Junction, Tennessee, on July 11, 1996. 1 p. Confidential business information located at CN-N404-9/ 96185-C18-05. 10 pp. 1 diskette. Report of plant visit to Enduro Plastics, in Fort Worth, Texas on July 9, 1996. 1 p. Confidential business information located at CN-N404-8/ 96185-C18-06. 16 pp. 1 diskette. Report of plant visit to Tecton Products, in Fargo, North Dakota, on June 4 and 5, 1996. 5 pp. Report of plant visit to Fibercast Co., in Sand Springs, Oklahoma, on July 10, 1996 and NESHAP Information for U.S. Environmental Protection Agency and Pacific Environmental Services. 159 pp. Report of plant visit to Cytec Industries, Inc., in Perrysburg, Ohio, on July 25, 1996. 23 pp. Confidential business information located at CN-N404-11/96185-C18-08. 30 pp.
Date of Document August 31, 1995
II-B-10
October 1, 1996
II-B-11
October 15, 1996
II-B-12
December 17, 1996 February 3, 1997
II-B-13
II-B-14
April 22, 1997
Docket No. A-94-52 Subcategory II-B EPA Factual Memoranda Document Number II-B-15 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Report of plant visit to Core Materials Corp., (Navistar), in Columbus, Ohio on July 24, 1996. 41 p. Confidential business information is located at CN-N801-5/ 96185-C18-07. 39 pp. 1 diskette. Date of Document August 5, 1997
II-B-16
Report of plant visit to LASCO Panel Products, in Florence, Kentucky, on September 11, 1996. 11 pp. Confidential business information located at CN-N5043/ CN-N801-2. 10 pp. Report of plant visit to Glasforms, Inc., in Birmingham, Alabama, on January 15, 1998. 131 pp. Confidential Business Information is located at CN-N801-12/ 98185-C18-02. 124 pp. 1 video tape, 1 cassette tape, 1 diskette and 31 photos. Greg LaFlam and Melanie Proctor, Pacific Environmental Services, to Madeleine Strum, U.S. Environmental Protection Agency. Industry Description Memorandum. Robert Lacovara, Composite Fabricators Association. CFA Phase I Hand Lay-up Emission Profile Data. cfahand.xls (Data File - 1 diskette) Robert Lacovara, Composite Fabricators Association. CFA Phase I Spray-up Emission Profile Data. cfapsray.xls (Data File - 1 diskette)
August 14, 1997
II-B-17
July 10, 1998
II-B-18
October 17, 1995
II-B-19
October 6, 1998
II-B-20
October 6, 1998
Docket No. A-94-52 Subcategory II-B EPA Factual Memoranda Document Number II-B-21 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Keith Barnett, U.S. Environmental Protection Agency to Reinforced Plastics Composites Project File. Emission Test Data for Intermetro Industries Corporation for June 10, 1998 Emission Test. Kenneth R. Meardon, Pacific Environmental Services, Inc. to Keith Barnett, U.S. Environmental Protection Agency. Growth in the Reinforced Plastics Industries Kenneth R. Meardon, Pacific Environmental Services, Inc to Keith Barnett, U.S. Environmental Protection Agency. Facility specific cost Estimates for Existing Sources. Kenneth R. Meardon, Pacific Environmental Services, Inc to Keith Barnett, U.S. Environmental Protection Agency. Facility specific cost Estimates for New Sources. William H. Lamason, U.S. Environmental Protection Agency, Source Measurement Group to Penny Lassiter, Organic chemicals Group. Voluntary consensus Standard Results for the Reinforced Plastic Composites NESHAP Proposed Rule. Report of plant visit to A.R.E., Inc., in Massillon, Ohio on February 16, 2000. Nonconfidential version. Date of Document December 13, 1999
II-B-22
July 7, 2000
II-B-23
July 17, 2000
II-B-24
July 17, 2000
II-B-25
September 6, 2000
II-B-26
December 28, 2000
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons
Docket Number II-C-1
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. M. Strum, EPA:OAQPS, to J. Schweitzer, Composites Institute. March 31, 1993. Requesting assistance in developing questionnaires for the composites industry. M. Strum, EPA:OAQPS, to J. Schweitzer, Composites Institute. April 15, 1993. Requesting specific literature from the Society of Plastics Industry literature catalog. G. LaFlam, PES, Inc., to F. Callihan, Aristech Chemical Corporation. April 26, 1993. Request for technical background information on the component materials, processes, and control measures used in the plastic composites industry. M. Strum, EPA:OAQPS, to S. McNally, Composite Fabricators Association. June 22, 1993. Fax transmittal discussing items not clearly covered by the questionnaire. D. Carroll, PES, Inc., to L. Moore, Fibercast. June 28, 1993. Request for process flow chart for Fibercast product. B. Jordan, EPA:ESD, to M. Landrum, AA Fiberglass, Inc. July 26, 1993. Generic information collection request (ICR). (Identical letters sent to addressees listed on attachment to M. Landrum letter). S. Wyatt, EPA:CPB, to T. Deller, Omega Pultrusions, Inc. August 5, 1993. Requesting visit to Aurora, Ohio, facility. S. Wyatt, EPA:CPB, to G. Grant, Glastic Corporation. August 5, 1993. Requesting visit to South Euclid, Ohio, facility.
Date of Document
II-C-2
II-C-3
II-C-4
II-C-5
II-C-6
II-C-7
II-C-8
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-9 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. S. Wyatt, EPA:CPB, to T. Picken, Picken's Plastics. August 5, 1993. Requesting visit to Ashtabula, Ohio, facility. S.Wyatt, EPA:CPB, to J. Blue, Xerxes Corporation. August 5, 1993. Requesting visit to Avon, Ohio, facility. S. Wyatt, EPA:CPB, to D. Bonner, Premix, Inc. August 5, 1993. Requesting visit to N. Kingsville, Ohio, facility. S. Wyatt, EPA:CPB, to G. Bender, Molded Fiber Glass Company. August 5, 1993. Requesting visit to Union City, Pennsylvania, facility. M. Strum, EPA:OAQPS, to W. Harris, American Marble Company, Inc. August 6, 1993. Letter informing company that two identical information collection requests were sent but only one needs to be completed. (Identical letters sent to addressees listed on attachment to W. Harris letter). D. Carroll, PES, Inc., to R. Hill, Lexmark International. August 18, 1993. Letter confirming that Lexmark does not have to respond to the section 114 screening survey because they are not in the reinforced plastics source category. L. Herring, EPA:ESD, to R. Leitzman, Cytec Industries. February 21, 1995. Request to review telecon report for accuracy and to answer additional questions. M. Strum, EPA:OAQPS, to pre-MACT team members. March 23, 1995. Analytic blueprint for the reinforced plastic composite NESHAP. Date of Document
II-C-10
II-C-11
II-C-12
II-C-13
II-C-14
II-C-15
II-C-16
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-17 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. G. LaFlam, PES, Inc., to pre-MACT team members. May 16, 1995. Agenda and information material for vendor pre-MACT teleconference scheduled for May 24, 1995. J. Spooner, EPA:PPD, to B. Lacovera, Composites Fabricators Association. June 20, 1995. Request for assistance in a pollution prevention technologies study for open-mold production processes. M. Strum, EPA:OAQPS, to pre-MACT team members. July 21, 1995. Agenda for pre-MACT teleconference on July 31, 1995. M. Strum, EPA:OAQPS, to E. Hayash, BYKChemie USA. August 17, 1995. Letter requesting information on the use of BYK-Chemie's vapor suppressant. M. Strum, EPA:OAQPS, to T.Hedger, Magnum Industries. August 17, 1995. Letter requesting information on the use of flow coaters and pressurefed rollers. M. Strum, EPA:OAQPS, to G. Rountree, Aerospace Industries Association. August 29, 1995. Letter addressing Aerospace involvement in resin processes, and asking aerospace industry to participate in developing background information. M. Strum, EPA:OAQPS, to pre-MACT team members. September 15, 1995. Agenda and information package for the September 27, 1995 meeting. Date of Document
II-C-18
II-C-19
II-C-20
II-C-21
II-C-22
II-C-23
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-24 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. M. Strum, EPA:OAQPS:CCPG, to S. McNally, Composites Fabricators Assoc., (CFA). Response to letter regarding representativeness of the mailing list for the composites industry screening survey. 2 pp. G. LaFlam, PES, Inc., to pre-MACT team members. Agenda and time for vendor pre-MACT teleconference scheduled for May 24, 1995. 1 p. M. Strum, EPA:OAQPS:CCPG, to pre-MACT team members. Draft industry description memorandum for pre-MACT team review. 30 pp. M. Strum, EPA:OAQPS:CCPG, to pre-MACT team members. Draft Pollution Prevention/Source Reduction Measures memorandum for pre-MACT team review. 34 pp. M. Strum, EPA:OAQPS:CCPG, to pre-MACT team. Letter providing materials and confirming plans for a team teleconference to be held March 20, 1996. 105 pp. M. Strum, EPA:OAQPS:CCPG, to M. Smith, Cor Tec Co. Letter containing background information for March 11, 1996 conference call. 3 pp. B. Jordan, EPA:OAQPS:ESD, to J. Schweitzer, Composites Institute. Letter addressing issues of concern to be discussed during April 26, 1996 meeting: MACT floor subcategorization, cost of abatement technologies, and determining MACT floors. 2 pp. Date of Document September 8, 1993
II-C-25
May 3, 1995
II-C-26
October 20, 1995
II-C-27
November 7, 1995
II-C-28
February 29, 1996
II-C-29
March 7, 1996
II-C-30
April 10, 1996
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-31 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. M. Strum, EPA:OAQPS:CCPG, to S. McNally, Composites Fabricators Assoc., (CFA). Response to April 11, 1996 letter on MACT floor determinations and LASCO Bathware. 14 pp. L. Herring, EPA:OAQPS:CCPG, to J. Jambois, Tecton Products. Letter confirming June 4 and 5, 1996 site visit to Fargo, North Dakota, facility. 18 pp. L. Herring, EPA:OAQPS:CCPG, to D. Partovi, Enduro Composite Systems. Letter confirming July 9, 1996 site visit to Fort Worth, Texas, facility. 22 pp. L. Herring, EPA:OAQPS:CCPG, to C. Novak, Sequentia Inc. Letter confirming July 11, 1996 site visit to Grand Junction, Tennessee, facility. 19 pp. L. Herring, EPA:OAQPS:CCPG, to B. Kinman, Fibercast Co. Letter confirming July 10, 1996 site visit to Sand Springs, Oklahoma, facility. 26 pp. K. Meardon, PES, Inc., to E. Raphael, Navistar International. Letter confirming July 24, 1996 site visit to Columbus, Ohio, facility. 1 p. M. Proctor, PES, Inc., to C. Smith, Morrison Molded Fiber Glass (MMFG). Section 114 transmittal letter and request for information. 24 pp. M. Strum, EPA:OAQPS:CCPG, to S. McNally, Composites Fabricators Assoc., (CFA). Draft of the MACT floor analyses for non-corrosion resistant hand and spray lay up facilities. 35 pp. L. Herring, EPA:OAQPS:CCPG, to R. Leitzman, Cytec Industries. Letter confirming July 25, 1996 site visit to Perrysburg, Ohio, facility. 19 pp. Date of Document May 9, 1996
II-C-32
May 15, 1996
II-C-33
June 24, 1996
II-C-34
June 24, 1996
II-C-35
June 24, 1996
II-C-36
June 25, 1996
II-C-37
June 25, 1996
II-C-38
July 8, 1996
II-C-39
July 15, 1996
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-40 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. L. Herring, EPA:OAQPS:CCPG, to E. Raphael, Navistar International. Letter confirming July 24, 1996 site visit to Columbus, Ohio, facility. 28 pp. M. Strum, EPA:OAQPS:CCPG, to J. Schweitzer, Composites Institute. Comments on summaries of July 29, 1996 Pultrusion Industry Council and MACT for Composites meetings. 8 pp. M. Strum, EPA:OAQPS:CCPG, to J. Schweitzer, Composites Institute. Letter containing the operating permit and 1993 emission test data for Tecton Products. 9 pp. L. Herring, EPA:OAQPS:CCPG, to H. North, LASCO Panel Products. Letter confirming September 11, 1996 site visit to Florence, Kentucky, facility. 18 pp. S. Wasson, EPA:ORD:APPCD, to R. Lacovara, Composites Fabricators Assoc., (CFA). Request for CFA to refrain from using “EPA Category II QA requirements” in their reports. 1 p. M. Proctor, PES, Inc., to J. Schweitzer, Composites Institute. Draft open molding spray and gel coating table used at the September 16, 1996 meeting. 2 pp. M. Strum, EPA:OAQPS:CCPG, to H. North, LASCO Panel Products. Letter requesting additional information with regard to issues discussed during the tour of the continuous lamination process at the Florence, Kentucky, facility. 10 pp. Date of Document July 15, 1996
II-C-41
August 12, 1996
II-C-42
August 13, 1996
II-C-43
August 30, 1996
II-C-44
September 9, 1996
II-C-45
September 19, 1996
II-C-46
September 20, 1996
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-47 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. K. Meardon, to R. Leitzman, Cytec Industries. Policies regarding the treatment of confidential information under the current EPA contract (68D10116) and Designation of Authorized Representative form. 6 pp. M. Proctor, PES, Inc., to J. Denchfield, Fleetwood Enterprises, Inc. Letter requesting updated information concerning the percentage of HAP as supplied for each of the resins used by Fleetwood Enterprises, Inc., and the annual distribution of the usage for each of those resins. 2 pp. M. Proctor, PES, Inc., to S. McNally, Composite Fabricators Assoc., (CFA). Draft data tables for: Open Molding-Non-Corrosion Resistant; Polymer Casting and Polymer Concrete; and Filament Winding Separated for Corrosion Resistant and Non-Corrosion Resins. 10 pp. B. Jordan, EPA:OAQPS:ESD, to G. Rountree, Aerospace Industries Assoc. Letter in response to request for clarification on the scope of the NESHAP for reinforced plastic composites production. 2 pp. M. Proctor, PES, Inc., to H. North, LASCO Panel Products. Blank table of proposed sampling conditions at LASCO Panel Products. 2 pp. L. Herring, EPA:OAQPS:CCPG, to H. North, LASCO Panel Products. Letter transmitting proposed sampling conditions for emissions testing and a list of products and production parameters collected during the October 29, 1996 visit. 4 pp. Date of Document September 26, 1996
II-C-48
October 8, 1996
II-C-49
December 16, 1996
II-C-50
January 13, 1997
II-C-51
February 18, 1997
II-C-52
February 20, 1997
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-53 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. M. Proctor, PES, Inc., to L. Craigie, The Dow Chemical Co. Issues from February 24, 1997 discussion about the filament winding styrene emissions study. 2 pp. K. Meardon, PES, Inc., to T. Cremeans, National Electric Coil. Letter requesting information for use in identifying applicable subcategory for National Electric Coil’s process(es). 3 pp. M. Proctor, PES, Inc., to T. Ziegler, American Acrylic Corp. Letter providing information about the nature and the scope of the reinforced plastic composites NESHAP and Designation of Authorized Representative form. 3 pp. M. Proctor, PES, Inc., to E. Studinka, Wilsonart. Letter inquiring whether the Gibraltar plant is a major source and a copy of the plant’s 1993 screening survey. 10 pp. K. Meardon, PES, Inc., to B. Howard, Weber and Sons Button Co., Inc. Letter requesting information for use in identifying applicable subcategory for Weber and Sons Button Co., Inc. process(es). 3 pp. Date of Document February 24, 1997
II-C-54
February 28, 1997
II-C-55
March 3, 1997
II-C-56
March 3, 1997
II-C-57
March 19, 1997
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons
Docket Number II-C-58
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. L. Herring, EPA:OAQPS:CCPG, to S. Hartman, LASCO Bathware, Inc. Confirmation of site visit on June 22, 1995 at the facility in South Boston, Virginia. 3 pp. M. Strum, EPA:OAQPS:CCPG, to J. Wilgus, American Standard. Request for information on the economics of abatement of styrene emissions in the reinforced plastic composites industry. 2pp. L. Herring, EPA:OAQPS:CCPG, to J. Jambois, Tecton Products. Submittal of final report of site visit on June 4 and 5, 1996 in Fargo, North Dakota. 2 pp. M. Strum, EPA:OAQPS:CCPG, to S. McNally, Composites Fabricators Association. MACT floor database. 32 pp. M. Strum, EPA:OAQPS:CCPG, to J. Schweitzer, Composites Institute. MACT floor database. 2 pp. L. Herring, EPA:OAQPS:CCPG, to R. Leitzman, Cytec Industries, Inc. Copies of confidential and non-confidential site visit report. 2 pp. Confidential business information is located at CN-N404-11/ 96185-C18-08. 30 pp. 1 diskette. L. Herring, EPA:OAQPS:CCPG, to H. North, LASCO Panel Products. Confirmation of site visit on May 19 and 20, 1997 at facility in Florence, Kentucky. 14 pp.
Date of Document June 13, 1995
II-C-59
April 15, 1996
II-C-60
December 23, 1996
II-C-61
April 24, 1997
II-C-62 II-C-63
April 24, 1997 April 25, 1997
II-C-64
May 9, 1997
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-65 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. B. Jordan, EPA:OAQPS:ESD, to M. Aker, AKER Plastics Co., Inc. Section 114 information collection request for the facility in Plymouth, Indiana. Identical letters sent to J. Kronewitterk, Bremen Glass, Inc.; C. Sanchez, Classic Motor Carriages; T. Schenk, Global Glas, Inc.; R. Mullininx, Great Dane Trailers Indiana, Inc.; R. Sandstrom, Johnson Truck Bodies; M. Hart, Prestigious Accessories, Inc.; B. Mitchell, Tri-Glas/VNC Fiberglass Products, Inc.; and P. Mitchell, Ultra/Glass of Lakeville; 20 pp. M. Strum, EPA:OAQPS:CCPG, to S. McNally, Composites Fabricators Association and J. Schweitzer, Composites Institute. Submittal of meeting minutes from May 9, 1997 meeting in Durham, North Carolina, between EPA and industry. 2 pp. M. Proctor, PES, Inc, to L. McClellan, Ashland Chemical Co. Request for information concerning AROPOL Q6944 ACC GO (MSDS No: 0190756) for the facility in Columbus, Ohio. 3 pp. M. Proctor, PES, Inc., to L. Schweitzer, Molded Fiberglass Companies. Request for verification of 1993 EPA survey information for the facility in Union City, Pennsylvania. 14 pp. B. Jordan, EPA:OAQPS:ESD, to R. Dulany, Country Coach, Inc. Section 114 information collection request for the facility in Junction City, Oregon. 18 pp. B. Jordan, EPA:OAQPS:ESD, to W. Toms, Lund Industries, Inc. Section 114 information collection request for the facility in Anoka, Minnesota. 18 pp. M. Proctor, PES, Inc., to R. Leitzman and J. DeMarco-Handley, Cytec Industries. Calculations for the November 1996 source test report for the facility in Perrysburg, Ohio. 3 pp. Date of Document June 23, 1997
II-C-66
June 26, 1997
II-C-67
July 17, 1997
II-C-68
July 31, 1997
II-C-69
August 13, 1997
II-C-70
August 13, 1997
II-C-71
August 20, 1997
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-72 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. M. Strum, EPA:OAQPS:CCPG, to S. McNally, Composites Fabricators Association. Resin cost determination and add-on control spreadsheets. 5 pp. M. Strum, EPA:OAQPS:CCPG, to B. Lacovara, Composites Fabricators Assoc., (CFA). Request for information to better evaluate the proposal submitted by CFA. 2 pp. M. Strum, EPA:OAQPS:CCPG, to S. McNally, Composites Fabricators Association. Open-molding processes database in the format used to determine the MACT floor for the option presented to industry representatives during May 9, 1997 meeting in Durham, North Carolina. 12 pp. M. Strum, EPA:OAQPS:CCPG, to R. Haberlein, Engineering Environmental (for Composites Fabricators Association) Emissions data used to generate the MACT emission models. 11 pp. M. Strum, EPA:OAQPS:CCPG, to R. Haberlein, Engineering Environmental (for Composites Fabricators Association). Updated MACT database for filament winding, mechanical, and manual application. 18 pp. L. Herring, EPA:OAQPS:CCPG, to H. North, LASCO Panel Products. Request for clarification concerning process data. 3 pp. Confidential business information located at CN-N801-6/ ESD 93/58. 4 pp. M. Proctor, PES, Inc., to B. Lacovara, Composites Fabricators Association. Information for the December 2, 1997 conference call. 6 pp. Date of Document August 26, 1997
II-C-73
September 30, 1997
II-C-74
October 16, 1997
II-C-75
November 6, 1997
II-C-76
November 7, 1997
II-C-77
November 10, 1997
II-C-78
November 18, 1997
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-79 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. M. Strum, EPA:OAQPS:CCPG, to J. Schweitzer, Composites Institute. Submittal of meeting minutes from October 27, 1997 pultrusion meeting between EPA and representatives of Pultrusion Industry Council in Durham, North Carolina. 2 pp. M. Strum, EPA:OAQPS:CCPG, to B. Lacovara, Composites Fabricators Association. Response to draft Development of Standard Styrene Suppressant Effectiveness Test. 8 pp. M. Strum, EPA:OAQPS:CCPG, to M. Naylor, Aker Plastics. Discussion of Method 204 verification of a total enclosure and request for information on capture efficiency. 4 pp. M. Strum, EPA:OAQPS:CCPG, to M. Froman, Ashland Chemical Company. Request for information concerning resin cost per pound by resin type. 3 pp. M. Strum, EPA:OAQPS:CCPG, to B. Lacovara and S. McNally, Composites Fabricators Association; R. Haberlein, Engineering Environmental, (contractor for CFA); and J. Schweitzer, Composites Institute. Submittal of meeting minutes from September 18, 1997 meeting between EPA and representatives of the Reinforced/Composites Industry on industry MACT proposal in Durham, North Carolina. 2 pp. L. Herring, EPA:OAQPS:CCPG, to T. McQuarrie, Glasforms, Inc. Confirmation of site visit on January 15, 1998 at the facility in Birmingham, Alabama. 17 pp. B. Jordan, EPA:OAQPS:ESD and J. Rasnic, EPA:OAQPS:METD, to S. McNally, Composites Fabricators Association. Response to November 11, 1997 letter concerning the incorporation of a controlled spray program in the MACT standard for reinforced plastic composites manufacturing. 3 pp. Date of Document November 18, 1997
II-C-80
November 19, 1997
II-C-81
November 30, 1997
II-C-82
December 1, 1997
II-C-83
December 1, 1997
II-C-84
December 11, 1997
II-C-85
December 30, 1997
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-86 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. J. Meyer, EPA:OAQPS:CCPG, to S. McNally, Composites Fabricators Association. Response to request for information concerning corrosion-resistant products and two telephone contact reports documenting the use of a flow coaters to apply gel coat. 42 pp. L. Herring, EPA:OAQPS:CCPG, to T. McQuarrie, Glasforms, Inc. Draft site visit report for January 15, 1998 site visit to the facility in Birmingham, Alabama. 3 pp. Confidential business information located at CN-N801-12/ 98185-C18-02. 31 photos. 1 video tape. 1 cassette tape. 1 diskette. 12 pp. M. Strum, EPA:OAQPS:CCPG, to R. Haberlein, Engineering Environmental, (for Composites Fabricators Association) Updated MACT database for open-molding. 25 pp. M. Strum, EPA:OAQPS:CCPG, to R. Haberlein, Engineering Environmental, (for Composites Fabricators Association) Draft set of equations to be used for ranking facilities with vapor suppressed resins for determining the MACT floor for open-molding operations. 9 pp. R. Jemison, PES, Inc., to D. Bush, Ohio Environmental Protection Agency. Request for information about permits and/or sections of permits that pertain to the manufacture of plastic composites using thermoset resins and certain fabrication processes and request for a copy of the performance test conducted on the pre-concentration system and thermal oxidizer used by American Standard's Salem, Ohio facility. 3 pp. M. Strum, EPA:OAQPS:CCPG, to J. Schweitzer, Composites Fabricators Association. Response to May 9, 1998 facsimile regarding cost methodologies for MACT. 2 pp. Date of Document February 5, 1998
II-C-87
February 23, 1998
II-C-88
March 18, 1998
II-C-89
April 17, 1998
II-C-90
May 21, 1998
II-C-91
May 22, 1998
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-92 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. M. Strum, EPA:OAQPS:CCPG, to J. Schweitzer and S. McNally, Composites Fabricators Association. Followup to teleconference with CFA, EPA, and PES, Inc., on May 26, 1998. 3 pp. M. Strum, EPA:OAQPS:CCPG, to J. Schweitzer and S. McNally, Composites Fabricators Association (CFA). Response to report titled, “CFA Emission Models for the Reinforced Plastics Industries.” 2 pp. K. Meardon, PES, Inc., to G. Rodgers, United Panel Inc. Request for information for the facility in Mount Bethel, Pennsylvania. 9 pp. M. Proctor, PES, Inc., to B. James, Enduro Composites Systems, Inc. Request for verification of information from the 1993 Section 114 information collection request for the old Velasco Scale Company facility in Freeport, Texas. 4 pp. M. Proctor, PES, Inc., to J. Winfrey, Neste Polyester America. Request for gel coat property and cost data. 5 pp. M. Proctor, PES, Inc., to K. Kigweba, Ferro Corp. Request for gel coat property and cost data. 15 pp. M. Proctor, PES, Inc., to M. Hollenbech, Cook Composites and Polymers. Request for gel coat property and cost data. 6 pp. K. Meardon, PES, Inc., to D. Boyd, Boyd and Associates. Draft continuous lamination spreadsheet, dated April 15, 1997. 3 pp. K. Meardon, PES, Inc., to G. Begg, Resolite. Request for information concerning the 1994 stack test on continuous lamination for the facility in Zelienople, Pennsylvania. 12 pp. Date of Document June 4, 1998
II-C-93
June 5, 1998
II-C-94
June 19, 1998
II-C-95
July 1, 1998
II-C-96
July 9, 1998
II-C-97 II-C-98
July 9, 1998 July 14, 1998
II-C-99
July 22, 1998
II-C-100
August 13, 1998
Docket No. A-94-52 Subcategory II-C EPA Correspondence with Outside Persons Docket Number II-C-101 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. S. McKee, PES, Inc., to N. Mahan, Underwriter's Laboratories. Request for information on testing and certification costs of reinforced plastic products. 2 pp. S. McKee, PES, Inc., to J. Kutzli, Bathcraft Incorporated. Follow-up letter containing PES's authority to collect information for the EPA and a contact report discussing potential indirect costs associated with imnplementing the usage of a vapor suppressant. 3 pp. M. Strum, EPA:OAQPS:CCPG, to J. Spaulding, North End Composites. Follow-up on discussion on tooling resins for boat and reinforced plastics tools. 2 pp. R. Jemison, PES, Inc., to B. James, Enduro Systems, Inc. Letter providing information about the measurement of styrene emissions from pultrusion operations. 15 pp. S. McKee, PES, Inc., to B. Brody, Ashland Chemical Company. Request for information about tooling resins, prices and densities for low HAP tooling gel coats, and price information on switching from a non-vapor suppressed resin to a vapor suppressed resin. 2 pp. M. Strum, EPA:OAQPS:CCPG, to J. Hanley, Process Technologies, Inc. Follow-up discussion on "proof of concept" verification for add-on control systems that have not been used in the U.S. 1 p. J. Rasnic, EPA:OAQPS:METD, to S. McNally, Composites Fabricators Associations (CFA). Response to CFA's December 16, 1998 letter regarding the incorporation of a controlled spray program in the MACT standard. 5 pp. Date of Document August 19, 1998
II-C-102
September 2, 1998
II-C-103
September 25, 1998
II-C-104
October 6, 1998
II-C-105
October 29, 1998
II-C-106
December 16, 1998
II-C-107
April, 29, 1999
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-1
Description J. Charette, 20th Century Fiberglass, Inc., to B. Jordan, EPA:ESD. Database #: 103. August 30, 1993. Response to Section 114 screening information request for the Elkhart, IN, facility. B. Johnson, 3M, to B. Jordan, EPA:ESD. Database #: 350. September 14, 1993. Response to Section 114 screening information request for the St. Paul, MN, facility. T. Johnson, A-1 Fiberglass, Inc., to B. Jordan, EPA:ESD. Database #: 467. August 31, 1993. Response to Section 114 screening information request for the Hastings, NE, facility. O. Walters, A-1 Superior, Inc., to B. Jordan, EPA:ESD. Database #: 513. October 21, 1993. Response to Section 114 screening information request for the Odessa, FL, facility. P. Osborne, A.C. Marble, Inc., to B. Jordan, EPA:ESD. Database #: 454. August 31, 1993. Response to Section 114 screening information request for the Ashland, KY, facility. R. Garthwaite, A.L. Hyde Company, to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the Grenloch, NJ, facility is not in the reinforced plastics source category. K. Landrum, AA Fiberglass, Inc., to B. Jordan, EPA:ESD. Database #: 251. August 30, 1993. Response to Section 114 screening information request for the Jacksonville, FL, facility. R. Hoy, ABC Industries, Inc., to B. Jordan, EPA:ESD. Database #: 335. No date. Response to Section 114 screening information request for the Wallace, IN, facility. R. Hoy, ABC Industries, Inc., to B. Jordan, EPA:ESD. Database #: 333. September 13, 1993. Response to Section 114 screening information request for the Winona Lake, IN, facility. R. Hoy, ABC Industries, Inc., to B. Jordan, EPA:ESD. Database #: 334. No date. Response to Section 114 screening information request for the Grand Junction, CO, facility.
II-D-2 II-D-3
II-D-4
II-D-5
II-D-6
II-D-7
II-D-8
II-D-9
II-D-10
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-11
Description R. Bird, ACME Reinforced Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 25. August 23, 1993. Response to Section 114 screening information request for the Marysville, CA, facility. L. Pulliam, AGCO, Inc., to B. Jordan, EPA:ESD. Database #: 135. August 24, 1993. Response to Section 114 screening information request for the Norcross, GA, facility. E. Kennedy, AKZO, to B. Jordan, EPA:ESD. Database #: 471. September 2, 1993. Response to Section 114 screening information request for the Rockwood, TN, facility. R. Gatti, ARE, Inc., to B. Jordan, EPA:ESD. Database #: 204. August 26, 1993. Response to Section 114 screening information request for the Mount Eaton, OH, facility. M. Caporaso, Abatron, Inc., to B. Jordan, EPA:ESD. August 23, 1993. Letter stating that the Gilberts, IL, facility is not in the reinforced plastics source category. P. Gutierrez, Accent Marble Company, Inc., to B. Jordan, EPA:ESD. Database #: 256. Response to Section 114 screening information request for the Houston, TX, facility. R. Elkins, Accent Marble, Inc., to B. Jordan, EPA:ESD. Database #: 488. September 29, 1993. Response to Section 114 screening information request for the E. Bernstadt, KY, facility. J. Wihlborg, Accra Plastic Tooling, Inc., to B. Jordan, EPA:ESD. Database #: 458. August 31, 1993. Response to Section 114 screening information request for the Beloit, IL, facility. J. Ford, Accurate Glass, Inc., to B. Jordan, EPA:ESD. Database #: 272. August 31, 1993. Response to Section 114 screening information request for the Terre Haute, IN, facility. W. Gonsalues, Acme Fiberglass, Inc., to B. Jordan, EPA:ESD. Database #: 432. September 22, 1993. Response to Section 114 screening information request for the Hayward, CA, facility.
II-D-12
II-D-13
II-D-14
II-D-15
II-D-16
II-D-17
II-D-18
II-D-19
II-D-20
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-21
Description R. Chaudry, Advance Transformer Company, to B. Jordan, EPA:ESD. Database #: 413. September 27, 1993. Response to Section 114 screening information request for the Monroe, WI, facility. R. Chaudry, Advance Transformer Company, to B. Jordan, EPA:ESD. Database #: 609. November 1, 1993. Response to Section 114 screening information request for the Boscobel, WI, facility. J. Leslie, Advanced Composite Products & Technology, Inc., to B. Jordan, EPA:ESD. Database #: 109. August 24, 1993. Response to Section 114 screening information request for the Huntington Beach, CA, facility. P. Oswalt, Advantage Engineering, Inc., to B. Jordan, EPA:ESD. July 29, 1993. Letter stating that the Greenwood, IN, facility is not in the reinforced plastics source category. C. Troppito, Aero Transportation Products, to B. Jordan, EPA:ESD. Database #: 474. No date. Response to Section 114 screening information request for the Independence, MD, facility. M. Hinduja, Aeroquip Inoac Company, to B. Jordan, EPA:ESD. Database #: 491. September 28, 1993. Response to Section 114 screening information request for the Fremont, OH, facility. R. Henry, Akemi Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 79. August 27, 1993. Response to Section 114 screening information request for the Holt, MI, facility. D. Aker, Aker Plastics Company, Inc., to B. Jordan, EPA:ESD. Database #: 421. August 28, 1993. Response to Section 114 screening information request for the Plymouth, IN, facility. P. Byra, Akzo Engineering Plastics, Inc., to B. Jordan, EPA:ESD. August 4, 1994. Letter stating that Wilson Color is no longer part of Akzo Engineering Plastics; it is now part of the M.A. Hanna Company. J. Kohler, Al-Co Products, Inc., to B. Jordan, EPA:ESD. Database #: 456. August 31, 1993. Response to Section 114 screening information request for the Latty, OH, facility.
II-D-22
II-D-23
II-D-24
II-D-25
II-D-26
II-D-27
II-D-28
II-D-29
II-D-30
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-31
Description J. Grindstaff, Allen Group, Inc., to B. Jordan, EPA:ESD. Database #: 449. August 30, 1993. Response to Section 114 screening information request for the Orrville, OH, facility. R. Rockwell, Alliance Equipment Company, Inc., to B. Jordan, EPA:ESD. Database #: 298. August 31, 1993. Response to Section 114 screening information request for the Alliance, OH, facility. J. Bednar, Allied Color Industries, to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that the Cleveland, OH, facility is not in the reinforced plastics source category. J. Clark, Allied Foam Products, Inc., to B. Jordan, EPA:ESD. August 10, 1993. Letter stating that the Gainesville, GA, facility is not in the reinforced plastics source category. T. Knecht, Allied Moulded Products, Inc., to B. Jordan, EPA:ESD. Database #: 228. August 30, 1993. Response to Section 114 screening information request for the Bryan, OH, facility. T. Flynn/E. Reilly, Allied Signal Laminate Systems, to B. Jordan, EPA:ESD. Database #: 385. September 7, 1993. Response to Section 114 screening information request for the Hoosick Falls, NY, facility. J. Vaccaro, Allstate Plastics, Inc., to B. Jordan, EPA:ESD. September 1, 1993. Response to Section 114 screening information request for the South Amboy, NJ, facility. F. Gabel, Altec Industries, Inc., to B. Jordan, EPA:ESD. Database #: 240. August 30, 1993. Response to Section 114 screening information request for the St. Joseph, MO, facility. R. Vail, Alucobond Technologies, Inc., to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the Benton, KY, facility is not in the reinforced plastics source category. C. Luke, Aluma Shield Industries, Inc., to B. Jordan, EPA:ESD. August 27, 1993. Letter stating that the Daytona Beach, CA, facility is not in the reinforced plastics source category.
II-D-32
II-D-33
II-D-34
II-D-35
II-D-36
II-D-37
II-D-38
II-D-39
II-D-40
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-41
Description T. Ziegler, American Acrylic Corporation, to B. Jordan, EPA:ESD. Database #: 314. September 7, 1993. Response to Section 114 screening information request for the West Babylon, NY, facility. G. Horse, American Bluegrass Marble Company, to B. Jordan, EPA:ESD. Database #: 430. September 22, 1993. Response to Section 114 screening information request for the Louisville, KY, facility. R. Melton, American Cyanamid Company, to B. Jordan, EPA:ESD. August 25, 1993. Letter stating that the Mobile, AL, facility is not in the reinforced plastics source category. B. Harris, American Marble Company, Inc., to B. Jordan, EPA:ESD. Database #: 323. September 7, 1993. Response to Section 114 screening information request for the Birmingham, AL, facility. T. Jensen, American Reinforced Plastics, to B. Jordan, EPA:ESD. Database #: 412. October 1, 1993. Response to Section 114 screening information request for the Tacoma, WA, facility. M. Whitener, American Slate & Marble, to B. Jordan, EPA:ESD. Database #: 208. August 30, 1993. Response to Section 114 screening information request for the Hickory, NC, facility. M. Carlton, American Technology & Research, to B. Jordan, EPA:ESD. Database #: 479. October 15, 1993. Response to Section 114 screening information request for the Ocala, FL, facility. M. Koehler, American USA Export Division, to B. Jordan, EPA:ESD. August 19, 1993. Letter stating that the Lake Mohegan, NY, facility is no longer manufacturing in the U.S. D. Pacific, Americh Corporation, to B. Jordan, EPA:ESD. Database #: 87 & 88. August 24, 1993. Response to Section 114 screening information request for the Charlotte, NC, and Hollywood, CA, facilities. S. Autin, Ameron, to B. Jordan, EPA:ESD. Database #: 271. August 31, 1993. Response to Section 114 screening information request for the Spartanburg, SC, facility.
II-D-42
II-D-43
II-D-44
II-D-45
II-D-46
II-D-47
II-D-48
II-D-49
II-D-50
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-51
Description S. Autin, Ameron - Fiberglass Pipe Division, to B. Jordan, EPA:ESD. Database #: 283. No date. Response to Section 114 screening information request for the Burkburnett, TX, facility. T. Longmire, Amoco Chemical Company, to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the Chicago, IL, facility is not in the reinforced plastics source category. R. Westerfield, Ampco Metal, Inc., to M. Strum, EPA:OAQPS. Letter stating that the Milwaukee, WI, facility is not in the reinforced plastics source category. K. Westerdahl/C. Rice, Amtech Corporation, to B. Jordan, EPA:ESD. Database #: 342. August 14, 1993. Response to Section 114 screening information request for the Yelm, WA, facility. N. Hirshey, An-Cor Industrial Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 498. September 29, 1993. Response to Section 114 screening information request for the North Tonawanda, NY, facility. B. Russell, Apogee Plastic Technologies, Inc., to B. Jordan, EPA:ESD. Database #: 340. September 14, 1993. Response to Section 114 screening information request for the Daytona Beach, FL, facility. C. DeBusk, Appalachian Plastics, to B. Jordan, EPA:ESD. Database #: 322. August 7, 1993. Response to Section 114 screening information request for the Glade Spring, VA, facility. T. Hawtree, Applied Composites Corporation, to B. Jordan, EPA:ESD. Database #: 176. September 8, 1993. Response to Section 114 screening information request for the St. Charles, IL, facility. A. MacIntyre, Applied Plastics Technology, to B. Jordan, EPA:ESD. September 14, 1993. Response to Section 114 screening information request for the Bristol, RI, facility. A. Drummond, Applied Process Equipment Corporation, to B. Jordan, EPA:ESD. July 28, 1993. Letter stating that the Eglin, IL, facility is not in the reinforced plastics source category.
II-D-52
II-D-53
II-D-54
II-D-55
II-D-56
II-D-57
II-D-58
II-D-59
II-D-60
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-61
Description C. Liddy, Aqua Glass, to B. Jordan, EPA:ESD. Database #: 384. September 3, 1993. Response to Section 114 screening information request for the Adamsville, TN, facility. H. Boghossian, Armorcast Products Company, to B. Jordan, EPA:ESD. Database #: 455. August 31, 1993. Response to Section 114 screening information request for the North Hollywood, CA, facility. D. McCombs, Arrow Dynamics, Inc., to B. Jordan, EPA:ESD. Database #: 98. August 21, 1993. Response to Section 114 screening information request for the Clearfield, UT, facility. T. Kishel, Arrowhead Plastic Engineering, Inc., to B. Jordan, EPA:ESD. Database #: 604. December 29, 1993. Response to Section 114 screening information request for the Muncie, IN, facility. M. Wynalda, Arvron, Inc., to B. Jordan, EPA:ESD. August 17, 1993. Letter stating that the Grand Rapids, MI, facility is not in the reinforced plastics source category. G. Hammer, Ashland Chemical, Inc., to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the Columbus, OH, facility is not in the reinforced plastics source category. T. Hofslien, Ashley Furniture, to B. Jordan, EPA:ESD. August 24, 1993. Letter stating that the Arcadia, WI, facility is not in the reinforced plastics source category. P. Zielke, Ashworth Plastics Products Company, to B. Jordan, EPA:ESD. Database #: 250. August 30, 1993. Response to Section 114 screening information request for the Fall River, MA, facility. T. Jones, Associated Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 269. August 31, 1993. Response to Section 114 screening information request for the Riverside, CA, facility. R. Schmit, Astoria Industries, Inc., to B. Jordan, EPA:ESD. Database #: 344. September 14, 1993. Response to Section 114 screening information request for the Jackson, MN, facility.
II-D-62
II-D-63
II-D-64
II-D-65
II-D-66
II-D-67
II-D-68
II-D-69
II-D-70
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-71
Description A. Jones, Athena Marble, Inc., to B. Jordan, EPA:ESD. Database #: 40. August 18, 1993. Response to Section 114 screening information request for the Salisbury, NC, facility. J. Atols, Atols Tool & Mold Corporation, to B. Jordan, EPA:ESD. July 28, 1993. Letter stating that the Schiller Park, IL, facility is not in the reinforced plastics source category. P. Volz, Attbar Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 434. September 22, 1993. Response to Section 114 screening information request for the Vancouver, WA, facility. K. Langham, Austin Countertops, Inc., to B. Jordan, EPA:ESD. Database #: 61. August 20, 1993. Response to Section 114 screening information request for the Austin, TX, facility. J. Gregory, Automatic Technologies, Inc., to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the South Bend, IN, facility is not in the reinforced plastics source category. B. Winter, Automotive Industries, Inc., to M. Strum, EPA:OAQPS. August 5, 1993. Letter stating that the Strasburg, VA, facility is not in the reinforced plastics source category. W. Robert, BASF Corporation, to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that BASF has sold this business to CYTEC Industries, a division of American Cyanamid. T. Waleszonia, BP Chemicals, Inc., to B. Jordan, EPA:ESD. Database #: 141. August 26, 1993. Response to Section 114 screening information request for the Jonesboro, AR, facility. R. Waite, Bailey Manufacturing Corporation, to B. Jordan, EPA:ESD. Database #: 433. September 22, 1993. Response to Section 114 screening information request for the Conneaut, OH, facility. B. Kolkebeck, Baja Products Ltd., to B. Jordan, EPA:ESD. Database #: 99. August 18, 1993. Response to Section 114 screening information request for the Salisbury, NC, facility.
II-D-72
II-D-73
II-D-74
II-D-75
II-D-76
II-D-77
II-D-78
II-D-79
II-D-80
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-81
Description K. Price, Baja Products Ltd., to B. Jordan, EPA:ESD. Database #: 177. September 8, 1993. Response to Section 114 screening information request for the Tucson, AZ, facility. R. Fritz, Bally Engineered Structures, Inc., to B. Jordan, EPA:ESD. August 19, 1993. Letter stating that the Bally, PA, facility is not in the reinforced plastics source category. J. Chevalier, Baltek Corporation, to B. Jordan, EPA:ESD. Database #: 326. September 1, 1993. Response to Section 114 screening information request for the Northvale, NJ, facility. J. Kutzli, Bathcraft, Inc., to B. Jordan, EPA:ESD. Database #: 353. September 14, 1993. Response to Section 114 screening information request for the Valdosta, GA, facility. C. Hefner, Bathroom Designs, to B. Jordan, EPA:ESD. Database #: 281. August 31, 1993. Response to Section 114 screening information request for the Atlanta, GA, facility. H. Mills, Beautimar Marble Company, Inc., to B. Jordan, EPA:ESD. Database #: 411. October 1993. Response to Section 114 screening information request for the Raleigh, NC, facility. R. Skaggs/E. Slavkovsky, Beaver Coaches, Inc., to B. Jordan, EPA:ESD. Database #: 457. August 31, 1993. Response to Section 114 screening information request for the Bend, OR, facility. J. Bendenbaugh, Benden-Baugh Products, Inc., to B. Jordan, EPA:ESD. Database #: 213. August 30, 1993. Response to Section 114 screening information request for the Laurens, SC, facility. D. LeGros, Bedford Reinforced Plastics, to B. Jordan, EPA:ESD. Database #: 123. No date. Response to Section 114 screening information request for the Bedford, PA, facility. G. Wilson, Beetle Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 279. August 31, 1993. Response to Section 114 screening information request for the Ardmore, OK, facility.
II-D-82
II-D-83
II-D-84
II-D-85
II-D-86
II-D-87
II-D-88
II-D-89
II-D-90
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-91
Description B. Henne, Bemis Manufacturing Company, to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that the Sheboygan Falls, WI, facility is not in the reinforced plastics source category. K. McCann, Beverly Pacific Company, to B. Jordan, EPA:ESD. Database #: 330. September 14, 1993. Response to Section 114 screening information request for the Redmond, OR, facility. N. DiPaolo, Beverly Pattern, Inc., to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Beverly, MA, facility is not in the reinforced plastics source category. C. Billings, Billings Tile & Marble, Inc., to B. Jordan, EPA:ESD. Database #: 215. August 30, 1993 Response to Section 114 screening information request for the Munford, TN, facility. R. Thomas, Bittner Industries, Inc., to B. Jordan, EPA:ESD. Database #: 133. August 24, 1993. Response to Section 114 screening information request for the Prichard, AL, facility. J. Swanson, Biwax Corporation, to B. Jordan, EPA:ESD. Database #: 260. August 30, 1993. Response to Section 114 screening information request for the Des Plaines, IL, facility. J. Cropper, Blue Dolphin Fiberglass Pools, to B. Jordan, EPA:ESD. Database #: 407. October 4, 1993. Response to Section 114 screening information request for the Largo, FL, facility. T. Koury, Blue Water Plastics, Inc., to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that the Marysville, MI, facility is not in the reinforced plastics source category. M. Everhart, Boeing Wichita, to B. Jordan, EPA:ESD. Database #: 338. September 14, 1993. Response to Section 114 screening information request for the Wichita, KS, facility. J. Fields, Bolfing Brothers Marble, Inc., to B. Jordan, EPA:ESD. Database #: 289. August 24, 1993. Response to Section 114 screening information request for the Houston, TX, facility.
II-D-92
II-D-93
II-D-94
II-D-95
II-D-96
II-D-97
II-D-98
II-D-99
II-D-100
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-101
Description S. Kavanaugh, Bowie Manufacturing Inc., to B. Jordan, EPA:ESD. Database #: 175. September 8, 1993. Response to Section 114 screening information request for the Lake City, IA, facility. T. Schwenk, Bradley Specialty Corporation, to B. Jordan, EPA:ESD. Database #: 370. September 15, 1993. Response to Section 114 screening information request for the Shartlesville, PA, facility. T. Jackson, Brady USA, Inc., to B. Jordan, EPA:ESD. Database #: 100. No date. Response to Section 114 screening information request for the Glendale, WI, facility. J. Corbit, Bremen Glas, Inc., to B. Jordan, EPA:ESD. Database #: 168. August 23, 1993. Response to Section 114 screening information request for the Cedar Rapids, IA, facility. J. Kronewitter, Bremen Glas, Inc., to B. Jordan, EPA:ESD. Database #: 209. August 23, 1993. Response to Section 114 screening information request for the Bremen, IN, facility. J. Kazan, Bridgewater Protective, to B. Jordan, EPA:ESD. Database #: 173. September 8, 1993. Response to Section 114 screening information request for the Bridgewater, NJ, facility. C. Van Liew, Bristol Fiberlite Industries, to B. Jordan, EPA:ESD. Database #: 42. August 18, 1993. Response to Section 114 screening information request for the Santa Ana, CA, facility. P. Leichsenring, Brooks Products, Inc., to B. Jordan, EPA:ESD. August 2, 1993. Response to Section 114 screening information request for the Cucamonga, CA, facility. B. Baiden, Brunnel Products of Florida, Inc., to B. Jordan, EPA:ESD. Database #: 64. August 20, 1993. Response to Section 114 screening information request for the St. Petersburg, FL, facility. V. Shah, Budd Company, to B. Jordan, EPA:ESD. Database #: 400. September 17, 1993. Response to Section 114 screening information request for the Carey, OH, facility.
II-D-102
II-D-103
II-D-104
II-D-105
II-D-106
II-D-107
II-D-108
II-D-109
II-D-110
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-111
Description J. Holiday, Builders Marble, Inc., to B. Jordan, EPA:ESD. Database #: 396. September 27, 1993. Response to Section 114 screening information request for the Jackson, MS, facility. R. Zurek, Bulk Molding Compounds, Inc., to B. Jordan, EPA:ESD. Database #: 478. October 15, 1993. Response to Section 114 screening information request for the St. Charles, IL, facility. D. Fabian, Burtin Corporation, to B. Jordan, EPA:ESD. July 27, 1993. Letter stating that the Santa Ana, CA, facility is not in the reinforced plastics source category. K. Parks, C & K Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 245. August 24, 1993. Response to Section 114 screening information request for the Millersburg, IN, facility. A. Kaeding, CDR Systems, to B. Jordan, EPA:ESD. Database #: 284 and 285. August 31, 1993. Response to Section 114 screening information request for the Palatka, FL, and Corcoran, CA, facilities. S. Brogli, CYRO Industries, to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the Sanford, ME, facility is not in the reinforced plastics source category. K. Lautzenheiser, Caldwell Button Company, to B. Jordan, EPA:ESD. Database #: 137. August 26, 1993. Response to Section 114 screening information request for the Tarboro, NC, facility. H. Hoffman, California Industrial Fabrics, Inc., to B. Jordan, EPA:ESD. No date. Letter stating that the San Diego, CA, facility is not in the reinforced plastics source category. M. Short, Cameo Marble, to B. Jordan, EPA:ESD. Database #: 339. September 14, 1993. Response to Section 114 screening information request for the New Albany, IN, facility. J. Ellis, Cannon USA, Inc., to B. Jordan, EPA:ESD. August 4, 1993. Letter stating that the Mars, PA, facility is not in the reinforced plastics source category.
II-D-112
II-D-113
II-D-114
II-D-115
II-D-116
II-D-117
II-D-118
II-D-119
II-D-120
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-121
Description T. Wood, Capital Marble Creations, Inc., to B. Jordan, EPA:ESD. Database #: 128. August 26, 1993. Response to Section 114 screening information request for the Lillington, NC, facility. P. Fertig, Capon Valley Marble, Inc., to B. Jordan, EPA:ESD. Database #: 399. September 24, 1993. Response to Section 114 screening information request for the Moorefield, WV, facility. M. Eudy, Carolina Counters, to B. Jordan, EPA:ESD. Database #: 126. August 30, 1993. Response to Section 114 screening information request for the Locust, NC, facility. B. Lee, Carolina Cultured Marble, Inc., to B. Jordan, EPA:ESD. Database #: 332. September 13, 1993. Response to Section 114 screening information request for the Mt. Pleasant, NC, facility. J. Briggs/J. Session, Carsonite International Corporation, to B. Jordan, EPA:ESD. Database #: 380. September 23, 1993. Response to Section 114 screening information request for the Carson City, NV, facility. J. Schultz, Central Marble Products, Inc., to B. Jordan, EPA:ESD. Database #: 127. August 26, 1993. Response to Section 114 screening information request for the Rice, MN, facility. S. Griffin, Century Insulation Manufacturing Co., to M. Strum, EPA:OAQPS. No Date. Letter stating that the Union, MS, facility is not in the reinforced plastics source category. G. Albers, Century Manufacturing Company, to B. Jordan, EPA:ESD. Database #: 382. August 31, 1993. Response to Section 114 screening information request for the Aurora, NE, facility. R. Mauren, Century Marble Co., Inc., to B. Jordan, EPA:ESD. Database #: 614. November 8, 1993. Response to Section 114 screening information request for the Indianapolis, IN, facility. R. Smalley, Ceramic Cooling Tower Company, to B. Jordan, EPA:ESD. Database #: 164. September 8, 1993. Response to Section 114 screening information request for the Ft. Worth, TX, facility.
II-D-122
II-D-123
II-D-124
II-D-125
II-D-126
II-D-127
II-D-128
II-D-129
II-D-130
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-131
Description M. Brown, Chance Operations, Inc., to B. Jordan, EPA:ESD. Database #: 57. No date. Response to Section 114 screening information request for the Wichita, KS, facility. B. Hendricks, Channel Master, to B. Jordan, EPA:ESD. Database #: 346. September 14, 1993. Response to Section 114 screening information request for the Smithfield, NC, facility. R. Reid, Charles Ross & Son Company, to B. Jordan. August 6, 1993. Letter stating that the Hauppauge, NY, facility is not in the reinforced plastics source category. W. Wells, Charloma Fiberglass, Inc., to B. Jordan, EPA:ESD. Database #: 304. September 3, 1993. Response to Section 114 screening information request for the Cherryvale, KS, facility. J. Hayes, Chippewa Marble Company, Inc., to B. Jordan, EPA:ESD. Database #: 229. August 30, 1993. Response to Section 114 screening information request for the Columbia Station, OH, facility. J. Weiss, Ciba-Geigy Corporation, to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that the Hawthorne, NY, facility is not in the reinforced plastics source category. F. Hernandez, Clark Manufacturing, to B. Jordan, EPA:ESD. Database #: 162. September 8, 1993. Response to Section 114 screening information request for the Chino, CA, facility. C. Sanchez, Classic Motor Carriages, to B. Jordan, EPA:ESD. Database #: 200. September 9, 1993. Response to Section 114 screening information request for the Miami, FL, facility. Coastal Engineered Products Company, to B. Jordan, EPA:ESD. Database #: 381. September 28, 1993. Response to Section 114 screening information request for the Varnville, SC, facility. G. Sadler, Coleman Powermate, Inc., to B. Jordan, EPA:ESD. August 24, 1993. Letter stating that the Kearney, NE, facility is not in the reinforced plastics source category.
II-D-132
II-D-133
II-D-134
II-D-135
II-D-136
II-D-137
II-D-138
II-D-139
II-D-140
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-141
Description R. Craft, Columbia Specialties, Inc., to B. Jordan, EPA:ESD. Database #: 75. August 12, 1993. Response to Section 114 screening information request for the Columbia, TN, facility. J. Weidaw, Combibloc, Inc. to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that the Columbus, OH, facility is not in the reinforced plastics source category. N. Cameron, Como Plastics, to B. Jordan, EPA:ESD. August 17, 1993. Letter stating that the Columbus, IN, facility is not in the reinforced plastics source category. J. Valente, Component Plastics, Inc., to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that the Eglin, IL, facility is not in the reinforced plastics source category. J. McCloskey, Composites USA, Inc., to B. Jordan, EPA:ESD. Database #: 308. September 3, 1983. Response to Section 114 screening information request for the Bear, DE, facility. D. Gibbons, Compounding Technology, Inc., to B. Jordan, EPA:ESD. August 30, 1993. Letter stating that the Corona, CA, facility is not in the reinforced plastics source category. G. Higgins, Comtech Antenna Systems, Inc., to B. Jordan, EPA:ESD. Database #: 310. September 3, 1993. Response to Section 114 screening information request for the St. Cloud, IL, facility. M. Rumbaugh, Concept Fiberglass Homes, Inc., to B. Jordan, EPA:ESD. Database #: 108. August 24, 1993. Response to Section 114 screening information request for the Grand Island, NE, facility. D. Burke, Concept Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 276. August 31, 1993. Response to Section 114 screening information request for the High Point, NC, facility. J. Cheek, Conley Corporation, to B. Jordan, EPA:ESD. Database #: 392. September 20, 1993. Response to Section 114 screening information request for the Tulsa, OK, facility.
II-D-142
II-D-143
II-D-144
II-D-145
II-D-146
II-D-147
II-D-148
II-D-149
II-D-150
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-151
Description K. Farley, Conquest Marine Manufacturing, Inc., to B. Jordan, EPA:ESD. Database #: 241. August 30, 1993. Response to Section 114 screening information request for the West Frankfort, IL, facility. J. Von Slyke, Contemporary Products, Inc., to B. Jordan, EPA:ESD. Database #: 265. No date. Response to Section 114 screening information request for the Menomonee Falls, WI, facility. B. Gardner, Continental Camper Company, Inc., to B. Jordan, EPA:ESD. Database #: 197. September 9, 1993. Response to Section 114 screening information request for the La Follette, TN, facility. J. Karloske, Cook Composites and Polymers Company, to B. Jordan, EPA:ESD. August 17, 1993. Letter stating that the Kansas City, MO, facility is not in the reinforced plastics source category. J. Prior, Cor Tec Company, to B. Jordan, EPA:ESD. Database #: 119. August 26, 1993. Response to Section 114 screening information request for the Washington Court House, OH, facility. J. Stofiel, Corrosion Specialties, Inc., to B. Jordan, EPA:ESD. Database #: 610. November 15, 1993. Response to Section 114 screening information request for the Brush Prairie, WA, facility. R. Dulany, Country Coach, Inc., to B. Jordan, EPA:ESD. Database #: 374. No date. Response to Section 114 screening information request for the Junction City, OR, facility. R. Romberger, Covermaster, Inc., to B. Jordan, EPA:ESD. Database #: 363. September 14, 1993. Response to Section 114 screening information request for the Elkhart, IN, facility. A. Dover, Crain Enterprises, Inc., to B. Jordan, EPA:ESD. Database #: 31. August 23, 1993. Response to Section 114 screening information request for the Mount City, IL, facility. S. Marson, Creations by Carole, to B. Jordan, EPA:ESD. Database #: 379. September 21, 1993. Response to Section 114 screening information request for the Sevierville, TN, facility.
II-D-152
II-D-153
II-D-154
II-D-155
II-D-156
II-D-157
II-D-158
II-D-159
II-D-160
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-161
Description J. Tiller, Creative Marble, Inc., to B. Jordan, EPA:ESD. Database #: 94. August 26, 1993. Response to Section 114 screening information request for the Martinez, GA, facility. D. Evans, Creative Pultrusions, Inc., to B. Jordan, EPA:ESD. Database #: 110. August 24, 1993. Response to Section 114 screening information request for the Roswell, NM, facility. K. Barley, Creative Pultrusions, Inc., to B. Jordan, EPA:ESD. Database #: 306. September 13, 1993. Response to Section 114 screening information request for the Alum Bank, PA, facility. J. Schroeder, Crescent Plastics, Inc., to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Evansville, IN, facility is not in the reinforced plastics source category. D. Mahoney, Crosby Manufacturing Company, to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Crosby, MN, facility is not in the reinforced plastics source category. C. Gerard, Cultured Marble Products Ltd., to B. Jordan, EPA:ESD. Database #: 492. October 6, 1993. Response to Section 114 screening information request for the Sacramento, CA, facility. R. Edwards, Custom Fiberglass Manufacturing, to B. Jordan, EPA:ESD. Database #: 368. September 8, 1993. Response to Section 114 screening information request for the Long Beach, CA, facility. E. Loyet, Custom Foam Molders, Inc., to B. Jordan, EPA:ESD. August 31, 1993. Letter stating that the Foristell, MO, facility is not in the reinforced plastics source category. L. Kraft, Custom Marble, Inc., to B. Jordan, EPA:ESD. Database #: 165. September 2, 1993. Response to Section 114 screening information request for the Millstadt, IL, facility. P. Crystler, D & R Fabrication, Inc., to B. Jordan, EPA:ESD. Database #: 490. October 10, 1993. Response to Section 114 screening information request for the Greenville, MI, facility.
II-D-162
II-D-163
II-D-164
II-D-165
II-D-166
II-D-167
II-D-168
II-D-169
II-D-170
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-171
Description D. Hidding, Dana Molded Products, Inc., to B. Jordan, EPA:ESD. August 26, 1993. Letter stating that the Arlington Heights, IL, facility is not in the reinforced plastics source category. J. Bacher, Dasco Pro, Inc., to B. Jordan, EPA:ESD. Database #: 17. August 16, 1993. Response to Section 114 screening information request for the Rockford, IL, facility. J. Rodgers, Dekalb Molded Plastics, to B. Jordan EPA:ESD. July 29, 1993. Letter stating that the Butler, IN, facility is not in the reinforced plastics source category. B. Bichler, Delta Fiberglass Structures, Inc., to B. Jordan, EPA:ESD. Database #: 376. September 21, 1993. Response to Section 114 screening information request for the Salt Lake City, UT, facility. T. Walker, Delta Pacific Products, Inc., to B. Jordan, EPA:ESD. August 27, 1993. Letter stating that the Fremont, CA, facility is not in the reinforced plastics source category. B. Guy, Delta Process Equipment, Inc., to M. Strum, EPA:OAQPS. August 27, 1993. Letter stating that only the Delta Fiberglass division is in the reinforced plastics source category and has already received a Section 114 questionnaire. A. Sheals, Dexter Corporation, to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the Industry, CA, facility is not in the reinforced plastics source category. K. Stammer, Diamond Coach Corporation, to B. Jordan, EPA:ESD. Database #: 405. October 4, 1993. Response to Section 114 screening information request for the Oswego, KS, facility. G. Baker, Diamond Fiberglass, to B. Jordan, EPA:ESD. Database #: 446. September 1, 1993. Response to Section 114 screening information request for the Victoria, TX, facility. R. Scalise, Dickmont Plastics Corporation, To B. Jordan, EPA:ESD. August 27, 1993. Letter stating that the Stamford, CT, facility is not in the reinforced plastics source category.
II-D-172
II-D-173
II-D-174
II-D-175
II-D-176
II-D-177
II-D-178
II-D-179
II-D-180
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-181
Description D. Webb/J. Onzik, Dickten & Masch Manufacturing Company, to B. Jordan, EPA:ESD. Database #: 192. September 10, 1993. Response to Section 114 screening information request for the Nashotah, WI, facility. B. Caylon, Dietzgen Corporation, to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Des Plaines, IL, facility is not in the reinforced plastics source category. D. Baumstark, Dimensional Plastics Corporation, to B. Jordan, EPA:ESD. Database #: 56. August 20, 1993. Response to Section 114 screening information request for the Hialeah, FL, facility. V. Kallenborn, Dom-Fab, Inc., to B. Jordan, EPA:ESD. Database #: 29. August 31 1993. Response to Section 114 screening information request for the Erglanger, KY, facility. J. Alderman, Dow Chemical, to B. Jordan, EPA:ESD. August 27, 1993. Letter stating that Dow North America is not in the reinforced plastics source category. L. Yates, Dow Chemical USA, to B. Jordan, EPA:ESD. Database #: 214. August 30, 1993. Response to Section 114 screening information request for the Russelville, AR, facility. J. Van Houtte, Dresser Manufacturing Division, to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the Bradford, PA, facility is not in the reinforced plastics source category. S. McClendon, Drew Foam Companies, Inc., to B. Jordan, EPA:ESD. August 25, 1993. Letter stating that the Monticello, AR, facility is not in the reinforced plastics source category. I. Vogel, Dyplast Foam Insulation Industries, to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that Dyplast Foam Insulation Industries has sold its facility to Apache Products Company. T. Huff, E-T-M Enterprises, Inc., to B. Jordan, EPA:ESD. Database #: 480. October 15, 1993. Response to Section 114 screening information request for the Grand Ledge, MI, facility.
II-D-182
II-D-183
II-D-184
II-D-185
II-D-186
II-D-187
II-D-188
II-D-189
II-D-190
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-191
Description M. Bownie, Brittney Inc., E. D. Industries, Inc., to B. Jordan, EPA:ESD. Database #: 351. September 14, 1993. Response to Section 114 screening information request for the Rogersville, MO, facility. R. Parrella, E. Parrella Company, Inc., to B. Jordan, EPA:ESD. Database #: 104. August 30, 1993. Response to Section 114 screening information request for the Medway, MA, facility. G. Fraze, E.I. du Pont de Nemours & Company, to B. Jordan, EPA:ESD. Database #: 202. August 31, 1993. Response to Section 114 screening information request for the Newark, DE, facility. J. Chandler, EFP Corportation, to B. Jordan, EPA:ESD. July 29, 1993. Letter stating that the Elkhart, IN, facility is not in the reinforced plastics source category. C. Wicks, Eagle Craft, Inc., to B. Jordan, EPA:ESD. Database #: 206. August 30, 1993. Response to Section 114 screening information request for the Plymouth, IN, facility. D. McCrady, Eagle-Picher Industries, Inc., to B. Jordan, EPA:ESD. Database #: 187. September 7, 1993. Response to Section 114 screening information request for the Grabill, IN, facility. B. Fordanish, Eagle-Picher Industries, Inc., to B. Jordan, EPA:ESD. Database #: 188. September 7, 1993. Response to Section 114 screening information request for the Huntington, IN, facility. D. Biedenweg, Eagle-Picher Industries, Inc., to B. Jordan, EPA:ESD. Database #: 189. September 7, 1993. Response to Section 114 screening information request for the Ashley, IN, facility. J. Goodison, Eastman Kodak Company, to B. Jordan, EPA:ESD. Database #: 203. August 31, 1993. Response to Section 114 screening information request for the Rochester, NY, facility. J. Marcis, Easton Industries, Ltd., to B. Jordan, EPA:ESD. Database #: 232. September 1, 1993. Response to Section 114 screening information request for the Myrtle Beach, SC, facility.
II-D-192
II-D-193
II-D-194
II-D-195
II-D-196
II-D-197
II-D-198
II-D-199
II-D-200
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-201
Description R. Putnam, Eckler's, to B. Jordan, EPA:ESD. Database #: 336. September 9, 1993. Response to Section 114 screening information request for the Titusville, FL, facility. G. Leroux, Ecowater Systems, to B. Jordan, EPA:ESD. Database #: 85. August 27, 1993. Response to Section 114 screening information request for the Woodbury, MN, facility. D. Ramazzotti, Edge Sweets Company, to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Grand Rapids, MI, facility is not in the reinforced plastics source category. C. Hennessey, Edlon Products, Inc., to B. Jordan, EPA:ESD. August 4, 1993. Letter stating that the Avondale, PA, facility is not in the reinforced plastics source category. W. Peters, Electric-Glass, Inc., to B. Jordan, EPA:ESD. Database #: 26. August 23, 1993. Response to Section 114 screening information request for the Jackson, TN, facility. R. Loe, Elegant Marble Products, Inc., to B. Jordan, EPA:ESD. Database #: 81. August 27, 1993. Response to Section 114 screening information request for the Middletown, PA, facility. S. Fernandes, Elegant Marble, Inc., to B. Jordan, EPA:ESD. Database #: 9. August 13, 1993. Response to Section 114 screening information request for the Honolulu, HI, facility. P. Livermore, Eljer Industries, to B. Jordan, EPA:ESD. Database #: 47. August 17, 1993. Response to Section 114 screening information request for the Valdosta, GA, facility. M. Elliott, Elliott-Williams Company, Inc., to B. Jordan, EPA:ESD. July 29, 1993. Letter stating that the Indianapolis, IN, facility is not in the reinforced plastics source category. D. Marlow, Elmore Truck Accessories, Inc., to B. Jordan, EPA:ESD. Database #: 268. August 30, 1993. Response to Section 114 screening information request for the Elmore, MN, facility.
II-D-202
II-D-203
II-D-204
II-D-205
II-D-206
II-D-207
II-D-208
II-D-209
II-D-210
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-211
Description W. Grove, Emco-Williams, Inc., to B. Jordan, EPA:ESD. Database #: 259. August 30, 1993. Response to Section 114 screening information request for the Sevierville, TN, facility. D. Bradberry, Empire Marble Company, to B. Jordan, EPA:ESD. Database #: 132. August 24, 1993. Response to Section 114 screening information request for the Jackson, TN, facility. T. Haskins, Emsig Manufacturing Corporation, to B. Jordan, EPA:ESD. Database #: 489. October 6, 1993. Response to Section 114 screening information request for the Hudson, NY, facility. C. Phaup, Enduro Fiberglass Systems, Inc., to B. Jordan, EPA:ESD. Database #: 21. August 23, 1993. Response to Section 114 screening information request for the Houston, TX, facility. G. Burns, Epoch Industries, to B. Jordan, EPA:ESD. Database #: 377. September 21, 1993. Response to Section 114 screening information request for the Los Angeles, CA, facility. J. Benz, Ershigs, Inc., to B. Jordan, EPA:ESD. Database #: 472. No date. Response to Section 114 screening information request for the Wilson, NC, facility. J. Benz, Ershigs, Inc., to B. Jordan, EPA:ESD. Database #: 427. September 22, 1993. Response to Section 114 screening information request for the Bellingham, WA, facility. K. Eveland, Evelands, Inc., to B. Jordan, EPA:ESD. Database #: 12. August 6, 1993. Response to Section 114 screening information request for the Backus, MN, facility. G. Sheehy, Extrutech Plastics, Inc., to B. Jordan, EPA:ESD. August 28, 1993. Letter stating that the Manitowoc, WI, facility is not in the reinforced plastics source category. E. Bernheim, Exxene Corporation, to B. Jordan, EPA:ESD. August 31, 1993. Letter stating that the Corpus Christi, TX, facility is not in the reinforced plastics source category.
II-D-212
II-D-213
II-D-214
II-D-215
II-D-216
II-D-217
II-D-218
II-D-219
II-D-220
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-221
Description K. Long, F. E. Myers, to B. Jordan, EPA:ESD. Database #: 198. September 3, 1993. Response to Section 114 screening information request for the Ashland, OH, facility. R. Martinez, Faball Enterprises of Utah, to B. Jordan, EPA:ESD. Database #: 50. August 10, 1993. Response to Section 114 screening information request for the Clearfield, UT, facility. H. Niedworok, Federal Molding Company, to B. Jordan, EPA:ESD. Database #: 417. September 28, 1993. Response to Section 114 screening information request for the Sandford, NC, facility. C. Lauer, Ferro Corporation, to B. Jordan, EPA:ESD. Database #: 220. August 30, 1993. Response to Section 114 screening information request for the South Plainfield, NJ, facility. K. Rados, Ferro Corporation, to B. Jordan, EPA:ESD. August 26, 1993. Letter stating that the Plymouth, IN, facility is not in the reinforced plastics source category. B. Currie, Fiber Glass Systems, Inc., to B. Jordan, EPA:ESD. Database #: 253. August 30, 1993. Response to Section 114 screening information request for the San Antonio, TX, facility. D. Law, Fiber Pad, Inc., to B. Jordan, EPA:ESD. Database #: 395. September 27, 1993. Response to Section 114 screening information request for the Tulsa, OK, facility. L. Moore, Fibercast Company, to B. Jordan, EPA:ESD. Database #: 329. August 30, 1993. Response to Section 114 screening information request for the Sand Springs, OK, facility. R. Roepke, Fiberdome, Inc., to B. Jordan, EPA:ESD. Database #: 239. August 30, 1993. Response to Section 114 screening information request for the Lake Mills, WI, facility. S. Kelton, Fiberflex, Inc. to B. Jordan, EPA:ESD. Database #: 288. August 31, 1993. Response to Section 114 screening information request for the Big Spring, TX, facility.
II-D-222
II-D-223
II-D-224
II-D-225
II-D-226
II-D-227
II-D-228
II-D-229
II-D-230
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-231
Description C. Lowden, Fiberglas & Plastic, to B. Jordan, EPA:ESD. Database #: 261. August 30, 1993. Response to Section 114 screening information request for the Indianapolis, IN, facility. D. Morris, Fiberglass Engineering Corporation, to B. Jordan, EPA:ESD. Database #: 620. November 12, 1993. Response to Section 114 screening information request. L. Williams, Fiberlass Forms, Inc., to B. Jordan, EPA:ESD. Database #: 6. August 10, 1993. Response to Section 114 screening information request for the Independence, KS, facility. P. Chapman, Fiberglass Industries, Inc., to B. Jordan, EPA:ESD. Database #: 487. September 29, 1993. Response to Section 114 screening information request for the Fort Valley, GA, facility. K. Burns, Fiberglass Plus, to B. Jordan, EPA:ESD. Database #: 16. August 13, 1993. Response to Section 114 screening information request for the Biddeford, ME, facility. R. Theviault, Fiberglass Products, Inc., to B. Jordan, EPA:ESD. Database #: 500. September 30, 1993. Response to Section 114 screening information request for the Auburn, ME, facility. B. Henderson/T. Jones, Fiberglass Specialties, Inc., to B. Jordan, EPA:ESD. Database #: 401. September 24, 1993. Response to Section 114 screening information request for the Henderson, TX, facility. L. Bearg, Fiberglass Systems, Inc., to B. Jordan, EPA:ESD. Database #: 180. September 8, 1993. Response to Section 114 screening information request for the Boise, ID, facility. F. Mayfield, Fibergrate Corporation, to B. Jordan, EPA:ESD. Database #: 393. No date. Response to Section 114 screening information request for the Stephenville, TX, facility. R. Vasami, Fiberlux, Inc., to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Mount Vernon, NY, facility is not in the reinforced plastics source category.
II-D-232
II-D-233
II-D-234
II-D-235
II-D-236
II-D-237
II-D-238
II-D-239
II-D-240
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-241
Description J. Wilson, Fibertech Corporation, to B. Jordan, EPA:ESD. Database #: 516. October 25, 1993. Response to Section 114 screening information request for the Pendleton, SC, facility. J. Deim, Fibre Body Industries, Inc., to B. Jordan, EPA:ESD. Database #: 404. September 22, 1993. Response to Section 114 screening information request for the Swea City, IA, facility. H. Segars, Fibrenetics Inc., to B. Jordan, EPA:ESD. Database #: 20. August 24, 1993. Response to Section 114 screening information request for the Woodbridge, NJ, facility. R. Watkins, Fibrex Corporation, to B. Jordan, EPA:ESD. Database #: 331. September 2, 1993. Response to Section 114 screening information request for the Burlington, WA, facility. F. Meguiar, Finish Kare Products, Inc., to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the South El Monte, CA, facility is not in the reinforced plastics source category. A. Hunsicker, Flex-O-Glass, Inc., to M. Strum, EPA:OAQPS. July 30, 1993. Letter stating that the Chicago, IL, facility is not in the reinforced plastics source category. T. Davis, Florida Line of Astatula, Inc., to B. Jordan, EPA:ESD. Database #: 101. No date. Response to Section 114 screening information request for the Astatula, FL, facility. R. St. John, Florida Marble of Charlotte, to B. Jordan, EPA:ESD. Database #: 463. August 31, 1993. Response to Section 114 screening information request for the Charlotte Harbor, FL, facility. D. Lewis, Foam Plastics of NE, to B. Jordan, EPA:ESD. August 5, 1993. Letter stating that the Prospect, CT, facility is not in the reinforced plastics source category. J. Wilfong, Foamcoat Roofing and Coatings, to M. Strum, EPA:OAQPS. August 23, 1993. Letter stating that the Davisville, WV, facility is not in the reinforced plastics source category.
II-D-242
II-D-243
II-D-244
II-D-245
II-D-246
II-D-247
II-D-248
II-D-249
II-D-250
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-251
Description K. Miller, Ford Motor Company, to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the Ypsilanti, MI, facility is not in the reinforced plastics source category. J. Foreman, Foreman Industries, Inc., to B. Jordan, EPA:ESD. Database #: 442. September 1, 1993. Response to Section 114 screening information request for the Warsaw, IN, facility. P. Mee, Foremost Interiors Inc., to B. Jordan, EPA:ESD. Database #: 356. September 14, 1993. Response to Section 114 screening information request for the Rancho Cordova, CA, facility. M. Heydenreich, Foremost Machine Builders, Inc., to B. Jordan, EPA:ESD. August 5, 1993. Letter stating that the Fairfield, NJ, facility is not in the reinforced plastics source category. M. Williams, Formica Corporation, to B. Jordan, EPA:ESD. August 26, 1993. Letter stating that the Cincinnati, OH, facility is not in the reinforced plastics source category. D. McCracken, Fowler Manufacturing Inc., to B. Jordan, EPA:ESD. Database #: 93. August 26, 1993. Response to Section 114 screening information request for the Atlantic Beach, FL, facility. W. Corban, Francis Industries, Inc., to B. Jordan, EPA:ESD. Database #: 244. August 30, 1993. Response to Section 114 screening information request for the Pataskala, OH, facility. C. Tyler, Frankfort Plastics, to B. Jordan, EPA:ESD. Database #: 90. August 24, 1993. Response to Section 114 screening information request for the Frankfort, KY, facility. M. Wilcox, G & W Plastics, to B. Jordan, EPA:ESD. Database #: 327. September 7, 1993. Response to Section 114 screening information request for the Hickory, NC, facility. A. Workman, G. W. Fiberglass, Inc., to B. Jordan, EPA:ESD. Database #: 252. August 30, 1993. Response to Section 114 screening information request for the O'Fallon, MO, facility.
II-D-252
II-D-253
II-D-254
II-D-255
II-D-256
II-D-257
II-D-258
II-D-259
II-D-260
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-261
Description R. Lester, GE Company, to B. Jordan, EPA:ESD. Database #: 367. September 14, 1993. Response to Section 114 screening information request for the Rome, GA, facility. G. Shaver, GE Company, to B. Jordan, EPA:ESD. Database #: 477. October 15, 1993. Response to Section 114 screening information request for the Mebane, NC, facility. J. Gould, GE Motors, to M. Strum, EPA:OAQPS. August 11, 1993. Letter stating that the Fort Wayne, IN, facility is not in the reinforced plastics source category. G. Miller, GHM, Inc., to B. Jordan, EPA:ESD. Database #: 257. August 30, 1993. Response to Section 114 screening information request for the Orwigsburg, PA, facility. C. Eaton, GMC, to B. Jordan, EPA:ESD. Database #: 195. September 3, 1993. Response to Section 114 screening information request for the Monroe, LA, facility. G. Zinser, GPI Corporation, to B. Jordan, EPA:ESD. Database #: 280. August 31, 1993. Response to Section 114 screening information request for the Schofield, WI, facility. R. Mouw, GPM Industries, Inc., to B. Jordan, EPA:ESD. Database #: 4. No date. Response to Section 114 screening information request for the Holland, MI, facility. L. Gervais, Gazelle Products, to B. Jordan, EPA:ESD. September 27, 1993. Letter stating that the company has been sold to Americon. L. Dodyk/J. Wusterbarth, GenCorp Automotive, to B. Jordan, EPA:ESD. Database #: 387. September 29, 1993. Response to Section 114 screening information request for the Marion, IN, facility. E. Nguyen/J. Braman, Gencorp Automotive, to M. Strum, EPA:OAQPS. Database #: 386. September 28, 1993. Response to Section 114 screening information request for the Ionia, MI, facility. C. Boehm, General Electric Company, to B. Jordan, EPA:ESD. Database #: 115. August 18, 1993. Response to Section 114 screening information request for the Plainville, CT, facility.
II-D-262
II-D-263
II-D-264
II-D-265
II-D-266
II-D-267
II-D-268 II-D-269
II-D-270
II-D-271
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-272
Description D. Gregg, General Marble Company, to B. Jordan, EPA:ESD. Database #: 171. September 13, 1993. Response to Section 114 screening information request for the Lincolnton, NC, facility. R. Bergvall, General Marble Company, to B. Jordan, EPA:ESD. Database #: 185. September 10, 1993. Response to Section 114 screening information request for the Hornell, NY, facility. D. Hertzler, General Marble Company, to B. Jordan, EPA:ESD. Database #: 163. September 2, 1993. Response to Section 114 screening information request for the Guasti, CA, facility. W. Listermann, General Polymers Corporation, to B. Jordan, EPA:ESD. August 5, 1993. Letter stating that the Cincinnati, OH, facility is not in the reinforced plastics source category. R. Bushnell, George Mann & Company Inc., to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the Providence, RI, facility is not in the reinforced plastics source category. R. Brady, George Morrell Industries, to B. Jordan, EPA:ESD. Database #: 415. September 28, 1993. Response to Section 114 screening information request for the Muskegon, MI, facility. M. Smith, Gesmar Corporation, to B. Jordan, EPA:ESD. Database #: 234. August 26, 1993. Response to Section 114 screening information request for the Richmond, VA, facility. S. Crooks, Gibbon Fiberglass, to B. Jordan, EPA:ESD. Database #: 445. September 1, 1993. Response to Section 114 screening information request for the Gibbon, NE, facility. J. Goode, Gilbraltar Plant-Wilsonart, to B. Jordan, EPA:ESD. Database #: 485. October 8, 1993. Response to Section 114 screening information request for the Temple, TX, facility. B. Sanders, Gilbert International, Inc., to B. Jordan, EPA:ESD. November 5, 1993. Response to Section 114 screening information request for the Fort Worth, TX, facility.
II-D-273
II-D-274
II-D-275
II-D-276
II-D-277
II-D-278
II-D-279
II-D-280
II-D-281
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-282
Description G. Clark, Glas Masters Inc., to B. Jordan, EPA:ESD. Database #: 302. September 3, 1993. Response to Section 114 screening information request for the White Pigeon, MI, facility. K. Bass, Glasforms, Inc., to B. Jordan, EPA:ESD. Database #: 70. August 20, 1993. Response to Section 114 screening information request for the San Jose, CA, facility. W. Tillman, Glasgo Plastics Inc., to B. Jordan, EPA:ESD. Database #: 296. August 31, 1993. Response to Section 114 screening information request for the Springfield, OH, facility. L. Echenique, Glasspec Associates Ltd., to B. Jordan, EPA:ESD. Database #: 262. August 30, 1993. Response to Section 114 screening information request for the Miami, FL, facility. J. Hannegrefs, Glasstite, Inc., to B. Jordan, EPA:ESD. Database #: 325. September 7, 1993. Response to Section 114 screening information request for the Dunnell, MN, facility. D. Rollen, Glasteel Industrial Laminates, to B. Jordan, EPA:ESD. Database #: 161. September 8, 1993. Response to Section 114 screening information request for the Collierville, TN, facility. T. Schenk, Global Glass, Inc., to B. Jordan, EPA:ESD. Database #: 375. September 21, 1993. Response to Section 114 screening information request for the Elkhart, IN, facility. F. Roybal, Gold Shield, Inc., to B. Jordan, EPA:ESD. Database #: 300. September 2, 1993. Response to Section 114 screening information request for the Fontana, CA, facility. F. Roybal, Gold Shield Fiberglass Inc., to B. Jordan, EPA:ESD. Database #: 375. September 3, 1993. Response to Section 114 screening information request for the Decatur, IN, facility. P. Penny, Gorman-Rupp Company, to B. Jordan, EPA:ESD. Database #: 13. August 18, 1993. Response to Section 114 screening information request for the Mansfield, OH, facility.
II-D-283
II-D-284
II-D-285
II-D-286
II-D-287
II-D-288
II-D-289
II-D-290
II-D-291
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-292
Description G. House, Gougeon Brothers, Inc., to B. Jordan, EPA:ESD. September 14, 1993. Letter stating that the Bay City, MI, facility is not in the reinforced plastics source category. M. McDavid, Gould Shawmut, to B. Jordan, EPA:ESD. Database #: 391. September 20, 1993. Response to Section 114 screening information request for the Marble Falls, TX, facility. D. Waldbillig, Goulds Pumps Inc., to B. Jordan, EPA:ESD. Database #: 419. September 17, 1993. Response to Section 114 screening information request for the Penn Yan, NY, facility. D. Hoffman, Grady White Boats, to B. Jordan, EPA:ESD. Database #: 403. September 22, 1993. Response to Section 114 screening information request for the Greenville, NC, facility. E. Argent, Grafil, Inc., to M. Strum, EPA:OAQPS. August 9, 1993. Letter stating that the Sacramento, CA, facility is not in the reinforced plastics source category. S. Meyer, Grayson Tool Company, to B. Jordan, EPA:ESD. Database #: 1. August 10, 1993. Response to Section 114 screening information request for the Minden, NE, facility. R. Mullinix/D. Semler, Great Dane Trailers, Inc., to B. Jordan, EPA:ESD. Database #: 429. September 22, 1993. Response to Section 114 screening information request for the Brazil, IN, facility. J. Laus, Great Lakes Plastics Corporation, to B. Jordan, EPA:ESD. Database #: 349. September 2, 1993. Response to Section 114 screening information request for the Hancock, MI, facility. P. DiDonato, Gregstrom Corporation, to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the Woburn, MA, facility is not in the reinforced plastics source category. R. Hayes, Gruber Systems, Inc., to B. Jordan, EPA:ESD. Database #: 358. September 14, 1993. Response to Section 114 screening information request for the Valencia, CA, facility.
II-D-293
II-D-294
II-D-295
II-D-296
II-D-297
II-D-298
II-D-299
II-D-300
II-D-301
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-302
Description J. Quinn, H & R Industries Inc., to B. Jordan, EPA:ESD. Database #: 362. September 9, 1993. Response to Section 114 screening information request for the Beecher, IL, facility. R. Byrd, Hackney Brothers Inc., to B. Jordan, EPA:ESD. Database #: 278. August 31, 1993. Response to Section 114 screening information request for the Wilson, NC, facility. B. Sard, Hallmark Plastics Inc., to B. Jordan, EPA:ESD. November 29, 1993. Letter stating that the Ft. Worth, TX, facility is not in the reinforced plastics source category. M. Kuhar, Hamilton Beach, to B. Jordan, EPA:ESD. September 8, 1993. Letter stating that the Glen Allen, VA, facility is not in the reinforced plastics source category. J. Hiser, Hartzell Fan Inc., to B. Jordan, EPA:ESD. Database #: 312. September 7, 1993. Response to Section 114 screening information request for the Piqua, OH, facility. P. Glashauser, Hasbrouck Plastics Inc., to B. Jordan, EPA:ESD. Database #: 473. October 6, 1993. Response to Section 114 screening information request for the Lake View, NY, facility. G. Nicholson, Hastings Group Inc., to B. Jordan, EPA:ESD. Database #: 397. September 24, 1993. Response to Section 114 screening information request for the Belding, MI, facility. J. Moralis, Hastings Plastics Company, to B. Jordan, EPA:ESD. August 31, 1993. Letter stating that the Santa Monica, CA, facility is not in the reinforced plastics source category. T. Pfister, Haysite Reinforced Plastics, to B. Jordan, EPA:ESD. Database #: 303. September 3, 1993. Response to Section 114 screening information request for the Erie, PA, facility. E. Knapp/K. Macrander, Hemco Corporation, to B. Jordan, EPA:ESD. Database #: 497. October 6, 1993. Response to Section 114 screening information request for the Independence, MO, facility.
II-D-303
II-D-304
II-D-305
II-D-306
II-D-307
II-D-308
II-D-309
II-D-310
II-D-311
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-312
Description J. Harrill, Henredon Furniture, to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the Spruce Pine, NC, facility is not in the reinforced plastics source category. S. Jew, Hercules, Inc., to B. Jordan, EPA:ESD. Database #: 468. September 10, 1993. Response to Section 114 screening information request for the Magna, UT, facility. S. Leather, Heritage Marble of Ohio, Inc., to B. Jordan, EPA:ESD. Database #: 27. August 23, 1993. Response to Section 114 screening information request for the Columbus, OH, facility. S. Hess, Hess County Industries, Inc., to B. Jordan, EPA:ESD. Database #: 11. August 6, 1993. Response to Section 114 screening information request for the Wheeling, WV, facility. L. Grant, Hobart TAFA Technologies, Inc., to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the Concord, NH, facility is not in the reinforced plastics source category. K. Anderson, Holiday Rambler Corporation, to B. Jordan, EPA:ESD. Database #: 23. August 19, 1993. Response to Section 114 screening information request for the Wakarusa, IN, facility. M. Hood, Hood Manufacturing Inc., to B. Jordan, EPA:ESD. Database #: 231. August 30, 1993. Response to Section 114 screening information request for the Santa Ana, CA, facility. R. Hughes, House of Marble Inc., to B. Jordan, EPA:ESD. Database #: 494. October 6, 1993. Response to Section 114 screening information request for the Little Rock, AR, facility. R. Witzigreuter/N. Dehmlow, Hy-Tec Fiberglass Inc., to B. Jordan, EPA:ESD. Database #: 378. September 21, 1993. Response to Section 114 screening information request for the Ft. Wayne, IN, facility. I. Pena, I. M. Pena Inc., to B. Jordan, EPA:ESD. Database #: 39. August 18, 1993. Response to Section 114 screening information request for the Houston, TX, facility.
II-D-313
II-D-314
II-D-315
II-D-316
II-D-317
II-D-318
II-D-319
II-D-320
II-D-321
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-322
Description C. Duthler, ICI Composite Inc., to B. Jordan, EPA:ESD. Database #: 525. October 29, 1993. Response to Section 114 screening information request for the Tempe, AZ, facility. G. Gilmore, IKG Industries, to B. Jordan, EPA:ESD. Database #: 388. September 20, 1993. Response to Section 114 screening information request for the Nashville, TN, facility. R. Kasemeyer, ISPA Company, to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the Baltimore, MD, facility is not in the reinforced plastics source category. G. Robins, Images Fiberglass Products, to B. Jordan, EPA:ESD. Database #: 30. September 1, 1993. Response to Section 114 screening information request for the Erwin, TX, facility. J. Rhodes, Imco Reinforced Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 219. August 19, 1993. Response to Section 114 screening information request for the Moorestown, NJ, facility. C. Worsley, Imperial Marble Corporation, to B. Jordan, EPA:ESD. Database #: 263. August 30, 1993. Response to Section 114 screening information request for the Somonauk, IL, facility. W. Hannan, Imperial Marble, Inc., to B. Jordan, EPA:ESD. September 17, 1993. Letter stating that the company is no longer in business. D. Zint, Indian Industries, to B. Jordan, EPA:ESD. Database #: 36. August 20, 1993. Response to Section 114 screening information request for the Evansville, IN, facility. J. Coleman, Industrial Diebectrics Inc., to B. Jordan, EPA:ESD. Database #: 76. August 27, 1993. Response to Section 114 screening information request for the Noblesville, IN, facility. K. Kaleps, Industrial Fiberglass Specialties, Inc., to B. Jordan, EPA:ESD. Database #: 613. November 8, 1993. Response to Section 114 screening information request for the Dayton, OH, facility.
II-D-323
II-D-324
II-D-325
II-D-326
II-D-327
II-D-328
II-D-329
II-D-330
II-D-331
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-332
Description W. Williams/B. Reid, Industrial Linings Inc., to B. Jordan, EPA:ESD. Database #: 406. October 4, 1993. Response to Section 114 screening information request for the Theodore, AL, facility. G. West, Insteel Construction Systems, Inc., to B. Jordan, EPA:ESD. July 30, 1993. Letter stating that the Brunswick, GA, facility in not in the reinforced plastics source category. R. Estock, Insul-Board, Inc. to B. Jordan, EPA:ESD. August 23, 1993. Letter stating that the Erie, PA, facility is not in the reinforced plastics source category. A. Helton, Insulaire, Inc., to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the Gainsville, GA, facility is not in the reinforced plastics source category. G. Barlow, Insulated Building Systems, Inc., to B. Jordan, EPA:ESD. August 23, 1993. Letter stating that the Winchester, VA, facility is not in the reinforced plastics source category. R. Anderson, Insulation Technology, Inc., to M. Strum, EPA:OAQPS. August 23, 1993. Letter stating that the Bridgewater, MA, facility is not in the reinforced plastics source category. L. Heston, International Grating, Inc., to B. Jordan EPA:ESD. Database #: 389. September 22, 1993. Response to Section 114 screening information request for the Houston, TX, facility. M. Anderson/N. Dehmlon, International Marble Inc., to B. Jordan, EPA:ESD. Database #: 194. No Date. Response to Section 114 screening information request for the Woodstock, GA, facility. R. Dolder, International Reinforced Plastics, to B. Jordan, EPA:ESD. Database #: 428. September 22, 1993. Response to Section 114 screening information request for the Denmark, SC, facility. R. Greenwood, Iten Industries, to B. Jordan, EPA:ESD. Database #: 243. August 30, 1993. Response to Section 114 screening information request for the Ashtabula, OH, facility.
II-D-333
II-D-334
II-D-335
II-D-336
II-D-337
II-D-338
II-D-339
II-D-340
II-D-341
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-342
Description D. Wendt, JRLON, Inc., to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the Palmyra, NY, facility is not in the reinforced plastics source category. S. Holland, Jade Engineered PLastics, Inc., to B. Jordan, EPA:ESD. August 17, 1993. Letter stating that the Bristol, RI, facility is not in the reinforced plastics source category. M. Solda, Jamison Plastic Corporation, to M. Strum, EPA:OAQPS. August 19, 1993. Letter stating that the Allentown, PA, facility is currently not producing reinforced plastics. L. Northam, Janco Products Inc., to B. Jordan, EPA:ESD. Database #: 210. August 30, 1993. Response to Section 114 screening information request for the Mishawaka, IN, facility. J. Bline, Jason Industries, Inc., to B. Jordan, EPA:ESD. Database #: 354. September 14, 1993. Response to Section 114 screening information request for the Elkhart, IN, facility. R. Jacuzzi/S. Putnam, Jason International Inc., to B. Jordan, EPA:ESD. Database #: 196. September 9, 1993. Response to Section 114 screening information request for the Little Rock, AR, facility. C. Nathan, Jasper Plastics/Tool Pro, to B. Jordan, EPA:ESD. Database #: 86. August 16, 1993. Response to Section 114 screening information request for the Jasper, IN, facility. V. Vicari, Jefferson Fiberglass Company Inc., to B. Jordan, EPA:ESD. Database #: 438. September 20, 1993. Response to Section 114 screening information request for the Harvey, LA, facility. J. Allen, Jeffrey W. Allen Inc., to B. Jordan EPA:ESD. Database #: 91. August 24, 1993. Response to Section 114 screening information request for the Titusville, FL, facility. G. Spaid, Johann Haltermann Ltd., to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Houston, TX, facility is not in the reinforced plastics source category.
II-D-343
II-D-344
II-D-345
II-D-346
II-D-347
II-D-348
II-D-349
II-D-350
II-D-351
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-352
Description A. Ziems, Johnson Controls, Inc., to B. Jordan, EPA:ESD. September 1, 1993. Letter stating that the Plymouth, MI, facility is not in the reinforced plastics source category. R. Sandstrom, Johnson Truck Bodies, to B. Jordan, EPA:ESD. Database #: 444. September 1, 1993. Response to Section 114 screening information request for the Ricelake, WI, facility. J. Lassandro, Jones & Hunt, Inc., to B. Jordan, EPA:ESD. Database #: 182. September 8, 1993. Response to Section 114 screening information request for the Orwigsburg, PA, facility. R. Currier, KAMA Corporation, to M. Strum EPA:OAQPS. No Date. Letter stating that the Hazelton, PA, facility is not in the reinforced plastics source category. G. Kyle, KBK Industries, Inc., to B. Jordan, EPA:ESD. Database #: 131. August 24, 1993. Response to Section 114 screening information request for the Rush Center, KS, facility. H. Slentz, Kal-Marble, Inc., to B. Jordan, EPA:ESD. Database #: 347. September 13, 1993. Response to Section 114 screening information request for the Schoolcraft, MI, facility. W. Dannhauer, Kalwall Corporation, to B. Jordan, EPA:ESD. Database #: 212. August 30, 1993. Response to Section 114 screening information request for the Bow, NH, facility. B. Nelson, Kawasaki Motors Manufacturing Corporation, to B. Jordan, EPA:ESD. Database #: 33. August 23, 1993. Response to Section 114 screening information request for the Lincoln, NE, facility. L. Sanquras, Kearney/Western Power Products, to B. Jordan, EPA:ESD. Database #: 138. August 26, 1993. Response to Section 114 screening information request for the Hood River, OR, facility. P. Margherio, Kemlite Co., Inc., to B. Jordan, EPA:ESD. Database #: 618. January 25, 1993. Response to Section 114 screening information request for the Channahon, IL, facility.
II-D-353
II-D-354
II-D-355
II-D-356
II-D-357
II-D-358
II-D-359
II-D-360
II-D-361
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-362
Description E. Wittstock, Kenro Inc., to B. Jordan, EPA:ESD. Database #: 343. September 9, 1993. Response to Section 114 screening information request for the Fredonia, WI, facility. R. Kerris, Kerrico Corporation, to B. Jordan, EPA:ESD. Database #: 371. September 15, 1993. Response to Section 114 screening information request for the Selinsgrove, PA, facility. J. Weeks, Kivett's Inc., to B. Jordan, EPA:ESD. Database #: 71. August 20, 1993. Response to Section 114 screening information request for the Clinton, NC, facility. D. Lundy, Kohler Company, to B. Jordan, EPA:ESD. Database #: 237. August 31, 1993. Response to Section 114 screening information request for the Brownwood, TX, facility. A. Koller, Koller Craft Plastic Products, to B. Jordan EPA:ESD. August 4, 1993. Fenton, MO, facility stating that this facility does not produce reinforced plastics. R. Tucker, Kreider Manufacturing Inc., to B. Jordan, EPA:ESD. Database #: 174. September 8, 1993. Response to Section 114 screening information request for the Ligonier, IN, facility. K. Conant, Krueger International Inc., to B. Jordan, EPA:ESD. Database #: 144. August 26, 1993. Response to Section 114 screening information request for the Green Bay, WI, facility. J. Reinhold, L. W. Reinhold Plastics, Inc., to B. Jordan, EPA:ESD., July 30, 1993. Letter stating that the Los Angeles, CA, facility is not in the reinforced plastics source category. H. Davis, L.B. Plastics, Inc., to M. Strum, EPA:OAQPS. August 6, 1993. Letter stating that the Mooresville, NC, facility is not in the reinforced plastics source category. D. Holder, LL Cultured Marble, to B. Jordan, EPA:ESD. Database #: 426. September 22, 1993. Response to Section 114 screening information request for the Mt. Airy, NY, facility.
II-D-363
II-D-364
II-D-365
II-D-366
II-D-367
II-D-368
II-D-369
II-D-370
II-D-371
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-372
Description P. Brown, LaValley Construction Company-West to B. Jordan, EPA:ESD. Database #: 470. October 6, 1993. Response to Section 114 screening information request for the Biloxi, MS, facility. P. Brown, LaValley Construction Company-West to B. Jordan, EPA:ESD. Database #: 408. No Date. Response to Section 114 screening information request. T. Lamancusa, Lacks Industries, Inc. to B. Jordan, EPA:ESD. August 4, 1993. Letter stating that the Grand Rapids, MI, facility is not in the reinforced plastics source category. T. Lamancusa, Lacks Industries Inc., to B. Jordan, EPA:ESD. August 4, 1993. Letter stating that the Kentwood, MI, facility is not in the reinforced plastics source category. J. Menges, Laminated Products Inc., to B. Jordan, EPA:ESD. Database #: 45. August 10, 1993. Response to Section 114 screening information request for the Kenosha, WI, facility. C. Johnson, LASCO Panel Products, to B. Jordan, EPA:ESD. Database #: 366. September 14, 1993. Response to Section 114 screening information request for the Florence, KY, facility. B. Isidro, LASCO Products Group, to B. Jordan, EPA:ESD. Database #: 315-321. September 7, 1993. Response to Section 114 screening information request for the Anaheim, CA, Yelm, WA, Lancaster, TX, Elizabethtown, PA, South Boston, VA, Three Rivers, MI, and Cordele, GA, facilities. C. Wittman, Lawrence Wittman & Company, Inc., to B. Jordan, EPA:ESD. Database #: 514. October 21, 1993. Response to Section 114 screening information request for the Copiague, NY, facility. P. Young, Leer East, Inc., to Jordan, EPA:ESD. Database #: 482. October 15, 1993. Response to Section 114 screening information request for the Milton, PA, facility.
II-D-373
II-D-374
II-D-375
II-D-376
II-D-377
II-D-378
II-D-379
II-D-380
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-381
Description K. Parks, Leer Midwest, to B. Jordan, EPA:ESD. Database #: 247. August 24, 1993. Response to Section 114 screening information request for the Elkhart, IN, facility. D. Cronin, Lehigh Cultured Marble Inc., to B. Jordan, EPA:ESD. Database #: 217. August 30, 1993. Response to Section 114 screening information request for the Macurgie, PA, facility. J. Mueller, Leslie Marble Products Inc., to B. Jordan, EPA:ESD. Database #: 186. September 10, 1993. Response to Section 114 screening information request for the Thorp, WI, facility. R. Hill, Lexmark International, to B. Jordan, EPA:ESD. August 19, 1993. Letter stating that the Lexington, KY, facility is not in the reinforced plastics source category. M. Downey, Liberty Industries Inc., to B. Jordan, EPA:ESD. Database #: 286. August 31, 1993. Response to Section 114 screening information request for the Ozark, MO, facility. D. Ramseur, Liberty Polyglas, Inc., to B. Jordan, EPA:ESD. Database #: 297. August 31, 1993. Response to Section 114 screening information request for the West Mifflin, PA, facility. J. Balazs, Lincoln Electric Company, to B. Jordan, EPA:ESD. Database #: 441. September 20, 1993. Response to Section 114 screening information request for the Cleveland, OH, facility. W. Vierkandt, Lippert Corp., to B. Jordan, EPA:ESD. Database #: 619. January 25, 1994. Response to Section 114 screening information request for the Menomonee Falls, WI, facility. B. Morganstern, Livingston, Inc., to B. Jordan, EPA:ESD. Database #: 113. August 24, 1993. Response to Section 114 screening information request for the Auburn, WA, facility. C. Loomis, Loomis Plastics Corporation, to B. Jordan, EPA:ESD. August 15, 1993. Letter stating that the Seattle, WA, facility is not in the reinforced plastics source category.
II-D-382
II-D-383
II-D-384
II-D-385
II-D-386
II-D-387
II-D-388
II-D-389
II-D-390
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-391
Description D. Green, Lord Corporation, to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Erie, PA, facility is not in the reinforced plastics source category. S. Marion, Lund Industries, Inc., to B. Jordan, EPA:ESD. Database #: 225. August 15, 1993. Response to Section 114 screening information request for the Coon Rapids, MN, facility. B. Stanford, M. C. Gill Corporation, to B. Jordan, EPA:ESD. Database #: 178. September 8, 1993. Response to Section 114 screening information request for the El Monte, CA, facility. W. Holtzclaw, MFG Justin Tanks, Inc., to B. Jordan, EPA:ESD. Database #: 282. August 31, 1993. Response to Section 114 screening information request for the Georgetown, DE, facility. R. McJorman, Mac Molding Company Inc., to B. Jordan, EPA:ESD. Database #: 19. August 16, 1993. Response to Section 114 screening information request for the St. Louis, MO, facility. T. Cremeans, Magnetek, to B. Jordan, EPA:ESD. Database #: 129. August 26, 1993. Response to Section 114 screening information request for the Columbus, OH, facility. E. Fillinger, Magnetek National Electric, to B. Jordan, EPA:ESD. August 19, 1993. Letter stating that the Brownsville, TX, facility is not in the reinforced plastics source category. R. Georgio, Magnum Plastics Inc., to B. Jordan, EPA:ESD. Database #: 226. August 30, 1993. Response to Section 114 screening information request for the Aurora, OH, facility. B. Haines, Main Street Lighting Standards, to B. Jordan, EPA:ESD. Database #: 294. August 31, 1993. Response to Section 114 screening information request for the Medina, OH, facility. G. Goldman, Major's Plastics, to B. Jordan, EPA:ESD. Database #: 166. September 8, 1993. Response to Section 114 screening information request for the Omaha, NE, facility.
II-D-392
II-D-393
II-D-394
II-D-395
II-D-396
II-D-397
II-D-398
II-D-399
II-D-400
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-401
Description B. Willson, Marbelite Corporation, to B. Jordan, EPA:ESD. Database #: 222. August 26, 1993. Response to Section 114 screening information request for the Novi, MI, facility. M. Poulson, Marble Designs Inc., to B. Jordan, EPA:ESD. Database #: 38. August 8, 1993. Response to Section 114 screening information request for the Central Point, OR, facility. J. Sill, Marble Products, to B. Jordan, EPA:ESD. Database #: 221. August 30, 1993. Response to Section 114 screening information request for the Wichita, KS, facility. C. Dolne, Marble Products-Lusterock Inc., to B. Jordan, EPA:ESD. September 7, 1993. Letter stating that all of the company's assets were sold to MPL Corporation. J. Maxwell, Marble Quarry Inc., to B. Jordan, EPA:ESD. Database #: 199. September 9, 1993. Response to Section 114 screening information request for the Mandeville, LA, facility. B. Gutridge, Marble Shop Inc., to B. Jordan, EPA:ESD. Database #: 32. August 23, 1993. Response to Section 114 screening information request for the Pittsburg, CA, facility. D. Lord, Marble Works Inc., to B. Jordan, EPA:ESD. Database #: 448. September 1, 1993. Response to Section 114 screening information request for the Greenwood, DE, facility. S. Chalberg, Marblecast Products Inc., to B. Jordan, EPA:ESD. Database #: 483. October 15, 1993. Response to Section 114 screening information request for the Wheeling, IL, facility. C. Rethemeyer, Marley Cooling Tower Company, to B. Jordan, EPA:ESD. Database #: 373. September 21, 1993. Response to Section 114 screening information request for the Olathe, KS, facility. R. Barnes, Marquis Corporation, to B. Jordan, EPA:ESD. Database #: 118. August 30, 1993. Response to Section 114 screening information request for the Independence, OR, facility.
II-D-402
II-D-403
II-D-404
II-D-405
II-D-406
II-D-407
II-D-408
II-D-409
II-D-410
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-411
Description B. Fennessey, Marson Corporation, to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that the Chelsea, MA, facility is not in the reinforced plastics source category. W. Lockley, Master Builders Inc., to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the Berea, OH, facility has been sold to Ceilcote, Air Cure Technologies. M. Belcher, Matsushita Floor Care Company, to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that the Danville, KY, facility is not in the reinforced plastics source category. K. Katz, McClarin Plastics Inc., to B. Jordan, EPA:ESD. Database #: 160. August 25, 1993. Response to Section 114 screening information request for the Hanover, PA, facility. D. McClure, McClure Industries Inc., to B. Jordan, EPA:ESD. Database #: 218. August 30, 1993. Response to Section 114 screening information request for the Portland, OR, facility. R. Colby, Melcher Manufacturing Company Inc., to B. Jordan, EPA:ESD. Database #: 364. September 14, 1993. Response to Section 114 screening information request for the Spokane, WA, facility. J. Cech, Menasha Corporation, to B. Jordan, EPA:ESD. Database #: 255. August 30, 1993. Response to Section 114 screening information request for the Watertown, WI, facility. D. Pilgrim, Menasha Corporation, to B. Jordan, EPA:ESD. Database #: 270. August 31, 1993. Response to Section 114 screening information request for the Manchester, IA, facility. R. Yoho, Mesa Fiberglass, Inc., to B. Jordan, EPA:ESD. Database #: 242. August 23, 1993. Response to Section 114 screening information request for the Commerce City, CO, facility. A. Hensen, Mesa Fully Formed Inc., to B. Jordan, EPA:ESD. Database #: 248. August 30, 1993. Response to Section 114 screening information request for the Mesa, AZ, facility.
II-D-412
II-D-413
II-D-414
II-D-415
II-D-416
II-D-417
II-D-418
II-D-419
II-D-420
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-421
Description M. Mentor, Michiana Fiberglass Inc., to B. Jordan, EPA:ESD. Database #: 54. August 20, 1993. Response to Section 114 screening information request for the White Pigeon, MI, facility. R. Coleman, Micro-fab Inc., to B. Jordan, EPA:ESD. Database #: 493. October 6, 1993. Response to Section 114 screening information request for the Theodore, AL, facility. L. Mathis, Mid-America Engineering, to B. Jordan, EPA:ESD. August 30, 1993. Letter stating that this company has ceased its operation. D. Frericks, Midwest Patterns, Inc., to B. Jordan, EPA:ESD. Letter stating that the Quincy, IL, facility is not in the reinforced plastics source category. L. Miles, Miles Fiberglass & Plastics, to B. Jordan, EPA:ESD. Database #: 89. August 24, 1993. Response to Section 114 screening information request for the Oregon City, OR, facility. E. Miller, Millennium Products, Inc., to B. Jordan, EPA:ESD. Database #: 28. August 23, 1993. Response to Section 114 screening information request for the Elkhart, IN, facility. H. Peterson, Milwaukee Electric Tool Corporation, to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the Jackson, MS, facility is not in the reinforced plastics source category. D. Mincey, Mincey Marble Manufacturing Inc., to B. Jordan, EPA:ESD. Database #: 495. October 6, 1993. Response to Section 114 screening information request for the Gainsville, GA, facility. T. Branson, Miracle Recreation Company, to B. Jordan, EPA:ESD. Database #: 190. September 10, 1993. Response to Section 114 screening information request for the Monett, MO, facility. Z. Davis, Miss Martha Originals, to B. Jordan, EPA:ESD. Database #: 65. August 20, 1993. Response to Section 114 screening information request for the Gadsden, AL, facility. T. Sathue, Mobil Chemical Company, to M. Strum, EPA:OAQPS. September 22, 1993. Response to Section 114 screening information request for the Princeton, NJ, facility.
II-D-422
II-D-423 II-D-424
II-D-425
II-D-426
II-D-427
II-D-428
II-D-429
II-D-430
II-D-431
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-432
Description T. Davis, Mobil Chemical Company, to B. Jordan, EPA:ESD. September 3, 1993. Letter stating that the Edison Research Laboratory is not in the reinforced plastics category. E. Romerosa, Model and Instrument Development Corporation, to B. Jordan, EPA:ESD. Database #: 211. August 25, 1993. Letter stating that the Seattle, WA, facility is not in the reinforced plastics source category. S. Long, Modern Plastics Corporation, to B. Jordan, EPA:ESD. Database #: 293. August 31, 1993. Response to Section 114 screening information request for the Benton Harbor, MI, facility. D. Renz, Molded Fiber Glass Company, to B. Jordan, EPA:ESD. Database #: 410. September 28, 1993. Response to Section 114 screening information request for the Ashtabula, OH, facility. R. Hilliard, Molded Plastic Industries, Inc., to B. Jordan, EPA:ESD. Database #: 402. September 24, 1993. Response to Section 114 screening information request for the Holt, MI, facility. G. Hughes, Molding International & Engineering, to B. Jordan, EPA:ESD. August 31, 1993. Letter stating that the Temecula, CA, facility is not in the reinforced plastics source category. R. Ingle, Moldtek, Inc., to B. Jordan, EPA:ESD. August 20, 1993. Letter stating that the Rome, GA, facility is not in the reinforced plastics source category. L. Caskey, Monarch Plastic Inc., to B. Jordan, EPA:ESD. Database #: 345. September 14, 1993. Response to Section 114 screening information request for the Orrville, OH, facility. E. Jamro, Monsanto Company, to B. Jordan, EPA:ESD. August 5, 1993. Letter stating that the Springfield, MA, facility is not in the reinforced plastics source category. J. Sumerak, Morrison Molded Fiber Glass Company, to B. Jordan, EPA:ESD. Database #: 34. August 23, 1993. Response to Section 114 screening information request for the Twinsburg, OH, facility.
II-D-433
II-D-434
II-D-435
II-D-436
II-D-437
II-D-438
II-D-439
II-D-440
II-D-441
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-442
Description T. Westbrook, Mr. Tubs Inc., to B. Jordan, EPA:ESD. Database #: 313. September 7, 1993. Response to Section 114 screening information request for the Sugar Hill, GA, facility. R. Pitlock, Munekata America Inc., to B. Jordan, EPA:ESD. August 23, 1993. Letter stating that the Dalton, GA, facility is not in the reinforced plastics source category. G. Pollic, Murphy Manufacturing Company, to B. Jordan, EPA:ESD. Database #: 14. August 18, 1993. Response to Section 114 screening information request for the Wilson, NC, facility. K. Salach, National Fiber Glass Products, to B. Jordan, EPA:ESD. Database #: 97. August 25, 1993. Response to Section 114 screening information request for the Romeoville, IL, facility. J. Lifer, National Plastics Corporation, to B. Jordan, EPA:ESD. Database #: 62. August 20, 1993. Response to Section 114 screening information request for the Port Gibson, MS, facility. M. Culpepper, Navistar International, to B. Jordan, EPA:ESD. Database #: 484. October 15, 1993. Response to Section 114 screening information request for the Columbus, OH, facility. J. Dedic, Nero Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 139. August 26, 1993. Response to Section 114 screening information request for the Owosso, MI, facility. B. Gabbard, Neutraman Inc., to B. Jordan, EPA:ESD. Database #: 111. August 17, 1993. Response to Section 114 screening information request for the Ft. Wayne, IN, facility. R. April, New England Plastic Coated, to B. Jordan, EPA:ESD. Database #: 207. August 30, 1993. Response to Section 114 screening information request for the Norton, MA, facility. R. Kearin, New England Plastics Corporation, to B. Jordan, EPA:ESD. August 20, 1993. Letter stating that the Woburn, MA, facility is not in the reinforced plastics source category.
II-D-443
II-D-444
II-D-445
II-D-446
II-D-447
II-D-448
II-D-449
II-D-450
II-D-451
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-452
Description D. Victor, Newartesian Management Company, to B. Jordan, EPA:ESD. Database #: 167. September 1, 1993. Response to Section 114 screening information request for the Covington, TN, facility. M. Campbell, Newartesian Management Company, to B. Jordan, EPA:ESD. Database #: 267. August 30, 1993. Response to Section 114 screening information request for the Mansfield, OH, facility. B. Bollman, Newport Laminates, to B. Jordan, EPA:ESD. Database #: 443. September 1, 1993. Response to Section 114 screening information request for the Santa Ana, CA, facility. S. Gale, Niagara Fiberglass Inc., to B. Jordan, EPA:ESD. Database #: 107. August 26, 1993. Response to Section 114 screening information request for the Buffalo, NY, facility. G. Ewing, Nissan Motor Manufacturing Corporation, to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the Smyrna, TN, facility is not in the reinforced plastics source category. J. Webster, Non Metallic Resources, to B. Jordan, EPA:ESD. Database #: 24. August 23, 1993. Response to Section 114 screening information request for the Mobile, AL, facility. W. Spidahl, Nordic Fiberglass Inc., to B Jordan, EPA:ESD. Database #: 409. September 27, 1993. Response to Section 114 screening information request for the Devils Lake, ND, facility. W. Voshell, Norlite Corporation, to B. Jordan, EPA:ESD. Augest 11, 1993. Letter stating that the Cohoes, NY, facility is not in the reinforced plastics source category. S. Abbott, North American Lighting, Inc., to B. Jordan, EPA:ESD. Database #: 58. September 8, 1993. Response to Section 114 screening information request for the Flora, IL, facility. J. Gordon, North Brothers Company, to M. Strum EPA:OAQPS. July 29, 1993. Letter stating that the Atlanta, GA, facility is not in the reinforced plastics source category.
II-D-453
II-D-454
II-D-455
II-D-456
II-D-457
II-D-458
II-D-459
II-D-460
II-D-461
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-462
Description N. Miller, Northwest Bodies Inc., to B. Jordan, EPA:ESD. Database #: 191. September 10, 1993. Response to Section 114 screening information request for the Manson, IA, facility. M. Wannberg, Northwest Urethane, to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the company is no longer in business. G. Brandt, Norton Performance Plastics Corporation, to M. Strum, EPA:OAQPS. Database #: 476. October 5, 1993. Response to Section 114 screening information request for the Ravenna, OH, facility. G. Metcalf, Nova Enterprises, Inc., to B. Jordan, EPA:ESD. Database #: 193. September 10, 1993. Response to Section 114 screening information request for the Asheville, NC, facility. C. Weir, Nova Group, Inc., to B. Jordan, EPA:ESD. Database #: 431. September 22, 1993. Response to Section 114 screening information request for the Napa, CA, facility. W. Fanlow, O.A. Newton & Son Company, to B. Jordan, EPA:ESD. August 27, 1993. Letter stating that the Bridgeville, DE, facility is not in the reinforced plastics source catagory. L. Ricca, O/C Tanks Corporation, to B. Jordan, EPA:ESD. Database #: 235. August 31, 1993. Response to Section 114 screening information request for the Valparaiso, IN, facility. J. Senn, Oasis, to B. Jordan, EPA:ESD. Database #: 601. No date. Response to Section 114 screening information request for the Waterloo, IA, facility. D. Graham, Oasis Industries Inc., to B. Jordan, EPA:ESD. Database #: 78. August 27, 1993. Response to Section 114 screening information request for the Batavia, IL, facility. W. Odom, Odom Fiberglass Inc., to B. Jordan, EPA:ESD. Database #: 3. August 10,1993. Response to Section 114 screening information request for the Milton, FL, facility.
II-D-463 II-D-464
II-D-465
II-D-466
II-D-467
II-D-468
II-D-469
II-D-470
II-D-471
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-472
Description R. Gardner, Olympic Fiberglass Industries, to B. Jordan, EPA:ESD. Database #: 475. October 15, 1993. Response to Section 114 screening information request for the Rochester, IN, facility. W. McSherry, Omega Pultrusions Division, to B. Jordan, EPA:ESD. Database #: 140. August 26, 1993. Response to Section 114 screening information request for the Aurora, OH, facility. J. Weber, Omega Tool, Inc., to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the Menomonee Falls, WI, facility is not in the reinforced plastics source category. R. Thibault, Osborne Industries Inc., to B. Jordan, EPA:ESD. Database #: 305. September 3, 1993. Response to Section 114 screening information request for the Osborne, KS, facility. W. Gillies, Owens-Corning, to B. Jordan, EPA:ESD. Database #: 452. No Date. Response to Section 114 screening information request for the Mount Union, PA, facility. J. Lewis, Owens-Corning Fiberglass, to B. Jordan, EPA:ESD. Database #: 461. August 31, 1993. Response to Section 114 screening information request for the Bakersfield, CA, facility. S. Flowers, Owens-Corning Fiberglass, to B. Jordan, EPA:ESD. Database #: 290. August 31, 1993. Response to Section 114 screening information request for the Hazelton, PA, facility. M. Blackmar, Owens-Corning Fiberglass Corporation, to B. Jordan, EPA:ESD. Database #: 2. August 10, 1993. Response to Section 114 screening information request for the Conroe, TX, facility. C. Findley, Owens-Corning Fiberglass Corporation, to B. Jordan, EPA:ESD. Database #: 249. August 30, 1993. Response to Section 114 screening information request for the Auburndale, IL, facility. T. Eber, Oxford CMP Inc., to B. Jordan, EPA:ESD. Database #: 116. August 30, 1993. Response to Section 114 screening information request for the Oxford, MS, facility.
II-D-473
II-D-474
II-D-475
II-D-476
II-D-477
II-D-478
II-D-479
II-D-480
II-D-481
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-482
Description W. Poiesz, Pac-Tec Corporation, to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the Philadelphia, PA, facility is not in the reinforced plastics source category. P. Smith, Pacific Allied Products, to B. Jordan, EPA:ESD. August 16, 1993. Letter stating that the Ewa Beach, HI, facility is not in the reinforced plastics source category. S. Harkness, Pacific Plastics & Engineering, to B. Jordan, EPA:ESD. August 27, 1993. Letter stating that the Soquel, CA, facility is not in the reinforced plastics source category. N. Farestveit, Pacific Tank Ltd., to B. Jordan, EPA:ESD. Database #: 5. August 10, 1993. Response to Section 114 screening information request for the Adelanto, CA, facility. G. LeBatard, Parkson Aeration & Fiberglass, to B. Jordan, EPA:ESD. Database #: 496. October 6, 1993. Response to Section 114 screening information request for the Medley, FL, facility. N. Giannopoulos, Parthenon Marble Products Inc., to B. Jordan, EPA:ESD. Database #: 360. September 9, 1993. Response to Section 114 screening information request for the Greenville, SC, facility. J. Wright, Peabody TecTank, Inc., to B. Jordan, EPA:ESD. July 29, 1993. Letter stating that the Parsons, KS, facility is not in the reinforced plastics source category. P. Shepard, Pearl Baths, Inc., to B. Jordan, EPA:ESD. Database #: 224. August 26, 1993. Response to Section 114 screening information request for the Brooklyn Park, MN, facility. S. Skutch, Peerless Molded Plastics, Inc., to B. Jordan, EPA:ESD. July 30, 1993. Letter stating that the Toledo, OH, facility is not in the reinforced plastics source category. J. Hoven, Pelican Products, Inc., to B. Jordan, EPA:ESD. August 10, 1993. Response to Section 114 screening information request for the Torrence, CA, facility stating that no reinforced plastics are produced at this facility.
II-D-483
II-D-484
II-D-485
II-D-486
II-D-487
II-D-488
II-D-489
II-D-490
II-D-491
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-492
Description S. Jones, Perma Grain Products, Inc., to B. Jordan, EPA:ESD. Database #: 184. September 10, 1993. Response to Section 114 screening information request for the Lenoir City, TN, facility. K. Anderson, Peterson Products, to B. Jordan, EPA:ESD. Database #: 357. September 14, 1993. Response to Section 114 screening information request for the Belmont, CA, facility. F. Ranson, Phil Carter System, to B. Jordan, EPA:ESD. Database #: 43. August 12, 1993. Response to Section 114 screening information request for the Newport News, VA, facility. R. Walsh, Phillips 66 Company, to M. Strum, EPA:OAQPS. October 20, 1993. Letter stating that the Houston Chemical Complex is not in the reinforced plastics source category. C. O'Regan, Phillips Manufacturing Company, to M. Strum, EPA:OAQPS. August 26, 1993. Letter stating that the Canton, MA, facility is not in the reinforced plastics source category. T. Hebert, Picken's Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 311. September 7, 1993. Response to Section 114 screening information request for the Ashtabula, OH, facility. T. Hersberger, Piedmont Composites, to M. Strum, EPA:OAQPS. Database #: 607. No date. Response to Section 114 screening information request for the Conover, NC, facility. D. Brooks, Piedmont Fiberglass, to B. Jordan, EPA:ESD. Database #: 277. August 31, 1993. Response to Section 114 screening information request for the Mooresville, NC, facility. E. Pilling, Pilling's F.R.P., to B. Jordan, EPA:ESD. Database #: 515. October 25, 1993. Response to Section 114 screening information request for the Shamokin, PA, facility. J. Pinta, Pinta's Cultured Marble Inc., to B. Jordan, EPA:ESD. Database #: 301. September 3, 1993. Response to Section 114 screening information request for the Worth, IL, facility.
II-D-493
II-D-494
II-D-495
II-D-496
II-D-497
II-D-498
II-D-499
II-D-500
II-D-501
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-502
Description R. Hall, Pioneer Plastics Corporation, to B. Jordan, EPA:ESD. August 4, 1993. Letter stating that the Auburn, ME, facility is not in the reinforced plastics source category. C. Rowe, Plas-Tech, Ltd., to B. Jordan, EPA:ESD. Database #: 453. August 31, 1993. Response to Section 114 screening information request for the Honolulu, HI, facility. K. Parks, Plas/Steel Products, to B. Jordan, EPA:ESD. Database #: 246. August 24, 1993. Response to Section 114 screening information request for the Walkerton, IN, facility. J. Rowan, Plasti-Fab Inc., to B. Jordan, EPA:ESD. Database #: 179. September 8, 1993. Response to Section 114 screening information request for the Tualatin, OR, facility. C. Keoun, Plastic Composites Corporation, to B. Jordan, EPA:ESD. Database #: 291. August 25, 1993. Response to Section 114 screening information request for the Fort Wayne, IN, facility. S. Allison, Plastic Development Company, to B. Jordan, EPA:ESD. Database #: 96. August 25, 1993. Response to Section 114 screening information request for the Williamsport, PA, facility. R. Breitenstein, Plastics Development, Inc., to B. Jordan, EPA:ESD. August 12, 1993. Letter stating that the Milwaukie, OR, facility is not in the reinforced plastics source category. M. Furse, Plastofilm Industries, Inc., to B. Jordan, EPA:ESD. August 10, 1993. Letter stating that Plastofilm Industries is not in the reinforced plastics source category. T. Roberts, Plymouth Foam Products, to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the Plymouth, WI, facility is not in the reinforced plastics source category. F. Scott, Pollyfoam Corporation, to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the Northbridge, MA, facility is not in the reinforced plastics source category.
II-D-503
II-D-504
II-D-505
II-D-506
II-D-507
II-D-508
II-D-509
II-D-510
II-D-511
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-512
Description K. Johnson, Poly Foam, Inc., to B. Jordan, EPA:ESD. July 29, 1993. Letter stating that the Lester Prairie, MN, facility is not in the reinforced plastics soure category. T. Meyer, Polydyne Inc., to B. Jordan, EPA:ESD. August 27, 1993. Letter stating that the Waukesha, WI, facility is not in the reinforced plastics source category. W. Hill, Polymer Casting Inc., to B. Jordan, EPA:ESD. Database #: 295. August 31, 1993. Response to Section 114 screening information request for the Ft. Myers, FL, facility. R. Ostrowski, Polymer Composites, Inc., to B. Jordan, EPA:ESD. Database #: 80. August 27, 1993. Response to Section 114 screening information request for the Winona, MN, facility. S. Kanter, Polymer Concrete Corporation, to B. Jordan, EPA:ESD. Database #: 52. August 17, 1993. Response to Section 114 screening information request for the Detroit, MI, facility. D. Hurley, Polymerix, Inc., to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the Cranford, NJ, facility is not in the reinforced plastics source category. J. Reber, Polyply, Inc., to B. Jordan, EPA:ESD. Database #: 68. August 17, 1993. Response to Section 114 screening information request for the Grand Haven, MI, facility. J. Schliesman, Portage Casting & Mold, Inc., to B. Jordan, EPA:ESD. August 25, 1993. Letter stating that the Portage, WI, facility is not in the reinforced plastics source category. M. Fideler, Premier Industries, Inc., to M. Strum, EPA:OAQPS. August 3, 1993. Letter stating that the Tacoma, WA, facility is not in the reinforced plastics source category. G. Korbelik, Premier Pneumatics, Inc., to B. Jordan, EPA:ESD. No date. Letter stating that the Salina, KS, facility is not in the reinforced plastics source category.
II-D-513
II-D-514
II-D-515
II-D-516
II-D-517
II-D-518
II-D-519
II-D-520
II-D-521
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-522
Description B. Green, Premix, Inc., to B. Jordan, EPA:ESD. Database #: 181. September 8, 1993. Response to Section 114 screening information request for the Hartford City, IN, facility. M. Hart, Prestigious Accessories Inc., to B. Jordan, EPA:ESD. Database #: 10. August 13, 1993. Response to Section 114 screening information request for the Tyler, TX, facility. S. Hartsough, Price Brothers Composites, to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the Green Cove Springs, FL, facility is no longer in operation. N. Mercier, Primero Inc., to B. Jordan, EPA:ESD. Database #: 287. August 31, 1993. Response to Section 114 screening information request for the Nashua, NH, facility. B. Care, Prince Rubber & Plastics Company, to B. Jordan, EPA:ESD. August 4, 1993. Letter stating that the Buffalo, NY, facility is not in the reinforced plastics source category. L. Romano, Process Control Corporation, to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Atlanta, GA, facility is not in the reinforced plastics source category. K. Huang/J. Parkhurst, Prodelin Corporation, to B. Jordan, EPA:ESD. Database #: 437. September 20, 1993. Response to Section 114 screening information request for the Catawba, NC, facility. D. Blackburn, Progress Plastics, Inc., to B. Jordan, EPA:ESD. Database #: 73. August 20, 1993. Response to Section 114 screening information request for the Auburndale, FL, facility. P. Marley, Prototype Concepts Inc., to B. Jordan, EPA:ESD. Database #: 136. August 24, 1993. Response to Section 114 screening information request for the Fountain Valley, CA, facility. G. Osko, Prototype Plastics Inc., to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Orange, CA, facility has ceased manufacturing operations.
II-D-523
II-D-524
II-D-525
II-D-526
II-D-527
II-D-528
II-D-529
II-D-530
II-D-531
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-532
Description M. Treadway, Puget Corporation, to M. Strum, EPA:OAQPS. August 4, 1993. Letter stating that the Portland, OR, facility is not in the reinforced plastics source category. K. Dean, Quadrax Corporation, to M. Strum, EPA:OAQPS. September 3, 1993. Letter stating that the Portsmouth, RI, facility is not in the reinforced plastics source category. A. Whitaker, Quazite Company, to B. Jordan, EPA:ESD. Database #: 230. August 30, 1993. Response to Section 114 screening information request for the San Jose, CA, facility. T. Downie, R & D Marble Inc., to B. Jordan, EPA:ESD. Database #: 469. August 24, 1993. Response to Section 114 screening information request for the Willis, TX, facility. M. Ellenwood, R & R Plastics, Inc., to B. Jordan, EPA:ESD. September 9, 1993. Letter stating that the Swanton, OH, facility is not in the reinforced plastics source category. R. Jenson, R.A. Jenson Manufacturing Company, to B. Jordan, EPA:ESD. Database #: 464. September 1, 1993. Response to Section 114 screening information request for the San Francisco, CA, facility. R. DeGraff, R.D. Werner Company, Inc., to B. Jordan, EPA:ESD. Database #: 233. August 25, 1993. Response to Section 114 screening information request for the Franklin Park, IL, facility. L. Brandt, Radiant Marble, to B. Jordan, EPA:ESD. Database #: 130. August 24, 1993. Response to Section 114 screening information request for the Deerfield Beach, FL, facility. F. Cotten, Rakar, Inc., to B. Jordan, EPA:ESD. Database #: 439. September 20, 1993. Response to Section 114 screening information request for the Oxnard, CA, facility. J. Shafer, Ranch Fiberglas, Inc., to B. Jordan, EPA:ESD. Database #: 46. August 10, 1993. Response to Section 114 screening information request for the Elkhart, IN, facility.
II-D-533
II-D-534
II-D-535
II-D-536
II-D-537
II-D-538
II-D-539
II-D-540
II-D-541
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-542
Description K. Doeden, Raven Industries, Inc., to B. Jordan, EPA:ESD. Database #: 611 & 612. November 15, 1993. Responses to Section 114 screening information requests for the Sioux Falls, SD, and Washington Courthouse, OH, facilities. D. Leal, Red Ewald, Inc., to B. Jordan, EPA:ESD. Database #: 22. August 23, 1993. Response to Section 114 screening information request for the Karnes City, TX, facility. P. Black, Regal Cultured Marble Inc., to B. Jordan, EPA:ESD. Database #: 436. September 20, 1993. Response to Section 114 screening information request for the LaHabra, CA, facility. A. Bashor, Regal Plastic Company, to B. Jordan, EPA:ESD. August 30, 1993. Letter stating that the Kansas City, MO, facility is not in the reinforced plastics source category. T. Reiss, Reiss Industries, Inc., to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the Watertown, WI, facility is not in the reinforced plastics source category. K. Stiltz, Resinoid Engineering Corporation, to B. Jordan, EPA:ESD. Database #: 506. September 28, 1993. Response to Section 114 screening information request for the Skokie, IL, facility. G. Begg/D. Kniess, Resolite, to B. Jordan, EPA:ESD. Database #: 414. September 27, 1993. Response to Section 114 screening information request for the Zelienople, PA, facility. B. Retterbush, Retterbush Injection Molded Fiberglass Corporation, to B. Jordan, EPA:ESD. Database #: 95. August 26, 1993. Response to Section 114 screening information request for the Piquo, OH, facility. B. Bunker, Richmond Plastics, Inc., to B. Jordan, EPA:ESD. September 30, 1993. Letter stating that the Chester, VA, facility is not in the reinforced plastics source category. W. Welborn, Rival Manufacturing Company, to M. Strum, EPA:OAQPS. August 18, 1993. Letter stating that the Clinton, MO, facility is not in the reinforced plastics source category.
II-D-543
II-D-544
II-D-545
II-D-546
II-D-547
II-D-548
II-D-549
II-D-550
II-D-551
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-552
Description G. Face, Robroy Industries, to B. Jordan, EPA:ESD. Database #: 183. September 8, 1993. Response to Section 114 screening information request for the Belding, MI, facility. G. Mezei, Robroy Industries, to B. Jordan, EPA:ESD. Database #: 390. September 27, 1993. Response to Section 114 screening information request for the Verona, PA, facility. R. Bradham, Rockwell International, to B. Jordan, EPA:ESD. Database #: 606. December 10, 1993. Response to Section 114 screening information request for the Centralia, IL, facility. S. Bradley, Rockwell Plastic Products, to B. Jordan, EPA:ESD. Database #: 605. December 16, 1993. Response to Section 114 screening information request for the Newton, NC, facility. J. Steigmeyer, Roma Marble, Inc., to B. Jordan, EPA:ESD. Database #: 503. October 6, 1993. Response to Section 114 screening information request for the Ludlow, MA, facility. T. Dalzell, Roman Marble Products, Inc., to B. Jordan, EPA:ESD. Database #: 616. November 1, 1993. Response to Section 114 screening information request for the Omaha, NE, facility. K. Konczak, Romeo-Rim, Inc. to B. Jordan, EPA:ESD. Database #: 134. August 24, 1993. Response to Section 114 screening information request for the Romeo, MI, facility. J. Royce, Royce Associates, to B. Jordan, EPA:ESD. August 6, 1993. Letter stating that the East Rutherford, NJ, facility is not in the reinforced plastics source category. W. Wells, Rubber & Plastic Applicators, to B. Jordan, EPA:ESD. Database #: 170. September 1, 1993. Response to Section 114 screening information request for the Mobile, AL, facility. N. DeCost, Rubbermaid Inc., to B. Jordan, EPA:ESD. August 4, 1993. Letter stating that the Wooster, OH, facility has ceased operation.
II-D-553
II-D-554
II-D-555
II-D-556
II-D-557
II-D-558
II-D-559
II-D-560
II-D-561
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-562
Description J. Manning, Rynone Manufacturing Corporation, to B. Jordan, EPA:ESD. Database #: 324. September 7, 1993. Response to Section 114 screening information request for the Sayre, PA, facility. N. Giannopoulos, Ryobi Motor Products Corporation, to B. Jordan, EPA:ESD. Database #: 365. September 10, 1993. Response to Section 114 screening information request for the Pickens, SC, facility. R. Evans, S. R. Smith, Inc., to B. Jordan, EPA:ESD. Database #: 8. August 13, 1993. Response to Section 114 screening information request for the Canby, OR, facility. W. Miller, Saturn Corporation, to B. Jordan, EPA:ESD. August 10, 1993. Letter stating that the Spring Hill, TN, facility is not in the reinforced plastics source category. S. Carlisle, Savannah Marble Company, to B. Jordan, EPA:ESD. Database #: 37. August 11, 1993. Response to Section 114 screening information request for the Savannah, GA, facility. B. Simmons, Schmitt Marble Products, to B. Jordan, EPA:ESD. Database #: 608. November 29, 1993. Response to Section 114 screening information request for the Loveland, OH, facility. G. Irwin, Schumacher Electric Corporation, to B. Jordan, EPA:ESD. Database #: 74. August 12, 1993. Response to Section 114 screening information request for the Rensselaer, IN, facility. T. Kaler, Seal Reinforced Fiberglass, to B. Jordan, EPA:ESD. Database #: 416. September 28, 1993. Response to Section 114 screening information request for the Copiague, NY, facility. J. Doherty, Sequentia, Inc., to B. Jordan, EPA:ESD. Database #: 201. August 31, 1993. Response to Section 114 screening information request for the Grand Junction, TN, and Grandview, MO, process one and two facilities. J. Price, Shakespeare Company, to B. Jordan, EPA:ESD. Database #: 372. September 21, 1993. Response to Section 114 screening information request for the Newberry, SC, facility.
II-D-563
II-D-564
II-D-565
II-D-566
II-D-567
II-D-568
II-D-569
II-D-570
II-D-571
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-572
Description S. Ratcliffe, Shenandoah Fiberglass Pro Company, to B. Jordan, EPA:ESD. Database #: 121. August 30, 1993. Response to Section 114 screening information request for the Front Royal, VA, facility. B. Wier, Sherman Utility Structures, to B. Jordan, EPA:ESD. Database #: 394. September 27, 1993. Response to Section 114 screening information request for the Estill, SC, facility. J. Shanok, Silvatrim Corporation of America, to B. Jordan, EPA:ESD. August 4, 1993. Letter stating that the South Plainfield, NJ, facility is not in the reinforced plastics source category. H. Snell, Simon-Telelect Inc., to B. Jordan, EPA:ESD. Database #: 328. No Date. Response to Section 114 screening information request for the Watertown, SD, facility. M. Terrell, Smith Fiberglass Products Inc., to B. Jordan, EPA:ESD. Database #: 82-84. August 19, 1993. Response to Section 114 screening information request for the plant one and two in Little Rock, AR, and the Wichita, KS, facility. T. Mieritz, Snider Mold Company, Inc., to B. Jordan, EPA:ESD. Database #: 112. August 24, 1993. Response stating that the Mequon, WI, facility is not in the reinforced plastics source category. H. Spurrier, Snyder Industries, Inc., to B. Jordan, EPA:ESD. August 9, 1993. Response to Section 114 screening information request for the Lincoln, NE, facility stating that this facility does not produce reinforced plastics. A. Thomas, Solar Plastics, Inc., to B. Jordan, EPA:ESD. August 19, 1993. Letter stating that the Tampa, FL, facility is not in the reinforced plastics source category. J. Dennis, Southeast Marble Inc., to B. Jordan, EPA:ESD. Database #: 35. No date. Response to Section 114 screening information request for the Kissimmee, FL, facility. W. Schneider, Southern Plastics Company, to B. Jordan, EPA:ESD. August 9, 1993. Letter stating that the West Columbia, SC, facility is not in the reinforced plastics source category.
II-D-573
II-D-574
II-D-575
II-D-576
II-D-577
II-D-578
II-D-579
II-D-580
II-D-581
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-582
Description G. Erickson, Space Tables, to B. Jordan, EPA:ESD. Database #: 462. No date. Response to Section 114 screening information request for the Minneapolis, MN, facility. R. Wells, Spaulding Composites Company, to B. Jordan, EPA:ESD. Database #: 266. August 30, 1993. Response to Section 114 screening information request for the De Kalb, IL, facility. S. Gedalje, Spears Manufacturing Company, to B. Jordan, EPA:ESD. Database #: 66. August 20, 1993. Response to Section 114 screening information request for the Jerome, ID, facility. C. Peek, Specialty Plastic, to B. Jordan, EPA:ESD. Database #: 481. No date. Response to Section 114 screening information request for the Lakeland, FL, facility. R. Lea, Specialty Plastics, to B. Jordan, EPA:ESD. Database #: 41. August 18, 1993. Response to Section 114 screening information request for the Baton Rouge, LA, facility. J. Jensen, Square D. Company, to B. Jordan, EPA:ESD. Database #: 337. September 8, 1993. Response to Section 114 screening information request for the Cedar Rapids, IA, facility. C. Christensen, Square D Company, to B. Jordan, EPA:ESD. Database #: 51. August 16, 1993. Response to Section 114 screening information request for the Lincoln, NE, facility. P. Schulter, St. Croix of Park Falls Ltd., to B. Jordan, EPA:ESD. Database #: 169. September 8, 1993. Response to Section 114 screening information request for the Park Falls, WI, facility. B. Awerkamp, St. Mary's Marble, L.L.C., to B. Jordan, EPA:ESD. Database #: 7. August 9, 1993. Response to Section 114 screening information request for the St. Mary's, KS, facility. J. Stone, Standard Glas, to B. Jordan, EPA:ESD. Database #: 435. September 10, 1993. Response to Section 114 screening information request for the Bremen, IN, facility.
II-D-583
II-D-584
II-D-585
II-D-586
II-D-587
II-D-588
II-D-589
II-D-590
II-D-591
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-592
Description R. Watkins, Stanley Electric U.S. Co., Inc., to B. Jordan, EPA:ESD. Database #: 275. August 31, 1993. Response to Section 114 screening information request for the London, OH, facility. B. Harrison, Sterling Plumbing Group, Inc. to B. Jordan, EPA:ESD. Database #: 92. August 26, 1993. Response to Section 114 screening information request for the Huntsville, AL, facility. R. Pelletier, Sterling Systems, to B. Jordan, EPA:ESD. August 10, 1993. Letter stating that the Forest, VA, facility is not in the reinforced plastics source category. R. Hall, Stihl, Inc., to B. Jordan, EPA:ESD. August 18, 1993. Letter stating that the Virginia Beach, VA, facility is not in the reinforced plastics source category. T. Boddye, Structron Corporation, to B. Jordan, EPA:ESD. Database #: 440. September 1, 1993. Response to Section 114 screening information request for the San Marcos, CA, facility. E. Morris, Structural Composites Industries, to B. Jordan, EPA:ESD. August 17, 1993. Letter stating that the Pomona, CA, facility is not in the reinforced plastics source category. K. Ziernicki, Structural Fibers, to B. Jordan, EPA:ESD. Database #: 227. August 28, 1993. Response to Section 114 screening information request for the Chardon, OH, facility. J. Bader, Style Crest Products, to B. Jordan, EPA:ESD. Database #: 143. August 26, 1993. Response to Section 114 screening information request for the Fremont, OH, facility. B. Rieck, Sunrise Fiberglass Corporation, to B. Jordan, EPA:ESD. Database #: 504. September 29, 1993. Response to Section 114 screening information request for the Wyoming, MN, facility. C. Ehn, Sunset Plastics Inc., to B. Jordan, EPA:ESD. Database #: 465. September 1, 1993. Response to Section 114 screening information request for the Anderson, CA, facility.
II-D-593
II-D-594
II-D-595
II-D-596
II-D-597
II-D-598
II-D-599
II-D-600
II-D-601
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-602
Description R. Daggett, Superior Marble, to B. Jordan, EPA:ESD. Database #: 216. August 30, 1993. Response to Section 114 screening information request for the Maryville, IL, facility. R. Hemminger, Superior Mold Company, to B. Jordan, EPA:ESD. August 12, 1993. Letter stating that the Ontario, CA, facility is not in the reinforced plastics source category. K. Hibbs, Syn-mar Cultured Marble Inc., to B. Jordan, EPA:ESD. Database #: 69. August 20, 1993. Response to Section 114 screening information request for the San Francisco, CA, facility. L. Erkhart, Synmar Inc., to B Jordan, EPA:ESD. Database #: 447. September 1, 1993. Response to Section 114 screening information request for the Jonesboro, GA, facility. M. Wright, Syntechnics, Inc., to B. Jordan, EPA:ESD. Database #: 67. August 16, 1993. Response to Section 114 screening information request for the Paducah, KY, facility. T. Battaglia, TRW-Transportation, to B. Jordan, EPA:ESD. Database #: 205. August 31, 1993. Response to Section 114 screening information request for the Union Springs, NY, facility. B. Taylor, Taylor Industries Inc., to B. Jordan, EPA:ESD. Database #: 383. August 11, 1993. Response to Section 114 screening information request for the Parkerford, PA, facility. E. Vollenweider, Technical Innovations, Inc., to B. Jordan, EPA:ESD. July 30, 1993. Letter stating that the Waterford, MI, facility is not in the reinforced plastics source category. C. Revert, Teco Inc., to B. Jordan, EPA:ESD. Database #: 49. August 16, 1993. Response to Section 114 screening information request for the Fort Wayne, IN, facility. R. Dittrich, Tex-O-Lon Manufacturing Company, to B. Jordan, EPA:ESD. Database #: 508. August 23, 1993. Response to Section 114 screening information request for the Houston, TX, facility.
II-D-603
II-D-604
II-D-605
II-D-606
II-D-607
II-D-608
II-D-609
II-D-610
II-D-611
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-612
Description M. Shaughnessy, The Colormatrix Corporation, to B. Jordan, EPA:ESD. August 18, 1993. Letter stating that the Cleveland, OH, facility is not in the reinforced plastics source category. D. Winegar, The Duriron Company, Inc. to B. Jordan, EPA:ESD. Database #: 102. August 26, 1993. Response to Section 114 screening information request for the Springboro, OH, facility. L. Smith, The General Industries Company, to B. Jordan, EPA:ESD. Database #: 15. August 13, 1993. Response to Section 114 screening information request for the Elyria, OH, facility. E. Gilman, The Gilman Brothers Company, to M. Strum, EPA:OAQPS. August 24, 1993. Letter stating that the Gilman, CT, facility is not in the reinforced plastics source category. K. O'Day, The Goodyear Tire & Rubber Company, to B. Jordan, EPA:ESD. Database #: 369. September 13, 1993. Response to Section 114 screening information request for the Jackson, OH, facility. R. Kunz, The Larson Company, to B. Jordan, EPA:ESD. Database #: 615. No date. Response to Section 114 screening information request for the Tucson, AZ, facility. B. Taylor, The New York Blower Company, to B. Jordan, EPA:ESD. Database #: 309. August 31, 1993. Response to Section 114 screening information request for the LaPorte, IN, facility. D. Gruenberg, Thermal Care/Mayer, to B. Jordan, EPA:ESD. August 5, 1993. Letter stating that the Niles, IL, facility is not in the reinforced plastics source category. D. Wopperer, Thermal Foams, Inc., to B. Jordan, EPA:ESD. August 18, 1993. Letter stating that the Buffalo, NY, facility is not in the reinforced plastics source category. B. Yutrzenka, Thermoset Plastics Inc., to B. Jordan, EPA:ESD. Database #: 44. August 10, 1993. Response to Section 114 screening information request for the Mitchell, SD, facility.
II-D-613
II-D-614
II-D-615
II-D-616
II-D-617
II-D-618
II-D-619
II-D-620
II-D-621
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-622
Description S. Martin, Thomasville Furniture Industries, to B. Jordan, EPA:ESD. August 5, 1993. Letter stating that Armstrong Furniture in Appomattox, VA, is not in the reinforced plastics source category. D. Thornton Barnett, Thornton Tile & Marble Inc., to B. Jordan, EPA:ESD. Database #: 348. September 13, 1993. Response to Section 114 screening information request for the Murray, KY, facility. A. Nabb, Tiffany Marble Manufacturing, Inc., to B. Jordan, EPA:ESD. Database #: 602. December 29, 1993. Response to Section 114 information screening request for the Fenton, MO, facility. T. Smith, Tom Smith Fiberglass Inc., to B. Jordan, EPA:ESD. Database #: 238. August 31, 1993. Response to Section 114 screening information request for the Eugene, OR, facility. M. Burggren, Toray Industries, Inc., to B. Jordan, EPA:ESD. August 20, 1993. Letter stating that the Tacoma, WA, facility will be constructed at the end of 1994. D. Hughes / L. Zable, Trail Wagons Inc., to B. Jordan, EPA:ESD. Database #: 361. September 14, 1993. Response to Section 114 screening information request for the Yakima, WA, facility. T. Higgins, Treasure Coast Marble Flow, Inc., to B. Jordan, EPA:ESD. Database #: 48. August 13, 1993. Response to Section 114 screening information request for the Stuart, FL, facility. G. Conly, Tri-City Marble Inc., to B. Jordan, EPA:ESD. Database #: 63. August 20, 1993. Response to Section 114 screening information request for the Allentown, PA, facility. B. Mitchell, Tri-Glass (VMC), to B. Jordan, EPA:ESD. Database #: 418. September 23, 1993. Response to Section 114 screening information request for the Daleville, AL, facility. J. Schlee, Triangle Plastics, Inc., to M. Strum, EPA:OAQPS. August 11, 1993. Letter stating that the Winthrop, IA, facility is not in the reinforced plastics source category.
II-D-623
II-D-624
II-D-625
II-D-626
II-D-627
II-D-628
II-D-629
II-D-630
II-D-631
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-632
Description M. Suarez, Trico Technologies Corporation, to B. Jordan, EPA:ESD. September 28, 1993. Letter stating that the Brownsville, TX, facility is not in the reinforced plastics source category. T. Schroeter, U.S. Chemical & Plastics Inc., to B. Jordan, EPA:ESD. August 24, 1993. Letter stating that the Canton, OH, facility is not in the reinforced plastics source category. T. Coomes, U.S. Fiberglass Products Inc., to B. Jordan, EPA:ESD. Database #: 292. August 31, 1993. Response to Section 114 screening information request for the Middlebranch, OH, facility. P. Mitchell, Ultra/Glas Corporation, to M. Strum, EPA:OAQPS. Database #: 507. September 14, 1993. Response to Section 114 screening information request for the Lakeville, IN, facility. K. Bourreza, United Panel Incorporated, to B. Jordan, EPA:ESD. Database #: 603. December 30, 1993. Response to Section 114 screening information request for the Mt. Bethel, PA, facility. P. Sak, United States Marble Inc., to B. Jordan, EPA:ESD. Database #: 486. September 29, 1993. Response to Section 114 screening information request for the Remus, MI, facility. D. Epes, United Technologies Motor Systems, to B. Jordan, EPA:ESD. November 1, 1993. Response to Section 114 screening information request for the Columbus, MS, facility. P. Sandberg, Universal Plastics Inc., to B. Jordan, EPA:ESD. Database #: 359. September 14, 1993. Response to Section 114 screening information request for the Maple Grove, MN, facility. R. Walczak, Universal-Rundle Corporation, to B. Jordan, EPA:ESD. Database #: 18. August 6, 1993. Response to Section 114 screening information request for the New Castle, PA, facility. D. Ellis, Universal-Rundle Corporation, to B. Jordan, EPA:ESD. Database #: 72. August 20, 1993. Response to Section 114 screening information request for the Union Point, GA, facility.
II-D-633
II-D-634
II-D-635
II-D-636
II-D-637
II-D-638
II-D-639
II-D-640
II-D-641
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-642
Description A. Newman, Universal-Rundle Corporation, to B. Jordan, EPA:ESD. Database #: 77. August 18, 1993. Response to Section 114 screening information request for the Rensselaer, IN, facility. J. Perdue/B. Polzin, Universal-Rundle Corporation, to B. Jordan, EPA:ESD. Database #: 505. September 30, 1993. Response to Section 114 screening information request for the Ottumwa, IA, facility. G. Nicholson, VIATEC-Hastings Engineered Systems, to B. Jordan, EPA:ESD. Database #: 398. September 20, 1993. Response to Section 114 screening information request for the Hastings, MI, facility. N. Andre, Van Norman Molding Company, to B. Jordan, EPA:ESD. Database #: 466. September 1, 1993. Response to Section 114 screening information request for the Bridgeview, IL, facility. V. Thupakula/F. Salembiar, Venetian Marble, to B. Jordan, EPA:ESD. Database #: 355. September 14, 1993. Response to Section 114 screening information request for the Helotes, TX, facility. L. Cash, Venetian Marble Inc., to B. Jordan, EPA:ESD. Database #: 125. August 25, 1993. Response to Section 114 screening information request for the Richmond, VA, facility. H. Klotzbach, Venetian Marble of Wisconsin, to B. Jordan, EPA:ESD. Database #: 53. August 17, 1993. Response to Section 114 screening information request for the Madison, WI, facility. R. Rivers, Venus-Gusmer, to B. Jordan, EPA:ESD. August 27, 1993. Letter stating that the Kent, WA, facility is not in the reinforced plastics source category. H. Parker, Vertex Plastics Inc., to B. Jordan, EPA:ESD. Database #: 501. August 31, 1993. Response to Section 114 screening information request for the Kearney, MO, facility. D. Murrell, Vesca Plastic, to B. Jordan, EPA:ESD. Database #: 258. August 30, 1993. Response to Section 114 screening information request for the Freeport, TX, facility.
II-D-643
II-D-644
II-D-645
II-D-646
II-D-647
II-D-648
II-D-649
II-D-650
II-D-651
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-652
Description D. Hubis, W. L. Gore & Associates, Inc. to B. Jordan, EPA:ESD. August 3, 1993. Letter stating that the Elkton, MD, facility is not in the reinforced plastics source category. D. Vaughn, W. R. Grace & Company, to B. Jordan, EPA:ESD. August 31, 1993. Letter stating that the Duncan, SC, facility is not in the reinforced plastics source category. R. Deskin, W. R. Grace & Company, to B. Jordan, EPA:ESD. Database #: 172. September 1, 1993. Response to Section 114 screening information request for the Fort Worth, TX, facility. J. Gilchrist, Waco Fiberglass Inc., to B. Jordan, EPA:ESD. Database #: 124. August 30, 1993. Response to Section 114 screening information request for the Waco, TX, facility. G. Waltersdorff, Waldorf Marble Inc., to B. Jordan, EPA:ESD. Database #: 236. August 31, 1993. Response to Section 114 screening information request for the White Plains, MD, facility. G. Fisher, Walton/Stout, Inc. to B. Jordan, EPA:ESD. August 17, 1993. Letter stating that the Lithonia, GA, facility is not in the reinforced plastics source category. H. Zoback, Warminster Fiberglass Company, to B. Jordan, EPA:ESD. Database #: 460. August 23, 1993. Response to Section 114 screening information request for the Jacksonville, TX, facility. J. Nozicka, Warner Fiberglass Products, to B. Jordan, EPA:ESD. August 25, 1993. Letter stating that the Belding, MI, facility was destroyed in a fire. R. Iannelli, Water Heater Innovations Inc., to B. Jordan, EPA:ESD. Database #: 223. August 30, 1993. Response to Section 114 screening information request for the Eagan, MN, facility. N. Sherman, Wayne Manufacturing Company, to B. Jordan, EPA:ESD. Database #: 122. August 30, 1993. Response to Section 114 screening information request for the Cedar Rapids, IA, facility.
II-D-653
II-D-654
II-D-655
II-D-656
II-D-657
II-D-658
II-D-659
II-D-660
II-D-661
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-662
Description M. Cichanowski, We-No-Nah Canoe, to B. Jordan, EPA:ESD. Database #: 60. August 31, 1993. Response to Section 114 screening information request for the Winona, MN, facility. T. Fusco, Weber & Sons Button Company, Inc., to B. Jordan, EPA:ESD. Database #: 273. August 31, 1993. Response to Section 114 screening information request for the Muscatine, IA, facility. J. Mattoon, Western Recreational Vehicles, to B. Jordan, EPA:ESD. Database #: 114. August 24, 1993. Response to Section 114 screening information request for the Yakima, WA, facility. H. Wagers, Westinghouse Electric Corporation, to B. Jordan, EPA:ESD. September 28, 1993. Letter stating that the Hampton, SC, facility is not in the reinforced plastics source category. W. O'Donnell, Westlake Plastics Company, to B. Jordan, EPA:ESD. August 2, 1993. Letter stating that the Lenni, PA, facility is not in the reinforced plastics source category. B. Struble, Wildon Industries Inc., to B. Jordan, EPA:ESD. Database #: 120. August 30, 1993. Response to Section 114 screening information request for the Mt. Bethel, PA, facility. M. Birgitta, William Kreysler & Associates, Inc., to B. Jordan, EPA:ESD. Database #: 420. September 28, 1993. Response to Section 114 screening information request for the Petaluma, CA, facility. R. Wilson, Wilson Marble Company, to B. Jordan, EPA:ESD. Database #: 142. August 26, 1993. Response to Section 114 screening information request for the Marion, NC, facility. R. Handler, Windsor Fiberglass, to B. Jordan, EPA:ESD. Database #: 55. August 20, 1993. Response to Section 114 screening information request for the Windsor, NJ, facility. H. Lang, Wisconsin Tool & Mold Company, Inc., to B. Jordan, EPA:ESD. August 18, 1993. Letter stating that the Friendship, WI, facility is not in the reinforced plastics source category.
II-D-663
II-D-664
II-D-665
II-D-666
II-D-667
II-D-668
II-D-669
II-D-670
I-D-671
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-672
Description P. Morris, Xaloy, Inc., to B. Jordan, EPA:ESD. August 25, 1993. Letter stating that the Pulaski, VA, facility is not in the reinforced plastics source category. M. Conner, Xenon Company, to B. Jordan, EPA:ESD. Database #: 341. September 14, 1993. Response to Section 114 screening information request for the Ashland, VA, facility. J. Stulb, Xerox Corporation, to B. Jordan, EPA:ESD. September 20, 1993. Letter stating that the Webster, NY, facility is not in the reinforced plastics source category. T. Cahill, Yankee Plastic Company, to B. Jordan, EPA:ESD. Database #: 105. August 30, 1993. Response to Section 114 screening information request for the Davenport, IA, facility. Z. Kline, Zane's Fiberglass Shop, Inc., to B. Jordan, EPA:ESD. Database #: 617. May 17, 1994. Response to Section 114 screening information request for the Scantron, ND, facility. T. Herbert, Zehrco Plastics Inc., to B. Jordan, EPA:ESD. Database #: 450 & 451. August 30, 1993. Response to Section 114 screening information request for Plant I and II of the Ashtabula, OH, facility. T. Dougherty, Zenith Products Company, to B. Jordan, EPA:ESD. September 7, 1993. Letter stating that the Osseo, MN, facility is not in the reinforced plastics source category.
II-D-673
II-D-674
II-D-675
II-D-676
II-D-677
II-D-678
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-679
Description K. Moritz, The Foundation at New Jersey Institute of Technology to J. Edwardson, EPA:ESD. May 5, 1993. Letter requesting comments on the composite plastics industry meeting. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS. May 17, 1993. Fax transmittal regarding issues for discussion with EPA at the June 7, 1993 meeting. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS. May 28, 1993. Fax transmittal with names of representatives planning to attend the June 7, 1993 meeting with EPA. K. Moritz, The Foundation at New Jersey Institute of Technology, to J. Edwardson, EPA:ESD. July 20, 1993. Letter confirming the meeting date of July 28, 1993 to discuss future regulations. S. McNally, Composite Fabricators Association, to J. Berry, EPA. July 21, 1993. Letter inviting Mr. Berry to speak at the Composite Fabricators Association convention. K. Kennsington, Viatec Hastings Engineered Systems, to D. Carroll, PES. July 26, 1993. Letter concerning Viatec facility visit on July 14, 1993. T. Flynn, Allied Signal Laminate Systems, Inc., to M. Strum, EPA:OAQPS. August 3, 1993. Request for an extension until September 10, 1993 for the Section 114 screening survey. L. Zable, Trail Wagons, Inc., to M. Strum, EPA:OAQPS. August 5, 1993. Request for a two-week extension for the Section 114 screening survey. H. Niedworok, Federal Molding Company, to M. Strum, EPA:OAQPS. August 6, 1993. Request for a 30-day extension for the Section 114 screening survey. K. Moritz, The Foundation at New Jersey Institute of Technology, to J. Edwardson, EPA:ESD. August 10, 1993. Letter summarizing the discussion of July 28 between EPA and The Foundation at New Jersey Institute of Technology.
II-D-680
II-D-681
II-D-682
II-D-683
II-D-684
II-D-685
II-D-686
II-D-687
II-D-688
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-689 II-D-690 II-D-691
Description W. McSherry, Omega Pultrusions, to D. Carroll, PES. August 11, 1993. Letter providing information requested by D. Carroll. D. Keller, Viatec Hastings Engineered Systems, to D. Carroll, PES. August 12, 1993. Fax transmission of mold release MSDS. T. Hebert, Picken's Plastics, to G. LaFlam, PES. August 12, 1993. Letter submitting information requested during the Ashtabula, Ohio, site visit. D. Ferguson, ICI Americas, Inc., to B. Jordan, EPA:ESD. August 12, 1993. Request for a 30-day extension for the Section 114 screening survey. J. DeMarco, American Cyanamid Company, to B. Jordan, EPA:ESD. August 18, 1993. Response to Section 114 screening information request for the Perrysburg, Ohio, facility. N. Page, ABCO Industries, to B. Jordan, EPA:ESD. August 19, 1993. Letter stating that ABCO Industries is not in the reinforced plastics source category. W. Williams, DGP Inc., to M. Strum, EPA:OAQPS. August 19, 1993. Request for a 30-day extension for the Section 114 screening survey. J. Duncan, ATEC Associates, Inc., to B. Jordan, EPA:ESD. August 20, 1993. Request for a 30-day extension for Faball Enterprises to respond to the Section 114 screening survey. M. Everhart, Boeing Commercial Airplane Group, to M. Strum, EPA:OAQPS. August 20, 1993. Request for a 30-day extension for the Section 114 screening survey. S. Parker, Ergo Resource Management, Inc., to M. Strum, EPA:OAQPS. August 20, 1993. Request for a 30-day extension for the Section 114 screening survey. D. Bertelson, Gen Corp Automotive to M. Strum, EPA:OAQPS. August 20, 1993. Request for an extension until September 30, 1993 to respond to the Section 114 screening survey for the Marion, Indiana, facility.
II-D-692
II-D-693
II-D-694
II-D-695
II-D-696
II-D-697
II-D-698
II-D-699
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-700
Description R. Mollman, Molded Fiber Glass Companies, to M. Strum, EPA:OAQPS. August 20, 1993. Request for a 30-day extension for the Section 114 screening survey. E. Nguyen, Gen Corp Automotive, to M. Strum, EPA:OAQPS. August 23, 1993. Request for an extension until September 30, 1993 to respond to the Section 114 screening survey for the Ionia, Michigan, facility. M. Conner, The Xenon Company, to M. Strum, EPA:OAQPS. August 23, 1993. Request for an extension until September 10, 1993 to respond to the Section 114 screening survey. D. Howard, Ebonite International, Inc., to B. Jordan, EPA:ESD. August 23, 1993. Response to Section 114 screening information request for the Hopkinsville, KY, facility. K. Myers, Nevamar Decorative Surfaces, to B. Jordan, EPA:ESD. August 23, 1993. Response to Section 114 screening information request for the Odenton, Maryland, facility. T. Peeso, FOSROC, Inc., to B. Jordan, EPA:ESD. August 24, 1993. Letter confirming that FOSROC's processes do not fit the description of a reinforced plastics manufacturer. D. Jensen, American Reinforced Plastics, to B. Jordan, EPA:ESD. August 24, 1993. Request for an extension to respond to the Section 114 screening survey. M. Cooke, Honigman Miller Schwarz and Cohn, to B. Jordan, EPA:ESD. August 25, 1993. Letter stating that Specialty Plastics will return the completed Section 114 screening survey by September 10, 1993. M. Seymour, Feczko and Seymour, to M. Strum, EPA:OAQPS. August 25, 1993. Request for an extension until October 20, 1993 for Matthews Marble Manufacturing Corporation to respond to the Section 114 screening survey.
II-D-701
II-D-702
II-D-703
II-D-704
II-D-705
II-D-706
II-D-707
II-D-708
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-709
Description R. Thiebault, Osborne Industries Inc., to M. Strum, EPA:OAQPS. August 25, 1993. Request for a one-week extension for the Section 114 screening survey. J. Curtin, Ohio EPA, to M. Strum, EPA:OAQPS. August 26, 1993. Information about technology used to control styrene emissions. J. Medney, Compositech Ltd., to B. Jordan, EPA:ESD. August 26, 1993. Response to Section 114 screening information request for the Hauppauge, New York, facility. T. Walczyk, Grace Construction Products, to B. Jordan, EPA:ESD. August 26, 1993. Request for a one-week extension for the Section 114 screening survey. J. Gerard, Myers, to G. LaFlam, PES, Inc., August 27, 1993. Request for an extension until September 17, 1993 to respond to the Section 114 screening survey. J. Boyer, Glastic Corporation, to B. Jordan, EPA:ESD. August 27, 1993. Response to Section 114 screening information request for the South Euclid, Ohio, facility. W. King, International Filter System, Inc., to M. Strum, EPA:OAQPS. August 29, 1993. Letter with information and schematic of the MIDES system. J. Covelli, Leopold Reinforced Plastics, to B. Jordan, EPA:ESD. August 30, 1993. Response to Section 114 screening information request for the Zelienople, PA, facility. J. Chevalier, Baltek Corporation, to M. Strum, EPA:OAQPS. August 30, 1993. Request for a two-week extension for the Section 114 screening survey. D. Donaldson, BP Chemicals, to M. Strum, EPA:OAQPS. August 30, 1993. Request for a 30-day extension for the Section 114 screening survey. J. Session, Carsonite International, to M. Strum, EPA:OAQPS. August 31, 1993. Request for a 30-day extension for the Section 114 screening survey.
II-D-710 II-D-711
II-D-712
II-D-713
II-D-714
II-D-715
II-D-716
II-D-717
II-D-718
II-D-719
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-720
Description R. Dowdell, Crain Industries, to B. Jordan, EPA:ESD. September 2, 1993. Letter stating that Easton Foam Corporation was acquired by Crain Industries and M. Ricciardi will be responding to the Section 114 screening survey. C. Owen, ATEC Environmental Consultants, to B. Jordan, EPA:ESD. September 3, 1993. Response to Section 114 screening information request for Faball Enterprises of Maryland. J. Leone, Xerox Corporation, to M. Strum, EPA:OAQPS. September 7, 1993. Request for an extension until October 1, 1993 to respond to the Section 114 screening survey. FOSROC, to D. Carroll, PES. September 9, 1993. Section 114 response for the Georgetown, KY, facility. (FOSROC does not fit the reinforced plastics source category.) P. McDonnell, Xerxes Corporation, to B. Jordan, EPA:ESD. September 21, 1993. Response to Section 114 screening information request for the Seguin, TX, Lakeland, FL, Williamsport, MD, Tipton, IA, and Anaheim, CA, facilities. D. Winfrey, Swirl-way Plumbing Group, to B. Jordan, EPA:ESD. September 22, 1993. Response to Section 114 screening information request for the Henderson, Texas, facility. F. Mayfield, Fibergrate Corporation, to B. Jordan, EPA:ESD. September 27, 1993. Response to Section 114 screening information request for the Stephenville, Texas, facility. R. Zeiler, BP Chemicals, to B. Jordan, EPA:ESD. September 30, 1993. Response to Section 114 screening information request for the Santa Ana, California, facility. S. Bradley, Rockwell International, to M. Strum, EPA:OAQPS. October 8, 1993. Request for a four-week extension for the Section 114 screening survey. N. Rohan, Structural Composites, Inc., to M. Strum, EPA:OAQPS. October 16, 1993. Cover letter and paper discussing perspectives on styrene emissions.
II-D-721
II-D-722
II-D-723
II-D-724
II-D-725
II-D-726
II-D-727
II-D-728
II-D-729
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-730
Description S. Flowers, Owens-Corning Fiberglass Co., to D. Carroll, PES. November 3, 1993. Response to Section 114 screening information request for the Hazelton, PA, facility. R. DeGraff, R.D. Werner Company, to M. Strum, EPA:OAQPS. November 11, 1993. Response to G. Pagett's request for a copy of the 1991 test report on pultrusion emissions monitoring by Clean Air Engineering. P. McDonnell, Xerxes Corporation, to B. Jordan, EPA:ESD. November 12, 1993. Response to Section 114 screening information request for the Minneapolis, Minnesota, facility. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS. December 15, 1993. Comments on the EPA report on the Polyad process for styrene removal. C. Blue, Xerxes Corporation, to S. Wyatt, EPA:CPB. January 7, 1994. Plant comments on the trip report to the Avon, OH, facility on August 10, 1993. M. Danielsson, Weatherly, to M. Strum, EPA:OAQPS. April 13, 1994. Response to J. Schweitzer's letter of December 15, 1993 regarding the Polyad test. T. Johannsen, ATC Chemical Corporation, to M. Strum, EPA:OAQPS. May 2, 1994. Response to questions about Core Bond potential to reduce styrene emissions. J. Goode, Ralph Wilson Plastic Co., to M. Strum, EPA:OAQPS. August 5, 1994. Response to Section 114 screening information request for the Temple, TX, facility. H. Goltz, Dow Chemical Company, to M. Strum, EPA:OAQPS. December 9, 1994. Letter and article discussing the use of Dow Polymeric adsorbents in conjunction with the Weatherly Polyad system for controlling styrene vapor emissions. J. Schweitzer, Composites Institute, to T. Clemons, EPA. February 6, 1995. Issues to be discussed at the February 22, 1995 meeting between EPA and the Composites Fabricators Association.
II-D-731
II-D-732
II-D-733
II-D-734
II-D-735
II-D-736
II-D-737
II-D-738
II-D-739
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-740
Description G. Swiech, Akzo Polymer Chemicals, to M. Strum, EPA:OAQPS. February 7, 1995. Letter and article discussing the effect of a peroxide initiator on styrene emissions. G. House, Gougeon Brothers, Inc., to M. Strum, EPA:OAQPS. March 21, 1995. Letter providing information about Gougeon Brothers epoxy products. R. Sundberg, SETCO, Inc., to M. Strum, EPA:OAQPS. May 31, 1995. Letter providing test report on the MIAB fluidized bed carbon adsorber/desorber and information on operating costs. D. Niezgodski, Weatherly, Inc., to G. LaFlam, PES. June 16, 1995. Corrections to the conference call on May 24, 1995. L. Coenen, Grace TEC Systems, to G. LaFlam, PES. June 16, 1995. Corrections to the conference call on May 24, 1995. E. Dally, Zapit Technology, Inc., to M. Strum, EPA:OAQPS. June 20, 1995. Description of Zapit electron beam system, operating costs, and destruction efficiency in its application to styrene. P. Blystone, Purus, Inc., to G. LaFlam, PES. June 22, 1995. Corrections to the conference call on May 24, 1995. R. Sundberg, SETCO, Inc., to G. LaFlam, PES. June 22, 1995. Corrections to the conference call on May 24, 1995. A. Munters, Ahlqvist & Munters Technologies, Inc., to G. LaFlam, PES. June 22, 1995. Corrections to the conference call on May 24, 1995. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS. July 5, 1995. Cover letter and 3 documents contributing to MACT development process. M. Seymour, LASCO Bathware, to M. Strum, EPA:OAQPS. July 7, 1995. Letter responding to information requested for the South Boston facility. D. Schiltz, Ohio EPA, to M. Strum, EPA:OAQPS. July 26, 1995. Ohio EPA permit to install for A.R.E., Inc.
II-D-741
II-D-742
II-D-743 II-D-744 II-D-745
II-D-746 II-D-747 II-D-748
II-D-749
II-D-750
II-D-751
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document No. II-D-752
Description G. Tunis, Hardcore DuPont Composites, to M. Strum, EPA:QAQPS and J. Spooner, EPA:OPPT. August 9, 1995. Letter concerning the invitation to the pre-MACT Conference where Hardcore presented information about the SCRIMP process. M. Wax, Institute of Clean Air Companies, to M. Strum, EPA:OAQPS. August 11, 1995. Facsimile transmission: Answers to questions about the use of thermal oxidizers to control VOC emissions at reinforced plastic composites facilities. T. Hedger, Magnum Industries, to J. Best, PES. September 25, 1995. Facsimile transmission: List of customers using Flo-Coaters.
II-D-753
II-D-754
Document Number II-D-755
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. G. Benker, Diamond Fiberglass Fabricators, Inc., to EPA. Response to industry-initiated questionnaire for reinforced plastic composite manufacturers of corrosion-resistant products for Victoria, Texas, facility. 2 pp. A. Gupta, Durr Industries, Inc., to M. Strum, EPA:OAQPS:CCPG. Response to request for additional information on add-on control costs. 12 pp. G. Nicholson, Viatec, Inc., to EPA. Response to industry-initiated questionnaire for reinforced plastic composite manufacturers of corrosionresistant products for Hastings/Belding facilities. 8 pp.
Date of Document No Date
II-D-756
No Date
II-D-757
No Date
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-758
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. R. Watkins, Fibrex Corp., to EPA. Response to industry-initiated questionnaire for reinforced plastic composite manufacturers of corrosionresistant products for Burlington, Washington, facility. 1 p. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. Excerpts from the 1162 Research Report by the South Coast Air Quality Management District for use in discussion at a June 7, 1993 EPA/Industry meeting. 19 pp. S. McNally, Composites Fabricators Assoc., (CFA), to M. Strum, EPA:OAQPS:CCPG. Letter concerning the list of companies compiled for the screening information request mailing. 1 p. D. Winfrey, Swirl-Way Plumbing Group, to B. Jordan, EPA:OAQPS:ESD. Response to Section 114 information collection request for Henderson, Texas, facility. 9 pp. Confidential Business Information located in CNN308/93185-C18-06. 3 pp. G. Tunis, Hardcore Du Pont Composites, L.L.C., to M. Strum, EPA:OAQPS:CCPG. Letter describing Seemann Composites Resin Infusion Molding Process, (SCRIMP) technology, Preliminary VOC test results from TPI Inc., and VOC Test Report from Hardcore DuPont Composites. 12 pp. R. Neilson, Clark County Health District, to M. Strum, EPA:OAQPS:CCPG. Information gathered from the LASCO Bathware on Moapa, Nevada, facility. 3 pp.
Date of Document No Date
II-D-759
May 26, 1993
II-D-760
August 27, 1993
II-D-761
September 22, 1993
II-D-762
October 11, 1995
II-D-763
October 18, 1995
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-764
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. W. Vierkandt, Lippert Corp., to W. Dunston, EPA:OAQPS:CCPG. Clarifications for the HAP report. 2 pp. T. Walczyk, Enduro Composite Systems, to W. Dunston, EPA:OAQPS:CCPG. Response to request for information on Enduro Composite Systems thermal oxidizer. 1 p. E. Dotson, BYK-Chemie USA, to M. Strum, EPA:OAQPS:CCPG. Information about BYK S-740 - an additive for reducing styrene emissions. 26 pp. M. Smith, Crane Cor Tec, to M. Strum, EPA:OAQPS:CCPG. Description of the test method and the results for oven/vacuum bag testing. 7 pp. S. McNally, Composites Fabricators Assoc., (CFA), to M. Strum, EPA:OAQPS:CCPG. Overview and summary of CFA hand lay-up emissions study. 22 pp. A. Santos, California Air Resources Board, to M. Strum, EPA:OAQPS:CCPG. Response to Core Issues from the September 27, 1995 pre-MACT meeting. 3 pp. M. Seymour, LASCO Bathware, to M. Strum, EPA:OAQPS:CCPG. Information on averaging format (control status expression) for the eight LASCO Bathware facilities. 5 pp. R. Sundberg, SETCO, Inc., to M. Strum, EPA:OAQPS:CCPG. Letter discussing issues of styrene polymerization on carbon filters. 1 p.
Date of Document October 19, 1995
II-D-765
October 24, 1995
II-D-766
October 26, 1995
II-D-767
October 26, 1995
II-D-768
October 30, 1995
II-D-769
November 1, 1995
II-D-770
November 1, 1995
II-D-771
November 3, 1995
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-772
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. T. Cowly, The Dow Chemical Co., to M. Strum, EPA:OAQPS:CCPG. Results of volatile organic emissions from paint can lid testing for specific resins. 2 pp. T. Cowly, The Dow Chemical Co., to M. Strum, EPA:OAQPS:CCPG. Static method for determination of volatile emissions from polyester and vinyl ester resins and information on DERAKANE low emission resins and styrene suppressant. 5 pp. C. McPhee, State of Ohio Environmental Protection Agency, to M. Strum, EPA:OAQPS:CCPG. Letter and attachments concerning gel coat and lay-up operations at U.S. Fiberglass Products, Inc., in Middlebranch, Ohio. 11 pp. D. Niezgodski, Weatherly Inc., to M. Strum, EPA:OAQPS:CCPG. Information on American Standard’s airflow from the Salem, Ohio, manual spraying plant. 3 pp. R. Renko Richmond Tech-Air, to M. Strum, EPA:OAQPS:CCPG. Air Management: Ventilation Design Comparison Analysis. 7 pp. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. Estimation of Emission Reductions Associated with Pollution Prevention Practices in the Composite Plastics Industry. 22 pp.
Date of Document December 5, 1995
II-D-773
December 7, 1995
II-D-774
December 20, 1995
II-D-775
January 10, 1996
II-D-776
February 27, 1996
II-D-777
March 13, 1996
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-778
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. E. Raphael, Navistar International Transportation Corp., to M. Strum, EPA:OAQPS:CCPG. Letter and SMC machine emission test performed at the Columbus Plastics Operation in April 1991. 38 pp. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. MACT floor determination concerns and suggestions resulting from the teleconference with EPA on March 20, 1996. 7 pp. S. McNally, Composites Fabricators Assoc., (CFA), to M. Strum, EPA:OAQPS:CCPG. MACT floor determination concerns and suggestions resulting from the teleconference with EPA on March 20, 1996. 3 pp. P. Brewer, Oregon Department of Air Quality, to M. Strum, EPA:OAQPS:CCPG. Cost information concerning the BACT analysis and requirements for Aqua Glass West’s Klamath Falls, Oregon, facility. 3 pp. R. Sundberg, SETCO, Inc., to M. Strum, EPA:OAQPS:CCPG. Response to request for information on adsorption of methyl methacrylate on activated carbon. 1 p. C. Russell, The Boeing Co., to M. Strum, EPA:OAQPS:CCPG. Letter and table providing revised data regarding Boeing’s 1992 screening survey showing no usage of styrenecontaining resins. 10 pp.
Date of Document March 21, 1996
II-D-779
April 1, 1996
II-D-780
April 11, 1996
II-D-781
April 16, 1996
II-D-782
April 29, 1996
II-D-783
May 21, 1996
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-784
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. John Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. Memorandum from N. Cray, Werner Co., to John Schweitzer , Composites Institute, concerning the Solomat Hotwire Anemometer. 6 pp. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. The Non-Economic Impacts of Incineration Controls for the Reinforced Plastics Industry. 49 pp. J. Barker, Morrison Molded Fiber Glass Co., to M. Proctor, PES, Inc. Letter and Section 114 information collection requests for the Morrison Molded Fiber Glass Co.’s Bristol, Virginia and the Quazite San Jose, California, facilities. 17 pp. L. Craigie, The Dow Chemical Co., to M. Strum, EPA:OAQPS:CCPG. Letter and attached data and analysis from a filament winding study conducted at The Dow Chemical Co. 11 pp. D. Kniess, Resolite, to M. Strum, EPA:OAQPS:CCPG. Letter and attached list of resin HAP levels as received and as used, methods used to report emissions in 1994 and 1995, and test procedures and results for 1994 stack test. 10 pp.
Date of Document June 14, 1996
II-D-785
June 26, 1996
II-D-786
June 26, 1996
II-D-787
June 27, 1996
II-D-788
June 29, 1996
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-789
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. W. Greig, Enduro Systems, Inc., to L. Herring, EPA:OAQPS:CCPG. Letter confirming EPA’s July 9, 1996 visit to the Enduro Systems, Inc., operations in Fort Worth, Texas, and the three week extension granted to Enduro Systems, Inc., to respond to the EPA’s document request. 2 pp. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. Outline of the Composite Institute’s position on incinerators for consideration in July 15, 1996 conference call. 3 pp. M. Wax, Institute of Clean Air Companies, to M. Strum, EPA:OAQPS:CCPG. Comments on a report prepared for the Composites Institute, entitled “The Non-Economic Impacts of Incineration Controls for the Reinforced Plastics Industry”. 5 pp. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. Pultrusion Industry Council’s proposal for MACT Standards for Pultrusion. 8 pp. H. North, LASCO Panel Products , to M. Strum, EPA:OAQPS:CCPG. Letter and three attachments: (1) Mass Balance protocol, (2) results and forms for Mass Balance test conducted in January 1993, and (3) results of Mass Balance test conducted, in March 1993. 21 pp.
Date of Document July 3, 1996
II-D-790
July 12, 1996
II-D-791
July 19, 1996
II-D-792
July 22, 1996
II-D-793
July 22, 1996
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-794
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. D. Schiltz, Canton City Health Dept., to M. Proctor, PES, Inc. Response to request for information about A.R.E. and installation of their thermal oxidizer. 11 pp. A. Gupta, Durr Industries, Inc., to M. Strum, EPA:OAQPS:CCPG. RTO performance and NOx emissions. 6 pp. M. Brand, Leonard, Street, and Deinard (representing Tecton Products), to M. Toomer, EPA:OAQPS. Letter and revised EPA draft trip report of June 4-5, 1996 visit. 4 pp. Confidential Business Information located in CN-N404-4/96185-C18-04. 6 pp. C. Studer, Spokane County Air Pollution Control Authority, to M. Strum, EPA:OAQPS:CCPG. Letter providing information concerning Fiber-Tech Industries, Inc. 14 pp. J. Denchfield, Fleetwood Enterprises, Inc., to M. Proctor, PES, Inc. Response to request for information on October 8, 1996 for resins used at Gold Shield of Indiana, Inc., Plant 43, and Gold Shield Fiberglass, Inc., Plant 58. 5 pp. L. Craigie, The Dow Chemical Co., to M. Strum, EPA:OAQPS:CCPG. Letter and attachments about products available to corrosion fabricators which reduce styrene emissions. 10 pp.
Date of Document August 6, 1996
II-D-795
August 6, 1996
II-D-796
August 29, 1996
II-D-797
September 5, 1996
II-D-798
October 10, 1996
II-D-799
October 17, 1996
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-800
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. H. North, LASCO Panel Products , to M. Strum, EPA:OAQPS:CCPG. Response to request for additional facility information requested on September 20, 1996. 2 pp. K. Doeden, Raven Industries, to M. Proctor, PES, Inc. Raw material usage for centrifugal casting, chop spray lay-up, and filament winding. 21 pp. C. Richey, A.R.E., to M. Proctor, PES, Inc. Material safety data sheets for several resins and gel coats. 7 pp. M. Terrell, Smith Fiberglass Products, Inc., to M. Strum, EPA:OAQPS:CCPG. Response to industry-initiated questionnaire for reinforced plastic composite manufacturers of corrosionresistant products for Little Rock, Arkansas, facility. 1 p. Confidential Business Information located in CN-N801/93185-C18. 8 pp. L. Craigie, The Dow Chemical Co., to M. Strum, EPA:OAQPS:CCPG. Letter containing table providing most of the DERAKANE epoxy vinyl ester resins sold by The Dow Chemical Co., into the corrosion resistant products market, their styrene content, year introduced and typical applications. 1 p. D. Boyd, Daniel P. Boyd & Associates (representing G.W. Composite, Inc.), to M. Strum, EPA:OAQPS:CCPG. Letter providing 1996 resin usage for the G.W. Composites, Inc., O’Fallon, Missouri, facility. 2 pp.
Date of Document October 18, 1996
II-D-801
November 5, 1996
II-D-802
November 8, 1996
II-D-803
November 26, 1996
II-D-804
December 10, 1996
II-D-805
December 16, 1996
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-806
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. D. Evans, Creative Pultrusions; T. Griffiths, Omega Pultrusions; and J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. Letter reporting the Pultrusion Industry Council’s status on providing information on the design rates of leakage, and backflow from perform and direct die injectors. 2 pp. J. Alanko, ARCTEK, Inc., to M. Strum, EPA:OAQPS:CCPG. Copy of ARTEK, Inc. brochure detailing the CCBM (vacuum bag) technology. 28 pp. J. Hayducsko, State of Wisconsin, to M. Strum, EPA:OAQPS:CCPG. Answers to questions concerning styrene emissions from the FG Products’ Rice Lake, Wisconsin, facility, and a material safety data sheet for a polyester resin used by FG Products. 11 pp. J. Von Bargen, Ship & Shore, (for Bristol Skylites), to M. Strum, EPA:OAQPS:CCPG. VOC source test results for the skylight manufacturing process in the Santa Ana, California, facility. 10 pp. J. Schweitzer, Composites Institute, to H. North, LASCO Panel Products, (cc: M. Strum, EPA:OAQPS:CCPG and C. Randazzo, Composites Institute). Request for generic descriptions for panel products to be run during LASCO Panel Products’ emission test. 1 p.
Date of Document December 20, 1996
II-D-807
January 8, 1997
II-D-808
January 17, 1997
II-D-809
January 23, 1997
II-D-810
February 12, 1997
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-811
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. S. McNally, Composites Fabricators Assoc., (CFA), to M. Strum, EPA:OAQPS:CCPG. Material safety data sheets for resins and gel coats used by Lippert Corp.. 14 pp. E. Studinka, Wilsonart International, Inc., to M. Proctor, PES, Inc. Updated Section 114 information collection request for Gibraltar Temple, Texas, facility. 8 pp.
Date of Document March 24, 1997
II-D-812
March 26, 1997
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-813
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. D. Herzog, Interplastic Corporation, to R. Jemison, PES, Inc. Response to request for information on vinyl ester resins and corrosionresistant isophthalic polyester resins. 1 p. R. Iannelli, Water Heater Innovations, to M. Strum, EPA:OAQPS:CCPG. Material safety data sheet for RE-ENTRY FGL Solvent-2000. 4 pp. J. DeMarco, Cytec Industries, to B. Jordan, EPA:OAQPS. Response to Section 114 information collection request for facility in Perrysburg, Ohio. 12 pp. Confidential business information located at CN-N308-14/ 93185-C18-14. 1 p. Leopold Reinforced Plastics, to EPA. Response to Section 114 information collection request for facility in Zelienople, Pennsylvania. Previously recorded as II-D-716 as all confidential business information, and has been partially declassified. This item contains the declassified information. 7 pp. Confidential business information is located at CN-N308-15/ 93185-C18-15. 1 p. C. Liddy, Aqua Glass, to B. Jordan, EPA:OAQPS. Response to a survey on operations for the facility in Adamsville, Tennessee. 1 p. Confidential business information located at CN-N504-5. 2 pp.
Date of Document No Date
II-D-814
August 3, 1993
II-D-815
August 18, 1993
II-D-816
August 30, 1993
II-D-817
September 3, 1993
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-818
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. P. McDonnell, Xerxes Corp., to EPA. Response to Section 114 information collection request for facilities in Seguin, Texas; Lakeland, Florida; Williamsport, Maryland; Tipton, Iowa; and Anaheim, California. Previously recorded as II-D-724 as all confidential business information, and has been partially declassified. This item contains the declassified information. 22 pp. Confidential business information is located at CN-N308-22/ 93185-C18-04. 26 pp. B. Maindelle, Ralph Wilson Plastics Co., to M. Strum, EPA:OAQPS:CCPG. Response to Section 114 information collection request for facility in Temple, Texas. Previously recorded as II-D-737 as all confidential business information, and has been partially declassified. This item contains the declassified information. 19 pp. Confidential business information is located at CN-N308-20/ 94185-C18-02. 12 pp. B. Kinman, Fibercast Company, to W. Dunston, EPA:OAQPS:CCPG. Response to July 7, 1995 request for information on centrifugal casting process and its control for the facility in Tulsa, Oklahoma. 1 p. Confidential business information is located at CN-N404-5/ 95185-C18-03. 3 pp. V. Shah, The Budd Company, to C. Delbecq, EPA:Region 5. “Styrene Emissions During the Charging/Molding Cycles,” and “Styrene Emissions During Vacuum Molding.” 6 pp.
Date of Document September 21, 1993
II-D-819
August 5, 1994
II-D-820
August 2, 1995
II-D-821
September 28, 1995
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-822
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. R. Roller, Pennsylvania Department of Environmental Protection Southcentral Region, to M. Strum, EPA:OAQPS:CCPG. Comments on the use of the emission factor generated by testing at Creative Pultrusion in the proposed MACT standards for the fiberglass industry. 2 pp. C. Stainer, NEVAMAR Decorative Sources, to M. Strum, EPA:OAQPS:CCPG. Response to April 22, 1996 letter requesting cost and permanent total enclosures to capture styrene emissions from continuous polyester casting operations. 1 p. Confidential business information is located at CN-N404-4/ 93185-C18-11B. 3 pp. J. Wilgus, American Standard Inc., to M. Strum, EPA:OAQPS:CCPG. Response to May 3, 1996 request for information on operations at the facility in Salem, Ohio. 1 p. Confidential business information located at CN-N404-6/ 96185C18-03. 2 pp. J. Wilgus, American Standard, to B. Weinberg, Ohio EPA, Division of Air Pollution Control. Questions concerning determining capture efficiency for a curing oven and spray booth. 3 pp. M. Bahner, Research Triangle Institute, to M. Strum, EPA:OAQPS:CCPG and N. Kaplan, EPA:APPCD:MD-04. Corrections to styrene control cost spreadsheets and cost figures. 6 pp.
Date of Document January 25, 1996
II-D-823
May 28, 1996
II-D-824
June 14, 1996
II-D-825
July 2, 1996
II-D-826
October 9, 1996
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-827
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. P. Margherio, Crane Kemlite Company Inc., to M. Strum, EPA:OAQPS:CCPG. Follow-up to request to identify any CBI in the August 19, 1996 meeting minutes between EPA and Kemlite Company Inc. (See II-E-47.) 3 pp. Confidential business information is located at CN-N504-2/ 96185-C18-09A. 3 pp. 1 diskette. R. Kinman, Fibercast Company, to M. Toomer, EPA:OAQPS:Docket. Corrections and comments to draft site visit report for July 10, 1996 visit to Sand Springs, Oklahoma. 1 p. Confidential business information located at CN-N404-7/ 95185-C18-03A. 18 pp. 1 diskette. J. Wilson, Olympic Air Pollution Control Authority, to D. Dellarco, EPA: Region 10. Review of source test report for Lasco Bathware Inc., facility in Yelm, Washington. 2 pp. J. Hayducsko, State of Wisconsin, to M. Strum, EPA:OAQPS:CCPG. Response to questions concerning styrene emissions and operations at FG Products’ facility in Rice Lake, Wisconsin. 1 p. J. Von Bargen, Ship & Shore, C.D.I./A.M.J., Inc., to M. Strum, EPA:OAQPS:CCPG. Source test results for Bristolite Skylites' facility, in Santa Ana, California. 22 pp.
Date of Document November 4, 1996
II-D-828
November 14, 1996
II-D-829
December 13, 1996
II-D-830
January 17, 1997
II-D-831
January 23, 1997
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-832
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. D. Scherr, North Dakota Department of Health, to M. Strum, EPA:OAQPS:CCPG. Four enclosures pertaining to a Tecton Products plant in Fargo, ND: 1) Renewed permit to operate for a window and door lineals plant (expiration 8/20/01), 2) permit to construct for a window and door lineals plant, 3) air quality effects analysis, and 4) permit to construct application and three additional applications for additional permits. 26 pp. B. Lacovara, Composite Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Phase II preliminary results for mold size and configuration comparison study - spray-up and filled systems comparison study - spray-up. 2 pp. L. Craigie, The Dow Chemical Co., to M. Strum, EPA:OAQPS:CCPG. Several brochures for the Derakane resin family including: “Seven Ways to Reduce Monomer Emissions and Resist Corrosion ;” “Derakane Epoxy Vinyl Ester Resins: Technical Product Information;” “Derakane Epoxy Vinyl Resins. Chemical Resistance and Engineering Guide;” and “Fabricating Tips." 137 pp.
Date of Document February 27, 1997
II-D-833
March 4, 1997
II-D-834
May 6, 1997
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-835
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. J. DeMarco-Handley, Cytec Industries Inc., to M. Strum, EPA:OAQPS:CCPG. Letter transmitting October 9 and 10, 1996 source test report information for Cytec's Perrysburg, Ohio facility, including four items: 1) April 8, 1997 letter from Ohio EPA to Cytec Industries confirming test report data and including summary test data, 2) October 14, 1996 letter from Clayton Environmental Services to Cytec Industries submitting analytical laboratory report for test samples, 3) “Public Domain” version of the test report, and 4) Confidential test report. 83 pp. Confidential business information is located at CN-N801-4/ 96185C18-08B. 92 pp. L. Craigie, The Dow Chemical Co., to M. Strum, EPA:OAQPS:CCPG. Seemann Composites Resin Infusion Molding Process (SCRIMP) data from typical test. 2 pp. R. Ewald, Polydyne, Inc., to M. Proctor, PES, Inc. Material safety data sheets for two gel coats used by Style Crest Products. 3 pp. B. Smith, Oasis, to M. Proctor, PES, Inc. Correction to 1993 survey Resin HAP percentage via material safety data sheet for Stypol 040-5805. 7 pp. M. Dahl, Wayne Manufacturing Company of Cedar Rapids, to M. Proctor, PES, Inc. Material safety data sheet for AROPOL Q6944 ACC GP. 3 pp.
Date of Document May 8, 1997
II-D-836
May 13, 1997
II-D-837
June 12, 1997
II-D-838
July 14, 1997
II-D-839
July 14, 1997
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-840
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. L. Oblinger, Global Glass Inc., to EPA. Response to 1996 Gel Coat survey for facility at Old US 33 West, Elkhart, Indiana, and material safety data sheets. 18 pp. L. Oblinger, Global Glass Inc., to EPA. Response to 1996 Gel Coat survey for the facility at 56741 Elk Park Drive, Elkhart, Indiana, and material safety data sheets. 10 pp. W. Holtzclaw, MFG Justin Tanks, Inc., to M. Strum, EPA:OAQPS:CCPG. Identification of discrepancies in resin usage between 4/17/97 EPA database and MFG Justin Tanks' response to EPA's 1993 survey. 12 pp. B. Brody, Ashland Chemical Company, to M. Proctor, PES, Inc. Response to request for information about Aropol Q6944. 1 p. R. Sandstrom, Johnson Truck Bodies, to M. Strum, EPA:OAQPS:CCPG. Response to 1996 Gel Coat Usage survey and appropriate material safety data sheets for the facility in Rice Lake, Wisconsin. 81 pp. B. Duvall, Aker Plastics, to M. Strum, EPA:OAQPS:CCPG. Response to 1996 Gel Coat Usage survey and appropriate material safety data sheets for Aker's facilities in Plymouth, Indiana (2) and in Martinsburg, WV (1). 30 pp.
Date of Document July 23, 1997
II-D-841
July 23, 1997
II-D-842
July 25, 1997
II-D-843
July 29, 1997
II-D-844
July 30, 1997
II-D-845
August 25, 1997
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-846
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. R. Dulany, Country Coach, Inc., to M. Strum, EPA:OAQPS:CCPG. Response to 1996 Gel Coat Usage survey and appropriate material safety data sheets for Country Coach Inc., facility of Junction City, Oregon. 83 pp. To M. Strum, EPA:OAQPS:CCPG. Response to 1996 Gel Coat Usage surveys and appropriate material safety data sheets for two facilities: 1) MAAX/Bremen Glas facility of Bremen, Indiana, and Response to 1996 Gel Coat Usage survey for MAAX/Cedar Manufacturing facility of Marion, Iowa. 67 pp. To M. Strum, EPA:OAQPS:CCPG. Response to 1996 Gel Coat Usage survey and appropriate material safety data sheets for Prestigious Accessories, Inc., facility of Tyler, Texas. 13 pp. S. Stevens, Tri-Glas Corporation, to M. Strum, EPA:OAQPS:CCPG. Response to 1996 Gel Coat Usage survey and appropriate material safety data sheets for Tri-Glas Corporation facility of Daleville, Alabama. 76 pp. R. Davidson, Ultra/Glas of Lakeville, Inc., to M. Strum, EPA:OAQPS:CCPG. Response to 1996 Gel Coat Usage survey and appropriate material safety data sheets for Ultra/Glas facility of Lakeville, Indiana. 6 pp.
Date of Document September 1997
II-D-847
September 1997
II-D-848
September 1997
II-D-849
September 1997
II-D-850
September 1997
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-851
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. J. Jambois, Tecton Products, to M. Strum, EPA:OAQPS:CCPG. Confirmation that site visit report for June 4 and 5, 1996 is acceptable for public access. 4 pp. Confidential business information is located at CN-N404-3/ 98185-C18-04. 82 pp. 1 diskette. R. Leitzman, Cytec Industries, Inc., to M. Proctor, PES, Inc. Permission to declassify equation for estimating styrene emissions from mixer from confidential business information. 3 pp. W. Toms, Lund Industries, Inc., to M. Strum, EPA:OAQPS:CCPG. Response to 1996 Gel Coat Usage survey for Lund Industries facility of Anoka, Minnesota. 4 pp. L. Craigie, The Dow Chemical Company, to M. Strum, EPA:OAQPS:CCPG. Letter transmitting a table providing styrene content of resin systems and three product brochures which describe HAP content and corrosion resistance of the DERAKANE* family of epoxy vinyl ester resins. Brochures may be found in II-D-834. 1 p. R. Haberlein, Engineering Environmental Consulting Services, to M. Strum, EPA:OAQPS:CCPG. Addendum to the Derivation and Verification of the CFA Emission Models. 5 pp.
Date of Document September 8, 1997
II-D-852
September 10, 1997
II-D-853
September 12, 1997
II-D-854
September 29, 1997
II-D-855
October 10, 1997
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-856
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. D. Evans, Creative Pultrusions, to M. Strum, EPA:OAQPS:CCPG. Draft Section B of Pultrusion MACT for review and comment. 3 pp. J. Schweitzer, Composites Fabricators Assoc., (CFA), to M. Strum, EPA:OAQPS:CCPG. List of contacts at the polyester resin suppliers. 1 p. T. Hedger, Magnum Industries, to M. Strum, EPA:OAQPS:CCPG. List of flowcoat and potential flowcoat equipment customers. 1 p. Confidential business information located at CN-N801-11/ 98185-C18-01. 5 pp. R. Hoffman, Interplastic Corp., to M. Proctor, PES, Inc. Sales literature on corrosionresistant resins. 43 pp. J. Alanko, Arctek Inc., to M. Strum, EPA:OAQPS:CCPG. Closed Cavity Bag Molding Technology Licensed User Reference List. 3 pp. S. McNally, Composites Fabricators Association, to B. Jordan, EPA:OAQPS:ESD. Proposed plan for MACT enforcement of Controlled Spray technique. 35 pp. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. Comments on October 27, 1997 meeting between EPA and representatives of the Pultrusion Industry Council in Durham, North Carolina. 1 p.
Date of Document October 14, 1997
II-D-857
October 15, 1997
II-D-858
October 28, 1997
II-D-859
November 4, 1997
II-D-860
November 7, 1997
II-D-861
November 11, 1997
II-D-862
November 13, 1997
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-863
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. T. McQuarrie, Glasforms Inc., to M. Strum, EPA:OAQPS:CCPG. Industry proposed check list for wet area enclosures for the MACT for existing sources for pultrusion. 2 pp. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. Proposed agenda for the January 5, 1998 meeting and discussion of feasibility of the MACT standard for open molding. 19 pp. S. McNally, Composite Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Presentation entitled "An Approach to the Maximum Available Control Technology for the Polymer Casting Sub-Category of the Reinforced Plastic Composites NESHAP." 6 pp. J. Clark, Fountain Power Boats Inc., to B. Palmer, Eastern Research Group. Response to request for information on resin acceptance procedure and estimated costs. 3 pp. S. Brackins, GL&V LaValley Industries, Inc., to R. Jemison, PES, Inc. Material safety data sheet for Hetron 980/35, the Ashland Chemical vinyl ester resin used at LaValley Industries' facility in Vancouver, WA. 8 pp. R. Coleman, Micro-Fab, Inc., to R. Jemison, PES, Inc. Material safety data sheet for Cook Composites and Polymers Company's Aqua resin (944GT014). 7 pp.
Date of Document November 24, 1997
II-D-864
December 31, 1997
II-D-865
January 5, 1998
II-D-866
January 9, 1998
II-D-867
January 20, 1998
II-D-868
January 27, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-869
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. T. Pepper, Ashland Chemical Company, to M. Strum, EPA:OAQPS:CCPG. Notification that information request is being deferred to the Technical Subcommittee for a secrecy agreement and an invitation to meet to discuss this issue. 1 p. A. Kaeding, CDR Systems Corp., to M. Proctor, PES, Inc. Response to request for information about HAP percentages. 2 pp. E. Miller, Millennium Products Inc., to R. Jemison, PES, Inc. Correction to previous information provided indicating that they use a flowcoater to apply their gelcoat, when they actually use HVLP Spray Gun. 1 p. J. Schweitzer, Composites Institute, to M. Strum, EPA:OAQPS:CCPG. Draft Possible Cost Impact Methodology. 3 pp. J. Price, Shakespeare Composites & Electronics, to R. Jemison, PES, Inc. General discussion of costs asssociated with using a lower styrene content resin. 1 p. T. McQuarrie, Glasforms Inc., to M. Strum, EPA:OAQPS:CCPG. Request that the Title V Styrene Emission Factor Report, which was submitted October 27, 1997 for the facility in Birmingham, Alabama, be addressed in terms of pounds of styrene per ton of resin processed. 6 pp.
Date of Document January 30, 1998
II-D-870
January 30, 1998
II-D-871
February 18, 1998
II-D-872
March 23, 1998
II-D-873
March 25, 1998
II-D-874
March 27, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-875
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. M. Birgitta, William Kreysler & Assoc., Inc., to R. Jemison, PES, Inc. Material safety data sheet for polyester gel coat, neutral base (67X147). 6 pp. D. Evans, Creative Pultrusions, to Pultrusion Industry Council. Summary of four control options and task assignments discussed during the April 17, 1998 teleconference between EPA and representatives of the Pultrusion Industry Council. 5 pp. L. Craigie, The Dow Chemical Company, to M. Strum, EPA:OAQPS:CCPG. Styrene content, sales price, and typical applications of most of the DERKANE epoxy vinyl ester resins sold by The Dow Chemical Company in the open molding corrosion-resistant products market. 1 p. M. Charter, Venus-Gusmer, Inc., to M. Strum, EPA:OAQPS:CCPG. Comments on impending MACT standards for styrene emissions and flow coat technology. 2 pp. M. Grotke, Alpha Owens Corning, to M. Strum, EPA:OAQPS:CCPG. Resin cost information. 1 p. Confidential business information located at CN-N801-13/ 98185C18-03. 2 pp. C. Nelson, FG Products, Inc., to R. Jemison, PES, Inc. Transmittal of a spreadsheet covering total resin and gel coat usage for 1997, including material safety data sheets for promoter and catalyst not in the spreadsheet. 8 pp.
Date of Document April 1, 1998
II-D-876
April 17, 1998
II-D-877
April 27, 1998
II-D-878
April 28, 1998
II-D-879
May 1, 1998
II-D-880
May 4, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-881
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. J. Schweitzer, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Suggested revisions to EPA’s March 17, 1998 database. 2 pp. B. Brody, Ashland Chemical Company, to M. Strum, EPA:OAQPS:CCPG. Response to request for information on resin pricing and HAP content for open molding. 1 p. Confidential business information located at CN-N801-14/ 98185-C18-04. 1 p. T. McQuarrie, Glasforms, Inc., to L. Herring, EPA:OAQPS:CCPG. Suggested changes to wet area enclosure definition and supporting material. 2 pp. Confidential business information is located at CN-N801-12/ 98185C18-02. 177 pp. 1 video tape. 1 cassette tape. 1 diskette. 62 photos. J. Schweitzer, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Letter suggesting certain factors to be included in the EPA's analysis of the costs of complying with MACT, and a proposed definition for corrosion-resistant resins. 7 pp. J. Gauchel, Owens Corning Science and Technology Center, to M. Strum, EPA:OAQPS:CCPG. Letter transmitting tapes illustrating the injection die pultrusion process. 1 p.
Date of Document May 5, 1998
II-D-882
May 7, 1998
II-D-883
May 8, 1998
II-D-884
May 9, 1998
II-D-885
May 10, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-886
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. S. McNally, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Industry recommendations regarding MACT for polymer casting, mixing, and blending and an approach to new source MACT. 13 pp. T. Hedger, Magnum Industries, to M. Strum, EPA:OAQPS:CCPG. Information on flow coaters including flled flow coat, flow coat emission concerns, Magnum certification procedures, and various other informataion on Magnum flow coaters. 92 pp. B. Lacovara, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. CFA Vapor Suppressant Effectiveness Test, Working Draft. 4 pp. L. Meredith, Alabama Department of Environmental Management, to M. Strum, EPA:OAQPS:CCPG. Letter transmitting “No. 4 Permacasting Line Total Hydrocarbon and Styrene Emission Test Report.” Roy F. Weston, Inc. February 1997. 96 pp. B. Dannhauer, Kalwall Corporation, to K. Meardon, PES, Inc. Transmittal of (1) a summary of “Emission Testing Report for Emission Sources Sampled, Bow, New Hampshire Flat Sheet Plant, August 24, 1994,” and (2) selected pages from a draft of the 8/24/94 emission test report. 23 pp. A. Hepler, Reichhold Chemicals, Inc., to M. Strum, EPA:OAQPS:CCPG. Tables listing product HAP contents. 11 pp.
Date of Document May 12, 1998
II-D-887
May 12, 1998
II-D-888
May 27, 1998
II-D-889
May 29, 1998
II-D-890
June 1, 1998
II-D-891
June 1, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-892
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. B. Thomas, Bittner Industries, Inc., to R. Jemison, PES, Inc. Production and emission control information for the application of resin and gel coats at Bittner's Prichard, Alabama facility during the 1997 calendar year. 4 pp. C. Peterson, Xerxes Corporation, to J. Schweitzer, Composites Fabricators Association. Response to 5/27/98 faxed questions concerning certification or recertification of underground storage tanks. 1 p. Confidential business information located in CN-N801-15/ 98185-C18-06. 3 pp. A. DeCamp, Containment Solutions, Inc., to J. Schweitzer, Composites Fabricators Association. Response to request for costs of recertifying underground gasoline storage tanks. 1 p. Confidential business information located in CN-N801-15/ 98185-C18-06. 2 pp. J. Benz, Ershigs, Inc., to J. Schweitzer, Composites Fabricators Association. Response to request for information regarding certification costs of product lines. 1 p. Confidential business information located in CN-N801-15/ 98185-C18-06. 1 p. C. Fairer, III, Alabama Department of Environmental Management, to M. Strum, EPA:OAQPS:CCPG. Information on styrene emissions for Dixie-Pacific Manufacturing Company in Gadsden, Alabama facility. 2 pp.
Date of Document June 4, 1998
II-D-893
June 10, 1998
II-D-894
June 18, 1998
II-D-895
June 22, 1998
II-D-896
June 22, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-897
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. R. Yoho, Mesa Fiberglass, Inc., to S. McNally, Composites Fabricators Association. Discussion of flow coat experiences and costs. 1 p. Confidential business information located in CN-N801-15/ 98185-C18-06. 2 pp. Reichhold Chemicals, Inc., to M. Proctor, PES, Inc. CFA vapor suppressant effectiveness test worksheets. 6 pp. P. Margheim, Kemlite Company Inc., to M. Strum, EPA:OAQPS:CCPG. Emission and resin usage information in Kemlite's Joilet facility. 2 pp. J. Schweitzer, Composites Fabricators Assoc., to M. Strum, EPA:OAQPS:CCPG. Information on cost issues regarding lowering HAPs. 1 p. Confidential business information located at CN-N801-18-06/ 98185-C18-06. 6 pp. 1 diskette. J. Alanko, Arcteck Inc., to M. Strum, EPA:OAQPS:CCPG. Cost information for typical truck hood shell (80 sq. ft.). 1 p. D. Collins, United Panel, to M. Toomer, EPA:OAQPS:Docket. Response to operational survey for the facility in Mount Bethel, Pennsylvania. 1 p. Confidential business information located at CN-N801-17/ 98185-C18-01A. 7 pp.
Date of Document June 23, 1998
II-D-898
July 1, 1998
II-D-899
July 7, 1998
II-D-900
July 20, 1998
II-D-901
July 22, 1998
II-D-902
July 24, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-903
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. T. McQuarrie, Glasforms, Inc., to M. Proctor, PES, Inc. Information on the depths of baths at Glasform's Birmingham facility and the distance from the exit of the enclosure to the die as a percentage of the enclosure. 1 p. J. Schweitzer, Composites Fabricators Assoc., to L. Miles, Miles Fiberglass and Plastics, et. al. Information about small business panel meeting about evaluating impact of MACT on open molders which is scheduled for September 10 and 11, 1998 in Research Triangle Park, North Carolina. 1 p. R. Lertola, Marbelite Corp., to R. Jemison, PES, Inc. Material safety data sheets for the clear (G-1175) and two pigmented (G-2521 and G-8320) gel coats used in 1993. 10 pp. B. Dannhauer, Kalwall Corp., to K. Meardon, PES, Inc. Source test information concerning facility in Manchester, New Hampshire. 2 pp. Confidential Business Information is located at CN-N801-22/ 98185-C18. 4 pp. J. Schweitzer, Composites Fabricators Association., M. Strum, EPA:OAQPS:CCPG. Response to May 22, 1998 letter concerning the definition of the subcategory for manufacture of corrosionresistant products. 7 pp.
Date of Document July 28, 1998
II-D-904
August 4, 1998
II-D-905
August 6, 1998
II-D-906
August 14, 1998
II-D-907
August 18, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-908
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. J. Schweitzer, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Request for EPA review of draft "Feasibility assessment for MACT for Small Business Open-Molding Industry" for September 10-11, 1998 meeting in Durham, North Carolina. 5 pp. G. Begg, Resolite, Inc., to M. Toomer, EPA:OAQPS:Docket. Response to request for information on stack test report for the facility in Zelienople, Pennsylvania. 1 p. Confidential business information located at CN-N801-20/ 98185-C18-09. 13 pp. W. Dannhauer, Kalwall Corp., to K. Meardon, PES, Inc. Resin usage rates for the facility in Kalwall's Manchester, New Hampshire facility. 2 pp. P. Margherio, Kemlite Company Inc., to M. Strum, EPA:OAQPS:CCPG. Table showing 1998 resin and monomer usage rates for Kemlite's Jonesboro, Arkansas facility. 1 p. D. Boyd, Daniel P. Boyd and Associates, to K. Meardon, PES, Inc. Protocol used in a 1991 controlled lab study by Sequentia to determine volatile losses from resin usage. 5 pp. J. Schweitzer, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Summary of issues and agreed upon follow-up activities from the Small Business Open-Molding Industry meeting on September 10-11, 1998 in Durham, North Carolina. 2 pp.
Date of Document August 20, 1998
II-D-909
August 20, 1998
II-D-910
August 21, 1998
II-D-911
August 21, 1998
II-D-912
September 2, 1998
II-D-913
September 15, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-914
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. J. Spaulding, North End Composites, to M. Strum, EPA:OAQPS:CCPG. Follow-up comments on controlled spraying, tooling molds as part of corrosion definition, and MACT floor development from the Small Business OpenMolding Industry meeting on September 10-11, 1998 in Durham, North Carolina. 2 pp. D. DeSilvey, Werner Co., to M. Strum, EPA:OAQPS:CCPG. Comments on draft meeting summary dated August 17, 1998, from July 9, 1998 meeting between EPA, Werner Co., and the Composites Institute. 6 pp. L. Craigie, The Dow Chemical Company, to M. Strum, EPA:OAQPS:CCPG. “World’s Largest FGD Scrubbers Built With DERAKANE LSE Resins”. DERAKANE NEWS, The Dow Chemical Company. Vol. 17, Issue 2, August 1998. 2 pp. L. Craigie, The Dow Chemical Company, to M. Strum, EPA:OAQPS:CCPG. Results of tests for styrene emissions during and after winding. 3 pp. J. Schweitzer, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Letter transmitting “Controlled Spraying Handbook: Composites Open-Molding Spray Applications." September 1998. Composites Fabricators Association. 19 pp.
Date of Document September 15, 1998
II-D-915
September 18, 1998
II-D-916
September 23, 1998
II-D-917
September 29, 1998
II-D-918
September 30, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-919
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. L. Craigie, The Dow Chemical Company, to M. Strum, EPA:OAQPS:CCPG. Response to request to clarify codes in comparison of styrene emissions during and after winding, and analysis of filament winding emissions before and after winding. 1 p. R. Coleman, Micro-Fab, Inc., to R. Jemison, PES, Inc. Resin and gel coat usage and HAP content for 1997. 2 pp. B. Lacovara, Composites Fabricators Association, to EPA. CFA Phase I study hand lay-up emission profile data. 8 pp. B. Lacovara, Composites Fabricators Association, to EPA. CFA Phase I study spray lay-up emission profile data. 1 p. L. Craigie, The Dow Company, to M. Strum, EPA:OAQPS:CCPG. Discussion of issues concerning the use of vapor suppressed resins and secondary bonding, and resins used for secondary bonding. 1 p. J. Schweitzer, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Response to comments on concerns dealing with secondary bonding. 3 pp.
Date of Document October 1, 1998
II-D-920
October 1, 1998
II-D-921
October 6, 1998
II-D-922
October 6, 1998
II-D-923
October 6, 1998
II-D-924
October 6, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-925
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. M. Hollenbeck, Cook Composites and Polymers Co., (CCP), to S. McKee, PES, Inc. Comments on 10/7/98 telephone contact report on distribution and availability of CCP gel coats and request for information on tooling resins. 14 pp. R. Coleman, Micro-Fab, Inc., to R. Jemison, PES, Inc. Percentage of sprayup vs. hand layup and material safety data sheets. 9 pp. C. Studer, Spokane County Air Pollution Control Authority, to M. Strum, EPA:OAQPS:CCPG. Gel coat usage and potential-to-emit for Fiber-Tech and MSDS for white ISO gel coat. 3 pp. D. DeSilvey, Werner Co., to M. Strum, EPA:OAQPS:CCPG. Data on total duration the enclosure on wet area for pultrusion is open, suggested language for pultrusion WAE definition, and concern on economic impacts of monitoring time the WAE is open. September 18, 1998 letter. 3 pp. J. Lee, Palmer of Texas, to M. Strum, EPA:OAQPS:CCPG. Comments concerning low styrene resins and styrene suppressants. 2 pp. F. Ranson, The Phil Carter System Inc., to M. Strum, EPA:OAQPS:CCPG. Comments concerning low resin HAP gel coats and resins and controlled spraying and company literature. 6 pp.
Date of Document October 8, 1998
II-D-926
October 9, 1998
II-D-927
October 9, 1998
II-D-928
October 9, 1998
II-D-929
October 12, 1998
II-D-930
October 12, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-931
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. B. James, Enduro Composite Systems, Inc. to R. Jemison, PES, Inc. Information on 1996 and 1997 resin usage and styrene content and application processes at Freeport facility. 3 pp. M. Hood, Hood Manufacturing, Inc., to M. Strum, EPA:OAQPS:CCPG. Follow-up comments (specifying use of a specific resin or HAP content) to Small Business Open-Molding Industry meeting on September 10-11, 1998 in Durham, North Carolina. 2 pp. G. Multanen, FiberGlass Systems, Inc., to M. Strum, EPA:OAQPS:CCPG. Follow-up comments (reliance on supplier information, high HAP resin, controlled spray, and secondary bonding) to Small Business OpenMolding Industry meeting on September 10-11, 1998 in Durham, North Carolina. 4 pp. M. Hollenbeck, Cook Composites and Polymers Co., to M. Proctor, PES, Inc. List of prices for four resins with data sheeets and material safety data sheets. 62 pp. K. Kigweba, Ferro Corp., to M. Proctor, PES, Inc. Price, HAP content, and specific gravity for three tooling gelcoats. 1 p. P. Bennett, Jr., Molded Fiber Glass Companies (MFG), to M. Strum, EPA:OAQPS:CCPG, et. al. Summary discussion of MFG's efforts to use lower HAP resins at MFG/Union City, Pennsylvania and additional information recently gathered. 3 pp.
Date of Document October 19, 1998
II-D-932
October 19, 1998
II-D-933
October 20, 1998
II-D-934
November 3, 1998
II-D-935
November 3, 1998
II-D-936
November 5, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-937
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. P. Nissila, Neste Polyester America, to M. Proctor, PES, Inc. Gel coat HAP contents and costs. 4 pp. E. Dotson, BYK-Chemie USA, to S. McKee, PES, Inc. Price list for BYK-Chemie plastic additives and “Additive Guide for Unsaturated Polyester Resins.” 9 pp. J. Schweitzer, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Corrections to information and contacts of several companies in MACT database of "corrosion" facilities. 1 p. L. Craigie, The Dow Company to M. Strum, EPA:OAQPS:CCPG and R. Jemison, PES, Inc. Data tables containing the results of the filament winding experiments. 3 pp. B. Brody, Ashland Chemical Company, to S. McKee, PES, Inc. Arotool ®2001 and AME®5000 customer list and cost information on vapor suppressed vs. non-vapor suppressed resins. 2 pp. Confidential business information is located at CN-N823-2/ 99185-C18-02. 3 pp. J. Schweitzer, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Comments concerning MACT approach to fabrication of corrosionresistant components and the secondary bonding of these to primary structures. 31 pp.
Date of Document November 6, 1998
II-D-938
November 9, 1998
II-D-939
November 9, 1998
II-D-940
November 10, 1998
II-D-941
November 11, 1998
II-D-942
November 12, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-943
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. P. Bennett, Molded Fiber Glass Companies, to M. Strum, EPA:OAQPS:CCPG. Concerns with the emission limit proposal for new BMC sources and recommended alternative MACT proposal for new BMC sources. 3 pp. D. McClure, McClure Industries, Inc., to M. Strum, EPA:OAQPS:CCPG. Comments concerning point value system for open molding processes. 2 pp. D. DeBusk, Appalachian Plastics, Inc., to M. Strum, EPA:OAQPS:CCPG. Response to request for information on processes for facility in Glade Spring, Virginia. 34 pp. Confidential business information is located at CN-N823-1/ 99185-C18-01. 50 pp. D. DeBusk, Appalachian Plastics, Inc., to M. Toomer, EPA:OAQPS:Docket and M. Strum, EPA:OAQPS:CCPG. Declassified 1997 resin usage, HAP content, end product, and emission control information for the facility in Glade Spring, Virginia. 2 pp. Confidential business information is located at CN-N823-1/ 99185-C18-01. 50 pp. S. McNally, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Industry's recommendations regarding polymer casting, mixing and blending, and an approach to addressing HAP monomer based cleaning materials. 15 pp.
Date of Document November 17, 1998
II-D-944
November 19, 1998
II-D-945
November 20, 1998
II-D-946
November 20, 1998
II-D-947
December 15, 1998
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-948
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. S. McNally, Composites Fabricators Association, to M. Strum, EPA:OAQPS:CCPG. Training materials for the Controlled Spray Program. 100 pp. L. Craigie, The Dow Chemical Company, to R. Jemison, PES, Inc. Summary of results of filament winding emission study. 2 pp. B. Harris, Belding Tank Technologies, Inc., to R. Jemison, PES, Inc. Annual weighted HAP’s and relative usage rate. 1 p. G. McAllister, Aqua Bath, to S. McKee, PES, Inc. Information concerning use of Ortho resin to rigidize acrylic at the facility in Nashville, Tennessee. 5 pp. G. Meurer, Cincinnati Fiberglass, to M. Strum, EPA:OAQPS:CCPG. Information concerning MACT feasibility for open-molding styrene emissions. 6 pp. J. Watts, Oregon Reinforced Plastics Assn., Inc., to M. Strum, EPA:OAQPS:CCPG. Request for EPA to allow controlled spraying as one of the options to meet MACT. 1 p. J. Byars, Aqua Glass Corp., to M. Strum, EPA:OAQPS:CCPG. Discussion of EPA's approach to MACT for open molding and corrosion and concern over finding a profitable tooling gel coat replacement. 1 p.
Date of Document December 16, 1998
II-D-949
December 17, 1998
II-D-950
December 18, 1998
II-D-951
December 22, 1998
II-D-952
January 8, 1999
II-D-953
January 28, 1999
II-D-954
January 29, 1999
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-955
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. R. Moquist, Raven Industries, to M. Strum, EPA:OAQPS:CCPG. Estimated one time equipment change cost and annual material costs to add suppressants to their process to comply with the proposed regulation. 1 p. J. Kutzli, BathCraft Inc., to J. Meyer or T. Koman, EPA:OAQPS:CCPG. Evaluation of the feasibility of EPA's open molding and corrosion fabrication approach for their facility. 3 pp. T. Hedger, Magnum Industries, to M. Strum, EPA:OAQPS:CCPG. Information including proposed definitions of atomization and fluid impingement flo-coating, and the preliminary results of tests on the fluid impingement nozzle at their facility. 14 pp. R. Furley, Marble Creations, to R. Jemison, PES, Inc. Material safety data sheet for Polydyne Orange Tooling Gel Coat. 2 pp. N. Olsen, Xerxes Corp., to M. Proctor, PES, Inc. 1997 mixing vessel operation data for six Xerxes facilities. 4 pp. D. Lee, Environmental Protection Commission of Hillsborough County, to K. Barnett, EPA:OAQPS:OCG. Style Crest Products Inc., emissions test conducted in October 1998. 40 pp.
Date of Document January 29, 1999
II-D-956
February 5, 1999
II-D-957
February 10, 1999
II-D-958
February 16, 1999
II-D-959
February 23, 1999
II-D-960
July 26, 1999
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-961
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. R. Kinman, Fibercast Company to M. Strum, U.S. Environmental Protection Agency. Letter concerning information on Fibercast's operations and catalytic incinerator. 6 pp. H. North, LASCO Panel Products to M. Toomer, U.S. Environmental Protection Agency. Information collected during May 1997 source testing. 2 pp. J. Schweitzer, Composites Fabricators Association to Keith Barnett, U.S. Environmental Protection Agency. Request for EPA to modify the point value equation for nonatomized application. 4 pp. J. Schweitzer, Composites Fabricators Association to Keith Barnett, U.S. Environmental Protection Agency. Comments or 1999 draft data based and floors for open molding and corrosion. 9 pp. L. Denison, Core Materials Corporation to K. Barnett, U.S. Environmental Protection Agency. Letter concerning emission control for SMC compounding machine located at Columbus Ohio. 3 pp. T. Cowley, Composites Consulting to K. Barnett U.S. Envirnmental Protection Agency. Letter concerning proposed HAP content limits for corrosion-Resistant resins. 2 pp. K. Anderson, Monaco Coach Corporation to K. Barnett, U. S. Environmental Protection Agency. Comments on proposed Reinforced Fiberglass MACT rule. 4 pp.
Date of Document November 19, 1996
II-D-962
May 27, 1998
II-D-963
November 24, 1999
II-D-964
December 15, 1999
II-D-965
December 20, 1999
II-D-966
January 25, 2000
II-D-967
January 31, 2000
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-968
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. J. Shafer, CoverMaster, Inc. to K. Barnett, U. S. Environmental Protection Agency. Comments on proposed Reinforced Fiberglass MACT rule. 2 pp. G. McAllister, Aquabath, to K. Barnett, U. S. Environmental Protection Agency. Comments on proposed Reinforced Fiberglass MACT rule. 17 pp. K. Anderson, Monaco Coach Corporation to K. Barnett, U. S. Environmental Protection Agency. Information on Gelcoats. 1 pp. M. Motte, TPI Composites to K. Barnett, U. S. Environmental Protection Agency. Comments on proposed Reinforced Fiberglass MACT rule. 4 pp. S. McNally, CFA to K. Barnett, U. S. Environmental Protection Agency. Information on Closed Forming Pultrusion. 6 pp. S. McNally, CFA to K. Barnett, U. S. Environmental Protection Agency. Information on Polymer Casting. 32 pp. W. Pedersen, Shaw Pittman to Diane McConkey, U. S. Environmental Protection Agency. Discussion re: source category. 2 pp. J. Barker, Strongwell Co. to K. Barnett, U. S. Environmental Protection Agency. Information on Closed Forming Emissions. 1 pp. J. Schweitzer, Composites Fabricators Association to Keith Barnett, U.S. Environmental Protection Agency. Information on Non-atomized application of gel coat. 2 pp.
Date of Document February 3, 2000
II-D-969
February 4, 2000
II-D-970
February 9, 2000
II-D-971
February 9, 2000
II-D-972
May 4, 2000
II-D-973
May 4, 2000
II-D-974
May 5, 2000
II-D-975
May 15, 2000
II-D-976
June 2, 2000
Docket No. A-94-52 Subcategory II-D Correspondence Received From Persons Outside The Agency
Document Number II-D-977
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. J. Schweitzer, Composites Fabricators Association to Keith Barnett, U.S. Environmental Protection Agency. Comments on an off-ramp. 7 pp. J. Barker, Strongwell Co. to K. Barnett, U. S. Environmental Protection Agency. Comments on proposed Reinforced Fiberglass MACT rule. 2 pp.
Date of Document June 6, 2000
II-D-978
June 22, 2000
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons
Document No. II-E-1
Description G. LaFlam, PES, Inc., with M. Strum, EPA:OAQPS. April 2, 1993. Summary of meeting on March 23, 1993 with the EPA, PES, Inc., and SPI. Telecon. D. Carroll, PES, Inc., with D. Breidenbach, BYK - Chemie USA. May 25, 1993. Discussion about BYK - Chemie's S740 styrene suppressant. Telecon. D. Carroll, PES, Inc., with B. Daniel, EPA:AEERL. June 1, 1993. Regarding EPA's testing of the Polyad system for styrene removal. G. LaFlam and D. Carroll, PES, Inc., with M. Strum, EPA:OAQPS. June 15, 1993. Summary of meeting on, June 7, 1993, with representatives of the reinforced composites industry, EPA, and PES. Telecon. D. Carroll, PES, Inc., with L. Moore, Fibercast, Sand Springs, OK, facility. June 17, 1993. Regarding Fibercast's catalytic incinerator for styrene. G. LaFlam, PES with M. Strum, EPA:OAQPS. July 2, 1993. Action items of meeting on June 21, 1993 with representatives from the plastic composites industry, EPA, PES, Inc., EC/R, and TRC. Telecon. D. Carroll, PES, Inc., with M. Danielsson, Weatherly, Inc. July 12, 1993. Availability of test information on the Polyad adsorption control system. Telecon. D. Carroll, PES, Inc., with F. Cassis, Ashland Chemical. July 15, 1993. Discussion about regulations and emission reduction measures. Telecon. D. Carroll, PES, Inc., with J. Davenport, LASCO. August 23, 1993. Regarding LASCO's incinerator at the Lancaster, TX, facility.
II-E-2
II-E-3
II-E-4
II-E-5
II-E-6
II-E-7
II-E-8
II-E-9
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document No. II-E-10 Description Telecon. D. Carroll, PES, Inc., with D. Jones, M. Welcher, M. Quinn, and S. Pe, LASCO. August 27 and September 7, 1993. Discussions concerning LASCO's incinerator at the South Boston, VA, facility. Telecon. D. Carroll, PES, Inc., with K. Ziernicky, Structural North America. September 22, 1993. Regarding types of resins used in production operations. Telecon. D. Carroll, PES, Inc., with J. Fowler, Battenfeld. September 22, 1993. Prices of resin transfer molding equipment. Telecon. D. Carroll, PES, Inc., with M. Keegan, RTM Systems (GlasCraft). September 27, 1993. Information about RTM Systems molds, prices of molds, and processes molds are used in. G. LaFlam and G. Pagett, PES, Inc., with M. Strum, EPA:OAQPS. October 7, 1993. Summary of meeting on September 13, 1993 with the EPA, PES, Inc., SPI, and the Pultrusion industry. Telecon. D. Carroll, PES, Inc., with D. Rollen, Glas/Steel Ind. Laminates. October 21, 1993. Regarding possible proprietary control technique at Glas/Steel listed on the survey response. Telecon. G. Pagett, PES, Inc., with R. DeGraff, R.D. Werner Company, Inc. October 25, 1993. Regarding the proprietary styrene fume collection system referred to in the screening survey. Telecon. M. Strum, EPA:OAQPS, with A. Munters, Ahlquist & Munters Technologies, Inc. October 31 and November 4, 1994. Regarding biofiltration technology to control styrene emissions. Telecon. M. Strum, EPA:OAQPS, with R. Leitzman, Cytec Industries, Perrysburg, OH, facility. February 6, 1995. Regarding source reduction techniques. Telecon. M. Strum, EPA:OAQPS, with C. Stainer, International Paper, Decorative Products Division. February 16, 1995. Questions about the control of styrene emissions. M. Strum, EPA:QAQPS, with Reinforced Composite Plastics Docket No. A-94-52. February 23, 1995. Summary of meeting on February 7, 1995 with EPA, PES, Inc., and RTI.
II-E-11
II-E-12 II-E-13
II-E-14
II-E-15
II-E-16
II-E-17
II-E-18
II-E-19
II-E-20
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document No. II-E-21 Description K. Meardon and G. LaFlam, PES, Inc., with M. Strum, EPA:OAQPS. June 28, 1995. Summary of Vendor Pre-MACT teleconference on May 24, 1995. Telecon. W. Dunston and M. Strum, EPA:OAQPS, with J. Hermance and R. Millett, Alliant Techsystems. July 31, 1995. Clarification of survey response and collection of additional information about the use of the incinerator. Telecon. W. Dunston and M. Strum, EPA:OAQPS, with R. Wells, Spaulding Composites Company. August 1, 1995. Clarification of survey response and collection of additional information about the use of the incinerator.
II-E-22
II-E-23
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document No. II-E-24 Description Telecon. W. Dunston and M. Strum, EPA:OAQPS, with B. Kinman, Fibercast. August 4, 1995. Questions about Fibercast's centrifugal casting process and its control. Telecon. W. Dunston and M. Strum, EPA:OAQPS, with R. Greenwood, Iten Industries. August 4, 1995. Clarification of survey response and collection of additional information about the use of the incinerator. G. LaFlam and M. Proctor, PES, Inc., with M. Strum, EPA:OAQPS. August 4, 1995. Summary of meeting on July 25, 1995 with EPA, PES, Inc., SPI, and pultrusion industry representatives. G. LaFlam, PES, Inc., with M. Strum, EPA:OAQPS. August 25, 1995. Summary of Pre-MACT team teleconference on July 31, 1995.
II-E-25
II-E-26
II-E-27
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons
Document Number II-E-28
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. Telecon. W. Dunston and M. Strum, EPA:OAQPS:CCPG, with I. Pe, Jr., LASCO Bathware. Telephone contact report dated July 26, 1995 concerning the oxidizer usage at LASCO Bathware facilities. 2 pp. Telecon. W. Dunston and M. Strum, EPA:OAQPS:CCPG, with J. Prior, J. Smart and M. Smith, Crane Cor Tec Co. Conference call on process, emissions and control information. 16 pp. Telecon. W. Dunston and M. Strum, EPA:OAQPS:CCPG, with D. Winegar, The Duriron Co., Inc. Telephone contact report from August 9, 1995 concerning request for additional information about Duriron’s oxidizer. 4 pp. Telecon. W. Dunston and M. Strum, EPA:OAQPS:CCPG, with P. Margherio, Crane Kemlite, (formerly BP Chemicals, Inc.). Telephone contact report concerning test data and incinerator capture efficiency. 1 p. Telecon. W. Dunston and M. Strum, EPA:OAQPS:CCPG, with P. Young, Jr., Leer East, Inc. Telephone contact report clarifying that the facility mistakenly reported use of carbon filters in their survey response. 1 p. M. Strum, EPA:OAQPS:CCPG, to pre-MACT team members. Meeting minutes, briefing package, and list of core issues from the September 27, 1995 preMACT meeting in Durham, North Carolina. 27 pp.
Date of Document July 26, 1995
II-E-29
August 22, 1995
II-E-30
August 29, 1995
II-E-31
September 5, 1995
II-E-32
October 10, 1995
II-E-33
October 13, 1995
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-34 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. W. Dunston, EPA:OAQPS:CCPG, with C. Stanier, International Paper, (formerly Nevamar Decorative Surfaces Corp.). Telephone contact report concerning discussion of International Paper’s facility. 8 pp. Telecon. M. Strum, EPA:OAQPS:CCPG, with R. Miller, Ohio EPA/Canton. Telephone contact report concerning emission reduction measures at U.S. Fiberglass Products, Inc. 1 p. Telecon. M. Strum, EPA:OAQPS:CCPG, with R. Roller, Commonwealth of Pennsylvania. Telephone contact report concerning the 1993/4 emissions test data for Creative Pultrusions, Inc., in Alum Bank, Pennsylvania. 1 p. Telecon. G. LaFlam and M. Proctor, PES, Inc., and M. Strum, EPA:OAQPS:CCPG, with M. Smith and J. Prior, Crane Cor Tec. Telephone contact report concerning the manufacturing processes for use in assignment into subcategories for Washington Court House, Ohio, facility. 1 p. Telecon. M. Proctor, PES, Inc., with J. Tracy, Venus Gusmer. Telephone contact report concerning costs to convert a Venus Gusmer spray gun to a flow coater. 1 p. G. LaFlam and K. Meardon, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from March 12, 1996 meeting in Durham, North Carolina, between EPA and representatives of the SMC Environmental subcommittee of the Composites Institute. 7 pp. Date of Document November 21, 1995
II-E-35
November 28, 1995
II-E-36
January 22, 1996
II-E-37
March 11, 1996
II-E-38
March 18, 1996
II-E-39
March 29, 1996
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-40 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. G. LaFlam and K. Meardon, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from March 20, 1996 teleconference with pre-MACT team on MACT floors and related issues. 5 pp. G. LaFlam and K. Meardon, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes of April 26, 1996 meeting in Durham, North Carolina, between the EPA and representatives of the Pultrusion Industry Council, (PIC) Technical Committee. 14 pp. G. LaFlam, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from April 26, 1996 meeting in Durham, North Carolina, between the EPA and Composites Institute. 18 pp. G. LaFlam, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from July 29, 1996 meeting in Durham, North Carolina, between EPA and representatives of the Plastic Composites Industry. 9 pp. G. LaFlam, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from June 13, 1996 meeting in Durham, North Carolina, between EPA and representatives of the Continuous Lamination Industry. 8 pp. G. LaFlam, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from July 2, 1996 meeting in Durham, North Carolina, between EPA and the Composites Fabricators Assoc., (CFA). 7 pp. Date of Document April 29, 1996
II-E-41
May 24, 1996
II-E-42
May 24, 1996
II-E-43
August 13, 1996
II-E-44
August 14, 1996
II-E-45
August 14, 1996
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-46 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Strum, EPA:OAQPS:CCPG, with M. Campbell, CR/PL Limited Partnership, (formerly Newartesian Limited Partnership). Telephone contact reports from August 14 and 19, 1996 confirming information in the screening survey from 1993 and three material safety data sheets; one for solvent blend and two for unsaturated polyester resin. 4 pp. G. LaFlam and M. Proctor, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from August 19, 1995 meeting in Durham, North Carolina, between EPA and representatives of the Kemlite Co. 10 pp. Telecon. K. Meardon, PES, Inc., with G. Rodgers, United Panel Inc. Telephone contact report confirming that the facility uses a continuous lamination process. 1 p. G. LaFlam, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from July 29, 1996 meeting in Durham, North Carolina, between EPA and representatives of the Pultrusion Industry Council, (PIC). 19 pp. K. Meardon, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from September 16, 1996 meeting in Durham, North Carolina, on SMC and BMC mixing and cleaning operations. 10 pp. G. LaFlam, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from September 16, 1996 meeting in Durham, North Carolina, on HAP abatement systems for plastic composite operations. 51 pp. Date of Document August 19, 1996
II-E-47
September 24, 1996
II-E-48
October 1, 1996
II-E-49
October 2, 1996
II-E-50
October 4, 1996
II-E-51
October 24, 1996
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-52 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Proctor, PES, Inc., with M. Short, Cameo Marble. Telephone contact report verifying the content of HAP in the resins used by Cameo Marble and three material safety data sheets for polylite resin (unsaturated polyester resin). 5 pp. Telecon. M. Proctor, PES, Inc., with C. Van Liew, Bristol Fiberlite Industries. Telephone contact report verifying the content of HAP in resins used by Bristol Fiberlite Industries and two material safety data sheets for unsaturated polyester resin. 3 pp. Telecon. M. Proctor, PES, Inc., with T. Haskins, Emsig Manufacturing Corp. Telephone contact report verifying that Emsig Manufacturing Corp., is not a major source. 1 p. Telecon. M. Strum, EPA:OAQPS:CCPG, K. Meardon and M. Proctor, PES, Inc., with C. Van Liew, Bristol Fiberlite Industries. Telephone contact reports from October 31, 1996 and December 3, 1996 verifying the HAP content in the resins used by Bristol Fiberlite. 2 pp. Telecon. L. Herring, EPA:OAQPS:CCPG, to G. Rodgers, United Panel Inc. Telephone contact reports from October 1, 1996 and November 12, 1996 discussions with K. Meardon, PES, Inc. 3 pp. Confidential Business Information located in CN-504-04/97185-C18-01. 1 diskette and 5 pp. Telecon. M. Proctor, PES, Inc., with R. Hoffman, Interplastics Corp. Telephone contact report verifying the resin content of HAP reported on a material safety data sheet. 1 p. Date of Document October 30, 1996
II-E-53
October 31, 1996
II-E-54
November 6, 1996
II-E-55
December 3, 1996
II-E-56
December 4, 1996
II-E-57
December 5, 1996
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-58 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Strum, EPA:OAQPS:CCPG, with D. Prior, Ashland Chemical Co. Telephone contact report concerning two resins manufactured by Ashland Chemical Co., that are used in the manufacture of skylights. 3 pp. Telecon. M. Proctor, PES, Inc., with T. Haskins, Emsig Manufacturing Corp. Telephone contact report concerning an error on Emsig Manufacturing Corp.’s November 6, 1996 contact summary. 1 p. Telecon. M. Strum, EPA:OAQPS:CCPG, K. Meardon and M. Proctor, PES, Inc., with C. Stanier and K. Dellario, International Paper, (formerly Nevamar Decorative Surfaces Corp.) Telephone contact reports from July 12, 1997 clarifying whether the Fountainhead continuous line might fit into the surface category of paper coating, and one from August 9, 1996 clarifying three issues concerning the continuous line process used at Odenton, Maryland, facility. 9 pp. Telecon. M. Proctor, PES, Inc., with D. Zint, Indian Industries. Telephone contact report clarifying information provided in Indian Industries’ 1993 EPA screening survey. 1 p. Telecon. K. Meardon, PES, Inc., with P. Epes, United Technologies Motor Systems. Telephone contact report concerning the gel coating process used by United Technologies Motor Systems. 1 p. Telecon. M. Proctor, PES, Inc., with R. Kunz, The Larson Co. Telephone contact report clarifying information provided in the Larson Co.’s 1993 EPA screening survey. 1 p. Date of Document December 10, 1996
II-E-59
January 7, 1997
II-E-60
January 31, 1997
II-E-61
February 26, 1997
II-E-62
February 26, 1997
II-E-63
February 26, 1997
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-64 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. V. Everette, PES, Inc., with M. Wilcox, G&W Plastics. Telephone contact report clarifying information provided in G&W Plastics’ 1993 EPA screening survey. 1 p. Telecon. K. Meardon, PES, Inc., with S. Holder, Ryobi Motor Products Corp. Telephone contact report answering three process related questions. 1 p. Telecon. M. Proctor, PES, Inc., with M. Skrypek, Innotech Industries, Inc. Telephone contact report clarifying information provided in the 1993 EPA screening survey. 1 p. Date of Document March 5, 1997
II-E-65
March 13, 1997
II-E-66
March 17, 1997
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons
Document Number II-E-67
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. Telecon. M. Strum, EPA:OAQPS:CCPG, G. LaFlam and M. Proctor, PES, Inc., with M. Smith and J. Prior, Cor Tec. Telephone contact report clarifying the manufacturing processes for subcategorization for the facility in Court House, Ohio. 1 p. Telecon. G. LaFlam, PES, Inc., with B. Cavanaugh, Magnum Industries. Telephone contact report providing cost data for converting from spray guns to flow coaters. 1 p. Telecon. G. LaFlam, PES, Inc., with R. Kovacs, Bailey Transportation Products. Telephone contact report with follow-up questions to the Composites Institute’s March 1996 survey for the facility in Conneaut, Ohio. 1 p. Telecon. G. LaFlam, PES, Inc., with V. Shah, The Budd Company. Telephone contact report with follow-up questions to the Composites Institute’s March 1996 survey for the facility in Van Wert, Ohio. 1 p. Telecon. G. LaFlam, PES, Inc., with G. Zeltner, Cambridge Industries. Telephone contact report with follow-up questions to the Composites Institute’s March 1996 survey for the facility in Marion, Indiana. 1 p.
Date of Document March 11, 1996/ April 1, 1997
II-E-68
March 11, 1996
II-E-69
April 10, 1996
II-E-70
April 10, 1996
II-E-71
April 10, 1996
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-72 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. G. LaFlam, PES, Inc., with D. McCrady, Eagle-Picher. Telephone contact report with follow-up questions to the Composites Institute’s March 1996 survey for the facility in Grabill, Indiana. 1 p. Telecon. G. LaFlam, PES, Inc., with R. Wiler, Haysite Reinforced Plastic. Telephone contact report with follow-up questions to the Composites Institute’s March 1996 survey for the facility in Erie, Pennsylvania. 1 p. Telecon. M. Strum, EPA:OAQPS:CCPG, with B. Kirby, Tecton Products. Telephone contact report to determine appropriate flow rate for estimating cost of abatement for pultrusion operation for the facility in Fargo, North Dakota. 1 p. Confidential business information located at CN-N404-2/ 96185-C18-02. 3 pp. Telecon. G. LaFlam, PES, Inc., with F. Cassis, Industry Consultant (FAC Assoc.) Telephone contact report concerning limits on monomer contents of corrosion-resistant and fireretardant resins. 1 p. G. LaFlam, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from September 26, 1996 meeting in Durham, North Carolina, between EPA and representatives of the Corrosion-Resistant Industry. 7 pp. Date of Document April 10, 1996
II-E-73
April 11, 1996
II-E-74
April 12, 1996/ April 16, 1996
II-E-75
June 24, 1996
II-E-76
October 21, 1996
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-77 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. G. Rodgers, United Panel Inc., with K. Meardon, PES, Inc. Telephone contact report verifying resin processes for the facility in Clearwater, Florida. 2 pp. Confidential business information is located at CN-504-4. 1 p. 1 diskette. Telecon. G. LaFlam, PES, Inc., with K. Bass, Glasforms, Inc. Telephone contact report clarifying the response to the 1993 EPA survey for the facility in San Jose, California. 1 p. Telecon. M. Proctor, PES, Inc., with T. Jones, Prestigious Accessories. Telephone contact report verifying content of HAP in the resin reported in the 1993 EPA survey. 1 p. Telecon. M. Proctor, PES, Inc., with J. Manning, Rynone Manufacturing Corp. Telephone contact report collecting additional information about closed mixers at the facility in Sayre, Pennsylvania. 2 pp. Telecon. G. LaFlam, PES, Inc., with J. Price, Shakespeare Composites and Electronics. Telephone contact report verifying resins used in fabrication processes for the facility in Newberry, South Carolina. 1 p. Telecon. G. LaFlam and M. Proctor, PES, Inc., with J. Price, Shakespeare Composites and Electronics. Telephone contact report verifying resin information and mixer operations for the facility in Newberry, South Carolina. 1 p. Date of Document October 24, 1996
II-E-78
October 30, 1996
II-E-79
October 30, 1996
II-E-80
October 30, 1996
II-E-81
October 30, 1996
II-E-82
October 30, 1996/ April 2, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-83 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. G. LaFlam, PES, Inc., with D. Evans, Creative Pultrusions, Inc. Telephone contact report requesting information on the resin mixing and pultrusion lines at the facilities in Alum Bank, Pennsylvania and Roswell, New Mexico. 1 p. Telecon. G. LaFlam, PES, Inc., with G. Benker, Diamond Fiberglass Fabricators. Telephone contact report clarifying information on the internal mix systems reported in the 1993 EPA survey for the facility in Victoria, Texas. 1 p. Telecon. G. LaFlam, PES, Inc., with R. DeGraff, Werner Company. Telephone contact report verifying information regarding resin storage, mixing, and pultrusion for the facility in Franklin Park, Illinois. 1 p. Telecon. G. LaFlam and M. Proctor, PES, Inc., with R. DeGraff, Werner Company. Telephone contact report clarifying information about mixing for the facility in Franklin Park, Illinois. 4 pp. Telecon. M. Proctor, PES, Inc., with C. Wicks, Eagle Craft, Inc. Telephone contact report providing resin HAP content information and material safety data sheet for the facility in Plymouth, Indiana. 3 pp. Telecon. G. LaFlam, PES, Inc., with C. DeBusk, Appalachian Plastics, Inc. Telephone contact report clarifying the resins used in filament winding and open-molding operations for the facility in Glade Spring, Virginia. 1 p. Date of Document November 4, 1996
II-E-84
November 4, 1996
II-E-85
November 4, 1996
II-E-86
November 4, 1996/ April 6, 1998
II-E-87
November 5, 1996
II-E-88
November 6, 1996
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-89 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. G. LaFlam and M. Proctor, PES, Inc., with C. DeBusk, Appalachian Plastics, Inc. Telephone contact report clarifying filament winding and open-molding operations and ventilation of mixing vessels for the facility in Glade Spring, Virginia. 1 p. Telecon. G. LaFlam, PES, Inc., with G. Nicholson, Viatec/Process Storage Systems. Telephone contact report discussing mixing operations for the facility in Belding, Michigan. 1 p. Telecon. G. LaFlam, PES, Inc., with W. Wells, Rubber & Plastic Applicators, Inc. Telephone contact report discussing mixing operations at the facility in Mobile, Alabama. 1 p. Telecon. T. Ziegler, American Acrylic Corp., with M. Proctor, PES, Inc. Telephone contact report discussing sheet molding compound production at the facility in West Babylon, New York. 1 p. Telecon. G. LaFlam, PES, Inc., with B. Taylor, Taylor Industries, Inc. Telephone contact report verifying resin information for the polymer casting and gel coating processes for the facility in Parkerford, Pennsylvania. 1 p. Telecon. G. LaFlam, PES, Inc., with G. Erickson, Space Tables, Inc. Telephone contact report discussing spray lay up and gel coating processes conducted at the facility in Minneapolis, Minnesota. 1 p. Date of Document November 6, 1996/ April 6, 1998
II-E-90
November 6, 1996
II-E-91
November 12, 1996
II-E-92
March 4, 1997
II-E-93
April 1, 1997
II-E-94
April 3, 1997
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-95 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. V. Everette, PES, Inc., with L. Brandt, Radiant, Marble Co. Telephone contact report documenting information on resin HAP content, cleaning, and mixing for cultured marble production and a 1992 material safety data sheet for the resin used at the facility in Deerfield Beach, Florida. 4 pp. Telecon. M. Proctor, PES, Inc., with K. Langham, Austin Countertops, Inc. Telephone contact report verifying the resin HAP content information in the 1993 EPA survey for the facility in Austin, Texas. 3 pp. M. Proctor, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from May 9, 1997 meeting in Durham, North Carolina between the EPA and representatives of the Reinforced Plastic Composites Industry. 14 pp. M. Strum, EPA:OAQPS:CCPG, to K. Meardon and M. Proctor, PES, Inc. Summary of telephone conversation with R. Mullinex, Great Dane, concerning the selling of the composites operation to Fiber Pro, Inc., in White Pidgeon, Michigan. 1 p. M. Strum, EPA:OAQPS:CCPG, to M. Proctor, PES, Inc. Summary of telephone conversation with F. Echanique, State of Florida Department of Environmental Protection confirming that Classic Motor Carriages is out of business. 1 p. Date of Document April 23, 1997
II-E-96
June 18, 1997
II-E-97
June 24, 1997
II-E-98
July 8, 1997
II-E-99
July 11, 1997
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-100 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Proctor, PES, Inc., with D. Matthis, Artesian Plumbing Products (Newartesian Management Co.). Telephone contact report confirming the shut down of the facility in Covington, Tennessee. 1 p. Telecon. M. Proctor, PES, Inc., with J. Kutzli, Bathcraft Inc. Telephone contact report verifying the gel coat HAP content information reported in the 1993 EPA survey. 1 p. Telecon. R. Jemison, PES, Inc., with B. Strycker, Ultra/Glas of Lakeville, Inc. Telephone contact report clarifying information provided in the 1997 gel coat information collection request. 1 p. M. Proctor, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Summary of telephone conversation with a receptionist for the old Jones & Hunt phone number indicating that Jones & Hunt had burned down. 1 p. Telecon. R. Jemison, PES, Inc., with Venkatachalam, Core Materials Corporation (CMC). Telephone contact report describing in-mold coating process for the facility in Columbus, Ohio. 1 p. Telecon. R. Jemison, PES, Inc., with B. Morganstern, Livingston, Inc. Telephone contact report updating information from the 1993 EPA survey for the facility in Auburn, Washington. 1 p. Date of Document July 31, 1997
II-E-101
July 31, 1997
II-E-102
August 25, 1997
II-E-103
August 28, 1997
II-E-104
September 2, 1997
II-E-105
October 22, 1997
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-106 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. M. Proctor, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from August 19, 1997 meeting in Durham, North Carolina between EPA and representatives of the Reinforced Plastic Composites Industry. 19 pp. B. Goldberg, Washington State Department of Ecology, to M. Strum, EPA:OAQPS:CCPG. Summary of telephone conversation with Gordon Lowe, LASCO Bathware Inc., discussing resin and gel coat HAP content for the facility in Yelm, Washington. 1 p. M. Proctor, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from October 27, 1997 meeting in Durham, North Carolina between EPA and representatives of the Pultrusion Industry Council. 9 pp. Telecon. M. Proctor, PES, Inc., with A. Kaeding, CDR Systems Corp. Telephone contact report discussing information contained in the database on CDR Systems Corp. for the facilities in Florida, California, and Oklahoma. 3 pp. Telecon. M. Proctor, PES, Inc., with J. Spang, Krueger International, Inc. Telephone contact report updating information from the 1993 EPA survey for the facility in Gillett, Wisconsin. 3 pp. Date of Document October 23, 1997
II-E-107
November 5, 1997
II-E-108
November 12, 1997
II-E-109
November 20, 1997
II-E-110
November 20, 1997
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-111 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. R. Jemison, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from September 18, 1997 meeting in Durham, North Carolina between EPA and Representatives of the Reinforced Plastics/Composites Industry. 512 pp. Telecon. R. Jemison, PES, Inc., with R. Yoho, Mesa Fiberglass, Inc. Telephone contact report updating information concerning the 1993 EPA survey for the facility in Commerce City, Colorado. 1 p. Telecon. M. Proctor, PES, Inc., with D. Walters, Leer East, Inc. Telephone contact report verifying information reported in the 1993 EPA survey for the facility in Milton, Pennsylvania. 2 pp. Telecon. R. Jemison, PES, Inc., with R. Watkins, Fibrex Corp. Telephone contact report updating information concerning the 1993 EPA survey for the facility in Burlington, Washington. 1 p. Telecon. R. Jemison, PES, Inc., with E. Miller, Millennium Products, Inc. Telephone contact report updating information concerning the 1993 EPA survey for the facility in Elkhart, Indiana. 1 p. Telecon. R. Jemison, PES, Inc., with R. Fisher, Contemporary Products, Inc. Telephone contact report updating information concerning the 1993 EPA survey for the facility in Menomonee Falls, Wisconsin. 1 p. Date of Document November 21, 1997
II-E-112
November 24, 1997
II-E-113
November 26, 1997
II-E-114
December 2, 1997
II-E-115
December 16, 1997
II-E-116
December 23, 1997
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-117 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. R. Jemison, PES, Inc., with P. Glashauser, Hasbrouck Plastics, Inc. Telephone contact report updating information concerning the 1993 EPA survey for the facility in Lake View, New York. 1 p. R. Jemison, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from December 8, 1997 meeting in Durham, North Carolina between EPA and representatives of the Reinforced Plastics/Composites Industry. 154 pp. 1 diskette. Telecon. M. Proctor, PES, Inc., with R. Miller, Ohio EPA/Canton City Health Department. Telephone contact report concerning carbon filter system at U.S. Fiberglass Products, Inc. facility in Middlebranch, Ohio. 2 pp. Telecon. R. Jemison, PES, Inc., with M. Carlton, American Technology & Research Industries, Inc. Telephone contact report updating information concerning the 1993 EPA survey for the facility in Ocala, Florida. 1 p. Telecon. R. Jemison, PES, Inc., with K. Feichtinger, Balteck Corp. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Northvale, New Jersey. 2 pp. Telecon. R. Jemison, PES, Inc., with Z. Kline, Zane’s Fiberglass Shop, Inc. Telephone contact report updating information concerning the 1993 EPA survey for the facility in Scranton, North Dakota. 1 p. Date of Document December 30, 1997
II-E-118
January 5, 1998
II-E-119
January 5, 1998
II-E-120
January 9, 1998
II-E-121
January 9, 1998
II-E-122
January 9, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-123 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. R. Jemison, PES, Inc., with S. Brackins, GL&V LaValley Industries, Inc. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Vancouver, Washington. 2 pp. Telecon. R. Jemison, PES, Inc., with S. Brackins, GL&V LaValley Industries, Inc. Telephone contact report updating information concerning 1993 EPA survey for the facility in Vancouver, Washington. 2 pp. Telecon. R. Jemison, PES, Inc., with M. Arthur, An-Cor Industrial Plastics, Inc. Telephone contact report updating information provided in the 1993 EPA survey for the facility in North Tonawanda, New York. 1 p. Telecon. R. Jemison, PES, Inc., with R. Thomas, Bittner Industries, Inc. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Prichard, Alabama. 1 p. Telecon. R. Jemison, PES, Inc., with H. Segars, Fibrenetics, Inc. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Woodbridge, New Jersey. 1 p. Telecon. R. Jemison, PES, Inc., with R. Coleman, Micro-Fab, Inc. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Theodore, Alabama. 1 p. Date of Document January 12, 1998
II-E-124
January 20, 1998
II-E-125
January 23, 1998
II-E-126
January 27, 1998
II-E-127
January 27, 1998
II-E-128
January 27, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-129 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. R. Jemison, PES, Inc., with S. Ratcliffe, Shenandoah Fiberglass Products Company. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Front Royal, Virginia. 2 pp. Telecon. R. Jemison, PES, Inc., with J. McCloskey, Composites USA, Inc. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Bear, Delaware. 1 p. Telecon. M. Proctor, PES, Inc., with R. Iannelli and B. Jackson, Water Heater Innovations, Inc. Telephone contact report updating information concerning the 1993 EPA survey for the facility in Eagan, Minnesota. 1 p. R. Jemison, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from January 5, 1998, meeting in Durham, North Carolina between EPA and representatives of the Reinforced Plastic/Composites Industry. 35 pp. Telecon. R. Jemison, PES, Inc., with J. Price, Shakespeare Electronics & Fiberglass Division. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Newberry, South Carolina. 1 p. Telecon. R. Jemison, PES, Inc., with P. Crystler, Belding Tank Technology. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Greenville, Michigan. 1 p. Date of Document January 28, 1998
II-E-130
January 29, 1998
II-E-131
February 2, 1998
II-E-132
March 6, 1998
II-E-133
March 24, 1998
II-E-134
March 25, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-135 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Proctor, PES, Inc., with C. Edwards, Altec Industries, Inc. Telephone contact report verifying information provided in the 1993 EPA survey for the facility in St. Joseph, Missouri. 1 p. Telecon. M. Proctor, PES, Inc., with J. Cheek, Conley Corp. Telephone contact report verifying information provided in the 1993 EPA survey for the facility in Tulsa, Oklahoma. 2 pp. Telecon. R. Jemison, PES, Inc., with J. Benz, Ershigs, Inc. Telephone contact report verifying information provided in the 1993 EPA survey for the facilities in Wilson, North Carolina and Bellingham, Washington. 4 pp. Telecon. R. Jemison, PES, Inc., with B. McMorris, Western Recreational Vehicles, Inc. Telephone contact report updating information concerning the 1993 EPA survey for the facility in Yakima, Washington. 1 p. Telecon. M. Proctor, PES, Inc., with K. Ziernicki, Structural North America. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Chandon, Ohio. 2 pp. Telecon. R. Jemison, PES, Inc., with P. Brown, Ershigs, Inc. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Biloxi, Mississippi. 1 p. Date of Document March 26, 1998
II-E-136
March 26, 1998
II-E-137
March 26, 1998
II-E-138
March 26, 1998
II-E-139
March 27, 1998
II-E-140
March 30, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-141 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. R. Jemison, PES, Inc., with M. Birgitta, William Kreysler & Associates, Inc. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Petaluma, California. 1 p. Telecon. M. Proctor and R. Jemison, PES, Inc., with D. Evans, Creative Pultrusions, Inc. Telephone contact report clarifying the emission control measures used at the facility in Alum Bank, Pennsylvania. 2 pp. Telecon. R. Jemison, PES, Inc., with S. Kavanaugh, Bowie Manufacturing, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Lake City, Iowa. 1 p. Telecon. R. Jemison, PES, Inc., with J. Sill, Marble Products Company. Telephone contact report updating the information in the 1993 EPA survey for the facility in Wichita, Kansas. 1 p. Telecon. R. Jemison, PES, Inc., with J. Griffiths, Fiber Pro, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Brazil, Indiana. 1 p. Telecon. R. Jemison, PES, Inc., with L. Miles, Miles Fiberglass & Plastics, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Oregon City, Oregon. 3 pp. Date of Document March 30, 1998
II-E-142
April 2, 1998
II-E-143
April 3, 1998
II-E-144
April 3, 1998
II-E-145
April 7, 1998
II-E-146
April 7, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-147 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Proctor, PES, Inc., with K. Doeden, Raven Industries. Telephone contact report verifying information concerning centrifugal casting reported in the 1993 EPA survey. 3 pp. Telecon. M. Proctor, PES, Inc., with K. Voigt, Xerxes Corp. Telephone contact report verifying the information provided in the 1993 EPA survey for the centrifugal casting process conducted at the facility in Anaheim, California. 3 pp. Telecon. M. Proctor, PES, Inc., with K. O’Day, Cambridge Industries, Inc. Telephone contact report verifying that the facility in Jackson, Ohio uses closed/covered mixing vessels. 2 pp. Telecon. R. Jemison, PES, Inc., with B. Rieck, Sunrise Fiberglass Corp. Telephone contact report updating the information in the 1993 EPA survey for the facility in Wyoming, Minnesota. 2 pp. M. Proctor, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from August 17, 1998 meeting in Durham, North Carolina between EPA and representatives of the Pultrusion Industry Council. 16 pp. Telecon. R. Jemison, PES, Inc., with G. Miller, GHM, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Orwigsburg, Pennsylvania. 2 pp. Date of Document April 8, 1998
II-E-148
April 13, 1998
II-E-149
April 16, 1998
II-E-150
April 21, 1998
II-E-151
May 6, 1998
II-E-152
May 11, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-153 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. R. Jemison, PES, Inc., with C. Nelson, FG Products, Inc. Telephone contact report clarifying the information in the 1993 EPA survey for the facility in Rice Lake, Wisconsin. 3 pp. Telecon. K. Meardon, PES, Inc., with P. Hennessy, W.H. Brady Company. Telephone contact report clarifying the information in the 1993 EPA survey for the facility in Milwaukee, Wisconsin. 2 pp. Telecon. R. Jemison, PES, Inc., with V. Shah, The Budd Company. Telephone contact report concerning the use of nitrogen blanketing. 2 pp. Telecon. R. Jemison, PES, Inc., with A. Jones, Athena Marble, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Salisbury, North Carolina. 1 p. Telecon. R. Jemison, PES, Inc., with R. Farley, Marble Creations, Inc (formerly Foreman Industries, Inc.). Telephone contact report updating the information in the 1993 EPA survey for the facility in Warsaw, Indiana. 2 pp. Telecon. R. Jemison, PES, Inc., with S. Barthuly, Laminated Products, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Kenosha, Wisconsin. 1 p. Date of Document May 13, 1998
II-E-154
May 29, 1998
II-E-155
June 1, 1998/ June 24, 1998 June 10, 1998
II-E-156
II-E-157
June 10, 1998
II-E-158
June 11, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-159 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. C. Hester, PES, Inc., with J. Griffiths, FiberPro, Inc. Telephone contact report collecting cost information for switching to lower HAP resins. 1 p. Telecon. R. Jemison, PES, Inc., with T. Eber, Oxford CMP, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Oxford, Mississippi. 3 pp. Telecon. C. Hester, PES, Inc., with S. Kavanaugh, Bowie Manufacturing, Inc. Telephone contact report collecting information for switching to lower HAP resins. 1 p. Telecon. R. Jemison, PES, Inc., with R. Yoho, Mesa Fiberglass, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Commerce City, Colorado. 2 pp. Telecon. R. Jemison, PES, Inc., with E. Miller, Millennium Products, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Elkhart, Indiana. 4 pp. Telecon. R. Jemison, PES, Inc., with M. Smith, Crane Cor Tec, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Washington Court House, Ohio. 2 pp. Date of Document June 18, 1998
II-E-160
June 18, 1998
II-E-161
June 24, 1998
II-E-162
June 24, 1998
II-E-163
June 26, 1998
II-E-164
June 29, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-165 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Proctor, PES, Inc., with S. Scharfenberg, Dixie-Pacific Manufacturing Company, Inc. Telephone contact report verifying the information provided by the Alabama Department of Environmental Management. 1 p. Telecon. B. Palmer, Eastern Research Group, Inc. (ERG, Inc.), with J. Mason and O. Maxwell, Regulator Marine. Telephone contact report collecting information on costs associated with switching to lower emitting resin and gel coat application equipment and lower HAP materials. 2 pp. Telecon. R. Jemison, PES, Inc., with J. Roley, Warminster Fiberglass Company, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facilities in Jacksonville, Texas and Southampton, Pennsylvania. 1 p. Telecon. R. Jemison, PES, Inc., with D. Cronin, Lehigh Cultured Marble, Inc. Telephone contact report providing updated information and material safety data sheets for the facility in Maoungie, Pennsylvania. 7 pp. Telecon. M. Proctor, PES, Inc., with R. DeGraff and D. Helman, Werner Company. Telephone contact report concerning covering of mixing vessels for the facility in Franklin Park, Illinois. 2 pp. Date of Document July 2, 1998
II-E-166
July 6, 1998/ July 13, 1998/ July 14, 1998
II-E-167
July 7, 1998
II-E-168
July 8, 1998
II-E-169
July 16, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-170 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Proctor, PES, Inc., with T. Haskins, Emsig Manufacturing Corp. Telephone contact report concerning the placement of Emsig Manufacturing Corp.’s processes in the EPA’s plastic composites maximum achievable control technology database. 2 pp. T. Manners, EPA:OAQPS:CCPG, to Project File. Meeting materials for March 30 to April 1, 1998 1998 Small Business Ombudsman/Small Business Assistance Program National Conference between EPA, state agencies, organizations, and representatives of the Reinforced Plastic/Composites Industry, in Scottsdale, Arizona. 24 pp. Telecon. M. Proctor and S. McKee, PES, Inc., with S. Scharfenberg, Dixie-Pacific Manufacturing Company, Inc. Telephone contact report collecting information on costs incurred by changing resin in the manufacturing process. 1 p. Telecon. S. McKee, PES, Inc., with S. Radcliffe, Shenandoah Fiberglass Products Company. Telephone contact report collecting information on costs incurred by changing resin in manufacturing process. 1 p. Date of Document July 20, 1998
II-E-171
July 20, 1998
II-E-172
July 29, 1998
II-E-173
July 30, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-174 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Strum, EPA:OAQPS:CCPG, M. Proctor, C. Hester, and S. McKee, PES, Inc., with P. Bennett, Molded Fiber Glass Companies (MFG). Telephone contact report discussing MFG’s emission reduction techniques at the facility in Union City, Pennsylvania. 3 pp. Confidential business information is located at CN-N801-18-06/ 98185-C18-06. 2 pp. 1 diskette. Telecon. R. Jemison, PES, Inc., with S. Brackins, GL&V LaValley Industries, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Vancouver, Washington. 2 pp. Telecon. S. McKee, PES, Inc., with R. Thomas, Bittner Industries, Inc. Telephone contact report collecting information on the costs incurred due to testing of resin with lower HAP content. 1 p. Telecon. S. McKee, PES, Inc., with H. Segars, Fibrenetics, Inc. Telephone contact report collecting information on costs associated with HAP emission reduction techniques, for the facility in Woodbridge, New Jersey. 2 pp. Telecon. R. Jemison, PES, Inc., with R. Matthis, CR/PL Limited Partnership (Crane Plumbing). Telephone contact report updating the information in the 1993 EPA survey for the facility in Mansfield, Ohio. 2 pp. Date of Document July 31, 1998
II-E-175
August 3, 1998
II-E-176
August 4, 1998
II-E-177
August 4, 1998
II-E-178
August 6, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-179 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. R. Jemison, PES, Inc., with R. Lertola, Marbelite Corp. Telephone contact report updating the information in the 1993 EPA survey for the facility in Novi, Michigan. 2 pp. Telecon. R. Jemison, PES, Inc., with R. Maurer, Century Marble, Inc. Telephone contact report updating information in the 1993 EPA survey for the facility in Indianapolis, Indiana. 2 pp. M. Proctor, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from July 9, 1998 meeting in Durham, North Carolina between EPA and representatives of Werner Company. 14 pp. Telecon. R. Jemison, PES, Inc., with R. Wilson, Wilson Marble, Inc. Telephone contact report updating the information in the 1993 EPA survey for the facility in Marion, North Carolina. 1 p. Telecon. S. McKee, PES, Inc., with G. Miller, GHM, Inc. Telephone contact report collecting indirect cost data associated with switching to non-atomized production equipment. 1 p. Telecon. S. McKee, PES, Inc., with T. Jones, Prestigious Accessories, Inc. Telephone contact report collecting cost data on HAP emission reduction techniques. 2 pp. Telecon. S. McKee, PES, Inc., with S. Brackins, GL&V LaValley Industries, Inc. Telephone contact report collecting information concerning costs of changing resins. 1 p. Date of Document August 6, 1998
II-E-180
August 17, 1998/ August 18, 1998
II-E-181
August 17, 1998
II-E-182
August 19, 1998
II-E-183
August 20, 1998
II-E-184
August 24, 1998
II-E-185
August 27, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-186 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. S. McKee, PES, Inc., with K. Mullin, LASCO Bathware. Telephone contact report collecting cost data on HAP emission reduction techniques. 2 pp. K. Meardon, PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from August 4, 1998 meeting in Durham, North Carolina between EPA and representatives of Kemlite Company Inc. 1 p. Confidential business information located at CN-N801-21/ 98185-C18. 9 pp. 1 diskette. Date of Document September 2, 1998
II-E-187
September 16, 1998
II-E-188
Telecon. M. Strum, EPA:OAQPS:CCPG, with September 22, 1998 T. Cowley, The Dow Chemical Company. Telephone contact report collecting information on the development of the vapor suppressed resin test method and a case history information sheet provided by Dow on DeRAKANE Epoxy Vinyl Ester Resins. 3 pp. Telecon. M. Strum, EPA:OAQPS:CCPG, with B. Duvall, Aker Plastics. Telephone contact report collecting information concerning HAP content of the resins used at the facility in Martinsburg, West Virginia, and the two facilities in Plymouth, Indiana. 2 pp. Telecon. M. Strum, EPA:OAQPS:CCPG, M. Proctor and R. Jemison, PES, Inc., with L. Burroughs, Hydro Systems, Inc. Telephone contact report collecting information concerning production processes and the control system at the facility in Simi Valley, California. 3 pp. September 24, 1998
II-E-189
II-E-190
October 6, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-191 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Strum, EPA:OAQPS:CCPG; M. Proctor and S. McKee, PES, Inc., with M. Hollenbeck, Cook Composites and Polymers (CCP). Telephone contact report gathering information on distribution and availability of gel coats and to request information on tooling resins. 3 pp. Telecon. S. McKee, PES, Inc., with T. McQuarrie, Glasforms, Inc. Telephone contact report collecting information concerning costs of mixer covers for the facility in Birmingham, Alabama. 1 p. Telecon. S. McKee, PES, Inc., with J. Spaulding, North End Composites, Inc. Telephone contact report clarifying a statement made at the September 11, 1998 Small Business Open-Molding Outreach Meeting for the Reinforced Plastics MACT Standard regarding the recommendation of gel coats made by Cook Composites and Polymers (CCP). 1 p. PES, Inc., to M. Strum, EPA:OAQPS:CCPG. Meeting minutes from September 11, 1998 meeting in Durham, North Carolina between EPA and representatives of the Small Business Open-Molding Industry. 43 pp. Date of Document October 7, 1998
II-E-192
October 9, 1998/ October 16, 1998
II-E-193
October 12, 1998
II-E-194
October 13, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-195 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. K. Meardon, PES, Inc., with C. Novak, Kemlite-Sequentia. Telephone contact report to confirm accuracy of cost information from the July 11, 1996 site visit for the four enclosures built at the facility in Grand Junction, Tennessee. 1 p. Telecon. S. McKee, PES, Inc., with P. McDonald, Reichhold Chemicals, Inc. Telephone contact report collecting cost information concerning vapor suppressed and non-vapor suppressed resins. 2 pp. Telecon. S. McKee, PES, Inc., with C. Richey, A.R.E., Inc. Telephone contact report follow-up to update information on tooling resins for mold-making at their facilities in Mount Eaton and Massillion, Ohio. (Material safety data sheet also included). 11 pp. Telecon. R. Jemison, PES, Inc., with J. McCloskey, Composites USA, Inc. Telephone contact report to follow-up with information provided in the 1993 EPA survey. 3 pp. Telecon. R. Jemison, PES, Inc., with N. Farestveit, Pacific Tank, LTD. Telephone contact report updating information provided in the 1993 EPA survey for the facility in Adelanto, California. 3 pp. Date of Document October 27, 1998
II-E-196
October 30, 1998
II-E-197
November 12, 1998/ December 9, 1998
II-E-198
November 20, 1998
II-E-199
November 20, 1998
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-200 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Telecon. M. Strum, EPA:OAQPS:CCPG, with D. DeSilvey, The Werner Company. Telephone contact report discussing information provided in an October 9, 1998 letter concerning the amount of time for operators to track and monitor the amount of time the enclosure would be open during an eight hour shift. 1 p. Telecon. M. Strum, EPA:OAQPS:CCPG, with A. DeBusk, Appalachian Plastic, Inc. Telephone contact report clarifying the confidential business information contained in the notebook submitted to EPA on November 20, 1998. 4 pp. Confidential business information is located at CN-N823-2/ 99185C18-02 93/58. 2 pp. Telecon. S. McKee, PES, Inc., with T. Jones, Prestigious Accessories, Inc. Telephone contact report concerning usage of tooling resins for mold-making. 2 pp. Telecon. M. Proctor, PES, Inc., with K. Long, F.E. Meyers Company. Telephone contact report documenting that the facility in Ashland, Ohio, discontinued their reinforced plastics operations. 2 pp. Telecon. M. Proctor, PES, Inc., with a sales agent, Worth Chemical Corporation. Telephone contact report discussing the price of acetone and methylene chloride. 1 p. Date of Document November 25, 1998
II-E-201
December 1, 1998
II-E-202
December 15, 1998
II-E-203
January 13, 1999
II-E-204
August 17, 1999
Docket No. A-94-52 Subcategory II-E EPA Memoranda of Meetings with Outside Persons and of Telephone Conversations with Outside Persons Document Number II-E-205 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Reinforced Plastic Composites Pollution Prevention Focus Group Meeting. Organics Control Branch; Air & Energy Engr. Research Lab.; EPA Minutes of December 15, 1999 Mtg. Between EPA and Representatives of the Reinforced Plastic/Composites Industry. Minutes of April 13, 2000 Mtg. Between EPA and Representatives of the Reinforced Plastic/Composites Industry. Memo from Diane McConkey re: mtg. with composites fabricators Assoc. Reps to discuss legal issues relating to reinforced plastics MACT. Telephone report of K. Barnett’s call to Mr. James Stone of Durr Environmental, Inc. Telephone report of K. Barnett’s call to Mr. John Waterman of Molded Fiber Glass Co. Telephone report of K. Barnett’s call to Ms. Tiffany Fitchley of Core Materials Corp. Date of Document September 13, 1993
II-E-206
January 18, 2000
II-E-207
April 25, 2000
II-E-208
June 16, 2000
II-E-209 II-E-210 II-E-211
June 26, 2000 July 3, 2000 July 3, 2000
Docket No. A-94-52 Subcategory II-F Interagency Review Materials Document Number II-F-1 Date Rcvd in Docket Commenter, Addressee, Title or Description, etc. Memo from Kim Teal, EPA/ESD to Keith Barnett, EPA.ESD regarding plastic parts definition question. National Emission Standards for Hazardous Air Pollutants: Reinforced Plastics Composites proposed rulemaking package sent to OMB for review National Emission Standards for Hazardous Air Pollutants: Reinforced Plastics Composites proposed rulemaking package edited pages sent to OMB OMB 83-I Form and Supporting Statement Response to Peter Eglington e-mail of 11/06/2000 concerning letter from the Composites Fabricators Association. E-mail to Peter Eglington, Office of Management and Budget regarding OSHA comments on the proposed Reinforced Plastic Composites MACT. Teleconference with OMB to discuss edits on proposed rulemaking package with OMB comments and EPA responses attached. Small Business Administration comments submitted as part of OMB review Teleconference with OMB to discuss edits on proposed rulemaking package with OMB comments and EPA responses to comments attached Date of Document July 18, 2000
II-F-2
October 5, 2000
II-F-3
October 13, 2000
II-F-4 II-F-5
October 25, 2000 November 7, 2000
II-F-6
November 9, 2001
II-F-7
December 11, 2000
II-F-8
January 16, 2001
II-F-9
January 30, 2001
Docket No. A-94-52 Subcategory II-F Interagency Review Materials Document Number II-F-10 Date Rcvd in Docket Commenter, Addressee, Title or Description, etc. EPA response to comments received from the Department of Defense through OMB on the proposed reinforced Plastic Composites MACT. SBA comments received through OMB on the proposed Reinforced Plastic Composites MACT. Additional SBA comments received as part of OMB review on the proposed Reinforced Plastic Composites MACT. Redline strikeout version of regulation and preamble showing all changes made as a result of OMB review Date of Document February 22, 2001
II-F-11
March 6, 2001
II-F-12
March 8, 2001
II-F-13
April 18, 2000
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere
Document No. II-I-1
Description M. Duffy, Ashland Chemical Company. Styrene Emissions: How Effective Are Suppressed Polyester Resins? Presented at the 34th Annual Technical Conference of the Reinforced Plastics/Composites Institute of the Society of the Plastics Industry, Incorporated. 1979. R. Dillner, Creative Pultrusions, Inc., Applications for Pultruded Products. Undated. M. Rogozen, Control Techniques for Organic Gas Emissions from Fiberglass Impregnation and Fabrication Processes, ARB/R-82/165, California Air Resources Board, Sacramento, California. June 1982. M. Elsherif, Staff Report, Proposed Rule 1162 - Polyester Resin Operations, South Coast Air Quality Management District. Rule Development Division, El Monte, California. January 23, 1987. Bay Area Air Quality Management District. Regulation 8 Organic Compounds, Rule 50 Polyester Resin Operations. December 5, 1990. A. Säämänen et al., Emission of Styrene During Hand Lay-Up Molding of Reinforced Polyester, Applied Occupational Environmental Hygiene 6 (9). September 1991. T. Jonas, Prepregs, Modern Plastics, 68 (11): pp: 200-201. MidOctober 1991. SPI Composites Institute, Introduction to Composites Reference Handbook. 1992. Ventura County Air Pollution Control District. Rule 74.14 Polyester Resin Material Operations. Revised May 26, 1992. M. Adkins et al., Ashland Chemical Company. The Determination of Styrene Emissions During the Hand Lay-Up and Spray-Up Processes. Presented at the 48th Annual Conference of the Reinforced Plastics/Composites Institute of the Society of the Plastics Industry, Incorporated. February 8-11, 1993. San Diego Air Pollution Control District. Regulation IV, Rule 67.12 Polyester Resin Operations. Revised April 6, 1993.
II-I-2 II-I-3
II-I-4
II-I-5 II-I-6
II-I-7 II-I-8 II-I-9 II-I-10
II-I-11
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document No. II-I-12 II-I-13 II-I-14 Description Pultrusion Industry Council, SPI Composites Institute, PIC Emissions Study Report. May 5, 1993. Styrene emission test report, Creative Pultrusions, Inc., Pennsylvania Department of Environmental Resources. May 19, 1993. Policy Statement on Reducing Air Emissions from Open Molding Composites Fabrication. Composites Fabricators Association. September 1993. Puget Sound Air Pollution Control Agency. Regulation II, Section 3.08 Polyester, Vinylester, Gelcoat, and Resin Operations. Revised December 9, 1993. Illinois Organic Material Emission Standards, Title 35 Subtitle B, Part 218 Organic Material Emission Standards and Limitations for the Chicago Area. Revised March 3, 1994. South Coast Air Quality Management District. Rule 1162 Polyester Resin Operations. Amended May 13, 1994. The Society of the Plastics Industry, Inc., Facts & Figures of the U.S. Plastics Industry. September 1994. D. Kelley et al., Reduction of Styrene Emissions for Filament Winding Operations. The Dow Chemical Company, Freeport, TX. 1995. R. Hillis and D. Davis, Waste Reduction Strategies for Fiberglass Fabricators. Office of Waste Reduction, North Carolina Department of Environment, Health, and Natural Resources. 1995. G.R. Hovan, GLS Corporation. The Epoxy Alternative. Composites Fabrication. February 1995. A.J. de Koning, DSM Resins BV, Zwolle, The Netherlands. 'Insert' Resins; A Break-through in the Reduction of Styrene Emission During Open-mold Processing. April 1995. DSM Halves Styrene Emissions with Insert. Reinforced Plastics June 1995. Volume 39, Number 6. ISSN 0034-3617. Maryland State Air Laws, COMAR 26.11.19.XX Control of VOC Emissions from Reinforced Plastic Manufacturing. Draft. July 13, 1995.
II-I-15
II-I-16
II-I-17 II-I-18 II-I-19 II-I-20
II-I-21 II-I-22
II-I-23 II-I-24
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document No. II-I-25 II-I-26 Description Open-molded Thermoset Composites are Replaced. Reinforced Plastics newsletter. Volume XIX, Number 16. August 7, 1995. C. Randazzo, “This is another year of good news”. Reinforced Plastics newsletter. Volume XIX, Number 19. September 18, 1995.
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere
Document Number II-I-27 II-I-28
Date Rcvd in Docket
Commentor, Addressee, Title or Description, etc. Part 70, Operating Permit for Aqua Bath Co., Inc., in Nashville, Tennessee. 17 pp. Pilot Scale Rotary Concentrator Test Results for Styrene Abatement. Durr Industries, Inc. Test Site: Navistar International Transport Corp., in Columbus, Ohio. 30 pp. Permit to Operate (#19424) for Composite Technology in Fort Worth, Texas. 9 pp. Transfer Efficiency and VOC Emissions of Spray Gun and Coating Technologies in Wood Finishing. Battelle Pacific Northwest Laboratories. Prepared for Pacific Northwest Pollution Prevention Research Center, (PPRC) in Seattle, Washington. 18 pp. Reducing Styrene Emissions in Fiber Reinforced Plastic Operations. The Minnesota Office of Waste Management in Minneapolis, Minnesota. 12 pp. Emissions Compliance Tests Styrene and Visible Emissions: Fiberglass Reinforced Plastic Lay-up Facility, Idaho Permit to Construct 860-0035. GEA Dynamic Fabricators, Rathdrum Idaho. R. Richards, Bison Engineering, Inc. 171 pp. Demonstration of Capture and Control Efficiency for a Styrene Emission Source. A. Patkar and J. Reinhold, Radian Corp., and G. Henderson, IT Corp. Presented at the 87th Annual Meeting & Exhibition in Cincinnati, Ohio. 9 pp.
Date of Document No Date No Date
II-I-29 II-I-30
November 5, 1991 1992
II-I-31
March 1993
II-I-32
October 1, 1993
II-I-33
June 19, 1994
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-34 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Transmittal of source test review reports for two tests conducted at Aqua Glass in Klamath Falls, Oregon, in October 1994 and March 1995, acompanying test protocol for the two tests, and approved letter of test plan for October 1994 test. 58 pp. Cast Polymers Capture Sophisticated Markets. D. Dawson, Composites Technology. 5 pp. Results of emission tests and calculations for W.H. Brady in Milwaukee, Wisconsin. Transmitted to M. Bahner, Research Triangle Institute, by J. Jackson, W.H. Brady Co. 32 pp. Permit to Operate (M93001) and an Air Quality Effects Analysis for Marvin Windows (Tecton Products) in Fargo, North Dakota. 112 pp. Phase I-Baseline Study: Hand Lay-Up, Gel Coat, Spray-Up, Final Report. R. Lacovara, et. al., Composites Fabricators Assoc., (CFA), and L. Craigie, T. Cowley, P. Wykowski and G. Webster, The Dow Chemical Co. 298 pp. Process description and process flow diagram for Fiber Tech Industries, Inc., Spokane, Washington. 3 pp. Notice of Draft Air Permit Issuance, Styrene Source Stack Test Results for the LASCO Bathware Facility in Yelm, Washington and OAPCA review of the LASCO stack test report. 7 pp. Reviewed Permit to Operate, Permit to Construct, and Air Pollution Control Air Quality Effects Analysis for Tecton Products in Fargo, North Dakota. 27 pp. Date of Document July 11, 1995
II-I-35 II-I-36
September/ October 1995 November 17, 1995
II-I-37
April 12, 1996
II-I-38
September 1996
II-I-39
November 6, 1996
II-I-40
January 31, 1997
II-I-41
February 27, 1997
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-42 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. The Year of the Non-Spray Application. B. Lacovara, Composites Fabricators Assoc., (CFA). Composites Fabrication. 2 pp. Date of Document March 1997
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-43 II-I-44 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Industry Challenge. S. McNally. Composites Fabrication. 1 p. Atlac® and Dion® - Corrosion Resin Selection and Design Guide. Reichhold. 42 pp. Control technology information for Premix, Inc., facility in Ashtabula, Ohio. 1 p. Confidential business information located in CN-308-21/ 94185-C18-03. 9 pp. Application for Permit to Operate for A.R.E., facility in Canton, Ohio. 1 p. Confidential business information located in CN-N404-1/ 96-185-C18-01 EPA-3103. 9 pp. Exhaust Emission Sampling Thermo-Oxidizer Efficiency Testing, Composite Technology, Inc., Ft. Worth, Texas. Armstrong Environmental, Inc. 62 pp. Incinerator Efficiency Sampling, Fibercast Company, Sand Springs, Oklahoma. April 10, 1992. Armstrong Environmental, Inc. 49 pp. Nevamar Corporation United States Patent 5,183,600. Method and Apparatus for Continuous Casting of Polymerizable Material. 12 pp. Results of the July 15, 1993 Total Hydrocarbon DRE Test on the Thermal Oxidizer at the Tecton Products Plant in Fargo, North Dakota. Interpoll Laboratories, Inc. 7 pp. Date of Document No Date No Date
II-I-45
No Date
II-I-46
March 11, 1981
II-I-47
July 3, 1991
II-I-48
April 15, 1992
II-I-49
February 2, 1993
II-I-50
July 29, 1993
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-51 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Application for Air Pollution Control Operation Permit. Brady USA, Inc., Cameron Avenue facility in Milwaukee, Wisconsin. 60 pp. Nevamar Corporation. United States Patent 5,260,006. Method and Apparatus for Continuous Casting of Polymerizable Thermosetting Material. 14 pp. G. C. Rodgers. United States Patent 5,372,493. Continuous Casting Apparatus Using Two Moving Belts. 8 pp. Application for Permit to Operate the Crane Kemlite Company Inc. facility, in Channahon, Illinois. 93 pp. Application for Permit to Operate the Oasis Industries, Inc., facility in Batavia, Illinois. 75 pp. Application for a Joint Construction and Operating Permit to Install Polyurethane Foam Injection Equipment at the Applied Composites, Corp., facility in St. Charles, Illinois. 103 pp. Modification to Permit to Install No. 03-9078 and Permit to Install No. 03-9078 (Issued December 20, 1995) for The Budd Company facility in North Baltimore, Ohio. 26 pp. Application for Permit to Operate the Bulk Molding Compounds, Inc., facility in St. Charles, Illinois. 76 pp. Application for Permit to Install Molding Press #24 for The Budd Company facility in North Baltimore, Ohio. 13 pp. Date of Document October 1993
II-I-52
November 9, 1993
II-I-53
December 13, 1994
II-I-54
November 30, 1995
II-I-55
December 4, 1995
II-I-56
December 5, 1995
II-I-57
January 31, 1996
II-I-58
March 7, 1996
II-I-59
June 20, 1996
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-60 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Facility Inspection Report AQ-16 for Ershigs Inc., facility in Wilson, North Carolina. 4 pp. Ashland Chemical Resin News. Prepared by Ashland Chemical Co., Columbus, Ohio. 4 pp. E. Fuller, State of North Carolina Department of Environment, Health and Natural Resources (DEHNR), to T. Ohler, Kidron, Inc. Letter indicating that the Hackney Brothers, Inc., facility in Wilson, North Carolina has ceased all operations and that Air Permit No. 2632R5 is hereby inactivated. 1 p. Air Pollution Control Operation Permit (No. 241270810-P01) for Brady U.S.A., Cameron Avenue facility in Milwaukee, Wisconsin. Attachment: (1) June 26, 1996 Inspection Report, and (2) August 27, 1996 "Analysis, Preliminary Determination, and Draft Permit." 32 pp. Authority to Construct, Permit No. C-246-1-1, for CDR Systems Corp., facility in Corcoran, CA. 2 pp. Injection Die Pultrusion: Closed System, Wide Open Technology. Composites Technology. pp. 19, 20, 25-27. 5 pp. Gel Coats-Not Just a Pretty Face. Composites Technology. pp. 14-18. 5 pp. Date of Document October 24, 1996
II-I-61
January 1997
II-I-62
February 11, 1997
II-I-63
March 12, 1997
II-I-64
May 20, 1997
II-I-65
July/August 1997
II-I-66
July/August 1997
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-67 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Baseline Characterization of Emissions from Fiberglass Boat Manufacturing. Prepared for: National Marine Manufacturers Assoc., (NMMA). Prepared by: Stelling Engineering, P.A., Durham, NC. 86 pp. Faster, Cleaner, Stronger: A Resin and Gel Coat Development Update. J. McDermott. Composites Fabrication. pp. 9, 10, 12, 14. 4 pp. Reichhold Corrosion and FR News - Atlac and Dion. Volume 3. 8 pp. Reduced Cost, Higher Performance RTM. Reinforced Plastics. pp. 48-49. 2 pp. Untitled. p. 47. Reinforced Plastics. Destruction Efficiency Report, American Standard, Salem, Ohio. Optimal Technologies, Inc. 69 pp. Information pertaining to West Virginia Office of Air Quality Permit R13-2006 for Aker Plastics. 18 pp. Cambridge Industries Acquires Livingston Molded Products. Composites Technology. p. 10 1 p. Permit to Operate No. 0016 for Hydro Systems Inc., facility in Simi Valley, California. 20 pp. How Low is “Low Styrene” Resin? S. McNally. Composites Fabrication. pp. 26-28. 3 pp. Date of Document August 1997
II-I-68
August 1997
II-I-69 II-I-70 II-I-71 II-I-72
September 1997 October 1997 October 1997 October 10, 1997
II-I-73
November 21, 1997
II-I-74
March/April 1998
II-I-75 II-I-76
May 12, 1998 June 1998
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-77 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. MACT-A Brief Chronology (Part 1). J. Schweitzer. Composites Fabrication. pp. 34-35. 2 pp. Reducing Emissions with Styrene Suppressants. B. Lacovara. Composites Fabrication. pp. 35, 36, 42. 3 pp. Strategies for Low Styrene Resins. B. Strong. Composites Fabrication. pp. 20-23, 38. 5 pp. The Why and How of Reducing Styrene Emissions. J. Schweitzer. Composites Fabrications. pp. 12-15. 4 pp. American Standard Inc.’s Ohio EPA Permits to Install and Permit to Operate. 30 pp. The Indiana Fiber Reinforced Plastic Consortium Department of Commerce Grant: Brief Summary. Attachments: (1) FPR Consortium Styrene Reduction Initiative Applied to the Entire Indiana FRP Industry; (2) "Optimum" (Fiber Reinforced Plastics Consortuim Newsletter), June 1998, Vol. 1, No. 1; and (3) "Optimum," August 1998, Vol. 1, No. 2. 11 pp. Air Pollution Control Permit Application for Custom Fiberglass Molding, Inc. facility, in Weyauwega, Wisconsin. 123 pp. Date of Document June 1998
II-I-78
June 1998
II-I-79
June 1998
II-I-80
June 1998
II-I-81 II-I-82
June 3, 1998 August 24, 1998
II-I-83
August 25, 1998
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-84 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. The Rauch Guide to the U.S. Plastics Industry. Rauch Associates. Bridgewater, NJ: Rauch Associates, Inc. 1991. Predicasts Basebook. Foster City, CA: Information Access Corporation. November 1992. Modern Plastics. Resin Supply: What’s in the Pipeline for ‘93? January 1993. Facts and Figures of the U.S. Plastics Industry. Society of the Plastics Industry, Inc. (SPI). Washington, DC: SPI. 1994. Modern Plastics. Resin Supply: Plotting a Course for Global Supply. January 1994. The Reinforced Plastics Handbook. John Murphy. Oxford, UK: Elsevier Advanced Technology. 1994. Introduction to Composites. Society of the Plastics Industry (SPI) Composites Institute. Third Edition. Washington, DC: Society of the Plastics Industry, Inc. 1995. Carbon Fibers Adjusting to Changes. Brent Shearer. Chemical Marketing Reporter. April 15, 1996. Manufacturing USA. Gale Research, Inc. Detroit, MI: Gale Research, Inc. 1996. 1991 Date of Document
II-I-85
November 1992
II-I-86
January 1993
II-I-87
1994
II-I-88
January 1994
II-I-89
1994
II-I-90
1995
II-I-91
April 15, 1996
II-I-92
1996
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-93 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Size Standards by SIC Industry. U.S. Small Business Administration. . 1996. State of the Industry: 1995-96. Karen F. Lindsay. Composites Design and Application. February 1996. Composite Materials: Properties, Nondestructive Testing and Repair. Mel Schwartz. Upper Saddle River, NJ: Prentice Hall. 1997. Minerals Yearbook: Clays. U.S. Geological Survey. [online] . 1997. Obtained January 21, 2000. Minerals Yearbook: Mica. U.S. Geological Survey. [online] . 1997. Obtained January 21, 2000. Standard and Poor’s Corporations [computer file]. Dialog Information Service. Palo Alto, CA: Dialog Information Service. 1997. Business & Company ProFile [computer file]. Information Access Corporation. Foster City, CA: Information Access Corporation. 1998. Dun’s Market Identifiers [computer file]. Dun & Bradstreet. New York, NY: Dialog Corporation. 1998. 1996 Date of Document
II-I-94
1996
II-I-95
1997
II-I-96
1997
II-I-97
1997
II-I-98
1997
II-I-99
1998
II-I-100
1998
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-101 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Facts and Figures of the U.S. Plastics Industry. Society of the Plastics Industry, Inc. (SPI). Washington, DC: SPI. 1998. Industry Norms & Key Business Ratios, DeskTop Edition 1996-97. Dun & Bradstreet. Murray Hill, NJ: Dun & Bradstreet. 1998. Thermoplastic Resins. Lars Berglund. Handbook of Composites, S.T. Peters, ed. New York: Chapman and Hall. 1998. Ward’s Business Directory of U.S. Private and Public Companies. Gale Research, Inc. Detroit, MI: Gale Research, Inc. 1998. Worldscope [computer file]. Disclosure Incorporated. Bethesda, MD: Disclosure Inc. 1998. American Business Disc [computer file]. American Business Information (ABI). 1999. Million Dollar Directory: America’s Leading Public and Private Companies. Dun & Bradstreet. Bethlehem, PA: Dun & Bradstreet Corporation. 1999. Plastics News. Resin Pricing. Updated May 13, 1999. Http://www.plasticsnews.com Industry Composites Demand for 1999-2000. Composite Fabricators Association (CFA). Http://www.cfa-hq.org. 1998 Date of Document
II-I-102
1998
II-I-103
1998
II-I-104
1998
II-I-105
1998
II-I-106
1999
II-I-107
1999
II-I-108
May 17, 1999
II-I-109
July 29, 2000
Docket No. A-94-52 Subcategory II-I References Not Readily Available to the Public Elsewhere Document Number II-I-110 Date Rcvd in Docket Commentor, Addressee, Title or Description, etc. Producer Price Index-Commodities: WPUSOP9200, Intermediate Materials less food and energy. 1990-2000. U.S. Bureau of Labor Statistics. Http://www.bls.gov Waste Reduction: Strategies for Fiberglass Fabricators. David R. Hillis, ECU, Dept. of Industrial Tech. and A. Darryl Davis, ECU, Dept. of Industry and Tech. Evaluation of Source Reduction Methods Through Modeling of Batch Production Processes In the Coatings and Composite Plastics Industries. Emerging Solutions to VOC and Air Toxics Control Proceedings of Specialty Conference, AWMA. Pultrusion Industry Council Phase II Emission Study Report. 1996 Society of the Plastics Industry, Inc. Energy Reference Handbook. Thomas Sullivan, Second Edition. Online Magnum Industries; Get Fit, Fluid Impingement Technology. 1999 Reinforced Plastic Industry Award. Http://www.magnumindustries.com/ index.htm Date of Document January 20, 2000
II-I-111
1995
II-I-112
1996
II-I-113
February 5, 1996
II-I-114
1997
II-I-115
August 4, 2000
Docket No. A-94-52 Subcategory II-J Small Business Outreach Materials and SBREFA Materials Document Number II-J-1 Date Rcvd in Docket Commenter, Addressee, Title or Description, etc. Date of Document July 20, 1998
Memo regarding Small Business Ombudsman/Small Business Assistance Program - National Conference Presentation Regarding 10-surface coating MACTs. Minutes of September 11, 1998 Small Business Open Molding Outreach Meeting. Letter from Jeff Gaskell, Trail Wagons, Inc. to Keith Barnett, EPA/ESD. Response to Small Business Outreach Input Prior to SBREFA. E-mail to from Keith Barnett, EPA/ESD to Reinforced Plastic Composites small entity owners/operators discussing additional information on the approach used to calculate costs to meet the MACT floor. E-mail to from Keith Barnett, EPA/ESD to Reinforced Plastic Composites small entity owners/operators providing a change made to the table of MACT floors for existing sources. Letter from Kenneth R. Anderson, Peterson Products, Inc. to Keith Barnett, EPA/ESD, discussing comments on how the draft proposed MACT would affect his company. Letter from Lowell H. Miles, Miles Fiberglass & Composites, to Keith Barnett, EPA/ESD, regarding comments on draft proposed MACT. Letter from Brian Zinser, GPI, to Keith Barnett, EPA/ESD, regarding comments on draft proposed MACT. Letter from Jon L'hommedieu, Altec Engineering, Inc. to Keith Barnett, EPA/ESD, regarding comments on draft proposed MACT.
II-J-2 II-J-3
October 13, 1998 December 21, 1999
II-J-4
January 4, 2000
II-J-5
January 4, 2000
II-J-6
January 6, 2000
II-J-7
January 6, 2000
II-J-8
January 10, 2000
II-J-9
January 6, 2000
Docket No. A-94-52 Subcategory II-J Small Business Outreach Materials and SBREFA Materials Document Number II-J-10 II-J-11 Date Rcvd in Docket Commenter, Addressee, Title or Description, etc. Date of Document
Duplicate letter - Removed Letter from Edward M. Short, Justin Tanks, to Keith Barnett, EPA/ESD, regarding comments on draft proposed MACT. Letter from Mike Hood, Hood Manufacturing, Inc., to Keith Barnett, EPA/ESD, regarding comments on draft proposed MACT. Letter from Kelly DeBusk, Appalachian Plastics, Inc., to Keith Barnett, EPA/ESD, regarding comments on draft proposed MACT. Letter from Neil C. Olsen, Xerxes Corporation, to Keith Barnett, EPA/ESD, regarding comments on draft proposed MACT. Letter from Alex Sizemore, Arrowhead Plastic Engineering, Inc., to Keith Barnett, EPA/ESD, regarding small business concerns on pending MACT. Letter from Jack E. Griffiths, Fiber Pro, Inc. to Keith Barnett, EPA/ESD, regarding small business concerns on pending MACT. Letter from Gary Multanen, Fiberglass Systems, Inc., to Keith Barnett, EPA/ESD, regarding small business concerns on pending MACT. Letter from Paul M. (Monty) Felix, Alaglass, Pools, to Keith Barnett, EPA/ESD, regarding small business concerns on pending MACT. Letter from Keith Barnett, EPA/ESD, to Austin Perez, SBA. Information on cost data for reinforced Plastics. January 7, 2000
II-J-12
January 7, 2000
II-J-13
January 9, 2000
II-J-14
January 10, 2000
II-J-15
January 11, 2000
II-J-16
January 11, 2000
II-J-17
January 26, 2000
II-J-18
February 7, 2000
II-J-19
February 8, 2000
Docket No. A-94-52 Subcategory II-J Small Business Outreach Materials and SBREFA Materials
Document Number II-J-20
Date Rcvd in Docket
Commenter, Addressee, Title or Description, etc.
Date of Document February 23, 2000
Letter from Keith Barnett, EPA/ESD, to John Pawlow, SBA, and Peter Eglington, OMB, concerning costs and point value equation development. Draft Chapter 4 of the Reinforced Plastic Composites Background Information Document. Letter from Tom Kelly, EPA Small Business Advocacy Chair to Donald Arbuckle, OMB, announcing the convening of the Small Business Advocacy Review (SBAR) Panel for the Reinforced Plastics Composites MACT Standard. Letter from Keith Barnett, EPA/ESD, to Peter Eglington, OMB, and Jonathan Pawlow, SBA. Draft cost chapter for Reinforced Plastic Composites Background Information Document. Memo from John Schweitzer, Composites Fabricators association to Keith Barnett, EPA/ESD, regarding CFA materials sent to small entity representatives. Memo from Jennifer Greenamoyer, EPA, to Keith Barnett, EPA/ESD, concerning material distributed by the CFA to the SBAR Panel members. Memo from Jennifer Greenamoyer, EPA. to Austin Perez, SBA, concerning revised cost tables for SER Outreach
II-J- 21 II-J-22
March 17, 2000 March 29, 2000
II-J- 23
April 4, 2000
II-J-24
April 26, 2000
II-J-25
May 3, 2000
II-J-26
May 4, 2000
Docket No. A-94-52 Subcategory II-J Small Business Outreach Materials and SBREFA Materials
Document Number II-J-27
Date Rcvd in Docket
Commenter, Addressee, Title or Description, etc.
Date of Document June 2, 2000
Final Report of the Small Business Advocacy Review Panel on Planned Proposed Rule: Reinforced Plastics Composites Maximum Achievable Control Technology Standard.