iso_update-december_2010 by wanghonghx

VIEWS: 276 PAGES: 37

									International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an
International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When
consensus has been reached within the technic al committee, the document is sent to the Central Secretariat for processing as a draft
International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is
subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.




CD registered

Period from 01 November to 30 November 2010

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.



TC 8                 Ships and marine technology

ISO/CD 24409-        Ships and marine technology — Design, location and use of shipboard safety signs, safety-related signs, safety
2                    notices and safety markings — Part 2: Catalogue

ISO/CD 17357         Ships and marine technology-Floating pneumatic rubber fenders

TC 17                Steel

ISO/CD 14404-        Calculation method of CO2 emission intensity from iron and steel production — Part 1: Steel plant w ith blast
1                    furnace

ISO/CD 14404-        Calculation method of CO2 emission intensity from iron and steel production — Part 2: Steel plant w ith EAF
2                    (Electic Arc Furnace)

ISO/CD 13270         Steel fibres for concrete — Definitions and specific ations

TC 20                Aircraft and space vehicles

ISO/CD 11233         Space Systems — Orbit determination and estimation

TC 22                Road vehicles

ISO/CD 11992-        Road vehicles — Interchange of digital information on electrical connections between tow ing and towed vehicles
2                    — Part 2: Application layer for brakes and running gear

ISO/CD 22900-        Road vehicles — Modular vehicle communication interface (MVCI) — Part 3: Diagnostic server application
3                    programming interface (D-Server API)

ISO/CD 2974          Diesel engines — High-pressure fuel injection pipe end-connections with 60 degrees female cone
TC 23           Tractors and machinery for agriculture and forestry

ISO/CD 25358    Crop protection equipment — Droplet-siz e spectra from atomizers — Measurement and classif ication

TC 38           Textiles

ISO/CD 16373    Textiles - Determination method of carcinogenic dyestuffs - Acid dyestuffs

TC 43           Acoustics

ISO/CD 16251-   Acoustic s — Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a
1               reduced size standard floor — Part 1: Heavyweight floor

TC 44           Welding and allied processes

ISO/CD 14114    Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General
                requirements

TC 45           Rubber and rubber products

ISO/CD 127      Rubber, natural latex concentrate — Determination of KOH number

ISO/DTS         Rubber compounding ingredients — Carbon black — Determination of the aggregate-size distribution at
16176           ultimate dispersion

TC 67           Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
                industries

ISO/CD 14998    Petroleum and natural gas industries — Dow nhole equipment — Accessory completion equipment

TC 71           Concrete, reinforced concrete and pre-stressed concrete

ISO/CD 14824-   Grout for prestressing tendons                       — Part 1: Basic requirements
1

ISO/CD 14824-   Grout for prestressing tendons             — Part 2: Grouting procedures
2

ISO/CD 14824-   Grout for prestressing tendons             — Part 3: Test methods
3

TC 92           Fire safety

ISO 12468-      External exposure of roofs to fire — Part 1: Test method — Amendment 1
1:2003/CD
Amd 1

TC 106          Dentistry

ISO/CD 10323    Dental rotary instruments — Bore diameters for discs and wheels

TC 107          Metallic and other inorganic coatings

ISO/CD 13826    Determination of thermal conductivity of thermal sprayed ceramic coatings by laser flash method

ISO/DTR         Standard method for porosity measurement of thermally sprayed coatings
26946

TC 111          Round steel link chains, chain slings, components and accessories

ISO/CD 7597     Forged steel lifting hooks w ith point and eye for use with steel chains of grade T(8)

TC 122          Packaging

ISO/CD 18602    Packging - Packaging and the environment; optimization of the packaging systems
TC 130          Graphic technology

ISO/CD 12640-   Graphic technology — Prepress digital data exchange — Part 5: Scene-referred standard colour image data
5               (RIMM/SCID)

TC 131          Fluid power systems

ISO/CD 14540    Hydraulic fluid power - Screw -to-connect quick-action couplings for very high pressure fluid power applications -
                Dimensions and requirements

ISO/CD 14541    Hydraulic fluid power - Screw -to-connect quick-action couplings for general purpose - Dimensions and
                requirements

ISO/DTR         Hydraulic fluid power — Hose assemblies — Part 2: Recommended practices for hydraulic hose assemblies
17165-2

TC 145          Graphical symbols

ISO 7010/CD     Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 115:
Amd 115         Evacuation temporary safe area/refuge for persons unable to use stairs

ISO 7010/CD     Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 116:
Amd 116         Emergency call point

ISO 7010/CD     Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 117: First aid
Amd 117         call point

ISO 7010/CD     Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 118: Fire alarm
Amd 118         sounder

TC 147          Water quality

ISO/CD 16308    Water quality — Determination of glyphosate and AMPA — Method using high performance liquid
                chromatography (HPLC) w ith tandem mass spectrometric detection

ISO/CD 17994    Water quality — Criteria for establishing equiv alence betw een microbiological methods

ISO/CD 16665    Water quality — Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna

ISO/CD 23893-   Water quality — Biochemical and physiological measurements on fis h — Part 3: Determination of vitellogenin
3

TC 150          Implants for surgery

ISO/CD 13179-   Implants for surgery — Titanium plasma sprayed coatings — Part 1: General requirements
1

TC 157          Non-s ystemic contraceptives and STI barrier prophylactics

ISO/CD 11249    Mechanical contraceptiv es — Guidance for clinical evaluation of intra-uterine contraceptiv e devices (IUDs)

ISO/CD 29943-   Condoms — Guidance on clinical studies — Part 2: Female condoms, functionality studies of acute failure
2               events based on self-reports

TC 172          Optics and photonics

ISO/CD 11979-   Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary
1

ISO/CD 11979-   Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods
3

ISO 11979-      Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information — Amendment 1
4:2008/CD
Amd 1

ISO/CD 22665    Ophthalmic optics and instruments - Instruments to measure axial distances in the eye
TC 206               Fine ceramics

ISO/CD 11894-        Fine ceramic (advanced ceramics, advanced technical ceramics) — Test method for conductiv ity measurement
1                    of ion-conductive fine ceramics — Part 1: Oxide ion conducting solid electrolytes

TC 215               Health informatics

ISO/DTR              Health informatics — Personal health records: Definition, scope, context and global variations of use
14292

TC 218               Timber

ISO/CD 16415         Non-structural timber grading requir ements

TC 219               Floor coverings

ISO/CD 14486         Laminate floor coverings — Laminate floor covering — Specif ication

JTC 1                Information technology

ISO/IEC CD           Information technology — Telecommunications and information exchange between systems — Near Field
21481                Communication Interface and Protocol -2 (NFCIP-2)

ISO/IEC CD           Programming languages — C
9899

ISO/IEC              Information technology — Security techniques — Digital signatures with appendix — Part 3: Discrete logarithm
14888-               based mechanisms — Amendment 2
3:2006/PDAM
2

ISO/IEC CD           Information security management for inter-sector and inter-organizational communications
27010

ISO/IEC CD           Proposal on an Information security governance (ISG) framew ork
27014

ISO/IEC CD           Information technology — Automatic identif ication and data capture techniques — Part 1: Air Interface for
29167-1              security services and file management for RFID architecture

ISO/IEC PDTR         Open Document For mat (ISO/IEC 26300) / Office Open XML (ISO/IEC 29500) Translation Guidelines
29166

ISO/IEC PDTR         Information Technology - Interoperability w ith Assis tive Technology (AT) — Part 2: Windows accessibility API
13066-2

ISO/IEC PDTR         Information Technology - Interoperability with Assis tive Technology (AT) — Part 3: I-Accessible-2 accessibility
13066-3              API




DIS circulated

Period from 01 November to 30 November 2010

These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only



                                                                                                                           Vote
                                                                                                                     terminates

TC 8                  Ships and marine technology

ISO/DIS 13613     *   Ships and marine technology — Maintenance and testing to reduce losses in critical systems     2011-04-17
                      for propuls ion

ISO/DIS 13713     *   Ships and marine technology — Ship's mooring and towing fittings — Mooring chocks              2011-04-24

ISO/DIS 13728     *   Ships and marine technology — Ship's mooring and towing fittings — Panama chocks               2011-04-24

ISO/DIS 13729     *   Ships and marine technology — Ship's mooring and towing fittings — Closed chocks               2011-04-24

ISO/DIS 13733     *   Ships and marine technology — Ship's mooring and towing fittings — Universal fairleads with    2011-04-24
                      upper roller

ISO/DIS 13742     *   Ships and marine technology — Ship's mooring and towing fittings — Universal fairleads         2011-04-24
                      without upper roller

ISO/DIS 13755     *   Ships and marine technology — Ship's mooring and towing fittings — Steel rollers               2011-04-24

ISO/DIS 13767     *   Ships and marine technology — Ship's mooring and towing fittings — Shipside roller fairleads   2011-04-24

ISO/DIS 13776     *   Ships and marine technology — Ship's mooring and towing fittings — Pedestal fairleads          2011-04-24

ISO/DIS 13795     *   Ships and marine technology — Ship's mooring and towing fittings — Welded steel bollards       2011-04-24
                      for sea-going vessels

ISO/DIS 13797     *   Ships and marine technology — Ship's mooring and towing fittings — Crucif orm bollards         2011-04-24

ISO/DIS 13798     *   Ships and marine technology — Ship's mooring and towing fittings — Recessed bitts (Steel       2011-04-24
                      plate type)

ISO/DIS 13799     *   Ships and marine technology — Ship's mooring and towing fittings — Recessed bitts (Casting     2011-04-24
                      type)

TC 17                 Steel

ISO/DIS 16172         Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe                       2011-04-20

                      (Revision of ISO 16172:2006)

TC 20                 Aircraft and space vehicles

ISO/DIS 6772      *   Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting              2011-04-02
                      assemblies
                      (Revision of ISO 6772:1988)

ISO/DIS           *   Space systems — Programme management — Part 2: Product assurance                               2011-04-13
14300-2
                      (Revision of ISO 14300-2:2002)

TC 22                 Road vehicles

ISO/DIS           *   Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requir ements       2011-04-03
15501-1
                      (Revision of ISO 15501-1:2001)

TC 23                 Tractors and machinery for agriculture and forestry

ISO/DIS           *   Agric ultural and forestry machinery — Sprayers and liquid fertilizer distributors —           2011-04-05
16119-1             Environmental protection — Part 1: General

ISO/DIS         *   Agric ultural and forestry machinery — Sprayers and liquid fertilizer distributors —          2011-04-05
16119-2             Environmental protection — Part 2: Horizontal-boom and similar sprayers

ISO/DIS         *   Agric ultural and forestry machinery — Sprayers and liquid fertilizer distributors —          2011-04-05
16119-3             Environmental protection — Part 3: Sprayers for bush, tree and similar crops

ISO/DIS             Crop protection equipment — Drift classific ation of spraying equipment — Part 3: Potential   2011-05-01
22369-3             spray drif t measurement for field crop sprayers by the use of a test bench

TC 24               Particle characterization including sieving

ISO/DIS         *   Colloidal systems — Methods for zeta-potential determination — Part 1: Electroacoustic and    2011-04-10
13099-1             electrokinetic phenomena

ISO/DIS         *   Colloidal systems — Methods for zeta-potential determination — Part 2: Optical methods        2011-04-10
13099-2

TC 35               Paints and varnishes

ISO/DIS         *   Paints and varnishes — Determination of curing characteristics using a free-damped            2011-04-23
12013-1             oscillation method — Part 1: Start temperature of reaction

ISO/DIS         *   Paints and varnishes — Determination of curing characteristics using a free-damped            2011-04-23
12013-2             oscillation method — Part 2: Glass-transition temperature

TC 36               Cinematography

ISO/DIS             Digital cinema (D-cinema) distribution master — Part 11: Additional frame rates               2011-04-23
26428-11

ISO/DIS             Digital cinema (D-cinema) distribution master — Part 19: Serial digital interface signal      2011-04-23
26428-19            formatting for additional frame rates level AFR2 and level AFR4

ISO/DIS             Digital cinema (D-cinema) packaging — Part 13: Operational constraints for additional frame   2011-04-23
26429-13            rates

TC 38               Textiles

ISO/DIS 4920    *   Textiles — Determination of resistance to surface wetting (spray test)                        2011-04-05
                    (Revision of ISO 4920:1981)

TC 44               Welding and allied processes

ISO/DIS         *   Welding consumables — Fluxes for submerged arc welding and electroslag welding —              2011-02-05
14174.2             Classification
                    (Revision of ISO 14174:2004)

ISO/DIS 13588   *   Non-destructive testing of welds — Ultrasonic testing — Use of (semi-) automated phased       2011-04-05
                    array technology

ISO/DIS         *   Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray            2011-04-05
17636-1             techniques w ith film
                    (Revision of ISO 17636:2003)

ISO/DIS         *   Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray            2011-04-05
17636-2             techniques w ith digital detectors

ISO/DIS         *   Specific ation and qualific ation of welding procedures for metallic materials — Welding      2011-04-12
15614-13            procedure test — Part 13: Resistance butt (upset) and flash welding
                    (Revision of ISO 15614-13:2005)

TC 54               Essential oils
ISO/DIS 4731    *   Oil of geranium (Pelargonium x ssp.)                                                            2011-04-13
                    (Revision of ISO 4731:2006)

TC 58               Gas cylinders

ISO/DIS 14246   *   Gas cylinders — Cylinder valv es — Manufacturing tests and examinations                         2011-04-26
                    (Revision of ISO 14246:2001)

ISO/DIS         *   Gas cylinders of composite construction — Specif ication and test methods — Part 1: Hoop        2011-04-18
11119-1             wrapped composite gas cylinders and tubes
                    (Revision of ISO 11119-1:2002)

ISO/DIS         *   Gas cylinders of composite construction — Specif ication and test methods — Part 3: Fully       2011-04-18
11119-3             wrapped fibre reinforced composite gas cylinders and tubes w ith non-metallic and non-load-
                    sharing metal liners
                    (Revision of ISO 11119-3:2002)

ISO/DIS         *   Gas cylinders — Refillable seamless steel tubes of water capacity betw een 150 l and 3000 l     2011-01-05
11120.2             — Design construction and testing
                    (Revision of ISO 11120:1999)

ISO/DIS 11515   *   Gas cylinders — Refilable composite reinforced tubes of water capacity betw een 150 L and       2011-04-17
                    3000 L — Design, construction and testing

ISO             *   Gas cylinders — Precautionary labels — Amendment 1                                              2011-04-05
7225:2005/DA
md 1

TC 61               Plastics

ISO/DIS 2561        Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-            2011-04-24
                    resistant polystyrene (PS-I) by gas chromatography
                    (Revision of ISO 2561:2006)

TC 67               Materials, equipment and offshore structures for petroleum, petrochemical
                    and natural gas industries

ISO/DIS         *   Petroleum and natural gas industries — Design and operation of subsea production systems        2011-04-12
13628-8             — Part 8: Remotely operated tools and interfaces on subsea production systems
                    (Revision of ISO 13628-9:2000, ISO 13628-8:2002)

TC 69               Applications of statistical methods

ISO/DIS             Capability of detection — Part 6: Methodology for the determination of the critical value and   2011-04-23
11843-6             the minimum detectable values in Poisson distribution measurements

ISO/DIS             Capability of detection — Part 7: Methodology based on stochastic properties of instrumental    2011-04-23
11843-7             noise

TC 71               Concrete, reinforced concrete and pre-stressed concrete

ISO/DIS             Environmental management for concrete and concrete struc tures — Part 1: General principles     2011-04-27
13315-1

TC 76               Transfusion, infusion and injection, and blood processing equipment for
                    medical and pharmaceutical use

ISO/DIS         *   Prefilled syringes — Part 6: Plastic barrels for injectables                                    2011-04-11
11040-6

TC 84               Devices for administration of medicinal products and intravascular catheters
ISO/DIS         *   Needle-based injection systems for medical use — Requirements and test methods — Part 1:        2011-04-05
11608-1             Needle-based injection systems
                    (Revision of ISO 11608-1:2000)

ISO/DIS 23907   *   Sharps injury protection — Requirements and test methods — Sharps containers                    2011-04-12

TC 94               Personal safety -- Protective clothing and equipment

ISO/DIS         *   Personal equipment for protection against falls — Rope access systems — Part 2: Code of         2011-04-12
22846-2             practic e

TC 96               Cranes

ISO/DIS 7752-   *   Cranes — Control layout and characteristic s — Part 2: Basic arrangement and requirements       2011-04-19
2                   for mobile cranes
                    (Revision of ISO 7752-2:1985, ISO 7752-2:1985/Add 1:1986)

ISO/DIS         *   Cranes — Access, guards and restraints — Part 4: Jib cranes                                     2011-04-19
11660-4

TC 107              Metallic and other inorganic coatings

ISO/DIS 12671       Thermal spraying - Thermally sprayed coatings - Symbolic representation on draw ings            2011-04-18

TC 108              Mechanical vibration, shock and condition m onitoring

ISO/DIS             Mechanical vibration — Vibration of rotating machinery equipped w ith activ e magnetic          2011-04-26
14839-4             bearings — Part 4: Technic al guidelines

TC 110              Industrial trucks

ISO/DIS         *   Industrial trucks — Verif ication of stability — Part 13: Rough-terrain trucks with mast        2011-04-19
22915-13

TC 115              Pumps

ISO/DIS 13710   *   Petroleum, petrochemical and natural gas industries — Reciprocating positive displacement       2011-04-12
                    pumps
                    (Revision of ISO 13710:2004)

TC 119              Powder metallurgy

ISO/DIS 2739    *   Sintered metal bushings — Determination of radial crushing strength                             2011-04-12
                    (Revision of ISO 2739:2006)

TC 121              Anaesthetic and respiratory equipment

ISO/DIS 8835-   *   Inhalational anaesthesia systems — Part 7: Anaesthetic systems for use in areas w ith limited   2011-04-11
7                   logistical supplies of electricity and anaesthetic gases

TC 122              Packaging

ISO/DIS 16495   *   Packaging — Transport packaging for dangerous goods — Test methods                              2011-04-05

TC 123              Plain bearings

ISO/DIS 7148-       Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing   2011-05-01
1                   of bearing metals
                    (Revision of ISO 7148-1:1999)

ISO/DIS 7148-       Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing   2011-05-01
2                   of poly mer-based bearing materials
                    (Revision of ISO 7148-2:1999)
TC 135              Non-destructive testing

ISO/DIS             Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 1:     2011-04-26
16526-1             Voltage divider method

ISO/DIS             Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 2:     2011-04-26
16526-2             Constancy check by the thick filter method

ISO/DIS             Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 3:     2011-04-26
16526-3             Spectrometric method

TC 138              Plastics pipes, fittings and valves for the transport of fluids

ISO/DIS         *   Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1:   2011-04-03
12176-1             Butt fusion
                    (Revision of ISO 12176-1:2006)

TC 146              Air quality

ISO/DIS         *   Workplace air — Determination of metals and metalloids in airborne particulate matter by     2011-04-24
15202-1             inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
                    (Revision of ISO 15202-1:2000)

TC 147              Water quality

ISO/DIS 12846   *   Water quality — Determination of mercury — Method using atomic absorption spectrometry       2011-04-12
                    (AAS) w ith and without enrichment

ISO/DIS 9308-   *   Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 2: Most         2011-04-18
2                   probable number method
                    (Revision of ISO 9308-2:1990)

ISO/DIS 6341    *   Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus      2011-04-12
                    (Cladocera, Crustacea) — Acute toxicity test
                    (Revision of ISO 6341:1996, ISO 6341:1996/Cor 1:1998)

TC 150              Implants for surgery

ISO/DIS 7206-   *   Implants for surgery — Partial and total hip joint prostheses — Part 6: Determination of     2011-01-10
6.2                 endurance properties of head and neck region of stemmed femoral components
                    (Revision of ISO 7206-6:1992)

ISO/DIS 27185   *   Cardiac rhythm management devices — Symbols to be used with cardiac rhythm                   2011-04-17
                    management device labels, and information to be supplied — General requirements

TC 163              Thermal performance and energy use in the built environment

ISO/DIS 12631   *   Thermal performance of curtain walling — Calculation of thermal transmittance                2011-04-05

TC 178              Lifts, escalators and moving walks

ISO/DIS         *   Energy performance of lif ts, escalators and moving walks — Part 1: Energy measurement and   2011-04-12
25745-1.2           conformance

TC 190              Soil quality

ISO/DIS         *   Soil quality — Determination of selected explosive compounds — Part 1: Method using high-    2011-04-03
11916-1             performance liquid chromatography (HPLC) w ith ultraviolet detection

ISO/DIS         *   Soil quality — Determination of selected explosive compounds — Part 2: Method using gas      2011-04-03
11916-2             chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection
                    (MS)

TC 201              Surface chemical analysis
ISO/DIS 11039   *   Surface chemical analysis — Scanning-probe microscopy — Measurement of drift rate               2011-05-01

TC 204              Intelligent transport systems

ISO/DIS 10711   *   Intelligent Transport Systems — Interface Protocol and Message Set Definition between           2011-04-11
                    Traffic Signal Controllers and Detectors(IPMSTSCD)

TC 211              Geographic information/Ge omatics

ISO/DIS 19117   *   Geographic information — Portrayal                                                              2011-04-23
                    (Revision of ISO 19117:2005)

ISO/DIS         *   Geographic information - Classif ication systems — Part 2: Land Cover Meta Language             2011-04-19
19144-2             (LCML)

TC 215              Health informatics

ISO/DIS 1828    *   Health informatics — Categorial structure for classif ications and coding systems of surgical   2011-04-19
                    procedures

ISO/HL7 DIS     *   Health informatics — Clinical genomics pedigree topic                                           2011-04-13
13449

TC 223              Societal Security

ISO/DIS 22301   *   Societal security — Preparedness and continuity management systems — Requirements               2011-04-27

TC 225              Market, opinion and social research

ISO/DIS 20252   *   Market, opinion and social research — Vocabulary and service requirements                       2011-04-26
                    (Revision of ISO 20252:2006)

TC 239              Project Committee: Network services billing

ISO/DIS 14452   *   Netw ork services billing                                                                       2011-04-11

IULTCS              International Union of Leather Technologists and Chemists Societies

ISO/DIS 11640   *   Leather — Tests for colour fastness — Colour fastness to cycles of to-and-fro rubbing           2011-04-26
                    (Revision of ISO 11640:1993)

ISO/DIS 11641   *   Leather — Tests for colour fastness — Colour fastness to perspiration                           2011-04-26
                    (Revision of ISO 11641:1993)

ISO/DIS 11642   *   Leather — Tests for colour fastness — Colour fastness to water                                  2011-04-26
                    (Revision of ISO 11642:1993)

JTC 1               Information technology

ISO/IEC             Identification cards — Test methods — Part 6: Proximity cards — Amendment 8                     2011-03-18
10373-
6:2001/DAmd
8.2

ISO/IEC             Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio   2011-03-18
14443-              frequency power and signal interface — Amendment 4
2:2010/DAmd
4.2

ISO/IEC DIS     *   Information technology — Document Schema Definition Languages (DSDL) — Part 11:                 2011-04-02
19757-11            Schema Association
FDIS circulated

Period from 01 November to 30 November 2010

These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown

* Available in English only


                                                                                                                             Vote
                                                                                                                       terminates

TC 4                  Rolling bearings

ISO/FDIS 15       *   Rolling bearings — Radial bearings — Boundary dimensions, general plan                          2011-01-27
                      (Revision of ISO 15:1998)

TC 20                 Aircraft and space vehicles

ISO/FDIS          *   Space systems — Programme management — Breakdow n of project management structures              2011-01-25
27026

TC 22                 Road vehicles

ISO/FDIS          *   Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4:         2011-01-03
15765-4.2             Requirements for emissions-related systems
                      (Revision of ISO 15765-4:2005)

ISO/FDIS          *   Road vehicles — Heavy commercial vehicles and buses — Lateral transient response test           2011-01-13
14793                 methods
                      (Revision of ISO 14793:2003)

ISO/FDIS          *   Heavy commercial vehicles and buses — Braking in a turn — Open-loop test methods                2011-01-13
14794
                      (Revision of ISO 14794:2003)

ISO/FDIS          *   Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test         2011-01-13
16333                 method
                      (Revision of ISO 16333:2004)

ISO/FDIS          *   Passenger cars — Free-steer behaviour — Part 1: Steering-release open-loop test method          2011-01-27
17288-1
                      (Revision of ISO 17288-1:2002)

ISO/FDIS          *   Passenger cars — Free-steer behaviour — Part 2: Steering-pulse open-loop test method            2011-01-27
17288-2
                      (Revision of ISO 17288-2:2004)

TC 34                 Food products

ISO/FDIS 7301     *   Rice — Specific ation                                                                           2011-01-25
                 (Revision of ISO 7301:2002)

ISO/FDIS     *   Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part   2011-01-19
12966-2          2: Preparation of methyl esters of fatty acids
                 (Revision of ISO 5509:2000)

TC 35            Paints and varnishes

ISO/FDIS     *   Paints and varnishes — Determination of density — Part 1: Pyknometer method                  2011-01-19
2811-1
                 (Revision of ISO 2811-1:1997)

ISO/FDIS     *   Paints and varnishes — Determination of density — Part 2: Immersed body (plummet)            2011-01-19
2811-2           method
                 (Revision of ISO 2811-2:1997)

ISO/FDIS     *   Paints and varnishes — Determination of density — Part 3: Oscillation method                 2011-01-19
2811-3
                 (Revision of ISO 2811-3:1997)

ISO/FDIS     *   Paints and varnishes — Determination of density — Part 4: Pressure cup method                2011-01-19
2811-4
                 (Revision of ISO 2811-4:1997)

TC 37            Terminology and other language and content resources

ISO/FDIS     *   Terminological entries in standards — Part 1: General requirements and examples of           2011-01-26
10241-1          presentation
                 (Revision of ISO 10241:1992)

TC 39            Machine tools

ISO/FDIS     *   Production equipment for microsystems — Interface between end effector and handling          2011-01-20
29262            system

TC 68            Financial services

ISO/FDIS     *   Financial services — Personal Identification Number (PIN) management and security — Part     2011-01-05
9564-1           1: Basic principles and requirements for PINs in card-based systems
                 (Revision of ISO 9564-1:2002, ISO 9564-3:2003)

TC 94            Personal safety -- Protective clothing and equipment

ISO/FDIS     *   Wildland firefighting personal protectiv e equipment — Requirements and test methods         2011-01-27
16073.3

TC 121           Anaesthetic and respiratory equipment

ISO/FDIS     *   Medical electrical equipment — Part 2-12: Particular requirements for basic safety and       2011-01-05
80601-2-12       essential performance of critical care ventilators

TC 138           Plastics pipes, fittings and valves for the transport of fluids

ISO/FDIS     *   Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3:   2011-01-25
12176-3          Operator's badge
                 (Revision of ISO 12176-3:2006)

TC 147           Water quality

ISO/FDIS     *   Water quality — Sampling — Part 23: Guidance on passive sampling                             2011-01-26
5667-23
TC 150              Implants for surgery

ISO/FDIS        *   Wear of implant materials — Polymer and metal w ear particles — Isolation and                 2011-01-31
17853               characterization
                    (Revision of ISO 17853:2010)

TC 157              Non-s ystemic contraceptives and STI barrier prophylactics

ISO             *   Rubber condoms for clinical trials — Measurement of physical properties — Amendment 1         2011-01-05
16037:2002/F
DAmd 1

TC 164              Mechanical testing of metals

ISO/FDIS        *   Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature         2011-01-19
6892-2
                    (Revision of ISO 783:1999)

TC 172              Optics and photonics

ISO/FDIS 8624   *   Ophthalmic optics — Spectacle frames — Measuring system and terminology                       2011-01-05
                    (Revision of ISO 8624:2002)

TC 173              Assistive products for persons with disability

ISO/FDIS        *   Urine-absorbing aids — General guidelines on evaluation                                       2011-01-13
15621
                    (Revision of ISO 15621:1999)

TC 213              Dimensional and geometrical product specifications and verification

ISO/FDIS        *   Geometrical product specif ications (GPS) — Cylindricity — Part 1: Vocabulary and             2011-01-26
12180-1             parameters of cylindrical form
                    (Revision of ISO/TS 12180-1:2003)

ISO/FDIS        *   Geometrical product specif ications (GPS) — Cylindricity — Part 2: Specific ation operators   2011-01-26
12180-2
                    (Revision of ISO/TS 12180-2:2003)

ISO/FDIS        *   Geometrical product specif ications (GPS) — Flatness — Part 1: Vocabulary and parameters      2011-01-26
12781-1             of flatness
                    (Revision of ISO/TS 12781-1:2003)

ISO/FDIS        *   Geometrical product specif ications (GPS) — Flatness — Part 2: Specif ication operators       2011-01-26
12781-2
                    (Revision of ISO/TS 12781-2:2003)

TC 215              Health informatics

ISO/FDIS        *   Health informatics — Harmonized data types for information interchange                        2011-01-12
21090

IULTCS              International Union of Leather Technologists and Chemists Societies

ISO/FDIS        *   Leather — Chemical determination of metal content — Part 1: Extractable metals                2011-01-12
17072-1

ISO/FDIS        *   Leather — Chemical determination of metal content — Part 2: Total metal content               2011-01-12
17072-2

JTC 1               Information technology
ISO/IEC FDIS   *   Information technology — Mobile Multicast Communications: Framew ork — Part 1:                2011-01-24
24793-1

ISO/IEC FDIS   *   Information technology — Mobile Multicast Communications: Protocol over native IP multicast   2011-01-24
24793-2            networks — Part 2:

ISO/IEC FDIS   *   Systems and software engineering — High-level Petri nets — Part 2: Transfer format            2011-01-13
15909-2.2

ISO/IEC FDIS   *   Information technology — Servic e management — Part 1: Service management system              2011-01-03
20000-1            requirements
                   (Revision of ISO/IEC 20000-1:2005)

ISO/IEC FDIS   *   Systems and software engineering — Systems and software Quality Requirements and              2011-01-05
25040              Evaluation (SQuaRE) — Evaluation process

ISO/IEC        *   Identification cards — Contactless integrated circuit cards — Proximity cards — Part 1:       2011-01-13
14443-             Physical characteristics — Amendment 1: Additional PICC classes
1:2008/FDAmd
1

ISO/IEC FDIS   *   Identification cards — Integrated circuit card programming interfaces — Part 5: Testing       2011-01-04
24727-5            procedures

ISO/IEC        *   Information technology — Security techniques — Encryption algorithms — Part 1: General —      2011-01-27
18033-             Amendment 1
1:2005/FDAmd
1

ISO/IEC FDIS   *   Information technology — Security techniques — Guidelines for information and                 2011-01-11
27031              communication technology readiness for business continuity

ISO/IEC        *   Information technology — Coding of audio-visual objects — Part 5: Reference software —        2011-01-18
14496-             Amendment 27: Scalable complexity 3D mesh coding reference software
5:2001/FDAmd
27

ISO/IEC        *   Information technology — Coding of audio-visual objects — Part 27: 3D Graphics                2011-01-12
14496-             conformance — Amendment 2: Scalable complexity 3D mesh coding conformance
27:2009/FDAm
d2

ISO/IEC        *   Information technology — Multimedia content description interface — Part 12: Query format     2011-01-30
15938-             — Amendment 1: Reference software and flat metadata output
12:2008/FDAm
d1

ISO/IEC FDIS   *   Information technology — Multimedia application format (MPEG-A) — Part 5: Media               2011-01-12
23000-5            streaming application format
                   (Revision of ISO/IEC 23000-5:2008)

ISO/IEC FDIS   *   Information technology — MPEG extensible middlew are (MXM) — Part 3: MXM reference            2011-01-12
23006-3            software

ISO/IEC FDIS   *   Information technology — Database languages — SQL multimedia and application packages         2011-01-10
13249-3            — Part 3:
                   (Revision of ISO/IEC 13249-3:2006)

ISO/IEC FDIS   *   Information technology — Biometric application programming interface — Part 4: Biometric      2011-01-13
19784-4            sensor function provider interface

ISO/IEC FDIS   *   Information technology — Biometric performance testing and reporting — Part 5: Access         2011-01-25
19795-5            control scenario and grading scheme
Standards published

New International Standards published between 01 November and 30 November 2010

* Available in English only

** French version of standard previously published in English only


                                                                                                                             Price group

TC 4                  Rolling bearings

ISO 5753-             Rolling bearings — Internal clearance — Part 2: Axial internal clearance for four-point-contact ball            B
2:2010                bearings

TC 5                  Ferrous metal pipes and metallic fittings

ISO                   Ductile iron pipes, fittings, accessories and their joints for water applications — Technical                 free
2531:2009/Cor         Corrigendum 1
1:2010

ISO                   Restrained joint systems for ductile iron pipelines — Design rules and type testing                             B
10804:2010

TC 6                  Paper, board and pulps

ISO 2493-         *   Paper and board — Determination of bending resistance — Part 1: Constant rate of deflection                     D
1:2010

TC 8                  Ships and marine technology

ISO               *   Ships and marine technology — Measures to prevent asbestos emission and exposure during                         H
30007:2010            ship recycling

ISO 24409-        *   Ships and marine technology — Design, location and use of shipboard saf ety signs, safety-related               L
1:2010                signs, safety notices and safety markings — Part 1: Design principles

TC 17                 Steel

ISO               *   Continuously cold-rolled steel sheet products — Dimensional and shape tolerances                                C
16162:2010

ISO               *   Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances                          C
16163:2010

TC 20                 Aircraft and space vehicles

ISO               *   Aerospace — Requirements for digital equipment for measurements of aircraft electric al power                   G
12384:2010            characteristics

ISO               *   Space systems — Unmanned spacecraft — Estimating the mass of remaining usable propellant                        D
23339:2010
TC 22               Road vehicles

ISO                 Road vehicles — World manufacturer identifier (WMI) code — Technical Corrigendum 1                   free
3780:2009/Cor
1:2010

ISO 16232-          Road vehicles — Cleanliness of components of fluid circuits — Part 3: Method of extraction of          H
3:2007              contaminants by pressure rinsing

ISO 16232-          Road vehicles — Cleanliness of components of fluid circuits — Part 4: Method of extraction of          J
4:2007              contaminants by ultrasonic techniques

ISO 16232-          Road vehicles — Cleanliness of components of fluid circuits — Part 5: Method of extraction of          J
5:2007              contaminants on functional test bench

ISO 16232-          Road vehicles — Cleanliness of components of fluid circuits — Part 6: Particle mass                    E
6:2007              determination by gravimetric analysis

ISO 16232-          Road vehicles — Cleanliness of components of fluid circuits — Part 7: Particle sizing and counting     L
7:2007              by microscopic analysis

ISO 16232-          Road vehicles — Cleanliness of components of fluid circuits — Part 8: Particle nature                  D
8:2007              determination by microscopic analysis

ISO 16232-          Road vehicles — Cleanliness of components of fluid circuits — Part 9: Particle sizing and counting     J
9:2007              by automatic light extinction particle counter

ISO             *   Road vehicles — Sensitivity to lateral w ind — Open-loop test method using wind generator input        G
12021:2010

ISO 29061-      *   Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their     L
1:2010              interface with vehicle anchorage systems — Part 1: Vehic les and child restraint systems equipped
                    with ISOFIX anchorages and attachments

TC 27               Solid mineral fuels

ISO 1928:2009       Solid mineral fuels — Determination of gross calorific value by the bomb calorimetric method and       U
                    calculation of net calorific value

ISO             *   Hard coal — Method for the measurement of the swelling of hard coal using a dilatometer                F
23873:2010

TC 28               Petroleum products and lubricants

ISO 4404-       *   Petroleum and related products — Determination of the corrosion resistance of fire-resistant           D
2:2010              hydraulic fluids — Part 2: Non-aqueous fluids

ISO             *   Petroleum products — Determination of sulf ur content — Oxidative microcoulometry method               H
16591:2010

TC 30               Measurement of fluid flow in closed conduits

ISO 17089-          Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 1: Meters for          X
1:2010              custody transfer and allocation measurement

TC 31               Tyres, rims and valves

ISO 4249-           Motorcycle tyres and rims (code-designated series) — Part 3: Rims                                      F
3:2010

ISO 5751-           Motorcycle tyres and rims (metric series) — Part 1: Design guides                                      G
1:2010

ISO 5751-           Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities       Q
2:2010

ISO 5751-           Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours                     C
3:2010
TC 34               Food products

ISO 520:2010        Cereals and pulses — Determination of the mass of 1 000 grains                                       E

ISO 6731:2010       Milk, cream and evaporated milk — Determination of total solids content (Reference method)          C

ISO 6734:2010       Sw eetened condensed milk — Determination of total solids content (Reference method)                C

TC 38               Textiles

ISO                 Textiles — Qualification symbols for labelling workwear to be industrially laundered                 E
30023:2010

TC 43               Acoustics

ISO 3746:2010   *   Acoustic s — Determination of sound power levels and sound energy levels of noise sources using      T
                    sound pressure — Survey method using an enveloping measurement surface over a reflecting
                    plane

ISO 3747:2010       Acoustic s — Determination of sound power levels and sound energy levels of noise sources using      S
                    sound pressure — Engineering/survey methods for use in situ in a reverberant environment

TC 45               Rubber and rubber products

ISO 8029:2007       Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specific ation          F

ISO             *   Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized        XZ
21561:2005/A        SBR — Amendment 1
md 1:2010

ISO                 Rubber- or plastic s-coated fabric s — Physical and mechanic al tests — Determination of flex       G
32100:2010          resistance by the flexometer method

TC 46               Information and documentation

ISO/TR          *   Information and documentation - Implementation guidelines for digitization of records                P
13028:2010

ISO 16175-      *   Information and documentation — Principles and functional requirements for records in electronic    H
1:2010              office environments — Part 1: Overview and statement of principles

ISO 16175-      *   Information and documentation — Principles and functional requirements f or records in electronic   W
3:2010              office environments — Part 3: Guidelines and functional requirements for records in business
                    systems

TC 54               Essential oils

ISO                 Oil of fir needle, Siberian (Abies sibirica Ledeb.)                                                 D
10869:2010

TC 59               Buildings and civil engineering works

ISO                 Building construction — Sealants — Test method for the determination of stringiness                  B
11527:2010

TC 60               Gears

ISO/TR              Gears — Calculation of load capacity of wormgears                                                    X
14521:2010

TC 61               Plastics

ISO                 Plastics — Polyamides — Determination of e-caprolactam and w -laurolactam by gas                    G
11337:2010          chromatography

ISO 4611:2010       Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist          F
ISO 1874-           Plastics — Polyamide ( PA) moulding and extrusion materials — Part 1: Designation system and        H
1:2010              basis for specif ication

ISO 1874-           Plastics — Polyamide ( PA) moulding and extrusion materials — Part 2: Preparation of test           XZ
2:2006/Amd          specimens and determination of properties — Amendment 1: Laser sintering of specimens
1:2010

ISO             *   Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of        E
15064:2010          the isomer ratio in toluenediisocyanate

ISO 1268-           Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs —       XZ
4:2005/Amd          Amendment 1
1:2010

ISO                 Textile glass — Woven fabrics — Determination of thickness — Amendment 1                            XZ
4603:1993/Am
d 1:2010

ISO                 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit        D
10352:2010          area

TC 67               Materials, equipment and offshore structures for petroleum, petrochemical and
                    natural gas industries

ISO             *   Petroleum and natural gas industries — Installation and equipment for liquefied natural gas —       N
28460:2010          Ship-to-shore interface and port operations

ISO             *   Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests —        XZ
13500:2008/A        Amendment 1: Barite 4,1
md 1:2010

ISO             *   Petroleum and natural gas industries — Evaluation and testing of thread compounds for use with       T
13678:2010          casing, tubing, line pipe and drill stem elements

TC 70               Internal combustion engines

ISO 7967-       *   Reciprocating internal combustion engines — Vocabulary of components and systems — Part 2:           K
2:2010              Main running gear

TC 79               Light metals and their alloys

ISO             *   Light metals and their alloys — Titanium and titanium alloys — Classific ation and terminology      G
28401:2010

TC 92               Fire safety

ISO                 Standard test method for assessing the ignition propensity of cigarettes                             K
12863:2010

ISO             *   Fire tests — Uncertainty of measurements in fire tests                                               L
29473:2010

TC 94               Personal safety -- Protective clothing and equipment

ISO             *   Personal protectiv e equipment — Footw ear protecting against thermal risks and molten metal        H
20349:2010          splashes as found in foundries and welding — Requirements and test method

TC 102              Iron ore and direct reduced iron

ISO/TS          *   Direct reduced iron and hot briquetted iron — Determination of metallic iron — Iron(III) chloride   G
16878:2010          titrimetric method

TC 107              Metallic and other inorganic coatings

ISO 4534:2010       Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test             C

ISO                 Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities      F
12690:2010
ISO                 Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering     F
14921:2010          components

ISO                 Vitreous and porcelain enamels — Determination of the edge covering on enamelled steel plate to    C
28723:2008          be used in heat exchangers

ISO                 Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces —            B
28762:2010          Specific ation

ISO 9717:2010       Metallic and other inorganic coatings — Phosphate conversion coating of metals                      L

TC 113              Hydrometry

ISO 1100-       *   Hydrometry — Measurement of liquid flow in open channels — Part 2: Determination of the stage-     N
2:2010              discharge relationship

ISO 2425:2010   *   Hydrometry — Measurement of liquid flow in open channels under tidal conditions                    N

TC 117              Fans

ISO 13347-          Industrial fans — Determination of fan sound power levels under standardized laboratory            XZ
1:2004/Amd          conditions — Part 1: General overview — Amendment 1
1:2010

ISO 13347-          Industrial fans — Determination of fan sound power levels under standardized laboratory            XZ
3:2004/Amd          conditions — Part 3: Enveloping surface methods — Amendment 1
1:2010

TC 130              Graphic technology

ISO 15076-      *   Image technology colour management — Architecture, profile format and data structure — Part 1:     XA
1:2010              Based on ICC.1:2010

TC 131              Fluid power systems

ISO 4413:2010       Hydraulic fluid power — General rules and safety requirements for systems and their components      T

ISO 4414:2010       Pneumatic fluid power — General rules and safety requirements for systems and their                R
                    components

TC 138              Plastics pipes, fittings and valves for the transport of fluids

ISO 14531-      *   Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of    K
3:2010              gaseous fuels — Metric series — Specif ications — Part 3: Fittings for mechanical jointing
                    (including PE-X/metal transitions)

TC 146              Air quality

ISO             *   Workplace air quality — Determination of isocyanate in air using a double-filter sampling device   N
17736:2010          and analysis by high pressure liquid chromatography

TC 157              Non-s ystemic contraceptives and STI barrier prophylactics

ISO             *   Condoms — Determination of nitrosamines migrating from natural rubber latex condoms                 E
29941:2010

TC 159              Ergonomics

ISO 9241-           Ergonomics of human-system interaction — Part 129: Guidance on software individualization          U
129:2010

TC 160              Glass in building

ISO 28278-      *   Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules         Q
2:2010

TC 184              Automation systems and integration
ISO 10303-      *   Industrial automation systems and integration — Product data representation and exchange —             free
41:2005/Cor         Part 41: Integrated generic resource: Fundamentals of product description and support —
2:2010              Technical Corrigendum 2

ISO 10303-      *   Industrial automation systems and integration — Product data representation and exchange —             free
109:2004/Cor        Part 109: Integrated application resource: Kinematic and geometric constraints for assembly
1:2010              models — Technical Corrigendum 1

ISO/TS 10303-   *   Industrial automation systems and integration — Product data representation and exchange —             free
1676:2010           Part 1676: Application module: Functional decomposition to design

ISO/TS 10303-   *   Industrial automation systems and integration — Product data representation and exchange —             free
1743:2010           Part 1743: Application module: Shape parameters

ISO/TS 10303-   *   Industrial automation systems and integration — Product data representation and exchange —             XC
5001:2010           Part 5001: Guidance on the usage of ISO 10303-214 for gear units

ISO 22745-      *   Industrial automation systems and integration — Open technic al dictionaries and their application       C
13:2010             to master data — Part 13: Identification of concepts and terminology

TC 190              Soil quality

ISO                 Soil quality — Determination of chromium(VI) in solid material by alkaline digestion and ion             L
15192:2010          chromatography with spectrophotometric detection

TC 194              Biological evaluation of medical de vices

ISO/TR 22442-   *   Medical devices utilizing animal tissues and their derivativ es — Part 4: Principles for elimination     G
4:2010              and/or inactiv ation of transmissible spongif orm encephalopathy (TSE) agents and validation
                    assays for those processes

TC 201              Surface chemical analysis

ISO             *   Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of              G
12406:2010          arsenic in silicon

ISO                 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis                   N
10810:2010

ISO/TS          *   Surface chemical analysis — Analysis of metal oxide films by glow -dis charge optic al-emission          R
25138:2010          spectrometry

TC 204              Intelligent transport systems

ISO             *   Intelligent transport systems — Communications access for land mobiles (CALM) — M5                       R
21215:2010

ISO             *   Intelligent transport systems — Communications access for land mobiles (CALM) — Management               X
24102:2010

TC 212              Clinical laboratory testing and in vitro diagnostic test systems

ISO                 In vitro diagnostic medical devices — Information supplied by the manufacturer w ith in vitro            H
19001:2002          diagnostic reagents for staining in biology

TC 215              Health informatics

ISO                 Health informatics — Digital imaging and communication in medicine (DICOM) including w orkflow           F
12052:2006          and data management

ISO             *   Health informatics — Health indicators conceptual framew ork                                             K
21667:2010

TC 216              Footwear

ISO                 Footw ear — Test method for slide fasteners — Burst strength                                             C
10717:2010
TC 217              Cosmetics

ISO                 Cosmetics — Sun protection test methods — In vivo determination of the sun protection factor      S
24444:2010          (SPF)

TC 229              Nanotechnologies

ISO/TS          *   Nanotechnologies — Characterization of volatile components in single-wall carbon nanotube         E
11251:2010          samples using evolved gas analysis/gas chromatograph-mass spectrometry

ISO/TR              Nanotechnologies — Model taxonomic framew ork for use in developing vocabularies — Core           L
12802:2010          concepts

TMB                 Technical Management Board

ISO/IEC Guide       Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement      XA
98-3:2008           (GUM:1995)

JTC 1               Information technology

ISO/IEC TR      *   Information technology — Servic e management — Part 4: Process reference model                    L
20000-4:2010

ISO/IEC TR      *   Information technology — Programming languages, their environments and system software            L
24731-2:2010        interfaces — Extensions to the C library — Part 2: Dynamic Allocation Functions

ISO/IEC         *   Information technology — Home electronic system (HES) architecture — Part 5-4: Intelligent      XA
14543-5-            grouping and resource sharing for HES Class 2 and Class 3 — Devic e validation
4:2010

ISO/IEC 9798-   *   Information technology — Security techniques — Entity authentication — Part 6: Mechanisms         Q
6:2010              using manual data transfer

ISO/IEC         *   Information technology — Security techniques — Key management — Part 1: Framew ork                P
11770-1:2010

ISO/IEC             Information technology — Security techniques — Information security management systems —          K
27000:2009          Overview and vocabulary

ISO/IEC         *   Information technology — Generic coding of moving pictures and associated audio information —   free
13818-              Part 7: Advanced Audio Coding (AAC) — Technical Corrigendum 2
7:2006/Cor
2:2010

ISO/IEC         *   Information technology — Coding of audio-visual objects — Part 20: Lightweight Application      free
14496-              Scene Representation (LASeR) and Simple Aggregation Format (SAF) — Technical Corrigendum
20:2008/Cor         1
1:2010

ISO/IEC         *   Information technology — Coding of audio-visual objects — Part 22: Open Font Format —           XZ
14496-              Amendment 1: Support for many-to-one range mappings
22:2009/Amd
1:2010

ISO/IEC         *   Information technology — Coding of audio-visual objects — Part 22: Open Font Format —           free
14496-              Technical Corrigendum 1
22:2009/Cor
1:2010

ISO/IEC         *   Information technology — Multimedia application format (MPEG-A) — Part 6: Professional          free
23000-              archiv al application format — Technical Corrigendum 1
6:2009/Cor
1:2010

ISO/IEC         *   Information technology — MPEG audio technologies — Part 1: MPEG Surround — Technical            free
23003-              Corrigendum 3
1:2007/Cor
3:2010
ISO/IEC           *   Information technology — MPEG extensible middlew are (MXM) — Part 4: MXM protocols              X
23006-4:2010

ISO/IEC           *   Information technology — JPSearch — Part 4: File format for metadata embedded in image data     D
24800-4:2010          (JPEG and JPEG 2000)

ISO/IEC               Information technology — Automatic identif ication and data capture techniques — Bar code       R
15423:2009            scanner and decoder performance testing

ISO/IEC           *   Information technology — Radio frequency identific ation for item management — Part 3:        XC
18000-3:2010          Parameters for air interface communications at 13,56 MHz

ISO/IEC           *   Information technology — Radio frequency identific ation for item management — Part 6:        XG
18000-6:2010          Parameters for air interface communications at 860 MHz to 960 MHz

ISO/IEC           *   Information technology — Topic Maps — Part 6: Compact syntax                                    G
13250-6:2010

ISO/IEC           *   Information technology — Conformance testing methodology for biometric data interchange       free
29109-                formats defined in ISO/IEC 19794 — Part 1: Generalized conformance testing methodology —
1:2009/Cor            Technical Corrigendum 1
1:2010




Standards confirmed

The follow ing International Standards are confimred for a fiv e year period:



IIW                   International Institute of Welding

ISO 10447:2006

ISO 14323:2006

ISO 14324:2003

ISO 14373:2006

ISO 16432:2006

ISO 16433:2006

ISO/TR
22824:2003

TC 28                 Petroleum products and lubricants

ISO 7278-4:1999

ISO 6743-4:1999       (reconfirmed)

TC 29                 Small tools
ISO 8018:2007

TC 34              Food products

ISO 5549:1978      (reconfirmed)

TC 41              Pulleys and belts (including veebelts)

ISO 3870:1976

ISO 4195:2007

TC 42              Photography

ISO 18909:2006

TC 67              Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
                   industries

ISO 15136-2:2006

TC 150             Implants for surgery

ISO 5835:1991      (reconfirmed)

ISO 5836:1988      (reconfirmed)

ISO 5837-1:1985    (reconfirmed)

ISO 6475:1989      (reconfirmed)

ISO 8615:1991      (reconfirmed)

ISO 8827:1988      (reconfirmed)

ISO 9585:1990      (reconfirmed)

TC 206             Fine ceramics

ISO 20504:2006

ISO 24235:2007

TC 210             Quality management and corresponding general aspects for medical devices

ISO 14971:2007

TC 212             Clinical laboratory testing and in vitro diagnostic test systems

ISO 15190:2003




Standards withdrawn
Period from 01 November to 30 November 2010



TC 5               Ferrous metal pipes and metallic fittings

ISO 10804-1:1996   (replaced by ISO 10804:2010)

TC 8               Ships and marine technology

ISO/PAS            (replaced by ISO 30007:2010)
30007:2010

TC 17              Steel

ISO 16162:2005     (replaced by ISO 16162:2010)

ISO 16163:2005     (replaced by ISO 16163:2010)

TC 22              Road vehicles

ISO 12021-1:1996   (replaced by ISO 12021:2010)

TC 28              Petroleum products and lubricants

ISO 4404-2:2003    (replaced by ISO 4404-2:2010)

TC 31              Tyres, rims and valves

ISO 4249-3:2004    (replaced by ISO 4249-3:2010)

ISO 5751-1:2004    (replaced by ISO 5751-1:2010)

ISO 5751-2:2004    (replaced by ISO 5751-2:2010)

ISO 5751-3:2004    (replaced by ISO 5751-3:2010)

TC 34              Food products

ISO 520:1977       (replaced by ISO 520:2010)

ISO 6731:1989      (replaced by ISO 6731:2010)

ISO 6734:1989      (replaced by ISO 6734:2010)

TC 43              Acoustics

ISO 3746:1995      (replaced by ISO 3746:2010)

ISO 3747:2000      (replaced by ISO 3747:2010)

TC 61              Plastics

ISO 11337:2004     (replaced by ISO 11337:2010)

ISO 4611:2008      (replaced by ISO 4611:2010)

ISO 15064:2004     (replaced by ISO 15064:2010)

ISO 10352:1997     (replaced by ISO 10352:2010)

TC 67              Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
                   industries

ISO 13678:2009     (replaced by ISO 13678:2010)

TC 70              Internal combustion engines

ISO 7967-2:1987    (replaced by ISO 7967-2:2010)
ISO 7967-          (replaced by ISO 7967-2:2010)
2:1987/Amd
1:1999

TC 107             Metallic and other inorganic coatings

ISO 4534:1980      (replaced by ISO 4534:2010)

ISO 14921:2001     (replaced by ISO 14921:2010)

ISO 28762:2008     (replaced by ISO 28762:2010)

ISO 9717:1990      (replaced by ISO 9717:2010)

TC 113             Hydrometry

ISO 1100-2:1998    (replaced by ISO 1100-2:2010)

ISO 2425:1999      (replaced by ISO 2425:2010)

ISO                (replaced by ISO 2425:2010)
2425:1999/Amd
1:2003

TC 130             Graphic technology

ISO 15076-1:2005   (replaced by ISO 15076-1:2010)

TC 131             Fluid power systems

ISO 4413:1998      (replaced by ISO 4413:2010)

ISO 4414:1998      (replaced by ISO 4414:2010)

TC 138             Plastics pipes, fittings and valves for the transport of fluids

ISO 14531-3:2006   (replaced by ISO 14531-3:2010)

TC 184             Automation systems and integration

ISO/TS 10303-      (replaced by ISO/TS 10303-1676:2010)
1676:2006

ISO/TS 10303-      (replaced by ISO/TS 10303-1743:2010)
1743:2006

ISO/TS 22745-      (replaced by ISO 22745-13:2010)
13:2009

TC 215             Health informatics

ISO/TS             (replaced by ISO 21667:2010)
21667:2004

JTC 1              Information technology

ISO/IEC 9798-      (replaced by ISO/IEC 9798-6:2010)
6:2005

ISO/IEC 11770-     (replaced by ISO/IEC 11770-1:2010)
1:1996

ISO/IEC 29116-     (replaced by ISO/IEC 23006-4:2010)
1:2008

ISO/IEC 18000-     (replaced by ISO/IEC 18000-3:2010)
3:2008

ISO/IEC 18000-     (replaced by ISO/IEC 18000-6:2010)
6:2004
ISO/IEC 18000-           (replaced by ISO/IEC 18000-6:2010)
6:2004/Amd
1:2006




Meeting calendar

(update at 01 November 2010)

Meetings called for the month of October are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional



November-December 2010

29-3    Bangkok                   TC 223        Societal Security
        (Thailand)

December 2010

2       London (United            TC 138/SC 6   Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes
        Kingdom)                                and fittings for all applications

2-3     Kuala Lumpur              TC 206        Fine ceramics
        (Malaysia)

3       Winterthur                JTC 1/SC 23   Information technology/Digitally Recorded Media for Information Interchange and
        (Sw itzerland)                          Storage

3       Delft                     TC 98         Bases for design of structures
        (Netherlands)

6-10    Kuala Lumpur              TC 229        Nanotechnologies
        (Malaysia)

9       Miami ( USA)              TC 44/SC 6    Welding and allied processes/Resis tance welding and allied mechanical joining

9-10    Beijing (China)           TC 93         Starch (including derivatives and by-products)

9-10    Canberra                  TC 211        Geographic information/Geomatics
        (Australia)

13-17 Sydney                      TC 176/SC 2   Quality management and quality assurance/Quality systems
      (Australia)

Month unknown 2010

        (Asia)                ** JTC 1/SC 24    Information technology/Computer graphics, image processing and environmental data
                                                representation

January 2011

10-11 Oxford (United          *   TC 37/SC 4    Terminology and other language and content resources/Language resource
       Kingdom)                             management

11-12 Singapore               TC 67/SC 7    Materials, equipment and offshore structures for petroleum, petrochemical and natural
      (Singapore)                           gas industries/Offshore structures

17-21 Winterthur          *   TC 121/SC 3   Anaesthetic and respiratory equipment/Lung ventilators and related equipment
      (Sw itzerland)

17-21 Orlando (USA)           TC 121/SC 6   Anaesthetic and respiratory equipment/Medical gas systems

18     Tokyo (Japan)          TC 44/SC 12   Welding and allied processes/Soldering materials

20-21 Moscow                  TC 254        Safety of attractions
      (Russian
      Federation)

27     Las Vegas              TC 86/SC 6    Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat
       (USA)                                pumps

       Paris (France)     ** TC 213         Dimensional and geometrical product specif ications and verif ication

February 2011

7-8    Milan (Italy)          TC 44/SC 8    Welding and allied processes/Equipment for gas welding, cutting and allied processes

7-11   Melbourne              TC 121/SC 2   Anaesthetic and respiratory equipment/Airways and related equipment
       (Australia)

7-11   Melbourne              TC 121/SC 3   Anaesthetic and respiratory equipment/Lung ventilators and related equipment
       (Australia)

9      Paris (France)     *   TC 213        Dimensional and geometrical product specif ications and verif ication

16-17 Stockholm           *   TC 17/SC 20   Steel/General technical delivery conditions, sampling and mechanical testing methods
      (Sweden)

17     Hamburg            ** TC 8/SC 8      Ships and marine technology/Ship design
       (Germany)

18     (USA)              ** TC 154         Processes, data elements and documents in commerce, industry and administration

21-22 Bangalore (India)   ** TC 34/SC 15    Food products/Coffee

21-25 Seattle (USA)       ** JTC 1/SC 35    Information technology/User interfaces

21-25 Osaka (Japan)           TC 107        Metallic and other inorganic coatings

23     Paris (France)     *   TC 23/SC 2    Tractors and machinery for agriculture and forestry/Common tests

23-24 Geneva              *   TMB           Technical Management Board
      (Sw itzerland)

February-March 2011

28-4   Berlin (Germany)       TC 58/SC 4    Gas cylinders/Operational requirements for gas cylinders

28-4   Melbourne              TC 251        Project committee: Asset management
       (Australia)

March 2011

1-3    Atlanta (USA)      *   JTC 2         Joint Project Committee - Energy efficiency and renewable energy sources - Common
                                            terminology

7-8    Berlin (Germany)       TC 1          Screw threads

12-18 Strasbourg          *   JTC 1/SC 36   Information technology/Information technology for learning, education and training
      (France)
15-16 Geneva              ** COUNCIL        Council
      (Sw itzerland)

17-18 Geneva              *   COUNCIL       Council
      (Sw itzerland)

18-19 Tokyo (Japan)       *   TC 219        Floor coverings

21-25 Milan (Italy)           TC 118/SC 1   Compressors and pneumatic tools, machines and equipment/Process compressors

24     Milan (Italy)          TC 118/SC 3   Compressors and pneumatic tools, machines and equipment/Pneumatic tools and
                                            machines

24     Milan (Italy)          TC 118/SC 4   Compressors and pneumatic tools, machines and equipment/Compressed air purity
                                            specif ication and compressed air treatment equipment

24     Milan (Italy)          TC 118/SC 6   Compressors and pneumatic tools, machines and equipment/Air compressors and
                                            compressed air systems

25     Milan (Italy)          TC 118        Compressors and pneumatic tools, machines and equipment

29     Berlin (Germany)       TC 117        Fans

April 2011

3-8    Paris (France)     ** TC 92/SC 3     Fire safety/Fire threat to people and environment

3-8    Berlin (Germany)   *   TC 127        Earth-moving machinery

4      Stuttgart          ** TC 161         Control and protectiv e devic es for gas and/or oil burners and appliances
       (Germany)

4-5    Madrid (Spain)     *   TC 34/SC 11   Food products/Animal and vegetable fats and oils

4-8    London (United     *   TC 43         Acoustic s
       Kingdom)

4-8    London (United     *   TC 43/SC 1    Acoustic s/Noise
       Kingdom)

4-8    London (United     *   TC 43/SC 2    Acoustic s/Building acoustics
       Kingdom)

4-8    (Netherlands)      ** TC 153/SC 1    Valves/Design, manufacture, marking and testing

8      Paris (France)         TC 92         Fire safety

8      (Italy)            ** TC 228         Tourism and related services

11-16 Berlin (Germany)    ** TC 130         Graphic technology

13-14 Dresden             *   TC 199        Safety of machinery
      (Germany)

13-15 (Europe)            ** TC 23/SC 7     Tractors and machinery for agriculture and forestry/Equipment for harvesting and
                                            conservation

15     Tokyo (Japan)          TC 210        Quality management and corresponding general aspects for medical devices

15-30 Madrid (Spain)      ** TC 34/SC 2     Food products/Oleaginous seeds and fruits and oilseed meals

26-29 Niagara Falls       *   TC 85/SC 2    Nuclear energy, nuclear technologies, and radiological protection/Radiological
      (Canada)                              protection

       (Unknow n)         ** TC 84          Devices for administration of medicinal products and intravascular catheters

May 2011

2-6    Sydney             *   TC 46         Information and documentation
       (Australia)

3-4    Paris (France)      *   TC 44/SC 3    Welding and allied processes/Welding consumables

7-10   (Netherlands)       ** TC 68/SC 4     Financial services/Securities and related financial instruments

9-13   Berlin (Germany)    ** TC 114         Horology

12     Amsterdam           ** TC 68          Financial services
       (Netherlands)

12-13 Vienna (Austria)     *   TC 253        Project committee: Treated w astewater re-use for irrigation

15     Zurich              ** TC 39/SC 2     Machine tools/Test conditions for metal cutting machine tools
       (Sw itzerland)

16-17 Bratislava           *   TC 44/SC 11   Welding and allied processes/Qualific ation requirements for welding and allied
      (Slovakia)                             processes personnel

16-18 Frankfurt            *   TC 214        Elevating w ork platforms
      (Germany)

16-20 Stockholm            *   TC 156        Corrosion of metals and alloys
      (Sweden)

18-19 Pau (France)         ** TC 67/SC 2     Materials, equipment and offshore structures for petroleum, petrochemical and natural
                                             gas industries/Pipeline transportation systems

22-27 Portland, Oregon     *   TC 184/SC 4   Automation systems and integration/Industrial data
      (USA)

23-24 Stavanger            ** TC 67/SC 4     Materials, equipment and offshore structures for petroleum, petrochemical and natural
      (Norway)                               gas industries/Drilling and production equipment

23-25 Stockholm            *   TC 29/SC 2    Small tools/High speed steel cutting tools and their attachments
      (Sweden)

23-27 La Plaine St-        *   TC 6          Paper, board and pulps
      Denis (France)

23-27 Chicago (USA)        ** TC 23/SC 6     Tractors and machinery for agriculture and forestry/Equipment for crop protection

23-27 Stockholm            *   TC 29         Small tools
      (Sweden)

23-27 Stockholm            *   TC 29/SC 9    Small tools/Tools w ith cutting edges made of hard cutting materials
      (Sweden)

23-27 Salt Lake City       ** TC 171         Document management applications
      (USA)

23-27 Kuopio (Finland)     *   TC 215        Health informatics

23-28 Jeju (Korea,         *   TC 147        Water quality
      Republic of)

25-31 St. Petersburg       ** TC 67/SC 5     Materials, equipment and offshore structures for petroleum, petrochemical and natural
      (Russian                               gas industries/Casing, tubing and drill pipe
      Federation)

26-27 Delft                *   TC 211        Geographic information/Geomatics
      (Netherlands)

       Porto de            ** TC 135/SC 9    Non-destructive testing/Acoustic emission testing
       Galinhas (Brazil)

May-June 2011

30-4   Pretoria (South         TC 96         Cranes
       Afric a)
30-4   Pretoria (South        TC 96/SC 3   Cranes/Selection of wire ropes
       Afric a)

30-4   Pretoria (South        TC 96/SC 6   Cranes/Mobile cranes
       Afric a)

30-4   Pretoria (South        TC 96/SC 8   Cranes/Jib cranes
       Afric a)

June 2011

6-9    (Austria)          ** TC 145        Graphical symbols

10     Vancouver          ** TC 192        Gas turbines
       (Canada)

12-17 Seoul (Korea,       ** TC 37         Terminology and other language and content resources
      Republic of)

13-17 Brussels            *   TC 4         Rolling bearings
      (Belgium)

13-17 Tokyo (Japan)       *   TC 69        Applications of statis tical methods

13-17 Vancouver           ** TC 121        Anaesthetic and respiratory equipment
      (Canada)

13-17 Vancouver           ** TC 121/SC 6   Anaesthetic and respiratory equipment/Medical gas systems
      (Canada)

14-15 Geneva              *   TMB          Technical Management Board
      (Sw itzerland)

15     Stockholm          *   TC 29/SC 5   Small tools/Grinding w heels and abrasives
       (Sweden)

20-24 (USA)               ** JTC 1/SC 6    Information technology/Telecommunications and information exchange between
                                           systems

20-24 Bournemouth         ** TC 34/SC 9    Food products/Microbiology
      (United
      Kingdom)

26-30 Hollyw ood,         *   TC 85/SC 6   Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
      Florida (USA)

29-30 London (United      ** TC 29/SC 10   Small tools/Assembly tools for screws and nuts, pliers and nippers
      Kingdom)

       San Francisco      ** TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural
       (USA)                               gas industries/Drilling and completion fluids, and well cements

       Hong Kong          ** TC 71         Concrete, reinforced concrete and pre-stressed concrete
       (Hong Kong,
       China)

       (South Africa)     ** TC 137        Footw ear siz ing designations and marking systems

June-July 2011

27-1   Berlin (Germany)       TC 94/SC 6   Personal safety -- Protective clothing and equipment/Eye and face protection

27-1   Paris (France)     ** TC 188        Small craft

2nd Quarter 2011

       Prague (Czech      ** TC 204        Intelligent transport systems
       Republic)
       (USA)              ** TC 226         Materials for the production of primary aluminium

July 2011

11-15 Delft               *   REMCO         Committee on reference materials
      (Netherlands)

24     Turin (Italy)      *   JTC 1/SC 29   Information technology/Coding of audio, picture, multimedia and hypermedia
                                            information

August 2011

       (Sweden)           ** JTC 1/SC 35    Information technology/User interfaces

September 2011

9-15   Chicago (USA)      ** TC 163         Thermal performance and energy use in the built environment

12-14 Chicago (USA)       *   TC 205        Building environment design

12-16 Vienna (Austria)    *   TC 108/SC 4   Mechanical vibration, shock and condition monitoring/Human exposure to mechanical
                                            vibration and shock

12-16 Florianopolis       ** TC 150         Implants for surgery
      (Brazil)

12-16 Florianopolis       *   TC 150/SC 1   Implants for surgery/Materials
      (Brazil)

12-16 Adelaide            *   TC 190        Soil quality
      (Australia)

12-16 Rotorua (New        *   TC 218        Timber
      Zealand)

13-15 Moscow              *   TC 67         Materials, equipment and offshore structures for petroleum, petrochemical and natural
      (Russian                              gas industries
      Federation)

15-17 (Italy)             ** TC 201         Surface chemical analysis

18-24 Paris (France)      *   TC 164        Mechanical testing of metals

19     Chicago (USA)      *   TC 21/SC 3    Equipment for fire protection and fire fighting/Fire detection and alarm systems

19     Chicago (USA)      *   TC 21/SC 11   Equipment for fire protection and fire fighting/Smoke and heat control systems and
                                            components

19-20 Paris (France)      *   TC 164/SC 3   Mechanical testing of metals/Hardness testing

19-20 New Delhi (India)   *   TMB           Technical Management Board

19-22 Paris (France)      *   TC 164/SC 4   Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum ( P), Tear
                                            (T)

19-23 Bali (Indonesia)    *   TC 165        Timber structures

19-23 Adelaide            *   TC 190/SC 1   Soil quality/Evaluation of criteria, terminology and codific ation
      (Australia)

19-23 Adelaide            *   TC 190/SC 3   Soil quality/Chemical methods and soil characteristics
      (Australia)

19-23 Adelaide            *   TC 190/SC 4   Soil quality/Biological methods
      (Australia)

19-23 Adelaide            *   TC 190/SC 7   Soil quality/Soil and site assessment
      (Australia)
20     Berlin (Germany)    *   TC 29/SC 8    Small tools/Tools for pressing and moulding

20-22 Paris (France)       *   TC 164/SC 5   Mechanical testing of metals/Fatigue testing

20-23 Washington, D.C      ** TC 172/SC 5    Optics and photonic s/Microscopes and endoscopes
      (USA)

21     Chicago (USA)       *   TC 21/SC 2    Equipment for fire protection and fire fighting/Manually transportable fire extinguishers

21     Paris (France)      *   TC 164/SC 2   Mechanical testing of metals/Ductility testing

21-22 Chicago (USA)        *   TC 21/SC 8    Equipment for fire protection and fire fighting/Gaseous media and firefighting systems
                                             using gas

22-23 Paris (France)       *   TC 164/SC 1   Mechanical testing of metals/Uniaxial testing

23     Chicago (USA)       *   TC 21         Equipment for fire protection and fire fighting

23     Sao Paulo           *   TC 142        Cleaning equipment for air and other gases
       (Brazil)

24     New Delhi (India)   *   COUNCIL       Council

29-30 (Unknow n)           ** TC 44          Welding and allied processes

       Shanghai            ** JTC 1/SC 36    Information technology/Information technology for learning, education and training
       (China)

       Chicago (USA)       ** TC 21/SC 3     Equipment for fire protection and fire fighting/Fire detection and alarm systems

       Chicago (USA)       ** TC 21/SC 6     Equipment for fire protection and fire fighting/Foam and powder media and fix ed
                                             firefighting systems using foam and powder

       (Unknow n)          ** TC 44/SC 9     Welding and allied processes/Health and safety

       (France)            ** TC 59/SC 8     Buildings and civil engineering works/Sealants

       (Malaysia)          ** TC 61/SC 4     Plastics/Burning behaviour

       Beijing (China)     ** TC 213         Dimensional and geometrical product specif ications and verif ication

3rd Quarter 2011

       (USA)               ** TC 34/SC 16    Food products/Horizontal methods for molecular biomarker analysis

       (United             ** TC 41/SC 1     Pulleys and belts (including veebelts)/Fric tion
       Kingdom)

       (United             ** TC 41/SC 3     Pulleys and belts (including veebelts)/Conveyor belts
       Kingdom)

       (United             ** TC 41/SC 4     Pulleys and belts (including veebelts)/Synchronous belt drives
       Kingdom)

       Mexico (Mexico)     ** TC 253         Project committee: Treated w astewater re-use for irrigation

October 2011

3-7    Sydney              *   TC 89         Wood-based panels
       (Australia)

3-7    London (United      *   TC 146/SC 2   Air quality/Workplace atmospheres
       Kingdom)

6-7    Geneva              *   CASCO         Committee on conformity assessment
       (Sw itzerland)

10-14 (Unknow n)           ** TC 25          Cast irons and pig irons
10-14 (Japan)             ** TC 34/SC 17    Food products/Management systems for food safety

10-14 Nanjing (China)     ** TC 193/SC 1    Natural gas/Analy sis of natural gas

16-21 Suzhou (China)      *   TC 184/SC 4   Automation systems and integration/Industrial data

17-19 Tokyo (Japan)       *   TC 5/SC 2     Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints

17-20 Yokohama            *   TC 45/SC 2    Rubber and rubber products/Testing and analysis
      (Japan)

18-20 London (United      *   TC 202        Microbeam analysis
      Kingdom)

24-28 Moscow              ** TC 178         Lifts, escalators and moving walks
      (Russian
      Federation)

25-28 Amsterdam           ** TC 138/SC 1    Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
      (Netherlands)                         for soil, waste and drainage (including land drainage)

26     Amsterdam          ** TC 138/SC 4    Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
       (Netherlands)                        for the supply of gaseous fuels

       (Korea, Republic   ** JTC 1/SC 17    Information technology/Cards and personal identific ation
       of)

       London (United     ** TC 59/SC 15    Buildings and civil engineering works/Performance criteria for single family attached
       Kingdom)                             and detached dwellings

       (China)            ** TC 111         Round steel link chains, chain slings, components and accessories

       (China)            ** TC 111/SC 1    Round steel link chains, chain slings, components and accessories/Chains and chain
                                            slings

       (China)            ** TC 111/SC 3    Round steel link chains, chain slings, components and accessories/Components and
                                            accessories

       Vienna (Austria)   ** TC 146/SC 1    Air quality/Stationary source emissions

October-November 2011

31-3   London (United     ** TC 46/SC 11    Information and documentation/Archives/records management
       Kingdom)

November 2011

4      Cincinnati (USA)   *   TC 60         Gears

7-11   Osaka (Japan)      ** TC 94/SC 13    Personal safety -- Protective clothing and equipment/Protective clothing

7-12   (USA)              *   JTC 1         Information technology

11     Venice (Italy)     *   TC 227        Springs

21-22 Berlin (Germany)    *   TC 44/SC 8    Welding and allied processes/Equipment for gas welding, cutting and allied processes

       (Unknow n)         ** TC 34/SC 7     Food products/Spices, culinary herbs and condiments

       (Japan)            ** TC 38          Textiles

       (Japan)            ** TC 38/SC 24    Textiles/Conditioning atmospheres and physical tests for textile fabrics

       Pau (France)       ** TC 67/SC 3     Materials, equipment and offshore structures for petroleum, petrochemical and natural
                                            gas industries/Drilling and completion fluids, and well cements

       (Thailand)         ** TC 123         Plain bearings
       (Thailand)         ** TC 123/SC 2   Plain bearings/Materials and lubricants, their properties, characteristics, test methods
                                           and testing conditions

       (Thailand)         ** TC 123/SC 3   Plain bearings/Dimensions, tolerances and construction details

       (Thailand)         ** TC 123/SC 5   Plain bearings/Quality analysis and assurance

       (Thailand)         ** TC 123/SC 6   Plain bearings/Terms and common items

       (Thailand)         ** TC 123/SC 7   Plain bearings/Special types of plain bearings

4th Quarter 2011

       (USA)              ** TC 30/SC 7    Measurement of fluid flow in closed conduits/Volume methods including w ater meters

       (Japan)            ** TC 172/SC 3   Optics and photonic s/Optical materials and components

       (South Africa)     ** TC 211        Geographic information/Geomatics

2nd Semester 2011

       Tokyo (Japan)      ** TC 130        Graphic technology

Month unknown 2011

       (North America)    ** JTC 1/SC 24   Information technology/Computer graphics, image processing and environmental data
                                           representation

       Edinburgh          ** TC 24/SC 4    Particle characterization including sieving/Particle characterization
       (United
       Kingdom)

       Kyoto (Japan)      ** TC 33         Refractories

       (Netherlands)      ** TC 138        Plastics pipes, fittings and valves for the transport of fluids

       (Unknow n)         ** TC 146/SC 6   Air quality/Indoor air

       (France)           ** TC 206        Fine ceramics

January 2012

       Charlotte (USA)    ** TC 213        Dimensional and geometrical product specif ications and verif ication

February 2012

22-23 Geneva              *   TMB          Technical Management Board
      (Sw itzerland)

       (Korea, Republic   ** JTC 1/SC 35   Information technology/User interfaces
       of)

       Florida (USA)      ** TC 115        Pumps

March 2012

29     (Unknow n)         ** TC 23/SC 19   Tractors and machinery for agriculture and forestry/Agricultural electronics

       (China)            ** JTC 1/SC 6    Information technology/Telecommunications and information exchange between
                                           systems

       (Australia)        ** JTC 1/SC 36   Information technology/Information technology for learning, education and training

       (Korea, Republic   ** JTC 1/SC 36   Information technology/Information technology for learning, education and training
       of)
       (Italy)            ** TC 172/SC 7   Optics and photonic s/Ophthalmic optics and instruments

April 2012

       Bern               ** TC 113        Hydrometry
       (Sw itzerland)

       Durban (South      ** TC 135        Non-destructive testing
       Afric a)

       Durban (South      ** TC 135/SC 3   Non-destructive testing/Ultrasonic testing
       Afric a)

       Durban (South      ** TC 135/SC 5   Non-destructive testing/Radiation methods
       Afric a)

May 2012

7-11   Berlin (Germany)   ** TC 46         Information and documentation

10     Chicago (USA)      ** TC 68         Financial services

       (Unknow n)         ** TC 126        Tobacco and tobacco products

June 2012

13-14 Geneva              *   TMB          Technical Management Board
      (Sw itzerland)

       Calgary            ** TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural
       (Canada)                            gas industries/Drilling and completion fluids, and well cements

2nd Quarter 2012

       (France)           ** TC 211        Geographic information/Geomatics

September 2012

3-8    Zurich             ** TC 142        Cleaning equipment for air and other gases
       (Sw itzerland)

19-21 San Diego (USA)     ** GA            General Assembly

22     San Diego (USA)    ** COUNCIL       Council

       Cadiz (Spain)      ** TC 213        Dimensional and geometrical product specif ications and verif ication

October 2012

24     Sydney             ** TC 138/SC 4   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
       (Australia)                         for the supply of gaseous fuels

4th Quarter 2012

       (Saudi Arabia)     ** TC 211        Geographic information/Geomatics

Month unknown 2012

       (Europe)           ** JTC 1/SC 24   Information technology/Computer graphics, image processing and environmental data
                                           representation

       Vienna (Austria)   ** REMCO         Committee on reference materials

       Delft              ** TC 23/SC 6    Tractors and machinery for agriculture and forestry/Equipment for crop protection
       (Netherlands)

       (Unknow n)         ** TC 34         Food products
     (USA)              ** TC 44         Welding and allied processes

     Chicago (USA)      ** TC 68/SC 4    Financial services/Securities and related financial instruments

     (South Africa)     ** TC 102        Iron ore and direct reduced iron

     Berlin (Germany)   ** TC 107        Metallic and other inorganic coatings

     Sydney             ** TC 138        Plastics pipes, fittings and valves for the transport of fluids
     (Australia)

     Sydney             ** TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
     (Australia)                         for soil, waste and drainage (including land drainage)

     (Unknow n)         ** TC 146        Air quality

     (Brazil)           ** TC 164        Mechanical testing of metals

     (Finland)          ** TC 190        Soil quality

     (China)            ** TC 202        Microbeam analysis

     (France)           ** TC 205        Building environment design

     (Thailand)         ** TC 207        Environmental management

March 2013

     (Kenya)            ** JTC 1/SC 36   Information technology/Information technology for learning, education and training

September 2013

     (Korea, Republic   ** TC 123/SC 2   Plain bearings/Materials and lubricants, their properties, characteristics, test methods
     of)                                 and testing conditions

     (Korea, Republic   ** TC 123/SC 3   Plain bearings/Dimensions, tolerances and construction details
     of)

     (Korea, Republic   ** TC 123/SC 5   Plain bearings/Quality analysis and assurance
     of)

     (Korea, Republic   ** TC 123/SC 6   Plain bearings/Terms and common items
     of)

     (Korea, Republic   ** TC 123/SC 7   Plain bearings/Special types of plain bearings
     of)

     Tokyo (Japan)      ** TC 142        Cleaning equipment for air and other gases

October 2013

     Mexico (Mexico)    ** TC 113        Hydrometry

Month unknown 2013

     (USA)              ** REMCO         Committee on reference materials

     (Norway)           ** TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
                                         for soil, waste and drainage (including land drainage)

Month unknown 2014

     (USA)              ** TC 142        Cleaning equipment for air and other gases

Month unknown 2015
London (United   ** TC 142   Cleaning equipment for air and other gases
Kingdom)

								
To top