Docstoc

moto V3

Document Sample
moto V3 Powered By Docstoc
					Network Integration and Change Control Motorola V3 Manual Settings
WAP Over CSD Configurations
1. Go to Menu

WebAccess

Web Sessions

[New Entry].

Enter details for the following parameters. Name: myGlobe CSD Homepage: http://www.globe.com.ph/globe.asp Service Type 1: WAP Gateway IP 1: 192.9.163.34 Port 1: 9201 CSD No. 1: +639172399 User Name 1: globe Password 1: globe Speed (Bps) 1: 9600 Line type 1: ISDN 2. Select myGlobe CSD, press then select Set Default.

WAP Over GPRS Configurations
1. Go to Menu

WebAccess

Web Sessions

[New Entry].

Enter details for the following parameters. Name: myGlobe GPRS Homepage: http://www.globe.com.ph/globe.asp Service Type 1: WAP Gateway IP 1: 203.177.42.214 Port1: 9201 GPRS APN: www.globe.com.ph 2. Select myGlobe GPRS, press then select Set Default.

MMS Configurations
1. Go to Menu

WebAccess

Web Sessions

[New Entry].

Enter details for the following parameters. Name: myGlobe MMS Gateway IP 1: 192.40.100.20 GPRS APN: mms.globe.com.ph 2. Go to Menu

Messages

Press

Message Setup

MMS Message Setup

Server info

Press

New.

Enter details for the following parameters. Server Name: myGlobe MMS Server Name: http://192.40.100.22:10021/mmsc Web Session: myGlobe MMS

3.

Rename the profile to myGlobe MMS then select Activate to set as the default setting.

MOTOROLA V3 Internet Settings
1. 2. Insert the Motorola Internet Manager CDROM to the CD Drive. Installation will start automatically. If not, go to Windows Explorer and double click install. Follow all instruction prompted in the screen. After the Internet Manager has been installed, Fig. 1 will appear automatically. Click the upper icon on the right side as shown below. (Click here)

Fig. 1 3. A dialog box will open to start the Internet set up. Refer to Fig. 2.

Fig. 2 4. Click Next. Click on Create a new connection then click Next. Refer to Fig. 3.

Fig. 3

5. Under Connection name enter myGlobe Internet, Country or Region Philippines and Service Provider Globe then click Next. Refer to Fig. 4

Fig. 4 6. Under Select the connection type you want to set up, click myGlobe Internet then check on Use default parameters, then click Next. Refer to Fig. 5.

Fig. 5 7. The following parameters will appear, then click Finish to complete the Internet set up. Refer to Fig. 6

Fig. 6


				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:58
posted:6/27/2009
language:English
pages:3