How to Fix Common Printer Error Codes for Brother Multifunction Printers by gyvwpsjkko


									?Have you ever encountered a printer error code while using your Brother
multifunction printer? Chances are that you have. It is not that the Brother
multifunction printer is an inferior machine; in fact, it is one of the best multifunction
printers out there. But just like any machine, it can bog down. And when it does, a
printer error code might pop up on your computer screen or on the LCD control panel
of the printer.

What are the common printer error codes of Brother multifunction printers and how
can we fix them? Here is a list of these common printer error codes.

? Error Code S05. A printer error code like this happens when the transfer of data via
the parallel port is not going smoothly. Just reset your printer to get it going again.

? Error Code E50. This printer error code flashes when the fuser unit of your Brother
multifunction printer gets damaged. When this happens, it is a signal that you must
replace your printer's fuser unit.

? Error Code E51. When the printer's laser beam, lid or mirrors are not placed in their
appropriate positions, it results in this printer error code. Please check if ink cartridges
and everything in your printer is where it should be before you start using it again.

? Black pages. Sometimes, the message "Black pages" can flash on the screen, or a
black page is actually being printed out. In this case, you would need to take your
printer to a service center and replace its jumper wires and diodes.

? Check paper path. When this message shows up, it means that your Brother printer
has a dirty or misaligned eject roller. Clean it or straighten it up, whichever is
necessary, and then try printing again.

? Poor quality of copy. When the output of your Brother multifunction printer, be it
the printout or the fax, is smudgy, it could be because the scanning mirrors or the
glass is dirty. Clean them up if they are. However, if these are clean, then the problem
could be your printer's camera. You can try out unplugging your printer for a few
hours, but if the problem persists, you may have to go to a service center to get your
printer's camera replaced.

James Kara Murat the contributor of compatible ink cartridges. More information on
the subject is at How to Fix Common Printer Error Codes for Brother Multifunction
Printers, and related resources can be found at Brother Ink Cartridges.

To top