Docstoc

SNAP ON 3000

Document Sample
SNAP ON 3000 Powered By Docstoc
					                                              SNAP ON 3000




SNAP ON 3000 HINGE SERIES




Strength, functionality and reliability –
SNAP ON 3000 is synonymous with durability.
Snap On 3000
Design solutions to meet every application




Snap On 3000 proven technology with a wide                   Snap On 3000 with UniSoft or Soft-close Pin.
selection of application possibilities.                      When the UniSoft door adapter or Soft-close Pin is used
The Snap On 3000 series is designed for a wide range         in conjunction with Snap On 3000 applications, loud
of door applications in the kitchen, bath and living room    door slamming during closure becomes a thing of the
environments. Sturdy, reliable hinges for constant daily     past. The door is gently braked and closes smoothly
use provide a well-rounded program. In this hinge            without a sound.
series, all individual load-bearing parts like pivot pins,
linkages, springs and screws are hardened and nickel-
plated. Snap On 3000 offers hinges for special
applications such as corner cabinets or blind corner
applications. Hinge fastening to the base mounting           Snap On 3000 Multi Lock
plate is based on the reliable Snap On technology. The       Convenient rapid assembly with simple
hinge is positioned on the base plate and simply             installation and removal.
snapped into place. Installation and removal can be          Snap On 3000 hinges with Multi Lock installation
performed entirely without tools. Three dimensional          technology are mounted to the door quickly and
adjustment is integrated into the hinge arm and a single     securely. A quarter turn of the screws clockwise
screw is used for any desired adjustment.                    expands and locks the 8mm dowels. The installation
                                                             technology is ideal for CNC-based manufacturers.




                                                                                                                       3
Snap On 3000
Product overview


    Opening angle   Drill hole     Description                        Full overlay   Half overlay   Inset   Page



                                  Technical Information                                                      6




      3703/3704                  For standard doors                                                          8
                                 • Up to 24mm door thickness
      110°
                                 • Self-closing and Free-swinging
                                 • Multi Lock hinge cup
                      35 mm


      3803/3804                  For standard doors                                                          10
                                 • Up to 24mm door thickness
      120°
                                 • Self-closing
                                 • Multi Lock hinge cup
                      35 mm


      3903/3904                  For wide angle doors                                                        12
                                 • Up to 22mm door thickness
      165°
                                 • Zero protrusion
                                 • Self-closing and Free-swinging
                     35 mm       • Multi Lock hinge cup


      3606/3608                  Thick door hinge                                                            14
                                 • Designed for profiled doors or
      95°
                                   thicker doors
                                 • For door thickness up to 35mm
                     35 mm


      3403/45°                   45° Diagonal corner hinge                                                   16
                                 • For angled corner cabinets
      95°
                                 • Up to 24mm door thickness

                     35 mm


      3203/-45°                  Negative 45° corner hinge                                                   18
                                 • For angled corner cabinets
      120°
                                 • Up to 22mm door thickness

                     35 mm


      3303                       Blind corner hinge                                                          20
                                 • For flush mount application
      95°
                                 • Up to 22mm door thickness

                     35 mm


      3503/3505                  Glass door hinge                                                            22
                                 • 30 mm hinge cup
      100°
                                 • For tempered glass thicknesses 4
                                   to 7 mm
                      30 mm




4
Opening angle     Description                    Page




                Snap On Base plates               24
                • Wing plates
                • Straight plates
                • Face Frame adapter plate




                Accessories                       26
                • Spacer for wing base plates
                • Opening angle reduction clip




                Machinery                         30




                                                        5
Technical information
for Snap On 3000

    Recommended number of hinges per door

The number of hinges required depends on the
size and weight of the door. The distance
between the hinges should be spaced as wide
as possible. Use the diagram to determine the
number of hinges needed. These
recommendations are for doors without any
accessory attachments.




                                                                                                                     For doors to 24” wide weighing up to:
                                                                                                                     20 lbs - 2 hinges
                                                                                                                     21 - 40 lbs - 3 hinges
                                                                                                                     41 - 100 lbs - 4 hinges


    Reveal                                                           Full overlay door           Half overlay door                                             Inset door

The reveal (R) is the distance that should be
left between two doors or between the door and
side wall of the cabinet to allow sufficient space
for opening the door. The required reveal width
(R) depends on the thickness of the door.




                                                                                          R                                (2x) R                                                          R


    Required reveal                                                                           Reveal for inset door

The table shows the reveal                             Drilling distance (DD)                 The table shows the mini-                                  Drilling distance (DD)
that should be left between                             3    4   5                            mum reveal for an inset                                     3   4     5
two doors or between door                           16 0.9 0.9 0.9                            door, depending on the                               0.5              1.3
and side wall to allow enough                       18 1.4 1.4 1.4                            drilling distance and base                           1.5        1.3
space for opening the door.                         19 1.9 1.7 1.6                            plate height.                                        2.5 1.3
                                                    20 3.6 2.6 2.0
Example:                                            22 7.1 6.1 5.1                            Example:
For a door thickness of                             24 10.5 9.5 8.5                           A drilling distance of 4mm
                                                                                                                              Minimum reveal (R)




18 mm and a drilling                                                                          results from using a base
distance of 5mm a reveal of                                                                   plate with height 1.3 in a
                                    Door thicknes




1.4mm is needed.                                                                               reveal (R) of 1.5mm. This is
                                                                                              also called negative opening
                                                                        Reveal min. (R)       action.                                                                     Base plate height (BPH)


Note
Reveal dimensions were determined with an edge radius (of the door) of
1mm. Hinge dimensions and calculation of reveal based on factory
setting. We recommend a trial mounting for all hinges and base plates.


                                                                                                Installation in millimeters is required. (Fractional inch equivalents as noted)
6
 Adjustments




                                                     Blind corner hinges
            GRASS




                                                                                                 Height adjustment       Side adjustment                                                Depth adjustment




                                                                                 GRASS
    Standard hinges
                                                                                                      ±2 mm                  ±2 mm                                                          ±2 mm

                                                                                                 All adjustment options are independent of one another.




 Minimum gap – Drilling distance

The minimum gap is the gap be-                                                           Example:                                                                             Drilling Distance (DD)
tween the closed door and the front                                                      For a door thickness of 19 mm and                                                     3    4    5
of the cabinet.                                                                          a drilling distance of 5 mm the
                                                             (factory setting)




                                                                                                                                                                        16 0.5 0.5 0.5
                                                             Minimum gap




                                                                                         minimum gap is 1.7 mm.                                                         18 0.5 0.7 1.2
                                                                                                                                                                        19 0.5 1.2 1.7
The drilling distance is the dis-                                                                                                                                       20 0.9 1.7 2.2
tance between the edge of the door                                                                                                                                      22 1.9 2.7 3.2
and the edge of the cup hole.                                                                                                                                           24 2.9 3.7 4.2
                                                                                                                                                   Door thicknes (DT)
                                                          Drilling distance

                                                         Door overlay
                                                                                                                                                                                              Minimum gap


 Door edge protrusion                                                                    Door overlay

The door edge protrusion is the                                                          The door overlay is that                                 Drilling distance (DD)
amount by which the edge of the                                                          part of the cabinet side wall                               3                  4      5
open door protrudes into the open-                                                       or frame that is covered by                         18                               1.3
ing and varies depending on the                                                          the door.                                           17                         1.3
type of hinge and method of fixing.                                                                                                          16 1.3
It is stated on the respective                                                           Example:                                            15                               4.3
catalogue page and refers to the                                                         For a hinge with a cranking                         14                         4.3
stated base plate for the factory                                                        of 00, a base plate height of                       13 4.3
                                                                                                                         Door overlay max.




setting. It can be changed by                                                            4.3 and a drilling distance                         12                               9.3
changing the height of the base                                                          of 4 mm, the door overlay is                        10                         9.3
plate and operating the lateral        Protrusion                                        14 mm.
adjustment.
                                                                                                                                                                                    Base plate height (BPH)




Subject to technical modifications without notice.
                                                                                                                                                                                                              7
Snap On 3703 / 3704
110° hinge for standard doors

                                                          •   Opening angle 110°
                                                          •   Up to 24mm door thickness
                                                          •   Self-closing and Free-swinging hinges
                                                              available
                                                          •   Integrated 3-dimensional adjustment in
                                                              hinge arm
                                                          •   42mm boring pattern




    Full overlay            Cranking 00                                             Multi Lock (VSM)         Screw-on (VS)             Dowelled (VS8)

                            3703                                                   Item No.                  Item No.                  Item No.               PU
                                                              Self-closing         28989-34                  79839-34                  70039-34               300
                            Hinge cup: steel
                            Hinge arm:                        Free-swinging             -                    11157-34                       -                 300
                            Zinc, nickel-plated



    Cover cap for cranking 00                                                      Item No.                                                                   PU
                            Nickel plastic                                         12351-41                                                                   50
                            Black plastic                                          12350-41                                                                   50
                            Imprinting available upon special request

    Half overlay            Cranking 08                                             Multi Lock (VSM)         Screw-on (VS)             Dowelled (VS8)

                            3704                                                    Item No.                 Item No.                  Item No.                PU
                            Hinge cup: steel                  Self-closing          28990-34                 55411-34                  55413-34                300
                            Hinge arm:                        Free-swinging             -                    55414-34                      -                   300
                            Zinc, nickel-plated




    Cover cap for cranking 08                                                     Item No.                                                                    PU
                            Black plastic                                         55409-41                                                                    50
                            Imprinting available upon special request




                                                                                                                                                  PU = packaging unit

                                                                                       Installation in millimeters is required. (Fractional inch equivalents as noted)
8
                    Full overlay                                                                Half overlay                                                                 Inset



                                                                        BPH                                                                        BPH




                            Drawing with base plate, height 1.3                                                            Drawing with base plate, height 1.3

                            Drilling distance (DD)                                                                         Drilling distance (DD)
                             3    4                 5        6     7                                                        3    4     5     6     7
                      20                                          1.3                                                 11                     1.3
                      19                                    1.3                                                       10               1.3
                      18                   1.3                                                                        9          1.3               4.3
                      17         1.3                              4.3                                                 8    1.3               4.3
                      16 1.3                                4.3                                                       7                4.3
                      15                  4.3                                                                         6          4.3
Door overlay max.




                      14         4.3
                                                                                                  Door overlay max.




                                                                                                                      5 4.3
                      13 4.3                                                                                          4                            9.3
                      12                                          9.3


                                                             Base plate height (BPH)                                                          Base plate height (BPH)


            Minimum gaps                                                                                               Reveal
                                                                 Drilling distance (DD)                                                                                                                             Drilling distance (DD)
The minimum gap is                                                                                                     Note                                                                                          3    4   5    6     7
                                                                  3     4     5   6   7
the gap between                                                                                                        Reveal dimensions were determined with an edge
                                                            16 0.5 0.5 0.5 0.5 0.9                                                                                                                               16 0.9 0.9 0.9 0.9 0.9
the closed door and                                                                                                    radius (of the door) of 1mm.
the front of the                                            18 0.5 0.5 0.5 0.7 1.6                                                                                                                               18 1.5 1.4 1.4 1.3 1.3
cabinet.                                                    19 0.5 0.5 0.5 1.0 2.0                                     Hinge dimensions and calculation of reveal with                                           19 1.7 1.7 1.7 1.6 1.6
                                                                                                                       factory setting.                                                                          20 2.1 2.0 1.9 1.9 1.8
                                                            20 0.5 0.5 0.5 1.4 2.3
                                                            22 0.5 0.5 1.1 2.0 3.0                                                                                                                               22 3.4 2.8 2.7 2.6 2.5
                                                            24 0.5 0.9 1.8 2.7 3.7                                     IMPORTANT                                                                                 24 6.2 5.2 4.2 3.5 3.3
                                                                                                                       To determine the correct application Grass
                                       Door thicknes (DT)




                                                                                                                                                                                            Door thicknes (DT)




                                                                                                                       strongly recommends a trial mounting for all
                                                                                                                       hinges and base plates.



                                                                                  Minimum gap                                                                                                                                      Reveal min. (R)


                    Drilling pattern for Multi Lock                               Drilling pattern for screw-on                              Drilling pattern for dowelled        Cup dimensions
                                                                                                                                                                                min. 12.8




                                                                                                                                                                                                37
                                                                                                                                                                                                                     4




                                                                                                                                                                                                                                                37




                                                                                                                                                                                                                                    57

                                                                                                                                                                                                                     All dimensions in millimeters.

                           Subject to technical modifications without notice.
                                                                                                                                                                                                                                                     9
Snap On 3803 /3804
120° hinge for standard doors

                                                       •   Opening angle 120°
                                                       •   Up to 22mm door thickness
                                                       •   Integrated 3-dimensional adjustment in
                                                           hinge arm
                                                       •   42mm boring pattern




 Full overlay            Cranking 00                                              Multi Lock (VSM)         Screw-on (VS)            Dowelled (VS8)


                         3803                                                     Item No.                Item No.                  Item No.                 PU
                         Hinge cup: steel                  Self-closing           28992-34                79840-34                  70042-34                 300
                         Hinge arm:
                         Zinc, nickel-plated



 Cover cap for cranking 00                                                       Item No.                                                                   PU
                         Nickel plastic                                          12351-41                                                                   50
                         Black plastic                                           12350-41                                                                   50
                         Imprinting available upon special request


 Half overlay            Cranking 08                                                                       Screw-on (VS)            Dowelled (VS8)

                         3804                                                     Item No.                 Item No.                 Item No.                 PU
                                                           Self-closing               -                    12634-34                 12638-34                 300
                         Hinge cup: steel
                         Hinge arm:
                         Zinc, nickel-plated


 Cover cap for cranking 08                                                       Item No.                                                                   PU
                         Black plastic                                           55409-41                                                                   50
                         Imprinting available upon special request




                                                                                                                                                PU = packaging unit

                                                                                     Installation in millimeters is required. (Fractional inch equivalents as noted)
10
            Full overlay                                                                    Half overlay



                                           BPH                                                                                              BPH




                          Drawing with base plate, height 1.3                                                         Drawing with base plate, height 1.3

                          Drilling distance (DD)                                                                      Drilling distance (DD)
                           3    4    5                                                                                 3    4     5
                     18              1.3                                                                          9         1.3
                     17        1.3                                                                                8   1.3
                     16 1.3                                                                                       7               4.3
                     15              4.3                                                                          6         4.3
                     14        4.3            14                                                                  5 4.3
                     13 4.3
Door overlay max.




                                                                                              Door overlay max.




                     12              9.3
                     10        9.3




                                           Base plate height (BPH)                                                                       Base plate height (BPH)


            Minimum gaps                                                                                                                     Reveal
                                                                                  Drilling distance (DD)                                                                                                           Drilling distance (DD)
The minimum gap is the gap between                                                                                                           Note                                                                   3        4   5
                                                                                   3    4    5
the closed door and the front of the                                                                                                         Reveal dimensions were determined
                                                                               16 0.5 0.5 0.6                                                                                                                 16 0.9 0.9 0.9
cabinet.                                                                                                                                     with an edge radius (of the door) of
                                                                               18 0.5 0.7 1.6                                                1mm.                                                             18 1.5 1.4 1.4
                                                                               19 0.5 1.2 2.1                                                                                                                 19 1.9 1.7 1.6
                                                                                                                                             Hinge dimensions and calculation of                              20 3.6 2.6 2.0
                                                                               20 0.9 1.7 2.6
                                                                                                                                             reveal with factory setting.
                                                                               22 1.9 2.7 3.6                                                                                                                 22 7.1 6.1 5.1
                                                                               24 2.9 3.7 4.6                                                                                                                 24 10.5 9.5 8.5
                                                                                                                                             IMPORTANT
                                                         Door thicknes (DT)




                                                                                                                                                                                         Door thicknes (DT)




                                                                                                                                             To determine the correct
                                                                                                                                             application Grass strongly
                                                                                                                                             recommends a trial mounting for
                                                                                                                                             all hinges and base plates.

                                                                                                                  Minimum gap                                                                                                        Reveal min. (R)


                    Drilling pattern for Multi Lock                           Drilling pattern for screw-on                             Drilling pattern for dowelled          Cup dimensions
                                                                                                                                                                             min. 12.8




                                                                                                                                                                                                              37
                                                                                                                                                                                                                         4




                                                                                                                                                                                                                                                       37




                                                                                                                                                                                                                                        57

                                                                                                                                                                                                                        All dimensions in millimeters.

Subject to technical modifications without notice.
                                                                                                                                                                                                                                                            11
 Snap On 3903 / 3904
 165° wide-angle hinge

                                                      •   Opening angle 165°
                                                      •   Up to 22mm door thickness
                                                      •   Z ero protrusion when door opened 90°
                                                          using full overlay hinge
                                                      •   Min. reveal 0 mm up to 22mm door thickness
                                                      •   Self-closing or Free-swinging hinges available
                                                      •   Integrated 3-dimensional adjustment in hinge arm




 Full overlay            Cranking 00                                                                         Screw-on (VZ)        Dowelled (VZ8)

                         3903                                                                               Item No.              Item No.                 PU
                                                          Self-closing                                      90110-33              09897-33                 150
                         Hinge cup:
                         Zinc, nickel-plated              Free-swinging                                             -             11154-33                 150
                         Hinge arm:
                         Zinc, nickel-plated




 Half overlay            Cranking 08                                                                         Screw-on (VZ)        Dowelled (VZ8)

                         3904                                                                               Item No.              Item No.                 PU
                                                          Self-Closing                                      18503-33              18504-33                 150
                         Hinge cup:
                         Zinc, nickel-plated
                         Hinge arm:
                         Zinc, nickel-plated




 Cover cap for cranking 00 and 08                                             Item No.                                                                    PU
                          Black plastic                                       89271-41                                                                    50
                         Imprinting available upon special request




 Opening angle reduction clip for 135°


                                                                                Opening angle reduction to 135°                         Item No.
                                                                                For 165°wide-angle hinges.                              11590-42
                                                                                Prevents doors from colliding with fronts               PU 100 pieces
                                                                                or walls in corner installations.
                                                                                Black plastic




                135∞



                                                                                                                                              PU = packaging unit

                                                                                   Installation in millimeters is required. (Fractional inch equivalents as noted)
12
            Full overlay                                                                            Half overlay                                                                    Inset

                                                        BPH                                                                                                  BPH
                                                                                                                                                                                                                                             BPH




                           Drilling distance (DD)                                                                              Drilling distance (DD)
                            3   4     5     6     7     8     9                     10                                          3     4    5     6     7      8    9     10         Use a half-overlay hinge (cranking 08), a drilling
                                                                                                                                                                                    distance of 3mm and a base plate height 12.3
                      23                                                            1.3                                   13                                 1.3
                                                                                                                                                                                    for an inset application.
                      22                                      1.3                                                         12                           1.3               4.3
                      21                                1.3                                                               11                     1.3               4.3
                      20                          1.3                               4.3                                   10               1.3               4.3
                      19                    1.3 143           4.3                                                         9          1.3               4.3
                      18              1.3               4.3                                                               8    1.3               4.3
Door overlay max.




                                                                                                      Door overlay max.




                      17        1.3               4.3                                                                     7                4.3                           9.3
                      16 1.3                4.3                                                                           6          4.3                           9.3
                      15              4.3                                           9.3                                   5 4.3                              9.3
                      14        4.3                           9.3
                      13 4.3                 Base plate height (BPH)                                                                              Base plate height (BPH)


            Minimum gaps                                                                                                                                Reveal
                                                                                          Drilling distance (DD)                                                                                                              Drilling distance (DD)
The minimum gap is the gap between                                                         3    4     5                   6    8     10                 Note                                                                   3    4    5    6    7    8   9   10
the closed door and the front of the                                                                                                                    Reveal dimensions were determined
                                                                                     16 0.5 0.5 0.5 0.5 0.5 0.5                                                                                                          16 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
cabinet.                                                                                                                                                with an edge radius (of the door) of
                                                                                     18 0.5 0.5 0.5 0.5 0.5 0.5                                         1mm.                                                             18 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
                                                                                     19 0.5 0.5 0.5 0.5 0.5 0.5                                                                                                          19 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
                                                                                     20 0.5 0.5 0.5 0.5 0.5 0.5                                         Hinge dimensions and calculation of                              20 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
                                                                                                                                                        reveal with factory setting.
                                                                                     22 0.5 0.5 0.5 0.5 0.5 0.5                                                                                                          22 0.3 0.3 1.1 2.8 2.6 2.0 1.3 0.8
                                                                                     23 0.5 0.5 0.5 0.5 0.5 0.5                                                                                                          24 8.6 7.7 6.7 5.7 4.7 3.9 3.2 2.6
                                                                                                                                                        IMPORTANT
                                                               Door thicknes (DT)




                                                                                                                                                                                                    Door thicknes (DT)




                                                                                     24 0.5 0.5 0.5 0.5 0.5 0.5
                                                                                                                                                        To determine the correct
                                                                                                                                                        application Grass strongly
                                                                                                                                                        recommends a trial mounting for
                                                                                                                                                        all hinges and base plates.

                                                                                                                          Minimum gap                                                                                                              Reveal min. (R)


                    Drilling pattern for screw-on                                                   Drilling pattern for dowelled                                                         Cup dimensions
                                                                                                                                                                                        min. 12.8




                                                                                                                                                                                                                         37
                                                                                                                                                                                                                                    4




                                                                                                                                                                                                                                                                37




                                                                                                                                                                                                                                                   57

                                                                                                                                                                                                                                   All dimensions in millimeters.

                           Subject to technical modifications without notice.
                                                                                                                                                                                                                                                                 13
Snap On 3606 / 3608
95° profiled door hinge for doors up to 35 mm thick

                                                          •   Opening angle 95°
                                                          •   Door thickness max. 25mm (with a door edge radius
                                                              of 1 mm)
                                                          •   For door thickness over 25mm (1”) door must be
                                                              beveled
                                                          •   Integrated 3-dimensional adjustment in hinge arm




 Full overlay            Cranking 00                                                                         Screw-on (VZ)            Dowelled (VZ8)

                         3606                                                                                 Item No.                Item No.               PU
                                                                                     Self-closing             18481-34                18482-34               300

                         Hinge cup: Zinc, nickel-plated
                         Hinge arm: Zinc, nickel-plated



 Cover cap for cranking 08                                                        Item No.                                                                   PU
                         Black plastic                                            55409-41                                                                   50
                         Imprinting available upon special request



 Inset                   Cranking 18.5                                                                        Screw-on (VZ)           Dowelled (VZ8)

                         3608                                                                                 Item No.                Item No.               PU
                                                                                     Self-closing             18483-34                18484-34               300

                         Hinge cup: Zinc, nickel-plated
                         Hinge arm: Zinc, nickel-plated


 Cover cap for cranking 18.5                                                      Item No.                                                                   PU
                         Black plastic                                            12353-41                                                                   50
                         Imprinting available upon special request




                                                                                                                                                 PU = packaging unit

                                                                                      Installation in millimeters is required. (Fractional inch equivalents as noted)
14
            Full overlay                                                                   Half overlay                                                                           Inset

   Drawing with                                                                            Drawing with                                                                           Drawing with
                                                                                                                                                                                                                                                             BPH
   base plate,                                    BPH                                      base plate,                                                   BPH                      base plate,
   height 1.3                                                                              height 9.3                                                                             height 1.3




                         Drilling distance (DD)                                                                                                                                                        Drilling distance (DD)
                          3    4     5                                                     Use an overlay hinge (cranking 00), a drilling distance of                                                     3                  4      5
                                                                                           3mm and a base plate height 9.3 for a half-overlay
                    15               1.3                                                                                                                                                          1
                                                                                           application.
                    14         1.3                                                                                                                                                               1.5                         1.3
                    13 1.3                                                                                                                                                                        2
                    12               4.3                                                                           Drilling distance (DD)                                                        2.5 1.3
                    11         4.3                                                                                   3    4               5                                                       3                                4.3
                    10 4.3                                                                                     7                      9.3
                                                                                           Door overlay max.




                                                                                                               6         9.3
Door overlay max.




                    9
                    8                                                                                          5 9.3
                    7                9.3                                                                       4                   12.3

                                                                                                                                                                                    Reveal (R)
                    6          9.3                                                                             3         12.3
                    5 9.3                  Base plate height (BPH)                                             2 12.3                         Base plate height (BPH)                                                                      Base plate height (BPH)


            Minimum gaps                                                                                                                              Reveal
                                                                                 Drilling Distance (DD)                                                                                                                            Drilling Distance (DD)
The minimum gap is the gap between                                                                                                                    Note
                                                                                     3   4 4.5                                                                                                                                      3     4 4.5
the closed door and the front of the                                                                                                                  Reveal dimensions were determined
cabinet.                                                                      16 1.6 2.6 3.1                                                          with an edge radius (of the door) of             16 - 25 0.0 0.0 0.0
                                                                              18 1.8 2.7 3.2                                                          1mm.                                             26 - 27 0.1 0.1 0.1
                                                                              19 1.8 2.8 3.3                                                                                                                                 28 0.7 0.2 0.2
                                                                                                                                                      Hinge dimensions and calculation of
                                                                              20 1.9 2.9 3.4                                                                                                                                 29 1.8 0.8 0.4
                                                                                                                                                      reveal with factory setting.
                                                                              22 2.1 3.1 3.6                                                                                                                                 30 2.9 1.9 1.4
                                                                              24 2.3 3.3 3.8                                                                                                                                 31 4.0 3.0 2.5
                                                                                                                                                      IMPORTANT
                                                                                                                                                                                                        Door thicknes (DT)




                                                                              26 2.4 3.4 3.9                                                          To determine the correct                                               32 5.0 4.0 3.5
                                                         Door thicknes (DT)




                                                                              28 2.6 3.6 4.1                                                          application Grass strongly                                             33 6.1 5.1 4.6
                                                                                                                                                      recommends a trial mounting for
                                                                              30 2.8 3.8 4.3                                                                                                                                 34 7.2 6.2 5.7
                                                                                                                                                      all hinges and base plates.
                                                                              32 3.0 4.0 4.5                                                                                                                                 35 8.3 7.3 6.8
                                                                              34 3.1 4.1 4.6                                                                                                                                                        Reveal min. (R)
                                                                              35 3.2 4.2 4.7                       Minimum gap


              Drilling pattern for screw-on            Drilling pattern for dowelled                                          Cup dimensions                                                                      Door profiles
                                                                                                                              min. 12.8




                                                                                                                                                 37
                                                                                                                                                                                                                                                        25
                                                                                                                                                            4




                                                                                                                                                                                                                                                             35
                                                                                                                                                                                                 37




                          42                                                    42                                                                                         57                                                                     25∞
                                                                                                                                                                                                                                        All dimensions in millimeters.

                          Subject to technical modifications without notice.
                                                                                                                                                                                                                                                                      15
Snap On 3403/45°
+45° diagonal corner cabinet hinge, half overlay

                                                          •   For 45° angle corner cabinets
                                                          •   Opening angle 95°
                                                          •   Door thickness max. 22mm
                                                          •   Integrated 3-dimensional adjustment in hinge arm




 Diagonal Corner                                                                                             Screw-on (VZ)            Dowelled (VZ8)

                         3403 / 45°                                                                           Item No.                Item No.               PU
                                                                                     Self-closing             16380-33                16382-33               150

                         Hinge cup: Zinc, nickel-plated
                         Hinge arm: Zinc, nickel-plated



 Cover cap for cranking 00                                                        Item No.                                                                   PU
                         Nickel plastic                                           12351-41                                                                   50
                         Black plastic                                            12350-41                                                                   50
                         Imprinting available upon special request




                                                                                                                                                 PU = packaging unit

                                                                                      Installation in millimeters is required. (Fractional inch equivalents as noted)
16
 45° Corner Application




                                                                                                     BPH




                                                                               Drawing with base plate, height 4.3




 Minimum gaps                                                                                          Reveal
                                                                Drilling distance (DD)                                                                                        Drilling distance (DD)
The minimum gap is the gap between                               3    4   5 5.5                        Note                                                                    3        4   5 5.5
the closed door and the front of the                                                                   Reveal dimensions were determined
                                                             16 0.0 0.0 0.0 0.0                                                                                          16 0.4 0.3 0.2 0.2
cabinet.                                                                                               with an edge radius (of the door) of
                                                             18 0.0 0.0 0.0 0.0                        1mm.                                                              18 0.6 0.5 0.3 0.3
                                                             19 0.0 0.0 0.0 0.0                                                                                          19 0.7 0.6 0.4 0.4
                                                             20 0.0 0.0 0.0 0.0                        Hinge dimensions and calculation of                               20 0.9 0.7 0.6 0.5
                                                                                                       reveal with factory setting.
                                                             22 0.0 0.0 0.0 0.0                                                                                          22 3.3 2.5 1.8 1.4
                                                             23 0.5 0.5 0.4 0.4                                                                                          24 7.3 6.6 5.9 5.5
                                                                                                       IMPORTANT
                                       Door thickness (DT)




                                                                                                                                                   Door thickness (DT)




                                                             24 1.3 1.2 1.2 1.2
                                                                                                       To determine the correct
                                                                                                       application Grass strongly
                                                                                                       recommends a trial mounting for
                                                                                                       all hinges and base plates.

                                                                               Minimum gap                                                                                                     Reveal min. (R)


 Drilling pattern for screw-on                                             Drilling pattern for dowelled                                 Cup dimensions
                                                                                                                                       min. 12.8




                                                                                                                                                                         37
                                                                                                                                                                                    4




                                                                                                                                                                                                                 37




                                                                                                                                                                                                    57

                                                                                                                                                                                   All dimensions in millimeters.

Subject to technical modifications without notice.
                                                                                                                                                                                                                  17
Snap On 3203
-45° angle corner cabinet hinge

                                                          •   For -45° angle corner cabinets
                                                          •   Opening angle 120°
                                                          •   Door thickness max. 22mm
                                                          •   Integrated 3-dimensional adjustment in hinge arm




 -45° Diagonal Corner                                                                                        Screw-on (VZ)            Dowelled (VZ8)

                         3203 / -45°                                                                          Item No.                Item No.               PU
                                                                                                              24182-34                24181-34               300

                         Hinge cup: Zinc, nickel-plated
                         Hinge arm: Zinc, nickel-plated



 Cover cap for cranking 00                                                        Item No.                                                                   PU
                         Nickel plastic                                           12351-41                                                                   50
                         Black plastic                                            12350-41                                                                   50
                         Imprinting available upon special request




                                                                                                                                                 PU = packaging unit

                                                                                      Installation in millimeters is required. (Fractional inch equivalents as noted)
18
 Overlay                                                                                              Inset




                                             BPH                                                                                                BPH




              Drawing with base plate, height 1.3                                                         For an inset application use a drilling distance of 3.5mm and a base
                                                                                                          plate height 4.3.




 Minimum gaps                                                                                      Reveal
                                                               Drilling distance (DD)                                                                                      Drilling distance (DD)
The minimum gap is the gap between                                                                 Note                                                                     3        4   5
                                                                3    4   5
the closed door and the front of the                                                               Reveal dimensions were determined
                                                            16 0.0 0.6 1.5                                                                                            16 0.7 0.7 0.6
cabinet.                                                                                           with an edge radius (of the door) of
                                                            18 0.7 1.6 2.5                         1mm.                                                               18 1.1 1.1 1.0
                                                            19 1.2 2.1 3.0                                                                                            19 2.3 1.3 1.3
                                                                                                   Hinge dimensions and calculation of                                20 4.0 3.0 2.0
                                                            20 1.7 2.6 3.5
                                                                                                   reveal with factory setting.
                                                            22 2.7 3.6 4.5                                                                                            22 7.5 6.5 5.5

                                                                                                   IMPORTANT
                                       Door thicknes (DT)




                                                                                                                                                 Door thicknes (DT)




                                                                                                   To determine the correct
                                                                                                   application Grass strongly
                                                                                                   recommends a trial mounting for
                                                                                                   all hinges and base plates.

                                                                              Minimum gap                                                                                                    Reveal min. (R)


 Drilling pattern for screw-on                                            Drilling pattern for dowelled                               Cup dimensions
                                                                                                                                    min. 12.8




                                                                                                                                                                      37
                                                                                                                                                                                 4




                                                                                                                                                                                                               37




                                                                                                                                                                                                57

                                                                                                                                                                                All dimensions in millimeters.

Subject to technical modifications without notice.
                                                                                                                                                                                                                19
Snap On 3303
95° blind corner hinge,

                                                           •   For flush mounting on blind corner applications
                                                           •   Opening angle 95°
                                                           •   Door thickness max. 22mm
                                                           •   Integrated 3-dimensional adjustment in
                                                               hinge arm




 Inset                                                                                                          Screw-on (VZ)            Dowelled (VZ8)

                          3303                                                                                   Item No.                Item No.               PU
                                                                                        Self-closing             11511-33                11606-33               150

                          Hinge cup: Zinc, nickel-plated
                          Hinge arm: Zinc, nickel-plated



 Cover cap for cranking 00                                                          Item No.                                                                    PU
                          Nickel plastic                                            12351-41                                                                    50
                          Black plastic                                             12350-41                                                                    50
                          Imprinting available upon special request




 Base plate for blind corner hinge                                                                                Screw on

                                                                                  3.5
                          •   Zinc, nickel-plated                                         32
                          •   For wood screws
                                                                                                                    Description               Item No.           PU
                          •   14mm setback distance
                                                                                                                    3303/4.3/5.2/14           11704-41           50
                          •   Line boring 32mm
                                                                                                14




 Base plate for blind corner hinge                                                                                For Euro screws

                          •   Zinc, nickel-plated                                   6
                                                                                           32
                          •   For Euro screws                                                                       Description               Item No.           PU
                          •   14mm setback distance                                                                 3303/4.3/6.8/14           55677-41           50
                          •   Line boring 32mm
                                                                                                14




                                                                                                                                                    PU = packaging unit

                                                                                         Installation in millimeters is required. (Fractional inch equivalents as noted)
20
 Inset



                                                                                            Baseplate




                                                  BPH




                                                                                 Reveal
                                                                                                                                                       Drilling distance (DD)
                                                                                 Note                                                                   3        4   5 5.5
                                                                                 Reveal dimensions were determined
                                                                                                                                                  16 0.5 0.5 0.5 0.5
                                                                                 with an edge radius (of the door) of
                                                                                 1mm.                                                             18 0.5 0.5 0.5 0.5
                                                                                                                                                  19 0.5 0.5 0.5 0.5
                                                                                 Hinge dimensions and calculation of                              20 0.9 0.8 0.8 0.7
                                                                                 reveal with factory setting.
                                                                                                                                                  22 2.3 2.0 1.7 1.6

                                                                                 IMPORTANT




                                                                                                                             Door thicknes (DT)
                                                                                 To determine the correct
                                                                                 application Grass strongly
                                                                                 recommends a trial mounting for
                                                                                 all hinges and base plates.

                                                                                                                                                                        Reveal min. (R)


 Adjustments
                                              GRASS




                                                                              Height adjustment           Side adjustment                                   Depth adjustment
                                                                                      ±2 mm                   ±2 mm                                             ±2 mm

                                                                                  All adjustment options are independent of one another.


 Drilling pattern for screw-on                          Drilling pattern for dowelled                              Cup dimensions
                                                                                                                 min. 12.8




                                                                                                                                                  37
                                                                                                                                                             4




                                                                                                                                                                                          37




                                                                                                                                                                             57

                                                                                                                                                            All dimensions in millimeters.

Subject to technical modifications without notice.
                                                                                                                                                                                           21
Snap On 3503 / 3505
100° glass door hinge

                                                          •   Glass door hinge, 30mm cup
                                                          •   For tempered glass thicknesses of 4 to 7 mm
                                                          •   Opening angle 100°
                                                          •   Integrated 3-dimensional adjustment in hinge arm
                                                          •   Decorative cover plates available
                                                          •   Not suitable for stained glass




 Full overlay            Cranking 00

                         3503                                                                                       Item No.                                  PU
                                                                                     Self-closing                   50110-34                                  300

                         Hinge cup: Black, plastic
                         Hinge arm: Zinc, nickel-plated



 Cover cap for cranking 00                                                        Item No.                                                                    PU
                         Nickel plastic                                           12351-41                                                                    50
                         Black plastic                                            12350-41                                                                    50
                         Imprinting available upon special request


 Inset                   Cranking 18.5

                         3505                                                                                       Item No.                                  PU
                                                                                     Self-closing                   50111-34                                  300

                         Hinge cup: Black, plastic
                         Hinge arm: Zinc, nickel-plated



 Cover cap for cranking 18.5                                                      Item No.                                                                    PU
                         Black plastic                                            12353-41                                                                    50
                         Imprinting available upon special request



                                                                                     Decorative cover plates




                                                                                     Color                                             Item No.               PU
                                                                                     black                                             84221-41               50
                                                                                     nickel                                            83585-41               50
                                                                                     gold                                              83584-41               50


                                                                                     Material ABS, bright finish.




                                                                                                                                                  PU = packaging unit

                                                                                      Installation in millimeters is required. (Fractional inch equivalents as noted)
22
            Full overlay                                                  Half overlay                                                               Inset



                                           BPH                                                                          BPH                                                                       BPH




                    Drawing with base plate, height 1.3                  Drawing with base plate, height 9.3                                                   Drawing with base plate, height 1.3

                         Drilling distance (DD)                                                    Drilling distance (DD)                                                Drilling distance (DD)
                          6                                                                          6                                                                    6
                     17 1.3                                                                     9 9.3                                                                2   1.3
                     14 4.3                                                                     6 12.3                                                               5 4.3
                      9 9.3
                      6 12.3
Door overlay max.




                                                                          Door overlay max.




                                                                                                                                                        Reveal (R)

                                         Base plate height (BPH)                                                    Base plate height (BPH)                                             Base plate height (BPH)


                     Note: For tempered glass, drilling distance must                         IMPORTANT
                     be 1 1/2 times the glass thickness.                                      To determine the correct application Grass
                     Therefore, maximum thickness for tempered                                strongly recommends a trial mounting for all
                     doors is 4mm (5/32”)                                                     hinges and base plates.


                                                                                              Not suitable for stained glass



                                                                                              Hinge dimensions and calculation of reveal with factory setting.




            Dimensions




                                                           Attaching the hinge cup:
                                                           use screws Ø 2.9 x 11mm
                                                           (screws included)




                                                                                                                                                                                    All dimensions in millimeters.

Subject to technical modifications without notice.
                                                                                                                                                                                                                  23
Snap On 3000 Base plates




                                                                                  Height adjustment            Side adjustment               Depth adjustment
            GRASS




                                                                                       ±2 mm                       ±2 mm                         ±2 mm

                                                                                      All adjustments are independent of one another.




 Wing Base plate                                                                                 For wood screws
                                                            3.5
                       •   G3/RZ x/5.2/37                              32                        Height (x)   Item No.       PU         Item No. Bulk    PU
                       •   Zinc die cast
                                                                                                 1.3          10759-41       50         10759-54         1000
                       •   For use with wood screws
                                                                                                 4.3          10763-41       50         10763-53         500
                       •   37mm setback distance
                                                                             32                  9.3          10767-41       50         10767-53         500
                       •   Line boring 32mm
                                                                                                 12.3         30532-41       50         30532-52         300
                                                                      17

                                                                            37




                       •   Attach with # 6x5/8” FHP
                                                                                                 20.0         30534-41       50         30534-52         300




 Wing Base plate                                                                                 For Euro screws
                                                                  6
                       •   G3/RZ x/6.8/37                              32
                                                                                                 Height (x)   Item No.       PU         Item No.         PU
                       •   Zinc die cast                                                         1.3          10761-41       50         10761-54         1000
                       •   For use with Euro screws                                              4.3          10765-41       50         10765-53         500
                       •   37mm setback distance                                 32              9.3          10769-41       50         10769-53         500
                                                                      17




                       •   Line boring 32mm
                                                                            37




                                                                                                 12.3         30533-41       50         30533-52         300
                       •   Attach with 13mm Euro screws                                          20.0         30535-41       50         30535-52         300




 Wing Base plate                                                                                  With pre-mounted Euro screws

                                                                       32
                       •   G3/RZ x/ES/37                                                          Height (x) Item No.        PU         Item No.         PU
                       •   Zinc die cast
                                                                                                  1.3         12643-41       50         12643-53         500
                       •   For use with pre-mounted
                                                                                                  4.3         10191-41       50         10191-53         500
                           Euro screws                                           32
                                                                                                  9.3         17672-41       50         17672-53         500
                                                                      17




                       •   37mm setback distance
                                                                            37




                       •   Line boring 32mm


 Straight Base plate                                                                              For wood screws

                                                          5.2
                       •   G3/AZ x/5.2                                                            Height (x) Item No.        PU         Item No.        PU
                       •   Zinc die cast                                                          1.3         10717-41       50         10717-54        1000
                       •   For use with wood screws                                               4.3         60174-41       50         60174-54        1000
                                                                             32
                       •   Attach with # 6x5/8” FHP                                               9.3         12355-41       50         12355-53        500
                                                                      17




                                                                                 Installation in millimeters is required. (Fractional inch equivalents as noted)
24
Snap On 3000 Base plates




                                                                                       Height adjustment        Side adjustment             Depth adjustment
                  GRASS




                                                                                            ±2 mm                   ±2 mm                       ±2 mm

                                                                                       All adjustment options are independent of one another.




     Straight Base plate                                                                          With pre-mounted dowels

                               •   G3/DZK x/17                                                    Height (x)              Item No.                   PU
                               •   Zinc, nickel-plated
                                                                                                  1.3                     10721-21                   1000
                               •   With pre-mounted dowels
                                                                                                  4.3                     60176-41                   50
                                   for automatic insertion
                                                                                                  9.3                     11519-41                   50

                                                                                 10
                                                                             ø
                                                                                      32
                                                                       12




                                                                            17




     Face Frame Adapter                                                                           For wood screws

                               •   Face Frame Adapter FFA 4.3 mm                                  Height (x)   Item No.          PU    Item No.       PU
                               •   Zinc, nickel-plated
                                                                                                  4.3          69238-41          50    69238-52       300
                               •   Attach with 2 x #6 x 5/8” FHP
                                                                                                  7.3          13160-41          50    13160-52       300




     Face Frame Adapter with lip                                                                  For wood screws

                               •   G3/FFAL 2.6 mm                                                 Height (x)   Item No.          PU    Item No.       PU
                               •   Zinc, nickel-plated
                                                                                                  1.3          13158-41          50    13158-52       300
                               •   Attach with 4 x #6 x 5/8” FHP




     Face Frame Adapter for inset                                                                 For wood screws

                               •   G3/FFA/Inset 1.3 mm
                                                                                                  Height (x)   Item No.          PU    Item No.       PU
                               •   Zinc, nickel-plated
                                                                                                  1.3          39183-40          25    39183-48       125
                               •   Attach with 2 x #6 x 3/4” FHP
                                                                                                  9.3          39184-40          25    39184-48       125
                                   screws. A third hole is available
                                   that will accept a
                                   #6 x 3/4” RHP screw.




    Subject to technical modifications without notice.
                                                                                                                                                           25
Accessories
For Snap On 3000 hinges

 Spacer for wing base plates, 3mm


                                                                                      Item No.                    Item No.
                                                                                      10129-41                    10129-54
                                                        0                             PU 50                       PU 1000
                                                   3.




 7.5° Spacer wedge


                                                                                                                  Item No.
                                                                                                                  38314-41
                                                                                                                  PU 50




Overlay Application Solution 97.5°   Overlay Application Solution 105°

 With 1 Spacer Wedge                  With 2 Spacer Wedges




Inset Application Solution 97.5°     Inset Application Solution 105°

 With 1 Spacer Wedge                  With 2 Spacer Wedges




                                                             Installation in millimeters is required. (Fractional inch equivalents as noted)
26
  Opening angle reduction clip for 95°


                                                               Opening angle reduction to 95°                     Item No.
                                                               For 110°standard door hinges.                      80149-41
                                                               Prevents doors from colliding with fronts          PU 50
                                                               or walls in corner installations.
                                                               Black plastic




           95∞



  Opening angle reduction clip for 135°


                                                               Opening angle reduction to 135°                    Item No.
                                                               For 165°wide-angle hinges.                         11590-42
                                                               Prevents doors from colliding with fronts          PU 100
                                                               or walls in corner installations.
                                                               Black plastic




                     135∞


 Screws


 Euro screw, nickel-plated

                                                                Description                            Item No.                  PU
                                  Ø 6.3




                                                                13mm Euro Screw (1/2”)                 81015-43                  500
                                                                18mm Euro Screw (11/16”)               83000-43                  500
                                              Length   Ø 7.1
                                                                7.5mm Euro Screw (5/16”)               83001-43                  500
                                                                13mm Pan head Euro Screw               13398-43                  500



 Wood screw, nickel-plated

                                                                Description                        Item No.                   PU
                                   Ø 3.5




                                                                #6 x 1/2” FHP, NI                  81014-43                   500
                                                                #6 x 7/16” FHP, NI                 81016-43                   500
                                                15      Ø7
                                                                #6 x 5/8” FHP, NI                  81001-43                   500
                                                                #6 x 3/4” FHP, NI                  81003-43                   500
                                                                #6 x 1” FHP, NI                    81004-43                   500



   Pozidrive screwdriver

Pozidrive screwdriver for hinges and slides                            Description                                Item#      PU
                                                                       Pozidrive screwdriver                      98000-01   1




 Subject to technical modifications without notice.
                                                                                                                                       27
Accessories
For Snap On 3000 hinges
 Door Stops




                                        Description                                                               Item No.              PU
                                        H-950 clear, door stop                                                    00068-43              500
                                        Face frame door stop w/screw                                              83000-43              500




 Door Bumpers



                            D          Description                                                            Item No.                 PU
                                       Self-adhesive bumper, clear 12.5 mm x 2.5 mm [1/2” x 3/32”]            630.000.02.1250          5000

                             H         Self-adhesive bumper, clear 10 mm x 3 mm [3/8” x 1/8”]                 630.000.03.1050          1000
                                       Self-adhesive bumper, clear 7 mm x 1.5 mm [1/2” x 1/16”]               630.000.03.0750          1000




                           12 mm           9.5 mm
                                       Description                                                            Item No.                 PU
                           (15/32”)           3
                                       AirSoft (Bumper Pad, clear 12 mm x 5 mm [15/32” x 3/16”]
                                                 /8”)                                                         63481-43                 500
                            5 mm             2.5 mm
                                       AirSoft Bumper Pad, clear 12 mm x 5 mm [15/32” x 3/16”]                63483-30                 5000
                            (3/16”)            (1/8”)


                           11 mm            11 mm
              12 mm          (7 mm
                          9.5 /16”)          (7/16”)
                                       Description                                                            Item No.                 PU
              (15/32”)     (3
                         12 3/8”)
                              mm           9.5 Bumper Pad, clear 9.5 mm x 2.5 mm [3/8” x 1/8”]
                                       AirSoft mm                                                             63480-99                 480
                                mm            1.6 mm
              5 mm       (15/(32”)”)
                          2.51mm/8          (3 (8”) ”)
                                       AirSoft/Bumper Pad, clear 9.5 mm x 2.5 mm [3/8” x 1/8”]
                                                1/16                                                          63482-30                 5000
              (3/16”)     5
                              1/8”)
                            (mm           2.5 mm
                         (3/16”)           (1/8”)
              11 mm       11 mm
              (7/16”)      (7/16”)
                         11 mm         Description
                                          11 mm                                                               Item No.                 PU
                          7/16”)
                         (1.6 mm          (7/ Pad,
                                       Bumper16”) clear 11 mm x 3 mm [7/16” x 1/8”]                           31002-43                 500
               3 mm
               (1/8”)       1/16
                          3(mm”)          1.6 Pad,
                                       Bumper mm clear 11 mm x 1.6 mm [7/16” x 1/16”]                         31004-43                 500
                          (1/8”)           (1/16”)



 Dowels



                                       Description                                                            Item No.                 PU
                                       10 mm dowel for baseplate                                              84902-43                 500
                                       8 mm dowel for VZ hinge cup                                            04885-43                 500
                                       8 mm dowel for VS hinge cup                                            00102-43                 500
                                       5 mm dowel without screws                                              522.000.18.1350          500




                                                                 Installation in millimeters is required. (Fractional inch equivalents as noted)
28
Shelf Supports




                                                                                                  Description                                              Item No.          PU
                             4.5                                                                  Plastic, clear, steel pin                                499.582.50.0050   5000
                                                                       5
                                                          8



                                 9       10
                       5
                                              4.5
                                                                                   5
                                                      7
                                                                           8



                                              9        10                                         Description                                              Item No.          PU
                                     5
                 4.5                                                                              Metal spoon, nickel plated                               499.582.50.2050   2000
                                               5
                                                                       7
                                     8




                                                                                                                          4.5
                           4.5                                                                                                                         5
                                                                   5
                                                                                                                                                   8
                                                  8


                                                                                                  Description                                              Item No.          PU
                                                                                                                              9       10
                                                                                                  Diecast, nickel plated
                                                                                                             5                                             517.206.64.1015   500
                                                                                                                                               7




                                                                                                 4.5          4.5         5                5
                                                                                                                      8           8


                                                                                                  Description                                              Item No.          PU
                                                                                                 9       10
                                               4.5
                                                                                       5          Nickel plated                                            517.206.61.0015   500
                                                                                             5
                                                                               8
                                                                                                                  7


                                                   9          10
                                         5

                                                                           7
                                                                                       4.5
                                                                                                              5
                                                                                                     8


                                                                                                  Description                                              Item No.          PU
                            4.5                                                                   H-802 plastic, clear, square                             00036-43          500
                                                                       5
                                                       8




Subject to technical modifications without notice.
                                                                                                                                                                                    29
Ecopress
Drilling and insertion machine for 42 mm boring pattern


                                                        •   Bore depth automatically adjusts to material thickness
                                                        •   Functional design
                                                        •   Accurate fence is easily adjusted
                                                        •   Chip removal by air on pneumatic machines
                                                        •   Easy, fast and efficient operation
                                                        •   Easy maintenance
                                                        •   42 mm boring pattern




  Motor configuration           Item No.
  110v single phase manual      91934-01
  110v single phase pneumatic   91933-01
  220v single phase manual      91935-01
  220v single phase pneumatic   91931-01
  220v three phase pneumatic    91932-01
                                PU 1 piece




Scale bar                                    Pneumatic control                          Hold-down block
Graduated scale for exact                    Pneumatic feed and pneumatic               Optimum fixing on the Ecopress
measurement on the machine.                  hold-down device.                          Pneumatic with the pneumatic
                                                                                        hold-down device.




30        www.grassusa.com                          Dimensions in millimeters, fractional inch equivalents as noted.
  Carbide drill bits for Ecopress


                                                               Diameter             Direction            Item no.
                                                               35 mm                RH                   00077-01
                                                                8 mm                LH                   00160-01
                                                                                                         PU 1




                                                               Bit set for hinge drilling                Item no.
                                                               1 x 35 mm/RH, 2 x 8 mm/LH                 00213-01
                                                                                                         PU1 set



  Extension bars and line boring guide for use with Ecopress




                                                               Type                  From/ Up to         Item no.
                                                               Type 1                360 mm - 1360 mm    37535-01
                                                               Type 2                1360 mm - 2350 mm   37536-01
                                                               Line boring guide                         13967-01
                                                                                                         PU 1




  Additional stops for Ecopress

                                                               Type                                      Item no.
                                                               Left                                      89610-01
                                                               Right                                     89510-01
                                                               Raised panel stop                         00292-01
                                                                                                         PU 1

  Insertion dies for Ecopress


                                                               Insertion die for 110/125 hinges          Item no.
                                                               3703/3803 Insertion die                   90282-01
                                                                                                         PU 1




                                                               Insertion die for 165 hinges              Item no.
                                                               3903 Insertion die                        37552-01
                                                                                                         PU 1




                                                                                                         PU = packaging unit


Subject to technical modifications without notice.                                                                       31
Grass America Inc.           Grass Canada Inc.
1202 Highway 66 South        475 Finchdene Square, Unit 9
                                                             01874-01S3B-12/10-MAP-4M




Kernersville, NC 27284       Toronto, ON M1X 1B7

Phone 1-800-334-3512         Phone 1-800-461-4975
Fax 1-800-525-8406           Fax 1-416-335-5907

Internet: www.grassusa.com   Internet: www.grasscanada.com
E-Mail: info@grassusa.com    E-Mail: info@grasscanada.com

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:252
posted:4/24/2011
language:English
pages:32