FRP and Plastic Fans_ Blowers_ Ventilators

Document Sample
FRP and Plastic Fans_ Blowers_ Ventilators Powered By Docstoc
					?Industrial Pressure Blower Co. is an engineering firm for fiberglass and plastic
blowers and fans for industrial applications where aggressive media must be moved.
Plastic fans include polypropelene, PVC, PVDF, fire retardant and UV resistant PPs.

Applications for Corrosion and Chemical Resistant Fans include:

* University, Medical Research, Defence Labs, Fume Hoods OEMs, Pharmaceutical
Labs

 On most campuses there is a certain number of fume hoods that are used for various
acids testing to break down materials for analysis. HCl and Perchloric Acid are the
ones used most commonly. Fume hoods and Chemical resistant fans are needed.

* High Technology Semiconductors, PCBs, and Photonics

 Chip makers use acids to clean metal before they mount thin film on the metal upon
which they lay circuitry.

* Printed Circuit Board Industry

 FRP fans are frequenly used for clean rooms.

* Waste water and Sewage Treatment Plants

 Hydrogen Sulfide builds up (H2S) in sewage plant facilities and causes an odor
problem that has to be treated. Depending on the size of these stations corrosion
resistant fans are needed. This gas can also be very volatile and will require explosion
proof motor and static grounding of the fan housing by graphite impregnation that
Industrial Pressure Blower Co. can provide too.

* Salt Air and High Humidity Environments

 Any facility near the salt air is also a good place for plastic fans and the humidity
will eat through metal fans.

* Steel and Wire Manufacturing

 As the steel comes in and sits at these plants impurities and scale develop on the
steel or the wire that needs to be cleaned off before the wire or steel can be properly
worked with. Acid baths are needed for this and the corrosive fumes coming off these
aced baths are highly corrosive...

* Stainless Steel and other Metal Production Facilities
 In tha Annealing and Pickling process acid baths are used to strip scale off the steel
after the annealing process that smoothed out grain patterns that may have formed
during the annealing process. Later on acids are used again to support oxidation.

* Chemical and Petrochemical Industries

* Jet Engine and Power Plant Turbine Manufacturing or Servicing

 Molted Salt tanks are often used here to descale metals coming out of hot furnaces.
Pickling and cleaning of titanium which is used in Jet engine parts also utilize acid
baths as does nickel plating.

* Electroplating and Metal Finishing

 These industries use fiberglass fans and fume scrubbers.

* Scrubber OEMs and Designers

 FRP fans are standard components in fiberglass srubber designs.

* Industrial Galvanizers

* Printing Press Service Shops

* Chromatography

* Food Processing

 Often in the food processing industry they wash equipment down with acids and
other corrosives. Also they use fans for the humidity that builds up from the drying
process of foods.

* Pulp and Paper Industry

 Pulp and paper manufacturers are very wide users of fiberglass and other plastics
fans for their boilers, exhaust and filtration systems.

Industrial Pressure Blower Co. fans are the finest quality blowers available for
efficient movement of corrosive, humid, or polluted air, gases, and fumes. These
fire-retardant and corrosion-resistant plastic fans are specially designed and especially
suited for hostile applications where coated metal blowers typically corrode.
Industrial Pressure Blower Co. fans are proven thoughout the world and clearly
recognized for superior quality, reliability, and efficiency.
High-efficiency impellers result in low power consumption, operating costs, and
quieter operation. All metal hardware is completely sealed from exposure to corrosion
by incapsulating into FRP or plastic; the steel support frame and motor base are
powder coated with a corrosion-resistant finish. In addition to being highly resistant to
chemical corrosion, PP fans are self-extinguishing and will not support combustion.

Industrial Pressure Blower Co. FRP fans housings are manufactured from premium
grade, fire resistant resins that provide excellent corrosion resistance in most chemical
environments. Industrial Pressure Blower Co. FRP impellers are made of premium
vinyester that combines corrosion resistance with structural integrity under the stress
of rotation.

Tough applications mean tough fans and blowers by Industrial Pressure Blower Co.
IPB is a world wide distributor of industrial process ans OEM fans and blowers, as
well as fan / blower components; including high pressure blowers, high temperature
fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high
pressure ventilators. Industrial Pressure Blower Co. also does existing fans and
blowers repairs, re-build, as well as dynamical wheels balancing.

For additional information please refer to

Susan Terlitski
Industrial Process Designer
Industrial Pressure Blower Co.
/blower.html
/fan.html

				
DOCUMENT INFO