Docstoc

iDP_VESA_PR

Document Sample
iDP_VESA_PR Powered By Docstoc
					VESA® Issues Internal DisplayPort® Standard for Flat Panel TVs
      –Simplifies Interconnection Implementation & Improves Screen Performance

Milpitas, CA., May 10, 2010 – The Video Electronics Standards Association (VESA)
today issued the new Internal DisplayPort (iDP™) interface standard for inside-the-box
connectivity within flat panel TVs. The standard is designed to replace LVDS (Low
Voltage Differential Signaling) with a simpler and higher-performing connectivity
technology based on the widely adopted VESA DisplayPort standard.

The VESA iDP standard addresses the connection between a TV controller SOC
(System-on-a-Chip) and a TV panel Timing Controller (TCON) within a TV chassis.
Only 17 signals – eight differential pairs and one Hot Plug Detect (HPD) signal – are
needed to transport Full HD 240Hz at 10 bits per color over the iDP link, reducing cost
and manufacturing complexity compared to the LVDS 96-signal requirement. The open
and royalty-free standard will create a healthy competitive environment with component
suppliers, further enhancing cost benefits while driving innovation within the consumer
electronics industry.

This is a scalable standard, allowing for support of future design needs. For example,
with iDP a 4K x 2K at 240Hz display only requires two banks of 16 differential pairs and
one HPD for 65 signals. In comparison, LVDS would require 192 differential pairs (or
384 signals) to support this rate. Other iDP advantages include elimination of the many
LVDS printed circuit board traces and device pins which result in reduced system form
factor and cost, and less shielding requirement due to reduced EMI.

Similar to the existing VESA eDP™ (Embedded DisplayPort) interface standard used
within Notebooks and other PC devices with internal displays, iDP is designed around the
special needs of flat panel television displays and provides specific optimizations for
internal flat panel TV applications.
“Today’s flat panel TV manufacturers are in a constant race to provide better picture
quality, more realistic animation, and even 3D video. This continues to push refresh rates
higher and has created the need for a new high-speed panel interface standard,” said
VESA Executive Director Bill Lempesis. “VESA’s iDP standard meets that need while
also helping control costs.”

Industry Quotes
“The ratification of the iDP standard by VESA is a key milestone in acceleration of iDP
as an industry-wide standard,” said Luigi Mantellassi, General Manager of TV and
Monitor Division at STMicroelectronics. “ST is fully committed to support deployment
of VESA’s iDP standard and plans to expand its implementation across all of our Monitor
and TV SOC platforms.”


"LG Display is pleased to adopt the VESA iDP as an optimized interface for the next
generation TV panels requiring high video bandwidth and low EMI in 2011,” said In Jae
Chung, Executive Vice President and CTO at LG Display. “The VESA iDP standard
provides both our customers and display industries with the huge benefits of an open
standard.”

“We believe the new VESA iDP standard defines a mechanism for mitigating the impact
to the panel interface resulting from increasing resolutions and higher refresh rates,” said
Stuart Thomson, Senior Director of Product Marketing, Digital TV at Broadcom
Corporation. “Among other benefits, it reduces the complexity of the cabling and
supports smaller connectors than are common today. Our commitment to develop and
deliver advanced technology in all areas of digital TV, including supporting VESA’s iDP
standard, will foster the placement of digital TVs as the hub of entertainment,
information and communication in the digital home.”

“It is our pleasure to adopt the VESA iDP as a standard for a high-bandwidth interface
particularly with the emergence of 3D TV and the huge demand for high-resolution TV,”
said YoonSeok Song, Vice President of TLI. “As a TCON maker, we expect the TCON
will have more opportunities to enhance the variety of panel features through the
isolation of the SOC and TCON in the TVs.”

“Agilent recognizes the importance of DisplayPort to the consumer electronics industry,
especially as it evolves to address key functionality and cost points that will serve the
markets now and into the future,” said Jay Alexander, Vice President and General
Manager of Agilent's Oscilloscopes Business. “The rapid development and
implementation of VESA’s iDP standard is a testament to the contributions made by this
family of standards in display and video applications.”

"Astrodesign supports the VESA iDP standard and intends to provide test
equipment/pattern generator for the standard,” said Yasuo Kobayashi, General Manager
R&D Department at Astrodesign.

The new VESA iDP standard extends the advantages of DisplayPort, which enables high-
bandwidth audio and video signal transmission, and is also delivering major display
advantages for laptops, monitors and projectors.

About VESA
VESA is an international non-profit corporation representing a voting membership of
more than 150 corporate members worldwide. VESA supports and sets industry-wide
interface standards for the PC, workstation, and consumer electronics industries. VESA
provides a forum to develop, promote and support open standards for the display
industry. For more information: www.vesa.org
MEDIA CONTACT:
Brian Eble
Cell: 630-742-9295
Office: 630-799-8144
beble@brandanimal.net

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:5
posted:4/21/2011
language:English
pages:3