Ares Security Vehicles is a specialised manufacturer of high quality armoured vehicles. Our cars are
the perfect choice for a variety of customers including military and peacekeeping forces, police forces,
border patrols, security companies, NGO’s, embassies, and all organisations and individuals living and
working in hostile or high-risk environments.
Ares Security Vehicles is a young and dynamic company producing a wide range of armoured
vehicles to the highest levels available for the protection of non-tactical vehicles.
ASV brings together a team of experienced personnel in all aspects of armoured vehicle design and
manufacture, providing customer-focused service with rapid reaction and short lead-times to avoid the
compromises that customers have to make when purchasing from existing stock
ASV is now in its second phase of expansion, with 11000 sq-ft of workshop area and a workforce of 46
combining to give a production capacity of 30 vehicles per month which can be increased to 45 units per
month when required.
ASV-armoured vehicles are built using only proper, fully certified armouring materials from reputable
suppliers that have been on the market for many years, and no expense is spared to ensure that our
technicians have quality tools and are able to fully concentrate on the tasks at hand. A carefully selected
supply chain and tightly controlled overheads and the expertise and efficiency of its workforce allow
ASV to offer cost effective reliable solutions.
Besides the wide range of models on offer, Ares’s highly skilled technicians and engineers will develop
new designs and tailor-made solutions to satisfy the most stringent requirements.
Ares’s armouring is professionally integrated
into the shell and the doors of the vehicles. The result is a complete armoured Armouring Level:
structure that contributes to reinforcing the original body of the vehicle. The pillars CEN B6, NIJ III, NIJ IV, CEN B7,...
carrying the doors are specially reinforced at the hinge mounting points, which are
directly attached to the armouring structure, and the doors are reinforced in a similar
way with the hinge mounting-points also directly attached to the armouring of the Certified Armouring Materials
door. In this way, the whole added weight of the armouring of the door is supported by
the armoured structure of the shell thereby guaranteeing the integrity of the
assembly and preventing undue stress on the original body structure. Suspension
Run-Flat Devices on 5 Wheels as
and brake upgrades are included in the standard specifications, as well as the standard
protection of the battery and the fuel-tank.
Most of Ares’s production is armoured to level “B6” but ASV offers a range of
protection levels from “B4” to “B7” based on the European CEN standards, and will
also provide protection according to other ballistic standards such as NATO
STANAG, US NIJ, Russian GHOST or any specific standard required by the
In B6 level armour we use materials, both opaque and transparent, that meet or
exceed the requirements of the European CEN 1522/23 and CEN 1063 standards to
the level FB6 for opaque areas and BR6 for transparent areas.
All four sides of the passenger compartment and the roof of the vehicle are protected
using high-quality armour steel and glass defeating 7.62x51mm M80 Nato Ball
ammunition (U.S. NIJ level III, CEN level B6) and 5.56x45 SS109 ammunition (CEN
level B5 and B6) at 0° incidence (90° to the surface) and 10m range according to
CEN1063 and CEN1522.
The armouring is integrated inside the vehicle’s cab and forms a complete self-
supporting structure so as to avoid excessive stress on the vehicle’s original structure.
The interior armour-frame provides overlap for the large-surface armour components
such as the door armour-plates and the windows.
Hinge mounting points are reinforced both in the pillars and in the doors in a way that
the armouring of the door is supported by the armouring of the pillar.
Heavy-duty hinges with in-built door-stop.
Fuel-tank(s) protected with steel armour-plates.
The battery and control module of the engine are protected to the same level as the
Only materials that were successfully tested against projectiles and explosives by
independent laboratories used in the production of the armouring. Test reports will be
presented upon request or during a factory visit.
Additional equipment included as standard:
Further optional equipment is available beyond ASV’s standard specifications, such as
Operable front-door windows
Communications equipment (VHF, UHF, satellite...)
Electronic Counter Measure Equipment (RF Jammer)
Video recording/surveillance equipment
Higher ballistic protection level
Additional blast protection www.aressecurityvehicles.com
Other (please contact ASV with your specific requirements)
Over 50 armoured vehicles are leaving the production line every month, built through a
process driven and quality focused system to ensure conformity of production as you would
expect of any volume vehicle manufacturer.
Every stage of the production process in ASV is tracked and recorded to guarantee that strict
security standards are adhered to, quality control is integral at every process stage along the
production line. All welders and armour welding is certified according to internationally
A thorough vehicle check is undertaken in our pre-delivery inspection department that is
equipped with brake, suspension and engine testing equipment. Finally the factory includes
an off-road terrain area for a practical shakedown of each completed vehicle prior to delivery.
RANGE OF ARMORED VEHICLES
ARMORED TOYOTA LAND CRUISER (B6 & B7 LEVEL ARMORED)
We will armour SUVs to any desired level of Protection.
· The armouring is integrated inside the vehicle's cab and forms a complete self-supporting
structure so as to avoid excessive stress on the vehicle's original structure.
· The interior armour-frame provides overlap for the large-surface armour components such
as the door armour-plates and the windows.
· Hinge mounting points are reinforced both in the pillars and in the doors in a way that the
armouring of the door is supported by the armouring of the pillar.
· Heavy-duty hinges with in-built door-stop.
· Fuel-tank(s) protected with steel armour-plates.
· The battery and control module of the engine are protected to the same level as the
ARMORED CHEVROLET SUBURBAN
ARES armored Chevy Suburban B6/B7 ballistic protection level, also features blast protection and
improved vehicle handling.
The armored Chevrolet Suburban from Ares Security Vehicles is a SUV that provides exceptional
protection while offering versatile utility.
The Suburban is an exceptionally robust chassis that is able to support armoring up to the CEN B7/NIJ
IV level, meaning that the vehicle will be able to defeat multiple 7.62x51mm armor piercing rounds
typically fired from highpowered rifles. In addition, the passenger cabin is equipped with blastprotection
to keep occupants safe from up to 2 hand grenades.
ARMORED HUMMER H2
Armor Conversion Modifications / Alterations
Five side armoring of passenger compartment (roof and verticals) to provide protection against
7.62x51mm M80 NATO Ball ammunition, in accordance with CEN Level BR6, at zero degree
Floor of the vehicle is fitted with a blast protection to protect occupants against fragmentation from
simultaneous detonation of 2 DM-51 German ordnance hand grenades or equivalent.
If you would like to learn more about our company, or if you have questions about the services that we have to
offer, select the most convenient method below to contact us. We look forward to assisting you with all your
Armory & Security Needs.
Physical Address Information Desk Sales Enquiry
Dubai Investment Park email@example.com
P.O.Box 112625 firstname.lastname@example.org Contact: Joby George
United Arab Emirates Tel: +971 48858128
Mob: +971 505743419