HEAVY DUTY SLIDE BARS for Stereo Recording from Jasper Ingineering.
This series of Slide Bars were designed for use with most cameras and especially for larger SLR's
and Medium Format cameras.
The Heavy Duty Twin Camera Slide Bars (HDSLB's) can be used with one or two Roller Blocks, for
single still life or twin camera live action stereo photography. The Bar has Engraved Lines for the
Block center alignment and lines 1¼" (31.75 mm) each side of the Block position, to be used as
reference points to set the Adjustable Sliding Stops at your desired spacing. The Blocks and
moveable Sliding Stops are removable for camera mounting. They are also equipped with soft
tipped Thumb Screw Locks for steady action. A Bubble Level is inset into the Bar and the Bar is
equipped with spring loaded Safety Button Stops on each end so that your camera won't
accidentally roll off the Bar. The Bars also make a great focusing rail for macro photography.
The Heavy Duty Slide Bars are 18", 28", 38" total travel between the Safety Button Stops.
The Roller Blocks are 2" Wide x 3" long or 1.5 " to the center line of your lens.
Solid High Grade 6061 Aluminum Construction
Black Anodized Finish
HDSLB's are .5 in. thick and 2 in. wide at the base
All Bars are straight within .008 in. over the entire length
Multiple tapped holes ¼-20 are in the Bars for added support for tri- or monopods
All Bars have Large Bubble Levels
Roller Blocks are interchangeable and easily removable
Safety Button Stops
Heavy Walled Storage Container
Jaspers Vertical Bars adapt to all Roller Blocks
The 18" Bars can be linked together via an Adapter Block or Blocks to achieve any length desired
Made in the USA
18" Bar with two Roller Blocks & two Moveable Stops TBA
28" Bar with two Roller Blocks & two Moveable Stops TBA
38" Bar with two Roller Blocks & two Moveable Stops TBA
Extra Parts Prices
18" Bar Only TBA
28" Bar Only TBA
38" Bar Only TBA
All Bars come with End Safety Button Stops, Engraved Reference Lines, Bubble Levels
Roller Blocks Each TBA
Moveable Stops Pair (left & right) TBA
Adapter Block for Linking two 18" HD Bars, end to end and with 3/8-16 thread and 1/4-20 Brass TBA
Insert for Tripod Mounting
All Bars are packed and shipped in heavy duty, extra thick tubes which also serve as a
storage case or traveling container .
Shipping & Handling charges quoted on request.
Member of the National Stereoscopic
Association and the
Photographic Society of America
Virtual Reality and 3D
Page 1 of 1 Hardware Serrata Pty. Limited