Conveyor system XH

Document Sample
Conveyor system XH Powered By Docstoc
					Conveyor system XH                                                                                                               PO

System information                                                                                                               XS

                                                                                                                                 XL

                                                                                                                                 XLP

                                                                                                                                 X85

                                                                                                                                 X85P

                                                                                                                                 XH

                                                                                                                                 XK

                                                                                                                                 XKP

                                                                                                                                 XB

                                                                                                                                 GR

                                                                                                                                 CS

Chain width 103 mm                                                     Maximum weight on conveyor............ 150–300 kg         XT
                                                                       Maximum conveyor length ................. 30 m
The XH conveyor is
also available in a                                                                                                              XC
stainless steel version.
See page 343.
                                                                                                                                 XF

                                                                                                                                 FST

                                                                                                                                 XMY

Features                                                                                                                         XLX
Suitable for larger items, especially if point of balance is
somewhat offcenter. Higher capacity than XS and XL.                                                                              XMX

Examples of application areas                                                                                                    GRX
Large ball bearings, turbo rotors, safety belt brackets,
electric motors, shock absorbers, video cassettes, steer-                                                                        CSX
ing arm components, boxes.

                                                                                                                                 ELV
Technical characteristics
Drive unit capacity.............................. 1250 N                                                                         CTL
Chain tension limit.............................. 1250 N
Beam width ........................................ 105 mm
Chain width ........................................ 103 mm                                                                      TR
Chain pitch ......................................... 35,5 mm
Item width........................................... 25–300 mm                                                                  APX
Maximum item weight
  Horizontal transport.......................... 20 kg
  Vertical transport .............................. 15 kg                                                                        IDX

                                                            System information                                             117
Chains XH

Plain chain                                                   Steel top chain




Plain chain
  Length 5 m                       XHTP 5                     Steel top chain
Plain link kit *                   5056312                      Length 5 m                        XHTP 5 TF
Plain chain (Ultra low wear)                                  Steel top link kit *                5056594
  Length 5 m                       XHTP 5 C                   *Note. Link kit contains 10 links, 10 pivot, 10 steel pins.
Plain link (Ultra low wear)        n.a.
                                                              Cleated chain, Type A
*Note. Link kit contains 10 links, 10 pivot, 10 steel pins.

Friction top chain




                                                              Cleated chain, Type A cleats
                                                                Length 5 m
                                                                h=15 mm                           XHTF 5×15 A#
Friction top chain                                              h=20 mm                           XHTF 5×20 A#
  Length 5 m                                                    h=30 mm                           XHTF 5×30 A#
                                   XHTP 5 F#                    h=40 mm                           XHTF 5×40 A#
Enter cleat frequency (1–10) instead of # in product
designation.                                                  Enter cleat frequency (1–20) instead of # in product
                                                              designation.
Friction top link kit *            5056593                    Cleated link kit *
*Note. Link kit contains 10 links, 10 pivot, 10 steel pins.     h=15 mm                           5056595
                                                                h=20 mm                           5056596
Flat top friction chain                                         h=30 mm                           5056597
                                                                h=40 mm                           5056598
                   103                     5,6                *Note. Link kit contains 10 links, 10 pivot, 10 steel pins.

                                                              Roller top chain




Flat top friction chain
  Length 5 m                       XHTP 5 FA
                                                              Roller top chain
Flat top friction link kit *                                   Length 5 m                         XHTR 5
                                   5058544
*Note. Link kit contains 10 links, 10 pivot, 10 steel pins.   Roller top link kit *) **)          5056603
                                                              *Note. This link cannot be combined with plain links.
                                                              **Note. Link kit contains 10 links, 10 pivot, 10 steel pins.




118                                                   Chains XH
Chain with roller cleats                                                                                                 PO
                                                           Other chains
                                                           See the FlexLink chain guide for a selection of other
                                                           chains.                                                       XS

                                                           Chain installation                                            XL
                                                           See Appendix C, page 361, for installation instructions
                                                                                                                         XLP

Chain with roller cleats                                                                                                 X85
 Length 5 m                          XHTF 5×46 R#
Enter cleat frequency (1–20) instead of # in product                                                                     X85P
designation.
Link kit with roller cleats*         5056604                                                                             XH
Note. This type of chain requires minimum one plain link
between every cleated link.                                                                                              XK
*Note. 1 link XHTL 103x46 R with pivot and steel pin.

                                                                                                                         XKP
Chain accessories XH
                                                                                                                         XB
Plastic pivot                                               Lubricant for chain
                5056588                                               LDSS 450                                           GR

                                                                                                                         CS
Plastic pivots, kit XH (25 pcs)    5056588
                                                                                                                         XT
Steel pin
                                                            Silicone-based lubricant              LDSS 450
 XHTD 6×70
                                                                                                                         XC

                                                                                                                         XF

Steel pin, kit (25 pcs) XH         5111502                                                                               FST

Pin insertion tool for chain                                                                                             XMY

                                                                                                                         XLX

                                                                                                                         XMX

                                                                                                                         GRX
Pin insertion tool
  XH                                  XHMJ 6                                                                             CSX
  X85-XB-XH, PRO version*             XBMJ 6 P
*This tool is recommended for frequent users                                                                             ELV

                                                                                                                         CTL

                                                                                                                         TR

                                                                                                                         APX

                                                                                                                         IDX

                                               Chain accessories XH                                                119
Beams XH

Conveyor beam                                                    Profile for split conveyor beam
                         105                                                                        105
                                                  XHCB R



                                                                                 75 11
       75                                    11



                                                                 Profile for split conveyor beam
Beam                                                               Length 3 m (3030 ±5 mm)                     XHCB 3 H
 Length 3 m (3030 ±5 mm)       XHCB 3                              Length to order (30- 3000 mm)               XHCB L H
 Length to order (30- 3000 mm) XHCB L
Beam, reinforced                                                 Beam clip assembly
  Length 3 m (3030 ±5 mm)       XHCB 3 R
  Length to order (30- 3000 mm) XHCB L R
                                                                                                     30
Slide rail: see page 38
Beam accessories: see page 25
                                                                                                                 69
Beam section for chain installation                              Beam clip assembly                            XHCE 69×30
       80         160                  80                        Including M8 screw and locking nut. Use minimum 5
                                                                 clips per meter. Place clips 100 mm from each end.




Beam section for chain installation
 Including connection strips and
 screws                             XHCC 160


Beam accessories XH

Connecting strip with set screws                                 Beam spacer
                               L
                                                                                                                  h
                 a                 b        a
            6
  M8
                                                                      85
            h
                                                                           37
Connecting strip with set screws
 h=25, a=30, b=50, L=130                        XLCJ 6×130
 h=25, a=44, b=44, L=160                        XLCJ 6×160                                    3m                      4
Note. Must be ordered in multiples of 10
                                                                              XS          XL         X85/XH      XK
                                                                           h=16,0 mm   h=15,9 mm   h=10,5 mm   h=0,5 mm
Cover strip for T-slot, PVC
                                                                 Beam spacer
                     2
                                                                  Aluminium, anodized
                                                                  Length 3 m                                   XLCD 3
                         16                                      For connection of two conveyor beams side to side. Use
                                                                 M8 screw and slot nut. Two holes must be drilled, one
                                                                 through the spacer (9 mm) and one through the beam,
Cover strip for T-slot, PVC                                      to allow insertion of the screw. The diameter of the sec-
 Length 25 m                                XLAB 25              ond hole depends on the size of the screw head.
For XS-XL-XH




120                                                        Beams XH
Slide rails XH
                                                                                                                          PO
Plastic slide rails for XL, X85, XH beams                       Drill fixture for slide rail
                                                                                                                          XS
                  XLCR 25    XLCR 25 P/H XLCR 25 U
                                                                                                          ∅ d mm
                                                                                                                          XL
Slide rail
  Length 25 m
                                                                                                    60   15               XLP
  HDPE (μ=0,1–0,25) (Black)              XLCR 25                Drill fixture for XL-X85-XH-XK-XB
                                         XLCR 25 P              slide rail
  PVDF (μ=0,15–0,35) (Transparent
                                                                   d=4,2 mm
                                                                                                                          X85
  white)                                                                                             3920500
  UHMW-PE (μ=0,1–0,25)(White)            XLCR 25 U
  PA-PE (μ=0,1–0,25) (Grey)              XLCR 25 H              Rivet crimping pliers                                     X85P
See Appendix A, page 343 for selection guidelines and
assembly instructions.                                                                                                    XH

Steel slide rail for XL, X85, XH beams                                                                                    XK
   XLCR 3 TA
                                                                Rivet crimping pliers for XL-X85-XH-
                                                                XK-XB                                                     XKP
                                                                  For 4 mm rivets                         5051395
Slide rail (μ=0,15–0,35)
  Length 3 m                                                                                                              XB
                                                                Rivet crimping clamp
  Acid resistant stainless steel       XLCR 3 TA
                                                                                                                          GR
Mounting tool for slide rail
       XHMR 200                                                                                                           CS

Mounting tool for slide rail XH                                 Rivet crimping clamp for XL-X85-XH-XK-                    XT
                                       XHMR 200                 XB
                                                                  For 4 mm rivets                      3923005
Aluminium rivets                                                                                                          XC
                  XLAH 4×6
                                                                                                                          XF

                                                                                                                          FST
Aluminium rivets 4 mm for XL-X85-
XH conveyors
                                                                                                                          XMY
                                      XLAH 4×6
Extra slide rail in plain bends must be anchored using
plastic screws due to lack of space for the rivet crimping                                                                XLX
tool.
Note. Must be ordered in multiples of 250.                                                                                XMX
Plastic screws for slide rail
                                                                                                                          GRX

                                                                                                                          CSX

                                                                                                                          ELV
Plastic screws 5 mm for XS-XL-X85-
XH-XB beams                            XLAG 5                                                                             CTL
Note. Must be ordered in multiples of 50
                                                                                                                          TR

                                                                                                                          APX

                                                                                                                          IDX

                                                     Slide rails XH                                                 121
Slide rails XH, hardened steel

Steel slide rail, straight                                    Brass rivets

20                   3000
                                                  20                                 8

              365                                                                4
                                                1,5
                                                              Brass rivets (100 pcs)                 5056167
Slide rail, hardened steel                                    Rivets for anchoring the slide rails
  Length 3 m                        XLCR 3 TH
Delivered with 9 predrilled holes                             Cleaner 3M

Steel slide rail for bends



               45°            90°
 30°
                                                              Cleaner (100 sachets)                  5057207
                                          1,5     20          Use cleaner on beam and slide rail before attaching
  80          80                                              glue tape.

                                                              Glue tape 3M
Slide rail for bends, hardened steel
  Slide rail for bend, XH 30°          XHCR W30 TH
  Slide rail for bend, XH 45°          XHCR W45 TH
  Slide rail for bend, XH 90° & 180° XHCR W90 TH
180°: Use 2 pieces of steel slide rail 90°

                                                              Glue tape (for XL, X85, XH)
                                                               Length 30 m                           5057208




122                                         Slide rails XH, hardened steel
End drive units XH
                                                                                                                                  PO
End drive unit HL/HLA                                            End drive unit HR/HRA
                                                                                                                                  XS
                      80       248                  105                               80       248                   105
                                                                                                                                  XL
             43                                                               43
 270–280                                                           270–280
                                            297                                                              297                  XLP

                                                                                                                                  X85
                                      77                                                              77
                    670-720                        185                              670-720                           185
                                                                                                                                  X85P
End drive unit                                                   Drive unit
 Suspended 3-phase motor                                          Suspended 3-phase motor
 Transmission on left side                                        Transmission on right side
                                                                                                                                  XH
 50 Hz 230/400 V                           XHEB # HL              50 Hz 230/400 V                           XHEB # HR
 60 Hz 230/460 V                           XHEB # HLA             60 Hz 230/460 V                           XHEB # HRA            XK
Insert desired speed instead of # in designation:                Insert desired speed instead of # in designation:
50 Hz: 5-10-15-20-25-30-40-50-60 m/min.                          50 Hz: 5-10-15-20-25-30-40-50-60 m/min.              XKP
60 Hz: 6-10-13-15-17-22-24-29-35-39-44-53-62 m/min.              60 Hz: 6-10-13-15-17-22-24-29-35-39-44-53, 62 m/min.
Maximum traction force: 1250 N. See page 16.                     Maximum traction force: 1250 N. See page 16.
Effective track length: 0,80 m                                   Effective track length: 0,80 m                       XB

                                                                                                                                  GR
End drive units XH, direct drive with slip clutch
                                                                                                                                  CS
End drive unit HLP/HLAP                                          End drive unit HRP/HRAP
               80       248      70                                            80       248      70                               XT
                                      43                                                              43

                                           195                                                             195                    XC
                                             301                                                             301

                                                                                                                                  XF
                     345–465                                                         345–465

                                                                                                                                  FST

                                           355
                                                                                                           355
                                                                                                                                  XMY

                                                                                                                                  XLX
End drive unit                                                   End drive unit
 3-phase motor on left side                                       3-phase motor on right side                                     XMX
 50 Hz 230/400 V                             XHEB # HLP           50 Hz 230/400 V                                XHEB # HRP
 60 Hz 230/460 V                             XHEB # HLAP          60 Hz 230/460 V                                XHEB # HRAP GRX
Insert desired speed instead of # in designation:                Insert desired speed instead of # in designation:
50 Hz: 5-10-15-20-25-30-40-50-65 m/min.                          50 Hz: 5-10-15-20-25-30-40-50-65 m/min.
60 Hz: 7-10-16-20-32-38-46-66 m/min.                             60 Hz: 7-10-16-20-32-38-46-66 m/min.                             CSX
Maximum traction force: 1250 N. See page 16.                     Maximum traction force: 1250 N. See page 16.
Effective track length: 0,80 m                                   Effective track length: 0,80 m
Variable speed motors: see page 347.                             Variable speed motors: see page 347.                             ELV

                                                                                                                                  CTL

                                                                                                                                  TR

                                                                                                                                  APX

                                                                                                                                  IDX

                                                     End drive units XH                                                     123
End drive units XH Type H, direct drive, no slip clutch

End drive unit HNLP/HNLAP                                                 End drive unit HNRP/HNRAP
                         325               80                                                       325                80


            43                                                                         43

                                                  164                                                                        164


                                                    268                                                                           268


                     83         130   35                                                                   413


                                                  105                                                                        160




                                                  160                                                                        105


                               413                                                                83       130    35

End drive unit, max 1250 N                                                End drive unit, max 1250 N
 3-phase motor on left side                                                3-phase motor on right side
 50 Hz 230/400 V                                  XHEB # HNLP              50 Hz 230/400 V                                    XHEB # HNRP
 60 Hz 230/460 V                                  XHEB # HNLAP             60 Hz 230/460 V                                    XHEB # HNRAP
Insert desired speed instead of # in designation:                         Insert desired speed instead of # in designation:
50 Hz: 5-10-15-20-30-40-50-60 m/min.                                      50 Hz: 5-10-15-20-30-40-50-60 m/min.
60 Hz: 7-10-16-20-32-46-66 m/min.                                         60 Hz: 7-10-16-20-32-46-66 m/min.
Maximum traction force: see diagram, page 16.                             Maximum traction force: see diagram, page 16.
Effective track length: 0,80 m                                            Effective track length: 0,80 m
Variable speed motors: see page 347.                                      Variable speed motors: see page 347.


Double drive units XH

Double drive unit HLD/HLAD                                                Double drive unit HRD/HRAD
                                                                A                                                                       A
                    80         248                        105                                      80       248                             105

             43                                                                             43

  278–288                                                                    278–288                                        297
                                            297



                                      77                                                                               77
                  670–720                               185                                      670–720                                     185

Double drive unit                                                         Double drive unit
 Suspended 3-phase motor                                                   Suspended 3-phase motor
 Transmission on left side                                                 Transmission on right side
 A = 106 mm                                                                A = 106 mm                                        XHEB # HRD106
 50 Hz 230/400 V                                XHEB # HLD106              50 Hz 230/400 V                                   XHEB #
 60 Hz 230/460 V                                XHEB # HLAD106             60 Hz 230/460 V                                   HRAD106
  A = 150–350 mm*                                                           A = 150–350 mm*
  50 Hz 230/400 V                               XHEB # HLD–                 50 Hz 230/400 V                                  XHEB # HRD–
  60 Hz 230/460 V                               XHEB # HLAD–                60 Hz 230/460 V                                  XHEB # HRAD–
Insert desired speed instead of # in designation:                         Insert desired speed instead of # in designation:
50 Hz: 5-10-15-20-25-30-40-50-60 m/min.                                   50 Hz: 5-10-15-20-25-30-40-50-60 m/min.
60 Hz: 6-10-13-15-17-22-24-29-35-39-44-53-62 m/min.                       60 Hz: 6-10-13-15-17-22-24-29-35-39-44-53-62 m/min.
*Specify A separately when ordering                                       *Specify A separately when ordering
Maximum traction force: 1250 N. See page 16.                              Maximum traction force: 1250 N. See page 16.
Effective track length: 0,80 m                                            Effective track length: 0,80 m




124                                        End drive units XH Type H, direct drive, no slip clutch
Intermediate drive units XH
                                                                                                                                                  PO
Intermediate drive unit HL/HLA                                            Intermediate drive unit HR/HRA
                                                                                                          80      326                105
                                                                                                                                                  XS
                          80      326                       105

                53                                                                            53                                                  XL
                                                                                                                               307
 270–280                                           307
                                                                            270–280
                                                                                                                                                  XLP

                                        139
                                                                                                        720–790
                                                                                                                        139                       X85
                     720–790                              185                                                                         185
Intermediate drive unit                                                   Intermediate drive unit
  Suspended 3-phase motor                                                   Suspended 3-phase motor                                               X85P
  Transmission on left side                                                 Transmission on right side
  50 Hz 230/400 V                        XHER # HL                          50 Hz 230/400 V                             XHER # HR                 XH
  60 Hz 230/460 V                        XHER # HLA                         60 Hz 230/460 V                             XHER # HRA
Insert desired speed instead of # in designation:                         Insert desired speed instead of # in designation:                       XK
50 Hz: 5-10-15-20-25 m/min.                                               50 Hz: 5-10-15-20-25 m/min.
60 Hz: 6-9-12-15-18-26 m/min.                                             60 Hz: 6-9-12-15-18-26 m/min.
Maximum traction force: 200 N. See page 16.                               Maximum traction force: 200 N. See page 16.                             XKP
Effective track length: 1,00 m                                            Effective track length: 1,00 m
                                                                                                                                                  XB
Catenary drive units XH
                                                                                                                                                  GR
Catenary drive unit HL/HLA                                                Catenary drive unit HR/HRA
                                                                                                   80             685     80          185         CS
                     80           685         80            185
                                                                                                                  118                105
                                  118                        105                         43              248
               43         248
                                                                                                                                                  XT
     270-280                                                                   270-280


                                                   568                                                                         568                XC

                                                                                                                                                  XF
                      1025–1060                                                                     1025–1060

Catenary drive unit                                                       Catenary drive unit                                                     FST
 Suspended 3-phase motor                                                   Suspended 3-phase motor
 Transmission on left side                                                 Transmission on right side
 50 Hz 230/400 V                                                           50 Hz 230/400 V                                                        XMY
                                         XHEC # HL                                                                      XHEC # HR
 60 Hz 230/460 V                         XHEC # HLA                        60 Hz 230/460 V                              XHEC # HRA
Insert desired speed instead of # in designation:                         Insert desired speed instead of # in designation:                       XLX
50 Hz: 5-10-15-20-25 m/min.                                               50 Hz: 5-10-15-20-25 m/min.
60 Hz: 6-10-13-15-17-22-24-29 m/min.                                      60 Hz: 6-10-13-15-17-22-24-29 m/min.                                    XMX
Maximum traction force: 1250 N. See page 16.                              Maximum traction force: 1250 N. See page 16.
Effective track length: 1,35 m                                            Effective track length: 1,35 m
                                                                                                                                                  GRX

                                                                                                                                                  CSX

                                                                                                                                                  ELV

                                                                                                                                                  CTL

                                                                                                                                                  TR

                                                                                                                                                  APX

                                                                                                                                                  IDX

                                                         Intermediate drive units XH                                                        125
Horizontal bend drive unit XH

Horizontal bend drive unit, 180°


                                                       125


  340
                                                             340




                                      140
                                                230
              80
                   80

Horizontal bend drive unit, 180°
  50 Hz 230/400 V                 XHEW 180/# H
  60 Hz 230/460 V                 XHEW 180/# HA
Insert desired speed instead of # in designation:
50 Hz: 5-10-15-20-25-30 m/min.
60 Hz: 5-10-12-16-19-21-25-30 m/min.
Maximum traction force: 200 N. See page 16.
Effective track length: 0,65 m


Idler units XH

Idler end unit                                                     Idler bend unit, 90°
                                                                                 113      80       315

        105              80      325




                                                                                                             315
                                                       160




Idler end unit                        XHEJ 325
Effective track length: 0,80 m                                     Idler bend unit, 90°            XHEK 90R50
                                                                   Effective track length: 0,65 m.
Protective cover for idler end unit                                Note. Cannot be used with return chain.



                         63,5

                   195
                         35,3




Protective cover for idler end unit         XHSJ 195




126                                              Horizontal bend drive unit XH
Wheel bends XH
                                                                                                                        PO
Wheel bend, 30°                                             Wheel bend, 45°
                                                                                                                        XS
 Æ275
                                                            Æ275                                         >160           XL
                                           >160


                                                                                                                        XLP
                            80
                                                                                          80
                                 80
                                                                                           80
                                                                                                                        X85
               170
                                                                             170
                                                                                                                        X85P
Wheel bend, 30°                       XHBH 30R170 A         Wheel bend, 45°                         XHBH 45R170 A
Effective track length: 0,25 m 1-way (0,50 m 2-way)         Effective track length: 0,30 m 1-way (0,60 m 2-way)         XH
Wheel bend, 90°                                             Wheel bend, 180°
                                                                                                                        XK
        80                                                    Æ275


                                         >160                                                           >160            XKP

                                                                                                                        XB
                                                                                               80
                            80
                                                            80                                                          GR
 Æ275
                                                                             340
               170                                                                                                      CS
                                                            Wheel bend, 180°                        XHBH 180R170 A
Wheel bend, 90°                       XHBH 90R170 A
                                                            Effective track length: 0,65 m 1-way (1,30 m 2-way)         XT
Effective track length: 0,40 m 1-way (0,80 m 2-way)
                                                            Wheel bend, 30°–180°
Wheel bend, 210°                                                                                                        XC
                                                                        80
        80
                                                                                     E°
                     ∅275                                                                                >160
                                                                                                                        XF
 170
                                                                                                                        FST
                                                                                           80
                                                                                                                        XMY
                                                                 Æ275
   80                                                                          170                                      XLX
                                                            Wheel bend, 30°–180°                     XHBH ER170 A
Wheel bend, 210°                      XHBH 210R170 A
                                                            The outer bend is cut in the middle to the desired angle XMX
Effective track length: 0,80 m 1-way (1,60 m 2-way)         and assembled using connecting strips. The angle “E”
                                                            must be specified when ordering.
                                                                                                                        GRX

                                                                                                                        CSX

                                                                                                                        ELV

                                                                                                                        CTL

                                                                                                                        TR

                                                                                                                        APX

                                                                                                                        IDX

                                                  Wheel bends XH                                                  127
Horizontal plain bends XH

Horizontal plain bend, 30°                                 Horizontal plain bend, 45°
            80                                                         80


                                     200


                                                                                                 200

                     R                                                          R



                           30°
                                                                                    45°



Horizontal plain bend, 30°±1°                              Horizontal plain bend, 45°±1°
 R=500±10 mm                     XHBP 30R500                R=500±10 mm                    XHBP 45R500
 R=700±10 mm                     XHBP 30R700                R=700±10 mm                    XHBP 45R700
 R=1000±10 mm                    XHBP 30R1000               R=1000±10 mm                   XHBP 45R1000
Effective track lengths:                                   Effective track lengths:
R500: 0,70 m 1-way (1,35 m 2-way)                          R500: 0,80 m 1-way (1,60 m 2-way)
R700: 0,80 m 1-way (1,55 m 2-way)                          R700: 0,95 m 1-way (1,90 m 2-way)
R1000: 0,95 m 1-way (1,85 m 2-way)                         R1000: 1,20 m 1-way (2,40 m 2-way)

Horizontal plain bend, 60°                                 Horizontal plain bend, 90°
       80                                                          80




                 R                                                          R
                                           200



                         60°
                                                                                    90°


Horizontal plain bend, 60°±1°
                                                                                                       200
 R=500±10 mm                     XHBP 60R500
 R=700±10 mm                     XHBP 60R700
 R=1000±10 mm                    XHBP 60R1000
Effective track lengths:
R500: 0,95 m 1-way (1,85 m 2-way)                          Horizontal plain bend, 90°±1°
R700: 1,15 m 1-way (2,30 m 2-way)                           R=500±10 mm                    XHBP 90R500
R1000: 1,45 m 1-way (2,90 m 2-way)                          R=700±10 mm                    XHBP 90R700
                                                            R=1000±10 mm                   XHBP 90R1000
                                                           Effective track lengths:
                                                           R500: 1,20 m 1-way (2,40 m 2-way)
                                                           R700: 1,50 m 1-way (3,00 m 2-way)
                                                           R1000: 2,00 m 1-way (3,95 m 2-way)




128                                        Horizontal plain bends XH
Support rail for plain bends XH
                                                                                                                              PO
Support rail for plain bends
                                                                                                                              XS

                                                                                                                              XL

                                                                                                                              XLP
          16
                                                                                                                              X85
                   10,5
Support rail for plain bends, XH                                                                                              X85P
 Length 2,4 m
 Polyamide                                   5048598                                                                          XH
Fix with sheet metal screw ISO 7049 4,2×9,5 or similar.
See page 355 for installation instructions.                                                                                   XK

Vertical bends XH                                                                                                             XKP

Vertical bend, 5°                                                 Vertical bend, 15°                                          XB
                          80   5°
                                        80                                                  80     15
                                                                                                          80                  GR
               9
                                                                                  34
                                                                                                                              CS
                                                                                                  R400
                                R400

                                                                                                                              XT

                               195
                                                                                                  261                         XC
Vertical bend, 5°                      XHBV 5R400                 Vertical bend, 15°                      XHBV 15R400
Effective track length: 0,20 m 1-way (0,40 m 2-way)               Effective track length: 0,30 m 1-way (0,55 m 2-way)
                                                                                                                              XF

Vertical bend, 7°                                                 Vertical bend, 30°                                          FST
                          80   7°                                                      80
                                        80                                                          30°
                                                                                                                              XMY
               13
                                                                             94                                80


                                                                                                 R400
                                                                                                                              XLX
                                R400


                                                                                                                              XMX
                               208                                                                349                         GRX
Vertical bend, 7°                      XHBV 7R400                 Vertical bend, 30°                      XHBV 30R400
Effective track length: 0,20 m 1-way (0,45 m 2-way)               Effective track length: 0,40 m 1-way (0,75 m 2-way)         CSX

                                                                                                                              ELV

                                                                                                                              CTL

                                                                                                                              TR

                                                                                                                              APX

                                                                                                                              IDX

                                               Support rail for plain bends XH                                          129
Vertical bends XH (continued)

Vertical bend, 45°                                                                   Vertical bend, 90°
                               80                                                                      80
                                                   45°
                                                                                                                         90°


            B
                                                                     80                                          R

                                      R


                                           A                                                                                     80

Vertical bend, 45°                                                                                               A
 R= 400, A=419, B=174                               XHBV 45R400
 R=1000, A=844, B=349                               XHBV 45R1000                     Vertical bend, 90°
                                                                                      R= 400, A= 480                           XHBV 90R400
Effective track length:                                                               R=1000, A=1080
R400: 0,50 m 1-way (0,95 m 2-way)                                                                                              XHBV 90R1000
R1000: 0,95 m 1-way (1,90 m 2-way)                                                   Effective track length:
                                                                                     R400: 0,85 m 1-way (1,60 m 2-way)
Vertical bend, 60°                                                                   R1000: 1,75 m 1-way (3,50 m 2-way)

                          80                                                         Vertical bend, 5°–90°
                                               60°                                            80
                                                                                                            E°
                                                                                                                                      9
      269
                                    R400

                                                                80                                                       80
                                                                                                   R


                                    466
                                                                                     Vertical bend, 5°–90°
Vertical bend, 60°                                  XHBV 60R400                       R=400                                    XHBV ER400
Effective track length: 0,65 m 1-way (1,20 m 2-way)                                   R=1000                                   XHBV ER1000
                                                                                     The bend is cut in the middle to the desired angle and
                                                                                     assembled using connecting strips. The angle “E” must
                                                                                     be specified when ordering.
Angle plates XH

Angle plate, straight                                                                Angle plate for 180° bend

       40

                18

                                                                                            40
                                                                                                                               180°
Angle plate                                                                                                                               80
 Length 3 m                                              XHRP 3                              A-A             A       A

Angle plate for 90° bend                                                             Angle plate for 180° bend
                                                                                      Used with XHBH 180R170 and
                                                                                      XHEW 180/5 H
                                                                80                    Inner radius 222,5 mm                    XHRM 180
                     40
                                                          90°

                     A-A                       A     A

Angle plate for 90° bend
 Used with XHBH 90R170
 Inner radius 222,5 mm                                   XHRM 90


130                                                                       Angle plates XH
Front piece XH
                                                                                                                        PO
Front piece                                                 Linkage kit for front piece
                                                                                                                        XS
                                                                   D
                            105
                                                                                                                        XL
           11                               27                                            160                   15–85
                                                                                                                        XLP

Front piece
                                                                                                                        X85
                                                                         W                             80
  Length 3 m                             XHVF 3
                                                            Linkage kit                                                 X85P
Sliding strip for front piece                                 W=190, D=43                             XHVK 43
                                                              W=290, D=93                             XHVK 93           XH
                                                            Kit consists of two support pairs.

    3                                                                                                                   XK
                                                            Bend support for front piece
                                                                         D                            30                XKP
Sliding strip for front piece
  Length 2 m                             XHVG 2                                                                         XB
                                                                                                150
Front piece upper bend                                                                                      9           GR

                                                                                                                        CS

                                                            Bend support                                                XT
                          R460                               D=43 mm                                  XHVS 43
                                                             D=93 mm                                  XHVS 93
                                                                                                                        XC
                                  80
                                                                                                                        XF

Upper bend, 60°
                                                                                                                        FST
                                         XHVA 60R460
Includes connecting strip with screws
                                                                                                                        XMY
Front piece lower bend
                                                                                                                        XLX

                          80                                                                                            XMX

                                                                                                                        GRX
                                  R335
                                                                                                                        CSX

                                                                                                                        ELV
Lower bend, 60°                          XHVB 60R335
Includes connecting strip with screws                                                                                   CTL

                                                                                                                        TR

                                                                                                                        APX

                                                                                                                        IDX

                                                  Front piece XH                                                  131
Drip trays XH

Drip tray                                                           End pan for drip tray
                 147                                                                  147             112


                                                                                            ∅21



                                                                                            R1/2"


                                                                    End pan for drip tray
                                                                     With drip outlet               XHDE 147 B
Drip tray
 Length 3 m                                      XHDT 3×147 B       Including screw kit

Drip tray bracket                                                   End cap for drip tray
                                                                                     72
                                                   62
                                     ∅9
                                    ∅8,5

                                                                                                    117 147
                              100                 35




                       21,5
                                                                    End cap for drip tray           XHDC 147 B
                                           30
                                                                    Including screw kit
Drip tray bracket                                XLDB 21×100

Drip tray connector




Drip tray connector
 With drip outlet                                XHDJ 147 B
Including screw kit

Connecting strip
                  5                        140



            M8         20




Connecting strip with set screws                 XLCJ 5×140
Note. Must be ordered in multiples of 10




132                                                       Drip trays XH
Drip catchers XH
                                                                                                                                  PO
Drip catcher 53 mm                                                    Drip catcher bracket assembly
                                                                                                                                  XS

                                                                                                  28 22,5                         XL
                                                                                                          17
                                                                         48
Drip catcher 53 mm
 Length 3 m                                                                                                                       XLP
                                            XHDS 3×53

Drip catcher 83 mm                                                                  50                                            X85
                                                                      Drip catcher bracket assembly            XHDR 23
                                                                                                                                  X85P
                                                                      Including T-bolts and nuts

Drip catcher 83 mm                                                                                                                XH
 Length 3 m                                 XHDS 3×83
                                                                                                                                  XK
Drip pans XH
                                                                                                                                  XKP
Drip pan for wheel bend 90°                                           End pan for idler end unit
                                                                                            147
                                                                                                                                  XB
                                                                                                             174
                                                          147

       170                                  ∅21                                                                                   GR

                                                                                                  434 ∅21
                                                                                                                                  CS
                                        R1/2"

                                                                                                                                  XT
                                                                                                     R1/2"
                  225
                                                    120
                                                                                                                                  XC
Drip pan for wheel bend 90°                 XHDH 90×147 B             End pan for idler end unit
                                                                       With drip outlet                        XHDD 147 B
Including screw kit                                                                                                               XF
                                                                      Including screw kit
Drip pan, upper, for 90° vertical bend
                                                                                                                                  FST
                                                  147

                                                                                                                                  XMY

                                                                                                                                  XLX
                        310

                                                                                                                                  XMX
                              R1/2"   ∅21
             80
                                                                                                                                  GRX
Drip pan, upper, for 90° vertical
bend
  With drip outlet                     XHDV 90×147 B                                                                              CSX
Including screw kit
                                                                                                                                  ELV

                                                                                                                                  CTL

                                                                                                                                  TR

                                                                                                                                  APX

                                                                                                                                  IDX

                                                           Drip catchers XH                                                 133
134   Drip pans XH

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:50
posted:4/15/2011
language:Albanian
pages:18