Get documents about "DYNAMIC NT SYSTEM
Document Sample
DYNAMIC NT SLIDE SYSTEM
Concealed roller bearing slides for
superior wooden drawer boxes.
2
Dynamic NT
Concealed roller bearing slides for 3 and 4 sided
wooden drawer boxes.
System Information
Drawer slides
Organizing systems
Single and full extension slides with integrated Dynamic NT undermount slides, precise and
Mounting Aids
Soft-close soft closing system. dependable.
Dynamic NT roller bearing slides convince through • Soft and controlled closing of the drawer through
superior running conditions: Soft-close technology
With ease you can extend the drawer, and with a gentle • 40 kg load capacity with all Dynamic NT
push the slides glide back into the closed position. full extension slides
Soft-close slows your drawer softly down and closes it • Height adjustment within the front bracket
quietly until it stops. • The integrated tolerance compensation compensates
The Dynamic NT is a unique element in your cabinet side tolerance of the cabinet with ease
that your customer will appreciate. • System compatibility,single and full extension are
Information
Technical
completely interchangeable.
Dynamic NT means innovation in drawer slide • Efficient installation with slide-on mounting
technology.
New features of the Dynamic principle guarantee excel-
lent running conditions and side stability.
Dynamic NT full extension slides with 40 kg load capa-
city cover all requirements that are needed when using
an undermount slide on a wooden drawer box.
3
Concealed full extension slide, 40 kg
Slide-on mounting with integrated
Soft-close or Self-close.
• Full extension , 40 kg load capacity (based on 500 mm slide)
• Soft-close soft closing system
• Self-close, alternative
• Self adjusting of drawer when sliding on slide
• Integrated height adjustment, tool-less +2.5 mm
Dynamic NT Full extension, 40 kg
Nominal length Ref. No. Soft-close Ref. No. Self-close
250 7012.250
270 7002.270
300 7002.300 7012.300
350 7002.350 7012.350
400 7002.400 7012.400
450 7002.450 7012.450
500 7002.500 7012.500
550 7002.550 7012.550
N 600 7002.600
N 650 7002.650
PU/Packing Unit PU 5 PU 5
VPE 5 = 5 pairs per box N Carrying capacity for excessive lengths 30 kg dyn.
Front fixing bracket with integrated height adjustment
Ref. No. Ref. No.
(Please order separately) 7900.VE1AA 7900.VE10AA
PU/Packing Unit PU 1 PU 10
PU 1 = 1 set, l/r
PU 10 = 10 set
4 sided drawer 3 sided drawer Inset drawer
Accessories and Mounting Aids
Dynamic NT Single extension Page 6 Mini Sidewing Page 10 Mounting Aids Page 14
Dynamic NT Tipmatic Plus Page 8 - 9 Magic Sorto Page 12 Technical Information Page 16
4
NL Drawer length Min. installation depth Drawer Inset drawer
250 240 250
System Information
270 260 270
300 290 300
350 340 350
400 390 400
450 440 450
500 490 500
550 540 550
600 590 600 SK = Drawer length
650 640 650 NL = Nominal length of slide
Drawer slides
Drawer cut-outs and borings Cabinet fixing positions
Front edge of cabinet
160
96
250
Organizing systems
Back Back
270
Drawer installation measurements
224
300
128
350
Zuschnittmaße Blendenprofil und Reling
192
Mounting Aids
400
288
450
500
Information
Technical
LSB = Inside drawer width 550
LW = Inside cabinet width
Identical mounting positions for single and full extension slides.
600
650
14 28
32
352 37
Single extension Full extension
on page 6
All measurements in millimeter.
5
Concealed single extension slide, 30 kg
Slide-on mounting with integrated
Soft-close or Self-close.
• Single extension , 30 kg load capacity (based on 500 mm slide)
• Soft-close soft closing system
• Self-close, alternative
• Self adjusting of drawer when sliding on slide
• Integrated height adjustment, tool-less +2.5 mm
Dynamic NT Single extension, 30 kg
Nominal length Ref. No. Soft-close Ref. No. Self-close
250 7512.250
300 7502.300 7512.300
350 7502.350 7512.350
400 7502.400 7512.400
450 7502.450 7512.450
500 7502.500 7512.500
550 7502.550 7512.550
PU/Packing Unit PU 10 PU 10
VPE 10 = 10 pairs per box
Front fixing bracket with integrated height adjustment
Ref. No. Ref. No.
(Please order separately) 7900.VE1AA 7900.VE10AA
PU/Packing Unit PU 1 PU 10
PU 1 = 1 set, l/r
PU 10 = 10 set
4 sided drawer 3 sided drawer Inset drawer
Accessories and Mounting Aids
Dynamic NT Full extension Page 4 Mini Sidewing Page 10 Mounting Aids Page 14
Dynamic NT Tipmatic Plus Page 8 - 9 Magic Sorto Page 12 Technical Information Page 16
6
NL Drawer length Min. installation depth Extension loss Drawer Inset drawer
250 240 250 52
System Information
300 290 300 52
350 340 350 63
400 390 400 63
450 440 450 74
500 490 500 96
550 540 550 107
SK = Drawer length
NL = Nominal length of slide
Drawer slides
Drawer cut-outs and borings Cabinet fixing positions
Front edge of cabinet
160
96
250
Organizing systems
Back Back 224
300
Drawer installation measurements
128
350
192
400
Mounting Aids
450
500
9
550
14 28
Information
Technical
LSB = Inside drawer width 18
LW = Inside cabinet width 288 37
Identical mounting positions for single and full extension slides.
Single Full extension
extension on page 4
All measurements in millimeter.
7
Dynamic NT Tipmatic Plus
The full extension for handle-free furniture design.
• Top Grass running performance
• Load capacity up to 40 kg
• Tool-free height adjustment
• Simple drawer insertion and removal
• Convenient opening and closing of the drawer or pull-out by gently tapping at any point over
the entire width of the front.
• The unique and synchronised locking mechanism makes closing thdrawer a delightful
and satisfying experience for the user.
• Comfortable access to drawer contents thanks to the large opening distance.
• Convenient front gap adjustment by means of eccentric element: ±1.5 mm
Dynamic NT Tipmatic Plus full extension
Ordering information 1 Dynamic NT Tipmatic Plus 2 Synchronisation unit Assembly aids
For a pair, you will need to order one Lengths full extension 68257-04 Drawer drill jig 66836-00
Grass Dynamic NT Tipmatic® Plus full 270 71090-03 Cabinet member drill jig 95253
extension as well as Grass snap-in 300 71091-03 3 Locking units Pilot drill 35692
devices, locking units and synchroni- 350 71092-03 71115-03 Drill bit with stop ring 92594
sation bars. One packing unit of full 400 71093-03 Drilling jig for the
extensions consists of 5 pairs. One 450 71094-03 4 Dynamic NT Tipmatic Plus back panel adapter 71098-01
500 71095-03 Set of 5 snap-in devices 67897-03 Drilling jig for
set of snap-in devices consists of 5
550 71096-03 Set: 5 left and 5 right the locking unit 71097-01
left-hand and 5 right-hand devices.
Packing unit 5 pairs 200 snap-in devices 67897-12
One set of locking units consists of
Box of 200 snap-in devices containing
5 pairs of locking units and 5 pairs
packs of 5 pairs each
of back panel adapters. One set of
synchronisation units consists of 10
synchronisation bars, length 1079
mm, and 20 synchronisation levers. 2
3
1
4
Accessories and Mounting Aids
Dynamic NT Full extension Page 4 Magic Sorto Page 12 Mounting Aids Page 14
Mini Sidewing Page 10 Technical Information Page 16
8
Dimension diagram of the drawer Assembly of the snap-in device Drill hole pattern (detail)
System Information
min 5
Drawer lenght = Nominal length -10 mm 9 99 9
7,3
12
Height adjustment
+2,5 mm
max. 16
5
37 32
dia 6/11 deep 7.5
27
11.5
60
Cabinet member fastening
9.5
22
27
12
10-13
Euro screw:
38
28.5
dia. 6 x at least 13 mm
with dia. 7 mm countersunk head
Drawer slides
Inside drawer width = ICW-42 ±1.5mm (21)
Installation depth = Nominal length + 26
Inside cabinet width (ICW)
Drawer Drill hole pattern – cabinet members
4,5 ±1,5
SK = NL - 10
250 ±0,3
min. 12
Nominal 160
35,3 ±0,3
96
length
Organizing systems
35,5
32
270
280 ±0,3
35,3 ±0,3
224
21
21
37 NL - 20 300
Minimum installation depth = NL + 26
330 ±0,3
35,3 ±0,3
128
Adapter drill holes 350
380 ±0,3
±0,3
192
35,3
400
430 ±0,3
35,3 ±0,3
Mounting Aids
288
10
450 35,3 ±0,3
480 ±0,3
24,5
500
±0,3
530 ±0,3
12
35,3
17 550
28 14
32
37
Minimum installation depth = NL + 26
Front gap adjustment
Information
Technical
4,5 (±1,5)
Cutting the
synchronisation
2
+ bar to size
ICW - 97
–
All measurements in millimeter.
9
Magic Mini Sidewing
Organizing system for tall wooden drawers.
• Optimum space organisation for tall drawers
• Tool-less mounting
• Adjustable elements for individual arrangement
possibilities
• Easy to cut to size Aluminium Dividing Rails
Magic Mini Sidewing
Ref. No. alu-grey
12650
PU/Packing Unit PU 4
PU 4 = 4 pcs.
Magic Classic Dividing Set
Cabinet width in mm Ref. No. alu-metallic
600 12700.495.17
1200 12700.1095.17
PU/Packing Unit PU 1/25
PU 1/25 = 1 set per bag / 25 sets per box
Magic Dividing Set Magic Dividing Set
600 mm 1200 mm
1 set for 600 cabinet width consists of: 1 set for 1200 cabinet width consists of:
2 Length Rails 462 mm 3 Length Rails 462 mm
2 Divider Rails 495 mm 2 Divider Rails 1095 mm
4 Fixing parts 6 Fixing parts
Accessories and Mounting Aids
Dynamic NT Full extension Page 4 Dynamic NT Tipmatic Plus Page 8 - 9 Technical Information Page 16
Dynamic NT Single extension Page 6
10
Mounting measurements Magic Mini Side Wing
System Information
40
12
38
32
120
Drawer slides
32
Magic Classic Dividing Set
X
Organizing systems
Y
cut to size
Mounting Aids
Length Rail Divider Rail
Y = Drawer interior length -14 mm X = Drawer interior width -41 mm
Information
Technical
Drawer interior width
X
Y
Drawer interior length
All measurements in millimeter.
11
Magic Sorto
Organizing system for wooden drawers.
• Modular-based expandable system
• Individual components, dishwasher resistant
• Safe for foods, hygienically approved
• Trays made of stainless steel, Divider supports
alu-metallic, plastic components alu-grey
Magic Sorto Set
Ref. No. alu-metallic
1 Magic Sorto set NL 550 B3 12039.550.17
2 Magic Sorto set NL 550 B4 12049.550.17
PU/Packing Unit PU 1
PU 1 = 1 set
Sorto trays: stainless steel, plastic parts light-grey
Divider Support: alu-metallic, plastic parts light-grey
1 Magic Sorto Set NL 550 B3 2 Magic Sorto Set NL 550 B4
NL 550 and cabinet widths NL 550 and cabinet widths
from 450 mm or more. from 600 mm or more.
Consisting of: Consisting of:
3 Sorto trays 270 x 90 mm 4 Sorto trays 270 x 90 mm
3 Sorto trays 180 x 90 mm 4 Sorto trays 180 x 90 mm
1 Divider Support 1 Divider Support
Accessories and Mounting Aids
Dynamic NT Full extension Page 4 Dynamic NT Tipmatic Plus Page 8 - 9 Technical Information Page 16
Dynamic NT Single extension Page 6
12
Installation measurements for wide cabinets 400 and 450 mm depth Installation measurements for wide cabinets 500 and 550 mm depth
System Information
D D
362 362
A DIL
DIL
65.5 65.5
DIL -363 mm DIL -454 mm
DIL = Drawer
Interior Length
Drawer slides
Installation measurements for small cabinets 400 und 450 mm depth Installation measurements for small cabinets 500 and 550 mm depth
271 181
271 181
Organizing systems
Divider Support cut to size Sorto trays 180, 270 mm
B End Cap
Mounting Aids
Spring Loaded
C 90.5
Divider Support 181
65
DIL -87 mm 271.5 Information
Technical
Cut to size
Legend
A Measure drawer interior length (DIL). Remove spring loaded end caps to aluminum.
B Cut aluminum bar (length = DIL -87 mm).
C Attach spring loaded end caps to aluminum profile.
D Cut wooden spacer.
All measurements in millimeter.
13
Mounting Aids
for Dynamic NT.
7990 Boring jig for rear hook and front fixing bracket borings
For rear hook and front fixing Ref. No.
bracket borings 7990
PU 1
PU/Packing Unit 1 = 1 pc.
Ø 2,5 mm
Ø 2,5 mm
Ø 6 mm
Accessories and Mounting Aids
Dynamic NT Full extension Page 4 Dynamic NT Tipmatic Plus Page 8 - 9 Technical Information Page 16
Dynamic NT Single extension Page 6
14
Drill bit
System Information
Drill bit for boring jig Ref. No.
7990 7992
PU 1
PU/Packing Unit 1 = 1 set
1 set consisting of:
1 Shaft, 3 Drilling bit 2,5 mm, 1 Allen key
191 / 192 Euro screw, nickel plated
Ref. No. / Ø 6,3 x 10,5 mm Ref. No. / Ø 6,3 x 14 mm
Drawer slides
Ø 6.3
191 192
PU 1000 PU 1000
Length Ø 7.1
PU/Packing Unit 1000 = 1000 pcs.
198 Wood screw, nickel plated
Ref. No. / Ø 3,5 x 15 mm
Organizing systems
Ø 3.5
198
PU 1000
15 Ø7
PU/Packing Unit 1000 = 1000 pcs.
Mounting Aids
Information
Technical
15
Technical Information
for Dynamic NT.
Drawer insertion
Place onto extended Dynamic NT
drawer slides and close.
Height adjustment Drawer removal
Integrated tool-less height adjust- Extend drawer, press the lever
ment up to 2.5 mm. of the front fixing bracket and
remove the drawer from the
Dynamic NT slides.
Side tolerance
Side tolerance ±1,5 mm.
Information
Fixing of cabinet members:
The specified data is based on reference particle board according to DIN 68858, MDF and hardwood.
If other types of woods and qualities are used, please consider the proper screw type as well as numbers of screws used.
16
Notes
17
Technical Mounting Aids Organizing systems Drawer slides System Information
Information
Notes
18
Notes
19
71172-00 – 05|2009 – 5.000 (ENG) – GRASS Advertising All errors and omissions excepted
Grass GmbH
Movement Systems
Grass Platz 1
A 6973 Höchst, Österreich
Telefon +43 (0) 5578 701-0
Telefax +43 (0) 5578 701-59
E-Mail info@grass.eu
