Users Guide for the Striker Oil Change Reminder System

Report as inappropriate Your report has been received

Shared by: mikesanye

Tags

Stats

views:: 14
posted:: 4/12/2011
language:: English
pages:: 4

Public Domain

Document Sample

Striker Kit Includes:
Please ensure that all items are included.

√ Printer
√ Keypad
Users Guide for the √ A/C Power Supply
√ Ribbon (inside printer)
Striker Oil Change √ Stickers (inside printer)
Reminder System √ User Guide Manual

Setup:
1. Plug the power cord (A/C Power Supply) into
1 the power jack at the rear of the printer.

2. Plug the Keypad cable into the RS232 Port on
2 the back of printer.
Note: Make sure Power is OFF during ribbon and
sticker installation.
1. Plug the power cord into the power jack.
2. Plug the keypad cable into the RS232 Port on the back
of the printer. READ NOTE 3. Open the cover on printer and install the print
ribbon.
3a 3a a) Open the dust cover
b) Release print head mechanism
c) Put ribbon supply on spindle and place
on supply roll
d) Install the take up core in the same way
as the supply roll
e) Make sure larger core ends are on the
right side as shown in diagram 3e

3b 3b 3c 3c 3e

3. a) Open the dust cover by pressing the two latches 3. c) Put ribbon on spindle and place on the supply roll. First place
on both sides of the cover. b) Release the print head spindle on Spring Side (left) then push to click into place. d) Install
mechanism by lifting the Green Lever on the left side the take up core in the same way as the supply roll. e) Make sure the
(while facing printer) of printer. larger core end of the spool are on the right side, not the left.

Note: When ribbon runs out Keep Paper Core for take up on next ribbon!
i) Place an empty paper core onto the ribbon rewind spindle. Using an empty paper core could cause a printing error. ii) Install ribbon on
the ribbon supply spindle in the direction so that the ribbon routes as described in step iv. iii) Disengage the printer carriage by pulling
the carriage release lever upwards. iv) Following the direction of the ribbon sign inside the printer, pull the transparent ribbon leader to
the front from under the ribbon mechanism. Attach the ribbon leader to the empty paper core on the ribbon rewind spindle (with tape).
v) (Manually) rotate the ribbon rewind spindle until the ribbon overlaps the ribbon leader and stretches tight. Engage printer carriage.

NEED TO REORDER PRINT RIBBONS AND LABELS? CALL 800-262-7298 AND ORDER TODAY
Setup:
4. Install the label roll
4a 4b
Note: When installing labels, make sure the labels
are coming out of the printer face up and
always double check print head mechanism to
ensure it’s closed completely.
a) Slip the label supply spindle into the label
roll. Attach the fixing tabs onto the label
supply spindle. Place the label onto the
label roll mount.

4c 4d b) Disengage the printer carriage by pulling
the carriage release lever upwards.

c) Install the label so that it goes in the
direction of the label sign inside the
printer and under the ribbon mechanism
to lay upon the platen.

d) Adjust the label guides to fit the width
of the label (not too tight). Make sure
4e 4f green chip is above label.

e) Engage the printer cartridge.

f) Close the dust cover and turn the printer
on.

Administrative:
The Administrative portion of the setup is designed to input information permanently into the printer such as
your Company Name and Address. The information will remain intact even if the power is removed.
1. After turning the printer on, your screen will read “Print Label”, press the down or the up arrow key to
go to “Administrative” and press Enter.
2. Your display will now read “Company Info Setup” press Enter, and follow the instruction prompts for
entering your company information.
3. You will enter the Company Name, Address and Phone Number.
4. After entering all of your company’s info, the keypad will display “Storing...” and will return to “Company
Info Setup”. Press the down arrow key to “Exit Setup” and press Enter to start printing labels.
All information will now be automatically retained for future printing needs. This procedure can be followed
again if any of the existing company information changes.

NEED TO REORDER PRINT RIBBONS AND LABELS? CALL 800-262-7298 AND ORDER TODAY
Printing Labels:
1. Turn printer on
2. Your display should read “Print a Label”
3. Press Enter, the display will read “Standard Label” (whenever you press Enter, the action may take a few seconds
so be patient)
4. You can arrow up or down to desired label formats and press Enter
a) Standard Label
b) Synthetic Label
c) Tire Rotation
d) Standard Coupon
e) Synthetic Coupon
f) Custom Label
5. After the label prints, you will be able to press enter to select the same format, or toggle up or down to select
a different format.

Oil Change Label Formats:
Oil Shop
12345 E Oil St
Oilville, CA 12345
1) Standard Label
Your Next Service is Due: (800) 555-5555
- Automatically adds 3,000 miles and 3 months for return service, includes
Mileage: 3000
Date: 11/04/07 optional customer message, Have a Nice Day!
Grade: 10W30
Receive $3.00 Off! 2) Synthetic Label
Discount When Return Within
500 Miles of Mileage Above
- Automatically adds 5,000 miles and 5 months for return service, includes
Oil Shop
12345 E Oil St optional customer message
3) Standard Label with Discount Coupon
Oilville, CA 12345
Your Next Service is Due: (800) 555-5555

Mileage: 5000
Date: 11/04/07 - Same as standard label but includes variable discount coupon when returned
Grade: S10W30
Receive $3.00 Off!
within 500 miles of return service mileage (does not include optional customer
message)
Discount When Return Within
500 Miles of Mileage Above

Oil Shop
12345 E Oil St
4) Synthetic Label with Discount Coupon
Your Next Service is Due:
Oilville, CA 12345
(800) 555-5555 - Same as synthetic label but includes variable discount coupon when returned
Tire Rotation
Return Mileage: 3000
within 500 miles of return service mileage (does not include optional customer
Return Date: 11/04/07
Receive $3.00 Off!
message)
Discount When Return Within
500 Miles of Mileage Above 5) Tire Rotation
Oil Shop - Automatically adds 6,000 miles and 3 months for return service, includes
12345 E Oil St

Your Next Service is Due:
Oilville, CA 12345
(800) 555-5555
optional customer message
Mileage: 75000 6) Custom Label
Date: 12/12/08
Service: TUNE UP - Customize your own service (ie: Tune Up, Engine Service, etc.), return mileage
Thank You For Your Business
Happy Holidays!!! and date and your very own greeting

Calibrating Static Cling Sticker with Printer:
1. Turn printer OFF (located in back of printer)

2. Press and Hold on to the PAUSE button of printer (as shown in picture
on the left)

3. While still holding the PAUSE button, turn the printer ON

4. Release PAUSE button as soon as printer starts feeding labels

5. Press the FEED button once

Your system should now be calibrated with your Striker Reminder Label
System.

NEED TO REORDER PRINT RIBBONS AND LABELS? CALL 800-262-7298 AND ORDER TODAY
NEED TO REORDER PRINT RIBBONS AND LABELS? CALL 800-262-7298 AND ORDER TODAY