Different Methods Used in Carpet Cleaning Services_63647

Document Sample
Different Methods Used in Carpet Cleaning Services_63647 Powered By Docstoc
					?One mark of a serious company is that it keeps its premises clean and tidy. Clean
offices give a company an atmosphere of professionalism and competency. It is
important that the facilities are managed well: all the furniture should be utilized and
space optimized. It is also a major responsibility to make sure that the carpets are
always clean and presentable. But leaving the task of carpet cleaning to the regular
maintenance guys alone will not be enough. Removing dark stains and deep-seated
dirt requires the skills of those who are really specializing on carpet cleaning services.

Getting a pristine carpet can be achieved by different means. Below is a list of the
techniques currently being used today:

Foam Cleaning. This type of carpet cleaning initially uses a particular type of floor
buffer machine that releases shampoo onto a brush that works its way into the carpet's
threads. When the carpet has dried - in about one to two hours - the area is then
vacuumed to remove remaining dirt. This type of carpet cleaning is easier than the
others and is more commonly used for frequently used areas.

Dry Compound Cleaning. This procedure is done by depositing an absorbent,
biodegradable cleaning compound into the carpet, brushed or scrubbed and then
vacuumed off. A good aspect of this process is that it leaves the carpet immediately
clean and dry.

Bonnet Cleaning. Club soda is mixed with cleaning product and then thinly applied
onto the surface. A round buffer or "bonnet" then scrubs the mixture and its absorbent
spin pad draws dirt from the carpet. After the procedure, it can be rinsed or replaced
as required.

Encapsulation. This type of carpet cleaning is done by crystallizing dirt particles into
dry residues through the use of polymers (a type of large molecule). The polymers act
like tiny sponges, encapsulating dirt and makes it easier to remove. This process of
carpet cleaning can be done using a rotary machine, brush applicator, or compression

Steam Cleaning. This process is also known as hot water extraction. It starts by
having a detergent-based solution to the carpet. When the solution has properly
soaked in, a pressurized manual is then passed over the carpet several times, until all
residues have been rinsed out. Steam cleaning is one of the most preferred methods in
carpet cleaning services as it removes more dirt and odor and is suitable for valuable

A clean carpet is one of the best sign of meticulous supervision, and an office with a
dusty and stained carpet will give a bad impression to its clients. You should always
entrust your carpet to the best carpet cleaning services who knows the different ways
of carpet cleaning.
Nathan Nwachukwu is the CEO of BENNIS SEVICES LTD, a facility specializing in
laundry    and    carpet     cleaning services. For  more       information:

Shared By: