Docstoc

Price list xlsx

Document Sample
Price list xlsx Powered By Docstoc
					Prices (Last updated 14th December 2010)
                                                                                                               UK Carriage, 
Product 
Product
                                                 Description                                         Price      Packing, & 
 Code
                                                                                                                Insurance
                                                    LATHE
 1019
       Micro Lathe in kit form with choice of 3 or 4‐jaw chuck (Tailstock not included)              £170.00        £10.00
  1015 Micro lathe with power feed                                                                   £270.00        £12.00
 1015R Power feed Retro Fit kit                                                                      £126.00         £8.00
 1020
           Micro Lathe, assembled, with choice of 3 or 4‐jaw chuck (Tailstock not included)          £185.00        £10.00
 1025
           Three jaw self centering chuck, steel body, with reversible soft aluminium jaws            £45.00          £6.00
 1027      Additional blank soft jaws for #1025                                                        £8.00          £3.00
 1030      Four jaw chuck, with reversible, heat‐treated steel jaws                                   £45.00          £6.00
 1034      Lathe dog, holds workpiece when turning between centres                                    £24.00          £4.00
 1035      Face plate                                                                                 £16.00          £4.00
 1036      Face plate angle bracket set
           Face plate angle bracket set                                                                £8.00          £4.00
           Collet set, collet closer with 8 collets sized 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 
 1040
           and one blank                                                                              £23.00          £4.00
 1041      3/16" collet and closer for use with milling cutters                                        £7.00          £3.00
 1042      Four blank collets, unslotted (may be bored & slotted for special purposes)                 £4.00          £2.00
 1091      0‐1/4" Jacobs chuck                                                                         £8.00          £4.00
 1092      1/16"‐3/8" Jacobs chuck                                                                     £9.00          £4.00
 1093      5/64"‐1/2" Jacobs chuck                                                                    £10.00          £4.00
 1120      Grinding wheel arbour screws directly onto spindle
           Grinding wheel arbour ‐ screws directly onto spindle                                        £8 00
                                                                                                       £8.00          £4.00
                                                                                                                      £4 00
 1122      Grinding wheel set                                                                          £9.00          £4.00
 1150      Drilling tailstock ‐ lever operated                                                        £32.00          £5.00
 1151      Needle bearing centre ‐ spring loaded                                                      £14.00          £4.00
 1160      Spare belt                                                                                 £10.00          £2.00
 1161      6 step pulley set (2 pulleys) including Vee belt for 11mm motor shaft                      £24.00          £4.00
 1162      6 step pulley set (2 pulleys) including Vee belt for 1/2" motor shaft                      £24.00          £4.00
           6 piece tool bit set ‐ HSS, left & right, round nose, boring bar, cutoff, 45 degree 
 1095
            h f
           chamfer                                                                                    £24 00
                                                                                                      £24.00          £3.00
                                                                                                                      £3 00
           Compound top slide ‐ mounts on cross‐slide for cutting angles and tapers ‐ with 
 1200
           toolpost                                                                                   £45.00          £6.00
 1220      Milling attachment (vertical slide) ‐ mounts on cross slide, 2" X 3.75" table              £58.00          £6.00
 1230
           Milling cutter ‐ 2 flute double ended slot drill ‐ 1/16" diameter, with 3/16" shank         £8.00          £1.00
 1231
           Milling cutter ‐ 2 flute double ended slot drill ‐ 3/32" diameter, with 3/16" shank         £8.00          £1.00
 1232
           Milling cutter ‐ 2 flute double ended slot drill ‐ 1/8" diameter, with 3/16" shank          £8.00          £1.00
 1233
           Milling cutter ‐ 2 flute double ended slot drill ‐ 5/32" diameter, with 3/16" shank         £8.00          £1.00
 1234
           Milling cutter ‐ 2 flute double ended slot drill ‐ 3/16" diameter, with 3/16" shank         £8.00         £1.00
 1235      Fly cutter, 1.25" to 2.25" diameter, fits headstock, tool bit included                     £24.00         £4.00
 1000                                  g         y            g   g
           Lathe and motor mounting assembly ‐ including hinged motor plate   p                       £22.00         £7.00
 1002      New GEC 1/4 HP electric motor ‐ 11mm shaft                                                 £50.00        £10.00
 1250      Riser block kit for headstock and toolpost (provides 6" swing)                             £21.00         £4.00
 1251      Tailstock riser block                                                                      £18.00         £4.00
 1140      Drill chuck arbour ‐ attaches Jacobs chucks to headstock spindle                            £9.00         £4.00
 1190      Steady rest ‐ fits to bed to support long shafts etc. 3/32" to 1.5" diameter               £22.00         £4.00
  1180   HSS Slitting saw ‐ 2.5" diameter X 0.32" thick                                        £8.00      £3.00
  1181   Slitting saw arbour                                                                   £7.00      £4.00
  1182   Tailstock die holder for 13/16" and 1" diameter button dies                          £20.00      £4.00
  1170   Extra toolpost (as supplied with the lathe)                                           £8.00      £3.00
  1171
         Back toolpost, tool bit mounts upside down, 2 tools may be used at the same time      £8.00      £3.00
  1173   T‐bar cutoff tool, height adjustable                                                 £24.00      £4.00
                       ,             (                          p      , y
         Blank arbour, 1" diameter (screws onto headstock spindle, may be machined for 
  1132
         special jobs)                                                                         £8.00      £4.00
  1210   Radius turner, swings toolbit in an arc for ball turning etc.                        £22.00      £4.00
  1221
         3/4" X 16 TPI chuck adapter, adapts chuck to cross slide or milling machine table     £9.00      £4.00
  1225   Milling vice, 1.25" opening, 2" wide                                                 £24.00      £3.00
  1252   Laser cut headstock spanner, 1" AF, 1/8" thick, facilitates chuck removal             £5.00      £3.00
1045ER   ER16 adapter to use ER16 collets in the standard lathe spindle                       £24.00      £4.00
W1020A   WW headstock inc. drawbar (Use your own WW collets)
         WW headstock inc drawbar (Use your own WW collets)                                   £72 00
                                                                                              £72.00      £6.00
                                                                                                          £6 00
 1020B   Replacement lathe headstock                                                          £56.00      £6.00

                                      WOODTURNING TOOLS
  2001   4‐jaw woodturning self‐centering chuck                                               £48.00      £6.00
  2004   Woodturning face plate                                                                £8.00      £3.00
  2005   ASHLEY ISLES miniature woodturning tools (set of 4)                                  £32.00      £4.00
  2006   Woodturning toolrest, 4" swivel joint, adjustable height                             £24.00      £4.00

                                                 BOOKS
         The Taig Lathe and its accessories by Tony Jeffree, ISBN Number 0‐9543493‐0‐X. 
  2007
         (The Taig Lathe is sold in the UK as the Peatol Precision Lathe.)                    £15.00      £2.00

                                          Micro Mill
  2100 Micro mill ‐ complete, manual operation, with ER16 spindle                            £930.00     £18.00
       Set of 3 NEMA 23 stepper motor mounts and couplers (for converting the mill to 
  2101
       CNC)                                                                                  £150 00
                                                                                             £150.00      £5.00
                                                                                                          £5 00
 2100H Replacement ER16 headstock                                                             £84.00      £6.00

Items 1019 and 1020 may be ordered with a four jaw self centering woodturning chuck (#2001)
as an alternative to the three or four jaw metalworking chuck.
UK customers ordering a lathe with accessories need only remit £18.00 for carriage, etc.
UK customers ordering a mill with accessories need only remit £18.00 for carriage, etc.
UK customers ordering accessories only, if the carriage charge exceeds £9.00, need only remit £9.00
Overseas customers please contact us for an accurate quotation for the cost of carriage and insurance.
All major credit cards accepted - same day dispatch for credit card orders

SEND ALL ORDERS OR ENQUIRIES DIRECTLY TO PEATOL USING THE CONTACT INFORMATION
BELOW, PLEASE - ORDERS CANNOT AND WILL NOT BE ACCEPTED VIA EMAIL.

                                    Peatol Machine Tools
              19 Knightlow Road, Harborne, Birmingham, B17 8PS, England
              Tel/Fax: 0121-429-1015 (+44-121-429-1015 from outside the UK)
                             Website: http://www.peatol.co.uk
                             Email: pmorrison815@btinternet.com

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:41
posted:4/5/2011
language:English
pages:2