2651022223_Yamaha_FX-SHO

Document Sample
2651022223_Yamaha_FX-SHO Powered By Docstoc
					HOT PRODUCTS 2008 CATALOG SUPPLEMENT • YAMAHA FX SHO & FX CRUISER SHO
                                                                          Hot Products is proud to release this 2008
                                                                          Catalog Supplement featuring all of the newest
                                                                          aftermarket parts and kits for the Yamaha’s
                                                                                   Waverunner FX SHO, FX Cruiser SHO,
                                                                                                2009 FZR and 2009 FZS.




        WAVERUNNER YAMAHA FX SHO                                          WAVERUNNER YAMAHA FX CRUISER SHO




FX SHO Color s: Stealth Black and Metallic Midnight Blue                  Bore x Str oke: 86x78mm Displacement: 1812cc
FX Cruiser Color s: Crimson Red Metallic and Bronze Metallic              Hor sepo wer: N/A
Dimensions & Capacity:                                                    Compression Ratio: 8.6:1
Claimed Dr y Weight: 827lb (376 kg)                                       Intake System: Centrifugal supercharged
Length: 131.5” Width: 48.4” Height: 48.8”                                 Fuel-Induction System: Electronic fuel injection
Seat Length: 66”                                                          Exhaust System: Water-jacketed
Max Rider Capacity: 3                                                     Cooing System: Open-loop, water-cooled
Weight Capacity: 529lb                                                    Drive System:
Hull Components:                                                          Jet Pump: Axial-flow, single-stage
Hull Type: Progressive-stepped V-hull                                     Jet Pump Diameter: 155mm
Hull Material: Compression-molded nanofiber composite                     Impeller: 3-blade, stainless-steel (17 degree pitch)
Dec k Material: Compression-molded nanofiber composite                    Transmission: Direct drive from engine
Sponsons: (Standard)                                                      Trim System: (Standard) manual 5-position
Steering Enhancement: Reverse traction control                            Electrical:
Steering System: Adjustable 5-position tilt steering                      Batter y: 12-volt, 19-amp
Bilg e System: Electric bilge pump/automatic siphon                       Ignition: Transistor-Controlled Ignition (TCI)
Stora g e: (Standard) bow tub and glove compartment                       Star ting System: Electric
Stora g e Capacity: 26.4 gal                                              Security System: Remote-controlled
Cooler: N/A Cooler Capacity: N/A                                          Spark Plug: NGK LFR6A
Boar ding Lad der: (Standard) retractable                                 Instrumentation:
Boar ding Handle: (Standard)                                              Fuel Gaug e: (Standard), fuel consumption per gallon and per hour
Passeng er Grab Handle: (Standard) integrated into rear-boarding handle   Oil Gaug e: (Standard), LCD oil-pressure and low-level warnings
Seat Strap: No                                                            Speedometer: (Standard) Tac hometer: (Standard) Hour Meter: (Standard)
Lan yar d: (Standard) wristband                                           Trim Gaug e: (Standard) mechanical indicator on left grip
Thr ottle Le ver: Finger-type integrated cruise-assist and no-wake mode   Fuel/Lubrication:
Mirr or s: (Standard) convex                                              Recommended Fuel: Regular unleaded gasoline (87-octane minimum)
Traction P ads: (Standard) full-length plus foot chocks                   Fuel Capacity: 18.5 gal
Engine:                                                                   Lubrication System: Dry-sump
Engine Type: Supercharged Yamaha Marine SHO, 4-stroke, 4-cylinder         Engine-Oil Reser voir: N/A
                       FX SHO & FX CRUISER SHO • INTAKE - SUPERCHARGER


                                                                                                                                               OEM

                                                                                  FOR INTAKE
                                                                                  MANIFOLD
                                                                                                                                               R&D

                                                                                    FOR INTERCOOLER


            RIVA PERFORMANCE YAMAHA                                                      R&D SHO POWER CORE INTAKE
          FX-SHO/FZR/FZS POWER FILTER KIT                                               MANIFOLD/INTERCOOLER CFM KIT
Our Power Filter feeds your SHO or FZR a steady diet of cool air             The R&D FX-SHO/FZR/FZS Power Intake Manifold and Intercooler CFM
delivering greatly improved acceleration and rpm. Replaces restrictive       Kit was developed to increase airflow into and through the intake system
stock air box with a high-volume, precision-formed intake duct that          by relieving restrictions. The R&D FX-SHO/FZR/FZS intake manifold rib-
attaches to the supercharger via a large 4” adapter. Cool air enters         bon remover sleeve will unlock a 40 CFM (cubic feet per minute) air flow
the system via an oversized K&N filter element. Includes water-repel-        restriction by replacing the intake manifold ribbon with the R&D billet
lent pre-filter.                                                             venturi sleeve. The R&D Intercooler Spacer will unlock a 30-35 CFM
                                                                             restriction in the intercooler. The R&D FX-SHO/FZR/FZS Intake Kit will
Description                                                      Part No.    add low end and mid range throttle response, and a full 100 plus rpms to
Riva FX-SHO/FZR/FZS Performance Power Filter Kit               RY13040       top end performance to a stock FX-SHO/FZR/FZS. The R&D FX-
                                                                             SHO/FZR/FZS Intake Kit is an absolute must have parts kit to remove
                               R&D PERFORMANCE POWER                         intake restrictions before contemplating power adding compressor boost-
                                                                             er wheels or turbo charger kits to the FX-SHO/FZR/FZS engine. True
                                 PLENUM AIR FILTER KIT                       horsepower gains on the FX-SHO/FZR/FZS start right here with the
                                 The R&D High Performance Power              R&D Intake Kit. More airflow will equal more power, and there is no other
                                 Plenum Air Filter Kit was designed,         way around the fact that restricted is restricted power.
                                 developed and dyno tested exclusively
                                 for the new Yamaha SHO/FZR super-           Description                                                     Part No.
                                 charged intake system to unleash low-       R&D FX-SHO/FZR/FZS Power Core Intake                         612-18000
                                 end, mid-range, and peak horsepower         Manifold/Intercooler CFM Kit
                                 trapped in the restrictive stock air box.
                                 The exclusive lightweight filter design
                             couples to the OEM supercharger hose
                                                                                                                   RIVA FX-SHO/FZR/FZS
                             and is engineered with a large 6”x10”x6”                                               INTAKE MANIFOLD
                             plenum to deliver massive cubic air volume
                             and improved air speed to the supercharg-                                                 UPGRADE KIT
                             er. Replacing the O.E.M. air box with the                                           Upgrade your engine to produce
                             R&D Filter kit offers an economical way to                                          more horsepower through increased
                             improve performance, looks, and sound at                                            boost pressure (+1lb). Supplied hole
a fraction of the cost of other aftermarket kits. Kit comes complete                                             cutting tool allows easy removal of
with all necessary hardware and installs in minutes.                                                             restrictive screen element from
                                                                             inside of intake manifold. Special o-ringed, billet block-off plug with
Description                                                      Part No.    integrated fitting for aftermarket boost pressure gauge fills opening left
R&D FX-SHO/FZR/FZS Perf. Power Plenum Air Filter Kit          200-01801      after removal of screen element. Includes detailed installation instruc-
                                                                             tions. NOTE: Testing has determined the stock ECU will compensate
                                                                             for the increased boost provided by our Intake Manifold Upgrade Kit.
                            R&D FX-SHO/FZR/FZS POWER
                                                                             Description                                                     Part No.
                             PLENUM FLAME ARRESTER                           Riva FX-SHO/FZR/FZS Intake Manifold Upgrade Kit         RY12040-IMUK
                                FOR STOCK AIR BOX
                               The R&D High Flow Filter design replaces
the restrictive stock filter inside the stock air box, allowing improved
air flow. Why? Because more air flow means more power and
improved performance. The washable and reusable design means
this will be the last filter you will ever have to buy.

Description                                                      Part No.
R&D FX-SHO/FZR/FZS Power Plenum Flame Arrester                200-01800

2
        FX SHO & FX CRUISER SHO • INTAKE - SUPERCHARGER - INTERCOOLER
                                    R&D FX-SHO/FZR/FZS C1
                                   MONSTER CHARGER WHEEL
                                R&D’s C1 Monster Compressor Wheel
                                Kit for FX-SHO/FZR/FZS engines will
                                deliver “horsepower you can feel” with
                                instant throttle response, improved mid
                                range acceleration, and increased top                                                               RIVA PRO-SERIES
                                end performance. The R&D Monster
                                Wheel replaces the stock wheels ineffi-                                                             SUPERCHARGER
cient 5 blade design with a modern low profile, high flow 7 blade                                                                      IMPELLER
w/splitter design. The R&D Monster Wheel will deliver 2.5 pounds of                                                               Presenting the ultimate
boost pressure with a 1.5-2.0 pound per minute airflow gain. The R&D                                                              (drop-in) performance
C1 Monster Wheel fits directly into the O.E.M. stock compressor hous-                                                             supercharger impeller for
ing for a “no modifications” bolt on and go part. The C1 Monster works                                                            the Yamaha 1.8 liter
with the O.E.M. intercooler and the R&D Intake CFM Kit (pt# 612-                                                                  Supercharged Engine!
18000), and performs well on 91 octane pump gasoline. Boost rated                                                                 Working closely with
6/8 P.S.I. (6 @ 7400 and 8@7600)                                                                                                  Vortech Engineers, we
      • Better throttle response, increased horsepower                                                                            developed a high-perform-
      • Increased boost pressure ( 2.5-3 over stock @ 7600 rpm)                                                                   ance replacement impeller
      • Increased airflow (1.5-2 pound per minute gain)                               that delivers 14 lbs of boost @ 8,000rpm in RIVA Stage II applica-
      • 15 Plus horsepower increase and 2 MPH Gain                                    tions. Produces more horsepower and torque throughout the RPM
      • Precision balanced (turbo specs .012-.027 gram inches)                        range resulting in excellent acceleration & top speed. Investment cast
      • Utilizes O.E.M. intercooler      • 91 octane pump gas friendly                from an extremely strong, lightweight proprietary aluminum and CNC
      • Ultra easy installation          • Inexpensive horsepower upgrade             machined to ensure exact tolerances. All new blade design is opti-
NOTE: The R&D C1 Monster Compressor Wheel delivers a 1.5-2.0 pound per
                                                                                      mized aerodynamically and precision balanced to deliver smooth
minute airflow gain (approximately 15-20 horsepower at sea level). The C1
Monster Wheel will work best in sea level to 2000 ft. elevations, or in ambient air   operation. Installs easily into stock supercharger housing with no addi-
temperatures between 60 and 100 degrees. For high altitude situations (such as        tional modifications required. Includes detailed installation instructions.
Denver, Colo.) or high heat conditions (above 100 degrees), R&D suggests mov-         NOTE: This impeller requires use of RIVA Pro-Series ECU & Injector
ing up to the C2-C4 range of Monster Wheels and upgrading to the R&D High             Kit for proper engine management calibration and premium 91+
Performance Intercooler Core Kit. Air density is greatly influenced by heat and       octane fuel is required.
altitude combinations. In conditions where the air becomes less dense, power
will be lost. R&D offers a range of compressor wheels that will allow the engine
tuner to compensate for air density losses with a range of compressor wheels
                                                                                      Description                                                      Part No.
with increased blade tip height and increased inducer sizes, all with increased       Riva FX-SHO/FZR/FZS Pro-Series S/C Impeller              RY17040-SCI-1
air flow volumes rated in pounds per minute. Trust the pros at R&D to boost up
your airflow volume, after all, its airflow volume gains that increase horsepower.

All R&D Monster Compressor Wheels are precision mass center bal-
anced in the preliminary casting/machining operations process, and
precision two plane balanced after the final machining processes. The
balance tolerances on the R&D Monster Wheels are held to a much                                                                              R&D FX-
stricter and tighter tolerance over O.E.M. or aftermarket wheels. Your                                                                     SHO/FZR/FZS
R&D compressor wheel may have small balancing grooves machined
in the blade channels of the wheel in some areas. This procedure is                                                                          SILICONE
part of the mass center balancing process. The small grooves do not
in any way impede or hinder the compressor wheels ability to efficient-
                                                                                                                                           INTAKE HOSE
ly pump or compress air. The R&D precision two plane balanced com-                                                                              KIT
pressor wheels will perform perfectly and smoothly at 180,000-200,000                                                                    The R&D Yamaha
rpm’s as the wheels have been blueprinted and balanced to stringent                                                                      FX-SHO/FZR/FZS
turbocharger specifications, even though the wheel will only spin at a                                                                   Supercharger High
fraction of those rpm’s. R&D has gone the extra mile in the balancing                                                                    Performance Hose
process of the Monster Wheels as higher balancing standards will add                  Kit was developed while testing the R&D Monster Compressor Wheel
significantly to the service life and performance of the supercharger                 Kits. Higher boost pressures create higher intake air temperatures of
system. Precision balancing will significantly increase bearing life, pro-            up to 235 degrees. The O.E.M. standard black rubber hose and stan-
mote better clutch performance, extend clutch life through decreased                  dard hose clamps just do not hold up to the pressures and heat like
clutch slippage, and increase horsepower performance.                                 high quality, high temperature silicone hose and high strength stain-
                                                                                      less steel T-bolt style hose clamps. The R&D “Blue Hose” is manufac-
The C1 Wheel Kit works excellent for recreational use applications                    tured from high performance, turbo charger quality high-temperature
retaining the OEM ignition, fuel system, injectors, and intercooler. R&D              silicone. The R&D silicone hose installs easily in place of the OEM
has data logged and documented the A.F.R. to be a conservative and                    rubber elbow hose, and T-bolt clamps will keep the hose secure for
safe 11.8-12.0 with the C1 wheel kit. R&D recommends that the R&D                     the longest of endurance races.
Power Core Intake Manifold and intercooler CFM kit or the R&D Stage
1 Intercooler Kit (612-18001, page 4) be used with the C1 wheel.                      Description                                                      Part No.
                                                                                      R&D FX-SHO/FZR/FZS Silicone Intake Hose Kit                   612-18007
Description                                                             Part No.
R&D FX-SHO/FZR/FZS C1 Monster Charger Wheel                          612-25001
                                                                                                                                                               3
       FX SHO & FX CRUISER SHO • INTAKE - SUPERCHARGER - INTERCOOLER
                          R&D FX-SHO/FZR/FZS STAGE 1
                            INTERCOOLER CORE KIT
                         The R&D Yamaha FX SHO/FZR Stage 1
                         Intercooler Core Kit was developed to replace
                         the over restrictive OEM intercooler with an
                         inexpensive direct replacement core that will                                             R&D FX-SHO/FZR/FZS
                         bolt in to the OEM stock location with all stock
                         hardware. The R&D Intercooler Core reduces                                               SURGE PROTECTOR KIT
                         the deadhead air restriction (similar to the                                             The R&D Yamaha FX-
                         R&D Intake Core Kit) that is created when                                                SHO/FZR/FZS Surge Protector Kit
                         installing a C1 Monster compressor wheel                                                 will significantly improve super-
                         with a 3-4 pound boost pressure gain. The                                                charger clutch and compressor
R&D Intercooler offers better cooling efficiency with an aluminum 8                                               wheel performance and reliability
core design over the stock cooper 6 core design. The R&D core will                                                by eliminating damaging compres-
flow more air, offer better cooling efficiency, and allow the C1                                                  sor surge. The R&D Yamaha FX-
Monster Wheel to live up to its airflow volume potential.                                                         SHO/FZR/FZS Surge Protection
     •   Flows 40 CFM more than stock                                       Kit utilizes an automotive vacuum assisted Bosch pressure blow off
     •   3 pounds lighter than stock                                        valve that releases the unwanted intake pressure between the throttle
     •   Improves cooling efficiency                                        valve and the supercharger thus keeping the pressures in P1 and P2
     •   Bolts directly into stock location                                 equal. As soon as the throttle valve is opened, the blow off valve
     •   Increases horsepower by reducing restrictions                      immediately closes and the compressor can supply its full boost
     •   Works great with C1 compressor wheels                              potentials to the engine. The R&D surge hose is manufactured from
     •   Retains O.E.M. flushing system for maintenance                     high performance, high-temperature silicone with an integrated mold-
                                                                            ed riser for the blow off valve to function without hindering intake flow
Description                                                     Part No.    or velocity. The R&D kit installs easily in place of the OEM rubber
R&D FX-SHO/FZR/FZS Stage 1 Intercooler Core Kit              612-18001      elbow joint with no modifications. The R&D Pressure Port installs
                                                                            between the MAP sensor and the MAP sensor bracket with a “bolt on”
                                                                            part. The R&D Surge Protection Kit is a necessary and cost effective
                                         R&D FX-SHO/FZR/FZS                 upgrade for the Yamaha SHO supercharged engine. The R&D kit
                                              300+ HP                       comes completely assembled with silicone elbow, blow off valve, R&D
                                                                            B.O.V. filter, mounting hardware and instructions.
                                          INTERCOOLER KIT
                                     The new R&D Intercooler                Description                                                     Part No.
                                     System will efficiently                R&D Surge Protector Kit                                      612-18008
                                     decrease superheated
                                     air temperatures
                                     produced by high perform-                                                 R&D FX-SHO/FZR/FZS
ance Superchargers. Designed for 300+ horsepower applications.                                               BILLET SURGE PROTECTOR
Description                                                     Part No.                                        VALVE & FILTER KIT
R&D FX-SHO/FZR/FZS Stage 1 Intercooler Core Kit              612-18002                                       The R&D Billet Surge Protector Valve
                                                                                                             and Filter Kit is now available. The bil-
                                                                                                             let aluminum CNC machined valve is
                                   RIVA FX-SHO/FZR/FZS                                                       an optional bolt-on replacement for
                                                                                                             the plastic Bosch valve used in the
                                      POWER COOLER                          R&D and other aftermarket surge protection systems. The o-ring
                              The RIVA Power Cooler intercooler             sealed billet design offers improved consistency and performance in
                              system features a huge Vortech cooler         higher boost pressure applications.
                              element for maximum efficiency. Delivers
                              an increase of 15 peak horsepower             Description                                                      Part No.
                              over original intercooler providing arm-      R&D Billet Surge Protector Valve & Filter Kit                 613-95260
                              wrenching results on the water. The
                              RIVA Power Cooler features a large,           A.
                              unrestricted core that exhibits minimal
                                                                                                                     SPECIALTY
pressure loss. The cooling element is dramatically more efficient than                                          SUPERCHARGER TOOLS
the stock unit with exit temperatures averaging 50°F cooler than                                              R&D has designed a custom tool
stock. This delivers cooler, denser air for increased performance                                             kit that is essential in the rebuilding
throughout the RPM range. Innovative design allows easy disassem-                                             process of the Yamaha
bly of cooler element & ducting for maintenance and cleaning.                    B.                           Supercharger. All tools are specific
Installs securely with shock absorbing rubber mounting system and                                             in application and are cnc machined
stainless steel hardware. Power Cooler Kit contains all necessary                                            to ensure a precision job.
hardware and detailed installation instructions.
Description                                                   Part No.      Description                                                      Part No.
Riva FX-SHO/FZR/FZS Power Cooler                          RY17040-PC        A. Supercharger Housing Holder Bracket Tool                   612-92010
                                                                            B. Shaft/Gear Holding Tool                                    612-92011
4
      FX SHO & FX CRUISER SHO • SUPERCHARGER - INTERCOOLER - EXHAUST
                                                                                                                     R&D FX-SHO/FZR/FZS
                                                                                                                         O2 SENSOR
                                                                                                                         MOUNT KIT
                                                                                                                   The new R&D O2 sensor mount
                                                                                                                   kit makes installing an AFR gauge
                                           R&D FX-SHO/FZR/FZS                                                      a breeze on the Yamaha FX-
                                              INTERCOOLER                                                          SHO, FZR, FZS, FX140, HO,
                                                                                                                   GPR, and VX110. It simply
                                               COOLING KIT                                                         replaces the OEM plug and
                                           The R&D Yamaha FX-                  installs directly into the OEM pipe without any modifications. Kit
                                           SHO/FZR/FZS Intercooler             comes complete with installation tool. AFR gauge sold separately.
                                           Temperature Control system
                                                                               Description                                                   Part No.
                                           was developed to offer an           FX-SHO/FZR/FZS/FX140/HO/GPR/VX110                           332-18010
                                           inexpensive complete bolt on        O2 Sensor Mount Kit
                                           kit that will allow the full per-
                                           formance and cooling poten-
                                           tial the O.E.M. intercooler has                                             R&D FX-SHO/FZR/FZS
to offer for recreational applications. Intercooler core water tempera-
tures have a range of affect on the supercharged air temperatures                                                      HIGH FLOW EXHAUST
that enter into the engine. The Yamaha SHO Intercooler operates on
a single low pressure (10 P.S.I.) line of lake temperature water to
                                                                                                                               KIT
                                                                                                                    The R&D SHO High Flow
cool the intercooler. R&D has found that by adding an additional
                                                                                                                    Exhaust Kit will add a notice-
intercooler water in line, and adding an additional water out line and
                                                                                                                    able low end and mid range
bypass fitting, there will be double the water flow volume at 20 P.S.I.
                                                                                                                    power feel as well as add top
Reduced intercooler core temperatures can add a noticeable
                                                                                                                    end performance! The R&D
increase in low end and midrange power along with reduced detona-
                                                                                                                    High Flow Exhaust Kit will add
tion. R&D offers a range of machined flow control fittings to allow
                                                                                                                    a great performance sound to
water volume control tuning for intercooler temperature adjustments
                                                                               the SHO while maintaining a safe and under IJSBA and Coast
for warm lake water and extreme hot air conditions. R&D also offers
                                                                               Guard approved 86 db!
a pressure relief blowoff valve kit for high water volume flow rates on
higher boost Stage 1 and up engine kits. The R&D Kit will allow tem-           Description                                                    Part No.
perature tuning that will deliver surprising results. Unlock hidden per-       FX-SHO/FZR/FZS High Flow Exhaust Kit                        332-18000
formance and power potential in the OEM stock intercooler or after-
market intercooler system by reducing intercooler core temperatures.
       • More horsepower with cooler intake air temperatures
       • Increased acceleration and mid range performance
       • Reduces detonation in hot weather conditions
       • Temperature control tuneability
       • An inexpensive recreational performance addition
       • Pressure relief valve options
       • Easy installation instruction
Description                                                        Part No.
R&D FX-SHO/FZR/FZS Intercooler Cooling Kit                      660-18000


                                         R&D FX-SHO/FZR/FZS
                                            INTERCOOLER
                                           TEMPERATURE
                                         CONTROL PRESSURE
                                          RELIEF VALVE KIT
                                     R&D also offers a pressure relief
                                     blowoff valve kit for high water
                                                                                   RIVA FX SHO/FZR FREE FLOW EXHAUST KIT
                                     volume flow rates on higher boost         Replaces the restrictive sound suppression system located between
                                     Stage 1 and up engine kits. The           the water box and hull exit on your watercraft. Improves engine per-
                                     R&D kit will allow temperature            formance by reducing back pressure and harmful detonation. Includes
                                     tuning that will deliver surprising       mandrel bent aluminum tubing that is powder coated to prevent corro-
results. Unlock hidden performance and power potential in the OEM              sion, high-temp silicone replacement coupler and installation instruc-
stock intercooler or aftermarket intercooler system by reducing inter-         tions.
cooler core temperatures.                                                      Description                                                   Part No.
                                                                               Riva FX-SHO/FZR/FZS Free Flow Exhaust Kit                    RY16040
Description                                           Part No.
R&D FX-SHO/FZR/FZS Intercooler Temperature Control 660-82511
Pressure Relief Valve Kit                                                                                                                           5
                                          FX SHO & FX CRUISER SHO • FUEL
                                                R&D FX-                                                            R&D FX-SHO/FZR/FZS
                                              SHO/FZR/FZS                                                          HIGH PERFORMANCE
                                             FUEL PRESSURE                                                          FUEL INJECTOR KIT
                                             REGULATOR KIT                                                          When boosting the horsepower
                                                                                                                    on the FX-SHO/FZR/FZS four
                                            R&D offers a Yamaha FX-
                                                                                                                    stroke fuel injected engine,
                                            SHO/FZR/FZS model specific
                                                                            whether using high compression pistons, cams, or higher ratio super-
                                            fuel pressure regulator sys-
                                                                            charger compressor wheels, it will be necessary to increase the fuel
tem allowing custom fuel pressure tuning to the EFI fuel systems fuel
                                                                            flow delivery. The OEM Yamaha SHO injectors have been precision
pressures. The R&D Fuel Pressure Regulator System offers a wide
                                                                            flow rate tested to be 80 percent peaked on stock units at sea level
range of setup possibilities. Base fuel pressure is adjustable from 5 to
                                                                            without modifications. R&D offers high performance fuel injectors
60 PSI. The R&D fuel pressure regulator can also be set up to allow
                                                                            with a higher atomization spray pattern that are easily capable of
“rising rate” fuel pressure at a 1 to 1 ratio (One pound of fuel pres-
                                                                            delivering fuel flow specifications to accommodate up to 400 horse-
sure gain over base for every pound of boost gain). R&D offers two
                                                                            power!
types of fuel pressure regulator set ups. Part #802-00080 will come
                                                                            R&D has flow rate tested the O.E.M. Yamaha SHO injectors and veri-
completely assembled and ready to install. The R&D Pro System is
                                                                            fied them to flow 396 cc at 43 PSI of fuel pressure, which rates them
100 percent complete, installs directly to the top of the fuel tank, and
                                                                            to flow 30 pounds of fuel per hour. The R&D High Performance Fuel
connects directly to the fuel rail with OEM security lock connectors
                                                                            Injectors have precision flow rate tested to 525 cc at 43 PSI of fuel
with no modifications. For the R&D Fuel Pressure Regulator only use
                                                                            pressure, and 625 cc at 70 PSI of fuel pressure, which rates them to
part #801-25010, which comes complete with 90 degree barbed
                                                                            flow as much as 62 pounds of fuel per hour. R&D High Performance
brass fittings for use with push on type hose and Oetiker style clamps
                                                                            Injectors have been flow rate tested to perform excellent, delivering
for security. R&D offers high performance fuel hose that can be pur-
                                                                            precise fuel at fuel pressure ratings ranging from 40 to 80 PSI. Each
chased by the foot, as well as the Oetiker style clamps. The R&D
                                                                            R&D High Performance Fuel Injector Kit will come packaged with
bypass style regulator system is capable of handling any fuel pump
                                                                            vital flow test rating information that will be broken down specifically
up to 250 GPH. Replace “Deadhead” regulator performance and
                                                                            in five pound increments in fuel pressure to give the fuel flow delivery
experience the full flow volume and rock steady fuel pressure that
                                                                            information that will help in tuning fuel pressure to match the engines
only a dynamic R&D fuel pressure regulator kit can produce.
                                                                            fuel flow needs based on horsepower gains over stock. R&D offers
•     Fuel pressure will rise on a 1:1 ratio when boost referenced
                                                                            only the highest quality fuel injectors, fuel pressure regulators, and
•     All ports are 3/8” NPT, with one inlet, 3 outlets, and one return
                                                                            fuel management accessories, for all your engine management
      port on the bottom
                                                                            needs.
•     Beautiful type II bright dip anodized finish
•     Bypass design produces the ultimate, dynamic fuel delivery            Description                                                    Part No.
      system                                                                R&D FX-SHO/FZR/FZS High Perf. Fuel Injector Kit             812-18000
•     3/8 pipe tapped for standard or AN fitting ready
•     R&D offers pre-assembled #4 AN hose to finish off a return
      system
                                                                                                                        RIVA FX SHO/FZR
•     R&D offers fuel hose by the foot for custom routing                                                               PRO-SERIES FUEL
Description                                                     Part No.                                                 INJECTOR KIT
R&D FX-SHO/FZR/FZS Fuel Pressure Regulator Kit               802-00080                                                  Riva’s high performance
                                                                                                                        fuel injector kit supplies
                                                                            modified Yamaha 1.8 liter Supercharged engines with additional fuel
                             R&D FX SHO/FZR IN-TANK                         for RIVA Stage II & III applications. These 95lb injectors are designed
                            FUEL PRESSURE REGULATOR                         for use with RIVA Pro-Series ECU (RY11840-01-C, page 7) for cor-
                                                                            rect calibration. Injector sets are flow-matched for optimum idle quali-
                                  BLOCK OFF KIT                             ty and peak performance.
                           R&D offers a Fuel Pressure Regulator Block
                           off Kit which will allow the OEM stock in tank   Description                                                   Part No.
                                                                            Riva FX-SHO/FZR/FZS Pro-Series Fuel Injector Kit        RY12040-I-KIT
fuel pressure regulator to be removed, blocked off, and replaced with
a billet part which is mandatory when installing an aftermarket exter-
nally adjustable fuel pressure regulator system. The OEM in tank fuel                                                R&D #4 & #6 FUEL
pressure regulator is fixed to maintain 40-43 pounds of fuel pressure
at all times. For high performance applications where horsepower is
                                                                                                                      RETURN LINE KIT
boosted, it is necessary to install larger flowing fuel injectors and be                                         R&D has developed a two larger
able to tune the fuel pressure up or down as needed. Most factory                                                fuel return line kits for the FX-
race teams are running 65 plus pounds of fuel pressure along with                                                SHO/FZR/FZS. Increasing the
higher flowing fuel injectors and externally adjustable pressure regu-                                           diameter of the fuel return line
lators. The R&D has a complete line up of fuel pumps, fuel injectors,                                            to #4 or #6, decreases line pres-
fuel pressure regulators, fuel gauge, and fuel hose accessories all                                              sure and increases fuel volume,
designed specifically for the Yamaha SHO. All R&D fuel injection                                                 yielding increased tuning ability
parts and products meet Coast Guard, I.J.S.B.A., and APBA                                                        in high heat and higher perform-
approval.                                                                                                        ance applications.

Description                                                     Part No.    Description                                                   Part No.
R&D FX-SHO/FZR/FZS In-Tank Fuel Pressure                     812-35257      R&D #4 Fuel Return Line                                     612-00082
Regulator Block Off Kit                                                     R&D #6 Fuel Return Line                                     612-00083
                                          FX SHO & FX CRUISER SHO • FUEL



                                      RIVA FX-SHO/FZR/FZS
                                        PRO-SERIES ECU
                                       The Riva Pro-Series Racing ECU                                             R&D FX-SHO/FZR/FZS
                                       delivers a huge performance                                                 MULTI-PRESSURE
                                       advantage to the Yamaha 1.8 liter
Supercharged Engine. ECU is calibrated for Stage II & III applications                                               PORT BOOST
and must be used with RIVA Pro-Series Fuel Injector Kit                                                           GAUGE/SURGE/RRFPS
(RY12040-I-KIT, page 6) and 91+ octane pump fuel. Plugs directly into
factory wiring harness in place of stock ECU. Key benefits include:                                                  ADAPTOR KIT
• Performance Fuel Mapping: Delivers optimal fuel required for                                                   The R&D Yamaha FX-
   your specific level of modification (Stage II or III) based on          SHO/FZR/FZS Multi-Pressure Port Adaptor Kit will allow quick and
   boost pressure.                                                         easy hook up of digital or manual boost gauges with the R&D Multi-
• Performance Timing Curves: Special racing curves produce more            port billet adaptor. The R&D Pressure Port Adaptor installs between
   power throughout the RPM range. Timing is automatically                 the MAP sensor and the MAP sensor bracket as a “bolt on” part with
   adjusted based on sensor input.                                         no modifications. Operate a vacuum/boost gauge, check plenum air
• Rev Limiter Increase: Stock rev limit has been increased from            temperatures, and operate a surge protection valve at the same
   7550 to 8300 RPM. With our recommended pump combination,                time, or run a boost gauge, surge protection device, and operate a
   engine RPM can be run higher producing more boost pressure              boost referenced fuel pressure regulator (RRFPR) at the same time
   and horsepower.                                                         with one simple part. The R&D Pressure Port Adaptor Kit comes
• Retains dash Display, Engine Diagnostic & Primary Engine Safety          complete with longer MAP sensor mounting screws, o-ring seals,
Functions:                                                                 nylon cable ties, all mounting hardware and instruction.
1) All original dash function are retained.
2) Provides diagnostic information that can be displayed via               Description                                                    Part No.
                                                                           R&D FX-SHO/FZR/FZS Multi-Pressure Port Boost                612-92005
   computer interface.
                                                                           Gauge/Surge/RRFPS Adaptor Kit
3) Sensor input is monitored for abnormal readings and will react
   by triggering warnings and/or limp mode.
NOTE: RIVA Pro-Series ECU is for competition use only.                                                             R&D FX-SHO/FZR/FZS
Description                                                   Part No.                                             HIGH PERFORMANCE
Riva FX-SHO/FZR/FZS Pro-Series ECU                      RY11840-01-C
                                                                                                                      HIGH VOLUME
                                        R&D FX-SHO/FZR/FZS                                                           FUEL PUMP KITS
                                                                                                                      R&D Performance carries a
                                           POWERSHOT                                                                  complete line up of high per-
                                           ADJUSTABLE                                                                 formance replacement fuel
                                                                           pumps that are machined specifically to fit the Yamaha FX-
                                           FUEL TUNER                      SHO/FZR/FZS fuel pump housing and are offered in a variety of flow
                                           The R&D Powershot fuel          ratings to facilitate from basic low cost replacement to an all out 500
                                           injection tuner will deliver    H.P. race machine. All R&D FX-SHO/FZR/FZS fuel pumps have been
                                           increased horsepower, accel-    precision flow rate tested and charted in (LPH) liters per hour. R&D
eration, and stronger mid-range performance by delivering a higher         FX-SHO/FZR/FZS fuel pumps arrive complete with Yamaha FX-
performing air to fuel ratio (A.F.R.) to the engine. Many of today’s       SHO/FZR/FZS model specific installation instructions complete with
high performance fuel injected four stroke muscle craft have a lean        detailed photos that will help make the fuel pump installation quick
A.F.R. R&D Performance has tested, documented, and analyzed the            and easy.
O.E.M. fuel maps on every current fuel injected four stroke watercraft,    NOTE: There are no modifications necessary to install the R&D fuel
and pre-programmed and coded the new R&D Powershot fuel injec-             pump therefore switching back to the O.E.M. fuel pump assembly is
tion control module to safely alter the O.E.M. fuel map to a higher        quick and easy as well.
performing and safer A.F.R. (richer). More horsepower, greater accel-
                                                                           Description                                           Part No.
eration and stronger mid-range are the result when the proper A.F.R.
                                                                           R&D FX-SHO/FZR/FZS 190 LPH OEM Repl. Fuel Pump Kit 812-35190
is achieved and is tuned for optimum performance.
                                                                           R&D FX-SHO/FZR/FZS 255 LPH                         812-35255
                                                                           Low Pressure Fuel Pump Kit
The R&D Powershot is fully adjustable on the fly (with the engine
                                                                           R&D FX-SHO/FZR/FZS 255 LPH                         812-35256
running, observed and tuned while riding), and will accommodate a
                                                                           High Pressure Fuel Pump Kit
wide range of adjustability to properly performance tune the A.F.R.
for any combination of aftermarket parts.

*For competition use only!

Description                                                   Part No.
R&D FX-SHO/FZR/FZS Powershot Adjustable Fuel Tuner          802-18000
                                                                                                                                                 7
                               FX SHO & FX CRUISER SHO • RPM KIT - ENGINE


                                                                                                                             KN303




                                                                                                PERFORMANCE GOLD OIL FILTER
                                                                                      •   1-inch nut easy-on/easy wrench-off
                                                                                      •   Drilled safety wire holes for racing
                                                                                      •   Heavy-duty construction
                                                                                      •   Premium filter media provides outstanding filtration
                                                                                          at high-flow rates

                                                                               Description                                  OEM#                     Part No.
                                                                               All Yamaha Four Stroke                  59H-1344-0-00-00                KN303


               RIVA RACING RPM KIT • FX-SHO
                   PART #RY-RPM-FXSHO
             STOCK FX-SHO AVG. SPEED • 65 MPH @ 7,450 RPM
                     RPM KIT • 68 MPH @ 7,500 RPM
                ALL TESTING WAS PERFORMED WITH 1/3 TANK OF FUEL.


 Description                                          Quantity      Part No.
 RIVA   FX-SHO Performance Power Filter Kit               1        RY13040
 RIVA   FX-SHO Free Flow Exhaust Kit                      1        RY16040
 RIVA   Ultra 250X Top-Loader Intake Grate                1        RY22040
 RIVA   Ultra 250X Performance Ride Plate                 1        RY21040
 RIVA   FX-SHO Pro-Series Sponson Kit                     1         RY2625
                                                                                       Adapter Kit Included!
 Additional Performance Upgrades available:
 Description                                          Quantity      Part No.
 RIVA Intake Manifold Upgrade Kit                         1 RY12040-IMUK       MOELLER MARINE PRODUCTS FLUID EXTRACTOR
 *Riva Racing Stage 1 Kit Coming Soon                                          •   Empties oil in 15 pumps or less • Extracts warm or cold oil
                                                                               •   Single-hand-ease effortless operation • Tethered cap
                                                                               •   Pressure relief valve allows easy transportation and storage
                                                                               •   Delivers gulp-free, mess-free performance
                                                                               •   Complete adapter kit is included featuring three extraction tubes

                                                                               Description                                                           Part No.
                           SCEPTER FLEXIBLE FUNNEL                             Moeller Oil Extractor (6.5 Liter Fluid Extractor)                    MR07398
              Scepter’s flexible funnel is perfect for all your PWC uses       *Note: Not for use with gasoline.
            and really helps perform those difficult maintenance and
repair applications. Manufactured from quality, high density polymers:               USA Patent #5450924 Germany Patent #29500683.8 U.K. Patent #2272948
                                                                                    Australia Patent #674469 Taiwan Patent #113238 China Patent #ZL92241981.7
the funnel won’t rust, dent, or crack. This means no drips and leaks
for you to clean up after your done. The funnel length is 18”.
Description                                                         Part No.                                           FX-SHO/FZR/FZS ENGINE
Scepter 18” Flexible Funnel                                        MR03603
                                                                                                                               SHIMS
                                                                                                                Engine shims are essential for precise
                                           NGK SPECIAL                         engine alignment. R&D Engine Shims have a tab that provides easy
                                          SPARK PLUGS                          insertion and removal. Shims are made of stainless steel and have
                                                                               etched numbers to identify thickness. Shims available in thickness of
                                            FOR FOUR                           .010”, .020”, .050”, .100”
                                         STROKE ENGINES                        Description                                   Thickness                Part No.
                                                                               FX-SHO/FZR/FZS             Engine   Shims       .010”               050-00010
Description                                                         Part No.   FX-SHO/FZR/FZS             Engine   Shims       .020”               050-00020
Yamaha FX SHO/FX Cruiser SHO/FZR (10 plugs per box)                 LFR6A      FX-SHO/FZR/FZS             Engine   Shims       .050”               050-00050
                                                                               FX-SHO/FZR/FZS             Engine   Shims       .100”               050-00100
8
                                        FX SHO & FX CRUISER SHO • CONTROL
                                           R&D YAMAHA SHO                                                             RIVA YAMAHA RIDE
                                           AQUAVEIN INTAKE                                                             YAMAHA FX-SHO
                                                GRATE                                                                PERFORMANCE PLATE
    FX SHO                       The R&D Yamaha SHO Aquavein                                                       Our Performance Ride Plate for
   112-18000                     Intake Grate will significantly                                                   the new SHO improves top
                                 reduce cavitation, increase accel-                                                speed and reduces porposing.
                                 eration, add up to 1 mph on top                                                   Unique design provides quicker
end performance, and keep the pump loaded and hooked up!                                                           planing and improved handling.
                                                                                                                   Compatible with OEM speedo
Description                                                       Part No.    sender. Power coated to prevent corrosion.
R&D Yamaha FX SHO Aquavein Intake Grate                        112-18000
R&D Yamaha FZR Aquavein Intake Grate                           112-18001      Description                                                   Part No.
                                                                              Riva Yamaha FX-SHO Performance Ride Plate                    RY21040
                                         RIVA YAMAHA FX-SHO
                                            INTAKE GRATE                                                          R&D SHO SPONSON KIT
                                           Riva’s Top-Loader intake grate                                           The new R&D Yamaha SHO Pro
                                           improves hook up and handling                                            Series Sponson Kit was designed
                                           in rough conditions. Center                                              and developed with all new gener-
                                           wing eliminates prop spin and                                            ation performance concepts in
                                           cavitation found with the stock                                          mind to deliver a whole new level
                                           grate along with the SHO’s ten-                                          of handling and speed perform-
                                           dency to drop on its nose when                                           ance with offshore and closed
the throttle is let off at high speeds. Powder coated to prevent corrosion.                                         course race proven adjustability
                                                                              options. The R&D Pro Series Sponson Kits have been extensively
Description                                                       Part No.    offshore, race track, and 1 and 2 up recreational tested to guarantee
Riva Yamaha FX-SHO Intake Grate                                  RY22040      a comfortable setting for any riding style or condition! The R&D
                                                                              Sponson Kit will deliver higher top speed performance and a much
                         FX SHO                                               smoother and more predictable ride over O.E.M. sponsons. Low
                        122-18000
                                                R&D SHO HIGH                  speed and high-speed turns are a breeze with new found control.
                                                PERFORMANCE                   The secret to R&D’s new generation concept is in the backing plate
                                                                              design with an aftermarket first, low pressure, low friction concept
                                                 RIDE PLATE                   that breaks up and relieves speed robbing drag within the sponson’s
                                              The R&D Yamaha SHO Pro          backing plate channel. The new R&D design staggers the sponson
                                              Series Ride Plate was           blades fins water trapping area to pick up less water in the front and
                                              developed using many of         more in the back. The stagger/step-up concept greatly reduces chine
                                              R&D’s race proven con-          walk in high speed corners, while allowing more rear end grip. There
                                              cepts that have powered         is also a higher end recreational/race setting with enough grip for the
Factory Yamaha Race Teams to Pro Open World Championships. The                best of pro’s! Finally there is an aftermarket sponson kit that really
new R&D SHO Ride Plate delivers a perfect balance of increased top            does it all! More top speed due to less drag, less chine walking, racer
speed performance, improved cornering capabilities, and superb                preferred rear end grip, and unmatched straight line stability.
straight line stability. Increased top speed performance of .50 to 1 MPH
over stock, and compromises nothing when turned loose in rough                Description                                                    Part No.
water conditions. “Let the big dog eat” as they say, the R&D plate loves      R&D SHO Sponson Kit                                         122-01800
rough water! Bow search with full fuel loads is alleviated completely.
The new R&D SHO Pro Series Ride Plate will meet the demands in
performance whether being used for weekend recreational riding,
closed course racing, or offshore competition. No other ride plate
                                                                                                                        RIVA YAMAHA FX-
design concepts compare to R&D! GUARANTEED                                                                               SHO/FZR/FZS/VX
Mike Follmer, 2002 Off-Shore National Champion a Yamaha SHO
owner says, "This kit makes my SHO feel more like my GP 1300R's
                                                                                                                          SPONSON KIT
handling! It turns tighter and it's much more stable at top speed!"                                                   Unique blade design provides a
                                                                                                                      significant improvement to the
                                                                                                                      handling characteristics.
• 1 MPH top speed improvement
                                                                                                                      Reduces rough water hunting
• Race proven designs for over a decade
                                                                                                                      and rolling sometimes experi-
• Unique multi-step concept
                                                                                                                      enced with stock sponsons.
• Improved straight line stability
                                                                              Sponson depth is adjustable to control the amount of influence they
• Significantly improved cornering
                                                                              have on craft. Easily installs to stock mounting points with our bullet-
• Reduced chine walking on high speed sweepers
                                                                              proof mounting system that features billet inserts in sponson fins. Fits
• Drives through chop with superior stability
                                                                              all Yamaha FX-SHO, FZR, FZS & VX models.
• Retains reverse gate mounting and operation

Description                                                       Part No.    Description                                                     Part No.
R&D FX SHO High Performance Ride Plate                         122-18000      Riva Yamaha FX-SHO/FZR/FZS/VX Sponsons Kit                     RY2625
R&D FZR High Performance Ride Plate                            122-18001
                                                                                                                                                    9
                                       FX SHO & FX CRUISER SHO • CONTROL
                                             R&D SHO PUMP                                                              R&D FX-SHO/FZR/FZS
                                               SEAL KIT                                                                 AUTO TRIM NOZZLE
                                         R&D's new pump seal kit for
                                         the SHO stuffs up all the
                                                                                                                               KIT
                                                                                                                      The R&D FX-SHO/FZR/FZS
                                         unwanted cavities in the pump
                                                                                                                      Auto Trim Kit was developed
                                         shoe that aid in producing cav-
                                                                                                                      to accommodate the O.E.M.
                                         itation. This kit offers a way to
                                                                                                                      VTS Quick Shift System with
                                         seal the pump shoe, which will
                                                                                                                      a fully adjustable and fully
                                         reduce cavitation and increase
                                                                                                                      automatic trim system! The
pump efficiency and performance.
                                                                                                                      R&D Auto Trim automatically
                                                                                                                      drops a rider preferred and
Description                                                     Part No.
                                                                                                                      adjustable 2-8 degrees. Drive
R&D FX SHO Pump Seal Kit for OEM Intake Grate                 162-00003
                                                                             from turn to turn never worrying whether the trim is in the best posi-
R&D FX SHO Pump Seal Kit for Riva Racing Intake Grate         162-00004
                                                                             tion for perfect turn negotiation! The R&D Auto Trim allows you to set
R&D FX SHO Pump Seal Kit for R&D Aquavein Intake Grate        162-00005
                                                                             the trim up your way to carve perfect turn every time! For long straight
R&D FZR Pump Seal Kit for OEM Intake Grate                    162-00006
                                                                             rides the R&D Auto Trim System works in conjunction with O.E.M
R&D FZR Pump Seal Kit for R&D Aquavein Intake Grate           162-00007
                                                                             VTS, so stock trim settings are retained, while the R&D Auto Trim
                                                                             takes over in the turns. The combination allows the best of both
                                            RIVA FX SHO                      worlds for recreational and closed course riding!
                                           PUMP SEAL KIT                     Description                                                     Part No.
                                    Dramatically reduce cavitation and
                                                                             R&D FX-SHO/FZR/FZS Auto Trim Nozzle Kit                      162-18010
                                    prop spin with our easy to install
                                    Pump Seal Kit. Location specific,
                                    molded inserts fill the voids in                                                      R&D SHO HYDRO
                                    intake grate that can bleed air into
                                    pump causing cavitation.
                                                                                                                          FORCE STEERING
                                    Specifically designed for craft using                                                     NOZZLE
                                    RIVA FX-SHO intake grate (part#                                                     R&D’s new Hydro Force
RY22040). Includes detailed installation instructions.                                                                  Steering Nozzle for the FX-
                                                                                                                        SHO/FZR/FZS is a direct
Description                                                     Part No.                                                replacement nozzle. The new
Riva FX SHO Pump Seal kit for Riva Intake Grate                RY25040                                                  lengthened design delivers a
                                                                                                                        full 1 MPH speed gain over
                                      R&D SHO                                                                           stock. The adjustable pivot
                                                                                                                        position improves the turning
                                ANTI-CAVITATION CONE                                                                    radius allowing you to carve
                           The R&D FX-SHO/FZR/FZS Anti-Cavitation            tighter turns with a more positive feel. Improved performance through
                           Pump Cone Kit will reduce overall internal        speed, acceleration and handling.
                           pump cavitation within the Yamaha's offset
                                                                             Description                                                    Part No.
                           reduction/compression nozzle design. The
                                                                             R&D FX-SHO/FZR/FZS Hydro Force Steering Nozzle               162-14000
                           O.E.M. reduction/compression nozzle is off-
                           set, while the O.E.M. pump cone/bearing cap
                           remains straight which causes uneven pres-
                           sures within the pump and reduction nozzle.
                                                                                                                      R&D FX-SHO/FZR/FZS
The R&D Anti-Cavitation Pump Cone is offset and reshaped to match                                                       VTS QUICK SHIFT
the O.E.M. reduction nozzle offset promoting even pressures, which will
substantially reduce cavitation, increase pump hook up, boost accelera-                                                     CAM KIT
tion, and increase top speed performance.                                                                              The R&D FX-SHO/FZR/FZS
                                                                                                                       VTS Trim Driver Cam is a cam
Description                                                     Part No.                                               device that installs directly in
R&D FX-SHO/FZR/FZS Anti-Cavitation Cone                      162-18000                                                 place of the O.E.M. plastic
                                                                                                                       VTS trim driver cam. The R&D
                                                                             cam is designed to recalibrate the trim position amount from an O.E.M.
                              FX-SHO/FZR/FZS IMPELLER                        7 to 8 degree per shift to a finer and speed friendly 4 degree per shift.
                                 SHAFT HOLDER TOOL                           The O.E.M. SHO neutral position setting is 85 degree or 5 degree up
                           Developed specifically for the                    from horizontal zero. The new recalibrated position with the new R&D
                           FX-SHO/FZR/FZS watercraft, this tool is           Trim Cam is 87.5 degrees or 2.5 degree up from horizontal zero. The
                           required to change the impeller.                  R&D Trim Cam will deliver a more positive group of adjustments that
                                                                             will allow much better turning capabilities, as well as finer adjustments
                                                                             for rough water conditions. The R&D Trim Cam will work with the
                                                                             O.E.M. trim nozzle assembly, or the R&D Auto Trim Kit.
Description                                                    Part No.
FX-SHO/FZR/FZS Impeller Tool                                 TOOL #53        Description                                                     Part No.
                                                                             R&D FX-SHO/FZR/FZS VTS Trim Driver Cam Kit                   162-18101
          FX SHO & FX CRUISER SHO • SEAT COVERS - MATS - ACCESSORIES



                                                                                      HYDROTURF MATS FOR FX SHO
                                                                          Description                                              Part No.
                                                                          Hydroturf Mat FX SHO (08)/FX Cruiser (08)                HTFX1




     HYDROTURF YAMAHA FX SHO SEAT COVER
Nice clean lines. Looks great in a simple Dk.Gray Carbon Fiber and
Black Vinyl combination or you can use our pattern to create your own
color scheme. Choose from all our vinyl, carbon fiber, non-slip and
metallic fabrics. Note: All seat covers are custom made. There are no
refunds or exchanges on any upholstery items. Color swatches will be
sent to you upon request prior to placing your order.

Description                                                   Part No.                  HOT PRODUCTS DECAL SHEET
Hydroturf Yamaha FX SHO Seat Cover                           SEWFX1
                                                                          Description                                              Part No.
                                                                          Hot Products Decal Sheet 8” x 12 1/2”                   70-9148

                                                                                                                               HOT
                                                                                                                            PRODUCTS
                                                                                                                             BEANIES
  YAMAHA SHO
       FRONT
                       TOP 1           TOP 2          REAR TOP
       (CLOTH)
                       (CLOTH)         (CLOTH)        (CLOTH)
       (COLOR)
                       (COLOR)         (COLOR)        (COLOR)             Description                                              Part No.
                                                                          Hot Products Racing Beanies - Orange               70-9004-ORG
                                                                          Hot Products Racing Beanies - Black                70-9004-BLK




                                                       TAIL
 FRONT SIDE                                            (CLOTH)
 (CLOTH)                 SIDE 2                        (COLOR)
 (COLOR)                 (CLOTH)
                                         REAR SIDE
                         (COLOR)
                                         (CLOTH)
            SIDE 1                       (COLOR)
            (CLOTH)
            (COLOR)




              JETTRIM YAMAHA SEAT COVER                                      HOT PRODUCTS 25TH ANNIVERSARY T-SHIRT
Jet Trim seats covers are developed to the highest performance
standards and design trends for the PWC industry.                         Description                                              Part No.
                                                                          Hot Products 25th Anniversary T-Shirt - X-Large      70-9025-XL
                                                                          Hot Products 25th Anniversary T-Shirt - Large         70-9025-L
Description                                                    Part No.
                                                                          Hot Products 25th Anniversary T-Shirt - Medium        70-9025-M
Jettrim Yamaha FX SHO Custom Seat Cover                      YSHO101
                                                                          Hot Products 25th Anniversary T-Shirt - Small         70-9025-S
*Note: Seat cover for FX Cruiser is currently not available.
                                                                                                                                        11
                     FX SHO & FX CRUISER SHO • QUICK REFERENCE GUIDE
Part No     Description                                          Availability    Part No         Description                                      Availability
112-18000   FX SHO Aquavein Intake Grate                          Oct. 2008      613-95260       FX-SHO/FZR/FZS Billet Surge                             Now
112-18001   FX FZR Aquavein Intake Grate                               2009                      Protector Valve & Filter Kit
122-01800   FX SHO R&D Sponson Kit                                      Now      660-18000       FX-SHO/FZR/FZS Intercooler Cooling Kit                  Now
122-18000   FX SHO High Performance Ride Plate                          Now      660-82511       FX-SHO/FZR/FZS Intercooler Temperature                  Now
122-18001   FX FZR High Performance Ride Plate                         2009                      Control Pressure Relief Valve Kit
162-00003   FX SHO R&D Pump Seal Kit for OEM Intake Grate               Now      802-00080       FX-SHO/FZR/FZS Fuel Pressure Regulator Kit        Oct. 2008
162-00004   FX SHO R&D Pump Seal Kit for Riva Intake Grate              Now      802-18000       FX-SHO/FZR/FZS Powershot Adjustable Fuel Tuner         2009
162-00005   FX SHO R&D Pump Seal Kit for Aquavein Intake Grate    Oct. 2008      812-18000       FX-SHO/FZR/FZS High Perf. Fuel Injector Kit             Now
162-00006   FX FZR R&D Pump Seal Kit for OEM Intake Grate              2009      812-35190       FX-SHO/FZR/FZS 190LPH OEM Repl. Fuel Pump Kit           Now
162-00007   FX FZR R&D Pump Seal for Aquavein Intake Grate             2009      812-35255       FX-SHO/FZR/FZS 255LPH Low Pres. Fuel Pump Kit           Now
162-14000   FX-SHO/FZR/FZS Hydro Force Steering Nozzle                  Now      812-35256       FX-SHO/FZR/FZS 255LPH High Pres. Fuel Pump Kit          Now
162-18000   FX-SHO/FZR/FZS Anti Cavitation Cone                         Now      812-35257       FX-SHO/FZR/FZS In-Tank Fuel Pressure              Oct. 2008
162-18010   FX-SHO/FZR/FZS R&D VTS Trim Driver Cam Kit                  Now                      Regulator Block Off Kit
162-18020   FX-SHO/FZR/FZS R&D Auto Trim Nozzle Kit                     Now      KN303           K&N Yamaha 4-Stroke PWC Oil Filter                      Now
200-01800   FX-SHO/FZR/FZS Power Plenum Flame Arrester                  Now      LFR6A           FX-SHO/FZR/FZS NGK Spark Plug Box (10 per box)          Now
200-01801   FX-SHO/FZR/FZS Power Plenum Air Filter Kit                  Now      MR03603         Scepter Flexible Funnel                                 Now
332-18000   FX-SHO/FZR/FZS High Flow Exhaust Kit                        Now      MR07398         Moeller Marine Products Fluid Extractor                 Now
332-18010   FX-SHO/FZR/FZS/140/HO/GPR/VX110                             Now      RY11840-01-C FX-SHO/FZR/FZS Pro Series ECU                        Dec. 2008
            O2 Sensor Mount Kit                                                  RY12040-I-KIT   FX-SHO/FZR/FZS Pro Series Fuel Injector Kit       Dec. 2008
612-00082   R&D #4 Fuel Return Line Kit                                 Now      RY12040-IMUK FX-SHO/FZR/FZS Intake Manifold Upgrade Kit                 Now
612-00083   R&D #6 Fuel Return Line Kit                                 Now      RY13040         FX-SHO/FZR/FZS Performance Power Filter Kit             Now
612-18000   FX-SHO/FZR/FZS Intake Manifold/Intercooler CFM Kit          Now      RY16040         FX-SHO/FZR/FZS Free Flow Exhaust Kit                    Now
612-18001   FX-SHO/FZR/FZS Stage1 Intercooler Core Kit            Oct. 2008      RY17040-PC      FX-SHO/FZR/FZS Power Cooler                       Oct. 2008
612-18002   FX-SHO/FZR/FZS 300+ HP Intercooler Kit                     2009      RY17040-SCI-1 FX-SHO/FZR/FZS Pro Series Supercharger Impeller     Oct. 2008
612-18007   FX-SHO/FZR/FZS Silicon Intake Hose Kit                Oct. 2008      RY21040         FX SHO Riva Performance Ride Plate                Nov. 2008
612-18008   FX-SHO/FZR/FZS Surge Protector Kit                    Oct. 2008      RY22040         FX SHO Riva Intake Grate                                Now
612-25001   FX-SHO/FZR/FZS C1 Monster Charger Wheel               Oct. 2008      RY25040         FX SHO Pump Seal Kit for Riva Grate                     Now
612-92005   FX-SHO/FZR/FZS Multi-Pressure Port                    Nov. 2008      RY2625          FX-SHO/FZR/FZS,140/VX110 Sponson Kit                    Now
            Boost Gauge/Surge/RRFPS Adaptor Kit                                  RY-RPM-FXSHO FX-SHO/FZR/FZS RPM Kit                                     Now
612-92010   FX-SHO/FZR/FZS Supercharger                                 Now      SEWFX1          FX SHO Hydro Turf Seat Cover                            Now
            Housing Holder Bracket Tool                                          TOOL#53         FX-SHO/FZR/FZS/HO Impeller Shaft Holder Tool            Now
612-92011   FX-SHO/FZR/FZS Shaft/Gear Holding Tool                      Now      YSHO101         FX SHO Jettrim Custom Seat Cover                        Now
                                                                                 SEE PAGE 8      FX-SHO/FZR/FZS Engine Shim                              Now
                           *Some products featured in this catalog supplement are for competition use only per US EPA regulations.




          ORDER HOT LINE 1-800-762-1633 • CUSTOMER SERVICE 1-858-453-4454
                                  — TO FAX YOUR ORDERS —
                1-858-453-2046 (Domestic) *Includes Alaska, Hawaii, Guam & Puerto Rico
                                                     1-858-453-2045 (International)
                          Hot Products • 8830 Rehco Road Suite F • San Diego, CA 92121

                                   www.HotProductsUSA.com

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:609
posted:3/30/2011
language:English
pages:12