Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

E38 Seat Removal - RA Removing and installing left or right front by nyut545e2

VIEWS: 93 PAGES: 3

									                                                                52 14 000        Removing and installing left or right front
                                                                                 seat (normal / electric)


                                                                Note:
                                                                    Removal for defective transmission for longitudinal seat
                                                                    adjustment,
                                                                    refer to 52 14 899
                                                                    Move front seat as far forwards/upwards as possible.


                                                                Important!
                                                                   Note safety regulations on handling airbag modules and
                                                                   pyrotechnical seatbelt tensioners,
                                                                   refer to HG-72
                                                                   Improper handling can lead to triggering of the pyrotechnical
                                                                   seat belt tensioner or side airbag, resulting in injuries.
                                                                   Switch off ignition.




                                                                Unfasten seatbelt screw.
                                                                Tightening torque, refer to Technical Data 72 11 1AZ




                                                                Pull retainer (1) backwards to unlock and pull inwards to
                                                                remove. Lift Bowden cable (2) for seatbelt height adjustment
                                                                forwards to remove.




RA Removing and installing left or right front seat (normal / electric)                   BMW AG - TIS             29.11.2008 22:34
Issue status (01/2005) Valid only until next CD is issued                                 Copyright                       Page - 1 -
                                                                Important!
                                                                   Failure to comply with this disassembly sequence causes
                                                                   the web (4) to break, thereby destroying the finisher.
                                                                Move front seat into furthest forrward position.
                                                                (1) Raise centre finisher slightly on detent head,
                                                                (2) Unlock and lift out inner clip tabs,
                                                                (3) Pull finisher backwards to remove.




                                                                Only US driver's side:
                                                                Pull off detent (1) for longitudinal seat adjustment.




                                                                Unfasten screws.
                                                                Tightening torque, refer to Technical Data 52 10 1AZ
                                                                Move front seat as far back as possible.




                                                                (A) Unlock cover and fold forwards.
                                                                (B) Disconnect connector (1) and remove (2).




RA Removing and installing left or right front seat (normal / electric)                    BMW AG - TIS                 29.11.2008 22:34
Issue status (01/2005) Valid only until next CD is issued                                  Copyright                           Page - 2 -
                                                                Up to 1996 model:
                                                                Unfasten screw.
                                                                Tightening torque, refer to Technical Data 52 10 5AZ
                                                                Unclip inner finisher (1) and pull forwards (2) to remove.




                                                                Up to 1996 model:
                                                                Unfasten screws and lift out front seat.
                                                                Note:
                                                                     If the screws are not accessible, dismantle seat rail finishers
                                                                     inside,
                                                                     refer to 52 17 010




                                                                As of model year 1996:
                                                                Unfasten screws (1) and lift out front seat.
                                                                Note:
                                                                   If the screws are not accessible, dismantle seat rail finishers
                                                                   inside,
                                                                   refer to 52 17 010




                                                                Installation:
                                                                     Floor carpet must not enter area between seat rails and floor
                                                                     panel beside screw points (grating noises).
                                                                Tightening sequence:
                                                                Tightening torque, refer to Technical Data 52 10 1AZ
                                                                Front inner, outer then rear inner, outer.




RA Removing and installing left or right front seat (normal / electric)                    BMW AG - TIS               29.11.2008 22:34
Issue status (01/2005) Valid only until next CD is issued                                  Copyright                         Page - 3 -

								
To top