Docstoc
EXCLUSIVE OFFER FOR DOCSTOC USERS
Try the all-new QuickBooks Online for FREE.  No credit card required.

Cover & P04 Newsindd

Document Sample
Cover & P04 Newsindd Powered By Docstoc
					                                                                                                  Official                                                  NEWS
                                                                                         Show Daily
                                                                                         Published by:                          Organised by:




                                            • S i ng ap ore E x p o | • 2 3 - 2 6 M a rch 2 0 1 1 | • w ww. mt a-as i a. c o m
                                                                                                                                                             issue       1
            PRECISION ENGINEERING TRADE EVENT
      TO SUPPORT INDUSTRY’S MOVE
            UP VALUE CHAIN
     MTA2011 to zoom in on key growth sectors such as aerospace, oil & gas and medical technology.




                                              Seizing new opportunities in                the traditional precision engineering        on-year growth since 2004. Indonesia’s



B
           oosted by the steadily
           recovering manufacturing           manufacturing clusters such as              base. This will complement existing          economic growth accelerated in the
           sector in Singapore and            aerospace, oil & gas, and medical           capabilities and at the same time,           first three months of 2010 to the
           the region, MTA2011, the           technology, MTA2011 will focus              allow buyers to be better equipped           fastest pace since the third quarter of
leading trade exhibition and business         on these verticals by grouping              to meet new challenges in areas that         2008, expanding 5.7 percent in the first
forum for the precision engineering           technologies and applications under         some of them might not have explored.        quarter from the corresponding period
industries in Southeast Asia, will return     them. This enables buyers from                                                           in 2009.
strongly from 23 - 26 March 2011, at          specific industries to better navigate      Confidence has returned to the
the Singapore Expo.                           as well as explore new applications for     manufacturing sector following strong        While the immediate health of
                                              their businesses.                           rebounds in industry and economic            the manufacturing sector in the
Industry professionals and business                                                       performances in 2010. Singapore’s            region looks rosy, industry players
visitors from Southeast Asia, India           STATE-OF-THE-ART                            manufacturing activity soared by 58.6        understand that dependence on the
and China are expected to form the            As such, exhibitors of the show have        percent year on year in May, while           mass production of uncomplicated
majority of the attendees at this key         been encouraged to bring state-of-          Malaysia’s industrial sector produced        components and standardised product
industry networking, sourcing and             the-art machines specifically for these     14.1 percent more goods in March             must be reduced. Demand for such
knowledge sharing platform.                   sectors, in addition to those that serve    than a year earlier, the strongest year-     output can be highly volatile and trade

   www.MWAsiamag.com                                                                                                                                23 March 2011 | Issue 1 | 1
                                                                                                                                                                                         NEWS
                                                                                                                                                                   new business opportunities,” said
                                                                                                                                                                   William Lim. The Precision Engineering
                                                                                                                                                                   Business Forum will also return to
                                                                                                                                                                   facilitate the exchange of knowledge
                                                                                                                                                                   and sharing of collaboration strategies
                                                                                                                                                                   and partnership opportunities for the
                                                                                                                                                                   industry. The programme is designed
                                                                                                                                                                   to gather senior executives from
                                                                                                                                                                   international manufacturing OEMs and
                                                                                                                                                                   various tiered suppliers to meet and
                                                                                                                                                                   discuss how precision engineering will
                                                                                                                                                                   drive manufacturing investments and
                                                                                                                                                                   technologies.

                                                                                                                                                                   MTA2011 will also incorporate
                                                                                                                                                                   MetalAsia2011, MetrologyAsia2011,
                                                                                                                                                                   OutSource&SubCon2011,
                                                                                                                                                                   iAutomation2011, WeldTech2011 and
                                                                                                                                                                   ToolTec2011, all specialised events
                                                                                                                                                                   that cater to the individual needs of
                                                                                                                                                                   Asia’s manufacturing industry.



regulations, political and economic                              The numbers speak for themselves.                         gives them an opportunity to network
situations can all drastically affect the                        Taking Singapore as an example, the                       with buyers, sellers, partners and
health of the manufacturing sector.                              year on year growth for the general                       industry experts, thereby enhancing
With the China-ASEAN Free Trade                                  manufacturing industries was 18.5                         their capabilities and opening up
Agreement (CAFTA) in place on 1                                  percent compared with an impressive
January 2010, zero-tariff made-in-                               40.5 percent growth for the precision
China products and components will                               engineering cluster. The biomedical
infiltrate previously sheltered markets                          and electronics manufacturing sectors                         MTA2011 AT A GLANCE
in Southeast Asia.                                               also rose 117.0 percent and 51.8 per                          Show: MTA2011 - The 18th Precision Engineering Industry Event
                                                                 cent respectively.
“It is clear that moving up the                                                                                                Incorporating: ToolTec 2011, MetrologyAsia 2011, iAutomation 2011,
manufacturing value chain into high                              “MTA2011 supports the progression                                            MetalAsia 2011, WeldTech 2011, Outsource&SubCon 2011
value sectors is imperative to long                              of the region’s manufacturing
term growth. The time is right for                               industry into the high mix low volume                         Date: 23 – 26 March 2011 (Wednesday – Saturday)
industry players to step up their                                environments. The exhibition plays an                         Venue: Singapore Expo
efforts to grow their manufacturing                              important role as the premier sourcing
capabilities,” said William Lim,                                 platform for players in the region to                         Opening Hours: 10.30am to 6pm
project director at Singapore                                    access the latest precision engineering
Exhibition Services, the organiser of                            and machine tool technologies                                 Admission: Business and trade professionals only
MTA2011.                                                         available in the global market. It also



    Published by:
                                                                                                                                                         Metalworking Asia is the primary source
                                                                                                                                                            t
                                                                                                                                                         Meta
                                                                                                                                                         of in
                                                                                                                                                         of information for the metalworking and
                                                                                                                                                          precision engineering
                                                                                                                                                          prec              ing
                                                                                                                                                           ind
                                                                                                                                                           industries.            App
                                                                                                                                                                                      ly    r   ou
                                                                                                                                                                                            or y
    ASSOCIATE PUBLISHER                                      PUBLISHING SUPPORT
    Alvin Lim, alvin.lim@tenalpsasia.com                     Production Manager
                                                                                                                                                                                       ne f

                                                                                                                                                                                       FbscEpEon
                                                             Pauline Goh, pauline.goh@tenalpsasia.com                                                                             onli
    EDITORIAL
    Group Editor
    Bob Gill, bob.gill@tenalpsasia.com
                                                             Design Manager
                                                             Honess Ho, honess.ho@tenalpsasia.com
                                                             Graphic Designer
                                                                                                                                                                                        Rri ti
    Editor                                                   Elsie Chin, elsie.chin@tenalpsasia.com                                                                                    Su       y!
    Lee Kok Leong,
    kokleong.lee@tenalpsasia.com
                                                             Marketing and Distribution Manager                                                                                             toda
                                                             David Low, david.low@tenalpsasia.com
                                                             Marketing Executive
    SALES & AD ADMIN                                         Laura Low, laura.low@tenalpsasia.com
    Account Executive                                        E-Business Manager                                                                                         www.mwasiamag.com/subs
    Benjamin Song, (65) 6521 9741                            Sam Soh, sam.soh@tenalpsasia.com
    benjamin.song@tenalpsasia.com
    Admin Executive                                          TEN ALPS COMMUNICATIONS ASIA PTE LTD
    Chrissy Lee, (65) 6521 9751                              CEO
    chrissy.lee@tenalpsasia.com                              Raymond Wong, raymond.wong@tenalpsasia.com
                                                                                                                                                MTA2011 Official Lubricant Sponsor
                                   Ten Alps Communications Asia Pte Ltd
                                   67 Ubi Avenue 1, #06-06 StarHub Green, North Wing, Singapore 408942.
                                   Tel (65) 6521 9777 Fax (65) 6521 9788
                                   www.tenalpsasia.com

    The show daily is published by Metalworking Asia, who is solely responsible for its editorial content. The editorial
    content is not necessarily the opinion of the event organiser.




   www.MWAsiamag.com                                                                                                                                                              23 March 2011 | Issue 1 | 3
NEWS

                         PRECISION ENGINEERING FIRMS
                      WILL GAIN FROM HAVING
                        A GREEN STRATEGY
      Experts provide insights on sustainable manufacturing at Precision Engineering Business Forum.

                                                                                     speakers and delegates, the forum          for high value-add services by PE
                                                                                     also offers opportunities to meet          companies.
                                                                                     strategic partners and explore
                                                                                     business deals."                           As an emerging trend, PE companies
                                                                                                                                also have the opportunity to become
                                                                                     EMBRACING                                  remanufacturers either by themselves,
                                                                                     SUSTAINABILITY                             or with partners and traders. SMC's
                                                                                     At the Precision Engineering Business      strategy will be to help PE companies
                                                                                     Forum 2011, Dr Song will share             develop novel enabling technologies
                                                                                     with participants the Sustainable          for an internationally competitive
                                                                                     Manufacturing Centre's (SMC) efforts       remanufacturing industry in Singapore.
                                                                                     to assist the manufacturing industry       Other areas that Dr Song will share
                                                                                     in embracing sustainability through        insights on are carbon footprint
                                                                                     technology innovation, implementation      assessment and reduction planning,
                                                                                     and services.                              and green packaging. These initiatives
                                                                                                                                help companies understand their
                                                                                     One focus area is remanufacturing.         eco-performances and establish green
                                                                                     Remanufacturing replaces parts             strategies, and develop innovative
                                                                                     subjected to degradation but retains       technologies in the green packaging
                                                                                     most of the value of original parts and    industry.
                                                                                     products. The process represents
                                                                                     significant savings in energy, water and   "Many companies are not aware of the
                                                                                     materials. With the remanufactured         impact of sustainable manufacturing
                                                                                     machines matching performance              yet. This means that there are windows
                                                                                     expectations of new machines, this         of opportunities for differentiation
                                                                                     process presents rich opportunities        and competitive advantages. At
                                                                                                                                SIMTech, we are actively developing



P
           recision engineering (PE)       Held alongside MTA2011 – the leading
                                                                                                                                enabling and new technologies that
           companies that embrace          trade exhibition for the precision
                                                                                                                                allow PE companies to reduce energy
           sustainable manufacturing       engineering industries in Southeast
                                                                                                                                consumption, save materials, and
           sooner rather than later        Asia - the Precision Engineering
                                                                                                                                increase value-add," said Dr Song.
will gain a competitive advantage          Business Forum 2011 is the only
and be rewarded with new business          conference of its kind in the region,
                                                                                                                                Aside from SIMTech, the forum boasts
opportunities. This is according to Dr     and will be attended by key original
                                                                                                                                a panel of speakers including industry
Song Bin, director of the Sustainable      equipment manufacturers (OEMs), top
                                                                                                                                experts from Boeing, GE Healthcare,
Manufacturing Centre at the Singapore      tier contract manufacturers, leading
                                                                                                                                Rolls-Royce and Schlumberger, who
Institute of Manufacturing Technology      researchers and industry practitioners.
                                                                                                                                will introduce thought-provoking
(SIMTech).
                                                                                                                                presentations and discussions over the
                                           The event is jointly organised by
                                                                                                                                two-day conference.
Global product manufacturers are           Singapore Exhibition Services (SES)
setting eco-targets and have started to    and SIMTech. This year, the forum
include eco-indicators as part of their    features topics along focused tracks
                                                                                         PRECISION ENGINEERING BUSINESS FORUM 2011
supplier selection criteria. At present,   for the strategic growth sectors of
PE companies are encouraged to             aerospace, medical technology, oil &
                                                                                         Date: 24 - 25 March 2011 (Thursday & Friday)
measure and disclose their eco-            gas and surface finishing.
performance but this will likely become                                                  Venue: Singapore Expo, Conference Hall J & K
a requirement very soon.                   Lindy Wee, director of PR &
                                           Conferences at SES says, "The                 Time: Conference Day 1 - Medical Technology & Aerospace Tracks
Sustainable manufacturing is just          Precision Engineering Business Forum                                   10am - 5.15pm
one of the many topics that will be        provides industry professionals with                Conference Day 2 - Oil & Gas and Surface Finishing Tracks
presented at the Precision Engineering     a knowledge-sharing platform for                                       10am - 4.30pm
Business Forum 2011, which returns         discussing the latest developments
                                                                                         Admission: Registered business and trade professionals only
for another edition this year from 24 -    and pertinent business and technology
25 March at the Singapore Expo.            issues today. With a list of prominent

4 | Issue 1 | 23 March 2011                                                                                                                         www.MWAsiamag.com
        LaserControl NT




                                                         NT Technology


                                                         Length measurement


                                                         Radius measurement


                                                         Breakage detection


                                                         Form monitoring


                                                         RunoutControl


                                                         Axes compensation


                                                         MicroWearControl




No. 1 World Wide. High Performance. Blum.




www.blum-novotest.com                   Production Metrology Made in Germany
TECHNOLOGY

                                            LASER TRACKERS
 The laser tracker gives aerospace manufacturers the ability to be more cost competitive by shifting the
            whole process of design and development into the virtual realm. By Ken Steffey.

                                                                                        – to an accuracy up to 0.00012”            made of the same material as the part
                                                                                        (0.003mm).                                 so that both the part and the frame
                                                                                                                                   expand and contract at the same rate
                                                                                        The laser tracker is linked to a           (due to any changes in temperature).
                                                                                        portable computer where real-time          Other aspects of the tool are referred
                                                                                        measurements are verified against a        to as details. The first type of detail
                                                                                        master CAD file. Since it is accurate      is a pad. Pads are a protected
                                                                                        and simple to operate, many users          place for the part to rest against.
                                                                                        also apply it to parts that are modest     Pads can be flat (planar) or curved,
                                                                                        in size – around three feet on their       depending on the size and shape of
                                                                                        largest dimension. The measuring           the part. Working along with the pads,
                                                                                        rate of a laser tracker is at least 20     clamping fixtures force the part tightly
                                                                                        times faster than theodolites. As a        against the pad. The second type of
                                                                                        result of its speed, engineers can take    detail is a hole locator. Hole locators
                                                                                        dimensional snapshots of a project         have pins of various shapes that the
                                                                                        as they make incremental changes           allow the user to correctly position the
                                                                                        to a model or tool layout, and then        part on the tool.
                                                                                        measure it with the laser tracker to see
                                                                                        how parts or surfaces interact with        Pads are perfect for supporting the
                                                                                        each other. Since each measuring           part but they will generally secure
                                                                                        cycle usually takes only a couple of       it in only one direction. The hole
                                                                                        minutes, adjustments can be small,         locators are then used to ensure the
                                                                                        enabling the design team and tool          repeatable positioning of the part
                                                                                        makers to prudently close in on the        in the final assembly. This can be
                                                                                        final shape they are seeking.              accomplished by using pins that




B
            uilding aircraft has always     a few hundred points, depending on                                                     match up against either holes or slots
            been a struggle between         obstructions.                               Repeatability and replaceability of        to constrain
            the size of their components                                                parts and assemblies has existed           movement in specific directions or
            and the need to craft them      With the advent of the laser tracker,       for some time, but the quality is          orientations. Together, these details
carefully. More than any other device,      precise, rapid, reproducible measuring      constantly improving. Along with this      provide the control systems that
airplanes epitomize the concept that        over great distances finally became a       comes the need to pre-think how            ensure that the design intent is
the devil is in the details because in      reality. Capable of gathering hundreds      subassemblies come together and            achieved.
small errors lies the potential for great   of points in hours, not days, laser         are joined. Today the focus on tooling
mischief such as increased drag and         trackers shouldered aside theodolites       is even greater than for any previous      When tool engineers lay out assembly
decreased range.                            and became the new portal to aircraft       generation of aircraft, for both metal     fixtures, they arrange them loosely,
                                            design, modeling, tool making,              and composite parts. For this industry,    and then adjust the location of
The trend is for smoother transitions       manufacturing, and quality checking,        tool making, machine tool calibration      individual details with a laser tracker
and, where possible, jointless              worldwide.                                  and monitoring is where a laser            until the whole conforms to the
design. Even the ubiquitous rivet is                                                    tracker has the greatest benefit.          CAD file.
disappearing, at least from exterior        Although laser trackers are used to
surfaces, replaced by composites            align large industrial equipment such       AEROSPACE TOOL                             An assembly tool contains the part
that flow uninterrupted from one            as metal rolling mills, printing presses,   The main structure of an aerospace         locating details that hold multiple
section to another. In the past, large      and power generation equipment, one         tool is its frame. The frame is a heavy-   components together so that they can
structures such as wings, fuselages,        can imagine that they were created          duty welded structure that is typically    be fastened to create the assembly.
or vertical stabilizers were difficult to   expressly for the aerospace industry.
make alike because there was no good        A laser tracker can be set up
way to measure them. The traditional        anywhere, in a design studio or
measuring standard for objects              factory, and its vast operating range
over 20 feet was the theodolite. But        is large enough to capture the wing         DUE TO ITS ENORMOUS RANGE, PRECISION,
theodolites were invented to measure        of the biggest planes ever conceived.       SPEED, AND COMMUNICATION CAPABILITY,
the altitude of weather balloons, not       Operation of the instrument is simple.
pinpoint the end of a forged spar, 50 or    The tracker mounts on a tripod and
                                                                                        THE LASER TRACKER GIVES AEROSPACE
100 feet distant. Although theodolite       emits a laser that is reflected off a       MANUFACTURERS THE ABILITY TO BE MORE
measurements can be fairly precise,         target positioned at the point to be        COST COMPETITIVE BY SHIFTING THE WHOLE
they are subject to interpretation and      measured. As the operator moves the
as such are not always reproducible.        target from point to point and the light
                                                                                        PROCESS OF DESIGN AND DEVELOPMENT INTO
Also, theodolites are slow, and using       is reflected back to the tracker, the       THE VIRTUAL REALM.
them can take several days to measure       distance to each point is calculated

6 | Issue 1 | 23 March 2011                                                                                                                              www.MWAsiamag.com
TECHNOLOGY

                                                                                        AIRCRAFT DESIGN IS INSEPARABLE FROM
                                                                                        TOOLING DESIGN, AND TODAY BOTH
                                                                                        DISCIPLINES FOLLOW PARALLEL PATHS OF
                                                                                        DEVELOPMENT.



                                                                                        that brackets on the tool mimic those      where the production parts will be
                                                                                        on the reference. Once setscrews on        interchangeable.
                                                                                        the brackets are locked, the tool is
                                                                                        ready to produce a first-article part.     Mold making remains something of
                                                                                                                                   an art, but digital metrology is turning
                                                                                        MODELING AND ANALYSIS                      it more in the direction of science,
                                                                                        Aircraft design is inseparable from        minimizing trial and error. When a
                                                                                        tooling design, and today both             toolmaker receives the model of the
                                                                                        disciplines follow parallel paths of       structure, such as a wing or tail part,
                                                                                        development. Once a design concept         they create a virtual tool that includes
                                                                                        is hardened, a laser tracker becomes       the molding surfaces. The art comes
                                                                                        involved in laying out physical models,    in knowing how to construct the
                                                                                        ensuring that both the parts and the       overall tool so that the mold surface is
Various assembly tools can serve             the measurements also confirm that         tooling conform to the virtual models.     supported rigidly and will not deflect
a range of functions. Typically, the         the drill bushings and complex shape       Modifications, such as a new wing-         under the weight of the mass of
first assembly tool is used to put the       guides for routing or trimming parts are   root profile, are analyzed by capturing    polymer.
major components together, while             in the correct location.                   the changes with the laser tracker,
subsequent tools locate frames,                                                         then feeding these back to a surfacing     Today, mold makers rely on Invar, an
stringers, and other support structures      After a tool is installed, the laser       program where it is reconstituted as       alloy with a very low coefficient of
for the part. The last tool positions the    tracker is used to measure all the         a new virtual model. Subsequently,         thermal expansion. Its thermal stability
skin onto the final assembly, and the        details and reference points to make       the modification can be checked for        makes it ideal for B-stage resins
skin is then fastened to the frame.          sure they are correctly placed, and to     structural analysis or by CFD for drag     that will be cured in an autoclave.
                                             establish a master reference system        and flow properties.                       The downside of Invar is that it is
When building a tool, a laser tracker is     for future maintenance and inspection                                                 expensive and difficult to machine,
first used to get the frame structure in     of the tool.                               The laser tracker has become critical      so it is important to avoid machining
place. It is then used to set the details,                                              to the development of molds and            mistakes. Molds are comprised of
making sure that the pins and pads are       TOOL SET-UP                                winding mandrels for composite parts       two regions, the solid surface that
all in the correct locations. The laser      Changing ambient temperature is            because some of these are huge,            is in contact with and shapes the
tracker also allows for measurement          another situation in which a laser         particularly those on military and         composite, and a support structure.
directly against a CAD file when setting     tracker simplifies tool setup. Every 5     business jets. For instance, the molded    Both are crafted from Invar. Absolute
complex-shaped details.                      seconds, the instrument samples the        wing skin for the F-35 is 50 feet long,    rigidity is essential.
                                             ambient temperature, pressure, and         and a molded stabilizer for a military
A fabrication tool has the same              humidity, automatically compensating       transport is 45 feet high. Even some       Once the mold surface is formed, the
locating details as an assembly tool,        for any environmental changes to           winding mandrels produce fuselage          support structure must be machined
but it adds details with drill bushings      ensure accurate results from the           parts that exceed 10 feet. Just as vital   so that the off-side of the mold surface
and other structures to allow for part       laser tracker. As the environment          as the instrument’s size capability is     perfectly “nests” in and is supported
fabrication. In addition to what a laser     changes, the tool will expand or           its accuracy. This becomes important       by the structure. Each vertical column
tracker measures on an assembly tool,        contract. Software allows the user
                                             to compensate for tool expansion/
                                             contraction based on the alloy or
                                             previously measured reference
                                             points that were obtained during the
                                             certification/qualification process.

                                             The job can then be scaled based
                                             on this data. Fixtures for riveted
                                               parts are set up similarly. Most
                                                 begin as a flat plate onto which
                                                 holding brackets are arranged
                                                 to fix the loose parts. When best
                                                  fit positions are determined on
                                                       a model reference tool, the
                                                               laser tracker becomes
                                                                 the tie between the
                                                                  reference and the
                                                                 working tool. With
                                                                the laser tracker,
                                                              engineers make sure

8 | Issue 1 | 23 March 2011                                                                                                                              www.MWAsiamag.com
                                                                                                                                     TECHNOLOGY
                                                                                          of points in the instrument’s computer,    adjustments that need to be made to
                                                                                          not just a single point. By covering the   the tooling show up instantly on the
                                                                                          region on the tool in a grid pattern,      instrument’s operating program.
                                                                                          the technician captures the shape
                                                                                          of its surface, as a 3-D point cloud.      Finally, tools change with use. Since
                                                                                          Comparing this to the surface CAD file     composites are highly abrasive, molds
                                                                                          instantly tells tool developers where      and mandrels wear with use. The
                                                                                          and how much the surface needs to be       laser tracker gives aircraft producers
                                                                                          modified. The latest trend in prototype    a simple, fast means for re-certifying
                                                                                          development is using a laser tracker       tooling to design specifications. For
                                                                                          to build directly to a CAD model,          example, a typical 50-pin tool can
                                                                                          eliminating the need for hard fixtures     usually be checked in as little as 10
                                                                                          that would only be used once or twice      minutes.
                                                                                          before being discarded. The laser
                                                                                          tracker, acting like a virtual gauge, is   No other instrument enables aircraft
                                                                                          used to build temporary or modular         builders the ability to get their arms
                                                                                          tools like giant erector sets that may     around the entire manufacturing
                                                                                          be reconfigured in minutes, saving         process – from design to final
in the support structure is like a            laser tracker can be used to position       hundreds of thousands of dollars in        dimensional checking. Due to its
bracket beneath the molding surface.          running modifications. By locating a        tooling costs for new programs.            enormous range, precision, speed, and
To get the nesting shape correct,             modification such as an extra support                                                  communication capability, the laser
toolmakers use a laser tracker to             bracket or hole with the laser tracker,     MANUFACTURING AND                          tracker gives aerospace manufacturers
measure cuts in the structure until the       engineers only have to do it once           CERTIFICATION                              the ability to be more cost competitive
nest exactly matches the underside of         because positioning is so precise.          Once tooling produces one-off parts        by shifting the whole process of
the mold.                                                                                 with satisfactory dimensions, the          design and development into the
                                              Surfaces of molds and winding               challenge is to see how it works in        virtual realm.
Few designs ever make it all the way to       mandrels are checked quickly with           production. The laser tracker simplifies
assembly untouched, but with a laser          a laser tracker. By sliding the target      this process. First article parts are
                                                                                                                                      Ken Steffey is director of product
tracker, modifications do not have            sphere over critical sections of the tool   measured with the instrument and
                                                                                                                                      management, Faro.
to slow down tool development; the            surface, a technician generates a line      compared to the design standard. Any




                                          Novec Engineered Fluids
                                                               TM




         Electronics Markets Materials Division

                         |




   www.MWAsiamag.com                                                                                                                              23 March 2011 | Issue 1 | 9
EXHIBITORS' HIGHLIGHTS
3M TECHNOLOGIES                                                                      ABRASIVE ENGINEERING
3M Novec Engineering Fluids for safe, effective and sustainable cleaning, coating,   Rosler EC Vibratory Machine: Rotary vibrators, type EC, are truly general purpose
lubricant deposition, thermal management and fire protection applications. All       machine. The relatively shallow incline of the process channel in the EC machines
Novec branded products offer low toxicity, zero ozone depletion potential, low       allows the processing and separation of small as well as large parts. EC machines
global warming potential and short atmospheric lifetimes.                            are also ideally suited for finishing of delicate parts.
Booth No. 3L1-08                                                                     Booth No. 3C4-03




                                                                                     BESTELL SOLUTION
                                                                                     BOA is an easy to setup, inexpensive and highly integrated smart vision system.
                                                                                     Its size is 44 x 44 x 39mm. Power up with multiple process engines (DSP, CPU
                                                                                     and FPGA). Embedded iNspect Express Software. BOA is widely used in multiple
                                                                                     industries including semiconductor, flat panel display, electronics, automotive,
FREEHANDS                                                                            medical, packaging and general manufacturing. Inspect Express 1700 adds new
FHS range of PVC enclosed conductor                                                  tools and improves performance of existing tools by as much as 10 times. This
busbar uses cost effective construction                                              version introduces optimized algorithms for 360 degree search, OCR and 2D matrix
primarily designed to deliver long                                                   reading.
trouble free services under the toughest                                             Booth No. 3G1-08
operating conditions. Top grade copper
strips supply power of 50A, 80A, 120A,
160A & 200A. Current collectors of
high capacity are readily available to
suit most common types of available
busbar housings. C-track feeds festoon
cable carriages system. This will
complete your needs for power supply
feeding lines in materials handlings.
Booth No. 4E4-06A




                                                                                     FARO SINGAPORE
                                                                                     Faro Laser Scanner Focus is a
ABB                                                                                  high-performance 3D laser scanner
RB 120 - for flexible and compact                                                    for detailed measurement and
production. ABB’s smallest ever                                                      documentation. The intuitive touch
multipurpose industrial robot weighing                                               screen control makes it as easy to
just 25kg and can handle a payload                                                   operate as a digital camera. It is
of 3kg (4kg for vertical wrist) with a                                               suitable for documentation of large
reach of 580mm. It provides an agile,                                                environments, quality control of
compact and lightweight solution with                                                components and reverse engineering.
superior control and path accuracy                                                   With its 976,000 measurement points/
while being a cost-effective and reliable                                            second, the Focus3D offers the most
choice for generating high production                                                efficient and precise method for
outputs in return for low investment.                                                measurement and 3D documentation.
Booth No. 3F1A-01                                                                    The Focus3D is entirely self-contained;
                                                                                     no additional devices, cables or laptop
                                                                                     is needed. With dimensions of 24 x
                                                                                     20 x 10cm and weighing 5kg, it is so
                                                                                     compact and mobile that users can
                                                                                     take it with them, wherever they go.
                                                                                     Booth No. 4A6-01

10 | Issue 1 | 23 March 2011                                                                                                                         www.MWAsiamag.com
                                                                                     ECO CNC




                   Haas
              IT’S SHOWTIME.
                          Join us at MTA 2011
                            • Singapore Expo •
      23 – 26 March (Wed – Sat) , 2011, Hall 3, Booth No. 3L4-01




CYCLE-TIME REDUCTION MACHINES
Typical Haas Ingenuity.
                                       Haas Factory Outlet – Singapore
                                       DKSH TECHNOLOGY I      34 Boon Leat Terrace, Singapore 119866
                                       Tel: +65 6471 8421 I www.HaasCNC.com
EXHIBITORS' HIGHLIGHTS
ENGINEERING SOURCE INTERNATIONAL                                                        TT TOOLING SYSTEMS
It was formed to provide full-service, close-tolerance machining of graphite products   Trioball: high feed rough ball. Features
and tooling components. Products and services that we offer to industrials: carbone     include effective three flute design
lorraine ellor EDM graphite, carbone/graphite products, diamond coated tools,           enables high feed machining to
carbide coated end mill and carbide coated inserts, EDM brass wire and precision        enhance productivity, unique double-
tooling system. Our business philosophy is to be a total solution provider offering     sided design with two cutting edges, a
a complete range of products and services like marketing, technical support and         highly stable cutting performance with
consultation, and most importantly customer care (pre and post).                        thick cutting edges, and excellent chip
Booth No. 3H5-03                                                                        evacuation with a coolant hole.
                                                                                        Booth No. 3D2-06




                                                                                        OPEN MIND
                                                                                        hyperMILL provides a broad
                                                                                        spectrum of machining strategies and
                                                                                        optimization functions that enable
                                                                                        flexible and efficient programming:
                                                                                        from 2D, 3D, HSC, 5 axis and mill/
                                                                                        turn strategies as well as special
                                                                                        applications for geometries such as
                                                                                        impellers, blisks, blades, tubes and
                                                                                        tyres. Complete machining with just
                                                                                        one CAM software on one uniform user
                                                                                        interface results in integrated processes
                                                                                        and minimised machining times and
                                                                                        increases reliability – for maximum
AIRVERCLEAN                                                                             process safety, cost efficiency and
The RydAir Industrial EAC is an                                                         quality.
air treatment system that removes                                                       Booth No. 4E2-03
airborne particulates from the indoor
environment. As the dirty air enters
the unit, the RydAir EAC ionizes and
collects the impurities (oil mist, smokes,
dirt, dust, etc) in the collection system.
The clean air can be re-circulated
back to the facility or exhausted out.
Applicable for CNC machines, central                                                    GP SYSTEM (SINGAPORE)
air conditioning and exhaust system.                                                    Röhm is a chucking tool manufacturer with a product range that goes from basic
Booth No. 3H4A-08                                                                       drill chucks to cutting edge custom-designed products for big name manufacturers.
                                                                                        The variety of sales program includes drill chucks, live centres, lathe chucks and
                                                                                        vices, gripping technology, power chucks, cylinders and mandrels, tool clamping
                                                                                        systems and a major potential of special designs. Röhm utilizes the most up-to-
                                                                                        date production equipment to manufacture and check products, and is capable to
INMAC EDM-TOOLS
                                                                                        tailor them to your specific requirements.
Inmac EDM-Tools was established in
                                                                                        Booth No. 3C2-01
2001. It is located in Selangor, Malaysia
and mainly manufactures EDM brass
wire. Our EDM-Tools wire conformed
to 100 percent quality check of final
product to all spools manufactured
from production. We are exporting 70
percent to 80 percent of our production
capacity to Europe, Thailand, Japan,
Canada, and USA. We are awarded
ISO 9002:2008 to ensure we meet
international quality wire standard.
Booth No. 3K1-08




12 | Issue 1 | 23 March 2011                                                                                                                            www.MWAsiamag.com
EXHIBITORS' HIGHLIGHTS
ENGINEERING SOURCE INTERNATIONAL                                                        TT TOOLING SYSTEMS
It was formed to provide full-service, close-tolerance machining of graphite products   Trioball: high feed rough ball. Features
and tooling components. Products and services that we offer to industrials: carbone     include effective three flute design
lorraine ellor EDM graphite, carbone/graphite products, diamond coated tools,           enables high feed machining to
carbide coated end mill and carbide coated inserts, EDM brass wire and precision        enhance productivity, unique double-
tooling system. Our business philosophy is to be a total solution provider offering     sided design with two cutting edges, a
a complete range of products and services like marketing, technical support and         highly stable cutting performance with
consultation, and most importantly customer care (pre and post).                        thick cutting edges, and excellent chip
Booth No. 3H5-03                                                                        evacuation with a coolant hole.
                                                                                        Booth No. 3D2-06




                                                                                        OPEN MIND
                                                                                        hyperMILL provides a broad
                                                                                        spectrum of machining strategies and
                                                                                        optimization functions that enable
                                                                                        flexible and efficient programming:
                                                                                        from 2D, 3D, HSC, 5 axis and mill/
                                                                                        turn strategies as well as special
                                                                                        applications for geometries such as
                                                                                        impellers, blisks, blades, tubes and
                                                                                        tyres. Complete machining with just
                                                                                        one CAM software on one uniform user
                                                                                        interface results in integrated processes
                                                                                        and minimised machining times and
                                                                                        increases reliability – for maximum
AIRVERCLEAN                                                                             process safety, cost efficiency and
The RydAir Industrial EAC is an                                                         quality.
air treatment system that removes                                                       Booth No. 4E2-03
airborne particulates from the indoor
environment. As the dirty air enters
the unit, the RydAir EAC ionizes and
collects the impurities (oil mist, smokes,
dirt, dust, etc) in the collection system.
The clean air can be re-circulated
back to the facility or exhausted out.
Applicable for CNC machines, central                                                    GP SYSTEM (SINGAPORE)
air conditioning and exhaust system.                                                    Röhm is a chucking tool manufacturer with a product range that goes from basic
Booth No. 3H4A-08                                                                       drill chucks to cutting edge custom-designed products for big name manufacturers.
                                                                                        The variety of sales program includes drill chucks, live centres, lathe chucks and
                                                                                        vices, gripping technology, power chucks, cylinders and mandrels, tool clamping
                                                                                        systems and a major potential of special designs. Röhm utilizes the most up-to-
                                                                                        date production equipment to manufacture and check products, and is capable to
INMAC EDM-TOOLS
                                                                                        tailor them to your specific requirements.
Inmac EDM-Tools was established in
                                                                                        Booth No. 3C2-01
2001. It is located in Selangor, Malaysia
and mainly manufactures EDM brass
wire. Our EDM-Tools wire conformed
to 100 percent quality check of final
product to all spools manufactured
from production. We are exporting 70
percent to 80 percent of our production
capacity to Europe, Thailand, Japan,
Canada, and USA. We are awarded
ISO 9002:2008 to ensure we meet
international quality wire standard.
Booth No. 3K1-08




12 | Issue 1 | 23 March 2011                                                                                                                            www.MWAsiamag.com
                                                                                                                                EXHIBITORS' LISTING

                                                   • S i ng ap ore E x p o | • 2 3 - 2 6 M a rch 2 0 1 1 | • w ww. mt a-as i a. c o m


  Company                             Booth No.        Company                             Booth No.     Company                            Booth No.      Company                                  Booth No.

3m Technologies (S) Pte Ltd               3l1-08     Century Spring Corp.                     3h5-04    Flexspeed Technology Pte Ltd             4c3-01   Infopages Media Sdn Bhd                      4d6-02
4t Technologies Pte Ltd                  3d4-06      Cerobear Gmbh                            4e4-03    Fong Lee Singapore Pte Ltd              4d4-01    Inmac Edm-Tools (M) Sdn Bhd                  3k1-08
Abb Pte. Ltd.                            3f1a-01     Chia Hiap Seng Hardware Co                3f2-08   Formach Asia Pte Ltd                    3d2-03    Innosol Awt Pte Ltd                          3h6-03
Abrasive Engineering Pte Ltd             3c4-03      Chu Weir Technology Co., Ltd.            3h3-05    Freeform Solution Pte Ltd                3c4-06   Intec Precision Equipment Pte Ltd            3c2-05
Advanced Edms Pte Ltd                    3e4-04      Coral Spa                                 3j3-04   Freehands Sdn Bhd                       4e4-06a   Isa Technology Pte Ltd                       3b2-08
Advanced Manufacturing Tools Pte Ltd     3k2-01      Czechinvest                              4c4-01    Gem                                      4f3-03   Island Optical Systems (S) Pte. Ltd.        3b5a-04
Advanced Technology                     3h4a-10      Czechtrade                               4c4-01    Global Business Gmbh                     4e4-09   Itw India Limited                            3h4-03
Enterprise Pte Ltd                                   Di Ku Diamond Enterprise Co., Ltd.       3h3-06    Gm Precision Tooling Pte Ltd             3e2-08   Jet Machinery Pte. Ltd.                      3b4-03
Agie Charmilles (South East Asia)        4a3-06      Diamond Carbide Industrial Products      3e4-05    Gmet International Pte Ltd              3g4-06    Jinn Fa Machine Industrial Co., Ltd.         3h3-01
Pte Ltd                                              Di-Soric Gmbh & Co. Kg                   4e4-10    Gmt Gummi-Metall-Technik Gmbh            4e3-01   Jsb Tech Pte Ltd                             3d3-03
Airverclean Pte Ltd                     3h4a-08      Dksh Technology Pte Ltd                   3l4-01   Gp System (Singapore) Pte Ltd            3c2-01   J-Tech Machinery Trading Pte Ltd             4d4-05
Alignment Tool (S) Pte Ltd              3h4a-01      Dmg/Mori Seiki                           4c2-01    Gravograph Singapore Pte Ltd             3f5-06   K2 Laser System                              3k6-02
Allianz Media (S) Pte Ltd                4e6-01      South East Asia Pte Ltd                            Gsa Technology Co., Ltd.                3h3-10    Käfer Messuhrenfabrik Gmbh & Co. Kg          4e4-02
Amada Singapore (1989) Pte Ltd           3d1-01      Dragon Instruments Co., Ltd.             3h4-08    Haimer Gmbh                              4e2-10   Keteca Singapore (Pte) Ltd                   3k1-02
Asia Masima Pte Ltd                      3b3-01      Dynacode Systems Pte Ltd                 3a2-05    Hankook Singapore Pte Ltd                4a5-01   Kimberly Clark Trading (M) Sdn Bhd           3h5-06
Asia Technic Pte Ltd                     3k1-03      Dyna-M Industrial Pte Ltd                3c3-05    Hans Laser Sdn Bhd                       3j3-05   Kobelco Machinery Asia Pte Ltd                4f4-01
Asphar Survey Pty Ltd                     3l1-03     Eastern Trade Media Pte Ltd              4e4-04    Hansan International Tungsten Pte Ltd   3d4-03    Komet Precision Tools India Pvt., Ltd.,      4d4-07
Attc (Asian) Pte Ltd                     3g1-01      Electro Motion Uk (Export) Ltd          3c5a-03    Haritha Media Pvt. Ltd.                 4d6-01    Kovoprojekta Brno, A.S.                      4c4-01
Autodesk Asia Pte Ltd                   3h4a-03      Emag Gruppen-Vertriebs-Und               3d2-05    Harting Singapore Pte Ltd                4f3-01   Kugler Gmbh                                  4e2-08
Awp Precision Engineering Pte Ltd        3d3-08      Service Gmbh                                       Heboe Maschinenfabrik Gmbh               4e2-01   Lap Laser Applications                       3a6-01
Bansbach Easylift Asia Pte Ltd           3g4-01      Engineering Computer                     3e2-01    Henko Machine Tools Pte Ltd              3j3-01   Asia Pacific Pte Ltd
Bao Nguyen Nhi Media Advertising         4e4-06      Services (S) Pte Ltd                               Hexagon Metrology                        3e3-01   Leifeld Metal Spinning Gmbh                  4e2-06
Trading Ltd                                          Engineering Industries Association       3c5-02    Asia Pacific Pte Ltd                              Lfc Pte Ltd                                   4f4-03
Bestell Solution Pte Ltd                 3g1-08      Engineering Source International Pte Ltd 3h5-03    Hi-Yew Laser Moulding Services          4d5-01    Linson Machine Tool Enterprise               3h1-05
Bevin Enterprise (S) Pte Ltd            3h4a-06      Engis Asia Pacific Pte Ltd               3h5-01    Hoffmann Gmbh Qualitätswerkzeuge         4e3-05   Long Shine Equipment &                       3h2-03
Bilz Vibration Technology Ag             4e2-05      Entrepot Marketing Pte Ltd               4a1-01    Hong Chek Co. Pte Ltd                    3c2-06   Supplies Pte Ltd
Blaser Swisslube (S) Pte Ltd             3k1-05      Erowa South East Asia Pte. Ltd.          3k1-06    Honsberg Metallsägen Gmbh                4e4-08   Machine Tool Accessories Pte Ltd            4e4-04a
Blum Production Metrology Pte Ltd        4a1-07      Eunion Singapore Pte Ltd                 3d6-03    Hsiu Fong Machinery (S) Pte Ltd         3h2-05    Machinery Market Ltd                        3c5a-02
Böhler International Gmbh                3h4-06      Eureka Tools Pte Ltd                     4d2-01    Hup Hong Machinery (S) Pte Ltd           3a2-02   Makino Asia Pte Ltd                          4a2-01
Bowers Metrology Uk Ltd                 3c5a-01      Faro Singapore Pte Ltd                   4a6-01    Hurco (S.E. Asia) Pte Ltd                4c1-05   Manufacturing Network Pte Ltd                3g4-03
Bruderer Presses (Far East) Pte Ltd      3h1-01      Fasten Enterprises (Pte) Ltd             4d5-06    Hwacheon Asia Pacific Pte Ltd            3k3-01   Marking Method Systems                       3b4-08
Bystronic Pte Ltd                        4b4-01      Federation Of Asian Die &                3b5-03    Ichi Seiki Pte Ltd                      4b3-01    Marposs Kabushiki Kaisha-                    3k4-05
C.E.I.A. S.P.A.                          3k6-01      Mould Associations                                 Idemitsu Lube (Singapore) Pte Ltd        4c1-01   Malaysia Branch Office
Cairnhill Metrology Pte Ltd              3b2-01      Fibro Asia Pte Ltd                       3g1-10    I-Motion Pte Ltd                         3k6-04   Mass Technologies Pte Ltd                     3j2-05
Caldron Hardware Enterprise              3a2-03      Filtermist International Limited         3h2-01    Impact Ireland Ni Ltd                    3c5-07   Mc-Cast Pte Ltd                              3a3-01
Carl Zeiss Pte. Ltd                      3g2-05      Fischer Instrumentation (S) Pte Ltd      3d4-05    Inco Engineering S.R.O.                  4c4-01   Metalis Pte Ltd                              3g1-05




    www.MWAsiamag.com                                                                                                                                                       23 March 2011 | Issue 1 | 13
EXHIBITORS' LISTING
  Company                              Booth No.     Company                              Booth No.

Micro-Tech Supplies &                     3d6-01    Strojimport                                4c4-01
                                                                                                           INTERNATIONAL CONFERENCE ON
Services Pte Ltd
Mikrotools Pte Ltd                        4c1-03
                                                    Strojírny Tyc
                                                    Strojosvit, A.S
                                                                                               4c4-01
                                                                                               4c4-01
                                                                                                         OPTICS IN PRECISION ENGINEERING &
Mitutoyo Asia Pacific Pte Ltd             3g3-01    Stroza                                     4c4-01    NANOTECHNOLOGY (            2011)
Mpo Cr                                    4c4-01    Struers A/S                                3f2-01
Msr Pte Ltd                               3e4-01    Success Electronics &                      3d3-01
Mst Corporation                           4b1-01    Transformer Manufacturer Sdn. Bhd                    DAY 1                                           DAY 2
Muller Machines Sa                        3m1-03    Sumi-Carbide Tooling Systems Pte Ltd       3c3-01    (Wednesday, 23 March 2011)                      (Thursday, 24 March 2011)
Munger Machine Tool Pte Ltd               4a3-01    Sumitomo Precision Machine Tools           3j2-01
Nanotec Asia Pacific Llp                  3b4-01    Sun Yuan Technology Inc.                   3h3-04   11:00am     Keynote 1                           9:00am    Oral Presentation
                                                                                                                    Measurements and Standards                    Optical Metrology &
Nanyang Instrument &                      3a2-01    Sunny Instruments Singapore Pte Ltd        3b3-06
                                                                                                                    for Optical Surfaces                          Instrumentation II
Machinery Pte. Ltd.                                 Super Abrasives Engineering Pte Ltd        3l5-01               Dr. T. Vorburger, NIST, USA                   Optical Systems Design I
Nct Technologies Sdn Bhd                  3k1-01    Sutton Tools Singapore Pte Ltd             4f3-05
                                                                                                        11:45am     Keynote 2                           10:30am   Tea Break & Poster Session
Newera Tools & Machinery (S) Pte Ltd      3h4-01    Synergyx Technology Pte Ltd                4d3-05
                                                                                                                    Dimensional Metrology at PTB                  Computational Optics
Newserv Machinery                         3k6-03    Syntec Machinery Co., Ltd.                 3h3-08               to Support Optical Fabrications
Nikken Kosakusho Asia Pte. Ltd.           4d2-05    System 3r Far East Pte Ltd                3m1-07                Dr. Gaoliang Dai, PTB, Germany      11:00am   Oral Presentation
Nikon Singapore Pte Ltd                    3f3-01   T & T Industries Pte Ltd                   3f5-03                                                             Special Session (invited papers):
                                                                                                        12.30pm     Lunch & Poster Session                        Computational Optics II -
Numill Ltd                               3c5a-05    Taiwan Machine Tool & Accessory            3h3-07               Nanoscale Optics and Metrology                Profilometry and hardware
Ohta Precision (M) Sdn. Bhd.              3h4-05    Builders' Association (Tmba)                                    Optical Metrology &                           Fiber Optics Sensors I
Olympus Singapore Pte Ltd                 3c4-05    Tapmatic (Sea) Industries Pte Ltd          3k4-01               Instrumentation
Open Mind Technologies Ag                 4e2-03    Tbt Tiefbohrtechnik Gmbh + Co.             4e3-10                                                   12.30pm   Lunch & Poster Session
                                                                                                        1:30pm      Oral Presentation                             Diffractive Optical Element
Optical Gaging (S) Pte Ltd         3f2-10/ 3m1-01   Techtown Pte Ltd                           3a3-05               Optical Metrology &
Optics & Photonics                        3c5-03    Ten Alps Communications Asia               4d5-04               Instrumentation I                   1:30pm    Oral Presentation
Society Of Singapore                                Thai Trade And Industry Media Co., Ltd.    4d5-03               Precision Measurement &                       Optical Metrology &
                                                                                                                    Image Processing I                            Instrumentation III
Perfection Machinery Sales Inc            3c5-04    Thor International Company                 3g4-08
                                                                                                                                                                  Sensors & Actuators,
Pioneer Machine Tools, Inc.               3e4-07    Tochigiya Co., Ltd.                        3e4-09   3:30pm      Tea Break & Poster Session                    Fiber Optics Sensors II
Preactor International Ltd                3c5-01    Tornos Technologies Asia Limited           4a3-02               Precision Measurement &
                                                                                                                    Image Processing                    3:30pm    Tea Break & Poster Session
Precise Tooling System                    3b4-10    (Malaysia Rep. Office)
                                                                                                                    Sub-Surface Metrology                         Optical Systems Design
Procut Precision (S) Pte Ltd              3d3-05    Tos Varnsdorf                              4c4-01
Production Link Pte Ltd                   3c3-06    Tosyo Precision Sdn Bhd                   3m1-04    4.00pm      Oral Presentation                   4:00pm    Oral Presentation
Promedia Directories Pte Ltd              4a6-04    Toyomi (M) Sdn Bhd                         3g2-10               Special Session (invited papers):             Special Session (invited papers):
                                                                                                                    Computational Optics I - State-               Computational Optics III - Digital
Pt. Uni-Metaltech Industry                3a6-03    Trg Asia Pte Ltd                           3d4-01
                                                                                                                    of-the-art Methodologies                      Holography and Temporal
Regional Tech Pte Ltd                     3e2-03    Trsystems Gmbh                             3a6-02
                                                                                                                    Precision Measurement &                       Analysis Optical Fabrication,
Renishaw (Singapore) Pte Ltd              3e2-05    Trumpf Pte Ltd                             4e4-01               Image Processing II                           Surface Metrology
Ringier Trade Media Ltd                   4e6-02    Trustech Tools & Machinery                 3h2-08
Riso Seiki (S) Pte Ltd                    3c4-12    Tt Tooling Systems                         3d2-06
S I Engineering Pte Ltd                   3c4-01    Tussor Machine Tools India Pvt Ltd         3l1-01
Saeilo Technologies Pte Ltd               3k4-06    Tyt Corporation Pte Ltd                    3b3-05
Scp Automation (M) Sdn Bhd                4d4-06    Uk Trade And Investment                    3c5-05                             MTA2011 EVENTS
Seacad Technologies Pte Ltd                3f5-01   Ultra Saws (S.E.A.) Pte Ltd               3h4a-05
Shanghai Tong Lee Hardware Pte Ltd         4f2-05   Ultratex (S) Pte. Ltd                      3b3-03   MTA2011 OPENING                                 THE FEDERATION
Shanghai Troop Electronics                 3f1-01   Unic Precision Die Casting                 4f2-03   CEREMONY                                        OF ASIAN DIE AND
Equipment Co Ltd                                    Manufacture Sdn Bhd                                 23 March 2011 Wednesday                         MOULD ASSOCIATIONS
Shonan Design (S) Pte Ltd                 3a6-04    Unior Singapore Pte Ltd                    3b4-05   9.30am – 11.00am                                (FADMA) AGM
                                                                                                        Foyer 1, Level 2
Sin Chew Woodpaq Pte Ltd                  3b5-04    Vf Fastening Systems Pte Ltd               3g4-05                                                   24 March 2011 Thursday
                                                                                                        Guest of Honour: Mr S Iswaran
Sin Ghee Huat Corporation Ltd             3e4-06    Vitrochem Technology Pte Ltd               3j3-07   Senior Minister of State for Trade & Industry   9.00am – 5.00pm
                                                                                                        and Education                                   Foyer 1, Level 2 Meeting Room 8
Singapore Polytechnic                     3b6-05    Wavelab Scientific Pte Ltd                3b5a-06
                                                                                                                                                        (For members only)
Singapore Precision Engineering           3b3-08    Wenzel Asia Pacific Pte Ltd                3f2-05
And Tooling Association                             Wikov                                      4c4-01
                                                                                                        MTA2011 INDUSTRY
Singapore Test Services Pte Ltd           3b2-03    Wing Poh Hardware Pte Ltd                  3h6-01                                                   SINGAPORE PRECISION
                                                                                                        NIGHT
Singapore Tourism Board                    4f4-05   Witte Far East Pte Ltd                     3g2-01                                                   ENGINEERING &
                                                                                                        23 March 2011 Wednesday                         TOOLING ASSOCIATION
Sino Tooling System                       3d2-01    Wt Precision Equipment Pte.Ltd.           3b5a-03
                                                                                                        6.00pm – 8.00pm
Sintec Optronics Pte Ltd                 3b5a-01    Xerom Singapore Pte Ltd                    3b6-03   Foyer 1, Level 2                                (SPETA) AGM
Sm Component                              3a3-03    Xmicro Solution Pte. Ltd.                  3f2-03   (Opened to MTA2011 exhibitors and               25 March 2011 Friday
                                                                                                        partners)                                       3.30pm – 5.30pm
Smg Technologies Pte Ltd                  4d3-01    Yamaris Machinery Pte Ltd                  3j4-01
                                                                                                                                                        Conference Hall F (For members only)
Sms Machinery (S) Pte Ltd                 3b5-01    Yamazen (Singapore) Pte Ltd                4b2-01
Sodick Singapore Pte Ltd                  4d1-01    Ycl Precision Engineering Sdn Bhd          4c1-08   SEMINAR ON
Solution Plastics Pte Ltd                 3d4-08    Yg-1 Tools Asia Pte Ltd                    3b2-06   LED TRENDS &                                    MTA2011
Soukromá Energetická                      4c4-01    Yip Fung Trading Company                   4f2-01   MANUFACTURING                                   NETWORKING TEA
Spire Pte Ltd                             3c4-08    Young Star Media -                         4e4-05   TECHNOLOGIES                                    RECEPTION
Sst                                       4c4-01    Advertising Company Limited
                                                                                                        Organised by Bruderer Presses (FE) & GF         25 March 2011 Friday
St Machinery Pte Ltd                       3l1-05   Zacobria Pte. Ltd.                         3d6-02   AgieCharmilles (SEA)                            3.30pm – 5.30pm
Stamford Precision Tools Pte Ltd          3b2-05    Zephyr, S.R.O.                             4c4-01   24 March 2011 Thursday                          Manufacturing Theatre, Hall 3
                                                                                                        8.50am – 5.40pm
Starcolor Technology Pte Ltd              3h6-05    Zeveta Bojkovice                           4c4-01   Conference Hall A & B
Steel & Metallurgy                        4a6-05                                                        (Registration at event)
Steelex International Ltd                3c5a-04    Updated as of 17 March 2011


14 | Issue 1 | 23 March 2011                                                                                                                                                    www.MWAsiamag.com
                                                                                                                                                                             PROGRAM

  DAY 3 (Friday, 25 March 2011)

PLENARY | CONFERENCE HALL K                    1.30 pm   The Applications of Multiphase             4.30 pm      Panel Discussion: Opportunities                               Akihito Tajiri, Leader, Corporate
                                                         Pumps in the Oil & Gas Industry                         for the PE Industry in the Oil &                              Planning, Kurashiki Boring Kiko
10.00am Opening Remarks by                               Dr Loh Wai Lam, Associate                               Gas Sector                                                    Co., Ltd
        Chairperson                                      Professor, National University of                       Moderator: Dr Lim Beng Siong,
        Dr John Yong, Director, SIMTech                  Singapore                                               SIMTech                                          2.00 pm      Developments and Applications
                                                                                                                 Panelists:                                                    of Advanced Thermal Spray
10.10 am Growing the Precision                 2.00 pm   Drilling System Performance                             Dr Pugalenthi Pandian,                                        Technologies
         Engineering Industry                            Maximization: Trends and                                Manufacturing Center Manager –                                Stephen Booth, Managing
         Dr John Yong, Director, SIMTech                 Developments                                            CPU, Schlumberger                                             Director, Flame Spray
                                                         Asbjorn Mortensen, Senior                               Dr Loh Wai Lam, Associate                                     Technologies
10.45 am Today and Tomorrow of MEMS                      Programme Manager, Drilling                             Professor, National University of
         Dr Han Jiang Bo, Senior Director,               Group, Keppel Offshore & Marine                         Singapore                                        2.30pm       Afternoon Tea Break
         EPCOS                                           Technology Center Pte Ltd                               Phil Medway, Technical Director,
                                                                                                                 Corrocoat Singapore                              3.00 pm      Surface Coatings and Direct
11.15 am Sustainable Manufacturing –           2.30 pm   Afternoon Tea Break                                     Cephas Ng, Senior Manager,                                    Fabrication for Medical Devices
         It is More Than Just Green                                                                              ST Kinetics Integrated Engineering                            Stefan Gulizia, Research
         Dr Song Bin, Director,                3.00 pm   An Oil & Gas Industry                                   Pte Ltd                                                       Scientist, CSIRO Materials
         Sustainable Manufacturing                       Perspective: Innovative in                                                                                            Science & Engineering
         Center, SIMTech                                 Pump Efficiency Coating and                5.15 pm      End of Conference
                                                         Monitoring                                                                                               3.45 pm      Panel Discussion:
11.45 am Exhibition Viewing                              Phil Medway, Technical Director,                                                                                      Opportunities for the Surface
                                                         Corrocoat Singapore                        SURFACE | CONFERENCE HALL J                                                Finishing Industry in the New
                                                                                                    FINISHING                                                                  Manufacturing Economy
OIL & GAS | CONFERENCE HALL K
                                               3.30 pm   Value Engineering through Metal                                                                                       Moderator: Mr Peter Collier,
Chairperson: Dr Lim Beng Siong, SIMTech                  Injection Molding                          Chairperson: Mr Peter Collier, SIMTech                                     SIMTech
1.00 pm Business Opportunities and                       Akhiljit Wangkheimayum, Senior             1.00 pm Surface Modification: Trends and                                   Panelists:
          Technical Challenges of the Oil                Engineer, Indo-US MIM Tec Pvt Ltd                    Challenges                                                       Stephen Booth, Managing
          & Gas Industry in Asia                                                                              Dr David Low, Head, Process                                      Director, Flame Spray
          Ng Bok Chwee, Production             4.00 pm   Case Study of a Supplier:                            Technology Research Centre                                       Technologies
          Manager – Down Hole                            Meeting Unique Machining                             (PTRC), Advanced Technology                                      Stefan Gulizia, Research
          Equipment, Schlumberger                        Needs of the Energy Industry                         Center, Rolls-Royce                                              Scientist, CSIRO Materials
          Dr Pugalenthi Pandian,                         Cephas Ng, Senior Manager,                                                                                            Science & Engineering
          Manufacturing Center Manager –                 ST Kinetics Integrated Engineering         1.30 pm      Plasma Electrolytic Oxidation:
          CPU, Schlumberger                              Pte Ltd                                                 Protective Coating of Light Alloys               4.30 pm      End of Conference


                                                                                  * Programme is correct as at press time. The Organiser reserves the right to amend the programme as deemed necessary without prior notice.




                                                FHS
                                                Busbar, C-Track
                                                                           Visit us at MTA 2011 booth No: 4E4-06A
                                                                           Enquiry:
                                               Current Collectors          fhs.sales@gmail.com, Fax: ++603 9058 8262


                                  FHS range of PVC ENCLOSED CONDUCTOR Busbar uses cost effective construction
                                primarily designed to deliver long trouble free services under tough operating conditions.
                                    Top grade copper strips supply power of 50A, 60A, 80A, 90A, 100A, 120A & 160A.

                                             CURRENT COLLECTORS of high capacity are readily available to suit most
                                                        common types of available busbar housings.

                                                 C-TRACK feeds cable carriages system. This will complete your
                                                   needs for power supply feeding lines in Materials Handlings.




 www.MWAsiamag.com                                                                                                                                                                  23 March 2011 | Issue 1 | 15

				
DOCUMENT INFO
Shared By:
Tags: hypermill
Stats:
views:74
posted:3/29/2011
language:English
pages:17