multi_veneer v5.indd by suchenfz


									                      The Complete Edging Solution

                      Multi Veneer - MR
Multi Veneer - MR

A multi-layered edging made in continuous rolls from          edgebanders (for preglued stock), or by hand using
natural and reconstituted timber veneers. Multi Veneer        contact adhesives.
edging is suitable for all edging applications including      Most edgebanders’ trimming devices will cut Multi Veneer
doors, drawer fronts, cabinet ends, desk tops and             cleanly without difficulty.
bench tops.
                                                              Multi Veneer can also be trimmed easily using a router.
Consolidated Veneers Multi Veneer MR (Moisture Resistant)
                                                              For best results when applying unglued Multi Veneer,
2mm timber edging is produced using Poly Urethane
                                                              we recommend EDGEBOND granulated and cartridge
Reactive (PUR) adhesives to bond each layer together.
                                                              hotmelts, available ex-stock from Consolidated Veneers.
Benefits of using 2mm Multi Veneer edging bonded with
PUR are:
Excellent Moisture Resistance (MR):
No water penetration into the boundary layer                  Multi Veneer edging is available ex-stock from
                                                              Consolidated Veneers or from one of our distributors
Superior Bond Strength and Heat Resistance:                   in a range of sizes listed below:
Due to the chemical cross-linking reaction
Excellent Resistance to various solvents:
Due to the chemical cross-linking reaction                    Standard widths:              22mm, 29mm, 38mm
Excellent water and steam resistance:                         Roll sizes:                   100m & random length
Due to the chemical cross-linking reaction                    Standard thickness:           2mm

Advantages                                                    Range of species includes:
Continuous roll form – optimizes edgebanding speed whilst     American Cherry               New Guinea Walnut
minimizing offcuts and wastage as experienced with short
                                                              American Oak                  Pine
veneer strips.
                                                              American Walnut               Rock Maple
Pre-primed – ready for edgebanding, no more priming of
those solid timber strips.                                    Anegre                        Sapele
Face Sanded – ready for lacquering after edgebanding.         Beech                         Spotted Gum
Attractive appearance – uniform colour with near              Brushbox                      Tasmanian Blackwood
invisible joins.                                              Jarrah                        Tasmanian Myrtle
Reduced waste – no more offcuts or blemishes as with solid    Koto Ash                      Tasmanian Oak
timber strips.                                                Makore                        Victorian Ash
Original natural veneers – Consolidated Veneers’ range        Multiplex                     Wenge
of Australian species is produced using locally sourced
face material, ensuring “True Australian Species” – no
Comprehensive range - 20 species in stock.                    Please note other Non-Standard species are available upon
                                                              request, minimum quantities will apply. For all enquiries please
Ease of application – suitable for use on most edgebanders.   contact our sales office.

Application                                                   Please contact Consolidated Veneers or visit the
Multi Veneer can be applied using a wide selection            Consolidated Veneers web site for further information
of equipment including hotmelt edgebanders, hot air           and details of our distributor network Australia wide.

The Complete Edging Solution

Consolidated Veneers
Building 3, 19 Pine Rd, Fairfield NSW 2165
Phone 02 9681 3822 | Fax 02 9681 1730

To top