4041 Peugeot Expert_ Fiat Scudo_ Citroen Despatch A 1 Crossmember by nyut545e2

VIEWS: 41 PAGES: 1

									                                              ANKER TOWBARS LIMITED
                                                  THE ORIGINAL TOWBAR COMPANY
                                                             Appleby Hill
                                                                Austrey
                                                             Warwickshire
                                                               CV9 3ER
                                                       Tel: +44(0) 1827 830039
                                                       Fax: +44(0) 1827 830862
                                                    Email:sales@ankertowbars.com
                                                 FITTING INSTRUCTION
                                                     Before fitting please read notes
                                                                on reverse


                                      4041 Citroen Dispatch '07 - , Fiat Scudo Van '07 -
                                                Peugeot Expert Van '07 -

                IN THE BOX                                                              IN THE FITTING KIT CONT
A         1     Cross member                                           E        2       M12x100 Bolts, Nuts & Washers
B         2     Handed Side Plates                                     F        2       M12x30 Bolts, Nuts & Washers
                IN THE FITTING KIT                                     G        4       M12x35 Bolts & Spring Washers
C         2     Spacer Tubes 68mm                                      H        2       M12 Cage Nuts
D         2     M16x50 Bolts, Nuts & Washers                           I        6       M12x25 Washers

1. Locate forward mountings and insert H. Bolt B to H using G and I, and to the sides of the chassis using E with C and I.
2. Bolt A to B using F and G/I. Fully tighten.
3. Finally using D fit ball and wiring kit (not supplied with this kit). Fully tighten.

This towbar must be used with a type approved ball conforming in A-50-1 dimension with adequate D & S values.
We hope that you have found this bar easy to fit and that you will enjoy towing with the strength of an Anker Towbar behind you.

								
To top