Docstoc

SHENYANG MACHINE TOOL GROUP CO LTD Add No Kaifa

Document Sample
SHENYANG MACHINE TOOL GROUP CO LTD Add No Kaifa Powered By Docstoc
					                                                                                                                                                                                            GMB


                                                                                                     Design and specifications are subjected to change without notice. 20090309-FT09-0026
Asia & Pacific Dept.               Europe Dept.                     Middle East Dept.
Tel: +86-24-25191509               Tel: +86-24-25191518             Tel: +86-24-25191511
Fax: +86-24-25876317               Fax: +86-24-25876317             Fax: +86-24-25876320
E-mail: peng_wang@smtcl.com        E-mail: feng_li@smtcl.com        E-mail: chaowei_shen@smtcl.com

America Dept.                      Service Dept.                    SMTCL Canada, INC.
Tel: +86-24-25191526               Tel: +86-24-25191552             Tel: +1-416-740-1051
Fax: +86-24-25876320               Fax: +86-24-25876317             Fax: +1-416-740-9303
E-mail: yan_gao@smtcl.com          E-mail: yantao_wang@smtcl.com    E-mail: nayongyan@hotmail.com

SMTCL Schiess                      SMTCL Vietnam Office             SMTCL Turkey, INC.
Tel: +49-3473968359                Tel: +84-04-6402719              Tel: +90-212-4650989
Fax: +49-3473968121                Fax: +84-04-6405344              Fax: +90-212-4650993
E-mail: jinsong_dong@smtcl.com     E-mail: peng_wang@smtcl.com      E-mail: chaowei_shen@smtcl.com


                             SHENYANG MACHINE TOOL (GROUP) CO., LTD.
       Add: No.1, 17 A, Kaifa Road, Shenyang Economic & Technological http://www.smtcl.com
                    After-sales Service Dept.: +86-24-25191552 Post Code: 110142
GMB series


All GMB series machines are equipped with two speed ZF gear
boxes, built in Germany, powering high rigidity spindle units, which
allow both high torque, low speed rough machining and high speed
precision machining.


The gantry structure is designed with a large cross section area,
which in combination with stepped design of the guide ways, greatly
increases stability during heavy cutting operations.


The machines can be equipped with a wide range of optional
accessories, such as a heavy-duty milling head to allow five-face
machining.

                                                                       1
       GMB GANTRY                                                                                                                      Machining Center CNC Boring & Milling Machine

       Main features                                                                                                                      High cost performance


    The headstock is equipped with double
    hydraulic balancing mechanism to afford
    steady movement of headstock.



                                                                                                                                                                         The main motion of the machine adopts AC main servomotor
                                                                                                                                                                         with wide speed changing and ZF gearbox to afford the
                                                                                                                                                                         spindle with large torsion output in low speed suit for heavy
                                                                                                                                                                         cutting, and constant power in high-speed suit for finish
                                                                                                                                                                         machining.




       The design of large section area of beam and step
       construction guide-ways shorten the distance from
       spindle center line to lower guide-ways and increase
       bend strength as well as torsion strength of beam,
       benefit for steady cutting.

                                                                                                                                                                         The spindle is supported by special bearings used for precision
                                                                                                                                                                         machine spindle to obtain good capability both for spindle
                                                                                                                                                                         stiffness and for rotary accuracy. It uses oil cooler (cycle system)
                                                                                                                                                                         to cool the spindle unit, as a result, temperature rising of
                                                                                                                                                                         spindle unit has been controlled effectively.

                    The bed, column, beam, slide and spindle box of the machine are adopted
                    cast iron formed from resin bonded sand model and reasonable layout of
                    ribs to provide good stiffness and steadiness.




                                                                                          The worktable of the machine has good
                                                                                          positioning accuracy and stationary
                                                                                          response characteristic owing to
                                                                                          optimizing designation and equipment
                                                                                          of AC servomotor with large inertia for                                        The machine is provided with two kinds of spindle for
                                                                                          driving, ball screws with high quality and                                     choosing, one is short type, suitable for general cutting and
                                                                                          linear guide-ways with heavy load.                                             another is long type, most suitable for machining deep cavity,
                                                                                                                                                                         such as mould etc.



2                                                                                                                                                                                                                                               3
    Application scope                                                                   CNC System
                                                                                        • The electric system designed by advanced design concept and technology provides the whole machine with relable
                                                                                          capability, convenient operation, freely control by wide application of modern design method such as CAD and theory of
                                                                                          person-computer engineering science.
                                                                                        • The machine is equipped with Germany SIEMENS 802D CNC system, 10.4" colorful LCD and digital AC servo system.
                                                                                        • The electric system of the machine has integrated person-computer safety protection measurement and provides optimum
                                                                                          protection for operator and machine.
                                                                                        • The important electric elements of the machine is purchased from famous company, and the others adopt famous domestic
                                                                                          brand products or the products made by joint-stock company to secure the machine to run for long term without
                                                                                          malfunction.
                                                                                        • Humanism design control station, flexible and convenient.
                                                                                        • Integration control panel of SIEMENS MCP has less wire connection which helps to decreases machine failure rate.
                                                                                        • Equipped with imported small type handle pulse convenient for tool setting.
    Three-dimension curved surface machining   Two-dimension curved surface machining
                                                                                        • Equipped with triple color alarming lamp, convenient for effective monitor of machine.
                                                                                        • On line machining function (DNC) based on general RS232C interface.




    Surface milling                            Boring
                                                                                        USB interface                                     Helix interpolation




    Five-face machining                        Fourth axis machining                    On line machining process                         Specialization wiring technology




4                                                                                                                                                                                                                  5
                                                                                                                                                              Standard accessories
    Standard accessories                               Optional accessories
    • Spindle external encoder locating system         • Tool magazine
      (not available for GMB10 series)                 • Angular head
    • Rigid taping                                     • Raster check feedback for three axes
    • Three axes encoder feedback system               • Raster check feedback for two axes
    • Handle pulser                                    • Z-axis travel 1250mm
    • Footswitch for tool                              • Spindle inner cooling and high
                                                                                                                                                                   Handle pulser                        Squirt gun for              Footswitch for tool clamping/unclamping
      clamping/unclamping                                pressure water pump
                                                                                                                                                                                                        removing chips
    • Working area lamp and alarm lamp                 • Long nose type spindle (22kW, 770N.m)
    • Machine CNC cabinet with dust-proof,                                                                 Chain tool magazine (Optional accessories)
      dehumidify air conditioner (cooling machine)
    • Spindle infinitely variable speeds
      gearbox with two steps 6000rpm
      (not available for GMB10 series)
    • Function for blowing air to spindle taper hole
    • Headstock balancing mechanism
      (not available for GMB10 series)
    • Oil cooler (for cooling of spindle unit and
                                                                                                                                  RENISHAW RMP60
       gearbox)
                                                                                                                                  (Optional accessories)
    • Telescopic cover of X, Y-axis                                                                                                                              Pneumatic component                          ZF gearbox                              CNC system
                                                                            FANUC system
    • Machine semi protection cover
                                                                            (Optional accessories)
    • Auto lubrication system
    • Cooling water (cycle) system
    • Squirt gun for removing chips
    • Double helix chip conveyer
    • Chain type chip conveyer and
      chips car



    Main outsourcing                                   Optional outsourcing
    • Spindle group: Taiwan China                      • CNC system: FANUC system Japan                                                                                      Chain type chip conveyor                      Helix chip conveyer           Hydraulic station
    • Bearing for ball screws: NSK Japan               • High pressure pump: ARyung Korea
    • Pneumatic component: SMC Japan                   • Scales: HEIDENHAIN Germany
    • Linear guide-ways: THK Japan or                  • Tool magazine: Jifu Taiwan              Spindle inner cooling and high pressure water pump
      Shangyin Taiwan                                  • Renishaw: RMP60                         (Optional accessories)
    • Ball screws: THK or SHUTON spain
      Shangyin Taiwan (GMB10/12 Series)
    • Oil cooler: Taiwan China
    • ZF gearbox: ZF company Germany
    • CNC system: SIEMENS Germany
    • Main hydraulic component:                                                                                                                                         Electro-control
      Rexroth Germany DAIKIN Japan                                                                                                                                      cabinet air                                                                           Lubrication
                                                                                                                                                                        conditioner                       Oil cooler                                          system
    Note: The above components will be changed with continuous technology development.                                        Scales (Optional accessories)




6                                                                                                                                                                                                                                                                             7
    Taiwannese Gong Yang Angular Head                                                            Main Technical Specifications

                                                                                                 Overall Dimensions




    90° Right angle milling head:                  90° Universal milling head:
    N75ST-01 (optional for GMB 10/12 series)       C45-TL03 (optional for GMB 10/12 series)
    N75ST-02 (optional for GMB 16/20/25 series)    C50-TL02 (optional for GMB 16/20/25 series)
    Power: 11kW                                    Power: 11kW (C45-TL03)/15kW (C50-TL02)
    Speed: 2000rpm (Forward rotation)              Speed: 1200rpm (Reverse rotation)
    Max. tool diameter: ∅150                       Max. tool diameter: ∅200
    Spindle taper (7:24): BT50                     Spindle taper (7:24): BT50
    Connects with spindle manually                 Connects with spindle manually
    Manual feed index                              Manual feed index
    Manual tool clamping/unclamping                Manual tool clamping/unclamping




                                                                                                  Model      A        B      C      D      E     F      A1      B1      C1     D1     E1

                                                                                                  GMB1016    2010     4100   2320   1000   800   600    5500    3500    1600   1600   600

                                                                                                  GMB1020    2010     4100   2320   1000   800   600    6300    4300    2000   2000   600

                                                                                                  GMB1225    2330     4100   2580   1250   800   750    7500    5250    2500   2500   750

                                                                                                  GMB1230    2330     4100   2580   1250   800   750    8300    6250    3000   3000   750

                                                                                                  GMB1620    3300     5120   4200   2300   880   1000   6530    4830    2000   2200   800
    90° Deep-boring milling head:                  Extended head: E75N-A03                        GMB1630    3300     5120   4200   2300   880   1000   8300    6850    3000   3200   800
    A74-TL-02 (optional for GMB 16/20/25 series)   (optional for GMB 16/20/25 series)
                                                                                                  GMB1640    3300     5120   4200   2300   880   1000   10080   8830    4000   4200   800
    Power: 11kW                                    Power: 15kW
                                                                                                  GMB2030    3700     5120   4200   2700   880   1000   8300    6850    3000   3200   800
    Speed: 800rpm (Reverse rotation)               Speed: 2000rpm (Reverse rotation)
    Max. tool diameter: ∅200                       Max. tool diameter: ∅150                       GMB2040    3700     5120   4200   2700   880   1000   10180   8830    4000   4200   800
    Spindle taper (7:24): BT50                     Spindle taper (7:24): BT50                     GMB2540    4570     5120   5370   3200   935   1000   10180   8830    4000   4200   900
    Connects with spindle manually                 Connects with spindle manually
    Manual feed index                              Manual feed index                              GMB2550    4570     5120   5370   3200   935   1000   12320   10830   5000   5200   900

    Manual tool clamping/unclamping                Manual tool clamping/unclamping                GMB2560    4570     5120   5370   3200   935   1000   14480   12830   6000   6200   900




8                                                                                                                                                                                           9
     Main Technical Specifications
                                                                             Model          A2         B2         C2      D2       E2       Model                                            Units   GMB1016                     GMB1020                     GMB1225                     GMB1230

                                                                             GMB1016        4050       5050       2390    2390     2200                     Worktable size                   mm      1000×1600                   1000×2000                   1250×2500                   1250×3000
                                                                             GMB1020        4050       5850       2790    2790     2200                     Distance between two columns mm          1250                        1250                        1450                        1450
                                                                             GMB1225        4400       6850       3290    3290     2200     Worktable Max. load capacity                     kg      3000                        3500                        5000                        6000
                                                                             GMB1230        4400       7850       3790    3790     2200                     T-slot                           mm×N    22×7                        22×7                        22×7                        22×7
                                                                             GMB1620        5200       6730       3270    3260     2500                     Worktable travel (X-axis)        mm      1600                        2000                        2500                        3000
                                                                             GMB1630        5200       8700       4200    4200     2500                     Saddle travel (Y-axis)           mm      1000                        1000                        1250                        1250
                                                                             GMB1640        5200       10480      5090    5090     2500     Machining Spindle box travel (Z-axis)            mm      600                         600                         750                         750
                                                                                                                                            range     Distance from spindle Max. mm                  800                         800                         950                         950
                                                                             GMB2030        5600       8700       4200    4200     2700
                                                                             GMB2040        5600       10580      5140    5140     2700                     Nose to table surface Min.       mm      200                         200                         200                         200

                                                                             GMB2540        6470       10580      5140    5140     3200                     Spindle taper (7:24)                     BT50                        BT50                        BT50                        BT50

                                                                             GMB2550        6470       12580      6140    6140     3200                     Spindle speed range              r/min   40-6000                     40-6000                     40-6000                     40-6000
                                                                                                                                            Spindle
                                                                                                                                                            Max. spindle torque              N.m     114/152         117/140     114/152         117/140     456/611         468/560     456/611         468/560
                                                                             GMB2560        6470       14880      7290    7290     3200
                                                                                                                                                            Spindle motor power              kW      12/16           18.5/22     12/16           18.5/22     12/16           18.5/22     12/16           18.5/22
                                                                                                                                                            Cutting feed speed range         mm/min 1-10000                      1-10000                     1-10000                     1-10000
     Specifications of Tool Shank & Draw Bar                                                                                                                                          X-axis m/min   20                          20                          20                          20
                                                                                                                                            Feed
                                                                                                                                                            Rapid travel              Y-axis m/min   20                          20                          20                          20
                                                                                                                                                                                      Z-axis m/min   16                          16                          16                          16
                                                                                                                                                            Max. tool length                 mm      350                         350                         350                         350
                                                                                                                                                            Type                                     Disk type, Chain type       Disk type, Chain type       Disk type, Chain type       Disk type, Chain type
                                                                                                                                                            Capacity                         N       Disk type20, Chain type32   Disk type20, Chain type32   Disk type20, Chain type32   Disk type20, Chain type32
                                                                                                                                            Tool
                                                                                                                                            magazine
                                                                                                                                                            Max. tool diameter        Full   mm      ∅125                        ∅125                        ∅125                        ∅125
                                                                                                                                                            Adjacent socket           Empty mm       ∅225                        ∅225                        ∅225                        ∅225
                                                                                                                                                            Tool changing time (Tip to tip) s        6                           6                           6                           6
     Model     D     D1    h      b   L   M   H H1 H2 Adopt draw bar   Model         D D1 D2       M    L     L1 L2 H H1 θ Adopt shank
                                                                                                                                                            Max. tool weight                 kg      20                          20                          20                          20
     BT50;                                                                                                                       BT50;
              ∅100 ∅85 35.4 25.7 101.8 M24 35 23.2     3   LDA-50BT    LDA-50BT   25   17   23   M24 85 45       35 10   5 45°
     MAS403BT                                                                                                                    MAS403BT                                             X-axis mm      0.025 (0.015 With scale)    0.025 (0.015 With scale)    0.030 (0.018 With scale)    0.030 (0.018 With scale)
                                                                                                                                                            Executing national
                                                                                                                                                                                      Y-axis mm      0.020 (0.010 With scale)    0.020 (0.010 With scale)    0.020 (0.010 With scale)    0.020 (0.010 With scale)
                                                                                                                                                            standard
                                                                                                                                            Positioning                               Z-axis mm      0.015 (0.010 With scale)    0.015 (0.010 With scale)    0.015 (0.010 With scale)    0.015 (0.010 With scale)
     Power & Torque                                                                                                                         accuracy                                  X-axis mm
                                                                                                                                                            According to                             ±0.005/300                  ±0.005/300                  ±0.005/300                  ±0.005/300
     SIEMENS 802DSL                            SIEMENS 802DSL                                SIEMENS 840D                                                                             Y-axis mm
                                                                                                                                                            JISB6330 standard                        (±0.003/300 With scale)     (±0.003/300 With scale)     (±0.003/300 With scale)     (±0.003/300 With scale)
                                                                                                                                                                                      Z-axis mm
                                                                                                                                                                                      X-axis mm      0.014 (0.010 With scale)    0.014 (0.010 With scale)    0.018 (0.012 With scale)    0.018 (0.012 With scale)
                                                                                                                                                            Executing national
                                                                                                                                                                                      Y-axis mm      0.012 (0.006 With scale)    0.012 (0.006 With scale)    0.012 (0.006 With scale)    0.012 (0.006 With scale)
                                                                                                                                                            standard
                                                                                                                                                                                      Z-axis mm      0.010 (0.006 With scale)    0.010 (0.006 With scale)    0.010 (0.006 With scale)    0.010 (0.006 With scale)
                                                                                                                                            Repeatability
                                                                                                                                                                                      X-axis mm
                                                                                                                                                            According to                             ±0.003                      ±0.003                      ±0.003                      ±0.003
                                                                                                                                                                                      Y-axis mm
                                                                                                                                                            JISB6330 standard                        (±0.002 With scale)         (±0.002 With scale)         (±0.002 With scale)         (±0.002 With scale)
                                                                                                                                                                                      Z-axis mm
                                                                                                                                                            Weight of machine                kg      22000                       26000                       31000                       34000
                                                                                                                                                            Electric total capacity          KVA     56              61          56              61          59              64          59              64
                                                                                                                                                            CNC system                               SIEMENS 802DSL FANUC 0i     SIEMENS 802DSL FANUC 0i     SIEMENS 802DSL FANUC 0i     SIEMENS 802DSL FANUC 0i
                   GMB10 Series                               GMB12 Series                                  GMB16/20/25 Series


10                                                                                                                                                                                                                                                                                                                  11
       Main Technical Specifications
Model                                              Units    GMB1620                       GMB1630                           GMB1640                           Model                                          Units    GMB2030                    GMB2040                    GMB2540                    GMB2550                    GMB2560

                Worktable size                     mm       1600×2000                     1600×3000                         1600×4000                                         Worktable size                  mm      2000×3000                  2000×4000                  2500×4000                  2500×5000                  2500×6000
                Distance between two columns mm             2100                          2100                              2100                                              Distance between two columns mm         2500                       2500                       3200                       3200                       3200
Worktable Max. load capacity                       kg       8000                          10000                             12000                             Worktable Max. load capacity                    kg      12000                      14000                      18000                      20000                      22000
                T-slot                             mm×N     22×9                          22×9                              22×9                                              T-slot                          mm×N    22×11                      22×11                      28×11                      28×11                      28×11
                Worktable travel (X-axis)          mm       2200                          3200                              4200                                              Worktable travel (X-axis)       mm      3200                       4200                       4200                       5200                       6200
                Saddle travel (Y-axis)             mm       2300                          2300                              2300                                              Saddle travel (Y-axis)          mm      2700                       2700                       3200                       3200                       3200

Machining Spindle box travel (Z-axis) mm                    1000                          1000                              1000                              Machining Headstock travel (Z-axis)  mm                 1000                       1000                       1000                       1000                       1000
range     Distance from spindle Max. mm                     1200                          1200                              1200                              range     Distance from spindle Max. mm                 1200                       1200                       1200                       1200                       1200
                Nose to table surface       Min.   mm       200                           200                               200                                               Nose to table surface Min.      mm      200                        200                        200                        200                        200
                Spindle taper (7:24)                        BT50                          BT50                              BT50                                              Spindle taper (7:24)                    BT50                       BT50                       BT50                       BT50                       BT50
                Spindle speed range                r/min    40-6000                       40-6000                           40-6000                                           Spindle speed range             r/min   40-6000                    40-6000                    40-6000                    40-6000                    40-6000
Spindle                                                                                                                                                       Spindle
                Max. spindle torque                N.m      1050/1435        1000/1228    1050/1435             1000/1228   1050/1435             1000/1228                   Max. spindle torque             N.m     1050/1435        1000/1228 1050/1435     1000/1228 1050/1435        1000/1228 1050/1435        1000/1228 1050/1435        1000/1228
                Spindle motor power                kW       30/41            30/37        30/41                 30/37       30/41                 30/37                       Spindle motor power             kW      30/41            30/37     30/41         30/37        30/41         30/37        30/41         30/37        30/41         30/37
                Cutting feed speed range           mm/min   1-8000                        1-8000                            1-8000                                            Cutting feed speed range        mm/min 1-8000                      1-8000                     1-8000                     1-8000                     1-8000
                                          X-axis m/min      10                            10                                10                                                                         X-axis m/min   10                         10                         10                         10                         10
Feed                                                                                                                                                          Feed
                Rapid travel              Y-axis m/min      10                            10                                10                                                Rapid travel             Y-axis m/min   10                         10                         10                         10                         10
                                          Z-axis m/min      10                            10                                10                                                                         Z-axis m/min   10                         10                         10                         10                         10
                Max. tool length                   mm       300                           300                               300                                               Max. tool length                mm      300                        300                        300                        300                        300
                Type                                        Chain type                    Chain type                        Chain type                                        Type                                    Chain type                 Chain type                 Chain type                 Chain type                 Chain type
                Capacity                           N        32, 40, 50, 60                32, 40, 50, 60                    32, 40, 50, 60                                    Capacity                        N       32, 40, 50, 60             32, 40, 50, 60             32, 40, 50, 60             32, 40, 50, 60             32, 40, 50, 60
Tool                                                                                                                                                          Tool
magazine
                Max. tool diameter        Full     mm       ∅125                          ∅125                              ∅125                              magazine
                                                                                                                                                                              Max. tool diameter Full         mm      ∅125                       ∅125                       ∅125                       ∅125                       ∅125
                Adjacent socket           Empty mm          ∅225                          ∅225                              ∅225                                              Adjacent socket          Empty mm       ∅225                       ∅225                       ∅225                       ∅225                       ∅225
                Tool changing time (Tip to tip) s           6                             6                                 6                                                 Tool changing time (Tip to tip) s       6                          6                          6                          6                          6
                Max. tool weight                   kg       20                            20                                20                                                Max. tool weight                kg      20                         20                         20                         20                         20
                                          X-axis mm         0.030 (0.020 With raster)     0.035 (0.020 With scale)          0.040 (0.025 With scale)                                                   X-axis mm      0.035 (0.022 With scale)   0.040 (0.025 With scale)   0.040 (0.025 With scale)   0.045 (0.025 With scale)   0.045 (0.025 With scale)
                Executing national                                                                                                                                        Executing national
                                          Y-axis mm         0.030 (0.020 With raster)     0.030 (0.020 With scale)          0.030 (0.020 With scale)                                         Y-axis mm                0.030 (0.020 With scale)   0.030 (0.020 With scale)   0.035 (0.020 With scale)   0.035 (0.020 With scale)   0.035 (0.020 With scale)
                standard                                                                                                                                                  standard
Positioning                               Z-axis mm         0.020 (0.010 With raster)     0.020 (0.010 With scale)          0.020 (0.010 With scale)          Positioning                    Z-axis mm                0.020 (0.010 With scale)   0.020 (0.010 With scale)   0.020 (0.010 With scale)   0.020 (0.010 With scale)   0.020 (0.010 With scale)
accuracy                                  X-axis mm                                                                                                           accuracy                       X-axis mm
                According to                                ±0.005/300                    ±0.005/300                        ±0.005/300                                    According to                                ±0.005/300                 ±0.005/300                 ±0.005/300                 ±0.005/300                 ±0.005/300
                                          Y-axis mm                                                                                                                                          Y-axis mm
                JISB6330 standard                           (±0.003/300 With scale)       (±0.003/300 With scale)           (±0.003/300 With scale)                       JISB6330 standard                           (±0.003/300 With scale)    (±0.003/300 With scale)    (±0.003/300 With scale)    (±0.003/300 With scale)    (±0.003/300 With scale)
                                          Z-axis mm                                                                                                                                          Z-axis mm
                                          X-axis mm         0.018 (0.012 With raster)     0.022 (0.014 With scale)          0.026 (0.016 With scale)                                             X-axis mm            0.022 (0.014 With scale)   0.026 (0.016 With scale)   0.026 (0.016 With scale)   0.030 (0.020 With scale)   0.030 (0.020 With scale)
                Executing national                                                                                                                                            Executing national
                                          Y-axis mm         0.018 (0.012 With raster)     0.018 (0.012 With scale)          0.018 (0.012 With scale)                                             Y-axis mm            0.018 (0.012 With scale)   0.018 (0.012 With scale)   0.022 (0.014 With scale)   0.022 (0.014 With scale)   0.022 (0.014 With scale)
                standard                                                                                                                                                      standard
                                          Z-axis mm         0.012 (0.006 With raster)     0.012 (0.006 With scale)          0.012 (0.006 With scale)                                             Z-axis mm            0.012 (0.006 With scale)   0.012 (0.006 With scale)   0.012 (0.006 With scale)   0.012 (0.006 With scale)   0.012 (0.006 With scale)
Repeatability                                                                                                                                                 Repeatability
                                          X-axis mm                                                                                                                                                    X-axis mm
                According to                                ±0.003                        ±0.003                            ±0.003                                            According to                            ±0.003                     ±0.003                     ±0.003                     ±0.003                     ±0.003
                                          Y-axis mm                                                                                                                                                    Y-axis mm
                JISB6330 standard                           (±0.002 With scale)           (±0.002 With scale)               (±0.002 With scale)                               JISB6330 standard                       (±0.002 With scale)        (±0.002 With scale)        (±0.002 With scale)        (±0.002 With scale)        (±0.002 With scale)
                                          Z-axis mm                                                                                                                                                    Z-axis mm
                Weight of machine                  kg       40000                         46000                             51000                                             Weight of machine               kg      57000                      63000                      73000                      80000                      88000
                Electric total capacity            KVA      89                96          89                96              89                96                              Electric total capacity         KVA     89               96        89            103          89            103          89            103          89            103
                CNC system                                  SIEMENS 840D      FANUC 18i   SIEMENS 840D      FANUC 18i       SIEMENS 840D      FANUC 18i                       CNC system                              SIEMENS 840D FANUC 18i     SIEMENS 840D FANUC 18i     SIEMENS 840D FANUC 18i     SIEMENS 840D FANUC 18i     SIEMENS 840D FANUC 18i



12