Docstoc

DryLin rail moment of inertia

Document Sample
DryLin rail moment of inertia Powered By Docstoc
					DryLin® N Low Profile
Linear Guide System

•   Low profile height and width

•   Replaceable polymer sliding elements

•   Anodized aluminum rail

•   High speed and acceleration possible

•   Lubricant-free

•   Lightweight
                                           DryLin® N17                          DryLin® N27-01


   DryLin® N
   Selection
   Guide


                                                     ¤ 6mm                                    ¤ 9.5mm

                                             17 mm                                 27 mm




Features
                Online Lifetime   •   Good for tight design            •    Through hole for flexible
                Calculation           constraints                           mounting
                www.igus.com      •   Replaceable glide pads           •    Extremely low friction/low wear
                                  •   Excellent for low loads          •    Replaceable glide pads
                                  •   Excellent corrosion resistance   •    Low weight
                                                                       •    Flexible size
                                                                       •    Excellent for low to medium
                                                                            loads




Properties
Maximum Load                                11 lbs (50 N)                         110 lbs (500 N)

Maximum Speed                              49 fps (15 m/s)                        49 fps (15 m/s)

Maximum Rail Length                       72 in. (1828 mm)                       11.5 ft (3500 mm)

Carriage Weight                            .0602 lbs (1.7 g)               .38 oz - .44 oz (10.8g - 12.5g)

Rail Weight                              1.6 oz/ft (150 g/m)                    3.01 oz/ft (290 g/m)

Rail Material                            Anodized Aluminum                      Anodized Aluminum

Carriage Material                          Brass / iglide® J                 Chromated Zinc / iglide® J

Temperature                                 -40 to 194°F                           -40 to 194°F

Preloaded for reduced clearance               Available                               Available
    DryLin® N27-02                        DryLin® N40                          DryLin® N80




                    ¤ 9.5mm                                 ¤ 9.5mm                                ¤ 12mm

         27 mm                             40 mm                                 80 mm




• Threaded adjusting studs      •   Flexible size                     •   May use one rail instead of two
  for easy attachment           •   Replaceable glide pads                narrow rails
• Flexible size                 •   Excellent for medium to high      •   High accelerations possible
• Replaceable glide pads            loads                             •   Replaceable glide pads
• Extremely low friction/low    •   Wide base for stable design       •   Extremely low friction/low wear
  wear                                                                •   Good for higher loads
• Excellent for low to                                                •   Aluminum carriage available for
  medium loads                                                            low weight/higher loads




        110 lbs (500 N)                  154 lbs (700 N)                        220 lbs (50 N)

        49 fps (15 m/s)                  49 fps (15 m/s)                       49 fps (15 m/s)

      11.50 ft (3500 mm)               11.50 ft (3500 mm)                    11.50 ft (3500 mm)

       .027 lbs (12.5 g)                  .066 lbs (30 g)                      .22 lbs (100 g)

    .016 lbs/inch (290 g/m)          .025 lbs/inch (450 g/m)              .064 lbs/inch (1140 g/m)

      Anodized Aluminum                Anodized Aluminum                     Anodized Aluminum

                                                                          Chromated Zinc / iglide® J
   Chromated Zinc / iglide® J       Chromated Zinc / iglide® J
                                                                             Aluminum available

         -40 to 194°F                     -40 to 194°F                          -40 to 194°F

            Available                     Not Available                         Not Available
                                                                            DryLin® N Low Profile Linear Guide Systems
                                                                                The DryLin® N series offers extremely low profiles in several widths, and is therefore ideal in tight space
                                                                                constraints. Like all DryLin® products the carriages are designed to glide smoothly on anodized alu-
                                                                                minum rails without the need for messy lubricants. They are also available in preloaded versions for
       Linear Guide System


                                               +194°F (+90ºC)
                                                                                reduced running clearance. DryLin® N is a particularly low-cost alternative to miniature ball bearing
                                               -40°F (-40ºC)                    systems, and is more precise and economical when compared to many custom-machined or simple
                                                                                plastic parts.


                                        Technical Data
       DryLin® N




                                        Sliding elements:
                                                    Maintenance-free
                                        Material:
                                                               iglide® J*
                                        Max. surface speed:
                                                      50 fps (15 m/s)
                                        Temperature range:
                                                    -40°F to +194°F
       1-888-803-1895
       1-401-438-7680




                                                  (-40 °C to +90 °C)
                                        * Other materials upon request

                                        DryLin® N             Height
                                        N17         .24 in (6.0 mm)
                                        N27         .37 in (9.5 mm)
                                        N40         .37 in (9.5 mm)
                                        N80       .47 in (12.0 mm)             17 mm        27 mm                  40 mm                              80 mm
       Telephone




                                                                                Advantages of DryLin® N
                                                                                    Small mounting height and width
       Fax




                                                                                    Maintenance-free and self-lubricating
                                                                                    High resistance to dirt
                                                                                    Corrosion-resistant
                                                                                    Low wear and low coefficient of friction
                                                                                    Lightweight due to aluminum polymer combination
                                                                                    Very high speed and acceleration possible
                                        DryLin® N40 in a closed-
                                                                                    Replaceable polymer sliding elements made of iglide® J
                                        loop drive conveyor
                                                                                    Base structure of the carriage made of plastic (size 17)
                                                                                    or zinc, chromated (size 27, 40 and 80)
                                                                                    Anodized aluminum rails
                                                                                    Available from stock
QuickSpec: www.igus.com/qs/DryLin.asp




                                                                                   Anodized aluminum rails
                                                                                   iglide® J plain bearing liner
                                                                                   Zinc chromated carriage Type 01
Internet: http://www.igus.com




                                                                                   (with mounting hole)
                                        DryLin® N80, black ano-                    Zinc chromed carriage Type 02
                                        dized used for adjusting                   (with thread)
E-Mail: sales@igus.com




                                        spotlights




                                                                                                                                                                 Online Lifetime
                                                                                                                                                                 Calculation
                                        DryLin® N80 in a belt-driven                                                                                             www.igus.com
                                        linear actuator for high-
                                        speed handling up to 12 m/s
       21.4
DryLin® N Low Profile Linear Guide Systems




                                                                                                                                                                          Linear Guide
                                                                                                                                                                          DryLin® N

                                                                                                                                                                          System
        Standard               Preload                Floating

DryLin® NW-17 = 17 mm Rail width

NW 17




                                                                                                                                                                          Specs/CAD/RFQ: www.igus.com/DryLinN.asp
The smallest size of the DryLin® N range is designed to have minimum
dimensions coupled with a high load capacity. In addition, this range
is free from lubrication and can run at high speeds.                                                          Standard 02                          Overmolded
                                                                                                               with thread                          with thread




                                                                                                                                                                          RoHS info: www.igus.com/RoHS.asp
                                                                                                                                                                          PDF: www.igus.com/pdf/DryLin.asp
NW 17 Preload
                                                                           DryLin® NW-40 = 40 mm Rail width
The NW 17 Preload model of the DryLin® N series provides for an
automatic pretension to the rail.
                                                                           NW 40

                                                                           Compared with smaller series, NW 40 is able to withstand significantly
                                                                           higher loads. Like all other DryLin® N series, the lubrication free design
                                                                           is capable of running at high linear speeds.




 Standard 01         Standard 02        Preload        Overmolded
 with mounting        with thread    with mounting     with mounting
      hole                           hole or thread    hole or thread


DryLin® NW-27 = 27 mm Rail width
                                                                            DryLin® NW-80 = 80 mm rail width
NW 27

The NW 27 series is available in 2 different versions: As a slide with a      NW 80
plain bore, and as a slide with a threaded bore. The lubrication free
                                                                              The largest of the DryLin® N series permits low installation heights
design is capable of running at high linear speeds.
                                                                              while offering high load-bearing capacity. The lubrication free design
                                                                              is capable of running at high linear speeds.
NW 27 Preload
Like NW 17 Preload, this larger NW 27 Preload model of DryLin® N
possesses the special feature of automatic pre-tension.

                                                                                    200
Overmolded
This version is practically identical to the standard slide NW-01/02-
27. Overmolded with iglide® J, however, it is easier to assemble and
store large quantities.
                                                                                          20
   Quick assembly
   Easier handling
                                                                           Load F (lbs)




                                                                                          2
                                                                                               0.3                                       3.5                         33
                                                                                                     Speed v (ft/s)
                                                                                                      dotted line: Size 17 z-direction
Maximum loads (per carriage)                                                                          dotted line: Size 27 z-direction
                                                                                                                                               Size 17 z-direction
                                                                                                                                               Size 27 z-direction
                                                                                                      dotted line: Size 40 z-direction         Size 40 z-direction

NW-02-17              =    11 lbs                                                                     dotted line: Size 80 z-direction         Size 80 z-direction

                                                                                          F = total of the loads on one rail
NW-01/02-27           =    110 lbs
NW-02-40              =    154 lbs                                                        Graph 21.1: Fv-Diagram, maximum permissible dynamic
NW-02-80              =    220 lbs                                                        loads of DryLin® N

                                                                                                                                                                                 21.5
                                                                       DryLin® N Low Profile Linear Guide Systems

                                        Eccentric Forces                                                                                                        Online Lifetime
                                                                                                                                                                Calculation
       Linear Guide System



                                                                                                                                                                www.igus.com



                                                                                                       The 2 : 1 Rule
                                                                                                       When using linear plain bearings it is important to ensure that the acting forces
       DryLin® N




                                                                                                       follow the 2:1 Rule (see drawing). If either the load or the drive force (F) is
                                                                                                       greater than twice the bearing length (1X), then a binding or interrupted motion
                                                                                                       may occur.
                                                                     2 : 1 Rule =                      If the location of the drive force or load cannot be changed, simply increase
                                                                     permissible distances             the distance between the bearings, or create a counterbalance to move the
                                                                     of the applied forces             center-of-gravity back within the 2 to 1 ratio.



                                        Fixed and Floating Bearing Mounting Instructions
       1-888-803-1895
       1-401-438-7680




                                             When using systems with 2 parallel rails, one side must be designated as the “fixed” rail, and the opposite side the “floating” rail.

                                        Why use floating bearings?
                                         • promotes smooth gliding performance and maximizes bearing life
                                         • prevents binding caused by parallelism and angle errors
                                         • decreases necessary drive force and wear by minimizing friction-forces
                                         • Enhances the precision of the system over the bearings’ lifetime.
                                         • Reduce assembly time and cost
                                                                                                               DryLin® N - Floating Systems
       Telephone




                                        Fixed Bearings                                                         Maximum float = ± .02” (.5 mm)
                                        The “fixed” bearing rail should be positioned closest to
                                        the drive force. This rail will determine the precision of
       Fax




                                        the system; no system should contain more than two
                                        “fixed” bearings.

                                        Floating/Self-Aligning Bearings                                        Standard Version                         Horizontal Float “LLZ”
                                        The “floating” rail should be the rail located furthest from
                                        the drive force. It is to act only as a guide, and will                Part No.                                 Part No.
                                        compensate for any misalignments or angle errors in the                Fixed Bearing -                          Horizontal Floating -
                                        system ensuring proper functionality.                                  CARRIAGE ONLY                            CARRIAGE ONLY
                                                                                                               NW-02-17                                 NW-02-17 LLZ
                                        Mounting Surfaces                                                                                               NW-01-27 LLZ
                                                                                                               NW-02-27 / NW-02-27
QuickSpec: www.igus.com/qs/DryLin.asp




                                        The mounting surfaces for rails and bearings should have
                                                                                                               NW-02-40                                 NW-02-27 LLZ
                                        a very flat surface (e.g milled surface) in order to enhance
                                        performance. Variations in these surfaces may be                       NW-02-80                                 NW-02-40 LLZ
                                        compensated for by using floating bearings.                                                                     NW-02-80 LLZ
Internet: http://www.igus.com




                                            Floating         Fixed
E-Mail: sales@igus.com




                                                                                                              Vertical Float “LLY”                       Vertical Float “LLYZ”

                                                                                                              Part No.                                   Part No.
                                                                                                              Vertical Floating -                        Horizontal/Vertical Floating -
                                                                                                              CARRIAGE ONLY                              CARRIAGE ONLY
                                                                                                              NW-02-17 LLY                               NW-02-17 LLYZ
                                                                                                              NW-01-27 LLY                               NW-01-27 LLYZ
                                        Automatic compensation of                                             NW-02-27 LLY                               NW-02-27 LLYZ
                                        parallelism errors                                                    NW-02-40 LLY                               NW-02-40 LLYZ
       21.6                                                                                                   NW-02-80 LLY                               NW-02-80 LLYZ
DryLin® N Low Profile Linear Guide Systems


Part No. for single carriages:




                                                                                                              Linear Guide
                                                                                                              DryLin® N
NW-02-17           Size 17 with thread




                                                                                                              System
NW-02-17P          Size 17 with pre-tension
NW-01-27           Size 27 with mounting hole
NW-01-27P          Size 27 with pre-tension
NW-02-27           Size 27 with thread




                                                                                                              Specs/CAD/RFQ: www.igus.com/DryLinN.asp
NW-02-27P          Size 27 with pre-tension
NW-11-27           Size 27 with mounting hole, overmolded
NW-12-27           Size 27 with thread, overmolded
NW-02-40           Size 40 with thread




                                                                                                              RoHS info: www.igus.com/RoHS.asp
NW-12-40           Size 40 with thread, overmolded




                                                                                                              PDF: www.igus.com/pdf/DryLin.asp
NW-02-80           Size 80 with thread
NW-12-80           Size 80 with thread, overmolded


Part No. for single rails:

NS-01-17, length (mm)   Width of rail 17 mm                 DryLin® N for in a closed loop conveyor
NS-01-27, length (mm)   Width of rail 27 mm
NS-01-40, length (mm)   Width of rail 40 mm
NS-01-80, length (mm)   Width of rail 80 mm




Structure of the Part No. for assembled systems:

                                                            NK -02 -27 -02 -500             LLZ       C5=20

Assembled system

Type of carriage
01       with thru bore
02       with thread
11       with thru bore, overmolded, size 27
12       with thread, overmolded, size 27, 40

Size
17/27/40/80

No. of carriages

Length of rail in mm

Carriage options
Leave blank:       Standard
LLZ:               Floating z-direction
LLY:               Floating y-direction
LLYZ:              Floating y- and z-direction
P:                 Preload (max. 1 N), only sizes 17/27

Rail options
Leave blank:       Standard with holes
No holes:          Without holes
C5 = ... mm        If hole spacing is not symmetrical


                                                                                                                     21.7
                                                                                              DryLin® N Low Profile Linear Guide Systems - NK-02-17

                                                                                                      Data:
       Linear Guide System


                                                                                                      Part No. carriage                 NW-02-17(P)
                                                                                                      Part No. rail                        NS-01-17
                                                                                                      Rail weight                1.61 oz/ft (150 g/m)
                                                                                                      Carriage weight                   .06 oz.(1.7 g)
                                                                                                      Max. rail length(1)           72 in (1828 mm)
       DryLin® N




                                                                                                      Standard bore pattern symmetrical (C5 = C6)
                                        Carriages with mounting nuts                                  Preload available                           Yes
                                                                                                      Max. static load                         11 lbs.
                                                                                                      (1)
                                                                                                          4000 mm rail available upon request
                                        Dimensions in mm
                                                                                                                                                    All dimensions are in (mm) unless
                                                                                          60
                                                                                                                                                    otherwise specified
                                         C5 =                                        20                                                 C6 =
       1-888-803-1895
       1-401-438-7680




                                         20 ...49                                                                                       20 ...49
                                         mm                                          14                                                 mm




                                                                                                max. 1960
       Telephone




                                                                                                                                                     Static load-bearing capacity and
                                                                                                                                                     geometric moment of inertia
       Fax




                                                                                    9.6
                                                                                                       S = min. 2




                                         Hole min. ø 5
                                                                                    M3                                                                                l z = 120 mm
                                                                                                                                                                                    4

                                                                                                                                                            11 lbs                 3
                                                                                                                                                                      Wb = 33 mm
                                          Depth for screw tightening




                                                                                                                                                                          Mx = .44 lbf · ft
                                                                                                                    6 ±0,3
                                          max. s + 2.5
                                          min. s + 0.5




                                                                                                                                                                                              My = .13 lbf · ft
                                                                                                                                                                                              Mz = .13 lbf · ft
                                                                                                       1
QuickSpec: www.igus.com/qs/DryLin.asp




                                                                                                                             x                                   11 lbs
                                                                                                                                                                           4
                                                                                                      y                                                      l y = 1700 mm
                                                                                        0                                                                                  3
                                                                                    17 -0,4                                                                  Wb = 200 mm

                                                                          for Machine Screws M3                     z
                                                                          DIN 7984/DIN 6912/DIN 84
                                                                          EN ISO 1707
Internet: http://www.igus.com




                                                                                                                                 Structure of the Part No. – Standard version
E-Mail: sales@igus.com




                                                                                                                                  NK -02 -17 P -2 -500
                                                                                                                                                                     Length of rail (mm)
                                                                                                                                                                     Number of carriages
                                                                                                                                                                     “P” for preloaded
                                                                                                                                                                     Size
                                                                                                                                                                     Thread
                                                                                                                                                                     Complete system




       21.8                                                            Testing and sorting machines                                     CAD files online: www.igus.com
DryLin® N Low Profile Linear Guide Systems
NK-01-27 / NK-02-27
Version 01: Carriages with thru hole                                     Version 02: Carriages with threaded boss




                                                                                                                                                                  Linear Guide
                                                                                                                                                                  DryLin® N
                          Data:                                                                Data:




                                                                                                                                                                  System
                          Part No. carriage          NW-01-27(P)                                   Part No. carriage          NW-02-27(P)
                          Part No. rail                  NS-01-27                                  Part No. rail                  NS-01-27
                          Rail weight           3.01 oz. (290 g/m)                                 Rail weight           3.01 oz. (290 g/m)
                          Carriage weight          .38 oz. (10.8 g)                                Carriage weight          .44 oz. (12.5 g)
                          Max. rail length       140 in (3560 mm)                                  Max. rail length       140 in (3560 mm)




                                                                                                                                                                  Specs/CAD/RFQ: www.igus.com/DryLinN.asp
                          Standard bore pattern symmetrical (C5 = C6)                              Standard bore pattern symmetrical (C5 = C6)
                          Preload available                      Yes                               Preload available                      Yes
                          for reduced clearance        .22 lbs (1N)                                for reduced clearance        .22 lbs (1N)




                                                                                                                                                                  RoHS info: www.igus.com/RoHS.asp
Dimensions in (mm) unless otherwise specified




                                                                                                                                                                  PDF: www.igus.com/pdf/DryLin.asp
                                            40                                                                          40
   C5 =                                     30                                 C5 =                                     30
   20 - 49                                                                     20 -49
   mm                                       20                                 mm                                       20




                                         60                                                                           60

* Length of overmolded carriages version NW-11-27 and NW-12-27: 34 ± 0.7 mm

                                     NK-01-27                                                            NK-02-27
                          for Machine Screws M4
                          DIN 7984 / DIN 6912
                          DIN 84 / EN ISO 1707                                                                   M4
                                                                                                                  max. torque .88 lbf · ft (1.2 Nm)
                                       14
                                                                                                                                   Hole min. Ø 6.5
                                                                0.8
                               1.5




                                                                                    max. s + 4.5
                                                                                  Screw length
                                                                                    min. s - 1
 9.5 -0.4
      0.4




                                                                                                                                                     s = min. 5
            3




                               1.5




                                                                1.5




                                         0
                                     22 -0.4
                                      27


Static load-bearing capacity and geometric
moment of inertia                                                                                      112 lbs      l z = 588 mm
                                                                                                                                   4



                                               4
                112 lbs    l z = 588 mm
                                                                                                                        Mx = 3.7 lbf · ft

                                Mx = 3.7 lbf · ft

                                                    My = 1.84 lbf · ft                                                                   My = 1.84 lbf · ft
                                                    Mz = 1.84 lbf · ft                                                                      Mz = 1.84 lbf · ft



                     112 lbs                                                                                112 lbs
                                 4                                                                                       4
                 l y = 6524 mm                                                                           l y = 6524 mm

CAD files online: www.igus.com                                                                                                                                           21.9
                                                                            DryLin® N Low Profile Linear Guide Systems - NK-02-40


                                                                                     Data:
       Linear Guide System


                                                                                      Part No. carriage                       NW-02-40
                                                                                      Part No. rail                           NS-01-40
                                                                                      Rail weight                   4.84 oz/ft (450 g/m)
                                                                                      Carriage weight                    1.06 oz. (30 g)
                                                                                      Max. rail length(1)             140 in (3550 mm)
       DryLin® N




                                                                                      Standard bore pattern        symmetrical (C5 = C6)
                                                                                      (1)
                                                                                          4000 mm rail available upon request


                                                                                                                                      50

                                                                                                                                      40
                                                                                                                                      20
       1-888-803-1895
       1-401-438-7680




                                         C5 = 20-49.5 mm (C5 = C6)                                                                    60                           C5 = 20-49.5 mm (C5 = C6)


                                                                                                                          max. 3560
       Telephone




                                        * Length of carriages overmolded version NW-12-40: 52 mm
       Fax




                                                      M4 - max. torque 11 lbf - in (1.2 Nm)

                                                                                23
                                                                                                                                           Static load-bearing capacity and geometric
                                                                                                            s=min.5




                                                                       Hole Min. Ø 6.5
                                                                                                                                           moment of inertia


                                                                                                                                                                  I = 970 mm4
                                               0.8




                                                                                                                                                      157 lbs     Wb = 170 mm3
                                                                                                                                                                                       My = 4.4 lbf · ft
                                                                                                                                                                                       Mz = 4.4 lbf · ft
                                         9.5




                                                                                                                                                                    Mx = 12 lbf · ft
                                                                          1.4
QuickSpec: www.igus.com/qs/DryLin.asp




                                                                                                                                                                                               157 lbs

                                                                                40
                                                                                                                                                                                           I = 26400 mm4
                                                                                                                                                                                           Wb = 660 mm3
                                                                                              For machine screws M4
                                                                                              DIN 7984/DIN 6912/DIN 84
                                                                                              EN ISO 1707 / EN ISO 7045
Internet: http://www.igus.com




                                                                                                                                               Option:

                                        DryLin® NK – Complete system                                                                           Polymer End cap for rail,
E-Mail: sales@igus.com




                                                                                                                                               Part No. NSK-40
                                        Structure of the Part No. – Standard version

                                         NK -02 -40 -2 -500
                                                                                     Length of rail (mm)
                                                                                     Number of carriages
                                                                                     Size
                                                                                     Thread
                                                                                     Complete system



     21.10                              CAD files online: www.igus.com
DryLin® N Low Profile Linear Guide Systems - NK-02-80

                                           Data:
                                             Part No. carriage (Zinc)                        NW-02-80




                                                                                                                                                                                  Linear Guide
                                             Part No. carriage (Aluminum)                NW-02-80AL




                                                                                                                                                                                  DryLin® N
                                             Part No. rail                                   NS-01-80




                                                                                                                                                                                  System
                                             Rail weight                       12.26 oz./ft (1140 g/m)
                                             Carriage weight (Zinc)                   3.53 oz. (100 g)
                                             Carriage weight (Aluminum)
                                             Max. rail length(!)                     140 in (3560 mm)




                                                                                                                                                                                  Specs/CAD/RFQ: www.igus.com/DryLinN.asp
                                             Standard bore pattern                symmetrical (C5 = C6)
                                             (1)
                                                 4000 mm rail available upon request
                                                     80*
                                                     68




                                                                                                                                                                                  RoHS info: www.igus.com/RoHS.asp
                                                                                                                                                                                  PDF: www.igus.com/pdf/DryLin.asp
         C5 = 25-99.5 mm                         56                                                     C6 = 25-99.5 mm




                                           M4
                                                                                                                              * carriage length for overmolded NW-12-80 = 83 mm
  40**




                                                 igus                                                                         ** size 45 on request




                                                150

                                             max. 3560




                                                           57
                                                                                          Tightening depth max. 6.5
                                                           45
                 +0.3
                 – 0.3




                                                                                                                                               x
                  12




                         1.6                                                                  M4 - max. torque 18 lbf · in.         y
                                                           40**                               DIN 7984/DIN 6912/DIN 84
                                                           80                                 EN ISO 1707                                 z


Static load-bearing capacity and geometric moment of inertia



                           I=2900 mm
                                     4                    My = 11 lbf · ft
             225 lbs                 3
                           Wb=380 mm                      Mz = 11 lbf · ft

                                Mx = 23.9 lbf · ft
                                                     225 lbs




Structure of the Part No. – Standard version

 NK -02 -40 -2 -500                           -LLZ
                                                                   Carriage option
                                                                             Standard - Leave blank
                                                                             Floating z-direction - LLZ
                                                                             Floating y-direction - LLY
                                                                             Floating y- and z-direction - LLYZ
                                                                   Length of rail (mm)                                                         Online Lifetime
                                                                   Number of carriages                                                         Calculation
                                                                   Size                                                                        www.igus.com
                                                                   Thread
                                                                   Complete system

CAD files online: www.igus.com                                                                                                                                                        21.11

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:40
posted:3/24/2011
language:English
pages:11