T jig grinding machine

Document Sample
T jig grinding machine Powered By Docstoc
					T
E
C
H
N
O
L
O
G
I
E
S
PCB ASSEMBLY LINES
FUJI AUTOMATIC SMT LINE




                           m PRINTER GSP- II E
                           SCREEN
                           m DISPENSER GL - VE
                           ADHESIVE

                           m
                           PICK-AND-PLACE MACHINE CP - IV - 2
                           m
                           MULTIFUNCTIONAL PICK-AND-PLACE MACHINE IP - II

                           m / CURING OVEN SMT 400 - 32 C
                           REFLOW

                           m
                           WAVE SOLDERING MACHINE ERSA- 500 N




m range
component                           from 1005 to 54 x 54 mm IC
m
board material                      copper clad glass epoxy laminate
m
board thickness                     0.8 - 4 mm
m
board width                         500 mm
m
minimal board dimensions            80 x 50 mm
m accuracy
placement                           +/- 0.10 mm
m rate
placement                           0.7 sec/comp
m repeatability
placement                           99.99 %
m
maximal component height            6 mm
m
temperature                         00...6000C
DYNAPERT AUTOMATIC THT LINE

UCSM - C SEQUENCER


                                      m
                                      feed                              roller conveyer
                                      m spacing
                                      component                         5 mm or 10 mm
                                      mstations (types of components)
                                      number of                          60




VCD - F AXIAL COMPONENT INSERTION MACHINE


                                      m
                                      feed                      roller conveyer
                                      m of components
                                      dimensions                φ mm max.
                                                                  9,5x28
                                      m lead diameter
                                      component                 0.42...0.91 mm
                                      m
                                      tape size                 41.65...77.72
                                      m
                                      insertion area            457.2 mm x 457.2 mm
                                      m speed
                                      placement                 16,000 components/hour




DIP - G INTEGRATED CIRCUIT INSERTION MACHINE
                                       m
                                       feed                      stick
                                       m type
                                       component                 6...20 leads
                                       m material
                                       component                 ceramic, plastic
                                       m
                                       insertion area            457.2 mm x 457.2 mm
                                       m speed
                                       placement                 5,000 components/hour




PCBs MANUFACTURED BY THESE TECHNOLOGIES
    OK INDUSTRIES MANUAL SMT LINE FOR
       PROTOTYPES AND SMALL SERIES


SSP - 85A STENCIL                     m application of the solder paste on complex PCBs
                                      meant for the
                                      m
                                      special screens for each board have to be used
                                      m year
                                      manufacture                                    1996




SMT - 8500 PLACEMENT MACHINE

                                      m of solder paste by means of a syringe type device
                                      deposition
                                      m
                                      manual mounting of components




JEM - 410 OVEN


                                      m
                                      it allows component soldering on both sides
                                      m
                                      it allows temperature correlation to conveyer belt speed
                                      m
                                      maximal allowed dimensions for PCBs:
                                              - width 262 mm
                                              - height 38 mm




 FCR - 2000, SMT - 2000 PCB REWORK STATIONS

                                      Rework stations
                                      m : IC mounting - dismounting
                                       FRC 2000
                                      m : troubleshooting and rework with vacuum pickup
                                       SMT 2000
                                                    and profiled soldering gun
DIE - TOOLS
MANUFACTURING DEPARTMENT

  FIDIA DIGIT 218 5 AXIS MACHINING CENTRE

                                    m by means of PC
                                       programming
                                    m  POWERMILL software
                                    m  Siemens numerical control
                                    m  performs complex geometry cutting operations
                                    m titanate high-speed steel or hard-cutting alloy tools
                                       works with
                                    m  maximal weight of the part to be worked 10,000 Kg
                                    mdimensions
                                       work table                              2,000x1000x800 mm
                                    m speed
                                       tool rotation                           28,000 rot / min.max.
                                    m the 5 axes
                                       feed rate on                            20,000 mm / min.
                                    m magazine
                                       15 tool-hole
                                    m  C axis rotation continues from          +360° ÷ -360°
                                    m  B axis rotation continues from          +110°÷  -110°
                                    m year
                                       manufacture                             1996
   FERRARI S82 4 AXIS MACHINING CENTER

                                         m by means of PC
                                         programming
                                         m
                                         POWERMILL software
                                         m P numerical control
                                         Selca 3045
                                         m
                                         performs complex geometry cutting operations
                                         m titanate high-speed steel or hard-cutting alloy tools
                                         works with
                                         m
                                         maximal weight of the part to be worked 7,000 Kg
                                         mdimensions
                                         work table                              2,000x820x1,000 mm
                                         m rotation speed
                                         standard tool                           2,500 rot / min
                                         m the 3 axes
                                         feed rate on                            5,000 mm / min.
                                         m magazine
                                         24 tool-hole
                                         m
                                         C axis rotation index from              +90° ÷ -90°
                                         m year
                                         manufacture                             1996

   FERRARI A17 4 AXIS MACHINING CENTRE

                                         m by means of PC
                                         programming
                                         m
                                         POWERMILL software
                                         m numerical control
                                         Selca S1200
                                         m
                                         performs complex geometrical cutting operations
                                         m titanate high-speed steel or hard-cutting alloy tools
                                         works with
                                         m
                                         maximal weight of the part to be worked 1,000 Kg
                                         mdimensions
                                         work table                              1,050x560x400 mm
                                         m speed
                                         tool rotation                           2,500 rot / min.
                                         m the 3 axes
                                         feed rate on                            3,000 mm / min.
                                         m magazine
                                         30 tool-hole
                                         m
                                         C axis rotation index from                   ÷ -90°
                                                                                 +90° at 5°
                                         m year
                                         manufacture                             1993

   FERRARI A17 3 AXIS MACHINING CENTER

                                         m by means of PC
                                         programming
                                         m
                                         POWERMILL software
                                         m numerical control
                                         Selca S1200
                                         m
                                         performs complex geometrical cutting operations
                                         m titanate high-speed steel or hard-cutting alloy tools
                                         works with
                                         m
                                         maximal weight of the part to be worked 1,000 Kg
                                         m dimensions
                                         work table                              1,050x560x400 mm
                                         m speed
                                         tool rotation                           4,000 rot / min.max.
                                         m the 3 axes
                                         feed rate on                            3,000 mm / min.
                                         m magazine
                                         21 tool-hole
                                         m year
                                         manufacture                             1991
DIE - TOOLS
MANUFACTURING DEPARTMENT
  SABRE 1000 4 AXIS MACHINING CENTER
                                          m
                                          Euclid 3D and Gibbs 2D graphical programming -software
                                          m ACRAMATIC 2100 numerical control
                                          high capacity
                                          m cutting operations of complex geometry
                                          it can perform
                                          m high-speed titanium steel or hard-cutting alloy tools
                                          it works with
                                          m
                                          maximal weight of the workpiece to be processed     700 Kg
                                          m of the work table
                                          dimensions                                 1020x510x560 mm
                                          m speed
                                          tool rotation                              60 - 8000 rot / min
                                          m the 4 axes
                                          feed rate on                               3 -15000 mm / min
                                          m
                                          21 tool locations magazine
                                          m year
                                          manufacture                                1996




                          Male die for car brake lamp




                                                         Al housing



 ARROW 500 MACHINING CENTER

                                          m
                                          Euclid 3D graphical programming software
                                          m ACRAMATIC 2100 numerical control
                                          high capacity
                                          m cutting operations of complex geometry
                                          it can perform
                                          m high-speed titanium steel or hard-cutting alloy tools
                                          it works with
                                          m
                                          maximal weight of the workpiece to be processed     500 Kg
                                          m of the work table
                                          dimensions                                 600x510x560 mm
                                          m speed
                                          tool rotation                              60 - 10000 rot / min
                                          m the 4 axes
                                          feed rate on                               3 -15000 mm / min
                                          m
                                          21 tool locations magazine
                                          m year
                                          manufacture                                2001




                           Al housing




                                                        Al housing
DIE - TOOLS
MANUFACTURING DEPARTMENT
 ROBOFORM 30 ELECTROEROSION MACHINES

                                         m
                                         massive copper or graphite electrode
                                         m range:
                                         application
                                                l 3D profiles
                                                l heat treated parts, with hardness over 65 HRC,
                                                  including hard-cutting alloys;
                                         m
                                         stroke:
                                                l x = 350 mm, y = 250 mm, z =340 mm, c = 360°
                                         m
                                         accuracy                                            0,01m m
                                         mpower
                                         generator                                           32 A
                                         m
                                         maximal electrode weight                            30 Kg
                                         m year
                                         manufacture                                         1999




                          Tool plate
                          Plastic injection tool




                                                   Tool plate
                                                   Plastic injection tool


 ROBOFIL 310 ELECTROEROSION MACHINES



                                          mwire electrode                     φ . . 0.30 mm
                                                                                0.10 .
                                          m range:
                                          application
                                                 lof any geometrical configuration;
                                                   profiles
                                                 l heat treated parts with hardness over 65 HRC, including
                                                    hard-cutting alloys;
                                                 l any electricity conductive materials
                                          m
                                          stroke:
                                                 l x = 400 mm, y = 250 mm, z = 400 mm, u = 400 mm, v = 250 mm
                                          m
                                          accuracy                                            0.01 mm
                                          m cutting option
                                          cone shape                                          0° ÷ 30°
                                          m
                                          maximal dimensions of workpiece                     500x300 mm
                                          m
                                          5 axes profiles (positioned as 4 + 1)
                                          m
                                          maximal workpiece height                            400 mm
                                          m year
                                          manufacture                                         1997




                         Complex tool for stamping,
                         bending, notching, separating, drawing




                           Complex tool for stamping,
                           bending, notching, separating, drawing
DIE - TOOLS
MANUFACTURING DEPARTMENT
NC PROFILE GRINDING MACHINES

                                                m accuracy
                                                processing               0.003 mm
                                                m dimensions 250 x 125 x 100 mm
                                                workpiece
                                                m
                                                grinding wheel dimensions
                                                                         l mm max.
                                                                           width: 4
                                                                           φ150
                                                                         l mm
                                                                            max.
                                                m
                                                grinding range           l parts
                                                                           active die
                                                                         l heat treated parts of high hardness
                                                m
                                                the processed surface is magnified and displayed on a screen by
                                                 means of a light spot
                                                m year
                                                manufacture                1989




                                Steel pellets




                                                                  62 HRC punch


 JIG GRINDING, MARKING OUT, BORING AND DRILLING MACHINES

                                                m
                                                grinding accuracy               0.01 mm
                                                m diameter
                                                workpiece                       0.5 . . . 250 mm
                                                m height
                                                workpiece                       90 mm max.
                                                m material hardness
                                                workpiece                       60 . . . 65 HRC
                                                m diamond tool
                                                grinding with
                                                m speed
                                                tool rotation
                                                                  l
                                                                  electrically   6 000 . . . 80 000 rot/min
                                                                  l
                                                                  pneumatically 250 000 rot/min max.
                                                m year
                                                manufacture                     1992




                               Metal insertion from plastic
                               injection mould




                                                          Pellet for plastic
                                                             injection tool
DIE - TOOLS
MANUFACTURING DEPARTMENT


MILLING MACHINES WITH ELECTRONIC DISPLAY OF COORDINATES

                                                m
                                                accuracy                                        0.0 1 mm
                                                m
                                                maximal dimensions of the workpiece
                                                                              600 x 400 x 400 mm
                                                m
                                                rotation range                40 . . . 6 300 rot/min
                                                mfeed
                                                automatic                     8 . . . 400 mm/min
                                                m processing option
                                                1 direction
                                                m possibilities:
                                                processing
                                                                 l surfaces
                                                                  cylindrical
                                                                 lgear wheels
                                                m year
                                                manufacture                   1988




                               Part of the tool for
                               railway inductors




                                                           Tool holder plate




THERMAL AND THERMOCHEMICAL TREATMENT DEPARTMENT

                                             mhigh alloy steels, as well as the modern units for thermal and
                                             thermochemical treatment play an important role in manufacturing
                                             of tools.
                                             m treatment department is endowed with electrical ovens,
                                              the thermal
                                               working in controlled atmosphere.
                                             mthe usual thermal and thermochemical treatments are: methane gas
                                             carburizing and ionic nitridation, which confer the tools, especially plastic
                                             injection ones, high wearing resistance; thus millions of pieces can be
                                             injected with a single tool.
DIE - TOOLS
MANUFACTURING DEPARTMENT


   MAZAK VERTICAL CENTER NEXUS 510C- II

                                          mY- / Z - axses)
                                           travel (X- /                            1050/510/510 mm
                                          mtable size                              1300x500 mm
                                          m
                                          max.load capacity(evenly distributed)    1200 kg
                                          m speed
                                          max. spindle                             12000 rot/min
                                          mtype
                                           tool shank                              CAT No. 40
                                          m
                                          Max.tool diameter                        φ150 mm
                                                                                    max.
                                          m rate (X- / Y- / Z - axses)
                                          rapid traverse                           36m/min
                                          mmachine weight                          6900 kg
                                          m
                                          Mazatrol Matrix CNC
                                          m year
                                           manufacture                             2008




                                                  The machine is equipped with MAZATROL MATRIX CNC
                                          system,the most advanced hardware incorporating a wide variety
                                          of new features realizes higher productivity with high speed,high
                                          accuracy machining and easier operation.
DIE - TOOLS
MANUFACTURING DEPARTAMENT

EPDM INJECTION MOULD FOR ADHESION ON GLASS SUITABLE FOR CAR GLASS ENCAPSULATION .



                                                                            It is equipped with hot
                                                                            runner system with
                                                                            hydraulic valves; the
                                                                            car glass is fixed by
                                                                            suction-cup units and
                                                                            the ejection is also
                                                                            pneumatic.




      stationary part of the mould                      movable part of the mould
DIE - TOOLS
MANUFACTURING DEPARTAMENT

PLASTIC INJECTION MOULD EQUIPPED WITH HOT RUNNER SYSTEM WITHOUT VALVES AND SLIDES ACTUATED MECHANICALLY AND HYDRAULICALLY




    Stationary part of the mould                                       Movable part of the mould
PUNCHING, STAMPING, DRAWING
PROCESSING LINE
SCHALL - SEP 40 AUTOMATIC PRESS

                                            m
                                            application                   l stamping, drawing, flattening,
                                                                            punching,
                                                                            notching, bending, cutting for brass, copper,
                                                                            bronze, aluminium, stainless steel and
                                                                            nickel-silver strips up to 1.5 mm tickness
                                            m
                                            technical                     l capacity                       400 kN
                                            characteristics               l no. of strokes/min             100I500
                                                                          l stroke                         70 mm. max.
                                                                          l belt width                     8-160 mm
                                                                          l tool dimensions 690x610x420 mm
                                                                            maximal
                                            m year
                                            manufacture                   2001




                             Earthing blade
                             Protection module for 10 pair
                             disconnection module




                                                           Earthing blade
                                          Connection/disconnection module


BRUDERER- BSTA 180 AUTOMATIC PRESS

                                            m
                                            application                   l stamping, drawing, flattening,
                                                                            punching,
                                                                            notching, bending, cutting for brass, copper,
                                                                            bronze, aluminium, stainless steel and
                                                                            nickel-silver strips up to 1.5 mm tickness
                                            m
                                            technical                     l capacity                       180 kN
                                            characteristics               l no. of strokes/min             100I1000
                                                                          l stroke                          40 mm max.
                                                                          l belt width                      100 mm max.
                                                                          l tool dimensions 359x300x400 mm
                                                                            maximal
                                            m year
                                            manufacture                   1995




                             Contact blade
                             Connection/disconnection module




                                                           Contact blade
                                              Protection module for 10 pair
                                                     disconnection module
PUNCHING, STAMPING, DRAWING
PROCESSING LINE
BRUDERER - BSTA 30 AUTOMATIC PRESS
                                            m
                                            application                     l stamping, drawing, flattening,
                                                                              punching,
                                                                              notching, bending, cutting for steel, brass,
                                                                             copper, bronze, aluminium, stainless
                                                                             steel and nickel-silver strips
                                            m
                                            technical                       l capacity                      30 tf
                                            characteristics                 l no. of strokes/min            100I250
                                                                            l stroke                        48 mm max.
                                                                            l belt width                    160 mm max.
                                                                            l tool dimensions 480x230x300mm
                                                                              maximal
                                            m year
                                            manufacture                     1975




                             Contact lamella
                             Individual protection module
                             Cutter lamella
                             10 pair modular connector




                                                         Contact lamella
                                                    Protection module for
                                            10 pair disconnection module


    TOX 22 ECCENTRIC-GEAR PRESS
BLISS - CSHEET JOINING MACHINE
                                         m
                                         application:                 l
                                                                      joining sheet steel thickness 1-4 mm

                                         m tehnice
                                         caracteristici               lforce
                                                                      presure                35-50 kN
                                                                      l strenght
                                                                      breking                2100-4000 N

                                         m year
                                         manufacture                  2008




                                                                  TOX clinching




                                                             assembled frame
METAL SHEET PROCESSING LINES
  TRUMATIC 200 R SHEET METAL WORKING MACHINE
                                           m
                                           Application:
                                                 w  punching and stamping of different profiles, including
                                                   contouring for steel and aluminium sheet up to 2.5 mm
                                                     thickness and stainless steel sheet of 1mm and 1.5 mm
                                                 w of ribs, air ventilation holes, wall supporting surfaces,
                                                    forming
                                                     deep drawings for M3, M4 threads in steel or aluminium sheet
                                                     of 1mm and 1.5 mm thickness
                                           m
                                           Technical characteristics:
                                                 w sheet dimensions
                                                    maximal
                                                              2500 x 1250 mm
                                                 w sheet thickness
                                                    maximal
                                                              5 mm
                                                 w sheet weight
                                                    maximal
                                                             150 Kg
                                                 w generated by a programmable increment of ± 0,03 mm
                                                    profiles
                                                 w  CNC processing and PC connection
                                                 w dimensions (including protection area)
                                                    overall
                                                             6000 x 6000 x 2100 mm max.
                                                 w  tools included: punches and dies for steel and aluminium
                                                   sheet up to 2.5 mm thickness and stainless steel sheet of
                                                   1mm and 1.5 mm
                                           m year
                                           Manufacture                                             1998
                                                                                                   2000


                                 Lateral panel
                                 General distribution panels




                                                  Vertical holders
                                                     Rack 19” 44”



  TRUMABEND V 85 S PRESS BRAKE

                                            m
                                            Application:
                                                  w of sheet of
                                                     bending
                                                             - maximal thickness                   3 mm
                                                             - maximal bending length              2550 mm
                                                             - minimal width of the bended side
                                                                       8.5 mm for sheet up to 1.5 mm thickness
                                                                      13.5 mm for sheet of 2 I3 mm thickness
                                            m
                                            Technical characteristics:
                                                  w bending force
                                                     maximal                                       85 tf
                                                  w  automatic positioning of back-stops
                                                  w  CNC system for bending programs
                                                  w  possibility to operate simultaneously with several work stations
                                            m year
                                            Manufacture                                            1999




                                 Lower cover
                                 Cross connect cabinet




                                                     Upper cover
                                             Cross connect cabinet
METAL SHEET PROCESSING LINES

TRUMABEND V50 PRESS BRAKE


                                        m
                                        Application:
                                               w of metal sheet of
                                                 bending
                                                         - maximal thickness                       3 mm
                                                         - maximal bending length              1250 mm
                                                         - minimal width of the bended side
                                                                   8.5 mm for sheet up to 1.5 mm thickness
                                                                  13.5 mm for sheet of 2 /3 mm thickness
                                        m
                                        Technical characteristics:
                                               w bending force
                                                 maximal                                       50 tf
                                               w automatic positioning of back-stops
                                               w CNC system for bending programs
                                               w possibility to operate simultaneously with several work stations
                                        m year
                                        Manufacture                                            2001




                          Box wall
                          Telephone niche




                                                        Fuses support
                                       Power distribution and metering
                                                         indoor cabinet




TRUMACUT E 1030 - GUILLOTINE SHEARS

                                            m:
                                            Application               l metal profiles:aluminium,steel,
                                                                      cutting of
                                                                                           staineless
                                            Technical characteristics l
                                            m                         cutting lengh 3000mm
                                                                      lSheet thickness  Steel:      10mm
                                                                                        Auminium: 10mm
                                                                                        Stainless : 6.5mm

                                            m year
                                            Manufacture                        2006
 WELDING ASSEMBLING LINE


CA DDY-200 EQUIPMENT WITH INVERTER FOR MANUAL ELECTRIC ARC WELDING
                                                mloading
                                                maximum                       200 A / 35%
                                                mdegree
                                                protection                    IP 23
                                                m
                                                electrode diameter            2I4 mm
                                                m
                                                application                   manual electric arc welding of the following
                                                                              materials: alloy and non-alloy steel of at
                                                                              least 1 mm thickness
                                                m year
                                                manufacture                   2000 ESAB Sweden




                                Door holder
                                Assembling by manual electric welding




                                                              Axle carrier
                                      Assembling by manual electric welding




LKB-320 EQUIPMENT FOR SEMIAUTOMATIC ELECTRIC WELDING IN PROTECTIVE ATMOSPHERE

WITH MIGMAG FUSIBLE ELECTRODE

                                               mloading
                                               maximum                      320 A / 35%
                                               m
                                               wire speed                  1.9 - 19 m / min
                                               iron, stainless steel welding wire φ mm
                                               m                                    0.6÷1.6
                                               mdegree
                                               protection                  IP 23
                                               m
                                               application                 semiautomatic electric welding in protective
                                                                           atmosphere with fusible electrode of the
                                                                           following materials:
                                                                                        low-alloy steel: 1÷10 mm
                                                                                        stainless steel:1÷10 mm
                                               m year
                                               manufacture                 2000 ESAB Sweden




                                Corner welding of 2 overlapped sheets
                                of 1.5 mm thickness




                                             End to end welding of 2 sheets
                                                         of 2 mm thickness
WELDING ASSEMBLING LINE

 4622 N TECNA DOT WELDING EQUIPMENT WITH MICROPROCESSOR



                                           m drive
                                           pneumatic
                                           m
                                           maximal short-circuit power                            104 kVA
                                           m
                                           maximal short-circuit current                          21 kA
                                           m
                                           TE-180 welding microprocessor with 15 programs
                                           m
                                           application              dot welding of the following materials:
                                                                     w (pickled, galvanized, stainless steel,
                                                                       sheet
                                                                       nickel silver) of maximal thickness 4 + 4 mm
                                                                     w 1.5 + 1.5 mm max.
                                                                       brass,
                                                                       round, 12 + φ
                                                                     w φ 12 mm max.
                                           m year
                                           manufacture               1998
                                                                     2000 - TECNA Italy


                             Dot welding of 2 iron sheets
                             of 1.5 mm thickness




                                  Dot welding of 2 iron sheets
                                  of 3 mm thicknee




KES 1600 - PMK 20 STORED ENERGY PRESSURE WELDING EQUIPMENT FOR THREADED BOLTS



                                            m
                                            power source              66,000µ   F capacitor
                                            m
                                            welding frequency         25 bolts/min max.
                                            m
                                            welding time              1 - 3 msec
                                            m
                                            application               welding of bolts made of copper covered
                                                                      steel, stainless steel, AlMg3, (M3 - M8)
                                            m
                                            basic material to be welded - steel, stainless steel, aluminium
                                            m year
                                            manufacture               1999 KOCO Germany




                            Stored energy welding of
                            a copper covered steel bolt on
                            iron sheet




                                              Stored energy welding of
                                              an AlMg3 bolt on Al 99 sheet
   PLASTIC INJECTION MOULDING LINE



  ENGEL CL DUO 7050/1000 PLASTIC INJECTION MOULDING MACHINE

                                                   Application: for high precision injection of technical parts,
                                                   consumer goods with large volume, stoppers
                                                   m  grams                                  4150 g
                                                   m clamping force                          10000 KN
                                                   m  injection pressure                     2090 bar
                                                   m screw
                                                      plasticating                           105 mm
                                                   m height
                                                      minimal tool                           600 mm
                                                   m opening
                                                      maximal tool                           1200 mm
                                                   m  table dimensions                       2000 x 1830 mm
                                                   m  distance between columns               1400 x 1150 mm
                                                   m  robots
                                                   m  thermostatting equipment
                                                   m drying of materials
                                                      automatic
                                                   m  material proportioning devices
                                                   mbelts
                                                      conveyor
                                                   mcores
                                                      hydraulic
                                                   m  air valve
                      AIR INLET GRILLE for Logan   m  control zones of hot blocks
                      Material: polypropylene      m year
                                                      manufacture                            2004
                      Number of cavities: 2        m  injected materials:
                                                   ABS, PC, PC with 30% max. fiber glass, PA 6.0, PA 6.6, PA with
                                                   30% max. fiber glass, PPO, PS, POM, PE, PP, PMMA, TPE,
                                                   poly-phenylene oxide




FEROMATIC Magma 550 DOUBLE-SHOT PLASTIC INJECTION MOULDING MACHINE

                                                     m grams                           3 kg
                                                     m clamping force                  5500 kN
                                                     m consumption                     37 kW
                                                     m height
                                                       minimal tool                    536 mm
                                                     m height
                                                       maximal tool                    1676 mm
                                                     m table dimensions                870 x 870 mm
                                                     m year
                                                       manufacture                     2002
                                                     m injected materials
                                                     ABS, PC, PC with 30% max. fibre glass, PA 6.0, PA 6.6, PA with 30%
                                                     max. fibre glass, PPO, PS, POM,PE, PP, PMMA, TPE.




                                                                       SUN VISIOR for Logan
                                                                       Material: polypropylene
                                                                       Number of cavities: 1
PLASTIC INJECTION MOULDING LINE


ENGEL CL 2550/500 SL PLASTIC INJECTION MOULDING MACHINE
                                             Application: for high precision injection of technical parts,
                                             consumer goods with large volume, stoppers
                                             m  grams                                  1550 g
                                             m clamping force                          5000 KN
                                             m  injection pressure                     1640 bar
                                             m screw
                                                plasticating                           80 mm
                                             m height
                                                minimal tool                           250 mm
                                             m opening
                                                maximal tool                           750 mm
                                             m  table dimensions                       1200 x 1350 mm
                                             m  distance between columns               840 x 840 mm
                                             m  robots
                                             m  thermostatting equipment
                                             m drying of materials
                                                automatic
                                             m  material proportioning devices
                                             mbelts
                                                conveyor
                                             mcores
                                                hydraulic
                                             m  air valve
                                             m  control zones of hot blocks
                                             m year
                                                manufacture                            2004
              LOWER GRILLE for Logan         m  injected materials:
              Material: polypropylene        ABS, PC, PC with 30% max. fiber glass, PA 6.0, PA 6.6, PA with
              Number of cavities: 1          30% max. fiber glass, PPO, PS, POM, PE, PP, PMMA, TPE,
                                             poly-phenylene oxide



  ENGEL CL 2550/350 PLASTIC INJECTION MOULDING MACHINE

                                                    Application: for high precision injection of technical parts,
                                                    consumer goods with large volume, stoppers
                                                    m  grams                                  1550 g
                                                    m  clamping force                         3500 KN
                                                    m   injection pressure                    1640 bar
                                                    m screw
                                                        plasticating                          80 mm
                                                    m height
                                                        minimal tool                          250 mm
                                                    m opening
                                                        maximal tool                          660 mm
                                                    m   table dimensions                      1090 x 1185 mm
                                                    m   distance between columns              735 x 735 mm
                                                    m   robots
                                                    m   thermostatting equipment
                                                    m drying of materials
                                                        automatic
                                                    m   material proportioning devices
                                                    mbelts
                                                        conveyor
                                                    mcores
                                                        hydraulic
                                                    m   air valve
                            DOUBLURE for Logan
                            Material: polypropylene
                                                    m   control zones of hot blocks
                            Number of cavities: 1 m     manufacture year                      2004
                                                    m   injected materials:
                                                    ABS, PC, PC with 30% max. fiber glass, PA 6.0, PA 6.6, PA
                                                    with 30% max. fiber glass, PPO, PS, POM, PE, PP, PMMA,
                                                    TPE, poly-phenylene oxide
    PLASTIC INJECTION MOULDING LINE

     ENGEL ES 1350/275 HL SL PLASTIC INJECTION MOULDING MACHINE
                                                              Application: for high precision injection of technical parts,
                                                              consumer goods with large volume, stoppers
                                                              m  grams                                  620 g
                                                              m clamping force                          2750 KN
                                                              m  injection pressure                     2189 bar
                                                              m screw
                                                                 plasticating                           55 mm
                                                              m height
                                                                 minimal tool                           350 mm
                                                              m opening
                                                                 maximal tool                           850 mm
                                                              m  table dimensions                       1050 x 650 mm
                                                              m  distance between columns               without tie bars
                                                              m  robots
                                                              m  thermostatting equipment
                                                              m drying of materials
                                                                 automatic
                                                              m  material proportioning devices
                                                              mbelts
                                                                 conveyor
                                                              mcores
                                                                 hydraulic
                                                              m  air valve
                                      CASE - SIDLER
                                                              m  control zones of hot blocks
                                      Material: PC+ABS        m year
                                                                 manufacture                            2004
                                      Number of cavities: 2   m  injected materials:
                                                              ABS, PC, PC with 30% max. fiber glass, PA 6.0, PA 6.6, PA with
                                                              30% max. fiber glass, PPO, PS, POM, PE, PP, PMMA, TPE,
                                                              poly-phenylene oxide




FEROMATIC K 250 - K 275 DOUBLE-SHOT PLASTIC INJECTION MOULDING MACHINE

                                                              m grams                           723 g
                                                              m clamping force                  2750 kN
                                                              m consumption                     10 kW
                                                              m height
                                                                minimal tool                    350 mm
                                                              m height
                                                                maximal tool                    1200 mm
                                                              m table dimensions                970 x 970 mm
                                                              m distance between columns        630 x 630 mm
                                                              m year
                                                                manufacture                     1999
                                                              m injected materials
                                                              ABS, PC, PC with 30% max. fibre glass, PA 6.0, PA 6.6, PA with 30%
                                                              max. fibre glass, PPO, PS, POM,PE, PP, PMMA, TPE.




  Subassembly for telecommunications accessories
  Material: Polycarbonate                                                         BOX+COVER - Dopka
  Number of cavities: 1                                                           Material: Polycarbonate
  Pointlike injection system and distribution channels                            Number of cavities: 1
PLASTIC INJECTION MOULDING LINE

ENGEL 700/150 HORIZONTAL PLASTIC INJECTION MOULDING MACHINES
                                              m grams                                    450 g
                                              m clamping force                           1450 kN
                                              m injection pressure                       1910 bar
                                              m screw
                                                plasticating                             50 mm
                                              m consumption                              77.7 kW
                                              m height
                                                minimal tool                             150 mm
                                              m height
                                                maximal tool                             460 mm
                                              m table dimensions                         750 x 700 mm
                                              m distance between columns                 510 x 510 mm
                                              m working system
                                                heater heads
                                              m devices
                                                proportioning
                                              m mill
                                              m grains aspirator
                                              m year
                                                manufacture                              1998
                                              m injected materials
                                              ABS, PC, PA 6.0, PA 6.6, PPO, PS, POM,PE, PP, PMMA, TPE.




                                                                     HOUSING - Siemens
                                                                     Material: NORYL
                                                                     Number of cavities: 1




ENGEL 650/125 HORIZONTAL PLASTIC INJECTION MOULDING MACHINES
                                              m grams                                    220 g
                                              m clamping force                           1200 kN
                                              m injection pressure                       2040 bar
                                              m screw
                                                plasticating                             45 mm
                                              m consumption                              35.5 kW
                                              m height
                                                minimal tool                             250 mm
                                              m height
                                                maximal tool                             600 mm
                                              m table dimensions                         700 x 500 mm
                                              m distance between columns                 no columns
                                              m heater heads working system
                                              m devices
                                                proportioning
                                              m mill
                                              m grains aspirator
                                              m year
                                                manufacture                              1998
                                              m injected materials
                                              ABS, PC, PA 6.0, PA 6.6, PA, PPO, PS, POM,PE, PP, PMMA, TPE.
                              Measurement device part
                              Material: Fireproof and UV resistant
                                         polycarbonate
                              Number of cavities: 1
                              Direct injection moulding




                                                  HOUSING - ABB
                                                  Material: PA 6A GF 20%
                                                  Number of cavities: 4
PLASTIC INJECTION MOULDING LINE

ENGEL 500/120 HORIZONTAL PLASTIC INJECTION MOULDING MACHINES
                                              m grams                                    250 g
                                              m clamping force                           1200 kN
                                              m injection pressure                       2040 bar
                                              m screw
                                                plasticating                             40 mm
                                              m consumption                              27.5 kW
                                              m height
                                                minimal tool                             250 mm
                                              m height
                                                maximal tool                             500 mm
                                              m table dimensions                         420 x 736 mm
                                              m distance between columns                 no columns
                                              m heater heads working system
                                              m devices
                                                proportioning
                                              m mill
                                              m grains aspirator
                                              m year
                                                manufacture                              1998
                                              m injected materials
                                              ABS, PC, PC with 30% max. fibre glass, PA 6.0, PA 6.6, PA with
                                              30% max. fibre glass, PPO, PS, POM, PE, PP, PMMA, TPE.




                                                                         LAMP LENS - SIDLER
                                                                         Material: Polycarbonate
                                                                         Number of cavities: 2




ENGEL 330/110 HORIZONTAL PLASTIC INJECTION MOULDING MACHINES

                                               m grams                                    146 g
                                               m clamping force                           1100 kN
                                               m injection pressure                       2400 bar
                                               m screw
                                                 plasticating                             35 mm
                                               m consumption                               25 kW
                                               m height
                                                 minimal tool                             250 mm
                                               m height
                                                 maximal tool                             750 mm
                                               m table dimensions                         730 x 420 mm
                                               m distance between columns                 no columns
                                               m heater heads working system
                                               m devices
                                                 proportioning
                                               m mill
                                               m grain aspirators
                                               m year
                                                 manufacture                               2000
                                               m injected materials
                                               ABS, PC, PC with 45 % max. fibre glass, PA 6.0, PA 6.6, PA with 45%
                                               max. fibre glass, PPO, PS, POM,PE, PP, PMMA, TPE.
                             Modular connector part
                             Material: Polycarbonate
                             Number of cavities: 4
                             Injection system with hot injection nozle
                             and hydraulic locking




                                                   Modular connector part
                                                    Material: Polycarbonate
                                                      Number of cavities: 4
                                    Injection system with hot injection nozle
                                                         and tunnel channel
PLASTIC INJECTION MOULDING LINE

ENGEL 330/90 HORIZONTAL PLASTIC INJECTION MOULDING MACHINES

                                              m grams                           100 g
                                              m clamping force                  900 kN
                                              m injection pressure              2400 bar
                                              m screw
                                                plasticating                    30 mm
                                              m consumption                     20 kW
                                              m height
                                                minimal tool                    250 mm
                                              m height
                                                maximal tool                    750 mm
                                              m table dimensions                730 x 420 mm
                                              m distance between columns        no columns
                                              m working system
                                                heater heads
                                              m devices
                                                proportioning
                                              m mill
                                              m grains aspirator
                                              m year
                                                manufacture                     2000
                                              m injected materials
                                              ABS, PC, PC with 45% max. fibre glass, PA 6.0, PA 6.6, PA with 45%
                                              max. fibre glass, PPO, PS, POM,PE, PP, PMMA, TPE.

                              CASE - SIDLER
                              Material: PC+ABS
                              Number of cavities: 1




                                   Connecting elements subassemblies
                                                 Material: Polycarbonate
                                                   Number of cavities: 2
                                                Direct injection moulding


ENGEL 330/70 HORIZONTAL PLASTIC INJECTION MOULDING MACHINES

                                              m  grams                            110 g
                                              m  clamping force                   750 kN
                                              m  injection pressure               2400 bar
                                              m screw
                                                 plasticating                     35 mm
                                              m  consumption                      25 kW
                                              m height
                                                 minimal tool                     200 mm
                                              m height
                                                 maximal tool                     450 mm
                                              m  table dimensions                 660 x 400 mm
                                              m  distance between columns         no columns
                                              m  heater heads working system
                                              m devices
                                                 proportioning
                                              m  mill
                                              m  grain aspirators
                                              m year
                                                 manufacture                      1998
                                              m  injected materials
                                              ABS, PC, PC with 30% max. fibre glass, PA 6.0, PA 6.6, PA with 30% max.
                                              fibre glass, PPO, PS, POM, PE, PP, PMMA, TPE.

                               SLIDE - ABB
                               Material: PA66 GF 25%
                               Number of cavities: 4


                                                               Relay socket
                                                    Material: Polyamide 6.0
                                                      Number of cavities: 4
                                        Pointlike injection system and with
                                                       distribution channels
PLASTIC INJECTION MOULDING LINE

ENGEL 80/25 HORIZONTAL PLASTIC INJECTION MOULDING MACHINES

                                               m grams                                    35 g
                                               m clamping force                           250 kN
                                               m injection pressure                       2200 bar
                                               m screw
                                                 plasticating                             22 mm
                                               m consumption                              10 kW
                                               m height
                                                 minimal tool                             150 mm
                                               m height
                                                 maximal tool                             330 mm
                                               m table dimensions                         380 x 432 mm
                                               m distance between columns                 260 x 260 mm
                                               m heater heads working system
                                               m devices
                                                 proportioning
                                               m mill
                                               m grains aspirator
                                               m year
                                                 manufacture                              1996
                                               m injected materials
                                               ABS, PC, PC with 30% max. fibre glass, PA 6.0, PA 6.6, PA with 30%
                                               max. fibre glass, PPO, PS, POM,PE, PP, PMMA, TPE.

                          Automotive subassemblies
                          Material: Polyamide 6.6
                          Number of cavities: 4 + 4
                          Injection system with tunnel channel




                                       Accessories for connecting elements
                                                       Material: Polycarbonate
                                                         Number of cavities: 8
                                          Injection system with tunnel channel



ENGEL 80/25 VERTICAL PLASTIC INJECTION MOULDING MACHINES
                                            m  grams                                     35 g
                                            m  clamping force                            250 kN
                                            m  injection pressure                        2200 bar
                                            m screw
                                               plasticating                              22 mm
                                            m  consumption                               10 kW
                                            m height
                                               minimal tool                              150 mm
                                            m height
                                               maximal tool                              330 mm
                                            m  table dimensions                          380 x 432 mm
                                            m  distance between columns                  260 x 260 mm
                                            m  cooling installation
                                            m working system
                                               heater heads
                                            m devices
                                               proportioning
                                            m  mill
                                            m  grains aspirator
                                            m year
                                               manufacture                               1993
                                            m   injected materials
                                            ABS, polycarbonate, polyamide 6.0, polyamide 6.6,
                                            shock resistant polystyrene, general purpose polystyrene, thermoplastic
                                            elastomers, high density polyethylene, low density polyethylene,
                                            polyoxymethylene, polyoxyphenylene
                          Telephony subassemblies
                          Material: ABS
                          Number of cavities: 16
                          Injection system through distribution channels


                                                        STOPPER+LAMELLA
                                                       Material: PA 6A GF 20%
                                                                 Nr cuiburi: 8+2
PLASTIC INJECTION MOULDING LINE

ENGEL 80/25 HORIZONTAL PLASTIC INJECTION MOULDING MACHINES

                                               m grams                                    35 g
                                               m clamping force                           250 kN
                                               m injection pressure                       2200 bar
                                               m screw
                                                 plasticating                             22 mm
                                               m consumption                              10 kW
                                               m height
                                                 minimal tool                             150 mm
                                               m height
                                                 maximal tool                             330 mm
                                               m table dimensions                         380 x 432 mm
                                               m distance between columns                 260 x 260 mm
                                               m heater heads working system
                                               m devices
                                                 proportioning
                                               m mill
                                               m grains aspirator
                                               m year
                                                 manufacture                              1996
                                               m injected materials
                                               ABS, PC, PC with 30% max. fibre glass, PA 6.0, PA 6.6, PA with 30%
                                               max. fibre glass, PPO, PS, POM,PE, PP, PMMA, TPE.

                          Automotive subassemblies
                          Material: Polyamide 6.6
                          Number of cavities: 4 + 4
                          Injection system with tunnel channel




                                       Accessories for connecting elements
                                                       Material: Polycarbonate
                                                         Number of cavities: 8
                                          Injection system with tunnel channel



ENGEL 80/25 VERTICAL PLASTIC INJECTION MOULDING MACHINES
                                            m  grams                                     35 g
                                            m  clamping force                            250 kN
                                            m  injection pressure                        2200 bar
                                            m screw
                                               plasticating                              22 mm
                                            m  consumption                               10 kW
                                            m height
                                               minimal tool                              150 mm
                                            m height
                                               maximal tool                              330 mm
                                            m  table dimensions                          380 x 432 mm
                                            m  distance between columns                  260 x 260 mm
                                            m  cooling installation
                                            m working system
                                               heater heads
                                            m devices
                                               proportioning
                                            m  mill
                                            m  grains aspirator
                                            m year
                                               manufacture                               1993
                                            m   injected materials
                                            ABS, polycarbonate, polyamide 6.0, polyamide 6.6,
                                            shock resistant polystyrene, general purpose polystyrene, thermoplastic
                                            elastomers, high density polyethylene, low density polyethylene,
                                            polyoxymethylene, polyoxyphenylene
                          Telephony subassemblies
                          Material: ABS
                          Number of cavities: 16
                          Injection system through distribution channels


                                                        STOPPER+LAMELLA
                                                       Material: PA 6A GF 20%
                                                                 Nr cuiburi: 8+2
PLASTIC INJECTION MOULDING LINE


  BATTENFELD TM 2100/1000 PLASTIC INJECTION MOULDING MACHINE

                                                m  grams                               450 g
                                                m clamping force                       2100 KN
                                                m  injection pressure                  2500 bar
                                                m height
                                                   minimal tool                        250 mm
                                                m opening
                                                   maximal tool                        600 mm
                                                m  table dimensions                    840 x 900 mm
                                                m  distance between columns            570 x 570 mm
                                                m  robots
                                                m  thermostatting equipment
                                                m drying of materials
                                                   automatic
                                                m  material proportioning devices
                                                mbelts
                                                   conveyor
                                                mcores
                                                   hydraulic
                                                m  air valve
                                                m  control zones of hot blocks
                                                m year
                                                   manufacture                         2004
                                                m  injected materials:
                                                ABS, PC, PC with 30% max. fiber glass, PA 6.0, PA 6.6, PA with
                                                30% max. fiber glass, PPO, PS, POM, PE, PP, PMMA, TPE,
                                                poly-phenylene oxide




                                                  Case for Logan
                                                  Material: polypropylene
                                                  Number of cavities: 2



BATTENFELD HM 500/5100 PLASTIC INJECTION MOULDING MACHINE
                                                m  grams                               450 g
                                                m clamping force                       2100 KN
                                                m  injection pressure                  2500 bar
                                                m height
                                                   minimal tool                        250 mm
                                                m opening
                                                   maximal tool                        600 mm
                                                m  table dimensions                    840 x 900 mm
                                                m  distance between columns            570 x 570 mm
                                                m  robots
                                                m  thermostatting equipment
                                                m drying of materials
                                                   automatic
                                                m  material proportioning devices
                                                mbelts
                                                   conveyor
                                                mcores
                                                   hydraulic
                                                m  air valve
                                                m  control zones of hot blocks
                                                m year
                                                   manufacture                         2007
                                                m  injected materials:
                                                ABS, PC, PC with 30% max. fiber glass, PA 6.0, PA 6.6, PA with
                                                30% max. fiber glass, PPO, PS, POM, PE, PP, PMMA, TPE,
                                                poly-phenylene oxide


                                                  SUN VISIOR for Logan
                                                  Material:polypropylene
                                                  Number of cavities: 1

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:49
posted:3/23/2011
language:English
pages:27