SHAPER CUTTERS SETS

Document Sample
SHAPER CUTTERS SETS Powered By Docstoc
					                                                                   SHAPER CUTTERS & SETS




Note: Machine safety guards have been removed for photo clarity.




               Note: Machine safety guards have been removed for photo clarity.




                                                                                      137
SHAPER CUTTERS & SETS
      SHAPER CUTTERS
      CARBIDE-TIPPED SHAPER                                                       CORNER ROUND/COVE
      CUTTERS                                                                     3/4" Bore with 1/2" Bushings
      3-Wing / for 1/2" & 3/4" Arbor Shapers
                                                                                                                             D
          Over 100 different cutters for all your shaping needs.                                                              d
      Extra-thick carbide tips offer many resharpenings and                                        R1
      longer tool life. RPM rating: 12,000 and under.


                                                                                              B
      All cutters furnished with 3/4" bore and two removable 1/2" x 3/4"
      ‘T’-bushings, unless stated otherwise.
                                                                                                    R2


                                                                                                                             D1
      STRAIGHT EDGE
      3/4" Bore with 1/2" Bushings
                                           D
                                           d


            B




                                                                                   Tool No. Description       D      D1       B     R1      R2      d
                                Tool No.         D        B           d             950     Corner round    2-5/8     2     15/16   1/2    5/16 1/2 & 3/4
                               **917           3-1/8     1/4      1/2 & 3/4                    & cove
                                *918           2-5/8     1/4      1/2 & 3/4
                                *953           2-5/8     3/8      1/2 & 3/4                                                 D
                            NEW 948            2-1/2     1/2      1/2 & 3/4                                                  d
                                 954           2-5/8     1/2      1/2 & 3/4
                                                                                              R1
                                 912           2-5/8     3/4      1/2 & 3/4
                                 955           2-5/8      1       1/2 & 3/4
                                 956           2-5/8    1-1/2     1/2 & 3/4
                                                                                         B
                                                                                              R2
      CORNER ROUND
      3/4" Bore with 1/2" Bushings
                                            D
                                            d
                  R1



              B

                       R2



                                           D1
                                                                                   Tool No.       Description         D       B     R1     R2        d
                                                                                    951           Cove & bead       2-5/8     1     3/8   5/16   1/2 & 3/4




                                                                                  Replacement ‘T’-bushing(s) #BU-550
       Tool No. Description       D    D1     B        R1       R2        d       *Due to size, furnished with only one 1/2" x 3/4" bushing.
        905     Corner round    2-5/8 1-5/8 15/16      1/4      1/2   1/2 & 3/4   **Cabinet set replacement cutter, no bushing is furnished.

      Products shown in Bold indicate most popular items.                         For rub collars & ‘T’ bushings, please see page 150.
138
                                                                          SHAPER CUTTERS & SETS
                                                                                                            SHAPER CUTTERS
    CORNER ROUND/BEAD                                                     BULLNOSE
    3/4" Bore with 1/2" Bushings                                          3/4" Bore with 1/2" BushingS
                                                                                                                    D1
                                   D1
                                                                                                                    D
                                    D
                                                                                                                    d
                                    d


             R1
                                                                              B1 B
                                                                                        R
    B
        R2


        R3




                                                                           Tool No.   Description     D      D1       B      B1     R         d
                                                                           *973       1/4 bead      2-5/8   2-3/8    1/4    9/16   1/8    1/2 & 3/4
                                                                            974       3/8 bead      2-5/8   2-1/4    3/8     5/8  3/16    1/2 & 3/4
                                                                            925       1/2 bead      2-5/8   2-1/8    1/2   13/16 1/4      1/2 & 3/4
                                                                            927       3/4 bead      2-5/8   1-7/8    3/4   1-1/16 3/8     1/2 & 3/4
                                                                            929        1 bead       2-5/8   1-5/8     1    1-1/2 1/2      1/2 & 3/4


                                                                          STAIR TREAD
                                                                          3/4" Bore with 1/2" Bushings
     Tool No. Description      D    D1     B   R1 R2 R3        d
                                                                                                                     D1
      952    Corner round    2-5/8 1-7/8 15/16 3/8 1/8 1/8 1/2 & 3/4
                & bead                                                                                               D
                                                                                                                     d
    CORNER ROUND
    3/4" Bore with 1/2" Bushings

                                   D
                                                                          B1 B            R
                                   d



        R
B




                                   D1




                                                                           Tool No. Description   D          D1        B    B1      R         d
                                                                            932     Stair tread 3-3/8       1-7/8    1-1/8 1-1/2   9/16   1/2 & 3/4
                                                                                      nosing
              Tool No. Description    D      D1     B    R        d
               959     Corner round 3-5/8   2-1/8   1   3/4   1/2 & 3/4
                                                                          Replacement ‘T’-bushing(s) #BU-550
                                                                          *Due to size, furnished with only one 1/2" x 3/4" bushing.
    Products shown in Bold indicate most popular items.                   For rub collars & ‘T’ bushings, please see page 150.
                                                                                                                                                      139
SHAPER CUTTERS & SETS
      SHAPER CUTTERS
      FLUTE (CONVEX)                                                                  CROWN MOLDING
      3/4" Bore with 1/2" Bushings                                                    3/4" Bore with 1/2" Bushings
                                            D
                                                                                                                                               D
                                            d
                                                                                                                                               d

                                                                                                                 a°
        B R
                                                                                                                              R2
                                                                                                                 a°
                                                                                                       B
                                                                                                           R1


                                                                                                                 a°

                   Tool No. Description D               B        R            d
                   *971        Flute   2-5/8           1/4      1/8       1/2 & 3/4    Tool No. Description    D                B     a°     R1         R2     R3    d
                   *972        Flute   2-5/8           3/8     3/16       1/2 & 3/4     962    Crown Molding 2-3/4            2-1/4   45°    1/2       3/16    — 1/2 & 3/4
                    926        Flute   2-5/8           1/2      1/4       1/2 & 3/4
                    928        Flute   2-5/8           3/4      3/8       1/2 & 3/4
                    930        Flute   2-5/8            1      1/2        1/2 & 3/4
                                                                                      MULTI-FORM
      OGEE PATTERNS                                                                   3/4" Bore with 1/2" Bushings
      3/4" Bore with 1/2" Bushings                                                                                                                     D
                                                                                                                                                   D2
                                            D                                                                                                      d
                                                                                                                         R3
                                            d
                                                                                                                R2


           B                                                                                            B
                B1 R1
                                                                                                            R2
                  R2
                                                                                                                 R1




                                                                                       Tool No. Description        D    D2     B             R1         R2    R3        d
                                                                                        965     Multi-form       3-1/2 2-7/8 1-7/8           1/4       5/16   3/8   1/2 & 3/4


       Tool No. Description     D      B         B1      R1        R2         d
        906        Ogee       2-5/8   3/4        1/2     1/4       1/4    1/2 & 3/4
                                                                                      MOLDING
                                            D
                                                                                      3/4" Bore with 1/2" Bushings
                                            d
                                                                                                                                                   D
                                                                                                                         R3                    d
           R1     R2
  B
      B1
                                                                                                                 R2

                                                                                                      B
                                                                                                            R2
                                            D1
                                                                                                            R1




                                                                                       Tool No. Description          D          B      R1       R2            R3        d
                                                                                        966      Molding             3        1-3/4    1/8     5/32           1/4   1/2 & 3/4
       Tool No. Description   D    D1           B      B1    R1       R2      d
        958     Ogee & bead 3-1/4 2-1/8         1      3/4   1/8      1/2 1/2 & 3/4
                 table edge
                                                                                      Replacement ‘T’ bushing(s) #BU-550.
      Products shown in Bold indicate most popular items.                             For rub collars & ‘T’ bushings, please see page 150.
140
                                                                                               SHAPER CUTTERS & SETS
                                                                                                           SHAPER CUTTERS
 CROWN MOLDING                                                                                 JOINERY CUTTERS
 3/4" Bore with 1/2" Bushings                                                                  3/4" Bore with 1/2" Bushings
                                                                                                                                           D
                                                                                                                                           d
                                                       D
                                                      D2
                                                       d
                                                                                                           B B1


                     R
                 B


                                                                                                                                          D1
                        a°



       Tool No. Description    D   D2                 B      a°           R1           d
        967    Crown molding 3-1/4 —                2-1/4    45°         1-1/4     1/2 & 3/4
                                                                                                Tool No. Description        D      D1       B       B1         d
                                                                                                 903    Wedge tongue      2-5/8    2      15/16    11/32   1/2 & 3/4

 RAISED PANEL BACK CUTTER                                                                                                                 D
                                                                                                                                          d
 3/4" Bore with 1/2" Bushings
 With Ball Bearing Rub Collar

                                                                                                           B B1
                                                       D
                    R                                  d

                B


                                                                                                                                          D1




             Tool No. Description D                     B           R                d
              980     Back cutter 3-1/2                1/2         1/4           1/2 & 3/4      Tool No. Description        D      D1       B       B1         d
                                                                                                 904    Wedge groove      2-5/8    2      15/16    11/32   1/2 & 3/4
                                                                                                                                          D1
 WINDOW SASH                                                                                                                               D
                                                                                                                                           d
 3/4" Bore with 1/2" Bushings
 With Ball Bearing Rub Collar
                                                       D
                                                       d                                                   B B1


                         B3

                B
                     B1          R

                     B2

                     B1




                                                                                                Tool No.    Description     D      D1       B       B1         d
Tool No. Description         D         B      B1      B2      B3           R      d
                                                                                                 911         Glue joint   2-5/8   2-1/4   1-3/16    3/8    1/2 & 3/4
 939     Window Sash         2       1-5/8   5/16     3/8     5/8         1/4 1/2 & 3/4

                                                                                               Replacement ‘T’ bushing(s) #BU-550.
 Products shown in Bold indicate most popular items.                                           For rub collars & ‘T’ bushings, please see page 150.
                                                                                                                                                                       141
SHAPER CUTTERS & SETS
         SHAPER CUTTERS
         JOINERY CUTTERS                             (CONT’D)                     JOINERY CUTTERS                                (CONT’D)
         3/4" Bore with 1/2" Bushings                                             3/4" Bore with 1/2" Bushings
                                                                                                                                   D1
                                         D                                                                                         D
                                         d                                                                                          d


          B R

                                                                                                    B


                                         D1                                                                         B1
                                     Tool #975




                                         D
                                         d
                  R
              B
                                                                                                         L
                                                                                   Tool No. Description            D      D1     B    B1         L      d
                                                                                    999     Finger joint         2-7/8   2-1/8 1-1/2 11/32      3/8 1/2 & 3/4

                                                                                                                                   D1
                                                                                                                                   D
                                     Tool #976                                                                                      d



                  Tool No. Description     D      D1          B   R      d                     B B1
                   975     Female sash   2-5/8   2-1/8       5/8 1/8 1/2 & 3/4
                   976      Male sash    2-5/8   2-1/8       5/8 1/8 1/2 & 3/4

                                         D1
                                         D
                                         d



                                                                                           Tool No. Description            D    D1       B     B1       d
B                                                                                           933     Drawer joint         2-5/8 2-3/8    3/4   11/32 1/2 & 3/4
         B1
                                                                                  DOOR LIP
                                                                                  3/4" Bore with 1/2" Bushings
                                                                                                                                   D
    a°                                                                                         a°                                  d


                                                                                                    B1
                                                                                           B
                                                                                                             R




                                                                                                                                   D1




                                                                                  Tool No. Description     D     D1       B     B1 R            a°      d
          Tool No. Description     D     D1      B     B1       a°        d        900     Corner round 2-5/8 1-3/4 1-3/16 5/8 3/8              10° 1/2 & 3/4
           998     Lock miter    3-3/4    2      1     3/8      45°   1/2 & 3/4           & rabbet (counter-clockwise, rabbet up)
                                                                                  Replacement ‘T’ bushing(s) #BU-550.
         Products shown in Bold indicate most popular items.                      For rub collars & ‘T’ bushings, please see page 150.
142
                                                                               SHAPER CUTTERS & SETS
                                                                                                             SHAPER CUTTERS
DOOR LIP                         (CONT’D)                                      DOOR LIP              (CONT’D)

3/4" Bore with 1/2" Bushings                                                   3/4" Bore with 1/2" Bushings
                                               D                                                                           D
                                               d                                                                           d



                         R
       B
                                                                                        B
               B1


               a°

                                               D1
                                                                                                                       D1




                                                                                                Tool No. Description     D            D1           B     d
Tool No. Description     D     D1      B      B1    R a° d                                       993     Ogee & Cove   2-5/8         1-1/2         1 1/2 & 3/4
 901    Corner round 2-5/8 1-3/4 1-1/4 11/16 3/8 10° 1/2 & 3/4
        & taper rabbet (counter-clockwise, rabbet down)                        90° ‘V’ GROOVE
                                                    D                          3/4" Bore with 1/2" bushings
                                                    D1                                                                         D
                                                    d                                                                          d
                                                                                                    a°

                             R
           B                                                                                B

                    B1



                a°

                                                                                            Tool No. Description  D              B           a°          d
                                                                                             957 90° ‘V’ Groove 2-5/8          15/16         45°     1/2 & 3/4




 Tool No. Description     D     D1      B      B1    R a°      d               30° BEVEL
  991    Corner round 2-5/8 2           1     7/16 1/8 10° 1/2 & 3/4           3/4" Bore with 1/2" bushings
         & taper rabbet (counter-clockwise, rabbet down)                                                                       D
                                                                                                                               D1
                                               D                                                                               d
                                               D1
                                               d
                                                                                                    a°
                                                                                            B
   B
           B1




   Tool No. Description    D                 D1          B    B1       d          Tool No. Description      D       D1           B       a°             d
    992     Corner Round 2-5/8              2-1/4        1   13/16 1/2 & 3/4       977      30° Bevel     2-5/8    1-3/8         1       30°        1/2 & 3/4
              and Ogee
                                                                               Replacement ‘T’ bushing(s) #BU-550.
Products shown in Bold indicate most popular items.                            For rub collars & ‘T’ bushings, please see page 150.                              143
SHAPER CUTTERS & SETS
       SHAPER CUTTERS
       CLASSICAL                                                                TRIPLE FLUTE
       3/4" Bore with 1/2" Bushings                                             3/4" Bore with 1/2" Bushings
                                           D
                                           d                                                                            D
                                                                                                                        d



           B

                                                                                      B B1 R




                                           D1



                              Tool No.       D        D1       B        d
                               964         2-5/8       2       1    1/2 & 3/4


       COVE & BEAD
       3/4" Bore with 1/2" Bushings                                                            Tool No.      D      B       B1     R         d
                                         D                                                      960        2-5/8    1       5/8   5/64   1/2 & 3/4
                                         d



   B B1 R                                                                       TRIPLE BEAD
               R
                                                                                3/4" Bore with 1/2" Bushings
                                                                                                                        D
                                         D1                                                                             d




                                                                                 B   B1 R


                   Tool No.   D     D1           B    B1      R       d
                    968       3    1-3/4        3/4   1/2   15/64 1/2 & 3/4

       OGEE
       3/4" Bore with 1/2" Bushings
                                         D
                                         d




B B1
          R
                                                                                                Tool No.     D      B       B1     R         d
                                                                                                 961       2-5/8    1       5/8   5/64   1/2 & 3/4

                                         D1




                                                                                Replacement ‘T’ bushing(s) #BU-550.
                   Tool No. D     D1             B    B1      R        d        For rub collars & ‘T’ bushings, please see page 150.
                    969    3-1/4 1-3/4          7/8   3/8    1/2   1/2 & 3/4
       Products shown in Bold indicate most popular items.
144
                                                                      SHAPER CUTTERS & SETS
                                                       SHAPER CUTTERS
                        HORIZONTAL PANEL RAISING / SHEAR FACE
                                                       1-1/4" Bore with 1" Bushings
                                                                         D
                                                      *A                     d


TRADITIONAL                        B1
                           B

                                    R        a°




         Actual Size 931                                                         Tool No. D        B      B1      R      *A     a°       d
Counter-clockwise rotation: Wood face-up                                          931    5-1/2    5/8     3/8    5/32   1-1/2   5°   1 & 1-1/4

                                                                             D
                                                      *A                         d

                                    B1
TRADITIONAL                    B

                                            a°



                                                                                 Tool No. D        B      B1      R      *A     a°      d
         Actual Size 984
                                                                                  984    5-1/2    5/8    5/16     —     1-1/2   15° 1 & 1-1/4

                                                                             D
                                                      *A                         d

                                   B1
                               B
OGEE

                                                  R


                                                                                 Tool No. D        B      B1       R     *A     a°    d
        Actual Size 985                                                           985    5-1/2   11/16   9/32     3/4   1-1/2   — 1 & 1-1/4

                                                                             D
                                                       *A                     d

                                    B1
CLASSICAL                      B
                                             a°
                                        R




                                                                                 Tool No. D        B      B1       R     *A     a°      d
         Actual Size 986
                                                                                  986    5-1/2   11/16   11/32    1/8   1-1/2   12° 1 & 1-1/4

                                                                             D
                                                       *A                            d

                                    B1
COVE                           B



                                                  R

                                                                                 Tool No. D        B      B1       R     *A     a°    d
        Actual Size 987
                                                                                  987    5-1/2   11/16   7/32    1-9/16 1-1/2   — 1 & 1-1/4

*NOTE: Reveal (*‘A’) shown on all above tools reflects the total length of cut. Therefore, you must deduct (usually 3/8") for allowing the
panel to recess into the frame.
Replacement ‘T’ bushings #BU-720 (2 required).
Products shown in Bold indicate most popular items.                     For rub collars & ‘T’ bushings, please see page 150.
                                                                                                                                                 145
SHAPER CUTTERS & SETS
      SHAPER CUTTERS
                VERTICAL PANEL RAISING / SHEAR FACE
                                                          3/4" Bore with 1/2" Bushings
                                                                                                                           D
                                                                                                                      B    d
                                                                                                             R
      TRADITIONAL
                                  Tool No. D        B       R      *A      a°         d
                                   902    2-5/8    9/16    5/32   1-1/2    5°     1/2 & 3/4                   *A



               Actual Size 902
                                                                                                                      a°

                                                                                                                           D
                                                                                                               B           d
                                                                                                             B1
        TRADITIONAL              Tool No. D         B       B1     R       *A       a°      d
                                                                                                             a°
                                  984-VC 3-1/2     5/8     5/16    —      1-5/8     15° 1/2 & 3/4
                                                                                                    *A




              Actual Size 984-VC



                                                                                                                           D
                                                                                                               B           d
                                                                                                             B1
       OGEE                      Tool No. D         B       B1      R      *A        a°    d             R
                                  985-VC 3-1/2    21/32    9/32    3/4    1-5/8      — 1/2 & 3/4
                                                                                                    *A




              Actual Size 985-VC


                                                                                                                           D
                                                                                                                  B        d
                                                                                                    B1
       CLASSICAL                                                                                             a°
                                                                                                                      R
                                 Tool No. D         B       B1      R      *A       a°      d
                                 986-VC 3-1/2     19/32    3/16    1/8    1-5/8     12° 1/2 & 3/4
                                                                                                    *A



              Actual Size 986-VC


                                                                                                                               D
                                                                                                                  B        d
                                                                                                             B1
       COVE                                                                                              R
                                 Tool No. D         B       B1      R     *A         a°    d
                                 987-VC 3-1/2      5/8      1/4   1-9/16 1-5/8       — 1/2 & 3/4
                                                                                                    *A



              Actual Size 987-VC



      *NOTE: Reveal (*‘A’) shown on all above tools reflects the total length of cut. Therefore, you must deduct (usually 3/8") for allowing the
      panel to recess into the frame.
      Replacement ‘T’ bushings #BU-550 (2 required).
      Products shown in Bold indicate most popular items.                     For rub collars & ‘T’ bushings, please see page 150.
146
                                                                                      SHAPER CUTTERS & SETS
                                                                                                                 SHAPER CUTTER SETS
      CABINET SETS
      3/4" Bore with 1/2" Bushings • 3-Wing
      #921
      CABINET MOLDING SET
      with 1/4"W x 3/8"D Tongue & Groove
                    d


                                             R2                                        914
  909
                                             R1                                                           Includes:
918                                                                                     919
                                             R1       B B1                                                 909            Cabinet R.H. female
  910                                                                                  913                 910            Cabinet L.H. female
                                              R2
                                                                                                           913            Cabinet R.H. male
                                                                         D1                                914            Cabinet L.H. male
                                                                         D                                 918            1/4" Straight
                    D1                                                                                     919            Steel spacer
                     D
                                                                                                           BU-550         ‘T’ bushing, 1/2" x 3/4" (4 pcs.)
        Tool No. D           D1       B        B1       R1         R2         d                            BU-900         Sleeve bushing, 1/2" x 3/4" x 1/2" long
         921    2-5/8       1-7/8   1-7/8       1       1/8       5/32    1/2 & 3/4                        BU-930         Sleeve bushing, 1/2" x 3/4" x 1-1/8" long


      #922
      COVE & BEAD SET
      with 1/4"W x 3/8"D Tongue & Groove

                        d

                                                                                      916
  908
                                               R2
917                                          R1                                       919
                                                  B
  907                                       R1
                                               R2                                     915

                                                                                                     Includes:
                                                                         D1                           907         Cove & bead molding L.H.
                    D3                                                   D2                           908         Cove & bead molding R.H.
                    D                                                                                 915         Cove & bead cope L.H.
                                                                                                      916         Cove & bead cope R.H.
                                                                                                      917         1/4" straight
                                                                                                      919         Steel spacer
        Tool No. D     D1     D2              D3     B         R1     R2      d                       BU-550      ‘T’ bushings, 1/2" x 3/4" (4 pcs.)
         922    3-1/8 1-7/8 2-5/16           2-1/8 1-7/8      3/16   5/16 1/2 & 3/4                   BU-920      Sleeve bushing, 1/2" x 3/4" x 1-1/16" long (2 pcs.)


      #940
      CONCAVE STILE & RAIL SET
      with 1/4"W x 3/8"D Tongue & Groove
                        d
                                              R
  941
                                                                                               942

 919                                                                                                917
                                                  B
948
                                                                                              948
                                                                                                     Includes:
                                                                                                      941         Concave stile
                    d1                                                     D                          942         Rail for concave stile
                     D                                                    D1                          948         1/2" straight (2 pcs.)
                                                                                                      917         1/4" straight
                                                                                                      919         Steel spacer
               Tool No.   D           d1         D1        B          R       d                       BU-550      ‘T’ bushing, 1/2" x 3/4" (4 pcs.)
                940     2-1/2        1-7/8      3-1/8    1-5/16      9/32 1/2 & 3/4                   BU-910      Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.)


      Products shown in Bold indicate most popular items.                              For rub collars & ‘T’ bushings, please see page 150.
                                                                                                                                                                        147
SHAPER CUTTERS & SETS
       SHAPER CUTTER SETS
       CABINET SETS (CONT’D)
       3/4" Bore with 1/2" Bushings • 3-Wing
       #945
       CONVEX STILE & RAIL SET
       with 1/4"W x 3/8"D Tongue & Groove

                            d
                                            R                                                 946
             947                                                                                                  Includes:
            919                                                                               917                  946        Convex stile
                                                   B
        948                                                                               948                      947        Rail for convex stile
                                                                                                                   948        1/2" straight (2 pcs.)
                                                                                                                   917        1/4" straight
                        D1                                                D2
                                                                                                                   919        Steel spacer
                        D2                                                D                                        BU-550     ‘T’ bushing, 1/2" x 3/4" (4 pcs.)
                                                                                                                   BU-910     Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.)
            Tool No. D              D1           D2               B        R          d
             945    3-1/8          1-7/8        2-1/2           1-3/8     5/16    1/2 & 3/4


        #994
        Ogee STILE & RAIL SET
        with 1/4"W x 3/8"D Tongue & Groove

                            d
                                              R2
        996                                        R1                                                  995

       919                                                                                                  917
                                                            B
      948                                                                                             948
                                                                                                                  Includes:
                                                                                                                   948        1/2" straight (2 pcs.)
                        D1                                                       D2                                917        1/4" straight
                        D2                                                       D                                 919        Steel spacer
                                                                                                                   995        Ogee stile
                                                                                                                   996        Rail for ogee stile
            Tool No. D           D1         D2           B          R1     R2         d                            BU-550     ‘T’ bushing, 1/2" x 3/4" (4 pcs.)
             994    3-1/8       1-7/8      2-1/2       1-5/16      3/16   5/32    1/2 & 3/4                        BU-910     Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.)



        #938
        ‘V’-PANELING
        2 Piece Set
        with 1/4"W x 3/8"D Tongue & Groove

                            d

                                                   a˚
                                                        B



                        D2                                                D1
                        D1                                                D
                            D

        Tool No.       D            D1           D2               B       a°         d
          938        2-5/8         2-1/4        1-1/2           29/32     45°    1/2 & 3/4




        Products shown in Bold indicate most popular items.                                         For rub collars & ‘T’ bushings, please see page 150.
148
                                                                           SHAPER CUTTERS & SETS
                                                                                                             SHAPER CUTTERS
     REVERSIBLE STILE & RAIL                                               COVE & BEAD
     3-1/2" and 4-1/2" diameter with
     3/16"W and 3/8"D tongue & groove
     stock thickness • 7/8" through 1"                                                                                        D
                                                                                                                              d



     OGEE
                                                                                B1
                                                                                     B
                                                                                         R
                                               D                           B1
                                               d




     B1                                                                                                                       D1
          B
              R
B1




                                              D1


                                                                                             Tool No.      D      D1       B       B1    R       d
                                                                                              936        3-1/2   2-1/2   1-1/2      1   3/16 1/2 & 3/4
                                                                                              A-32-300   4-1/2   3-1/2   1-1/2      1   3/16 1-1/4


                  Tool No.      D      D1       B     B1    R      d
                   934        3-1/2   2-1/2   1-1/2    1   1/8 1/2 & 3/4
                   A-32-100   4-1/2   3-1/2   1-1/2    1   1/8   1-1/4
                                                                           TRADITIONAL
                                                                                                                              D
                                               D                                                                              d
                                               d



                                                                                B1
     B1
                                                                                     B a°
          B
              R                                                            B1
B1




                                                                                                                              D1
                                              D1




                  Tool No.      D      D1       B     B1    R      d             Tool No.         D       D1       B     B1        R    a°      d
                   935        3-1/2   2-1/2   1-1/2    1   1/4 1/2 & 3/4          937           3-1/2    2-1/2   1-1/2    1        —    30˚ 1/2 & 3/4
                   A-32-200   4-1/2   3-1/2   1-1/2    1   1/4   1-1/4            A-32-400      4-1/2    3-1/2   1-1/2    1        —    30˚   1-1/4


     Products shown in Bold indicate most popular items.                   For rub collars & ‘T’ bushings, please see page 150.
                                                                                                                                                         149
SHAPER CUTTERS & SETS
         SHAPER CUTTERS & ACCESSORIES
                HEAVY-DUTY CARBIDE-TIPPED SHAPER CUTTERS
                                                                           3 Wing • 1-1/4" Bore
          STRAIGHT EDGE                                                                      BEAD (BULLNOSE)
          1-1/4" Bore                                                                        1-1/4" Bore
                                                                                                           d
                      d                                                                                        D1

                                                Tool No.          B        D          d
                                                 A-27-100        1/4       4        1-1/4
                                                 A-27-102        3/8       4        1-1/4    R                              B
                                                 A-27-104        1/2       4        1-1/4
                                      B
                                                 A-27-106        3/4       4        1-1/4
                                                 A-27-108         1        4        1-1/4                  D
                                                 A-27-110       1-1/4      4        1-1/4                             Tool No.        R        B           D    D1         d
                      D                          A-27-112       1-1/2      4        1-1/4                              A-29-100      1/8      1/2          4   3-3/4     1-1/4
                                                 A-27-114       1-3/4      4        1-1/4                              A-29-102     3/16      5/8          4   3-5/8     1-1/4
                                                 A-27-116         2        4        1-1/4                              A-29-104      1/4    13/16          4   3-1/2     1-1/4
                                                                                                                       A-29-106     3/8     1-3/16         4   3-1/4     1-1/4
                                                                                                                       A-29-108      1/2    1-5/16         4     3       1-1/4
          FLUTE (CONVEX)
          1-1/4" Bore                                                                        SHAPER CUTTER ‘T’ BUSHINGS
                                                                                             (With Flange)
                      d
                                                                                                                                                      'C'


                                                                                                                                    'A'                                     'B'
                                             Tool No.      R       B       D      d
                                             A-28-100     1/8     1/4      4    1-1/4
R                                     B      A-28-102    3/16     3/8      4    1-1/4                                                                'd'

                  D                          A-28-104    1/4      1/2      4    1-1/4        Each item number consists of
                                                                                                                                                     'D'
                                             A-28-106     3/8     3/4      4    1-1/4        one of each.
                                             A-28-108     1/2      1       4    1-1/4            Order #         d            D               A           B              C
                                                                                                  BU-550        1/2          3/4            1/4        11/32             1
          CORNER ROUND                                                                            BU-600        3/4         1-1/4            1/4       15/32           1-3/4
          1-1/4" Bore                                                                             BU-700         1          1-1/4           3/16        9/32           1-3/4
                                                                                                  BU-720         1          1-1/4            1/4       11/32           1-3/4
                   d                                                                              BU-750         1          1-1/4          11/32         1/2           1-3/4
                   D1
                                                                                                  BU-800         1          1-1/4          1-5/32      1-9/32          1-3/4
    R
                                                                                             BALL BEARING RUB COLLARS
                                  B Tool No.           R       B     D       D1        d
                                          A-30-100    1/8     3/8    4      3-3/4    1-1/4   FOR 1/2" & 3/4" DIAMETER SPINDLES`
                                          A-30-102   3/16    7/16    4      3-5/8    1-1/4       Designed for template shaping such as arched or
                   D                      A-30-104    1/4     1/2    4      3-1/2    1-1/4   cathedral doors, etc. Features a ball bearing center with a
        Counter-clockwise rotation:       A-30-106   5/16    9/16    4      3-3/8    1-1/4   steel sleeve and is available with either 1/2" or 3/4" inside
        Wood face-down                    A-30-108    3/8     5/8    4      3-1/4    1-1/4   diameter. Please see page 154. for additional rub collars.
                                          A-30-110    1/2     3/4    4        3      1-1/4
                                          A-30-112    5/8     7/8    4      2-3/4    1-1/4
                                                                                                                           Tool No.          d           D                  B
                                          A-30-114    3/4      1     4      2-1/2    1-1/4
                                                                                                                            47800           1/2       1-1/8            .315 (5/16)
                                          A-30-116     1     1-1/4 4-1/2    2-1/2    1-1/4
                                                                                                                            47802           1/2       1-1/4            .315 (5/16)
                                          A-30-118   1-1/4   1-1/2   5      2-1/2    1-1/4
                                                                                                                            47804           1/2       1-3/8            .315 (5/16)
                                          A-30-120   1-1/2   1-3/4 5-1/2    2-1/2    1-1/4
                                                                                                                            47806           1/2       1-1/2            .315 (5/16)
          SHAPER CUTTER CABINET SET                                                                                       * 47808           3/4       1-5/8            .437 (7/16)
                                                                                                                          * 47810           3/4      1-11/16           .437 (7/16)
          SLEEVE BUSHINGS                                                                                                 * 47812           3/4       1-3/4            .437 (7/16)
          (Without Flange)                                                                                                * 47814           3/4       1-7/8            .437 (7/16)
                      'D'                                                                                                 * 47816           3/4          2             .437 (7/16)
                      'd'                                                                                                 * 47818           3/4        2-1/8           .437 (7/16)
                                   Order #     d          D        B                                                      * 47820           3/4       2-3/16           .437 (7/16)
                                    BU-900   1/2         3/4      1/2
                                                                                                                      NEW * 47821           3/4        2-1/2           .437 (7/16)
                                    BU-910   1/2         3/4      3/4                                                     * 47822           3/4        2-5/8           .437 (7/16)
                                    BU-920   1/2         3/4    1-1/16                                                    * 47824           3/4      2-15/16           .437 (7/16)
                  'B'               BU-930   1/2         3/4     1-1/8
                                 For Cabinet Sets #921, 922, 940, 945 &
                                 994 see page 147.
          Products shown in Bold indicate most popular items.                                *Includes 2 steel shims .007" (55358)
150
                                                                SHAPER CUTTERS & SETS
                                                             PROFILE PRO™ SHAPER CUTTERS




                                                                                                                      TM

                                                                            P   R O F I L E            P     R O
         Note: Machine safety guards have been removed for photo clarity.
                                                                            SHAPER CUTTERS
     The Profile Pro™ Universal Shaper Cutter System from Amana Tool®.
Designed for professionals, the Profile Pro™ features over 135 different
interchangeable steel knife patterns, ranging from molding to joinery to door
sets, which can all be used with a single cutterhead. Blank (unground) knives
are also available for custom patterns.

     The Profile Pro™ features a unique system of fixed steel pins (A), screws
(B) and a wedge block (C) that simultaneously indexes and secures the knives
        B           C            (D) to the head (E). This enables fast, accurate
                           D     set-ups and eliminates the tedious task of adjusting
    E
                                 the knives. This type of system also offers greater
                              A safety over other types of cutterheads.                      Above: Aluminum-alloy
                                                                                           Profile Pro™ shaper head
                                        The Profile Pro™ cutterheads are 100mm and
                                   120mm black-oxide finished solid steel or 88mm,
                                   100mm and 120mm blue-anodized lightweight aluminum alloy. The steel cutterheads
                                   are recommended for heavy-duty type shapers with 3 horsepower or more. The
                                   aluminum heads, which are 60% less weight than their steel counterparts, are
                                   recommended for all spindle shapers, especially smaller machines with 2 horsepower
                                   or less.

     When selecting the diameter, choose a cutterhead that will properly fit
within the table insert rings of your shaper. The diameters shown are for
the head only, so you must add from 14mm to 38mm to the diameter to
allow for the knives. (Example: Cutterhead #61100 or SCS-1000 (88mm)
with #64F000 straight knives (add 14mm) = 102mm total outside diameter.)

     Each Profile Pro™ shaper cutter head includes one pair of #64F000
straight knives. See next page for specially priced introductory sets with
seven different knife patterns and custom hardwood storage box.
See pages 159 to 171 for replaceable carbide shaper cutterheads for joinery,                       Above: Solid steel
raised panels, stile and rail, etc.                                                        Profile Pro™ shaper head

                                                                                                                           151
SHAPER CUTTERS & SETS
      PROFILE PRO™ SHAPER CUTTERS
                                                                All sets include the basic 88mm diameter aluminum
           Profile ProTM                                   alloy cutterhead and seven pairs of interchangeable profile
           Multi-Shaper                                    knives. Also included is a custom hardwood storage box,
                                                           hex key and color poster showing many of the different
           Starter Sets                                    available knife profiles. Look over the following pages for a
                                                           full line of aluminum and steel cutterheads in 3/4", 1", 1-1/4"
                                                           and 30mm bores, a wide array of additional knives,
                                                           T-bushings for 1/2" and 3/4" diameter arbors, and empty
                                                           hardwood storage boxes.


                                                                                                                                         RPM
                                                               Set No.              D                   B                   d         Ideal/max.

                                                          NEW * SCS-1106          68mm              40mm (1-1/2")       3/4"-1/2"     7000/9000
                                                                SCS-1000       88mm (3-1/2")        40mm (1-1/2")          1"         7000/9000
                                                                SCS-1002       88mm (3-1/2")        40mm (1-1/2")        30mm         7000/9000
                                                                SCS-1004       88mm (3-1/2")        40mm (1-1/2")        1-1/4"       7000/9000

                                                                                                                                         RPM
                                                          Set No.                   D                  B                    d         Ideal/max.
                                                         * SCS-1108               68mm             40mm (1-1/2")        3/4"-1/2"     7000/9000
                                                      NEW SCS-1100             88mm (3-1/2")       40mm (1-1/2")         30mm         7000/9000
                                                           SCS-1102            88mm (3-1/2")       40mm (1-1/2")           1"         7000/9000
                                                           SCS-1104            88mm (3-1/2")       40mm (1-1/2")         1-1/4"       7000/9000


                                                                                 Replacement Parts:
                                                            D
                                                                                 Order                                                     Qty.
                                                            d
                                                                                  No.        Description                   Size          Required
                                                                                  WB-40 Wedge blocks                 For 40MM knives        2
                                                                           B      67144 Allen socket screws              8x16MM             4
                                                                                  5010 ‘L’ shaped allen key                4MM              1
                                                                                  62282 Wood storage box            For 6 pair of knives    1
      *Includes 2 Bushings (BU-561) 3/4"-1/2"
      .                                                                           BU-561 Bushing                         3/4"-1/2"          2

      The following 40mm knives are included in each set:

                                                                SCS-1000/1002/1004/1106




                                                                                                                                                B




         #64F000            #64F001              #64F002             #64F003           #64F004            #64F005                   #64F006


                                                                SCS-1100/1102/1104/1108



                                                                                                                                                    B




      #64F000            #64F001                #64F016            #64F017           #64F096              #64F098                    #64F099



                         Knives shown at approx. 50% of actual size. See pages 154-158 for full selection of knives.

      Products shown in Bold indicate most popular items.
152
                                                                   SHAPER CUTTERS & SETS
                                                                PROFILE PRO™ SHAPER CUTTERS
ALUMINUM CUTTERHEADS
                                 Profile Pro™ blue anodized aluminum alloy cutterheads in 68, 88, 100 or 120mm diameters.
                                                                                                                                    RPM
                                                           Tool No.              D                        B               d      Ideal/Max.

                                                      NEW
                                                          * 61068              68mm                   40mm (1-1/2")      3/4"    7000/9000
                                                            61100           88mm (3-1/2")             40mm (1-1/2")     30mm     7000/9000
                                                            61102           88mm (3-1/2")             40mm (1-1/2")       1"     7000/9000
                                                            61104           88mm (3-1/2")             40mm (1-1/2")     1-1/4"   7000/9000
                                            D               61200            100mm (4")               40mm (1-1/2")       1"     5800/9000
                                            d
                                                            61204            100mm (4")               40mm (1-1/2")     30mm     5800/9000
                                                            61208            100mm (4")               40mm (1-1/2")     1-1/4"   5800/9000
                                                       B    61228          120mm (4-3/4")             40mm (1-1/2")       1"     5100/7900
                                                            61232          120mm (4-3/4")             40mm (1-1/2")     30mm     5100/7900
                                                            61236          120mm (4-3/4")             40mm (1-1/2")     1-1/4"   5100/7900
*Includes 2 Bushings (BU-561) 3/4"-1/2".
                                                             See below for reducing ‘T’ bushings.

STEEL CUTTERHEADS
                           Profile Pro™ black oxide solid                                                                           RPM
                           steel cutterheads in 100 or    Tool No.               D                        B               d      Ideal/Max.
                              120mm diameters              61212             100mm (4")               40mm (1-1/2")       1"     5800/9000
                                                               61216         100mm (4")               40mm (1-1/2")     30mm     5800/9000
                                                               61220         100mm (4")               40mm (1-1/2")     1-1/4"   5800/9000
                                                               61240       120mm (4-3/4")             40mm (1-1/2")       1"     5100/7900
                                                               61244       120mm (4-3/4")             40mm (1-1/2")     30mm     5100/7900
                                                               61248       120mm (4-3/4")             40mm (1-1/2")     1-1/4"   5100/7900

                                             D
                                             d
                                                                 Replacement Parts:
                                                                                                                                 Qty.
                                                                       Order No.      Description                    Size      Required
                                                                       67144       Allen socket screws             8x16MM         4
                                                         B
                                                                       WB-40       Wedge blocks                For 40MM knives    2
                                                                       5010        ‘L’ shaped allen key              4MM          1
                                                             See below for reducing ‘T’ bushings.


STEEL ‘T’ BUSHINGS
                                                             Order No.         d               D               A            B          C
BLACK OXIDE FINISH,                                          BU-560            1"            30mm             5mm          9mm       55mm

2 REQUIRED PER CUTTER                                  N  EW BU-561           1/2"            3/4"            5mm          9mm       30mm
                                                             BU-562           3/4"           30mm             5mm          9mm       55mm
                                                             BU-564           3/4"             1"             5mm          9mm       55mm
                                            'C'              BU-565           1/2"             1"             5mm          9mm       55mm
                                                             BU-566          30mm            1-1/4"           5mm          9mm       55mm
                                'A'                   'B'
                                                             BU-568            1"            1-1/4"           5mm          9mm       55mm
                                           'd'
                                                             BU-570           3/4"           1-1/4"           5mm          9mm       55mm
                                           'D'




HARDWOOD STORAGE BOXES
                                                  Beautifully made custom hardwood storage boxes will accommodate either
                                                  6, 12, 24 or 36 pairs of 40mm knives along with one Profile-Pro™ cutterhead.
                                                  Order knives and cutterhead separately. No. 62288 is shown at left.

                                                                                                                                 Max. Head
                                                             Order No.           Description                                       Dia.
                                                             62282          Empty hardwood box for 6 pr. 40mm knives              100mm
                                                             62284          Empty hardwood box for 12 pr. 40mm knives             120mm
                                                             62286          Empty hardwood box for 24 pr. 40mm knives             120mm
                                                             62288          Empty hardwood box for 36 pr. 40mm knives             120mm


Products shown in Bold indicate most popular items.
                                                                                                                                              153
SHAPER CUTTERS & SETS
      PROFILE PRO™ SHAPER CUTTERS
      BALL BEARING RUB COLLARS   40MM STEEL KNIVES                                                                    (CONT’D)
      FOR 3/4", 1", 1-1/4" & 30MM SPINDLE SHAPERS
                                                                                               R10
           Designed for template shaping such as arched
                                                                                                                               R12
      or cathedral doors, etc. Features a steel ball bearing center
                                                                                          R8                                R12
      and interchangeable, lightweight aluminum rub collar
      sleeves. To order, specify rub collar (example: #61600,                       #64F004                            #64F005
      75MM), and then order the correct size bearing to fit your
      spindle. The bearing includes a special steel retaining collar                                                           R3
      that properly secures the assembly to your spindle (3/4", 1",                            R5
                                                                                                                               R4.5
      1-1/4" or 30MM).                                                                       R5                                R4.5
                                                                                               R5
                                                                                                                               R4.5
         Collar
         w/ball                                                                     #64F006                            #64F007
        bearing
         inside


                                                                                                                                  R20
                                                                                             R40
                        d
                                                                                                                             R20
                                              B
                                                        Retainer                    #64F008                            #64F009
                        D

                                                                                                                              R5
         Order No.                             Order No.                                                                     R6
        (Rub collar                           (Ball bearing
           only)          D           B        w/ retainer)    d                                                                R15
          61600         75MM        16MM        61650        1-1/4                             R3
          61602         80MM        16MM        61652          1
          61604         85MM        16MM        61654       30MM
                                                                                    #64F010                            #64F011
          61606         90MM        16MM
                                         N   EW 61656         3/4
          61608         95MM        16MM    Order No.
          61610        100MM        16MM    (retainer only)   d
                                                                                             R12
          61612        105MM        16MM      61670         1-1/4
          61614        110MM        16MM      61672           1                         R5
                                                                                             R6                                R10
          61616        115MM        16MM      61674         30MM
          61618        120MM        16MM      61676          3/4
          61620        125MM        16MM
                                                                                    #64F012                           #64F013
          61622        130MM        16MM
          61624        140MM        16MM
          61626        150MM        16MM   NOTE: Bearing only
          61628        160MM        16MM   (1-1/4 x 2-1/2) order
                                           #61660 (no retainer).                         R10                                   R10
          61630        170MM        16MM



      40MM STEEL KNIVES                                                             #64F014                           #64F015



                                                                                         6mm                                      6mm

                                                        22°

                  #64F000                         #64F001                           #64F016                           #64F017

                      R7                                                                      R3
                                                        R8                                                                     R6
                       5°                                                              R12                                         R3.5

                      R6                                R10                                  R5

                  #64F002                         #64F003                           #64F018                           #64F019
      Note: All knives are 40mm and are shown 50% of actual size. Each part # consists of one pair. See page 158 for blank (unground) knives.
      Products shown in Bold indicate most popular items.                Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
154
                                                                   SHAPER CUTTERS & SETS
                                                                PROFILE PRO™ SHAPER CUTTERS
40MM STEEL KNIVES                           (CONT’D)              40MM STEEL KNIVES (CONT’D)
                                                  R7                               R2.5
              R5                                R5                                 R6                                45°
                                              R3
                   R3.5
                                               R3                                        R5                          R15
                                                 R5
                                                    R7                                 R6.5
         #64F020                           #64F021                           #64F036                            #64F037

                                                   R11                                                                 R3.5
                    R8                                                                  R7.5
               R7                               R4
              R5                                                                                                      R3.5
                                                 R7
                     R10
                                                      R8                               15°                            R6

         #64F022                           #64F023                           #64F038                            #64F039

                                                     R5                                                                    R4
                                                      R5                               R8
                        R4
                                                                                                                       R4
                                                                                       R10
                 R8                                                                                                        R6
                                                      R5
                                                     R5

         #64F024                           #64F025                           #64F040                            #64F041

               R1                                                                    R5                              R4
               R9                                                                   R4                              R4
               R1
                                                  12°
                                                                                                                       R15
               R8                                                                      R4
                                                                                         R5
         #64F026                           #64F027                           #64F042                            #64F043

                                                                                   R6                                      R6
                   R8                             R6
                                                                                  R6                                   R6

                                                                                    R15                                   R10
                R8                                R5

         #64F028                           #64F029                            #64F044                           #64F045

                                                  R5                                   R6                             R4
                R6                                                                                                   R6
                                                   R5                              R6
                R5                                                                     R18                             R15

         #64F030                           #64F031                           #64F046                            #64F047

                                                   R2.5                                  R4
                                                                                                                        R10
                                                                                    R6
                                                   R3                                                                 R10
                                                   R3
                                                       R5                              R12
                    R3                                                                                                 R8

         #64F032                           #64F033                           #64F048                            #64F049


                                                                                    R12                                   R6
                     86°                        86°
                                                                                                                           R8
                                                                                    R9

         #64F034                           #64F035                           #64F050                            #64F051
Note: All knives are 40mm and are shown 50% of actual size. Each part # consists of one pair. See page 158 for blank (unground) knives.
Products shown in Bold indicate most popular items.                Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
                                                                                                                                          155
SHAPER CUTTERS & SETS
      PROFILE PRO™ SHAPER CUTTERS
      40MM STEEL KNIVES (CONT’D) 40MM STEEL KNIVES                                                                    (CONT’D)

                                                     R6                                R8                                    R6
                    R5
                   R10
                                                                                       R9
                         R5
                                                           R8                                 R9                             R6

               #64F052                            #64F053                           #64F068                           #64F069

                                                            R6                                R4
                  R8                                                                                                       45°
                                                                                                                             4mm

                        R6                            R9                                                                   45°
                                                                                              R8

                #64F054                           #64F055                           #64F070                           #64F071

                                                                                                                              R8
                          R6                          R15                               45°
                   R8                                                                         4mm                           R8
                   R8
                         R6                                                             45°                                 45°

                #64F056                           #64F057                           #64F072                           #64F073

                                                      R8
                  R12                                                                                                         4mm
                                                                                            4mm
                                                          R8                                 4mm
                                                                                                                                 4mm
                                                           R10

                #64F058                           #64F059                           #64F074                           #64F075

                   R5                                 R8
                  R5                                                                        4mm

                                                      R12                                                                    5.7mm

                   R15                                                                        4mm
                                                            R12

                #64F060                           #64F061                           #64F076                           #64F077

                   R8                                                                                                       R5
                                                          R6                           R3                                  R5
                                                                                              R3
                   R25                                                                                                     R10
                                                                                         R25                                 R10
                       R10                                 R6                                                                  R3
                #64F062                           #64F063                           #64F078                           #64F079

                     R8
                                                                                            48°                               R3
                    R6                                R15
                                                                                        R4                                        R35

                                                                                            48°                                    R5
                       R10

                #64F064                           #64F065                           #64F080                           #64F081


                                                       R8                                                                   45°
                                                                                       R7
                         R15                                                                                                      5mm
                                                                                               R5


               #64F066                            #64F067                           #64F082                           #64F083
      Note: All knives are 40mm and are shown 50% of actual size. Each part # consists of one pair. See page 158 for blank (unground) knives.
      Products shown in Bold indicate most popular items.                Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
156
                                                                   SHAPER CUTTERS & SETS
                                                                PROFILE PRO™ SHAPER CUTTERS
40MM STEEL KNIVES                          (CONT’D)              40MM STEEL KNIVES (CONT’D)
                                                                                       R15
              45°                             15°                                R20
                                                                                                                        R3
              5mm                                    5mm                                                                R15
                                                                                                                         R4
                                                                                R4     5°                                R6
        #64F084                            #64F085                           #64F100                           #64F101


              15°                                                                     R3                                R3
                                                                                          R4                            R23
               5.2mm                            R40
                                                                                      R10                                 R4
                                                                                     R3                                   R4

        #64F086                            #64F087                           #64F102                           #64F103

              R12                                                                    R3.5
             R4                                     R8                                                                  R3
                                                                                      R15
                  R7                          R8
                                                                                                                         R14
                                               R12                                    R6
               R6                                                                     R3                                 R7
                                                     R4
        #64F088                            #64F089                           #64F104                           #64F105


                    R6                                                                R3
                                                                                                                    R3
                                                10mm                                  R14                            R4
                    R5
                                                                                                                       R4
                  R4                                                                   R6
                                                                                                                       45°

        #64F090                            #64F091                           #64F106                           #64F107

                                                                                      R2.5
                                                                                       R2.5                       45°
                     10mm                                                             R2.5                           R20
                                              R11
                                                                                       R2.5
                                                                                                                         R4
                                                                                      R2.5
        #64F092                            #64F093                           #64F108                           #64F109

                                                                                     R4
                                                                                                                   R11
              8mm                                   8mm
                                                                                      R8                                     R6
                                                                                       R3

        #64F094                            #64F095                           #64F110                           #64F111

                                               R8                                                                 15°
             R6.5                               R8
                                                  4.4mm                          R6
                    R6.5                          4.4mm                                                                 6mm
                                                R8                                        R11
                                                 R8
                                                                                                                  15°
        #64F096                            #64F097                           #64F112                           #64F113

             R7                                      R7                                15°
                    R7                                                                                              R15
                                              R7
                                                     8mm                                  6mm
                    R7                         R7                                                                   R12
             R7                                      R7                                15°
        #64F098                            #64F099                           #64F114                           #64F115
Note: All knives are 40mm and are shown 50% of actual size. Each part # consists of one pair. See page 158 for blank (unground) knives.
Products shown in Bold indicate most popular items.                Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
                                                                                                                                          157
SHAPER CUTTERS & SETS
      PROFILE PRO™ SHAPER CUTTERS
      40MM STEEL KNIVES (CONT’D) 40MM STEEL KNIVES                                                                    (CONT’D)

                       60°                                                                  R5                                  R6

                                                         R4

                                                                                            R5                                 R6
               #64F116                            #64F117                           #64F172                            #64F173

                                                                                             R8
                                                                                                                                R10
                   R13.5                                   R13.5

                                                                                           R8                                 R10

                #64F118                            #64F119                           #64F174                            #64F175

                                                        R2.5
                                                                                            R12
                           R20                                                                                                 R15
                                                           R15
                                                           R3
                       R20                                 R3
                                                                                          R12                                R15

                #64F120                            #64F121                           #64F176                            #64F177

                      R2.5                                     R2.5
                       R3                                     R20
                                                           R40
                                                                           BLANK (UNGROUND) KNIVES
                           R3
                                                          R18
                                                                           FOR CUSTOM GRINDING
                           R3
                #64F122                           #64F123                                         #64RM193
                                                                                            4mm
                           R12                                  R4
                                                               R6
                                                                                                                   6mm
                       R10                               45°
                                                          R8                           40mm                         11mm
                                                             R10
                       R10                                                                                         6mm
                #64F124                            #64F125
                                                                                                    44.75mm

                           R10
                     R8                                   45°
                    45°
                        R6                                 45°                                    #64RM599
                         R4
                                                                                           4mm
                #64F126                           #64F127
                                                                                                                    6mm
                                                              R15                      50mm                          11mm
                      R6.5
                                                         R5                                                         6mm
                      R22
                                                               R4
                                                                                                      46mm
                #64F128                           #64F129

                       R3                                  R4




                       R3                                 R4
                #64F170                            #64F171
      Note: All knives (except #64RM599) are 40mm and are shown 50% of actual size. Each part # consists of one pair.
      Products shown in Bold indicate most popular items.              Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
158
                                                                      SHAPER CUTTERS & SETS
                                                                                    INSERT SHAPER CUTTERS


I   n addition to the Profile-Pro™ cutterheads, there are replaceable carbide knife cutter-
    heads for stile and rail, raised panel, glue joint, lock miter, finger-jointing, chamfering,
rabbeting, dadoing,.....and edge jointing. Each cutterhead features lightweight aluminum
alloy or solid steel construction with precision ground, micrograin carbide knives. Also, there
are several new CNC router bits for various applications, including mill-to-pattern carbide.
(See page 86.)

   Most of these cutterheads comply with the strict regulations of the German “BG Test”,
making them among the safest and best cutters that money can buy. Each cutter has a
unique and positive locking system to hold the knives, which ensures exact indexing, less
down-time and more production. If you should require further information, please call our
Technical Hot-Line @1-800-445-0077.

STILE AND RAIL CUTTERHEAD

                                                                         Aluminum alloy head with one-sided reversible carbide
                                                                    knives, utilizing the same knives for both stile and rail cuts by
                                                                    simply adjusting the spindle height of your shaper. The basic No.
                                                                    61272 cutterhead includes the ogee fillet knives (No. RCK-60)
                                                BG-TEST
                                                                    and 3mm T-handle hex key. To achieve the classical, ogee or
                                                167-028             traditional profiles, order No. 61272 and the desired knives
                                                                    separately. All patterns are designed for 7/8" through 1" thick
                                                                    doors.


                                                                                                                                       RPM
                                                                      Tool No.        D                 B               d           Ideal/max.
                            D                                          61272     120mm (4-3/4")     40mm (1-1/2")     1-1/4"        6400/8400
                            d

                                                                             Replacement Parts:
                                                                             Order                                                   Qty.
                                                                              No.         Description                 Size         Required
                                                  B                          67144 Allen screws                     8x1.0MM           4
                                                                             67148 Slotted stop screws               4x.7MM           2
                                                                             WB-22 Wedge blocks                         —             2
                                                                             5012    ‘T’ handle hex key               3MM             1

                                                               Replacement Knives:
                     12mm
                                                                (Each part number
                                                               consists of one pair)
                                R 4mm                                                                                          R 5mm
                                              Ogee Fillet
   min                       5      8mm       No. RCK-60                               Classical
   7/8                      mm                                                       No. RCK-64




       Wood Illustrations                                                                                                      Traditional
          shown at                                                                                                             No. RCK-66
         approx. 50%
                                              Ogee                       R 6mm
                                        No. RCK-62                                                                    26.5˚




See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
Products shown in Bold indicate most popular items.                   Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
                                                                                                                                                 159
SHAPER CUTTERS & SETS
      INSERT SHAPER CUTTERS
      RAISED PANEL CUTTERHEAD
                                                                              Aluminum alloy head with three different carbide knife
                                                                        profiles available. The standard cutterhead is furnished with the
                                                                        No. RCK-42 “Traditional” knives. A regular slotted screwdriver
                                                                        is all that is required to change the knives. To achieve the
                                                                        Ogee or Cove profiles, order No. 61260 and the desired knives
                                                                        separately. Knives have two cutting edges each.
                                                                                                                                   RPM
                                                                    Tool No.     D             B             L          d       Ideal/max.
                                                                     61260 160mm (6-1/4")  20mm (7/8")   50mm (2")    1-1/4"    4800/8000
                         D                                         Replacement 3 x .5mm Pan Head screws, No. 67152 (4 required)

                         d
                                                                                          Replacement Knives:
                                                                                 (Each part number consists of one pair)

                                                 B
                                      L
                                                                                Wood Illustration shown at approx. 50%
                                                                           R5mm
                                  R5mm                                                                                         R20mm
                                                                                  R40mm
                                                                                     R40mm

      B                                              B                                             B
                                                3˚                                           3˚                                                3˚




                        50mm                                          50mm                                             50mm

                 Traditional No. RCK-42                         Ogee No. RCK-44                                 Cove No. RCK-46



      “BG” RAISED PANEL CUTTERHEAD
                                                                             Aluminum alloy head with 2-sided replaceable carbide
                                                                        knives. Manufactured to strict “BG” specifications, which limits
                                                                        the chip thickness for a safer, more controlled cut. For use with
                                                     BG-TEST            1-1/4", 1" or 30mm spindles only. Standard bore is 1-1/4".
                                                     167-014            Includes 3mm T-Handle hex key.
                                                                                                                                          RPM
                                                                    Tool No.       D                 B            L             d      Ideal/max.
                                                                     61262     180mm (7")         25mm (1")   60mm (2-3/8")   1-1/4"   4200/7000

                                                                                 Replacement Parts:
                                                                                 Order                                                   Qty.
                                                                                  No.         Description                 Size         Required
                                                                                 RCK-78 Pair carbide knives              60MM             1
                                                                                 67144 Allen screws                     8x1.0MM           4
                                                                                 WB-10 Wedge blocks                        —              2
                                                                                 5012    ‘T’ handle hex key               3MM             1

                                                           Wood Illustration
                                                         shown at approx. 50%

                                                                    R5mm                                           D
                                                                           R50mm
                                                                               R50mm                               d

                                          B                                                                                        L

                                                                                                                                              B


                                                               60mm
                                                                                                         Replacement Knives:
                                                                                                         No. RCK-78 (one pair)

      See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
      Products shown in Bold indicate most popular items.
160
                                                                        SHAPER CUTTERS & SETS
                                                                                             INSERT SHAPER CUTTERS
CONCAVE AND CONVEX CUTTERHEAD
                                                                           Aluminum alloy heads with replaceable carbide knives that
                                                                      are ground with both concave and convex radii. Standard bore
                                                                      is 1-1/4". Includes 3mm T-Handle hex key and special 1mm
                                                BG-TEST               knife setting gauge.
                                                167-026
                                                                                                                                           RPM
                                                                  Tool No.    D                    R             B          d           Ideal/max.
                                                                   61320 120mm (4-3/4")        10mm (3/8")    25mm (1")   1-1/4"        6400/10000
                                                                   61324 124mm (4-7/8")        12mm (.472") 30mm(1-3/16") 1-1/4"        6200/9800

                                                                                  Replacement Parts:
                     100mm                                                        Order                                                    Qty.
                                                                                   No.        Description                   Size        Required
                       d                                                          RCK-74 Pair carbide knives               10MM         1(61320)
      R




                                                                                  RCK-76 Pair carbide knives               12MM         1(61324)
                                                                                  67142 Allen screws                       6x1MM            4
                                                B                                 WB-14 Wedge blocks                  For 10MM radius   2(61320)
                                                                                  WB-18 Wedge blocks                  For 12MM radius   2(61324)
                                                                                  5012    ‘T’ handle hex key                3MM             1
  R




                       D                                                          67156 Knife setting gauge                 1MM             1




            Actual              Actual
             Size                Size
            61320               61324




MULTI PROFILE CUTTERHEAD                                                  Aluminum alloy heads with special multi-radii replaceable
                                                                      carbide knives. A very versatile cutter for moldings such as
                                                                      beads, corner rounds, classical or a combination of each. Multiple
                                                                      passes and depth settings will give even further combinations.
                                                                      Two different sizes available. Standard bore is 1-1/4". Includes
                                                                      3mm T-Handle hex key.
                                                      BG-TEST
                                                                                                                                       RPM
                                                      167-018          Tool No.          D                 B                 d      Ideal/max.
                                                                        61276       120mm (4-3/4")    40mm (1-1/2")        1-1/4"   6400/10000
                                                                        61280       160mm (6-1/4")      50mm (2")          1-1/4"   4800/8000
                                                                              Replacement Parts:
                                                                              Order                                                        Qty.
                                                                               No.         Description                     Size         Required
                       D
                                                                              RCK-84 Pair carbide knives                     —          1(61276)
                       d
                                                                              RCK-86 Pair carbide knives                     —          1(61280)
                                                                              67142 Allen screws                          6x1MM             4
                                                                              67150 Flat head screws                      4x.7MM            2
                                                                              WB-22 Wedge blocks                             —          2(61276)
                                            B
                                                                              WB-36 Wedge blocks                             —          2(61280)
                                                                              5012    ‘T’ handle hex key                   3MM              1


                                                                   Wood Illustration
     Tool No. 61280                                              shown at approx. 50%
                                                    R 6mm
Replacement Knives
        No. RCK-86
          (one pair)                                                                                 R 4.8mm
                                                    R 8mm
                           50                                                        R               R 4.5mm
                           mm                        R 10mm                              7
                                                                           40                        R 7mm                     Tool No. 61276
                                                                           mm
                                                                                                                          Replacement Knives
                                                            7˚                                                                    No. RCK-84
                                                                                                                                    (one pair)

                                         25mm                                                16mm

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
Products shown in Bold indicate most popular items.
                                                                                                                                                     161
SHAPER CUTTERS & SETS
      INSERT SHAPER CUTTERS
      GLUE JOINT CUTTERHEAD
                                                                             Aluminum alloy head with two-sided replaceable carbide
                                                                        knives. Manufactured to strict “BG” specifications, which limits
                                                                        the chip thickness for a safer, more controlled cut. Standard
                                                                        bore is 1-1/4". Includes 3mm T-handle hex key.
                                                                                                                                       RPM
                                                                          Tool No.        D                  B               d      Ideal/max.
                                                      BG-TEST              61264     130mm (5-1/8")       50mm (2")        1-1/4"   6000/10000
                                                      167-015              61268     130mm (5-1/8")     60mm (2-3/8")      1-1/4"   6000/10000

                                                                                 Replacement Parts:
                                                                                 Order                                                      Qty.
                                                                                  No.          Description                 Size          Required
                                                                                 RCK-80 Pair carbide knives               50MM           1(61264)
                                                                                 RCK-82 Pair carbide knives               60MM           1(61268)
                                                                                 67142 Allen screws                       6x1MM              4
                                                                                 67182 Slotted stop screws                6x1MM              2
                                                                                 WB-30 Wedge blocks                         —            2(61264)
                                                                                 WB-34 Wedge blocks                         —            2(61268)
                         D                                                       5005    ‘L’ shaped hex key                3MM               1
                         d




                                           B

                                                                                                 Wood Illustration
                                                                                                    shown at
                                                                                                  approx. 50%
                                                                 B



                                                                                         Tool No. 61264



      ‘V’ TYPE GLUE JOINT CUTTERHEAD
                                                                              Aluminum alloy head with two-sided replaceable carbide
                                                                         knives. Manufactured to strict “BG” specifications, which limits
                                                                         the chip thickness for a safer, more controlled cut. Standard
                                                      BG-TEST            bore is 1-1/4". Includes 3mm T-handle hex key.
                                                      167-013
                                                                                                                                        RPM
                                                                          Tool No.       D                  B               d        Ideal/max.
                                                                           61296     90mm (3-1/2")       50mm (2")        1-1/4"     8500/10600

                                                                                 Replacement Parts:
                                                                                 Order                                                     Qty.
                                                                                  No.         Description                  Size          Required
                                                                                 RCK-72 Pair carbide knives               50MM              1
                                                                                 67142 Allen screws                       6x1MM             4
                                                                                 WB-10 Wedge blocks                         —               2
                               D                                                 5012    ‘T’ handle hex key                3MM              1
                               d
                                                                             max 50mm

                                                                                                      83.5˚
                                                B
                                                                                                                     Wood Illustration
                                                                                                                        shown at
                                                                                                                      approx. 50%




                                                                       5mm

      See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
      Products shown in Bold indicate most popular items.
162
                                                                    SHAPER CUTTERS & SETS
                                                                                   INSERT SHAPER CUTTERS
JOINTING CUTTERHEAD
                                                                      Aluminum alloy head with 12 staggered carbide knives.
                                                                  Each knife has four cutting edges each for extra production
                                                                                                                      ®
                                                                  and economy. Standard bore is 1-1/4". Includes Torx key.

                                                                                                                               RPM
                                             BG-TEST               Tool No.   D                    B                d       Ideal/max.
                                                                    61288 62mm (2-1/2")        80mm (3-1/8")      1-1/4"    8000/12000

                                                                          Replacement Parts:
                                                                          Order                                                Qty.
                                                                           No.         Description                 Size      Required
                                                                         *RCK-70 Carbide knives, each           14x14x2MM      12
                                                                          67154 Torx® screws                      5x.8MM       12
                                                                          5025   ‘L’ shaped Torx® key               T-25        1

                                                                          *NOTE: Minimum order 10 each for RCK-70.
                                                      D




                                       B




                                                      d




SPIRAL JOINTING CUTTERHEAD
                                                                       Aluminum alloy head with unique spiral/staggered design
                                                                  where faster feed rates are more important than the finish.
                                                                  Manufactured to strict “BG” specifications, which limits the chip
                                                                  thickness for a safer, more controlled cut. Each knife has 4
                                                                  cutting edges. Standard bore is 1-1/4". Includes Torx® key.
                                             BG-TEST

                                                                                                                               RPM
                                                                    Tool No.       D                B                d      Ideal/max.
                                                                     61292     62mm (2-1/2")    80mm (3-1/8")      1-1/4"   8000/12000

                                                                          Replacement Parts:
                                                                          Order                                                Qty.
                                                                           No.          Description                Size       Needed
                                                                         *RCK-70 Carbide knives, each           14x14x2MM       12
                                                                          67154 Torx® screws                      5x.8MM        12
                                                                          5025    ‘L’ shaped Torx® key              T-25        1

                                                      D                  *NOTE: Minimum order 10 each for RCK-70.




                                        B




                                                      d




See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
Products shown in Bold indicate most popular items.
                                                                                                                                         163
SHAPER CUTTERS & SETS
      INSERT SHAPER CUTTERS
      DIAL TYPE INDEXABLE GROOVING HEAD
      4.0 TO 7.5MM KERF
                                                                                Fully adjustable in 1/10mm (.004") increments from 4.0 to
      STEEL BODY                                                            7.5mm. Sizes are changed by simply unlocking and turning the
      WITH 8 CARBIDE INSERT KNIVES                                          adjusting collar, and then ‘dialing-in’ the desired width on the
                                                                            easy-to-read scale. All eight knives have four cutting edges
                                                                            each for long tool-life and economy.


                                                                                                                                              MAX
                                                            Tool No.    D                     B                    t              d           RPM
                                                             61330 130MM(5-1/8") 4.0 to 7.5MM(5/32 to 19/64") 20MM(25/32")      1-1/4"       10,200


                                                                                           Replacement Parts:
                                                                                           Order                                               Qty.
                                                                                           No.     Description              Size             Required
                                                                                          *RCK-71 4-sided knife #1     14x14x1.2MM              4
                                                                                          *RCK-18 4-sided knife #2     18x18x2.0MM              4
                  BG-TEST                                                                  67170 Screw retainer #1     4.0x.5x10MM              4
                  167-007                                                                  67172 Screw retainer #2     4.0x.5x12MM              4
                                                                                           67160 Flat head knife        4x.5x3.0MM              8
                                   D                                                               retaining screws
                                                                                           67164 Slotted collar         5x.8x7.0MM               1
                                   d                                                               locking screw
                                                                                           5090    Torx key
                                                                                                        ®
                                                                                                                               #T-9              1

                                                                   B         *Note: Minimum order 10 each for RCK-71 and RCK-18.


                                                    t




      DIAL TYPE INDEXABLE GROOVING HEAD
      8.0 TO 15MM AND 12.5 TO 24MM KERF
                                                                               Same as above #61330, but kerf range is 8.0 to 15mm, or
      STEEL BODY                                                           12.5 to 24mm.
      WITH 8 CARBIDE INSERT KNIVES

                                                                                                                                              MAX
                                                            Tool No.    D                     B                     t              d          RPM
                                                             61340 160MM(6-5/16") 8.0 to 15MM(5/16" to 19/32") 30MM(1-3/16")     1-1/4"       8,200
                                                             61342 160MM(6-5/16") 12.5 to 24MM(1/2" to 15/16") 30MM(1-3/16")     1-1/4"       8,200

                                                                                Replacement Parts:
                                                                                Order                                                        Qty.
                                                                                No.      Description                     Size              Required
                                                                               *RCK-70   4-sided knife #1          14x14x2.0MM                4
                                                                               *AMA-17 2-sided knife #2            7.5x12x1.5MM          4(61340 only)
                                                                                AMA-12 4-sided knife #3            12x12x1.5MM           4(61342 only)
                                                                                67162    Slotted head knife screws    5x.8x5MM                4
                                                                                67166    Allen head set screws       5x.8x16MM                4
                  BG-TEST                                                       WB-42    Wedge blocks for 7.5MM knives —                      4
                  167-005                                                       WB-44    Wedge blocks for 15MM knives —                       4
                                    D
                                                                                5007     ‘L’ shaped hex key            2.5MM                  1
                                                        t
                                    d                                       *Note: Minimum order 10 each for RCK-70, AMA-17 and AMA-12.

                                                                   B




      See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
      Products shown in Bold indicate most popular items.
164
                                                                    SHAPER CUTTERS & SETS
                                 INSERT SHAPER CUTTERS
SHIM TYPE ADJUSTABLE GROOVING HEAD
4.0 TO 7.5MM KERF                                                      This type of head will perform the same function as the
STEEL BODY                                                        dial type shown on previous page, but is more economical
                                                                  because it uses a set of steel shims to adjust the head.
WITH 8 CARBIDE INSERT KNIVES

                                                                                                                                  MAX
                                                    Tool No.    D                        B                     t          d       RPM
                                                     61350 160MM(6-5/16")   4.0 to 7.5MM(5/32" to 19/64") 30MM(1-3/16") 1-1/4"    8,300

                                                                               Replacement Parts:
                                                                               Order                                                Qty.
                                                                               No.     Description                    Size        Required
                                                                              *RCK-71 4-sided knife #1           14x14x1.2MM         4
                                                                              *RCK-18 4-sided knife #2           18x18x2.0MM         4
                                                                               67170 Screw retainer #1           4.0x.5x10MM         4
             BG-TEST                                                           67172 Screw retainer #2           4.0x.5x12MM         4
             167-008                                                           67160 Flat head knife              4x.5x3.0MM         8
                                                                                       retaining screws
                                D                                              67164 Slotted collar              5x.8x7.0MM          1
                                                                                       locking screw
                                d                                              5090    Torx® Key                      #T-9           1
                                                                               67186 6-piece shim set        .1,.4,.5MM & 3x1MM

                                                                              *Note: Minimum order 10 each for RCK-71 and RCK-18.
                                                           B


                                                t




SHIM TYPE ADJUSTABLE GROOVING HEAD
8.0 TO 15MM AND 12.5 TO 24MM KERF                                     This type of head will perform the same function as the dial
STEEL BODY                                                        type shown previous page, but is more economical because it
WITH 8 CARBIDE INSERT KNIVES                                      uses a set of steel shims to adjust the head.


                                                                                                                                  MAX
                                                    Tool No.    D                       B                     t          d        RPM
                                                     61360 160MM(6-5/16")   8.0 to 15MM(5/16" to 19/32") 30MM(1-3/16") 1-1/4"     8,200
                                                     61362 160MM(6-5/16")   12.5 to 24MM(1/2" to 15/16") 30MM(1-3/16") 1-1/4"     8,200


                                                                       Replacement Parts:
                                                                       Order                                                   Qty.
                                                                       No.     Description                       Size        Required
                                                                      *RCK-70 4-sided knife #1             14x14x2.0MM          4
                                                                      *AMA-17 2-sided knife #2             7.5x12x1.5MM 4(61360 only)
                                                                      *AMA-12 4-sided knife #3             12x12x1.5MM 4(61362 only)
             BG-TEST
                                                                       67162 Slotted head knife screws        5x.8x5MM          4
             167-004
                                                                       67166 Allen head set screws           5x.8x16MM          4
                                D
                                                                       WB-42 Wedge blocks for 7.5MM knives        —        4(61360 only)
                                                                       WB-44 Wedge blocks for 15MM knives         —        4(61362 only)
                                d
                                                                       5007    ‘L’ shaped hex key              2.5MM            1
                                                                       67186 6-piece shim set          (1 each @.1,.4,.5MM &    1
                                                                                                          3 each @1.0MM)
                                                            B

                                                                      *Note: Minimum order 10 each for RCK-70, AMA-17 and AMA-12.

                                                t


See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
                                                                                                                                             165
SHAPER CUTTERS & SETS
      INSERT SHAPER CUTTERS
      INTERMEDIATE STACKABLE CUTTERS
      FOR SHIM TYPE GROOVING HEADS                                           Use with shim type adjustable grooving head models
      7, 15 AND 20MM KERFS                                               #61350, 61360 and 61362 on previous page. Enables
                                                                         expansion of standard sets in the same way that a stackable
                                                                         dado set works. The intermediate cutter(s) fit between the two
                                                                         outside cutters. Order extra shim sets (above) as required.

                                                                                                                        Use with      MAX
                                                     Tool No.    D                   B              t          d      Cutterhead #    RPM
                                                      61384 160MM(6-5/16")      7.0MM(9/32")   30MM(1-3/16") 1-1/4"   61350, 61360    8,200
                                                                                                                       and 61362
                                                      61386 160MM(6-5/16") 15.0MM(19/32") 30MM(1-3/16") 1-1/4"          as above      8,200
                                                      61388 160MM(6-5/16") 20.0MM(25/32") 30MM(1-3/16") 1-1/4"          as above      8,200

                                                                             Replacement Parts:
                                                                              Order                                              Qty.
                  BG-TEST                                                     No.    Description                     Size      Required
                  167-004                                                    *AMA-17 2-sided knife #1          7.5x12x1.2MM 2(61384 only)
                                                                             *ICK-15 2-sided knife #2         15.0x12x1.5MM 2(61386 only)
                                                                             *ICK-20 2-sided knife #3          20.0x12x1.5MM 2(61388 only)
                                    D                                         67166 Allen head set screws        5x.8x16MM        2
                                                                              WB-42 Wedge blocks for 7.5MM knives     —           2
                                    d                                         WB-44 Wedge blocks for 15.0MM knives —              2
                                                                              WB-46 Wedge blocks for 20.0MM knives —              2
                                                                              5007   ‘L’ shaped hex key            2.5MM          1
                                                                 B
                                                                         *Note: Minimum order 10 each for AMA-17, ICK-15 and ICK-20.

                                                      t




      INDEXABLE CHAMFER CUTTERHEADS
      2-WING                                                                  This series of cutterheads utilizes either lightweight
      WITH CARBIDE INSERT KNIVES                                         aluminum or solid steel bodies with 2-sided replaceable
                                                                         carbide knives. An exclusive adjustment system is used that
                                                                         features positive stops at 7.5° increments for precise indexing.
                                                                         Two different types are available- #61304 is aluminum with
                                                                         +/- 45° range and #61306 is solid steel with +/- 60° range.
                                                                         Also available in a CNC router bit - see page 85.
                                                                                                            Adjustment                   MAX
                                                            Tool No.       D             B                     Range                d    RPM
                                                             61304     120MM(4-3/4") 40MM(1-37/64) 0°, 7.5°, 15°, 22.5°, 30°,     1-1/4" 8,500
                                                             (Aluminum)                                 37.5° and 45°, R&L.
                                                             61306     130MM(5-1/8") 50MM(1-31/32)   0°, 7.5°, 15°, 22.5°, 30°    1-1/4" 8,100
      Cutter #61306                                          (Steel)                             37.5°, 45°, 52-1/2° and 60° R&L.
      shown (Steel).
                                                                              Replacement Parts:
                                                                              Order                                             Qty.
                  BG-TEST                                                     No.     Description                    Size     Required
                  167-017                                                    *RCK-40 2-sided Knife #1          40x12x1.5MM 2(61304 only)
                                                                             *RCK-50 2-sided Knife #2          50x12x1.5MM 2(61306 only)
                                    D
                                                                              67166 Socket head screws           5x.8x15MM       4
                                    d                                         67171 Screw head retainers              —          4
                                                                              67174 Allen head screws             6x1x8MM        4
                                                                              67173 Screw tail retainer       5x.8mm threaded    4
                                                                              WB-50 Wedge blocks for 40MM knives      —          2
                                                                              WB-52 Wedge blocks for 50MM knives      —          2
                                                                B             5004    ‘L’ shaped hex key           3.0MM
                                                                              5014    ‘T’ handle hex key           4.0MM

                                                                         *Note: Minimum order 10 each for RCK-40, and RCK-50.

      See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
      Products shown in Bold indicate most popular items.
166
                                                                    SHAPER CUTTERS & SETS
                                                                                    INSERT SHAPER CUTTERS
INDEXABLE CHAMFER CUTTERHEAD
2-WING                                                              This aluminum head is similar to tool no. 61304 on previous
WITH CARBIDE INSERT KNIVES                                    page, except that it is infinitely adjustable from 90° both right and
                                                              left (does not have positive stops). Using the graduated scale, the
                                                              cutter can be set-up for any angle.


                                                                                                         Adjustment             MAX
                                                              Tool No.        D               B            Range        d       RPM
                                                               61310        160MM           50MM           +/- 90°    1-1/4"    8,000


                                                                          Replacement Parts:
                                                                          Order                                                   Qty.
                                                                          No.     Description                          Size     Required
                                                                         *RCK-50 2-sided knife #1                 50x12x1.5MM      2
                                                                          67174 Socket head screws                  6x1x8MM        4
             BG-TEST                                                      67179 Socket head retaining screws       4x.7x25MM       2
             167-012                                                      67175 Screw head retainer                  4x.7MM        2
                                                                          67177 Screw tail retainer                  4x.7MM        2
                                                                          WB-68 Wedge blocks for 50mm knives            —          2
                             D
                                                                          5012    ‘T’ handle hex key                 3.0MM         1
                             d
                                                                  *Note: Minimum order 10 each for #RCK-50.




                                                         B




INDEXABLE LOCK MITER CUTTERHEAD
2-WING
                                                                       This cutterhead utilizes a solid steel body with replaceable
WITH CARBIDE INSERT KNIVES                                        carbide knives. An exclusive adjustment system is used that
                                                                  features positive stops at 7.5° increments for precise indexing.
                                                                  The ideal cutter for joining various polygon shapes such as
                                                                  hexagons (6-sided), octagons (8-sided), etc.

                                                                                                        Adjustment               MAX
                                                              Tool No.     D              B                Range            d    RPM
                                                               61298 170mm(6-11/16") 40MM(1-37/64") 0°, 7.5°, 15°, 22.5°, 1-1/4" 6,000
                                                                                                    30°, 37.5° and 45°.

                                                                         Replacement Parts:
                                                                         Order                                                    Qty.
                                                                         No.     Description                          Size      Required
                                                                         RCK-90 1-sided knives (pair)              40x1.5MM       1pr.
                                                                         67142 Socket head screws                  6x1x16MM        4
                                                                         67166 Socket head retaining screws        5x.8x16MM       4
                             D                                           67171 Screw head retainer                     —           4
                                                                         67173 Screw tail retainer              5x.8MM threaded    4
                             d                                           WB-58 Wedge blocks                            —           2
                                                                         5004    ‘L’ shaped hex key                  3.0MM         1
                                                                         5014    ‘T’ handle hex key                  4.0MM         1
                                                         B




See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
                                                                                                                                           167
SHAPER CUTTERS & SETS
      INSERT SHAPER CUTTERS
      45° LOCK MITER CUTTERHEAD
      2-WING                                                                 This is a fixed cutterhead at the traditional 45° setting for
      WITH CARBIDE INSERT KNIVES                                        joining squares or rectangles. Heavy duty production cutter
                                                                        featuring solid steel body and shear angle for fast, smooth
                                                                        cutting. For material sizes 9/16" through 1-1/16" thickness.



                                                                                                                                       MAX
                                                                         Tool No.             D                B              d        RPM
                                                                          61290         170MM(6-11/16")   40MM(1-37/64")    1-1/4"     6,000


                                                                             Replacement Parts:
                                                                             Order                                                        Qty.
                  BG-TEST                                                    No.     Description                              Size      Required
                  167-023                                                    RCK-90 1-sided knives (pair)                  40x1.5MM        1
                                                                             67142 Socket head screws                      6x1x16MM        4
                                                                             WB-54 Wedge blocks                                —           2
                                                                             5005    ‘L’ shaped hex key                      3.0MM         1
                                                                   B         5014    ‘T’ handle hex key                      4.0MM         1


                                        d
                                        D
                    90°
                              15-28MM




      HIGH-PRODUCTION FINGER JOINTING SYSTEM
      3-WING                                                                 A high-production, high-performance finger jointing system
      WITH CARBIDE INSERT KNIVES                                        for automatic or power feed only. This design features 3-wing
                                                                        stackable cutterheads with solid steel bodies and carbide
                                                                        insert knives. Each cutter will cut up to 40MM high and
                                                                        10MM deep.

                                                                                                                                        MAX
                                                                    Tool No.     D              B             t                d        RPM
                                                                     61270 170MM(6-11/16") 40MM(1-37/64") 10MM(3/8")         1-1/4"     7,000

                                                                             Replacement Parts:
                                                                             Order                                                        Qty.
                                                                             No.     Description                               Size     Required
                                                                             RCK-92 1-sided knives (each)                   40x1.5MM       3
                                                                             67142 Socket head screws                      6x1x16MM        6
                                                                             67184 Socket head screws                      4x.7x16MM       6
                                                                             WB-56 Wedge blocks                                 —          3
                                                                             BP-10 Steel backing plates                         —          3
                                                                             5004    ‘L’ handle hex key                      3.0MM         1




                                        d                                                   B
                                        D
                                                                                    t

      See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
      Products shown in Bold indicate most popular items.
168
                                                                        SHAPER CUTTERS & SETS
                               INSERT SHAPER CUTTERS
ALUMINUM CONCAVE & CONVEX CUTTERHEADS
2-WING                                                                    Specialty decorative cutters for single or multiple radii.
WITH CARBIDE INSERT KNIVES                                            Available in matching concave and convex profiles.

                                                                                                                                            MAX
                                 Tool No. Type      D           D1           B                            R                         d       RPM
                                 61420 Concave 180MM(7-3/32") 107MM      35MM(1-3/8")   4,6,8,10MM(5/32",15/64",5/16" & 25/64")   1-1/4"    7,500
                                 61430 Convex 180MM(7-3/32") 91MM        35MM(1-3/8")   4,6,8,10MM(5/32",15/64",5/16" & 25/64")   1-1/4"    7,500
                                                                           Replacement Parts:
                                                                           Order                                                      Qty.
                                                                           No.     Description                          Size        Required
                                                                           RCK-94 2-sided knves (pair) for 61420    50x16x2MM          1
                                                                           RCK-96 2-sided knves (pair) for 61430    50x16x2MM          1
                                                                           67142   Socket head screws               6x1x16MM           4
                                                                           67148   Flat head stop screws             4x.7x8MM          2
                                                                           WB-60 Wedge blocks for 61420                  —             2
                    61430                                                  WB-62 Wedge blocks for 61430                  —             2
                                                                           5005    ‘L’ shaped hex key                 3.0MM            1


                            D

                            d                                                                                         D
                                                                                                                      d



                                                                                                                                            B
                                                B



                                                                                                                      D1
                            D1
                                                                        61420


ALUMINUM MOULDING CUTTERHEAD
2-WING
                                                                          Specialty decorative cutter for architectural moldings such
WITH CARBIDE INSERT KNIVES                                            as chair rail, base, crown, etc.




                                                        Tool No.      D              D1           B                     R                    d
                                                        61440    180MM(7-3/32")     93MM     40MM(1-37/64")     8, 11MM(5/16, 7/16")       1-1/4"


                                                                          Replacement Parts:
                                                                           Order                                                      Qty.
                                                                           No.    Description                         Size          Required
                                                                           RCK-98 2-sided knives (pair)            60x1.5MM            1
                                            D
                                                                           67142 Socket head screws                6x1x16MM            4
                                            d                              67148 Flat head stop screws             4x.7x8MM            2
                                                                           WB-64 Wedge blocks                          —               2
                                                                           5005   ‘L’ shaped hex key                 3.0MM             1


                                                                    B
   60




                     R
                      8
                R
                11




                                           D1
            R
            11
     R
        8




See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
                                                                                                                                                    169
SHAPER CUTTERS & SETS
      INSERT SHAPER CUTTERS
      PLATE JOINTER REPLACEMENT CUTTER
      WITH CARBIDE INSERT KNIVES

                                                                             Used as a replacement for Lamello, Freud, Kaiser, and
                                                                        other brands of ‘biscuit’ cutters. Ideal for any shop and never
                                                                        needs sharpening. Features include solid tool-steel body, spur
                                                                        cutters and four-sided carbide knives. Choose the 4-knife
                                                                        version for faster cutting or the 8-knife for smoother cuts.


                                                                       Tool No. Description                  D      B        d     Max.RPM
                                                                        61450 4-knife replacement cutter   100MM 4.0MM     22MM     13,300
                                                                        61452 8-knife replacement cutter   100MM 4.0MM     22MM     13,300

                                          Cutter 61452 shown                    Replacement Parts:
                  BG-TEST                                                       Order                                        Qty. Required
                  167-010                                                       No.    Description                   Size   61450 61452
                                                                               *RCK-71 4-sided spur knife       14x14x1.2MM   2        4
                                                                               *RCK-18 4-sided plow knife       18x18x2.0MM   2        4
                                                                                67170 Screw retainer for RCK-70 4.0x.5x10MM   2        4
                                      D                                         67172 Screw retainer for RCK-18 4.0x.5x12MM   2        4
                                                                                67160 Flat head knife screws     4x.5x3.0MM   4        8
                                      d
                                                                                5090   Torx® key                     T-9      1        1

                                                               B
                                                                        *Note: Minimum order 10 each for RCK-18 and RCK-71.




      STRAIGHT CUTTERHEADS
      WITH CARBIDE INSERT KNIVES                                                 2-wing straight cutters featuring aluminum alloy body,
                                                                            2-sided carbide insert knives and four, 4-sided spur knives
                                                                            for a super clean finish. Choose either 30MM or 50MM
                                                                            cutting height.

                                                                                                                                      RPM
                                                                              Tool No.       D              B             d        Ideal/Max
                                                                               61460     100MM(4")     30MM(1-3/16")    1-1/4"    7600/12000
                                                                               61462     100MM(4")       50MM(2")       1-1/4"    7600/12000

                                                                             Replacement Parts:
                                                                             Order                                                   Qty.
                                                                             No.     Description                            Size   Required
                                                                            *RCK-70 4-sided spur knife                 14x14x2.0MM    4
                                                                            *RCK-30 2-sided 30MM knife                 30x12x1.5MM    2
                  BG-TEST                                                   *RCK-50 2-sided 50MM knife                 50x12x1.5MM    2
                                                                             67162 Slotted head knife screws            5.0x.8x5MM    4
                  167-002
                                                                             67142 Socket head knife screws             6.0x1.0MM     4
                                      D                                      WB-48 Wedge Blocks for 30MM knives            30MM       2
                                                                             WB-52 Wedge Blocks for 50MM knives            50MM       2
                                      d                                      5005    ‘L’ shaped hex key                    3.0MM      1
                                                                             67192 Knife setting gauge                    0.55MM      1


                                                                   B
                                                                        *Note: RCK-30, RCK-50 and RCK-70 minimum order 10 each.




      See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
      Products shown in Bold indicate most popular items.
170
                                                                    SHAPER CUTTERS & SETS
                                                                                   INSERT SHAPER CUTTERS
STRAIGHT CUTTERHEADS
WITH CARBIDE INSERT KNIVES
                                                                          2-wing straight cutters featuring solid tool-steel body,
                                                                     2-sided carbide insert knives and four, 4-sided spur knives
                                                                     for a super clean finish. Choose either 30MM or 50MM
                                                                     cutting height.

                                                                                                                               RPM
                                                                        Tool No.       D              B             d       Ideal/Max
                                                                         61470     125MM(5")     30MM(1-3/16")    1-1/4"   6100/10300
                                                                         61472     125MM(5")       50MM(2")       1-1/4"   6100/10300

                                                                       Replacement Parts:
                                                                       Order                                                   Qty.
                                                                       No.     Description                            Size   Required
                                                                      *RCK-70 4-sided spur knife                 14x14x2.0MM    4
                                                                      *RCK-30 2-sided 30MM knife                 30x12x1.5MM    2
             BG-TEST                                                  *RCK-50 2-sided 50MM knife                 50x12x1.5MM    2
                                                                       67162 Slotted head knife screws            5.0x.8x5MM    4
             167-003
                                                                       67142 Socket head knife screws             6.0x1.0MM     4
                                  D                                    WB-48 Wedge blocks for 30MM knives            30MM       2
                                   d                                   WB-52 Wedge blocks for 50MM knives            50MM       2
                                                                       5005    ‘L’ shaped hex key                    3.0MM      1
                                                                       67192 Knife setting gauge                    0.55MM      1

                                                            B
                                                                  *Note: RCK-30, RCK-50 and RCK-70 minimum order 10 each.




SHEAR CUTTERHEADS
WITH CARBIDE INSERT KNIVES                                               4-wing straight cutters with alternating up/down shear
                                                                     angle featuring solid tool-steel body, 2-sided carbide insert
                                                                     knives and four, 4-sided spur knives for a super clean finish.
                                                                     Choose either 30MM or 50MM cutting height. Shear action
                                                                     gives fast, clean cuts.
                                                                                                                               RPM
                                                                        Tool No.       D              B             d       Ideal/Max
                                                                         61480     125MM(5")     30MM(1-3/16")    1-1/4"   6100/10300
                                                                         61482     125MM(5")       50MM(2")       1-1/4"   6100/10300

                                                                       Replacement Parts:
                                                                       Order                                                   Qty.
                                                                       No.     Description                            Size   Required
                                                                      *RCK-70 4-sided spur knife                 14x14x2.0MM    4
                                                                      *RCK-30 2-sided 30MM knife                 30x12x1.5MM    4
                                                                      *RCK-50 2-sided 50MM knife                 50x12x1.5MM    4
             BG-TEST
                                                                       67162 Slotted head knife screws            5.0x.8x5MM    4
             167-003
                                                                       67142 Socket head knife screws             6.0x1.0MM     8
                                  D                                    WB-72 Wedge blocks for 30MM knives            30MM       4
                                                                       WB-70 Wedge blocks for 50MM knives            50MM       4
                                  d                                    5005    ‘L’ shaped hex key                    3.0MM      1
                                                                       67192 Knife setting gauge                    0.55MM      1


                                                            B
                                                                  *Note: RCK-30, RCK-50 and RCK-70 minimum order 10 each.




See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
                                                                                                                                        171
SHAPER CUTTERS & SETS
      MULTI PRO™ SHAPER CUTTERS

                                                                                                                      TM

                                       M u l t i P                                                  R       O
                                       SHAPER CUTTERS
          ENDLESS POSSIBILITIES are yours when you purchase this set of 5 Carbide Tipped
                2-Wing Cutters allowing you to execute countless profiles and shapes.

                                                 SCS-2000 Complete Set w/30MM Bore.
                                                 SCS-2100 Complete Set w/1-1/4" Bore.



                                                                                                                                                 1




                                                                                                             5
                                                                    Cutter
                                                        Tool No.     No.        D        d     B




                                                                                                             2.5


                                                                                                                               6
                                                                                                                           R
                                                        SCS2000-1     1      140MM 30MM 5MM
                                                                                                                                                 2




                                                                                                             6.5
                                                        SCS2000-2     2      140MM 30MM 9MM




                                                                                                                          R6
                                                        SCS2000-3     3      140MM 30MM 12.5MM




                                                                                                             2.5
                                                        SCS2000-4     4      140MM 30MM 20MM




                                                                                                                               6
                                                                                                                               R
                                                        SCS2000-5     5      140MM 30MM 28MM                                                     3




                                                                                                             4 6
                                                       *BU-942       —       1-1/4x30MM
                                                                             5 pc. bushing set




                                                                                                             6 4 10
                                                                                                                                                 4
                                                                 Cutter
                                                        Tool No.  No.           D         d       B
                                                        SCS2100-1 1          140MM 1-1/4" 5MM
                                                                                                                      R
                                                        SCS2100-2 2          140MM 1-1/4" 9MM                             12

                                                        SCS2100-3 3          140MM 1-1/4" 12.5MM
                                                                                                             16




                                                        SCS2100-4 4          140MM 1-1/4" 20MM                                         12        5
                                                                                                                                   R
                                                        SCS2100-5 5          140MM 1-1/4" 28MM
                                                                                                             12




                                                       *BU-940    —           1-1/4 5 pc. bushing set
                                                       *Not included in sets


           The following are illustrations showing the different profiles and combinations based on single, double and triple cut. We have
                           enclosed a set of spacers to adjust the spacing as needed. (Illustrations shown approx. 30%)



                                                                                                        2                                        3
                                  1                                  2                                                                           4
                                                                                                                      1
                                  2                                  1
                                                                                                         2                                   2
                                   4                                   1                                 1
                                                                                                                                             2
                                                                       3                                 2
                                   1
                                                                                                                                             3
                                                                       4                                 4
                                   3
                                                                                                                                             3
                                                                                                         1

                                                                                                         4




      See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
      Products shown in Bold indicate most popular items.
172
                                                SHAPER CUTTERS & SETS
                                                    MULTI PRO™ SHAPER CUTTERS

                                                                    3                   2
    4
                                2                                       2                       2
        2                               3
        1
                                                                                                4
        1                       2                                   3
        2                               5                                                   5
                                                                        4
                3


            3                       4                                                   5
                                                                    4
             4
                                    4                                   3
                                                                                        5
    3
            3                           4
                                            5       4                                       4
        3

        5
                                                    4                                           4

4                           4


                            4                       1                                               1
4



    2
                                4                                           2
            4                                                                   1
                                            4
            1                                                                   1
                                            3                               2
        1
        3
                2                   3                           5                   5
                                    5
    4                                                           5                   5
        5                           5
            3                                               4                                   4
    2
                                            4
            5
                                            4               4                                   4
            5                       5
                                                        2                                               2
                                                1                                                               1
4                       2
                            1
    3                                                   4                                           4
                                                    4                                                   4
            5                               4
                    1
                                            4
                                                            2                                   2
    4                                   5
        4                                           3                                                       3
            4

                                                                                                            173

				
DOCUMENT INFO