Docstoc

AGENDA MESYUARAT

Document Sample
AGENDA MESYUARAT Powered By Docstoc
					ANNUAL REPORT
    2003
                                                                     ISC F 1-04   N7


                            CONTENTS                                    PAGE

1- Scope                                                                   3

2- Composition of membership                                             3-4

3- List of Technical Committee and Working Groups                          4

4- Summary of work programme of Technical Committee and                  5 - 14
   Working Group

5- List of Malaysian Standards approved in 2003                         15 - 18

6- List of Malaysian Standards confirmed by ISC F in 2003                 18

7- List of Malaysian Standards approved for withdrawal by ISC F in        18
   2003
8- Status of Malaysian participation in ISO/TCs and SCs                   19

9- Other administrative issue

9.1- Restructuring of committees under ISC F                            20 – 21

9.2- List of MS transferred to or from another ISC                        22

Annex: Scope of committees (under the new structure)                    23 - 24




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC    2
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                           ISC F 1-04   N7
1.      SCOPE

Standardisation of terms and definitions, methods of measurement, codes of practice, test
methods, sampling, specifications, classifications for mechanical engineering products,
mechanical processes and production engineering.

Excluded:

- measurement of fluid flow of petroleum and petroleum products


2.      COMPOSITION OF MEMBERSHIP

Chairman                 Tuan Hj Ir Abu Bakar Che Man
                         Institut Keselamatan dan Kesihatan Pekerjaan Malaysia

Secretary                Puan Zur'ain Madon
                         SIRIM Berhad

Member organisation                                    Representative

Institusi Jurutera Malaysia                            Ir Aaron lee Kuang Chao
                                                       Ir Loh Lim Huat

Institut Keselamatan dan Kesihatan                     Encik Amirrudin Abdul Aziz
Pekerjaan Malaysia

Jabatan Keselamatan dan Pembekalan                     Ir Ahmad Fauzi Hassan
Gas, Suruhanjaya Tenaga                                Ir Roslee Esman

Jabatan Keselamatan, Kesihatan dan                     Ir Rosli Hussin (until 03/11)
Pekerjaan Malaysia                                     Ir Amir Hj Yahaya (starting 03/11)

Jabatan Standard Malaysia                              Encik Nazlan Mohd Said

STRIDE, Kementerian Pertahanan, Malaysia               Ir Boey Hor Meng
                                                       Dr Roslan Abd. Aziz

Lembaga Kemajuan Perindustrian Malaysia                Encik N. Sangaran

Malaysian Iron and Steel Industry Federation           Tan Sri Dato' Soong Siew Hoong
                                                       Cik Chew Swee Leng

Petroliam Nasional Berhad (PETRONAS)                   Encik Lau Nai Tuang
                                                       Encik Azizi Ismail

Seksyen Pengujian Produk Mekanikal,                    Encik Suhaimi Mahmood
SIRIM QAS (I) Sdn Bhd                                  Encik Nik Md. Riffin

Universiti Kebangsaan Malaysia                         Prof Madya Dr Mohd Jailani Mohd
                                                       Nor
                                                       Dr Nordin Jamaludin




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC             3
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                             ISC F 1-04   N7
Member organisation                                       Representative

Universiti Malaya                                         Prof Dr Masjuki Hj Hassan

Universiti Teknologi Malaysia                             Dr Kamarul Baharin Tawi (until
                                                          24/07)
                                                          Dr Amran Alias (starting 24/07)

Jabatan Kerja Raya                                        Encik Ramli Md Yusoff


3.      LIST OF TECHNICAL COMMITTEE AND WORKING GROUP
        (as of 31 December 2003)

3.1     TC on Water Meter

3.2     TC on Helmet

3.3     TC on Test Methods for Metallic Materials

3.4     TC on Furniture

3.5             WG on School Furniture

3.6     TC on Draw-Off Taps

3.7     TC on Stop-Valves

3.8     TC on Gas Cooking Appliances

3.9     TC on Non-Destructive Testing (NDT)

3.10    TC on Energy Efficiency and Renewable Energy in Building

3.11    TC on Fasterners and Screw Threads

3.12    TC on Boilers and Pressure Vessels

3.13    TC on Welding and Allied Processes

3.14    TC on Ferrous Metal Pipes and Metallic Fittings

3.15    TC on Tools

3.16    TC on Gas Cylinders, Accessories and Appliances

3.17            WG on LPG Equipment and Accessories

3.18    WG on V-Industrial Belts




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC            4
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                     ISC F 1-04   N7
4.      SUMMARY OF WORK PROGRAMME OF TECHNICAL COMMITTEE AND
        WORKING GROUP

4.1     TC ON WATER METER

        Chairman:          Encik Suhaimi Mahmood
                           SIRIM QAS (I) Sdn Bhd

        Secretary:         Cik Intan Fadhlina Mohamed

    Dates of                                        27/03, 19/06, 30/07
     meeting
  No. of NWIP
  approved in                                                  1
      2003
   No. of NWI
  registered in                                                1
      2003
  No. of FDMS
   accepted in                                                 6
      2003
                                            Title of project                          Stage at the end
Active project in                                                                       of Dec 2003
WP as at Dec 03      Measurement of water flow in closed conduits-Meters for cold          30.20
                     portable water-Part 1: Specification


4.2     TC ON HELMET

        Chairman:          Prof Madya Dr Ter Ser Kok
                           Independent

        Secretary:         Cik Intan Fadhlina Mohamed

    Dates of                                            17/03, 07/07
     meeting
   No. of NWI
  approved in                                                  -
      2003
   No. of NWI
  registered in                                                -
      2003
  No. of FDMS
   accepted in                                                 -
      2003
                                            Title of project                          Stage at the end
Active project in                                                                       of Dec 2003
WP as at Dec 03      Specification for helmets for pedal cyclists and for users of         40.60
                     skateboards and rollerskates and non-motorised scooter
                     Specification for protective helmets for vehicle users                30.20




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                      5
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                        ISC F 1-04   N7
4.3     TC ON TEST METHODS FOR METALLIC MATERIALS

        Chairman:          Prof Madya Dr Ter Ser Kok
                           Independent

        Secretary:         Cik Intan Fadhlina Mohamed

    Dates of                                                 08/05
     meeting
   No. of NWI
  approved in                                                    1
      2003
   No. of NWI
  registered in                                                  -
      2003
  No. of FDMS
   accepted in                                                   -
      2003
                                              Title of project                           Stage at the end
                                                                                           of Dec 2003
                     ISO systems limits and fits-Table of standard tolerance grades           30.20
                     and limit deviations for holes and shafts
Active project in    Metallic materials-uninterrupted uniaxial creep testing in               30.20
WP as at Dec 03      tension-Method of testing
                     Metallic materials-Verification of static uniaxial testing               30.20
                     machines-Part 2: Tension creep testing machines-Verification
                     of the applied load


4.4     TC ON FURNITURE

        Chairman:          Encik Mohd Arshad Saru
                           FRIM

        Secretary:         Puan Zur'ain Madon

    Dates of                              23/01, 18/02, 17/03, 24/04, 22/05, 26/06,
     meeting                                  24/07, 21/08, 18/09, 06/10, 11/12
   No. of NWI
  approved in                                                    5
      2003
   No. of NWI
  registered in                                                  6
      2003
  No. of FDMS
   accepted in                                                   3
      2003
                                              Title of project                           Stage at the end
                                                                                           of Dec 2003
                     Furniture – Seating – Part 1: Requirements for the strength and          40.60
                     durability of the structure of domestic and contract seating
                     Furniture – Seating – Part 2: Test methods for the                       40.60
                     determination of strength and durability (domestic)
Active project in    Furniture – Seating – Part 3: Determination of stability                 50.00
WP as at Dec 03      (domestic)
                     Furniture – Tables – Part 1: Requirements for strength,                  40.20
                     durability and stability of tables and trolleys for domestic and
                     contract use
                     Furniture – Tables – Part 2: Test methods for determination of           40.20
                     strength, durability and stability (domestic)
                     Specification for gas cylinder trolleys                                  20.00


(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                         6
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                               ISC F 1-04   N7
4.5     TC ON DRAW-OFF TAPS

        Chairman:          Ir Low Poh Fee
                           JKR

        Secretary:         Cik Intan Fadhlina Mohamed

    Dates of                                             19/03, 28/08, 25/09
     meeting
   No. of NWI
  approved in                                                       -
      2003
   No. of NWI
  registered in                                                     -
      2003
  No. of FDMS
   accepted in                                                      -
      2003
                                                 Title of project               Stage at the end
Active project in                                                                 of Dec 2003
WP as at Dec 03      Specification for draw-off taps                                 30.20


4.6     TC ON STOP VALVES

        Chairman:          Ir Low Poh Fee
                           JKR

        Secretary:         Cik Intan Fadhlina Mohamed

    Dates of                                             19/03, 28/08, 25/09
     meeting
   No. of NWI
  approved in                                                       -
      2003
   No. of NWI
  registered in                                                     -
      2003
  No. of FDMS
   accepted in                                                      -
      2003
                                                 Title of project               Stage at the end
                                                                                  of Dec 2003
Active project in    Specification of ferrules                                       40.60
WP as at Dec 03
                     Specification for piston type float operated valves             30.20
                     Specification for stop-valves                                   40.60




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                7
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                        ISC F 1-04   N7
4.7     TC ON GAS COOKING APPLIANCES

        Chairman:          Encik Yusni Shariff
                           Jabatan Keselamatan dan Pembekalan Gas

        Secretary:         Puan Anuja Balachandran

    Dates of                                             26/06, 07/08,
     meeting                                              30/09,19/11
   No. of NWI
  approved in                                                    4
      2003
   No. of NWI
  registered in                                                  4
      2003
  No. of FDMS
   accepted in                                                   -
      2003
                                              Title of project                           Stage at the end
                                                                                           of Dec 2003
                     Commercial gas cooking appliances for use with liquefied                 30.20
                     petroleum gases – Part 1: Specification (Requirements)
Active project in    Commercial gas cooking appliances for use with liquefied                 20.00
WP as at Dec 03      petroleum gases – Part 2: General Construction
                     Commercial gas cooking appliances for use with liquefied                 30.20
                     petroleum gases – Part 1:Test Methods
                     Commercial gas cooking appliances for use with liquefied                 20.00
                     petroleum gases – Part 1:Glossary



4.8     TC ON LIFTING DEVICES

        Chairman:          Prof Madya Qua Hock Chye
                           Independent

        Secretary:         Puan Anuja Balachandran

    Dates of                                          09/01,16/04, 26/05,
     meeting                                          07/07, 25/08, 22/10
   No. of NWI
  approved in                                                    6
      2003
   No. of NWI
  registered in                                                  8
      2003
  No. of FDMS
   accepted in                                                   4
      2003
                                              Title of project                           Stage at the end
                                                                                           of Dec 2003
                     Cranes – Classification – Part 3: Tower cranes                           50.50
                     Cranes and lifting appliances – Classification – Part 1: General         50.50
Active project in
WP as at Dec 03      Stranded wire ropes for mine hoisting – Fibre components –               50.50
                     Characteristics and tests
                     Stranded wire ropes for mine hoisting – technical delivery               50.50
                     requirements
                     Steel wire ropes for lifts - Minimum requirements                        30.20
                     Steel wire ropes for general purposes – Minimum requirements             20.00

(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                         8
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                     ISC F 1-04   N7

                                             Title of project                         Stage at the end
                                                                                        of Dec 2003
                     Stranded wire ropes for mine hoisting – impregnating                  20.00
Active project in    compounds, lubricants and service dressings – Characteristics
WP as at Dec 03      and tests
                     Thimbles for wire ropes – Specification                               20.00
                     Bordeaux connections - Specification                                  20.00



4.9     TC ON NON-DESTRUCTIVE TESTING (NDT)

        Chairman:          Dr Khazali Hj Md. Zin
                           SIRIM Berhad

        Secretary:         Puan Siti Mariam Rahmat

    Dates of                                            28/05, 29/07,
     meeting                                            03/09, 20/10
   No. of NWI
  approved in                                                   -
      2003
   No. of NWI
  registered in                                                 -
      2003
  No. of FDMS
   accepted in                                                  1
      2003
                                             Title of project                         Stage at the end
                                                                                        of Dec 2003
                     Recommended Practice For Radiographic Examination Of
Active project in    Fusion Welded Joints : Part 2: Fusion Welded Joints In Steel          30.20
WP as at Dec 03      Plates And Pipes Of Above 50 Mm Up To And Including 200
                     Mm Wall Thickness (First Revision)



4.10    TC ON ENERGY EFFICIENCY AND RENEWABLE ENERGY IN BUILDING

        Chairman:          Y Bhg Dato Ir Mohd Anas Mohd Nor
                           Suruhanjaya Tenaga

        Advisor:           Puan Siti Mariam

* No activities*




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                      9
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                       ISC F 1-04   N7
4.11    TC ON FASTENERS AND SCREW THREADS

        Chairman:          Encik Zulkafli Yusoff
                           Universiti Teknologi Malaysia

        Secretary:         Puan Marina Mahdar

    Dates of                                            16/01, 27/03, 29/05,
     meeting                                                02/07, 09/09
   No. of NWI
  approved in                                                     5
      2003
   No. of NWI
  registered in                                                   5
      2003
  No. of FDMS
   accepted in                                                    12
      2003
                                               Title of project                          Stage at the end
Active project in                                                                          of Dec 2003
WP as at Dec 03      Specification for bull dog grips                                         20.20



4.12    TC ON BOILERS AND PRESSURE VESSELS

        Chairman:          Encik Zahrim Osman
                           Jabatan Keselamatan, Kesihatan dan Pekerjaan Malaysia

        Secretary:         Puan Anuja Balachandran

    Dates of                                                   26/02
    meeting
   No. of NWI
  approved in                                                     -
      2003
   No. of NWI
 registered in                                                    -
      2003
 No. of FDMS
  accepted in                                                     -
      2003
Active project in    This committee undertakes the activities of handling Malaysian participation for
WP as at Dec 03      ISO/TC 11. No development of MS at the moment.




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                         10
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                     ISC F 1-04   N7
4.13    TC ON WELDING AND ALLIED PROCESSES

        Chairman:          Dr Khazali Hj Md. Zin
                           SIRIM Berhad

        Secretary:         Puan Noranisazila Abd. Rahim

    Dates of                                         19/03, 19/05, 29/12
     meeting
   No. of NWI
  approved in                                                   1
      2003
   No. of NWI
  registered in                                                 1
      2003
  No. of FDMS
   accepted in                                                  -
      2003
                                             Title of project                         Stage at the end
Active project in                                                                       of Dec 2003
WP as at Dec 03
                     Specification and approval of welding procedures for metallic         30.20
                     materials – Part 1: General rules for fusion welding



4.14    TC ON FERROUS METAL PIPES AND METALLIC FITTINGS

        Chairman:          Prof Madya Issham Ismail
                           Universiti Teknologi Malaysia

        Secretary:         Puan Marina Mahdar

    Dates of                                            20/02, 24/04,
     meeting                                            19/06, 26/08
   No. of NWI
  approved in                                                   -
      2003
   No. of NWI
  registered in                                                 1
      2003
  No. of FDMS
   accepted in                                                  4
      2003
                                             Title of project                         Stage at the end
Active project in                                                                       of Dec 2003
WP as at Dec 03      Specification for welded and seamless carbon steel pipes for          20.20
                     general pressure purposes




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                    11
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                             ISC F 1-04   N7
4.15    TC ON TOOLS

        Chairman:          Ir Halim Azhar bin Hj Mohd Yatim
                           Institut Latihan Perindustrian Ipoh

        Secretary:         Puan Noranisazila Abd. Rahim

    Dates of                                    16/03, 16/06, 30/09, 16/12
    meeting
   No. of NWI
  approved in                                                  3
      2003
   No. of NWI
  registered in                                                3
      2003
  No. of FDMS
   accepted in                                                 -
      2003
                                            Title of project                  Stage at the end
                                                                                of Dec 2003
                     MS 704:1981 Specification for Hacksaw Blades                  30.20
Active project in
WP as at Dec 03      MS 706:1981 Specification for Cold Chisel                     30.20
                     MS711: 1981 Specification for Screwdriver                     30.20



4.15    TC ON GAS CYLINDERS, ACCESSORIES AND APPLIANCES

        Chairman:          Encik Zahrim Osman
                           Jabatan Keselamatan, Kesihatan dan Pekerjaan Malaysia

        Secretary:         Puan Salbiah Yaakop

    Dates of                                         14/01, 20/02, 15/04,
     meeting                                             09/06, 16/07
   No. of NWI
  approved in                                                  4
      2003
   No. of NWI
  registered in                                                4
      2003
  No. of FDMS
   accepted in                                                 1
      2003
                                            Title of project                  Stage at the end
Active project in                                                               of Dec 2003
WP as at Dec 03
                     Gas cylinders – Safe handling                                 30.20




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC            12
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                      ISC F 1-04   N7
4.16    WG ON LPG EQUIPMENT AND ACCESSORIES

        Chairman:           Encik Ismail Shafii
                            Jabatan Keselamatan dan Pembekalan Gas

        Secretary:          Cik Intan Fadhlina Mohamed

    Dates of                                       12/03, 20/04, 07/05, 11/06,
     meeting                                              13/08, 29/09
   No. of NWI
  approved in                                                      -
      2003
   No. of NWI
  registered in                                                    -
      2003
  No. of FDMS
   accepted in                                                     -
      2003
                                               Title of project                        Stage at the end
                                                                                         of Dec 2003
                     Specification for valves for use with domestic liquefied               40.92
Active project in
                     petroleum gas
WP as at Dec 03
                     Specification for pressure regulators and automatic changeover         30.20
                     devices for liquefied petroleum gas



4.17    WG ON V-INDUSTRIAL BELTS

        Chairman:           Prof Dr Masjuki Hj Hassan
                            Universiti Malaya

        Secretary:          Puan Noranisazila Abd. Rahim

    Dates of                                                   24/03
    meeting
   No. of NWI
  approved in                                                      -
      2003
   No. of NWI
  registered in                                                    -
      2003
  No. of FDMS
   accepted in                                                     -
      2003
                                                Title of project                         Stage at the
Active project in                                                                        end of Dec
WP as at Dec 03                                                                             2003
                     Specification for industrial V-Belts                                   30.20




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                     13
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                     ISC F 1-04   N7
4.18    WG ON SCHOOL FURNITURE

        Chairman:          Encik Mohd Arshad Saru
                           FRIM

        Secretary:         Puan Anuja Balachandran

    Dates of                                  29/01, 26/02, 24/04, 22/05, 27/06,
     meeting                                     05/08, 28/08, 02/10, 29/12
   No. of NWI
  approved in                                                     -
      2003
   No. of NWI
  registered in                                                   2
      2003
  No. of FDMS
   accepted in                                                    -
      2003
                                               Title of project                         Stage at the
                                                                                        end of Dec
Active project in                                                                          2003
WP as at Dec 03      Furniture – Student chairs, tables and stools for educational         30.20
                     institutions – Specification
                     Furniture – Canteen tables and benches for educational                20.00
                     institutions - Specification




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                    14
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                              ISC F 1-04   N7
5.     LIST OF MALAYSIAN STANDARDS APPROVED IN 2003

Approved date: 19 February 2003

5.1    MS 1580:2003
       Cranes – Test codes and procedures

5.2    MS ISO 7500-1:2003
       Metallic materials – Verification of static uniaxial testing machines – Part 1:
       Tension/compression testing machines – Verification and calibration of the force-
       measuring system

5.3    MS ISO 9513:2003
       Metallic materials – Calibration of extensometers used in uniaxial testing

5.4    MS 1581:Part 1:2003
       Furniture – Storage units – Part 1: Safety requirements and test methods

5.5    MS 1581:Part 2:2003
       Furniture – Storage units – Part 2: Methods for determination of strength and
       durability

5.6    MS ISO 1581:Part 3:2003
       Furniture – Storage units – Part 3: Methods for determination of stability

5.7    MS ISO 376:2003
       Metallic materials – Calibration of force – Proving instruments used for the verification
       of uniaxial testing machines

5.8    MS 1317:Part 1:2003
       Recommended practice for radiographic examination of fusion welded joints: Part 1:
       Fusion welded joints in steel plates and pipes of up to and including 50 mm wall
       thickness (First revision)

5.9    MS ISO 6506-1:2003
       Metallic materials – Brinell hardness test – Part 1: Test method (First revision)

5.10   MS ISO 6506-2:2003
       Metallic materials – Brinell hardness test – Part 2: Verification and calibration of
       testing machines (First revision)

5.11   MS ISO 6506-3:2003
       Metallic materials – Brinell hardness test – Part 3: Calibration of reference blocks
       (First revision)

Approved date: 11 April 2003

5.12   MS ISO 965-2:2003
       ISO general purpose metric screw threads – Tolerances – Part 2: Limits of sizes for
       general purpose external and internal screw threads – Medium quality

Approved date: 13 May 2003

5.13   MS ISO 5408:2003
       Fasteners and screw threads – Vocabulary: Part 1: Fundamental of screw threads

5.14   MS ISO 1891:2003
       Fasteners and screw threads – Vocabulary: Part 2: Terminology and nomenclature

(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC              15
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                          ISC F 1-04   N7
5.15   MS ISO 225:2003
       Fasteners and screw threads – Vocabulary: Part 3: Symbols and designation of
       dimensions of bolts, screws, studs and nuts
5.16   MS ISO 7-1:2003
       Pipe threads where pressure-tight joints are made on the threads – Part 1:
       Dimensions, tolerances and designation

5.17   MS ISO 7-2:2003
       Pipe threads where pressure-tight joints are made on the threads – Part 2:
       Verification by means of limit gauges

5.18   MS ISO 228-1:2003
       Pipe threads where pressure-tight joints are not made on the threads – Part 1:
       Dimensions, tolerances and designation

5.19   MS ISO 228-2:2003
       Pipe threads where pressure-tight joints are not made on the threads – Part 2:
       Verification by means of limit gauges

5.20   MS ISO 2901:2003
       ISO metric trapezoidal screw threads – Basic profile and maximum material profiles

5.21   MS ISO 2902:2003
       ISO metric trapezoidal screw threads – General plan

5.22   MS ISO 2903:2003
       ISO metric trapezoidal screw threads – Tolerances

5.23   MS ISO 2904:2003
       ISO metric trapezoidal screw threads – Basic dimensions

Approved date: 30 June 2003

5.24   MS ISO 1502:2003
       ISO general purpose metric screw threads – Gauges and gauging

5.25   MS ISO 965-3:2003
       ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for
       constructional screw threads

5.26   MS ISO 965-4:2003
       ISO general purpose metric screw threads – Tolerances – Part 4: Limits of sizes for
       hot-dip galvanized external screw threads to mate with internal screw threads tapped
       with tolerance position H or G after galvanizing

5.27   MS ISO 965-5:2003
       ISO general purpose metric screw threads – Tolerances – Part 5: Limits of sizes for
       internal screw threads to mate with hot-dip galvanized external screw threads with
       maximum size of tolerance position H before galvanizing

Approved date: 10 September 2003

5.28   MS ISO 7858-1:2003
       Measurement of water flow in closed conduits – Combination meters for cold potable
       water – Part 1: Specification




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC             16
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                             ISC F 1-04   N7
5.29   MS ISO 7858-2:2003
       Measurement of water flow in closed conduits – Combination meters for cold potable
       water – Part 2: Installation

5.30   MS ISO 7858-3:2003
       Measurement of water flow in closed conduits – Combination meters for cold potable
       water – Part 3: Test methods

Approved date: 07 October 2003

5.31   MS 1711:Part 1:2003
       Furniture – Office chair (adjustable): Part 1: Dimensions – Determination of
       dimensions

5.32   MS 1711:Part 2:2003
       Furniture – Office chair (adjustable) – Part 2: Safety requirements

5.33   MS 1711:Part 3:2003
       Furniture – Office chair (adjustable) – Part 3: Safety test methods

5.34   MS ISO 898-1:2003
       Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1:
       Bolts, screws and studs

5.35   MS ISO 898-2:2003
       Mechanical properties of fasteners – Part 2: Nuts with specified proof load values –
       Coarse thread

5.36   MS ISO 898-5:2003
       Mechanical properties of fasteners made of carbonsteel and alloy steel – Part 5: Set
       screws and similar threaded fasteners not under tensile stresses

5.37   MS ISO 898-6:2003
       Mechanical properties of fasteners – Part 6: Nuts with specified proof load values –
       Fine pitch thread

5.38   MS ISO 898-7:2003
       Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for
       bolts and screws with nominal diameters 1 mm to 10 mm

Approved date: 10 December 2003

5.39   MS 1720:2003
       Welded carbon steel gas cylinders – Periodic inspection and testing

5.40   MS ISO 4064-2:2003
       Measurement of water flow in closed conduits – Meters for cold potable water – Part
       2: Installation requirements and selection

5.41   MS ISO 4064-3:2003
       Measurement of water flow in closed conduits – Meters for cold potable water – Part
       3: Test methods and equipment

5.42   MS ISO 10385-1:2003
       Measurement of water flow in closed conduits – Meters for hot water – Part 1:
       Specifications



(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC            17
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                             ISC F 1-04   N7
5.43   MS ISO 4301-1:2003
       Cranes and lifting appliances – Classification – Part 1: General

5.44   MS ISO 4301-3:2003
       Cranes – Classification – Part 3: Tower Cranes

5.45   MS ISO 3154:2003
       Stranded wire ropes for mine hoisting – Technical delivery requirements

5.46   MS ISO 3155:2003
       Stranded wire ropes for mine hoisting – Fibre components – Characteristics and tests


6.     LIST OF MALAYSIAN STANDARDS CONFIRMED BY ISC F IN 2003

Confirmed through periodic review exercise

6.1    MS 799:1982 (Confirmed 2003)
       Glossary of mining terms

6.2    MS 865:1983 (Confirmed 2003)
       Glossary of drilling and blasting terms


7.     LIST OF MALAYSIAN STANDARDS APPROVED FOR WITHDRAWAL BY
       ISC F IN 2003

Decision made following periodic review exercise

7.1    MS 933:1984
       Specification for soiled linen trolleys

7.2    MS 928:1984
       Specification for hospital beds and cots

Replaced by new standard

7.3    MS 1246:Part 7:1991
       Strength and stability of furniture – Part 7: Methods for determination of strength of
       storage furniture

7.4    MS 1246:Part 8:1991
       Strength and stability of furniture – Part 8: Methods for determination of stability of
       storage furniture




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC            18
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                        ISC F 1-04   N7
8.       STATUS OF MALAYSIAN PARTICIPATION IN ISO/TCs AND SCs

              ISO Committee                      Status      Related TC under ISC F
ISO/TC 2: Fasteners                                O      TC on Fasteners and Screw
                                                          Threads
ISO/TC 5: Ferrous metal pipes and metallic         O
fittings
ISO/TC 5/SC 5: Threaded or plain end butt-         O      TC on Ferrous Metal Pipes and
welding fittings, threads, gauging of threads             Metallic Fittings
ISO/TC 5/SC 10: Metallic flanges and their         O
joints
ISO/TC 11: Boiler and pressure vessels             P      TC on Boilers and Pressure
                                                          Vessels
ISO/TC 30: Measurement of fluid flow in closed     O      TC on Water Meter
conduits
ISO/TC 44: Welding and allied processes            O      TC on Welding and Allied
                                                          Processes
ISO/TC 58: Gas cylinders                           P      TC on Gas Cylinders,
                                                          Accessories and Appliances
ISO/TC 96: Cranes                                  P
ISO/TC 96/SC 2: Terminology                        P
ISO/TC 96/SC3: Selection of wire ropes             P
ISO/TC 96/SC 4: Test methods                       P
ISO/TC 96/SC 5: Use, operation and                 P
maintenance
ISO/TC 96/SC 6: Mobile cranes                      P
ISO/TC 96/SC 7: Tower cranes                       P      TC on Lifting Devices
ISO/TC 96/SC 8: Jib cranes                         P
ISO/TC 96/SC 9: Bridge and gantry cranes           P
ISO/TC 105: Steel wire ropes                       O
ISO/TC 111: Round steel link chains, chain         O
slings, components and accessories
ISO/TC 135: Non-destructive testing                O      TC on Non-Destructive Testing
ISO/TC 135/SC 4: Eddy current methods              O      ISC F
ISO/TC 136: Furniture                              P
ISO/TC 136/SC 1: Test methods                      O
ISO/TC 136/SC 3: Specifications for properties     O
of materials and for workmanship
ISO/TC 136/SC 5: Domestic furniture                O      TC on Furniture
ISO/TC 136/SC 6: Office furniture                  O
ISO/TC 136/SC 7: Furniture for educational         O
institutions
ISO/TC 136/SC 9: Hardware for furniture            O
ISO/TC 164: Mechanical testing of metals           O      TC on Test Methods and
                                                          Metallic Materials
ISO/TC 178: Lifts, escalators, passenger           P      TC on Lifting Devices
conveyors **
ISO/TC 179: Masonry                                O      ISC F

**Upgraded from O- to P- members on 19 November 2003




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC        19
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                         ISC F 1-04   N7
9.       OTHER ADMINISTRATIVE ISSUE

9.1      RESTRUCTURING OF COMMITTEES UNDER ISC F

Proposal for the new structure of committees under ISC F was made and approved at the ISC
F meeting on the 31 July 2003. Meanwhile, proposal for the implementation period to adopt
the new structure was tabled and approved at the ISC F meeting on the 18 November 2003.

Methods of restructuring: (through either one of method listed below)

a-       merger of two or more existing TC/WG to form a new TC;

b-       establishment of new TC to accommodate a new areas under the mechanical
         engineering sector'

c-       redefined the scope of an existing TC.

List of committees under the new structure.

9.1.1    ISC F

9.1.2    TC on Furniture

9.1.3            WG on School Furniture

9.1.4    TC on Non-Destructive Testing (NDT)

9.1.5    TC on Lifting Devices

9.1.6            WG on Lifts and Escalators

9.1.7    TC on Boilers and Pressure Vessels

9.1.8    TC on Welding and Allied Processes

9.1.9    TC on Fasteners and Screw Threads

9.1.10 TC on Helmet

9.1.11 TC on Mechanical Testing of Metallic Materials

9.1.12 TC on Gas Equipment and Appliances

9.1.13           WG on Gas Cooking Appliances

9.1.14           WG on Gas Cylinders, Accessories and Appliances

9.1.15           WG on LPG Equipment and Accessories

9.1.16 TC on Metallic Pipes and Fittings

9.1.17 TC on Machinery and Components Engineering

9.1.18           WG on Tools

9.1.19           WG on V-Belts


(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC        20
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                    ISC F 1-04   N7
9.1.20 TC on Fluid Systems and Components

9.1.21         WG on Water Meter

9.1.22         WG on Stop-Valves

9.1.23         WG on Draw-Off Taps

Scope of each of the TC is defined in Annex A of this document.




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC   21
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                              ISC F 1-04   N7
9.2     LIST OF MS TRANSFERRED TO OR FROM ANOTHER ISC

List of MS transferred to another ISC

9.2.1   MS 740:1981
        Specification for hot-dip galvanised coatings on iron and steel

        Transferred to ISC B.

9.2.2   MS 407:1991
        Specification on zinc coatings on steel wire

        Transferred to ISC P

9.2.3   MS 739:1981
        Specification for hot-dip galvanised coatings on threaded fasteners

        Transferred to ISC B

9.2.4   MS 550:1978
        Specification for round steel wire ropes

        Transferred from ISC D to ISC F




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC             22
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                ISC F 1-04   N7
ANNEX: SCOPE OF COMMITTEE UNDER THE NEW STRUCTURE

TC ON FURNITURE

Standardisation in the field of furniture including terms and definitions, performance, safety
and dimensional requirements, requirements for specific components (such as hardware),
test methods.


TC ON NON-DESTRUCTIVE TESTING

Standardisation covering non-destructive testing as applied generally to constructional
materials, components and assemblies, by means of: glossary of terms, methods of test,
performance specifications for testing equipment and ancillary apparatus.

Excluded: quality levels, specifications for electrical equipment and apparatus.


TC ON LIFTING DEVICES

Standardisation of all aspects including terminology, load rating, basic design criteria, testing,
safety, general design principles, maintenance and operation in the field of

   cranes
   of steel wire ropes, wire rope terminations, wire rope slings
   of round steel link chains, sling hooks, shackles, eyebolts, terminal links, joining links and
    terminal fittings for slings and other accessories
   of lifts, service lifts, escalators, passenger conveyors and similar apparatus.

And related equipment which suspend loads by means of a load handling device.


TC ON BOILERS AND PRESSURE VESSELS

(Identical to ISO/TC11)

Standardisation of construction of boilers and pressure vessels.

Excluded: railway and marine boilers, cylinders, aircraft and vehicle components, equipment
used for fire-fighting, personal safety equipment, components of rotating or reciprocating
devices, nuclear pressure equipment, piping systems, cryogenic vessels.

Note: Construction is an all-inclusive term that includes design, materials, fabrication,
examination, inspection, testing and conformity assessment.


TC ON WELDING AND ALLIED PROCESSES

Standardisation of welding, by all processes, as well as allied processes; these standards
include terminology, definitions and the symbolic representation of welds on drawings,
apparatus and equipment for welding, raw materials (gas, parent and filler metals) welding
processes and rules, methods of test and control, calculations and design of welded
assemblies, welders' qualifications, as well as safety and health.

Excluded: electrical safety matters related to welding




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                23
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad
                                                                                  ISC F 1-04   N7
TC ON FASTENERS AND SCREW THREADS

Standardisation of dimensions, tolerances and verifications, mechanical and functional
properties, test methods and acceptance procedures for fasteners and screw threads.


TC ON HELMETS

None defined. Upon completion of the current active projects, the TC would be disbanded and
the standards related to the helmet would be transferred to the relevant ISC.


TC ON MECHANICAL TESTING OF METALLIC MATERIALS

Standardisation of methods for mechanical testing, including the verification and calibration of
equipment, that are used to determine the properties of metallic materials.


TC ON GAS EQUIPMENT AND APPLIANCES

Standardisation concerning classification, terminology, design, safety, performance and test
methods in the field of gas equipment, appliances and accessories.


TC ON METALLIC PIPES AND FITTINGS

Standardisation in the field of steel tubes, cast iron pipes, non-ferrous pipes, flexible metallic
tubes and metallic fittings, flanges, pipe supports, pipe threads and gauges, metallic and
organic coatings and protections.

Excluding: plastic pipes and hoses


TC ON MACHINERY AND COMPONENTS ENGINEERING

Standardisation of all types of machinery and its components including rolling and plain
bearings, shafts, industrial fans, filters, compressor, pneumatic machines, engines, tools
(machine and hand tools), dies, power transmission engineering (belts, pulleys, gears,
conveyor chains etc).


TC ON FLUID SYSTEMS AND COMPONENTS

Standardisation in the field of fluid systems and components, comprising terminology,
construction, principal dimensions, safety requirements, testing and inspection methods.

To include such components as accumulators, compressed air dryers, conductors (rigid and
flexible), cylinders, electro-hydraulic and electro-pneumatic components and systems, fittings,
fluidic devices, hose fittings and assemblies, filters and separators, fluids, hydraulic pumps,
motors, moving-part fluid- controls, pneumatic lubricators, regulators, quick-action couplings,
reservoirs, sealing devices, valves.




(1/2004) Meeting of Industry Standards Committee on Mechanical Engineering (ISC                  24
F)
Date: 29 April 2004
Time: 09.00 am
Venue: Bilik ISO, SIRIM Berhad

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:528
posted:3/23/2011
language:English
pages:24