Docstoc

DECORATIVE FINISHES

Document Sample
DECORATIVE FINISHES Powered By Docstoc
					     DECORATIVE FINISHES          ■    Use the product selector to find out the most suitable product for any given substrate


     PRODUCT SELECTOR




                                  USES                                  SUBSTRATE                                                           TYPE OF FINISH                                                                  APPLICATION




                                                                    MONOCOUCHE/ONE COAT RENDERS




                                                                                                                                                                                SPRAY TEXTURED - TYROLEAN
                                                                    PARISO HYDRAULIC MINERAL
                                                                    MONOREX AND MONOREX GF
                                                                    PARISO THIN COAT ACRYLIC




                                                                                                                                                                                                                                                   TYROLEAN APPLICATOR
                                                                                                  PARMUREX BASE COAT




                                                                                                                                                          ROLLED - HIGH BUILD
                                                                                                                       TRADIREX BASE COAT




                                                                                                                                                                                                            MINERAL STAIN




                                                                                                                                                                                                                             SPRAYING POT
                                      DECORATION




                                                                                                                                            MATT FINISH
                                                         CONCRETE




                                                                    FINISHES

                                                                    FINISHES




                                                                                                                                                                                                                                            HAND
     MINERAL COATING


     PARDECO TYROLIEN - p18
16                                                                                                                                                                                                                                                                                                17
     ORGANIC / ACRYLIC COATINGS


     CRYLANE - p20
     REVLANE ROULE - p22
     REVLASURE - p24

     SUBSTRATE STABILISATION


     REVLANE FIXATEUR - p26                        SYNTHETIC RESIN BASE LIQUID FOR REINFORCING CRUMBLY ON POROUS SURFACES
                                                                                                                                                                                                                                                                         UNDERCOAT AND FINISHES

                                                                                                                                                                                                                                                                         TO MONOCOUCHES
     PARDECO TYROLIEN
     TYROLEAN DECORATIVE RENDER FINISH




         FINISHES
         TYROLEAN
         SMOOTH-TYROLEAN




     DESCRIPTION                                   TECHNICAL CHARACTERISTICS                                                     INSTRUCTIONS
18
     A mineral decorative finish for external      COMPOSITION                                                                   SUBSTRATE PREPARATION
     vertical rendered masonry walls or as a       Hydraulic mortar containing:                                                   ■   Substrates must be clean, sound and
     finishing layer for traditional renders        ■ Cement.                                                                         dust-free.
     conforming to BS EN 13914-1.                   ■ Lime.                                                                       ■   Remove all traces of plaster, paint, etc.
                                                    ■ Siliceous and calcareous sand.                                              ■   The base coat must have a faultless, fine
     SUBSTRATES                                     ■ Mineral pigments.                                                               float-smoothed finish.
                                                    ■ Specific admixtures.                                                        ■   Line and level of substrates must
     SUITABLE FOR                                                                                                                     conform to BS EN 13914-1 (new
     ■   Base coats conforming to BS EN 13914-1.                                                                                      substrates).
     ■   PAREX grey weather-resistant base coats
         e.g. TRADIREX or PARMUREX.

     UNSUITABLE FOR
     ■   Exposed vertical substrates with a
         vertical incline above 10°.




                                                   The information provided in this document results from our knowledge of the products and our experience. On-site results may vary, in particular
                                                   according to the product application methods adopted. Where application methods not covered by this document are used, customers must request
                                                   specific additional information and/or carry out a representative test before using the products. The above-mentioned information in no way
                                                   constitutes a warranty relative to the use of the products. Our general terms and conditions of sale shall prevail, in any event, on the information
                                                   provided in this document. Prior to application, customers and users are requested to check that they have the latest version of this document.
■    A special Tyrolean finish
■    Different colours available
■    25 kg bag




EQUIPMENT REQUIRED
■    Hand operated tyrolean application machine.
■    Machine spray gun with adapted nozzle attachment.

PRODUCT PREPARATION
■    Water dosage:
     ■ Tyrolean application       6 – 6.5 litres per 25 kg bag
     ■ Spray gun application      5.5 – 6 litres per 25 kg bag
■    Mixing time                  5 minutes

APPLICATION                                                                                           PACKAGING
                                                                                                      25 kg bag.
TYROLEAN/SMOOTH TYROLEAN FINISH                                                                       2-ply paper and 1-ply polyethylene.
 ■   Apply from top to bottom in 2 or 3 successive coats.                                             Disposable wrapped pallet of 1200 kg.
 ■   For the smooth tyrolean finish, apply the last layer in a thicker consistency than normal.
     The smooth appearance is obtained by passing a plastic or stainless steel float over the         STORAGE
     firm grain before it has fully cured.                                                            1 year from date of manufacture if
                                                                                                      stored in unopened original packing
MINIMUM CONSUMPTION                                                                                   in dry conditions.
Tyrolean hand applicator                   5 kg/m2
Spray gun                                  7 kg/m2                                                    WARRANTY
                                                                                                      Manufacturer's liability.
PRECAUTIONS
■    For professional use only.                                                                       REFERENCE DOCUMENTS
■    Dampen the substrate prior to application. Dampen the render after application.              ■ BS 5628-3 Code of Practice for the
■    Do not apply to a frozen substrate or if there is a risk of frost.                             use of Masonry.
                                                                                                  ■ BS EN 13914-1 Code of practice for
■    Minimum application temperatures: +5°C for light colours, +8°C for dark colours.
     Over 30°C, special precautions must be taken.                                                  External Rendering.                                19
                                                                                                  ■ BS 8000 – Workmanship on Building
■    Each façade must be finished in a day.
■    Any joins must be on natural edges to avoid finish and shade variations.                       Sites.




                                                                                                      PRECAUTIONS
                                                                                                      Read and follow the guidelines in the Health
                                                                                                      and Safety datasheet for this product.

                                                                                                      TECHNICAL ASSISTANCE
                                                                                                      PAREX will, on request, provide information
                                                                                                      and assistance to companies in relation to the
                                                                                                      use of a specific product.

                                                                                                      Such     assistance     shall    not   be
                                                                                                      associated with structural and design
                                                                                                      conception, nor assume or accept liability
                                                                                                      for compliance of substrates, nor
                                                                                                      compliance to instructions provided.

                                                                                                              Technical Information


                                                                                                         0845 603 5530
                                                                                                                  LOCAL RATE CALL

                                                                                                      Download the technical datasheet and
                                                                                                      consult the health and safety document on
                                                                                                      our new site: www.parex.co.uk
     CRYLANE
     ACRYLIC COLOUR MATCHED RENDER PAINT




         FINISHES
         MATT




20
     DESCRIPTION                                    TECHNICAL CHARACTERISTICS                                                     INSTRUCTIONS
     Acrylic paint for decoration of indoor and      ■   Appearance: white or coloured (as per                                    Must comply with this datasheet and those
     outdoor walls.                                      colour chart) creamy liquid.                                             from BS EN 1062.
                                                     ■   Nature: acrylic styrene co-polymer
     SUBSTRATES                                          in dispersion.                                                           SUBSTRATE PREPARATION
                                                     ■   Density: 1.4 kg/dm3                                                      Acrylic paint for decoration of indoor and
     SUITABLE FOR                                    ■   Dry extract in weight: 63% ± 2%                                          outdoor walls.
     ■   Rough, binder-based
         (rendered) substrates.                     CLASSIFICATION                                                                EQUIPMENT REQUIRED
     ■   Blending in repaired or damaged areas to   NF T 36 005 Family | class 7.
                                                                                                                                   ■   Roller.
         one coat renders.                                                                                                         ■   Brush.
                                                                                                                                   ■   Spray.

                                                                                                                                  Clean all tools with water after application.

                                                                                                                                  PRODUCT PREPARATION
                                                                                                                                   ■   Thoroughly mix the product in the bucket
                                                                                                                                       until it is of an even consistency.




                                                    The information provided in this document results from our knowledge of the products and our experience. On-site results may vary, in particular
                                                    according to the product application methods adopted. Where application methods not covered by this document are used, customers must request
                                                    specific additional information and/or carry out a representative test before using the products. The above-mentioned information in no way
                                                    constitutes a warranty relative to the use of the products. Our general terms and conditions of sale shall prevail, in any event, on the information
                                                    provided in this document. Prior to application, customers and users are requested to check that they have the latest version of this document.
■   Good coverage
■   Applied with roller or brush and can be spray applied




APPLICATION
■   Using a brush or roller, apply CRYLANE in two coats, the 1st coat diluted with 10% water
    in volume, and the 2nd coat undiluted after the first coat has dried. Subject to weather
    conditions, CRYLANE will be touch dry in ± 6 hours and can receive a 2nd coat after 2 hours
    at + 20ºC and 65% relative humidity.
■   For blending in repairs, using a brush or roller, apply CRYLANE in two coats, the 1st coat
    diluted with 30% water in volume. Allow to dry and then if required apply a 2nd diluted
    coat until the desired effect is reached. With repairs, avoid applying the full concentration
    of paint as this will fill the pores of the render and change the appearance locally.

CONSUMPTION                                                                                              PACKAGING
■   0.3 to 0.5 kg/m2 per undiluted layer. Actual consumption may vary according to the                   20 kg bucket.
    condition and porosity of the substrate.
                                                                                                         STORAGE
PRECAUTIONS                                                                                              1 year from date of manufacture if
■   For professional use only.                                                                           stored in unopened original packing
■   Do not apply to a frozen substrate, where there is a risk of frost, on wet substrates, in rain       in dry, frost-free conditions.
    or foggy weather or if there is a strong, hot and dry wind.
■   Temperature range: +5°C to + 30ºC.                                                                   WARRANTY
■   Over 30°C, special precautions must be taken.                                                        Manufacturer's liability.

                                                                                                         REFERENCE DOCUMENTS
                                                                                                     ■   Standard NF T 36.005.
                                                                                                     ■   DTU 59.1.
                                                                                                     ■   BS EN 1062.

                                                                                                                                                          21




                                                                                                         PRECAUTIONS
                                                                                                         Read and follow the guidelines in the Health
                                                                                                         and Safety datasheet for this product.

                                                                                                         TECHNICAL ASSISTANCE
                                                                                                         PAREX will, on request, provide information
                                                                                                         and assistance to companies in relation to the
                                                                                                         use of a specific product.

                                                                                                         Such     assistance     shall    not   be
                                                                                                         associated with structural and design
                                                                                                         conception, nor assume or accept liability
                                                                                                         for compliance of substrates, nor
                                                                                                         compliance to instructions provided.

                                                                                                                 Technical Information


                                                                                                            0845 603 5530
                                                                                                                     LOCAL RATE CALL

                                                                                                         Download the technical datasheet and
                                                                                                         consult the health and safety document on
                                                                                                         our new site: www.parex.co.uk
     REVLANE ROULE
     HIGH BUILD DECORATIVE COATING




         FINISHES
         ROLLED (WOOLLEN,
         HONEYCOMBED FOAM, OAK
         LEAF, ETC)




22
     DESCRIPTION                                   TECHNICAL CHARACTERISTICS                                                     INSTRUCTIONS
     Organic binder-based decorative coating for   COMPOSITION                                                                   Application must comply with this
     external and internal walls.                   Ready-to-use paste/liquid containing:                                        datasheet.
                                                    ■ Synthetic resins.

     SUBSTRATES                                     ■ Mineral fillers.                                                           SUBSTRATE PREPARATION
                                                    ■ Pigments.                                                                   ■   The substrate must be flat, sound, clean,
     SUITABLE FOR                                   ■ Specific admixtures.                                                            dry and free from dust.
     ■   Shuttered concrete walls.                  ■ Apparent density: 1.7 kg/dm
                                                                                  3                                               ■   The line and level of the substrate in new
     ■   Traditional two coat renders.              ■ Grain size: 1.25 mm                                                             work must meet the requirements in
     ■   PAREX grey one-coat renders.               ■ Dry extract: 82%                                                                BS 8000.
     ■   PAREX PARISO range of Thermal              ■ Performance in fire: M1 classification                                      ■   It is recommended to apply a layer of
         Insulation Systems.                                                                                                          REVLANE REGULATEUR first with a
     ■   Old substrates: consult Parex.            CLASSIFICATION                                                                     woollen roller.
     ■   Internal walls, plaster substrates.        ■   NF T 36 005 Family II class 2b.                                           ■   On soft or porous bases, apply a layer of
                                                    ■   NF T 30 700 Type 3.2.                                                         REVLANE FIXATEUR and after drying, a
     UNSUITABLE FOR                                 ■   XP 84 403 Class D3.                                                           layer of REVLANE REGULATEUR.
     ■   Exposed substrates inclined by more                                                                                          (Consult datasheets for REVLANE
         than 10º off the vertical.                                                                                                   REGULATEUR and REVLANE FIXATEUR.

                                                                                                                                 EQUIPMENT REQUIRED
                                                                                                                                  ■   Stainless steel float.
                                                                                                                                  ■   Roller.

                                                                                                                                 Clean all tools with water after application.

                                                                                                                                 PRODUCT PREPARATION
                                                                                                                                  ■   Thoroughly mix the product in the bucket
                                                                                                                                      until it is of an even consistency.




                                                   The information provided in this document results from our knowledge of the products and our experience. On-site results may vary, in particular
                                                   according to the product application methods adopted. Where application methods not covered by this document are used, customers must request
                                                   specific additional information and/or carry out a representative test before using the products. The above-mentioned information in no way
                                                   constitutes a warranty relative to the use of the products. Our general terms and conditions of sale shall prevail, in any event, on the information
                                                   provided in this document. Prior to application, customers and users are requested to check that they have the latest version of this document.
■   Simple, rapid application
■   Structured appearance




APPLICATION
■   Apply REVLANE ROULE in an even thickness, using a flexible stainless steel float. Adjust
    the thickness according to the size of the largest grains.
■   Finish off with a roller (woollen, honeycombed foam, oak leaf) vertically or horizontally to
    obtain the required effect.

CONSUMPTION
■   2.5 to 3.5 kg/m2.

PRECAUTIONS
■   For professional use only.                                                                           PACKAGING
■   Do not apply to a frozen substrate, where there is a risk of frost, on wet substrates, in rain       25 kg bucket.
    or foggy weather or if there is a strong, hot and dry wind.
■   Temperature range: +5°C to + 30ºC.                                                                   STORAGE
■   In order to avoid traces of rust during application, only use stainless steel tools.                 1 year from date of manufacture if
■   To reduce the risk of joint marks when applying the product over a large surface, proceed            stored in unopened original packing
    in sections of 20 to 25 m2, delimited by a strip of adhesive tape showing the joint or not.          in dry, frost-free conditions away
■   Protection of parapet walls and exposed parts as per the instructions.                               from high temperatures.

                                                                                                         WARRANTY
                                                                                                         Manufacturer's liability.

                                                                                                         REFERENCE DOCUMENTS
                                                                                                     ■ Standard NF T 36 005.
                                                                                                     ■ Standard NF T 30 700.
                                                                                                     ■ Standard XP 84 403.

                                                                                                     ■ DTU 59.2.

                                                                                                     ■ BS 8000 – Workmanship on Building
                                                                                                                                                          23
                                                                                                       Sites.




                                                                                                         PRECAUTIONS
                                                                                                         Read and follow the guidelines in the Health
                                                                                                         and Safety datasheet for this product.

                                                                                                         TECHNICAL ASSISTANCE
                                                                                                         PAREX will, on request, provide information
                                                                                                         and assistance to companies in relation to the
                                                                                                         use of a specific product.

                                                                                                         Such     assistance     shall    not   be
                                                                                                         associated with structural and design
                                                                                                         conception, nor assume or accept liability
                                                                                                         for compliance of substrates, nor
                                                                                                         compliance to instructions provided.

                                                                                                                 Technical Information


                                                                                                            0845 603 5530
                                                                                                                     LOCAL RATE CALL

                                                                                                         Download the technical datasheet and
                                                                                                         consult the health and safety document on
                                                                                                         our new site: www.parex.co.uk
     REVLASURE
     MINERAL BASED PAINT FOR RENOVATING AND MAINTAINING RENDER




     DESCRIPTION                                    SUBSTRATES                                                                    TECHNICAL CHARACTERISTICS
24
     A decorative stain designed for                SUITABLE FOR                                                                  COMPOSITION
     rejuvenating, renovating or maintaining         ■   Old or new single-layer renders and                                       ■   Appearance in pot: smooth liquid, white
     mineral coatings back to their former state.        traditional hydraulic coatings, with a                                        or coloured according to the colour chart.
                                                         surface finish of: scraped, float-                                        ■   Nature: polymer in aqueous phase.
                                                         smoothed, sprayed, smooth sprayed,                                        ■   MVA: 1.30.
                                                         tyrolean, trowel thrown, etc.                                             ■   Dry extracts in weight: 42%.
                                                     ■   Ideal for changing the colour of the                                           in volume: 53%.
                                                         façade without creating a surface coating                                 ■   Drying time at 20ºC and 50% HR:
                                                         found with modern acrylic finishes.                                            Dust free: 1/2 hour.
                                                                                                                                        Dry: 1 hour.
                                                    UNSUITABLE FOR                                                                      Coverable: - 6 hours.
                                                     ■   Wood.
                                                     ■   Plaster and plaster/lime coatings.                                       COMPOSITION
                                                     ■   Painted and waterproofed coatings.                                        ■   NF T 36 005 Family I class 7 b2.
                                                     ■   Coatings of synthetic exterior
                                                         insulation systems.




                                                    The information provided in this document results from our knowledge of the products and our experience. On-site results may vary, in particular
                                                    according to the product application methods adopted. Where application methods not covered by this document are used, customers must request
                                                    specific additional information and/or carry out a representative test before using the products. The above-mentioned information in no way
                                                    constitutes a warranty relative to the use of the products. Our general terms and conditions of sale shall prevail, in any event, on the information
                                                    provided in this document. Prior to application, customers and users are requested to check that they have the latest version of this document.
■   Washable                                         ■   Retains the natural aspects and finish of renders
■   Rapid drying                                     ■   Continues to allow the substrate to breathe
■   Penetrating




INSTRUCTIONS
Must comply with this datasheet and those from BS EN1062.

SUBSTRATE PREPARATION
■   Untreated substrates (not painted or waterproofed) must be cleaned/washed and
    decontaminated to remove dirt, dust, grease, organic pollution, carbonation, etc.
■   The state and quality of substrates must meet the requirements in DTU 59.1 (paint work on
    hydraulic binder-based coatings).
■   In hot, dry weather, dampen substrates (particularly absorbent substrates) the day before
    application. The substrate should be evenly wet, but dried out on the surface.
                                                                                                         PACKAGING
EQUIPMENT                                                                                                10 kg bucket.
■   Wool roller with medium or long strands or powered roller for flat, float-smoothed, rubbed,
    scratched, fine-smoothed substrates.                                                                 STORAGE
■   Brush, roller or AIRLESS type spray for difficult substrates and for medium or coarse                1 year from date of manufacture if
    smooth-textured, tyrolian, trowel thrown, etc finishes.                                              stored in unopened original packing
                                                                                                         in frost-free conditions and away
Clean all tools with water after application. If work is interrupted, leave tools to soak in a           from high temperatures.
bucket of water.
                                                                                                         WARRANTY
PRODUCT PREPARATION                                                                                      Manufacturer's liability.
■   Product is ready to use. Thoroughly mix with a slow speed paddle mixer before using. In
    hot and dry weather, up to 5% maximum water can be added to obtain a consistency that is             REFERENCE DOCUMENTS
    easy to spread or spray.                                                                         ■   NFT 36005.
                                                                                                     ■   DTU 59.1.
APPLICATION
■   According to the substrate and its covering capability, the application can be completed                                                              25
    in either:
    ■ one coat.

    ■ or in two coats (for dark colours, for example) with a minimum delay of 6 hours

      between coats.

CONSUMPTION
■   Between 250 and 600 g/m2 depending on substrate absorption and its surface condition.
                                                                                                         PRECAUTIONS
PRECAUTIONS                                                                                              Read and follow the guidelines in the Health
■   For professional use only.                                                                           and Safety datasheet for this product.
■   Hydrometric conditions and temperature must comply with the specifications in DTU 59.1.
    Minimum temperature 5°C, maximum relative humidity (HR) of 75%; weather not windy,                   TECHNICAL ASSISTANCE
    particularly when spraying.                                                                          PAREX will, on request, provide information
■   Protect all separate elements on the façade (wood, window cills, drainpipes, etc), being             and assistance to companies in relation to the
    especially careful of the surrounding environment when spraying.                                     use of a specific product.
■   Avoid all contact with skin and eyes. If sprayed, rinse thoroughly with plenty of clean water.
                                                                                                         Such     assistance     shall    not   be
ATTENTION: For some old substrates, particularly those with a raised finish (sprayed, smooth             associated with structural and design
sprayed, tyrolean) and with encrusted dirt that has not been removed properly, one coat may              conception, nor assume or accept liability
not be sufficient. Therefore a 2nd coat may prove necessary, with the risk of a slight change            for compliance of substrates, nor
from the initial appearance of the coating.                                                              compliance to instructions provided.

                                                                                                                 Technical Information


                                                                                                            0845 603 5530
                                                                                                                     LOCAL RATE CALL

                                                                                                         Download the technical datasheet and
                                                                                                         consult the health and safety document on
                                                                                                         our new site: www.parex.co.uk
     REVLANE FIXATEUR
     SUBSTRATE STABILISATION




26
     DESCRIPTION                                   TECHNICAL CHARACTERISTICS                                                     INSTRUCTIONS
     White, ready-to-use, synthetic resin-based     Apparent density: 0.8 kg/dm3.                                                EQUIPMENT REQUIRED
     liquid in solvent phase. Reinforces crumbly                                                                                  ■   Woollen roller, brush.
     or porous substrates and acts as grain
     filler.                                                                                                                     Clean all tools with white spirit after
                                                                                                                                 application.
     SUBSTRATES
                                                                                                                                 PRODUCT PREPARATION
     SUITABLE FOR                                                                                                                 ■   Thoroughly mix the product in the bucket
     ■   All internal or external, powdery or                                                                                         until it is of an even consistency.
         pulverised substrates.




                                                   The information provided in this document results from our knowledge of the products and our experience. On-site results may vary, in particular
                                                   according to the product application methods adopted. Where application methods not covered by this document are used, customers must request
                                                   specific additional information and/or carry out a representative test before using the products. The above-mentioned information in no way
                                                   constitutes a warranty relative to the use of the products. Our general terms and conditions of sale shall prevail, in any event, on the information
                                                   provided in this document. Prior to application, customers and users are requested to check that they have the latest version of this document.
APPLICATION
■   Apply REVLANE FIXATEUR using a woollen roller or brush.
■   Allow to dry for 3 to 12 hours, before applying REVLANE REGULATEUR or REVLANE
    ROULE.


CONSUMPTION
■   0.150 to 0.200 litres/m2 per layer.

PRECAUTIONS
■   For professional use only.                                                                       PACKAGING
■   Do not apply to a frozen substrate, where there is a risk of frost, on wet substrates, in rain   15 litre bucket.
    or foggy weather or if there is a strong, hot and dry wind.                                      5 litre bucket.
■   Temperature range : +5°C to + 30ºC.
■   REVLANE FIXATEUR is flammable. Open packaging carefully, do not use near naked flame.            STORAGE
■   Ventilate premises well if applying inside.                                                      1 year from date of manufacture if
■   Protect eyes and skin.                                                                           stored in unopened original packing
■   Do not dispose of residues in drains and water systems.                                          in dry, frost-free conditions away
■   NB: do not use on external thermal insulation systems from the PARISO range and the              from high temperatures.
    RENODECOR system.
                                                                                                     WARRANTY
                                                                                                     Manufacturer's liability.




                                                                                                                                                      27




                                                                                                     PRECAUTIONS
                                                                                                     Read and follow the guidelines in the Health
                                                                                                     and Safety datasheet for this product.

                                                                                                     TECHNICAL ASSISTANCE
                                                                                                     PAREX will, on request, provide information
                                                                                                     and assistance to companies in relation to the
                                                                                                     use of a specific product.

                                                                                                     Such     assistance     shall    not   be
                                                                                                     associated with structural and design
                                                                                                     conception, nor assume or accept liability
                                                                                                     for compliance of substrates, nor
                                                                                                     compliance to instructions provided.

                                                                                                             Technical Information


                                                                                                        0845 603 5530
                                                                                                                 LOCAL RATE CALL

                                                                                                     Download the technical datasheet and
                                                                                                     consult the health and safety document on
                                                                                                     our new site: www.parex.co.uk

				
DOCUMENT INFO