Docstoc

Diamond Grinding Pins qxd

Document Sample
Diamond Grinding Pins qxd Powered By Docstoc
					                                                                                                                    Microfinishing

 Diamond Grinding Pins
                                                                                    1/4” Shank Diamond Grinding Pin
             1/8” Shank Diamond Grinding Pin


                                                                      3/8” Shank Diamond Grinding Pin
Titan Diamond Grinding Pins are offered in 52 sizes, 2 grits and 3 shank diameters. Our smaller sizes are available at .010”
intervals. 52 different pin sizes offer the operator a pin size that is very close to the hole diameter being ground. This means a
more rigid pin which minimizes chances of whip and run-out of true hole roundness. For true roundness, and to prevent bell-
mouthing in internal or jig grinding, it is best to feed the pin all the way through the hole wherever possible. The 2 grits avail-
able allow a selection of more efficient grain size, depending on the finish desired, the material being ground, and the amount
of stock to be removed. A choice of 3 shank diameters: 1/8”, 1/4” and 3/8”, means an easy size to chuck in any machine, plus
rigidity for long life. The 1/8” shanks are hardened to 40-45 Rockwell C Scale, the 1/4” and 3/8” to 60-65 hardness.

Titan Diamond Grinding Pins have a diamond concentration of 150% and come in 80/100 or 200/240 grit. They are bonded
with the famous CHROME-LOK Bond. This unique bond prevents the old problem of abrasive dust covering the work surface
and machine parts, thus prolonging the life of jig grinders and borers. The diamond grits are uniform in size so that all individ-
ual grains are cutting at all times.

Titan Diamond Grinding pins never need dressing! If a diamond mandrel stops cutting prematurely, it may be due to clogging.
This condition can quickly be alleviated by running the pin in the grinder and holding against it either a soft type dressing stick
such as used for other types of diamond wheels or a piece of hardwood powdered with aluminum oxide or silicon carbide pow-
der.

Recommended Feeds: in internal or jig grinders should not exceed .0002” to .0005” per pass for maximum life of these man-
drels. A coolant is not necessary unless grinding is being done on the face and periphery at the same time.

Steel Shanks in Three Diameters: We find no proven advantage to carbide shanks, all shanks are hardened and centerless
ground to .0005” Concentricity and a tolerance of + .0000” - .0002”. The 1/8” shanks have a hardness of 45-50 Rockwell C
Scale, while the 1/4” and 3/8” are hardened to 58-60 Rockwell C Scale. Maximum rigidity and safety are thus provided for the
work to be preformed.

Diamond Applications:

Diamond is used for cutting or grinding hard, brittle and abrasive materials, but it is not suitable for grinding high carbon-steel.
This is because iron has an affinity for carbon (which is what diamond is) at a high temperature.

Diamond tools are used for grinding hard or very abrasive materials, such as:

•Tungsten Carbide
•Fiberglass
•Stone and marble
•Ferrite
•Composite materials
•Non-ferrous metals
•Industrial ceramics
•Rubber
•Re-inforced plastics
•Glass


                                  www.TitanToolSupply.com • Phone: 716-873-9907
                                  Titan Tool Supply, Inc. • 68 Comet Avenue, Buffalo NY 14216
                                  Phone: 716-873-9907 • Fax: 716-873-9998 • E-mail: info@titantoolsupply.com • www.TitanToolSupply.com
                                                                                                          Microfinishing

 Order #    ØD         T         L1            L          ØY        200/240 Grit 80/100 Grit
   2900    0.020”   0.079”     0.250”       2.156”        1/8”        $10.20
 2900XL    0.020”   0.079”     0.250”       2.156”        1/4”        $11.05
  2900A    0.029”   0.079”     0.250”       2.156”        1/8”        $10.20
2900AXL    0.029”   0.079”     0.250”       2.156”        1/4”        $11.05
   2901    0.039”   0.079”     0.250”       2.156”        1/8”        $10.20       $10.20
 2901XL    0.039”   0.079”     0.250”       2.156”        1/4”        $10.75       $10.75
  2901B    0.049”   0.079”     0.250”       2.156”        1/8”        $10.20       $10.20
2901BXL    0.049”   0.079”     0.250”       2.156”        1/4”        $11.05       $11.05
  2901A    0.059”   0.118”     0.500”       2.156”        1/8”        $10.45       $10.45
2901AXL    0.059”   0.118”     0.500”       2.156”        1/4”        $11.05       $11.05
 2901C     0.069”   0.118”     0.500”       2.156”        1/8”        $10.85       $10.85
2901CXL    0.069”   0.118”     0.500”       2.156”        1/4”        $11.50       $11.50
   2902    0.079”   0.157”     0.500”       2.156”        1/8”        $10.75       $10.75
 2902XL    0.079”   0.157”     0.500”       2.156”        1/4”        $11.50       $11.50
  2902A    0.089”   0.157”     0.500”       2.156”        1/8”        $11.20       $11.20
2902AXL    0.089”   0.157”     0.500”       2.156”        1/4”        $11.60       $11.60
  2902B    0.099”   0.157”     0.500”       2.156”        1/8”        $11.30       $11.30
2902BXL    0.099”   0.157”     0.500”       2.156”        1/4”        $11.85       $11.85
 2902C     0.109”   0.157”     0.500”       2.156”        1/8”        $11.95       $11.95
2902CXL    0.109”   0.157”     0.500”       2.156”        1/4”        $11.95       $11.95
   2903    0.118”   0.157”     0.625”       2.156”        1/8”        $11.95       $11.95
 2903XL    0.118”   0.157”     0.625”       2.156”        1/4”        $12.95       $12.95
  2903A    0.130”   0.197”      N/A         2.156”        1/8”        $13.10       $13.10
2903AXL    0.130”   0.197”     0.625”       2.156”        1/4”        $13.75       $13.75
                                                                                                            1/8” & 1/4”
  2903B    0.140”   0.197”      N/A         2.156”        1/8”        $13.85       $13.85                     Shank
2903BXL    0.140”   0.197”     0.625        2.156”        1/4”        $13.95       $13.95
   2904    0.157”   0.197”      N/A         2.156”        1/8”        $14.25       $14.25
 2904XL    0.157”   0.197”     0.625”       2.156”        1/4”        $14.50       $14.50
  2904A    0.177”   0.236”      N/A         2.156”        1/8”        $17.95       $17.95
2904AXL    0.177”   0.236”     0.625”       2.156”        1/4”        $18.75       $18.75
   2905    0.197”   0.236”      N/A         2.156”        1/8”        $18.90       $18.90
 2905XL    0.197”   0.236”     0.625”       2.156”        1/4”        $19.25       $19.25
   2908    0.236”   0.275”      N/A         2.156”        1/8”        $21.25       $21.25
 2908XL    0.236”   0.275”     1.000”       3.000”        1/4”        $21.75       $21.95
  2908A    0.256”   0.275”     1.000”       3.000”        1/4”        $22.95       $22.95
   2909    0.315”   0.315”      N/A         3.000”        1/4”        $25.35       $25.35
  2910F    0.335”   0.315”      N/A         3.000”        1/4”        $25.95       $25.95
   2911    0.394”   0.197”      N/A         3.000”        1/4”        $27.95       $27.95
 2911XL    0.394”   0.197”      N/A         3.500”        3/8”        $29.95       $29.95
   2912    0.394”   0.394”      N/A         3.000”        1/4”        $31.95       $31.95
 2912XL    0.394”   0.394”      N/A         3.500”        3/8”        $32.95       $32.95
 2913D     0.473”   0.394”      N/A         3.000”        1/4”        $37.95       $37.95
2913DXL    0.473”   0.394”      N/A         3.500”        3/8”        $39.95       $39.95
   2914    0.591”   0.197”      N/A         3.000”        1/4”        $41.95       $41.95
 2914XL    0.591”   0.197”      N/A         3.500”        3/8”        $43.95       $43.95
   2915    0.591”   0.394”      N/A         3.000”        1/4”        $45.95       $45.95
 2915XL    0.591”   0.394”      N/A         3.500”        3/8”        $47.95       $47.95
   2917    0.730”   0.394”      N/A         3.000”        1/4”        $66.95       $66.95
 2917XL    0.730”   0.394”      N/A         3.500”        3/8”        $68.95       $68.95
 2919XL    1.000”   0.394”      N/A         3.500”        3/8”        $77.95       $77.95
                                                                                                                 3/8”
 2920XL    1.250”   0.394”      N/A         3.500”        3/8”        $80.95       $80.95                       Shank
 2921XL    1.500    0.394”      N/A         3.500”        3/8”        $87.95       $87.95

                        Titan Tool Supply, Inc. • 68 Comet Avenue, Buffalo NY 14216
                        Phone: 716-873-9907 • Fax: 716-873-9998 • E-mail: info@titantoolsupply.com • www.TitanToolSupply.com

				
DOCUMENT INFO